Immediate Release Solid Oral Dosage Research Articles

Establishing Virtual Bioequivalence and Clinically Relevant Specifications for Omeprazole Enteric-Coated Capsules by Incorporating Dissolution Data in PBPK Modeling.

Currently, Biopharmaceutics Classification System (BCS) classes I and III are the only biological exemptions of immediate-release solid oral dosage forms eligible for regulatory approval. However, through virtual bioequivalence (VBE) studies, BCS class II drugs may qualify for biological exemptions if reliable and validated modeling is used. Here, we sought to establish physiologically based pharmacokinetic (PBPK) models, in vitro-in vivo relationship (IVIVR), and VBE models for enteric-coated omeprazole capsules, to establish a clinically-relevant dissolution specification (CRDS) for screening BE and non-BE batches, and to ultimately develop evaluation criteria for generic omeprazole enteric-coated capsules. To establish omeprazole's IVIVR based on the PBPK model, we explored its in vitro dissolution conditions and then combined in vitro dissolution profile studies with in vivo clinical trials. The predicted omeprazole pharmacokinetics (PK) profiles and parameters closely matched the observed PK data. Based on the VBE results, the bioequivalence study of omeprazole enteric-coated capsules required at least 48 healthy Chinese subjects. Based on the CRDS, the capsules' in vitro dissolution should not be < 28%-54%, < 52%, or < 80% after two, three, and six hours, respectively. Failure to meet these dissolution criteria may result in non-bioequivalence. Here, PBPK modeling and IVIVR methods were used to bridge the in vitro dissolution of the drug with in vivo PK to establish the BE safety space of omeprazole enteric-coated capsules. The strategy used in this study can be applied in BE studies of other BCS II generics to obtain biological exemptions and accelerate drug development.

The bioequivalence study design recommendations for immediate-release solid oral dosage forms in the international pharmaceutical regulators programme participating regulators and organisations: differences and commonalities.

Bioequivalence (BE) studies are considered the standard for demonstrating that the performance of a generic drug product in the human body is sufficiently similar to that of its comparator product. The objective of this article is to describe the recommendations from participating Bioequivalence Working Group for Generics (BEWGG) members of the International Pharmaceutical Regulators Programme (IPRP) regarding the conduct and acceptance criteria for BE studies of immediate release solid oral dosage forms. A survey was conducted among BEWGG members regarding their BE recommendations and requirements related to study subjects, study design, sample size, single or multiple dose administration, study conditions (fasting or fed), analyte to be measured, selection of product strength, drug content, handling of endogenous substances, BE acceptance criteria, and additional design aspects. All members prefer conducting single dose cross-over designed studies in healthy subjects with a minimum of 12 subjects and utilizing the parent drug data to assess BE. However, differences emerged among the members when the drug's pharmacokinetics and pharmacodynamics become more complex, such that the study design (e.g., fasting versus fed conditions) and BE acceptance criteria (e.g., highly variable drugs, narrow therapeutic index drugs) may be affected. The survey results and discussions were shared with the ICH M13 Expert Working Group (EWG) and played an important role in identifying and analyzing gaps during the harmonization process. The draft ICH M13A guideline developed by the M13 EWG was endorsed by ICH on 20 December 2022, under Step 2.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Isavuconazonium Sulfate

A Biopharmaceutics Classification System (BCS)-based biowaiver monograph is presented for isavuconazonium sulfate. A BCS-based biowaiver is a regulatory option to substitute appropriate in vitro data for in vivo bioequivalence studies. Isavuconazonium sulfate is the prodrug of isavuconazole, a broad-spectrum azole antifungal indicated for invasive fungal infections. While the prodrug can be classified as a BCS Class III drug with high solubility but low permeability, the parent drug can be classified as a BCS Class II drug with low solubility but high permeability. Interestingly, the in vivo behavior of both is additive and leads isavuconazonium sulfate to act like a BCS class I drug substance after oral administration. In this work, experimental solubility and dissolution data were evaluated and compared with available literature data to investigate whether it is feasible to approve immediate release solid oral dosage forms containing isavuconazonium sulfate according to official guidance from the FDA, EMA and/or ICH. The risks associated with waiving a prodrug according to the BCS-based biowaiver guidelines are reviewed and discussed, noting that current regulations are quite restrictive on this point. Further, results show high solubility but instability of isavuconazonium sulfate in aqueous media. Although experiments on the dissolution of the capsule contents confirmed ‘very rapid’ dissolution of the active pharmaceutical ingredient (API) isavuconazonium sulfate, its release from the commercial marketed capsule formulation Cresemba is limited by the choice of capsule shell material, providing an additional impediment to approval of generic versions via the BCS-Biowaiver approach.

Continuous Manufacturing of Solvent-Free Cyclodextrin Inclusion Complexes for Enhanced Drug Solubility via Hot-Melt Extrusion: A Quality by Design Approach.

Conventional cyclodextrin complexation enhances the solubility of poorly soluble drugs but is solvent-intensive and environmentally unfavorable. This study evaluated solvent-free hot-melt extrusion (HME) for forming cyclodextrin inclusion complexes to improve the solubility and dissolution of ibuprofen (IBU). Molecular docking confirmed IBU's hosting in Hydroxypropyl-β-cyclodextrin (HPβ-CD), while phase solubility revealed its complex stoichiometry and stability. In addition, an 11 mm twin-screw co-rotating extruder with PVP VA-64 as an auxiliary substance aided the complex formation and extrusion. Using QbD and the Box-Behnken design, we studied variables (barrel temperature, screw speed, and polymer concentration) and their impact on solubility and dissolution. The high polymer concentration and high screw speeds positively affected the dependent variables. However, higher temperatures had a negative effect. The lowest barrel temperature set near the Tg of the polymer, when combined with high polymer concentrations, resulted in high torques in HME and halted the extrusion process. Therefore, the temperature and polymer concentration should be selected to provide sufficient melt viscosities to aid the complex formation and extrusion process. Studies such as DSC and XRD revealed the amorphous conversion of IBU, while the inclusion complex formation was demonstrated by ATR and NMR studies. The dissolution of ternary inclusion complexes (TIC) produced from HME was found to be ≥85% released within 30 min. This finding implied the high solubility of IBU, according to the US FDA 2018 guidance for highly soluble compounds containing immediate-release solid oral dosage forms. Overall, the studies revealed the effect of various process parameters on the formation of CD inclusion complexes via HME.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Levocetirizine Dihydrochloride

Levocetirizine, a histamine H1-receptor antagonist, is prescribed to treat uncomplicated skin rashes associated with chronic idiopathic urticaria as well as the symptoms of both seasonal and continual allergic rhinitis. In this monograph, the practicality of using Biopharmaceutics Classification System (BCS) based methodologies as a substitute for pharmacokinetic studies in human volunteers to appraise the bioequivalence of immediate-release (IR) oral, solid dosage forms containing levocetirizine dihydrochloride was investigated, using data from the literature and in-house testing.Levocetirizine's solubility and permeability properties, as well as its dissolution from commercial products, its therapeutic uses, therapeutic index, pharmacokinetics and pharmacodynamic traits, were reviewed in accordance with the BCS, along with any reports in the literature about failure to meet bioequivalence (BE) requirements, bioavailability issues, drug-excipient interactions as well as other relevant information. The data presented in this monograph unequivocally point to classification of levocetirizine in BCS Class 1. For products that are somewhat supra-equivalent or somewhat sub-equivalent, clinical risks are expected to be insignificant in light of levocetirizine's wide therapeutic index and unlikelihood of severe adverse effects. After careful consideration of all the information available, it was concluded that the BCS-based biowaiver can be implemented for products which contain levocetirizine dihydrochloride, provided (a) the test product comprises excipients that are typically found in IR oral, solid drug products that have been approved by a country belonging to or associated with ICH and are used in quantities that are typical for such products, (b) data supporting the BCS-based biowaiver are gathered using ICH-recommended methods, and (c) all in vitro dissolution requirements specified in the ICH guidance are met by both the test and comparator products (in this case, the comparator is the innovator product).

In Vitro Predictive Dissolution Test Should Be Developed and Recommended as a Bioequivalence Standard for the Immediate-Release Solid Oral Dosage Forms of the Highly Variable Mycophenolate Mofetil.

The prodrug mycophenolate mofetil (MMF), which is presystemically hydrolyzed into the pharmacologically active compound mycophenolic acid (MPA), has been widely used for the prophylaxis of acute allograft rejection in solid organ transplantation. However, the huge variability in the plasma concentration level makes the development of MMF drug products difficult due to the great challenge of meeting the traditional bioequivalence (BE) limits. Numerous models have been developed in the past decade to explain the variability, with the emphasis on characterizing the enterohepatic circulation. While the variability arising from systemic appearance can also contribute to the remarkable MPA variability to a great extent, it has been ignored for long for this Biopharmaceutics Classification System class 2 drug. To improve the design of the BE study for this highly variable (HV) drug, the variability of MMF pharmacokinetic (PK) profiles focusing on the absorption process was explored in a population approach. A total of 81 Chinese adult liver transplant recipients were enrolled and had their plasma concentrations of MPA and its metabolites measured by HPLC during one visit or multiple visits in a long-term MMF regimen. The population models were developed using NONMEM, and the data and the results of the model were analyzed by R. Two population PK models of MMF focusing on the absorption process were developed based on the plasma concentrations of MPA and its major metabolite 7-O-MPA-β-glucuronide (MPAG). The MPA PK profiles were best characterized by a two-compartment disposition model with zero inter-individual variability (IIV) of elimination coefficient (K20), lag time, but considerable intra-individual variability (IAV) in the form of inter-occasion variability regarding systemic appearance coefficient, K20, and central volume of distribution, when just using MPA plasma concentrations as observations. The second model took into consideration the EHC by including MPAG profiles as well. The results from both models showcased that the IAV played a far more significant role than the IIV in accounting for the variability of the MMF systemic appearance. This is in line with what was found in the BE study: the within-subject variability (WSV) of BE measures largely exceeded the corresponding between-subject variability. The great WSV of MMF can be mechanistically explained by the interplay of dissolution and solubility with the gastrointestinal (GI) physiological dynamics, especially the gastric emptying (GE) in the fasting state regulated by migrating motor complex, and GE and pH variations in the fed state by the caloric content with irregular patterns of GI motility and secretion. The results implied that for the immediate-release solid oral dosage forms of MMF, running a regular in vitro dissolution test for the fasting state and developing a predictive in vitro dissolution test with sufficient simulation of the GE dynamics and proximal small intestinal pH fluctuations for the fed state would be excellent surrogates for the in vivo BE test. Furthermore, a physiologically based predictive in vitro dissolution test under both fasting and fed conditions would be a new trend for the BE studies of all other HV drug products.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Sitagliptin Phosphate Monohydrate

Sitagliptin is an antihyperglycemic drug used in adults for the treatment of diabetes Type 2. Literature data and in-house experiments were applied in this monograph to assess whether methods based on the Biopharmaceutics Classification System (BCS) could be used to assess the bioequivalence of solid immediate-release (IR) oral dosage forms containing sitagliptin phosphate monohydrate, as an alternative to a pharmacokinetic study in human volunteers. The solubility and permeability characteristics of sitagliptin were reviewed according to the BCS, along with dissolution, therapeutic index, therapeutic applications, pharmacokinetics, pharmacodynamic characteristics, reports of bioequivalence (BE) / bioavailability problems, data on interactions between the drug and excipients and other data germane to the subject.All data reviewed in this monograph unambiguously support classification of sitagliptin as a BCS Class 1 drug. In light of its broad therapeutic index and lack of severe adverse effects, the clinical risks associated with moderately supraoptimal doses were deemed inconsequential, as were the risks associated with moderately suboptimal doses. Taking all evidence into consideration, it was concluded that the BCS-based biowaiver can be implemented for solid IR oral drug products containing sitagliptin phosphate monohydrate, provided (a) the test product is formulated solely with excipients commonly present in solid IR oral drug products approved in ICH or associated countries and used in amounts commonly applied in this type of product, (b) data in support of the BCS-based biowaiver are obtained using the methods recommended by the WHO, FDA, EMA or ICH and (c) the test product and the comparator product (which is the innovator product in this case) meet all in vitro dissolution specifications provided in the WHO, FDA, EMA or ICH guidance.

Preparation of Aspirin Nanosuspension by Antisolvent Precipitation Method

Preparation of Aspirin Nanosuspension by Antisolvent Precipitation Method

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Carbamazepine.

Literature relevant to assessing whether BCS-based biowaivers can be applied to immediate release (IR) solid oral dosage forms containing carbamazepine as the single active pharmaceutical ingredient are reviewed. Carbamazepine, which is used for the prophylactic therapy of epilepsy, is a non-ionizable drug that cannot be considered "highly soluble" across the range of pH values usually encountered in the upper gastrointestinal tract. Furthermore, evidence in the open literature suggests that carbamazepine is a BCS Class 2 drug. Nevertheless, the oral absolute bioavailability of carbamazepine lies between 70 and 78% and both invivo and invitro data support the classification of carbamazepine as a highly permeable drug. Since the therapeutic and toxic plasma level ranges overlap, carbamazepine is considered to have a narrow therapeutic index. For these reasons, a BCS based biowaiver for IR tablets of carbamazepine cannot be recommended. Interestingly, in nine out of ten studies, USP dissolution conditions (900mL water with 1% SLS, paddle, 75rpm) appropriately discriminated among bioinequivalent products and this may be a way forward to predicting whether a given formulation will be bioequivalent to the comparator product.

Biowaiver Monographs for Immediate Release Solid Oral Dosage Forms: Metformin Hydrochloride.

Data are examined regarding possible waiver of invivo bioequivalence testing (i.e. biowaiver) for approval of metformin hydrochloride (metformin) immediate-release solid oral dosage forms. Data include metformin's Biopharmaceutics Classification System (BCS) properties, including potential excipient interactions. Metformin is a prototypical transporter-mediated drug and is highly soluble, but only 50% of an orally administered dose is absorbed from the gut. Therefore, metformin is a BCS Class III substance. A BCS-based approval approach for major changes to marketed products and new generics is admissible if test and reference dosage forms have the identical active pharmaceutical ingredient and if invitro dissolution from both are very rapid (i.e. at least 85% within 15 min at pH 1.2, 4.5, and 6.8). Recent International Council for Harmonisation BCS guidance indicates all excipients for Class III biowaivers are recommended to be qualitatively the same and quantitatively similar (except for preservatives, flavor agents, colorant, or capsule shell or film coating excipients). However, despite metformin being a prototypical transporter-mediated drug, there is no evidence that commonly used excipients impact metformin absorption, such that this restriction on excipients for BCS III drugs merits regulatory relief. Commonly used excipients in usual amounts are not likely to impact metformin absorption.

Quality Testing of Difficult-to-Make Prescription Pharmaceutical Products Marketed in the US

Health care practitioners and patients must have information to support their confidence in the quality of prescription pharmaceuticals. To determine whether there were clear and substantive differences in major quality attributes between difficult-to-make solid oral dosage form pharmaceutical products marketed in the US. This quality improvement study analyzed US Food and Drug Administration-collected samples of 252 drug products marketed in the US and manufactured in the US, Canada, Europe, India, and the rest of Asia. These drug products were immediate-release solid oral dosage forms considered difficult to make on the basis of product quality history. This sampling included 35 innovator and 217 generic drug samples manufactured by 46 different firms containing 17 different active ingredients. Statistical analysis was performed from February to November 2019. All products were tested within their shelf life on the basis of the legally recognized tests of the US Pharmacopeia for the major quality attributes of dosage unit uniformity and dissolution. These tests measure dosage consistency and drug release, respectively. The consistency of either attribute was used to calculate a process performance index to describe the variability in manufacturing. All 252 drug product samples met the US market standards for dosage unit uniformity and dissolution, although the process performance index (Ppk) for dissolution fell below the level of 4-sigma capability (ie, <1 error per 1600) for 11 different manufacturers and for generics in 4 of 5 regions, including the US. As part of a retrospective analysis, manufacturers performing above the median Ppk for either dissolution or dosage unit uniformity submitted fewer product quality defect reports (mean field alert reports of 0.22 and 0.63, respectively) than those falling at or below the median Ppk for these attributes (mean field alert reports of 2.1 and 1.7, respectively). All samples met the US market standards for dosage unit uniformity and dissolution, indicating acceptability for use by patients regardless of manufacturer or region. To our knowledge, this is the largest sampling study of pharmaceutical manufacturers for the US market and these data provide objective insight into the quality of prescription drugs with high manufacturing risks.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Moxifloxacin Hydrochloride

In this monograph, literature data is reviewed to evaluate the feasibility of waiving in vivo bioequivalence testing and instead applying the Biopharmaceutics Classification System (BCS) based methods to the approval of immediate-release solid oral dosage forms containing moxifloxacin hydrochloride as the sole active pharmaceutical ingredient. To facilitate the feasibility decision, solubility and permeability and dissolution characteristics in the context of the BCS, therapeutic index, therapeutic use, pharmacokinetic parameters, bioequivalence/bioavailability issues, drug-excipient interactions and other relevant data were taken into consideration. Moxifloxacin is a BCS class I drug with a wide therapeutic index. Bioequivalence risks arising from the presence of different excipients in the formulation and due to manufacturing variables were deemed to be low. The risks can be further reduced if the choice of excipients is limited to those present in products already approved in International Conference on Harmonisation or associated countries and if the results of in vitro dissolution studies comply with the specifications stipulated in the appropriate biowaiver guidelines. Under these conditions, we conclude that a BCS-based biowaiver can be recommended for moxifloxacin immediate-release solid oral dosage forms.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Ondansetron

Literature data pertaining to the physicochemical, pharmaceutical, and pharmacokinetic properties of ondansetron hydrochloride dihydrate are reviewed to arrive at a decision on whether a marketing authorization of an immediate release (IR) solid oral dosage form can be approved based on a Biopharmaceutics Classification System (BCS)-based biowaiver. Ondansetron, a 5HT3 receptor antagonist, is used at doses ranging from 4 mg to 24 mg in the management of nausea and vomiting associated with chemotherapy, radiotherapy, and postoperative treatment. It is a weak base and thus exhibits pH-dependent solubility. However, it is able to meet the criteria of “high solubility” as well as “high permeability” and can therefore be classified as a BCS class I drug. Furthermore, ondansetron hydrochloride 8 mg IR tablets (Zofran® 8 mg) and multiples thereof (16 mg = Zofran® 8 mg × 2 tablets and 24 mg = Zofran® 8 mg × 3 tablets) meet the criteria of “rapidly dissolving” in dissolution testing. Ondansetron hydrochloride has a wide therapeutic window and is well-tolerated after oral administration. Based on its favorable physicochemical properties, pharmacokinetic data and the minimal risks associated with an incorrect bioequivalence decision, the BCS-based biowaiver procedure can be recommended for ondansetron hydrochloride dihydrate IR tablets.

Biowaiver Monographs for Immediate-Release Solid Oral Dosage Forms: Folic Acid

This work presents a review of literature and experimental data relevant to the possibility of waiving pharmacokinetic bioequivalence studies in human volunteers for approval of immediate-release solid oral pharmaceutical forms containing folic acid as the single active pharmaceutical ingredient. For dosage forms containing 5 mg folic acid, the highest dose strength on the World Health Organization Essential Medicines List, the dose/solubility ratio calculated from solubility studies was higher than 250 mL, corresponding to a classification as “not highly soluble.” Small, physiological doses of folic acid (≤320 μg) seem to be absorbed completely via active transport, but permeability data for higher doses of 1-5 mg are inconclusive. Following a conservative approach, folic acid is classified as a Biopharmaceutics Classification System class IV compound until more reliable data become available. Commensurate with its solubility characteristics, the results of dissolution studies indicated that none of the folic acid products evaluated showed rapid dissolution in media at pH 1.2 or 4.5. Therefore, according to the current criteria of the Biopharmaceutics Classification System, the biowaiver approval procedure cannot be recommended for immediate-release solid oral dosage forms containing folic acid.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Amoxicillin Trihydrate

Literature and experimental data relevant to waiver of in vivo bioequivalence (BE) testing for the approval of immediate-release solid oral dosage forms containing amoxicillin trihydrate are reviewed. Solubility and permeability characteristics according to the Biopharmaceutics Classification System (BCS), therapeutic uses, therapeutic index, excipient interactions, as well as dissolution and BE and bioavailability studies were taken into consideration. Solubility and permeability studies indicate that amoxicillin doses up to 875 mg belong to BCS class I, whereas 1000 mg belongs to BCS class II and doses of more than 1000 mg belong to BCS class IV. Considering all aspects, the biowaiver procedure can be recommended for solid oral products of amoxicillin trihydrate immediate-release preparations containing amoxicillin as the single active pharmaceutical ingredient at dose strengths of 875 mg or less, provided (a) only the excipients listed in this monograph are used, and only in their usual amounts, (b) the biowaiver study is performed according to the World Health Organization–, U.S. Food and Drug Administration–, or European Medicines Agency–recommended method using the innovator as the comparator, and (c) results comply with criteria for “very rapidly dissolving” or “similarly rapidly dissolving.” Products containing other excipients and those containing more than 875 mg amoxicillin per unit should be subjected to an in vivo BE study.

Biowaiver Monographs for Immediate-Release Solid Oral Dosage Forms: Enalapril

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence testing for the marketing authorization of immediate-release, solid oral dosage forms containing enalapril maleate are reviewed. Enalapril, a prodrug, is hydrolyzed by carboxylesterases to the active angiotensin-converting enzyme inhibitor enalaprilat. Enalapril as the maleate salt is shown to be highly soluble, but only 60%-70% of an orally administered dose of enalapril is absorbed from the gastrointestinal tract into the enterocytes. Consequently, enalapril maleate is a Biopharmaceutics Classification System class III substance. Because in situ conversion of the maleate salt to the sodium salt is sometimes used in production of the finished drug product, not every enalapril maleate–labeled finished product actually contains the maleate salt. Enalapril is not considered to have a narrow therapeutic index. With this background, a biowaiver-based approval procedure for new generic products or after major revisions to existing products is deemed acceptable, provided the in vitro dissolution of both test and reference preparation is very rapid (at least 85% within 15 min at pH 1.2, 4.5, and 6.8). Additionally, the test and reference product must contain the identical active drug ingredient.

Biowaiver Monographs for Immediate-Release Solid Oral Dosage Forms: Nifedipine

Literature data relevant to the biopharmaceutical properties of the active pharmaceutical ingredient (API) nifedipine are reviewed to evaluate whether a waiver of in vivo bioequivalence (BE) testing of immediate-release (IR) dosage forms formulated as tablets and soft gelatin capsules is warranted. Nifedipine's solubility and permeability, its therapeutic use and index, pharmacokinetics, food drug interactions, and any reported BE/bioavailability problems were all taken into consideration. Solubility and BA data indicate conclusively that nifedipine is a class II substance of biopharmaceutics classification system (BCS) and that the formulation of drug product plays a key role on the dissolution characteristics of the API. Therefore, a BCS biowaiver-based approval of nifedipine containing IR oral dosage forms cannot be recommended for reformulated/new multisource drug products or for major scale-up and postapproval changes to the existing drug products.

Biowaiver Monographs for Immediate Release Solid Oral Dosage Forms: Levetiracetam

Literature and experimental data relevant for the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing levetiracetam are reviewed. Data on solubility and permeability suggest that levetiracetam belongs to class I of the biopharmaceutical classification system (BCS). Levetiracetam's therapeutic use, its wide therapeutic index, and its favorable pharmacokinetic properties make levetiracetam a valid candidate for the BCS-based biowaiver approach. Further, no BE studies with levetiracetam IR formulations in which the test formulation failed to show BE with the comparator have been reported in the open literature. On the basis of the overall evidence, it appears unlikely that a BCS-based biowaiver approach for levetiracetam IR solid oral dosage forms formulated with established excipients would expose patients to undue risks. Thus, the BCS-based biowaiver approach procedure is recommended for IR solid oral dosage form containing levetiracetam, provided the excipients in the formulation are also present in products that have been approved in countries belonging to or associated with the International Committee on Harmonization and are used in their usual quantities, and provided the dissolution profiles of the test and reference product comply with the current requirements for BCS-based biowaivers.

A Sensitive Medium-Throughput Method to Predict Intestinal Absorption in Humans Using Rat Intestinal Tissue Segments

A range of in vitro, ex vivo, and in vivo approaches are currently used for drug development. Highly predictive human intestinal absorption models remain lagging behind the times because of numerous variables concerning permeability through gastrointestinal tract in humans. However, there is a clear need for a drug permeability model early in the drug development process that can balance the requirements for high throughput and effective predictive potential. The present study developed a medium throughput screening Snapwell (MTS-Snapwell) ex vivo model to provide an alternative method to classify drug permeability. Rat small intestine tissue segments were mounted in commercial Snapwell™ inserts. Unidirectional drug transport (A-B) was measured by collecting samples at different time points. Viability of intestinal tissue segments was measured by examining transepithelial electric resistance (TEER) and phenol red and caffeine transport. As a result, the apparent permeability (Papp; ×10(-6) cm/s) was determined for atenolol (10.7 ± 1.2), caffeine (17.6 ± 3.1), cimetidine (6.9 ± 0.1), metoprolol (12.6 ± 0.7), theophylline (15.3 ± 1.6) and, ranitidine (3.8 ± 0.4). All drugs were classified in high/low permeability according to Biopharmaceutics Classification System showing high correlation with human data (r = 0.89). These findings showed a high correlation with human data (r = 0.89), suggesting that this model has potential predictive capacity for paracellular and transcellular passively absorbed molecules.

A Strategy for Quality Control Dissolution Method Development for Immediate-Release Solid Oral Dosage Forms

A Strategy for Quality Control Dissolution Method Development for Immediate-Release Solid Oral Dosage Forms