Illumination Engineering Research Articles

IOT Based Green House Monitoring and Controlling with Arduino

Greenhouses offer a controlled environment for growing plants. For a green house system to function effectively, it needs to consistently oversee and control various environmental elements such as hotness, dampness, soil moisture, light strength, and soil p H. The main objective of the project is to create a cost-efficient design to promote optimal plant growth and yield. Arduino system that allows for constant updating and adjustment of environmental parameter values. The DHT 11,s and acidity, LDR plus dryness are the important sensors in the project, measuring moisture, temperature, water purpose, light strength, and earth wetness. Android smart phones receive environmental data both offline and online. The present situation of the surrounding circumstances is displayed in an SMS sent via a GSM modem. The user gets a text when this sensor value goes above a specific threshold. Farmers can observe and control their green houses from anywhere. SMS commands can be used to change environmental factors like the fluid pump, motor breathe, refrigeration fan, emission fan, and manufactured illumination fluids pump, engine breathe, cooling fan, exhaust fan, and false lighting. To prevent SMS charges, data parameters are sent to mobile phones using Ethernet. Using Ethernet, all environmental data is sent to the machine ad kept on the data file in this way, the Android app allows the user to monitor and manage settings.

Validation of Beam Angle Switching Method Using a LED Lumen Maintenance Testing Device

In today’s world, LED predominantly ousted all forms of light sources because of its long lifetime, reliability, very low power consumption, and excellent controllability. That is why, it became a necessity to find proper methods to examine all its characteristics. As directed in several standards, an accelerated life test (ALT) is a good method to predict LED’s lumen depreciation. In correspondence with these standards, to find that persistency of light output from a medium power LED, a prototype is developed, which has predefined data storage capacity with remote monitoring capability, at the Electrical Engineering Department’s Illumination Engineering Laboratory at Jadavpur University to measure the lumen maintenance factor, junction temperature, and ambient humidity in the defined test chamber. Besides, to test the device a particular case study is done to validate beam angle switching, a method for LED dimming. The case study reveals that the dimming method has no effect on the LED’s junction temperature or light output.

Multi-scale tissue fluorescence mapping with fiber optic ultraviolet excitation and generative modeling

Cellular imaging of thick samples requires physical sectioning or laser scanning microscopy, which can be restrictive, involved, and generally incompatible with high-throughput requirements. We developed fiber optic microscopy with ultraviolet (UV) surface excitation (FUSE), a portable and quantitative fluorescence imaging platform for thick tissue that enabled quick sub-cellular imaging without thin sections. We substantially advanced prior UV excitation approaches with illumination engineering and computational methods. Optical fibers delivered <300nm light with directional control, enabling unprecedented 50× widefield imaging on thick tissue with sub-nuclear clarity, and 3D topography of surface microstructure. Probabilistic modeling of high-magnification images using our normalizing flow architecture FUSE-Flow (made freely available as open-source software) enhanced low-magnification imaging with measurable localized uncertainty via variational inference. Comprehensive validation comprised multi-scale fluorescence histology compared with standard H&E histology, and quantitative analyses of senescence, antibiotic toxicity, and nuclear DNA content in tissue models via efficient sampling of thick slices from entire murine organs up to 0.4×8×12mm and 1.3 million cells per surface. This technology addresses long-standing laboratory gaps in high-throughput studies for rapid cellular insights.

Light Engineering and Silicon Diffractive Optics Assisted Nonparaxial Terahertz Imaging

AbstractThe art of light engineering unveils a world of possibilities through the meticulous manipulation of photonic properties such as intensity, phase, and polarization. Precision control over these properties finds application in a variety of fields spanning communications, light–matter interactions, laser direct writing, and imaging. Terahertz (THz) range, nestled between microwaves and infrared light, stands out for its remarkable ability to propagate with minimal losses in numerous dielectric materials and compounds, making THz imaging a powerful tool for noninvasive control and inspection. In this study, a rational framework for the design and optimal assembly of nonparaxial THz imaging systems is established. The research is centered on lensless photonic systems composed solely of high‐resistivity silicon‐based nonparaxial elements such as the Fresnel zone plate, the Fibonacci lens, the Bessel axicon, and the Airy zone plate, all fabricated using laser ablation technology. Through a comprehensive examination through illumination engineering and scattered light collection from raster‐scanned samples in a single‐pixel detector scheme, the imaging systems are evaluated via diverse metrics including contrast, resolution, depth of field, and focus. These findings chart an exciting course toward the development of compact and user‐friendly THz imaging systems where sensors and optical elements seamlessly integrate into a single chip.

Sculpting optical fields into caustic patterns based on freeform optics

Manipulating flux transportation of optical fields holds great promise across various kinds of applications, encompassing laser micro-processing, optical trapping, microscopic imaging, and illumination engineering. In recent decades, freeform optics, lauded for its capacity to efficiently control the wavefronts of optical beams with high design freedom, has garnered significant attention as a potent tool for shaping light. Nevertheless, the predominant focus in current research has centered on the development of freeform optical elements (FOEs) tailored to project a designated two-dimensional flux density onto a specific target plane. This limitation confines the potential applications of freeform light shaping optics to a rather restricted domain. Moreover, the constraints imposed by geometric optics pose a further limitation on FOEs, particularly in their ability to sculpt coherent light, such as laser beams, as these are particularly susceptible to diffraction effects. Within the context of this study, we propose a design paradigm that harnesses freeform optics to craft light trajectories in three dimensions. This approach inherently gives rise to caustics, which are singularities within the realm of flux transfer in geometric optics. Crucially, our proposed method yields the capability to generate sharply defined light patterns, empirically giving better results for mitigating diffraction effects in contrast to previous design methodologies, which is observed by experiments. This design philosophy empowers FOEs to undertake new roles and functionalities by shaping caustics. To substantiate the potential of our proposal, we present a diverse array of design examples. These encompass scenarios ranging from the illumination of parallel planes to the sculpting of light propagation into three-dimensional curves, as well as the reshaping of beam intensities with an extended depth of field. We expect that the proposed work can broaden the scope of freeform optics, particularly within non-imaging applications, and propel freeform optical elements into hitherto unexplored territories.

Gradient descent-based freeform optics design for illumination using algorithmic differentiable non-sequential ray tracing

Algorithmic differentiable ray tracing is a new paradigm that allows one to solve the forward problem of how light propagates through an optical system while obtaining gradients of the simulation results with respect to parameters specifying the optical system. Specifically, the use of algorithmically differentiable non-sequential ray tracing provides an opportunity in the field of illumination engineering to design complex optical system. We demonstrate its potential by designing freeform lenses that project a prescribed irradiance distribution onto a plane. The challenge consists in finding a suitable surface geometry of the lens so that the light emitted by a light source is redistributed into a desired irradiance distribution. We discuss the crucial steps allowing the non-sequential ray tracer to be differentiable. The obtained gradients are used to optimize the geometry of the freeform, and we investigate the effectiveness of adding a multi-layer perceptron neural network to the optimization that outputs parameters defining the freeform lens. Lenses are designed for various sources such as collimated beams or point sources, and finally, a grid of point sources approximating an extended source. The obtained lens designs are finally validated using the commercial non-sequential ray tracer LightTools.

Graphene/Cholesteric Liquid-Crystal-Based Electro-Driven Thermochromic Light Modulators toward Wide-Gamut Dynamic Light Color-Tuning-Related Applications.

Light filters are ubiquitous in projection and display techniques, illumination engineering, image sensing, photography, etc., while those enabling wide-gamut dynamic light color tuning are still lacking. Herein, by combining the electro-heating capability of graphene and unique optical properties (thermochromism and circular dichroism) of small-molecule-weight cholesteric liquid crystal (ChLC), a brand-new thermochromic light modulator is constructed as actively tunable color filter. Transparent graphene/glass hybrid with reasonably high conductivity serves both as a high-performance heater for actuating the thermochromism of temperature-responsive ChLC and as neutral light attenuator for brightness control. Thanks to the temperature- and polarization-dependent spectral properties of the ChLC, widely tunable hue and saturation properties of transmission light color are achieved, respectively. Several intriguing applications, e.g., color-variable smart windows for backlight color tuning and color-variable filters for photography, are also demonstrated. This work hereby provides new paradigms for promoting the applications of graphene/ChLC-based light modulators in next-generation light-management-related scenarios.

Optical Model of Thermal Radiation Loading System for Turbine Vane Leading Edge

With the increase of combustion temperatures, the thermal radiation effect for hot components in the new generation of aero-engines has become a key factor in the combustion process, cooling structure design, and thermal protection. A radiation loading system can be used as an external heat source to simulate the real thermal environment of hot components in aero-engines. Total receiving power, as well as 3-D heat flux distribution, should better coincide with real conditions. With the aid of freeform optics and the feedback optimization method, the current study develops a concentrating-type radiation heating system fit for the leading-edge surface of a C3X turbine vane. A xenon lamp combined with a freeform reflector was optimized for controllable heat flux. A design method in the area of illumination engineering was innovatively extended for the current model. Considering the effect of polar angular radiative flux distribution of a xenon lamp, a Monte Carlo ray tracing (MCRT) method was adopted to evaluate the optical performance. Feedback modifications based on Bayesian theory were adopted to obtain the optimal shape of the FFS for target heat flux. The current study seeks a feasible way to generate 3-D heat flux distribution for complex curved surfaces, such as turbine vane surfaces, and helps to simulate the real thermal environment of hot components in aero-engines.

Geometrical limits for UV-C inactivation of pathogens

The inactivation of pathogens through the irradiation of ultraviolet light depends on how light propagates within the medium where the microorganism is immersed. A simple geometrical optics analysis, and a fluence evaluation reveal some reservoirs where the pathogen may hide and be weakly exposed to the incoming radiation. This geometrical hide-outs also generate a tail in the plot of the total inactivation plot vs. the incoming fluence. We have analyzed these facts using geometrical optics principles and illumination engineering computational packages. The results obtained from previous biomedical measurements involving SARS-CoV-2 have been used to evaluate the inactivation degree for an spherical geometry applicable to airborne pathogens, and for an spherical cap geometry similar to that used in biomedical experiments. The case presented here can be seen as the worst-case scenario applicable under collimated illumination.

LED Reliability Assessment Using a Novel Monte Carlo-Based Algorithm

Application of Monte Carlo (MC) simulations in the statistical analysis of LED lumen maintenance is presented in this paper. Lumen maintenance data is acquired using experimental tests accomplished in the electro-optics laboratory of the Mazinoor lighting industry, which is an accredited laboratory by Iranian National Standards organization. The sampling rate and the duration of the experiments are consistent with LM-80-15 standard introduced by the Illumination Engineering Society of North America. In some cases, due to the existence of nonlinear dynamics in real trends of light flux, particularly in the first 1,000 hours, features are not completely captured using traditional reliability assessment techniques such as TM-21. In this study, a two-phase model is applied to cover features in lumen maintenance data. Furthermore, to estimate the parameters of the dedicated model in mild and severe operating conditions, a nonlinear Kalman filter-based method known as the iterated extended Kalman filter (IEKF) is used. A set of MC simulations are run to construct the probability density functions (PDFs) for the estimated parameters. Each simulation uses different values of the parameters chosen from the corresponding distribution. Finally, lifetime PDFs are constructed to extract reliability indices. All of the simulations are conducted in MATLAB and the results are compared with the conventional and well-known TM-21 approach.

“Home Is The Theater Of Life”: Scenographic Poetics And American Living Room Ambience, 1900–1925

Proceeding from the notion of scenography as atmosphere or ambience, this article explores scenographic design elements aimed at a range of American middle-class living rooms during the early-twentieth century when these newly configured domestic interior spaces replaced Victorian parlors, libraries, and drawing rooms as gathering places for both private family activities and those social occasions when friends and guests were invited into the home. Looking to the period’s theatre with its realistic, natural portrayal of family life as unfolding in the living room, spokespersons for the emerging professions of interior design and illumination engineering spearheaded a call for replicating the aesthetics of theatre atmosphere in living rooms through the manipulation of artificial light at a time when rapid innovations in electric lighting were beginning to transform public and private spaces. Through the utilization of the new “color science” housewives could create the proper atmosphere for any occasion through an inviting scenographics of illuminated fixtures, decorative furnishings, and wall treatments that radiated a pleasing harmony of refinement and relaxation.

Case Study on the Impact of Artificial Light on Lighting Performance Quality for Architecture Studios

A well-lit learning space is crucial to ensure the comfort of its occupants, especially for an architecture student who spends long hours in a studio to design, sketch, draw and build prototypes. This paper presents the results from a study conducted on the illuminance level of the architecture studios in the city campus of Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia that were once laboratories. Measurements had been done using the Lux meter. Illuminance contours were generated using SigmaPlot and Dialux software for all the five rooms and compared with the requirements stipulated in the Malaysian Standard, Australia/New Zealand Standard and Illumination Engineering Society of North America (IESNA) standard for a room with similar function. A survey was also conducted among undergraduate architecture students who were using the studios daily to gauge their perception on the lighting condition and comfort level. The outcome of this study can be considered for future architecture studio lighting design to improve the students’ learning experience.

Bulk-Effect-Free Method for Binding Kinetic Measurements Enabling Small-Molecule Affinity Characterization.

Optical technologies for label-free detection are an attractive solution for monitoring molecular binding kinetics; however, these techniques measure the changes in the refractive index, making it difficult to distinguish surface binding from a change in the refractive index of the analyte solution in the proximity of the sensor surface. The solution refractive index changes, due to solvents, temperature changes, or pH variations, can create an unwanted background signal known as the bulk effect. Technologies such as biolayer interferometry and surface plasmon resonance offer no bulk-effect compensation, or they alternatively offer a reference channel to correct in postprocessing. Here, we present a virtually bulk-effect-free method, without a reference channel or any computational correction, for measuring kinetic binding using the interferometric reflectance imaging sensor (IRIS), an optical label-free biomolecular interaction analysis tool. Dynamic spectral illumination engineering, through tailored LED contributions, is combined with the IRIS technology to minimize the bulk effect, with the potential to enable kinetic measurements of a broader range of analytes. We demonstrate that the deviation in the reflectivity signal is reduced to ∼8 × 10–6 for a solution change from phosphate-buffered saline (PBS) (n = 1.335) to 1% dimethyl sulfoxide (DMSO) in PBS (n = 1.336). As a proof of concept, we applied the method to a biotin–streptavidin interaction, where biotin (MW = 244.3 Da) was dissolved at a final concentration of 1 μM in a 1% solution of DMSO in PBS and flowed over immobilized streptavidin. Clear binding results were obtained without a reference channel or any computational correction.

A Freeform Lens System Design and Simulation in the Polar Coordinate

In the field of illumination engineering, freeform technology is playing a more and more important role. Several methods have been reported in recent papers. The paper introduce a design method to generate an ellipse spot in the polar coordinate using the polar grids based on flux transportation mapping. In this method, the source is a point and the point is divided along the azimuth angle and zenith angle in the polar coordinate system. Then we divided the flux target in the polar coordinate, the grids of the target are achieved by the mapping between the source and the target. Based on the mapping and energy conservation, we can derive a set of the first-order PDE according to Snell’s law. We can acquire a points cloud after solving the PDE numerically, then we will construct a smooth freeform using Rhino. Finally, we will test the freeform using Light Tools. With this method, we can design a lens with the light utilization efficiency over 0.8. Keywords: LED; Freeform; Mapping; Polar coordinate.

Double moiré localized plasmon structured illumination microscopy

Abstract Structured illumination microscopy (SIM) is a well-established fluorescence imaging technique, which can increase spatial resolution by up to a factor of two. This article reports on a new way to extend the capabilities of structured illumination microscopy, by combining ideas from the fields of illumination engineering and nanophotonics. In this technique, plasmonic arrays of hexagonal symmetry are illuminated by two obliquely incident beams originating from a single laser. The resulting interference between the light grating and plasmonic grating creates a wide range of spatial frequencies above the microscope passband, while still preserving the spatial frequencies of regular SIM. To systematically investigate this technique and to contrast it with regular SIM and localized plasmon SIM, we implement a rigorous simulation procedure, which simulates the near-field illumination of the plasmonic grating and uses it in the subsequent forward imaging model. The inverse problem, of obtaining a super-resolution (SR) image from multiple low-resolution images, is solved using a numerical reconstruction algorithm while the obtained resolution is quantitatively assessed. The results point at the possibility of resolution enhancements beyond regular SIM, which rapidly vanishes with the height above the grating. In an initial experimental realization, the existence of the expected spatial frequencies is shown and the performance of compatible reconstruction approaches is compared. Finally, we discuss the obstacles of experimental implementations that would need to be overcome for artifact-free SR imaging.

Classification of the Calculation Methods of the Configuration Factors of Diffuse Radiation

This article presents the results of generalizing the existing methods for determining the diffuse radiation configuration factors for the radiation transfer calculation in the zone model of the system of bodies with complex-shaped surfaces. Such problems arise in determining construction temperatures, surface illumination, and construction of realistic images in various fields of science and technology: space, illumination engineering, civil engineering, power engineering, applied optics, computer graphics, etc. The classification of methods for determining CFs by the sources of computational errors is proposed. Four classes of methods are distinguished: exact, special, numerical integration, and combined methods. The methods are ranged into classes. The basic formulas and the formulas for numerically determining the CFs are given. The derived classification allows users and developers of the CFs’ calculation software to gain an understanding in the variety of methods and to select those methods that are most suitable for solving their problem. This classification may be used as a basis of the generalized algorithm and software complex for computing diffuse CFs for a wide variety of problems.

Thermodynamics of ideal illumination: a novel figure of merit for characterizing illumination efficiency.

The advancement of modern lighting technologies has led to many revolutions in lighting efficiency and presentation. The progression from filament bulbs, to CFL, and now LED technologies have produced a bounty of energy-efficient lighting options for design engineers and consumers. As the light-producing elements of a lighting fixture improve, the limiting factor in efficient illumination is no longer the light source, but the optical system itself. There are many characterization methods and standards for defining light for illumination in terms of color and human response. With concerns of how things like light pollution and energy requirements impact our society and the world around us, it is critical to understand how well a lighting fixture can illuminate a desired area while minimizing light lost to the environment and maximizing the total radiative intensity (radiance) of a space. This work presents two figures of merit, one for over-illumination and another for under-illumination, to characterize the optics of a lighting system based on a ray tracing methodology. Five common simplified optical design, with four varying beam angles, were simulated to present these new figures of merit. Results showed that common imaging optical systems such as parabolic and ellipse reflectors struggled to produce a well-lit area without over illumination, while nonimaging alternatives like the compound parabolic and compound elliptical reflectors were able to reach the thermodynamic ideal of a fully illuminated area without light lost to the environment. This work hopes to inform illumination engineers and lighting designers to help improve their optical design to maximize performance and minimize waste.

VIEW-MOD: a versatile illumination engine with a modular optical design for fluorescence microscopy.

We developed VIEW-MOD (Versatile Illumination Engine with a Modular Optical Design): a compact, multi-modality microscope, which accommodates multiple illumination schemes including variable angle total internal reflection, point scanning and vertical/horizontal light sheet. This system allows combining and flexibly switching between different illuminations and imaging modes by employing three electrically tunable lenses and two fast-steering mirrors. This versatile optics design provides control of 6 degrees of freedom of the illumination source (3 translation, 2 tilt, and beam shape) plus the axial position of the imaging plane. We also developed standalone software with an easy-to-use GUI to calibrate and control the microscope. We demonstrate the applications of this system and software in biosensor imaging, optogenetics and fast 3D volume imaging. This system is ready to fit into complex imaging circumstances requiring precise control of illumination and detection paths, and has a broad scope of usability for a myriad of biological applications.

View-mod: A versatile illumination engine with a modular optical design for fluorescence microscopy

View-mod: A versatile illumination engine with a modular optical design for fluorescence microscopy

Potensi Naskah-Naskah Islam Minangkabau untuk Industri Kreatif sebagai Pendukung Wisata Religi Ziarah di Sumatera Barat

The manuscripts of Minangkabau are mostly the collection of surau tarekat scattered in various places in West Sumatera. Some of the surau are always crowded visited by the congregation. Based on that phenomenon, this research is designed to discover and explore the potency of Minangkabau manuscripts that can be developed as a creative industry. Through these manuscripts are expected to provide support for the development of religious pilgrimage tour in West Sumatera which has not been managed properly and maximally until now. The method of the research applied is qualitative research method with three approaches, namely philology, codicology and creative industry. The data were collected through five stages, namely observation, recording and collection of manuscripts, literature studies, interviews and textual criticism. The technique applied in analyzing the data is based on the phenomenology approach to obtain a comprehensive understanding of the subject of the research. This study concludes that through the organization of the manuscripts containing the biographical content of tarekat scholars and their thought can turn the creative industries on, particularly the publishing sector. In addition, through illumination engineering (decoration in the script) can be developed into batik motifs. The publication of the selected manuscript text and the production of illuminated batik manuscripts can be a unique souvenir of religious pilgrimage tours in surau tarekat in West Sumatera.