Imaging Of Extrasolar Planets Research Articles

Optique adaptative : correction des effets de la turbulence atmosphérique sur les images astronomiques

Today, adaptive optics (AO) is installed on all very large astronomical telescopes. It allows to overcome the limitation in angular resolution imposed on large ground-based telescopes by the atmospheric turbulence perturbations. This review paper presents the state of the art of the field for astronomical applications. It gives the principles of AO and describes its main components which are the deformable mirrors, the wavefront sensors and the control algorithms. The paper also presents the main recent achievements and ongoing projects. First, for the direct imaging of extra-solar planets by extreme AO and coronography, taking as example the SPHERE instrument. Then to solve the problem of the very limited sky coverage by using laser guide star and to extend the AO correction beyond the isoplanatic patch. Thus, the various laser-assisted tomographic AO concepts are presented with examples of each realization as for the laser tomography AO, the multi-conjugate AO and the multi-object AO. Finally, the challenges of the new generation of giant telescopes are discussed at the end of the paper with a particular focus on the European Extremely Large Telescope (ELT) project.

Laboratory demonstration of the birefrigent point-diffraction interferometer wavefront sensor

The direct imaging of extrasolar planets requires extreme adaptive optics (ExAO) in the near-infrared wavelengths. The ExAO needs a high-efficient wavefront sensor (WFS) to measure the phase aberration accurately with a small number of photons. In addition, the WFS in the ExAO is required to run at high sampling rates of 1 − 7 kHz. To meet these requirements, we developed the birefringent point-diffraction interferometer (b-PDI) presented in our earlier paper. We tested the b-PDI in the laboratory with a polychromatic light source with wavelengths of 800 ± 100 nm. The b-PDI showed a relatively high efficiency, comparable to that of a fixed pyramid WFS. The b-PDI has a low calculation cost and a small readout region, which are suitable for high-speed sampling at 6.5 kHz.

Laboratory Demonstration of Spatial Linear Dark Field Control For Imaging Extrasolar Planets in Reflected Light

Imaging planets in reflected light, a key focus of future NASA missions and extremely large telescopes, requires advanced wavefront control to maintain a deep, temporally correlated null of stellar halo—i.e., a dark hole (DH)—at just several diffraction beam widths. Using the Ames Coronagraph Experiment testbed, we present the first laboratory tests of Spatial Linear Dark Field Control (LDFC) approaching raw contrasts (∼5 × 10−7) and separations (1.5–5.2λ/D) needed to image Jovian planets around Sun-like stars with space-borne coronagraphs like WFIRST-CGI and image exo-Earths around low-mass stars with future ground-based 30 m class telescopes. In four separate experiments and for a range of different perturbations, LDFC largely restores (to within a factor of 1.2–1.7) and maintains a DH whose contrast is degraded by phase errors by an order of magnitude. Our implementation of classical speckle nulling requires a factor of 2–5 more iterations and 20–50 deformable mirror (DM) commands to reach contrasts obtained by spatial LDFC. Our results provide a promising path forward to maintaining DHs without relying on DM probing and in the low-flux regime, which may improve the duty cycle of high-contrast imaging instruments, increase the temporal correlation of speckles, and thus enhance our ability to image true solar system analogues in the next two decades.

Imaging and Characterization of Extrasolar Planets with the Next Generation of Space Telescopes

The study and characterization of the exoplanets’ atmospheres and composition is in its infancy. The large facilities that will make feasible to image an exo-Earth are currently under study. This contribution to the special issue on “detection and characterization of extrasolar planets” is a summary on the current status of the design studies to build large space-based facilities working in the 100–3000 nm range for this purpose. The three basic designs: Fresnel imagers, starshades, and coronagraphs on large space telescopes are described. An outline of the pros and cons for each design is provided. The relevance of transmission spectroscopy to characterize exoplanets atmospheres is pointed out.

Exocartographer: A Bayesian Framework for Mapping Exoplanets in Reflected Light

Abstract Future space telescopes will directly image extrasolar planets at visible wavelengths. Time-resolved reflected light from an exoplanet encodes information about atmospheric and surface inhomogeneities. Previous research has shown that the light curve of an exoplanet can be inverted to obtain a low-resolution map of the planet, as well as constraints on its spin orientation. Estimating the uncertainty on 2D albedo maps has so far remained elusive. Here, we present exocartographer, a flexible open-source Bayesian framework for solving the exocartography inverse problem. The map is parameterized with equal-area Hierarchical, Equal Area, and isoLatitude Pixelation (HEALPix) pixels. For a fiducial map resolution of 192 pixels, a four-parameter Gaussian process describing the spatial scale of albedo variations, and two unknown planetary spin parameters, exocartographer explores a 198-dimensional parameter space. To test the code, we produce a light curve for a cloudless Earth in a face-on orbit with a 90° obliquity. We produce synthetic white-light observations of the planet: five epochs of observations throughout the planet’s orbit, each consisting of 24 hourly observations with a photometric uncertainty of 1% (120 data points). We retrieve an albedo map and—for the first time—its uncertainties, along with spin constraints. The albedo map is recognizably of Earth, with a typical 90% uncertainty of 0.14. The retrieved characteristic length scale is ∼9800 km. The obliquity is recovered to be >87.°9 at the 90% credible level. Despite the uncertainty in the retrieved albedo map, we robustly identify a high-albedo region (the Sahara desert) and a large low-albedo region (the Pacific Ocean).

Speckle suppression and companion detection using coherent differential imaging

Residual speckles due to aberrations arising from optical errors after the split between the wavefront sensor and the science camera path are the most significant barriers to imaging extrasolar planets. While speckles can be suppressed using the science camera in conjunction with the deformable mirror, this requires knowledge of the phase of the electric field in the focal plane. We describe a method which combines a coronagraph with a simple phase-shifting interferometer to measure and correct speckles in the full focal plane. We demonstrate its initial use on the Stellar Double Coronagraph at the Palomar Observatory. We also describe how the same hardware can be used to distinguish speckles from true companions by measuring the coherence of the optical field in the focal plane. We present results observing the brown dwarf HD 49197b with this technique, demonstrating the ability to detect the presence of a companion even when it is buried in the speckle noise, without the use of any standard "calibration" techniques. We believe this is the first detection of a substellar companion using the coherence properties of light.

THE CENTER OF LIGHT: SPECTROASTROMETRIC DETECTION OF EXOMOONS

Direct imaging of extrasolar planets with future space-based coronagraphic telescopes may provide a means of detecting companion moons at wavelengths where the moon outshines the planet. We propose a detection strategy based on the positional variation of the center of light with wavelength, "spectroastrometry." This new application of this technique could be used to detect an exomoon, to determine the exomoon's orbit and the mass of the host exoplanet, and to disentangle of the spectra of the planet and moon. We consider two model systems, for which we discuss the requirements for detection of exomoons around nearby stars. We simulate the characterization of an Earth-Moon analog system with spectroastrometry, showing that the orbit, the planet mass, and the spectra of both bodies can be recovered. To enable the detection and characterization of exomoons we recommend that coronagraphic telescopes should extend in wavelength coverage to 3 micron, and should be designed with spectroastrometric requirements in mind.

Performance of the VLT Planet Finder SPHERE

We present the performance of the Integral Field Spectrograph (IFS) of SPHERE, the high-contrast imager for the ESO VLT telescope designed to perform imaging and spectroscopy of extrasolar planets, obtained from tests performed at the Institute de Plan\'etologie et d'Astrophysique de Grenoble facility during the integration phase of the instrument.} {The tests were performed using the instrument software purposely prepared for SPHERE. The output data were reduced applying the SPHERE data reduction and handling software, adding an improved spectral deconvolution procedure. To this aim, we prepared an alternative procedure for the spectral subtraction exploiting the principal components analysis algorithm. Moreover, a simulated angular differential imaging procedure was also implemented to estimate how the instrument performed once this procedure was applied at telescope. The capability of the IFS to faithfully retrieve the spectra of the detected faint companions was also considered.} {We found that the application of the updated version of the spectral deconvolution procedure alone, when the algorithm throughput is properly taken into account, gives us a $5\sigma$ limiting contrast of the order of 5$\times$$10^{-6}$ or slightly better. The further application of the angular differential imaging procedure on these data should allow us to improve the contrast by one order of magnitude down to around 7$\times$$10^{-7}$ at a separation of 0.3 arcsec. The application of a principal components analysis procedure that simultaneously uses spectral and angular data gives comparable results. Finally, we found that the reproducibility of the spectra of the detected faint companions is greatly improved when angular differential imaging is applied in addition to the spectral deconvolution.

Hesperides: Solar/nuclear missions to the Sun׳s inner gravity focus

The Sun׳s gravity focus at >550AU is of interest to astrophysicists including SETI scientists, researchers seeking to image extra-solar planets and others. One method for an extra-solar probe to reach the Sun׳s inner gravity focus within a human working lifetime (less than 50 years) is to combine solar and nuclear propulsion techniques. Here, we present a non-optimized probe concept including state-of-the-art solar-sail, radioisotope-electric propulsion and giant-planet gravity assists. Application of radioisotope propulsion allows some cross range capability during and after the powered and cruise phases of the flight to >600AU. Such a capability is likely necessary to fully utilize the solar gravitational lens effect for SETI and astrophysical observations.

Searching for Faint Exozodiacal Disks: Keck Results and LBTI Status

AbstractThe possible presence of dust in the habitable zone around nearby main-sequence stars is considered as a major hurdle toward the direct imaging of Earth-like extrasolar planets with future dedicated space-based telescopes (e.g., Roberge et al. 2012). In this context, NASA has funded two ground-based mid-infrared nulling interferometers to combine the large apertures available at the Keck Observatory and the Large Binocular Telescope (LBT). In this poster, we present the preliminary results of the extended survey carried out with the Keck Interferometer Nuller (KIN) between 2008 and 2011 and describe the forthcoming LBTI survey.

Direct imaging of extra-solar planets in star forming regions

Context. Most exoplanet imagers consist of ground-based adaptive optics coronagraphic cameras which are currently limited in contrast, sensitivity and astrometric precision, but advantageously observe in the near-infrared window (1–5 μm). Because of these practical limitations, our current observational aim at detecting and characterizing planets puts heavy constraints on target selection, observing strategies, data reduction, and follow-up. Most surveys so far have thus targeted young systems (1–100 Myr) to catch the putative remnant thermal radiation of giant planets, which peaks in the near-infrared. They also favor systems in the solar neighborhood (d < 80 pc), which eases angular resolution requirements but also ensures a good knowledge of the distance and proper motion, which are critical to secure the planet status, and enable subsequent characterization.

Boundary diffraction wave integrals for diffraction modeling of external occulters

An occulter is a large diffracting screen which may be flown in conjunction with a telescope to image extrasolar planets. The edge is shaped to minimize the diffracted light in a region beyond the occulter, and a telescope may be placed in this dark shadow to view an extrasolar system with the starlight removed. Errors in position, orientation, and shape of the occulter will diffract additional light into this region, and a challenge of modeling an occulter system is to accurately and quickly model these effects. We present a fast method for the calculation of electric fields following an occulter, based on the concept of the boundary diffraction wave: the 2D structure of the occulter is reduced to a 1D edge integral which directly incorporates the occulter shape, and which can be easily adjusted to include changes in occulter position and shape, as well as the effects of sources-such as exoplanets-which arrive off-axis to the occulter. The structure of a typical implementation of the algorithm is included.

Models of very-low-mass stars, brown dwarfs and exoplanets

Within the next few years, GAIA and several instruments aiming to image extrasolar planets will be ready. In parallel, low-mass planets are being sought around red dwarfs, which offer more favourable conditions, for both radial velocity detection and transit studies, than solar-type stars. In this paper, the authors of a model atmosphere code that has allowed the detection of water vapour in the atmosphere of hot Jupiters review recent advances in modelling the stellar to substellar transition. The revised solar oxygen abundances and cloud model allow the photometric and spectroscopic properties of this transition to be reproduced for the first time. Also presented are highlight results of a model atmosphere grid for stars, brown dwarfs and extrasolar planets.

Atmospheres From Very Low-Mass Stars to Extrasolar Planets

Within the next few years, several instruments aiming at imaging extrasolar planets will see first light. In parallel, low mass planets are being searched around red dwarfs which offer more favorable conditions, both for radial velocity detection and transit studies, than solar-type stars. We review recent advancements in modeling the stellar to substellar transition. The revised solar oxygen abundances and cloud models allow to reproduce the photometric and spectroscopic properties of this transition to a degree never achieved before, but problems remain in the important M-L transition characteristic of the effective temperature range of characterizable exoplanets.

Optimization of an Occulter-Based Extrasolar-Planet-Imaging Mission

Anovel approach to extrasolar-planet imaging uses a pair of satellites: a telescope and an occulter, where the latter is placed in the line of sight between the telescope and the star system to be imaged in order to enhance the telescope’s imaging capability. The optimal configuration of this satellite formation around sun–Earth L2 halo orbits is studied. Trajectory optimization of the occultermotion between imaging sessions of different stars is performed using a range of different criteria and methods. Thus, the global optimization problem is transformed into a time-dependent traveling salesman problem. The time-dependent traveling salesman problem is augmentedwith various constraints that arrive from the mission, and this problem is solved by employing simulated annealing and branching algorithms. For a concrete understanding of the feasibility of themission, the performance of an example spacecraft, the Small Missions for Advanced Research in Technology (SMART-1), is analyzed.

Simulation of planet detection with the SPHERE integral field spectrograph

Aims. We present simulations of the perfomances of the future SPHERE IFS instrument designed for imaging extrasolar planets in the near infrared (Y, J, and H bands). Methods. We used the IDL package code for adaptive optics simulation (CAOS) to prepare a series of input point spread functions (PSF). These feed an IDL tool (CSP) that we designed to simulate the datacube resulting from the SPHERE IFS. We performed simulations under different conditions to evaluate the contrast that IFS will be able to reach and to verify the impact of physical propagation within the limits of the near field of the aperture approximation (i.e. Fresnel propagation). We then performed a series of simulations containing planet images to test the capability of our instrument to correctly classify the found objects. To this purpose we developed a separated IDL tool. Results. We found that using the SPHERE IFS instrument and appropriate analysis techniques, such as multiple spectral differential imaging (MDI), spectral deconvolution (SD), and angular differential imaging (ADI), we should be able to image companion objects down to a luminosity contrast of ? 10-7 with respect to the central star in favorable cases. Spectral deconvolution resulted in the most effective method for reducing the speckle noise. We were then able to find most of the simulated planets (more than 90% with the Y-J-mode and more than the 95% with the Y-H-mode) for contrasts down to 3 \times 10-7 and separations between 0.3 and 1.0 arcsec. The spectral classification is accurate but seems to be more precise for late T-type spectra than for earlier spectral types. A possible degeneracy between early L-type companion objects and field objects (flat spectra) is highlighted. The spectral classification seems to work better using the Y-H-mode than with the Y-J-mode.

Imaging extra-solar planets with adaptive optics and a MEMS mirror

Imaging extra-solar planets with adaptive optics and a MEMS mirror

Imaging extrasolar planets with the European Extremely Large Telescope

The European Extremely Large Telescope (E-ELT) is the most ambitious of the ELTs being planned. With a diameter of 42 m and being fully adaptive from the start, the E-ELT will be more than one hundred times more sensitive than the present-day largest optical telescopes. Discovering and characterising planets around other stars will be one of the most important aspects of the E-ELT science programme. We model an extreme adaptive optics instrument on the E-ELT. The resulting contrast curves translate to the detectability of exoplanets.

Direct imaging of massive extrasolar planets

AbstractThe direct detection of an extrasolar planet can provide accurate measurements of its orbit, mass and composition, greatly improving our understanding of how planets form and evolve. Recent advances in ground-based and space-based imaging techniques have now produced the first direct images of extrasolar planets. Typically these are many-Jupiter-mass planets on wide orbits. Direct imaging therefore probes the outer architecture of planetary systems and it is highly complementary to other techniques sensitive to inner architectures. This brief review summarizes the properties of the currently imaged exoplanets, provides an update on the orbit of Fomalhaut b, and highlights the emerging phenomenon of circumplanetary disks.

The relevance of prior inclination determination for direct imaging of Earth-like planets

Direct imaging and characterization of extrasolar Earth-like planets is strongly impacted by the orbital inclination of the planet to be studied, as a combination of pure geometrical effects and the impact of exozodiacal dust. Here, we perform simulations to quantify the impact of a priori knowledge of inclination for the efficiency of a typical coronagraphic or occulter-based mission. The relative impact and complementarity with prior knowledge of exozodiacal brightness down to achievable levels is examined and discussed. It is found that inclination has an even greater impact than the exozodiacal brightness, though the two have excellent complementarity. We also discuss different methods for inclination determination, and their respective applicability to the context of precursor science to an imaging mission. It is found that if technologically achievable, a combined effort to determine inclinations and exozodiacal brightnesses with ground-based facilities would substantially increase the efficiency of a space-based dedicated mission to image and characterize Earth-like planets.