IgG-binding Domain Of Protein Research Articles

Secondary structure dependence on simulation techniques and force field parameters: from disordered to ordered proteins.

Computer simulations are used for identifying the secondary structure properties of ordered and disordered proteins. However, our recent studies showed that the chosen computer simulation protocol, simulation technique, and force field parameter set for a disordered protein impact its predicted secondary structure properties. Here, we compare the outcome from computer simulations utilizing molecular dynamics simulations without parallel tempering techniques using various force field parameter sets and temperature-replica exchange molecular dynamics simulations both for a model ordered and two model disordered proteins. Specifically, the model ordered protein is the third IgG-binding domain of Protein G (GB3) and the two model disordered proteins are amyloid-β(1-40) and α-synuclein in water. Our findings clearly indicate that temperature-replica exchange molecular dynamics simulations and molecular dynamics simulations without special sampling techniques yield similar results for the ordered GB3 protein whereas such agreement between simulation techniques using various force field parameter sets could not be obtained for disordered proteins. These findings clearly indicate that a consensus has to be reached via further development in computer simulation technique and force field parameter sets for disordered proteins.

Dynamic cluster formation determines viscosity and diffusion in dense protein solutions

We develop a detailed description of protein translational and rotational diffusion in concentrated solution on the basis of all-atom molecular dynamics simulations in explicit solvent. Our systems contain up to 540 fully flexible proteins with 3.6 million atoms. In concentrated protein solutions (100 mg/mL and higher), the proteins ubiquitin and lysozyme, as well as the protein domains third IgG-binding domain of protein G and villin headpiece, diffuse not as isolated particles, but as members of transient clusters between which they constantly exchange. A dynamic cluster model nearly quantitatively explains the increase in viscosity and the decrease in protein diffusivity with protein volume fraction, which both exceed the predictions from widely used colloid models. The Stokes-Einstein relations for translational and rotational diffusion remain valid, but the effective hydrodynamic radius grows linearly with protein volume fraction. This increase follows the observed increase in cluster size and explains the more dramatic slowdown of protein rotation compared with translation. Baxter's sticky-sphere model of colloidal suspensions captures the concentration dependence of cluster size, viscosity, and rotational and translational diffusion. The consistency between simulations and experiments for a diverse set of soluble globular proteins indicates that the cluster model applies broadly to concentrated protein solutions, with equilibrium dissociation constants for nonspecific protein-protein binding in the Kd ≈ 10-mM regime.

Optical microchips based on high-affinity recombinant protein binders—Human serum albumin detection in urine

Recent developments in molecular evolution technologies have led to novel types of high-affinity recombinant protein binders (PB) able to substitute antibodies in many diagnostic and therapeutic applications. Despite almost a decade of research, they have so far only been sporadically used for biosensor construction. Here, we present a proof-of-principle comparative study focused on the application of three types of PB recognizing human serum albumin (HSA) in the fabrication of diagnostic optical microchips detecting clinically relevant HSA levels in urine. The PB tested were: (i) biotinylated anti-HSA Affibody (AF) (IgG binding domain of protein A, Staphylococcus aureus); (ii) biotinylated protein construct based on albumin-binding domain (ABD) of protein G (Streptococcus G148) fused with long TolA spacer (6xHis-WT-ABD-TolA-AviTag) and (iii) WT-ABD-Trp leader-streptavidin tetrameric fusion protein (SA-ABD-WT). Open glass microchips with 24 independent microwells (volume 8 μL) and micropatterned detection zones were prepared and used for oriented binding of proteins through the biotin/streptavidin chemistry. The analytical performance of the optical microchips was tested by performing direct specific detection of fluorescently labelled HSA in various environments. Results show that the length of peptide spacer present between the binding protein domain and sensor surface is a key factor influencing biosensor performance. The biosensor based on SA-ABD-WT reached the limit of detection (LOD) for HSA in urine (LOD = 0.65 μg/ml) sufficient to identify the chronic kidney disease caused by high blood pressure or diabetes. Furthermore, it offers the highest signal intensity, low noise and significant simplification of microchip preparation due to a simple one-step immobilization procedure. Our results may be further exploited in development of diagnostic microchips dedicated to the detection of a wide range of molecular targets recognized by specific ABD protein binders.

Molecular Determinants of Mutant Phenotypes, Inferred from Saturation Mutagenesis Data.

Understanding how mutations affect protein activity and organismal fitness is a major challenge. We used saturation mutagenesis combined with deep sequencing to determine mutational sensitivity scores for 1,664 single-site mutants of the 101 residue Escherichia coli cytotoxin, CcdB at seven different expression levels. Active-site residues could be distinguished from buried ones, based on their differential tolerance to aliphatic and charged amino acid substitutions. At nonactive-site positions, the average mutational tolerance correlated better with depth from the protein surface than with accessibility. Remarkably, similar results were observed for two other small proteins, PDZ domain (PSD95pdz3) and IgG-binding domain of protein G (GB1). Mutational sensitivity data obtained with CcdB were used to derive a procedure for predicting functional effects of mutations. Results compared favorably with those of two widely used computational predictors. In vitro characterization of 80 single, nonactive-site mutants of CcdB showed that activity in vivo correlates moderately with thermal stability and solubility. The inability to refold reversibly, as well as a decreased folding rate in vitro, is associated with decreased activity in vivo. Upon probing the effect of modulating expression of various proteases and chaperones on mutant phenotypes, most deleterious mutants showed an increased in vivo activity and solubility only upon over-expression of either Trigger factor or SecB ATP-independent chaperones. Collectively, these data suggest that folding kinetics rather than protein stability is the primary determinant of activity in vivo. This study enhances our understanding of how mutations affect phenotype, as well as the ability to predict fitness effects of point mutations.

Kinetics of the Antibody Recognition Site in the Third IgG‐Binding Domain of Protein G

AbstractProtein dynamics occurring on a wide range of timescales play a crucial role in governing protein function. Particularly, motions between the globular rotational correlation time ( ) and 40 μs (supra‐ window), strongly influence molecular recognition. This supra‐ window was previously hidden, owing to a lack of experimental methods. Recently, we have developed a high‐power relaxation dispersion (RD) experiment for measuring kinetics as fast as 4 μs. For the first time, this method, performed under super‐cooled conditions, enabled us to detect a global motion in the first β‐turn of the third IgG‐binding domain of protein G (GB3), which was extrapolated to 371±115 ns at 310 K. Furthermore, the same residues show the plasticity in the model‐free residual dipolar coupling (RDC) order parameters and in an ensemble encoding the supra‐ dynamics. This β‐turn is involved in antibody binding, exhibiting the potential link of the observed supra‐ motion with molecular recognition.

Kinetics of the Antibody Recognition Site in the Third IgG-Binding Domain of Protein G.

Protein dynamics occurring on a wide range of timescales play a crucial role in governing protein function. Particularly, motions between the globular rotational correlation time (τc ) and 40 μs (supra-τc window), strongly influence molecular recognition. This supra-τc window was previously hidden, owing to a lack of experimental methods. Recently, we have developed a high-power relaxation dispersion (RD) experiment for measuring kinetics as fast as 4 μs. For the first time, this method, performed under super-cooled conditions, enabled us to detect a global motion in the first β-turn of the third IgG-binding domain of protein G (GB3), which was extrapolated to 371±115 ns at 310 K. Furthermore, the same residues show the plasticity in the model-free residual dipolar coupling (RDC) order parameters and in an ensemble encoding the supra-τc dynamics. This β-turn is involved in antibody binding, exhibiting the potential link of the observed supra-τc motion with molecular recognition.

ProCS15: a DFT-based chemical shift predictor for backbone and Cβ atoms in proteins.

We present ProCS15: a program that computes the isotropic chemical shielding values of backbone and Cβ atoms given a protein structure in less than a second. ProCS15 is based on around 2.35 million OPBE/6-31G(d,p)//PM6 calculations on tripeptides and small structural models of hydrogen-bonding. The ProCS15-predicted chemical shielding values are compared to experimentally measured chemical shifts for Ubiquitin and the third IgG-binding domain of Protein G through linear regression and yield RMSD values of up to 2.2, 0.7, and 4.8 ppm for carbon, hydrogen, and nitrogen atoms. These RMSD values are very similar to corresponding RMSD values computed using OPBE/6-31G(d,p) for the entire structure for each proteins. These maximum RMSD values can be reduced by using NMR-derived structural ensembles of Ubiquitin. For example, for the largest ensemble the largest RMSD values are 1.7, 0.5, and 3.5 ppm for carbon, hydrogen, and nitrogen. The corresponding RMSD values predicted by several empirical chemical shift predictors range between 0.7–1.1, 0.2–0.4, and 1.8–2.8 ppm for carbon, hydrogen, and nitrogen atoms, respectively.

Protein Evolution across Fold Classes: A 3-α-Helix Bundle can Switch to β, α/β, and α+β Folds by Stepwise Mutation

The mechanism for the evolution of new protein folds remains obscure. Recent examples of proteins with high levels of sequence identity but different folds have given new impetus to the hypothesis that proteins can evolve via stepwise mutation. Few examples of these metamorphic proteins are available, however, concealing the number of conformational alternatives accessible to a given fold. Here we show that stepwise mutation can switch one fold, a 3-α-helix bundle, to three radically different conformations: β-sheet, α/β/α-sandwich, and α/β-grasp. Specifically, we engineered three variants of the human serum albumin binding domain of protein G (GA, 3-α-helix bundle) to have >50% sequence identity to three other proteins: a subdomain within outer surface protein A (OspA, β-sheet), a subdomain within maltose binding protein (MBP, α/β/α-sandwich), and the IgG-binding domain of protein G (GB, α/β-grasp). Additional modifications to the sequences of these alternative folds yielded three fold pairs with high levels of sequence identity: 77% (GA-OspA), 80% (GA-MBP), and 98% (GA-GB). This network of switchable folds links all four major fold families, mainly α (3-α-helix bundle), mainly β (β-sheet), α/β (α/β/α-sandwich), and α+β (α/β-grasp), demonstrating that stepwise mutation can switch one protein fold to multiple disparate conformations. Furthermore, cross-pair sequence identity levels are consistent with identity cut-offs determined from the PDB: pairwise sequence alignments of all GA variants are >40% identical, while pairwise sequence alignments of the three alternative folds are <30% identical. Together, these results demonstrate that stepwise mutation can induce one parent fold to spawn multiple new folds in a way that is consistent with observations of experimentally determined protein structures.

A Comprehensive Biophysical Description of Pairwise Epistasis throughout an Entire Protein Domain

Nonadditivity in fitness effects from two or more mutations, termed epistasis, can result in compensation of deleterious mutations or negation of beneficial mutations. Recent evidence shows the importance of epistasis in individual evolutionary pathways. However, an unresolved question in molecular evolution is how often and how significantly fitness effects change in alternative genetic backgrounds. To answer this question, we quantified the effects ofall single mutations and double mutations between all positions in the IgG-binding domain of protein G (GB1). By observing the first two steps of all possible evolutionary pathways using this fitness profile, we were able to characterize the extent and magnitude of pairwise epistasis throughout an entire protein molecule. Furthermore, we developed a novel approach to quantitatively determine the effects of single mutations on structural stability (ΔΔGU). This enabled determination of the importance of stability effects in functional epistasis. Our results illustrate common biophysical mechanisms for occurrences of positive and negative epistasis. Our results show pervasive positive epistasis within a conformationally dynamic network of residues. The stability analysis shows that significant negative epistasis, which is more common than positive epistasis, mostly occurs between combinations of destabilizing mutations. Furthermore, we show that although significant positive epistasis is rare, many deleterious mutations are beneficial in at least one alternative mutational background. The distribution of conditionally beneficial mutations throughout the domain demonstrates that the functional portion of sequence space can be significantly expanded by epistasis.

Probing the Effects of Cysteine Residues on Protein Adsorption onto Gold Nanoparticles Using Wild-Type and Mutated GB3 Proteins

The role of cysteine residues in the protein binding kinetics and stability on gold nanoparticles (AuNP) was studied using AuNP localized surface plasmon resonance (LSPR) in combination with an organothiol (OT) displacement method. GB3, the third IgG-binding domain of protein G, was used to model protein-AuNP adsorption. While wild-type GB3 (GB30) contains no cysteine residues, bioengineered GB3 variants containing one (GB31) and two (GB32) cysteine residues were also tested. The cysteine content has no significant effect on GB3 binding kinetics with AuNPs, and most protein adsorption occurs within the first few seconds upon protein/AuNP mixing. However, the stability of GB3 on the AuNP surface against OT displacement depends strongly on the cysteine content and the age of the AuNP/GB3 mixture. The GB30 covered AuNPs can be completely destabilized and aggregated by OTs, regardless of the age of the GB30/AuNP mixtures. Long-time incubation of GB31 or GB32 with AuNPs can stabilize AuNPs against the OT adsorption inducted aggregation. This study indicates that multiple forces involved in the GB3/AuNP interaction, and covalent binding between cysteine and AuNP is essential for a stable protein/AuNP complex.

In Vivo Self-Assembly of Fluorescent Protein Microparticles Displaying Specific Binding Domains

In this study, fluorescent proteins (FPs) were engineered to self-assemble into protein particles inside recombinant Escherichia coli while mediating the display of various protein functionalities such as maltose binding protein or IgG binding domains of Protein A or G, respectively. Escherichia coli produced functional FP particles of up to 30% of cellular dry weight. The use of respective FP particles displaying certain binding domains in diagnostics and as bioseparation resins was demonstrated by direct comparison to commercial offerings. It was demonstrated that variable extensions (AVTS, FHKP, LAVG, or TS) of the N-terminus of FPs (GFP, YFP, CFP, HcRed) in combination with large C-terminal extensions such as translational fusion of the polyester synthase from Ralstonia eutropha or an aldolase from Escherichia coli led to extensive intracellular self-assembly of strongly fluorescent fusion protein particles of oval shape (0.5×1 μm). The strong fluorescent label of these bioparticles in combination with covalent display of protein functions provides a molecular toolbox for the design of self-assembled microparticles suitable for antibody-capture or ligand binding based diagnostic assays as well as the high affinity purification of target compounds such as antibodies.

Hydration Dynamics of a Halophilic Protein in Folded and Unfolded States

Proteins from halophilic microorganisms thriving at high salinity have an excess of charged carboxylate groups, and it is widely believed that this gives rise to an exceptionally strong hydration that stabilizes these proteins against unfolding and aggregation. Here, we examine this hypothesis by characterizing the hydration dynamics of a halophilic model protein with frequency- and temperature-dependent (17)O magnetic relaxation. The halophilic protein Kx6E was constructed by replacing six lysine residues with glutamate residues in the IgG binding domain of protein L. We also studied the unfolded form of Kx6E in the absence of salt. We find that the hydration dynamics of Kx6E does not differ from protein L or from other previously studied mesophilic proteins. This finding challenges the hypothesis of exceptional hydration for halophilic proteins. The unfolded form of Kx6E is found to be expanded, with a weaker dynamical perturbation of the hydration water than for folded proteins.

Protein G, Protein A and Protein A-Derived Peptides Inhibit the Agitation Induced Aggregation of IgG

Controlling and preventing aggregation is critical to the development of safe and effective antibody drug products. The studies presented here test the hypothesis that protein A and protein G inhibit the agitation-induced aggregation of IgG. The hypothesis is motivated by the enhanced conformational stability of proteins upon ligand binding and the specific binding affinity of protein A and protein G to the Fc region of IgG. The aggregation of mixed human IgG from pooled human plasma was induced by agitation alone or in the presence of (i) protein A, (ii) protein G or (iii) a library of 24 peptides derived from the IgG-binding domain of protein A. Aggregation was assessed by UV spectroscopy, SDS-PAGE, high performance size-exclusion chromatography (HP-SEC), dynamic light scattering (DLS) and fluorescence spectroscopy. Additional information on IgG-ligand interactions was obtained using differential scanning fluorimetry (DSF) and competitive binding studies. The results demonstrate that protein A provides near-complete inhibition of agitation-induced aggregation, while protein G and two peptides from the peptide library show partial inhibition. The findings indicate that the IgG protein A-binding site is involved in the agitation-induced aggregation of IgG, and suggest a dominant role of colloidal interactions.

Fragment density functional theory calculation of NMR chemical shifts for proteins with implicit solvation

Fragment density functional theory (DFT) calculation of NMR chemical shifts for several proteins (Trp-cage, Pin1 WW domain, the third IgG-binding domain of Protein G (GB3) and human ubiquitin) has been carried out. The present study is based on a recently developed automatic fragmentation quantum mechanics/molecular mechanics (AF-QM/MM) approach but the solvent effects are included by using the PB (Poisson-Boltzmann) model. Our calculated chemical shifts of (1)H and (13)C for these four proteins are in excellent agreement with experimentally measured values and represent clear improvement over that from the gas phase calculation. However, although the inclusion of the solvent effect also improves the computed chemical shifts of (15)N, the results do not agree with experimental values as well as (1)H and (13)C. Our study also demonstrates that AF-QM/MM calculated results accurately reproduce the separation of α-helical and β-sheet chemical shifts for (13)C(α) atoms in proteins, and using the (1)H chemical shift to discriminate the native structure of proteins from decoys is quite remarkable.

Ultrahigh resolution protein structures using NMR chemical shift tensors

NMR chemical shift tensors (CSTs) in proteins, as well as their orientations, represent an important new restraint class for protein structure refinement and determination. Here, we present the first determination of both CST magnitudes and orientations for (13)Cα and (15)N (peptide backbone) groups in a protein, the β1 IgG binding domain of protein G from Streptococcus spp., GB1. Site-specific (13)Cα and (15)N CSTs were measured using synchronously evolved recoupling experiments in which (13)C and (15)N tensors were projected onto the (1)H-(13)C and (1)H-(15)N vectors, respectively, and onto the (15)N-(13)C vector in the case of (13)Cα. The orientations of the (13)Cα CSTs to the (1)H-(13)C and (13)C-(15)N vectors agreed well with the results of ab initio calculations, with an rmsd of approximately 8°. In addition, the measured (15)N tensors exhibited larger reduced anisotropies in α-helical versus β-sheet regions, with very limited variation (18 ± 4°) in the orientation of the z-axis of the (15)N CST with respect to the (1)H-(15)N vector. Incorporation of the (13)Cα CST restraints into structure calculations, in combination with isotropic chemical shifts, transferred echo double resonance (13)C-(15)N distances and vector angle restraints, improved the backbone rmsd to 0.16 Å (PDB ID code 2LGI) and is consistent with existing X-ray structures (0.51 Å agreement with PDB ID code 2QMT). These results demonstrate that chemical shift tensors have considerable utility in protein structure refinement, with the best structures comparable to 1.0-Å crystal structures, based upon empirical metrics such as Ramachandran geometries and χ(1)/χ(2) distributions, providing solid-state NMR with a powerful tool for de novo structure determination.

Biophysical Characterization of the Igg Binding Domains of Protein a In Staphylococcus Aureus

Staphylococcus aureus is a gram positive bacterium found in the skin flora of most humans. Some strains of S. aureus produce enterotoxins that can cause toxic shock syndrome, food poisoning, and sepsis. The emergence of multidrug resistant staph infections has become a significant health problem in hospitals. Part of S. aureus’ virulence comes from Protein A, which binds to the Fc region of antibodies and inhibits opsonization. Protein A from Staphylococcus aureus has five homologous antibody binding domains, arranged in tandem repeats in the N-terminal half of the protein (SpA-N). Due to the highly repetitive nature of the gene, we synthesized and cloned it into an E. coli expression vector. Our previous studies of the B-domain of Protein A (BdpA) show that the folded state lifetime is ∼10 milliseconds, meaning that BdpA samples its unfolded state 100 times per second. We hypothesize that this cycle of unfolding and refolding may confer flexibility to Protein A, which is crucial for the migration of the protein from the ribosome to the cell wall. To test this, we have designed a new approach to measure protein flexibility: Dynamic Shear Force Microscopy (DSFM). Along with DSFM , we have conducted preliminary biophysical analysis of SpA-N using methods such as analytical ultracentrifugation, circular dichroism spectroscopy, and fluorescence measurements.

Protein Stabilization and the Hofmeister Effect: The Role of Hydrophobic Solvation

Using the IGg binding domain of protein L from Streptoccocal magnus (ProtL) as a case study, we investigated how the anions of the Hofmeister series affect protein stability. To that end, a suite of lysine-to-glutamine modifications were obtained and structurally and thermodynamically characterized. The changes in stability introduced with the mutation are related to the solvent-accessible area of the side chain, specifically to the solvation of the nonpolar moiety of the residue. The thermostability for the set of ProtL mutants was determined in the presence of varying concentrations (0–1 M) of six sodium salts from the Hofmeister series: sulfate, phosphate, fluoride, nitrate, perchlorate, and thiocyanate. For kosmotropic anions (sulfate, phosphate, and fluoride), the stability changes induced by the cosolute (encoded in m 3 = δ Δ G 0 / δ C 3 ) are proportional to the surface changes introduced with the mutation. In contrast, the m 3 values measured for chaotropic anions are much more independent of such surface modifications. Our results are consistent with a model in which the increase in the solution surface tension induced by the anion stabilizes the folded conformation of the protein. This contribution complements the nonspecific and weak interactions between the ions and the protein backbone that shift the equilibrium toward the unfolded state.

Expression and purification of the calcium binding photoprotein mitrocomin using ZZ-domain as a soluble partner in E. coli cells

We constructed a vector for soluble protein expression in the cytoplasm of Escherichia coli cells using the cold induced system. The vector, named pCold-ZZ-P-X, consists of a histidine tag sequence, IgG binding domain of protein A (ZZ domain), the cleavage site of human rhinovirus 3C protease followed by the multiple cloning sites under the controlled of the cold shock protein A ( cspA) promoter and the lac operator. Using this expression vector, the calcium binding photoprotein mitrocomin from luminous jellyfish was successfully expressed as a soluble ZZ fusion protein and purified. After removing the ZZ domain by protease digestion, recombinant apomitrocomin was obtained and then regenerated to mitrocomin by incubation with coelenterazine. The luminescence properties of recombinant mitrocomin were characterized and compared to other photoproteins including aequorin, clytin-I and clytin-II.

Soluble protein expression in E. coli cells using IgG-binding domain of protein A as a solubilizing partner in the cold induced system

We constructed a cold induced expression vector in Escherichia coli cells that consists of a histidine tag sequence for nickel chelate affinity purification, IgG-binding domain of protein A (ZZ-domain) and the multiple cloning sites. The role of ZZ-domain as a solubilizing partner at 15°C was demonstrated by expressing the imidazopyrazinone-type luciferases of Renilla, Oplophorus, Gaussia, and Vargula (Cypridina) as well as the calcium-binding photoproteins and firefly luciferase. The fused protein with ZZ-domain was expressed efficiently as a soluble form in the cytoplasm of E. coli cells at low temperature.

Protein backbone motions viewed by intraresidue and sequential HN–Hα residual dipolar couplings

Triple resonance E.COSY-based techniques were used to measure intra-residue and sequential H(N)-H(alpha) residual dipolar couplings (RDCs) for the third IgG-binding domain of protein G (GB3), aligned in Pf1 medium. Measurements closely correlate with values predicted on the basis of an NMR structure, previously determined on the basis of a large number of one-bond backbone RDCs measured in five alignment media. However, in particular the sequential H(N)-H(alpha) RDCs are smaller than predicted for a static structure, suggesting a degree of motion for these internuclear vectors that exceeds that of the backbone amide N-H vectors. Of all experimentally determined GB3 structures available, the best correlation between experimental (1)H-(1)H couplings is observed for a GB3 ensemble, previously derived to generate a realistic picture of the conformational space sampled by GB3 (Clore and Schwieters, J Mol Biol 355:879-886, 2006). However, for both NMR and X-ray-derived structures the (1)H-(1)H couplings are found to be systematically smaller than expected on the basis of alignment tensors derived from (15)N-(1)H amide RDCs, assuming librationally corrected N-H bond lengths of 1.041 A.