Immobilization Of Biocatalysts Research Articles

Photopolymerization of L-DOPA-Alginate Immobilized Cell Wall Laccase for Textile Dye Decolorization

Alginate is a naturally occurring polymer derived from brown algae biomass, which has numerous applications in various fields. Chemical modification of alginate is widely used to improve alginate’s physicochemical properties and provide new potential for multiple applications. In this article, we modified alginate with L-DOPA, using periodate oxidation and reductive amination, to obtain more suitable biopolymer for biocatalyst immobilization and hydrogel formation. Obtained modified alginate was used for the immobilization of laccase on cell walls. For this purpose, laccase from Streptomyces cyaneus was expressed on the surface of Saccharomyces cerevisiae EBY100 cells. The obtained cell wall laccase was immobilized within L-DOPA-alginate beads by crosslinking the L-DOPA-alginate with calcium ions and laccase. The effect of additional crosslinking of beads by green light-induced photopolymerization with eosin Y was investigated. The immobilized laccase systems were used for dye decolorization and investigated in multiple treatment processes. Beads with L-DOPA-alginate with a higher degree of modification (5.0 mol%) showed higher enzymatic activity and better decolorization efficiency than those with a lower degree of modification (2.5 mol%). Obtained immobilized biocatalysts are suitable for decolorizing dye Evans Blue due to their high efficiency and reusability.

Correction: Preparation and characterisation of gelatine hydrogels predisposed to use as matrices for effective immobilisation of biocatalysts

Correction: Preparation and characterisation of gelatine hydrogels predisposed to use as matrices for effective immobilisation of biocatalysts

A paradigm shift for biocatalytic microreactors: Decoupling application from reactor design

Microreactors have been successfully applied to execute a broad range of biotransformations in flow. However, microreactors have typically been designed with a specific biotransformation or a specific biocatalyst immobilization method in mind, constraining their wider applicability. Furthermore, their design is typically either applicable for whole-cell or for enzyme biocatalysis, but not for both. We present a novel microreactor design which offers cartridge-like insertion of both immobilised enzymes and cells. A T-shaped lid opens and closes the reaction chamber (whilst leaving the rest of the microreactor unchanged), enables the easy insertion of immobilised biocatalysts, and thus allows the user to configure different reactor types. We demonstrated this novel concept showing three different reactor types: a hydrogel microreactor containing entrapped E. coli cells overexpressing transketolase (volumetric productivity of 2.23 ± 0.83 mmoll-ERY Lvoid1 min1), a packed-bed microreactor containing commercial beads with immobilised Candida antarctica lipase B (volumetric productivity of 317.69 ± 96.74 mmolBB Lvoid1 min1), and a micropillar microreactor containing surface-immobilised ω-transaminase (volumetric productivity of 0.08 ± 0.02 mmolACP Lvoid1 min1). The proposed design showed consistency and robustness for 10 consecutive T-shaped lid ‘open and close’ cycles and withstood the pressure of at least 4 bar. Design analysis further included Computational Fluid Dynamics models and Residence Time Distribution measurements. The presented design offers a standardised approach for multiple applications, underpinning process development and paving the way for off-the-shelf microreactor technology for biocatalysis.

Biohybrid materials comprising an artificial peroxidase and differently shaped gold nanoparticles

The immobilization of an artificial peroxidase (FeMC6*a) onto gold nanomaterials provides insights into the effect of the support shape on catalytic activity.

Polymer-Based Conductive Nanocomposites for the Development of Bioanodes Using Membrane-Bound Enzyme Systems of Bacteria Gluconobacter oxydans in Biofuel Cells

The development of biofuel cells (BFCs) currently has high potential since these devices can be used as alternative energy sources. This work studies promising materials for biomaterial immobilization in bioelectrochemical devices based on a comparative analysis of the energy characteristics (generated potential, internal resistance, power) of biofuel cells. Bioanodes are formed by the immobilization of membrane-bound enzyme systems of Gluconobacter oxydans VKM V-1280 bacteria containing pyrroloquinolinquinone-dependent dehydrogenases into hydrogels of polymer-based composites with carbon nanotubes. Natural and synthetic polymers are used as matrices, and multi-walled carbon nanotubes oxidized in hydrogen peroxide vapor (MWCNTox) are used as fillers. The intensity ratio of two characteristic peaks associated with the presence of atoms C in the sp3 and sp2 hybridization for the pristine and oxidized materials is 0.933 and 0.766, respectively. This proves a reduced degree of MWCNTox defectiveness compared to the pristine nanotubes. MWCNTox in the bioanode composites significantly improve the energy characteristics of the BFCs. Chitosan hydrogel in composition with MWCNTox is the most promising material for biocatalyst immobilization for the development of bioelectrochemical systems. The maximum power density was 1.39 × 10-5 W/mm2, which is 2 times higher than the power of BFCs based on other polymer nanocomposites.

Controlling the Adsorption of β-Glucosidase onto Wrinkled SiO2 Nanoparticles To Boost the Yield of Immobilization of an Efficient Biocatalyst.

β-Glucosidase (BG) catalyzes the hydrolysis of cellobiose to glucose, a substrate for fermentation to produce the carbon-neutral fuel bioethanol. Enzyme thermal stability and reusability can be improved through immobilization onto insoluble supports. Moreover, nanoscaled matrixes allow for preserving high reaction rates. In this work, BG was physically immobilized onto wrinkled SiO2 nanoparticles (WSNs). The adsorption procedure was tuned by varying the BG:WSNs weight ratio to achieve the maximum controllability and maximize the yield of immobilization, while different times of immobilization were monitored. Results show that a BG:WSNs ratio equal to 1:6 wt/wt provides for the highest colloidal stability, whereas an immobilization time of 24 h results in the highest enzyme loading (135 mg/g of support) corresponding to 80% yield of immobilization. An enzyme corona is formed in 2 h, which gradually disappears as the protein diffuses within the pores. The adsorption into the silica structure causes little change in the protein secondary structure. Furthermore, supported enzyme exhibits a remarkable gain in thermal stability, retaining complete folding up to 90 °C. Catalytic tests assessed that immobilized BG achieves 100% cellobiose conversion. The improved adsorption protocol provides simultaneously high glucose production, enhanced yield of immobilization, and good reusability, resulting in considerable reduction of enzyme waste in the immobilization stage.

Magnetic Multi-Enzymatic System for Cladribine Manufacturing.

Enzyme-mediated processes have proven to be a valuable and sustainable alternative to traditional chemical methods. In this regard, the use of multi-enzymatic systems enables the realization of complex synthetic schemes, while also introducing a number of additional advantages, including the conversion of reversible reactions into irreversible processes, the partial or complete elimination of product inhibition problems, and the minimization of undesirable by-products. In addition, the immobilization of biocatalysts on magnetic supports allows for easy reusability and streamlines the downstream process. Herein we have developed a cascade system for cladribine synthesis based on the sequential action of two magnetic biocatalysts. For that purpose, purine 2'-deoxyribosyltransferase from Leishmania mexicana (LmPDT) and Escherichia coli hypoxanthine phosphoribosyltransferase (EcHPRT) were immobilized onto Ni2+-prechelated magnetic microspheres (MagReSyn®NTA). Among the resulting derivatives, MLmPDT3 (activity: 11,935 IU/gsupport, 63% retained activity, operational conditions: 40 °C and pH 5-7) and MEcHPRT3 (12,840 IU/gsupport, 45% retained activity, operational conditions: pH 5-8 and 40-60 °C) emerge as optimal catalysts for further synthetic application. Moreover, the MLmPDT3/MEcHPRT3 system was biochemically characterized and successfully applied to the one-pot synthesis of cladribine under various conditions. This methodology not only displayed a 1.67-fold improvement in cladribine synthesis (compared to MLmPDT3), but it also implied a practically complete transformation of the undesired by-product into a high-added-value product (90% conversion of Hyp into IMP). Finally, MLmPDT3/MEcHPRT3 was reused for 16 cycles, which displayed a 75% retained activity.

Surface display of (R)-carbonyl reductase on Escherichia coli as biocatalyst for recycling biotransformation of 2-hydroxyacetophenone

The purified (R)-Carbonyl reductase (RCR) is widely applied in the synthesis of chiral compounds, but often involves tedious procedures and high production costs of protein separation and purification. A surface immobilization of biocatalyst on cell surface for biotransformation is an option for ease enzyme separation and recycling. In this study, the RCR from Candida parapsilosis was immobilized on the surface of E. coli using the Lpp–OmpA and EhaA anchors, showing that the Lpp–OmpA is better for displaying the target molecules in terms of enzyme activities, product formation, and display efficiency. By deleting the NAD+ degrading enzyme UshA, the whole-cell biocatalytic activity was two-fold higher than that of the original strain. The created biocatalyst can retain about 80% of its catalytic activity after four rounds of recycling, reached the conversion rate of 83.5% within 30 mins with the substrate (R)-PED concentration of 1 mM. This study provides a novel strategy for 2-hydroxy acetophenone synthesis using the surface display of the enzyme on the cell while avoiding enzyme purification and side reactions from the host.

α‐Ketobutyrate Production under Continuous‐Flow Conditions Catalyzed by Immobilized L‐Methionine γ‐Lyase

Abstractl‐Methionine γ‐lyase (MGL) is a PLP‐dependent enzyme which catalyzes the α, γ‐elimination reaction in sulfur containing amino acids, such as L‐methionine and L‐cysteine. Its major applications are on metabolic restriction of methionine to cancer cells, food industry (cheese flavor) and for the synthesis of d and l‐homoalanine. Herein, we present the immobilization and use of this new immobilized biocatalyst under batch and continuous‐flow conditions. The best optimized continuous‐flow condition allowed 89 % conversion in 30 min of residence time with good recyclability of the biocatalyst.

Role of catalyst supports in biocatalysis

AbstractBiocatalysis utilizes enzymes and microbial cells as catalysts for a wide range of applications in biotechnology. Immobilization of biocatalysts on various materials has several advantages, including the capacity for reuse, quick reaction termination, easy biocatalyst recovery and operational stability. The present article focuses on the use of material supports for developing immobilized biocatalysts in applications related to energy, environment and chemical synthesis. The work provides a comprehensive overview of a broad class of materials, including organic, inorganic and composites, that have been shown to be prosperous candidates to support the immobilization of enzymes and microbial cells. It also highlights the properties of nanomaterial support such as large surface area and comfort compartment for immobilization. The availability of different types of materials as catalyst support provides an opportunity to understand and develop efficient biocatalytic systems. The choice of selecting a catalyst support will mostly depend on the interaction of the material with the enzyme or microbial cell. Finally, potential challenges, future approaches in developing immobilized biocatalytic systems for various applications and novel material supports are suggested. © 2022 Society of Chemical Industry (SCI).

3D Printing: An Emerging Technology for Biocatalyst Immobilization.

Employment of enzymes as biocatalysts offers immense benefits across diverse sectors in the context of green chemistry, biodegradability, and sustainability. When compared to free enzymes in solution, enzyme immobilization proposes an effective means of improving functional efficiency and operational stability. The advance of printable and functional materials utilized in additive manufacturing, coupled with the capability to produce bespoke geometries, has sparked great interest toward the 3-dimensional (3D) printing of immobilized enzymes. Printable biocatalysts represent a new generation of enzyme immobilization in a more customizable and adaptable manner, unleashing their potential functionalities for countless applications in industrial biotechnology. This review provides an overview of enzyme immobilization techniques and 3D printing technologies, followed by illustrations of the latest 3D printed enzyme-immobilized industrial and clinical applications. The unique advantages of harnessing 3D printing as an enzyme immobilization technique will be presented, alongside a discussion on its potential limitations. Finally, the future perspectives of integrating 3D printing with enzyme immobilization will be considered, highlighting the endless possibilities that are achievable in both research and industry.

A Magnetosome-Based Platform for Flow Biocatalysis.

Biocatalysis in flow reactor systems is of increasing importance for the transformation of the chemical industry. However, the necessary immobilization of biocatalysts remains a challenge. We here demonstrate that biogenic magnetic nanoparticles, so-called magnetosomes, represent an attractive alternative for the development of nanoscale particle formulations to enable high and stable conversion rates in biocatalytic flow processes. In addition to their intriguing material characteristics, such as high crystallinity, stable magnetic moments, and narrow particle size distribution, magnetosomes offer the unbeatable advantage over chemically synthesized nanoparticles that foreign protein “cargo” can be immobilized on the enveloping membrane via genetic engineering and thus, stably presented on the particle surface. To exploit these advantages, we develop a modular connector system in which abundant magnetosome membrane anchors are genetically fused with SpyCatcher coupling groups, allowing efficient covalent coupling with complementary SpyTag-functionalized proteins. The versatility of this approach is demonstrated by immobilizing a dimeric phenolic acid decarboxylase to SpyCatcher magnetosomes. The functionalized magnetosomes outperform similarly functionalized commercial particles by exhibiting stable substrate conversion during a 60 h period, with an average space–time yield of 49.2 mmol L–1 h–1. Overall, our results demonstrate that SpyCatcher magnetosomes significantly expand the genetic toolbox for particle surface functionalization and increase their application potential as nano-biocatalysts.

Enzyme Immobilization and Co-Immobilization: Main Framework, Advances and Some Applications

Enzymes are outstanding (bio)catalysts, not solely on account of their ability to increase reaction rates by up to several orders of magnitude but also for the high degree of substrate specificity, regiospecificity and stereospecificity. The use and development of enzymes as robust biocatalysts is one of the main challenges in biotechnology. However, despite the high specificities and turnover of enzymes, there are also drawbacks. At the industrial level, these drawbacks are typically overcome by resorting to immobilized enzymes to enhance stability. Immobilization of biocatalysts allows their reuse, increases stability, facilitates process control, eases product recovery, and enhances product yield and quality. This is especially important for expensive enzymes, for those obtained in low fermentation yield and with relatively low activity. This review provides an integrated perspective on (multi)enzyme immobilization that abridges a critical evaluation of immobilization methods and carriers, biocatalyst metrics, impact of key carrier features on biocatalyst performance, trends towards miniaturization and detailed illustrative examples that are representative of biocatalytic applications promoting sustainability.

Thermal Annealing‐Enhanced Bioelectrocatalysis in Membraneless Glucose/Oxygen Biofuel Cell based on Hydrophilic Carbon Fibers

AbstractThe electrode material is a pivotal component in achieving efficient electron transfer in an enzymatic biofuel cell (EBFC). Herein, novel hydrophilic carbon fibers (HCFs) with a helical structure are synthesized through chemical vapor deposition and are used as an electrode material for the immobilization of biocatalysts to fabricate bioelectrodes, where glucose dehydrogenase, serving as the anodic enzyme, is co‐immobilized with 1,4‐naphthoquinone on the HCFs for the catalysis of the glucose oxidation reaction (GOR), and bilirubin oxidase, as the cathodic enzyme, is co‐immobilized with protoporphyrin IX for the catalysis of the oxygen reduction reaction (ORR). It is found that thermal annealing the HCFs improves the bioelectrocatalytic performances of the as‐fabricated bioanode for the GOR and biocathode for the ORR, owing to the enhanced electron transfer kinetics. Subsequently, a membraneless glucose/O2 EBFC assembled by using the as‐synthesized bioelectrodes is able to generate a high open circuit voltage of 0.8 V and a maximum power density of 0.7 mW cm−2 at 0.44 V with good operational stability. The practicability in fabricating membraneless EBFCs makes the synthesized HCFs promising in miniature bioenergy devices.

Emerging Solutions for in Vivo Biocatalyst Immobilization: Tailor-Made Catalysts for Industrial Biocatalysis

In industry, enzymes are often immobilized to generate more stable enzyme preparations that are easier to store, handle, and recycle for repetitive use. Traditionally, enzymes are bound to inorganic carrier materials, which requires case-to-case optimization and incurs additional labor and costs. Therefore, with the advent of rational protein design strategies as part of bottom-up synthetic biology approaches, numerous immobilization methods have been developed that enable the one-step production and immobilization of enzymes onto biogenic carrier materials often directly within the production host, which we here refer to as in vivo immobilization. As a result, nano- to micro-meter-sized functionalized biomaterials, or biologically produced enzyme immobilizates, are obtained that can directly be used for synthetic purposes. In this Perspective, we provide an overview over established and recently emerging in vivo enzyme immobilization methods, with special emphasis on their applicability for (industrial) biocatalysis. For each approach, we present fundamental working principles as well as advantages and limitations guiding future research avenues toward sustainable applications in the bioindustry.

Immobilization of Phenylalanine Ammonia-lyase via EDTA Based Metal Chelate Complexes – Optimization and Prospects

Immobilized metal ion affinity chromatography principles were applied for selective immobilization of recombinant polyhistidine tag fused phenylalanine ammonia-lyase from parsley (PcPAL) on porous polymeric support with aminoalkyl moieties modified with an EDTA dianhydride (EDTADa)-derived chelator and charged with transition metal ions. Out of the five investigated metal ions - Fe3+, Co2+, Ni2+, Cu2+, Zn2+ - the best biocatalytic activity of PcPAL was achieved when the enzyme was immobilized on the Co2+ ion-charged support (31.8 ± 1.2 U/g). To explore the features this PcPAL obtained by selective immobilization, the thermostability and reusability of this PAL biocatalyst were investigated. To maximize the activity of the immobilized PcPAL the surface functionalization of the aminoalkylated polymeric carrier was fine-tuned with using glycidol as a thinning group beside EDTADa. The maximal activity yield (YA=103 %) was earned when the EDTADa and glycidol were used in 1 to 24 ratio. The reversibility of the immobilization method allowed the development of a support regeneration protocol which enables easy reuse of the functionalized support in case of enzyme inactivation.

Membranes, immobilization, and protective strategies for enzyme fuel cell stability

Enzymatic biofuel cells (EBFCs) for direct biochemical energy conversion are a promising candidate for addressing the growing power demands for low-power implantable and wearable devices. EBFCs comprise electrodes modified with biorecognition elements that produce bioelectrical energy from the redox activity of an organic fuel (sugars, alcohols) and an oxidant at the surface of the anode and cathode. The biorecognition layers are carefully constructed using enzymes immobilized on the electrode via surface modification strategies to increase the enzyme loading and hence the turnover rate. In addition, a polymer encapsulation membrane is implemented to create a protective microenvironment for the enzymes to enhance the biofuel cell's productivity. In this brief review, the different methods carried out to improve the stability of the EBFC system are discussed. New trends and key challenges are presented to illustrate the importance of the various materials implemented in extending the operational lifetime of EBFCs. • Wearable and implantable platforms are used for attractive energy harnessing from biofluids. • Applications of the membrane materials in enzymatic biofuel cells are discussed. • Biocatalyst immobilization strategies for enzymatic biofuel cells are described. • Electron transfer processes to improve the stability and power output of the enzymatic biofuel cell system are discussed.

Development of a Sensitive Self-Powered Glucose Biosensor Based on an Enzymatic Biofuel Cell.

Biofuel cells allow for constructing sensors that leverage the specificity of enzymes without the need for an external power source. In this work, we design a self-powered glucose sensor based on a biofuel cell. The redox enzymes glucose dehydrogenase (NAD-GDH), glucose oxidase (GOx), and horseradish peroxidase (HRP) were immobilized as biocatalysts on the electrodes, which were previously engineered using carbon nanostructures, including multi-wall carbon nanotubes (MWCNTs) and reduced graphene oxide (rGO). Additional polymers were also introduced to improve biocatalyst immobilization. The reported design offers three main advantages: (i) by using glucose as the substrate for the both anode and cathode, a more compact and robust design is enabled, (ii) the system operates under air-saturating conditions, with no need for gas purge, and (iii) the combination of carbon nanostructures and a multi-enzyme cascade maximizes the sensitivity of the biosensor. Our design allows the reliable detection of glucose in the range of 0.1–7.0 mM, which is perfectly suited for common biofluids and industrial food samples.

Enzyme entrapment, biocatalyst immobilization without covalent attachment

The entrapment of enzymes in organic, inorganic or biomaterials can yield active immobilized biocatalysts for chemical transformations without the need to form covalent bonds with the protein.

Immobilization of Aldoxime Dehydratases and Their Use as Biocatalysts in Aqueous Reaction Media

Immobilization of biocatalysts is a current topic in research enabling the easy recovery of catalysts from the reaction medium after the reaction, and it is often accompanied by a stabilization of the catalysts, which enables recycling. Within our ongoing research on the utilization of aldoxime dehydratases in the cyanide-free synthesis of nitriles through dehydration of readily available aldoximes, a screening of different immobilization methods for free enzymes was performed. The applied immobilization methods are based on covalent binding and hydrophobic interactions of the enzyme with the carrier material and whole-cell immobilization in calcium alginate beads with and without subsequent coating. In our study, we found that the immobilization with purified free aldoxime dehydratases from OxdRE (Rhodococcus erythropolis) and OxdB (Bacillus sp. strain OxB-1) leads to high immobilization efficiencies, but also to a strong loss of activity with a residual activity of <20%, regardless of the carrier material used. However, when using whole cells for immobilization instead of purified enzymes, we could increase the residual activity significantly. Escherichia coli BL21(DE3)-CodonPlus-RIL OxdRE and OxdB whole cells were entrapped in calcium alginate beads and coated with silica using tetraethylorthosilicate (TEOS), leading to immobilized catalysts with up to 75% residual activity and a higher stability compared to the free whole cells. Even after three rounds of recycling, which corresponds to a 3 d reaction time, the immobilized OxdB whole cells showed a residual activity of 85%.