Hyperthermophilic Archaeon Thermococcus Sp Research Articles

The two CO-dehydrogenases of Thermococcus sp. AM4

Ni-containing CO-dehydrogenases (CODHs) allow some microorganisms to couple ATP synthesis to CO oxidation, or to use either CO or CO2 as a source of carbon. The recent detailed characterizations of some of them have evidenced a great diversity in terms of catalytic properties and resistance to O2. In an effort to increase the number of available CODHs, we have heterologously produced in Desulfovibrio fructosovorans, purified and characterized the two CooS-type CODHs (CooS1 and CooS2) from the hyperthermophilic archaeon Thermococcus sp. AM4 (Tc). We have also crystallized CooS2, which is coupled in vivo to a hydrogenase. CooS1 and CooS2 are homodimers, and harbour five metalloclusters: two [Ni4Fe-4S] C clusters, two [4Fe-4S] B clusters and one interfacial [4Fe-4S] D cluster. We show that both are dependent on a maturase, CooC1 or CooC2, which is interchangeable. The homologous protein CooC3 does not allow Ni insertion in either CooS. The two CODHs from Tc have similar properties: they can both oxidize and produce CO. The Michaelis constants (Km) are in the microM range for CO and in the mM range (CODH 1) or above (CODH 2) for CO2. Product inhibition is observed only for CO2 reduction, consistent with CO2 binding being much weaker than CO binding. The two enzymes are rather O2 sensitive (similarly to CODH II from Carboxydothermus hydrogenoformans), and react more slowly with O2 than any other CODH for which these data are available.

Cloning and characterization of a novel fold-type I branched-chain amino acid aminotransferase from the hyperthermophilic archaeon Thermococcus sp. CKU-1

We successfully cloned a novel branched-chain amino acid aminotransferase (Ts-BcAT; EC 2.6.1.42) gene from the Thermococcus sp. CKU-1 genome and expressed it in the soluble fraction of Escherichia coli Rosetta (DE3) cells. Ts-BcAT is a homodimer with an apparent molecular mass of approximately 92 kDa. The primary structure of Ts-BcAT showed high homology with the fold-type I, subgroup I aminotransferases, but showed little homology with BcATs known to date, i.e., those of Escherichia coli and Salmonella typhimurium, which belong to the fold-type IV, subgroup III aminotransferases. The maximum enzyme activity of Ts-BcAT was detected at 95 °C, and Ts-BcAT did not lose any enzyme activity, even after incubation at 90 °C for 5 h. Ts-BcAT was active in the pH range from 4.0 to 11.0, the optimum pH was 9.5, and the enzyme was stable between pH 6 and 7. The exceptionally low pK a of the nitrogen atom in the Lys258 ε-amino group in the internal aldimine bond of Ts-BcAT was determined to be 5.52 ± 0.05. Ts-BcAT used 21 natural and unnatural amino acids as a substrate in the overall transamination reaction. L-Leucine and other aliphatic amino acids are efficient substrates, while polar amino acids except glutamate were weak substrates. Phylogenetic analysis revealed that Ts-BcAT is a novel fold-type I, subgroup I branched-chain aminotransferase.

Bioinformatic and biochemical analysis of a novel maltose-forming α-amylase of the GH57 family in the hyperthermophilic archaeon Thermococcus sp. CL1

Maltose-forming α-amylase is a glycoside hydrolase family 57 (GH57) member that is unique because it displays dual hydrolysis activity toward α-1,4- and α-1,6-glycosidic linkages and only recognizes maltose. This enzyme was previously identified only in Pyrococcus sp. ST04 (PSMA); however, we recently found two homologs subgroups in Thermococcus species. One subgroup (subgroup A) showed relatively high amino acid sequence similarity to PSMA (>71%), while the other subgroup (subgroup B) showed lower homology with PSMA (<59%). To characterize the subgroup B maltose-forming α-amylase from Thermococcus species (TCMA), we cloned the CL1_0868 gene from Thermococcus sp. CL1 and then successfully expressed the gene in Escherichia coli. Although TCMA has a different oligomeric state relative to PSMA, TCMA showed similar substrate specificity. However, TCMA was shown to hydrolyze maltooligosaccharides more easily than PSMA. Also, TCMA displayed different optimum conditions depending on the glycosidic linkage of the substrate. TCMA had the highest activity at 85°C and at pH 5.0 for α-1,4-glycosidic linkage hydrolysis whereas it showed its maximal activity to cleave α-1,6-glycosidic linkages at 98°C and pH 6.0.

Molecular Cloning and Enzymatic Characterization of Cyclomaltodextrinase from Hyperthermophilic Archaeon Thermococcus sp. CL1

Genome organization near cyclomaltodextrinases (CDases) was analyzed and compared for four different hyperthermophilic archaea: Thermococcus, Pyrococcus, Staphylothermus, and Thermofilum. A gene (CL1_0884) encoding a putative CDase from Thermococcus sp. CL1 (tccd) was cloned and expressed in Escherichia coli. TcCD was confirmed to be highly thermostable, with optimal activity at 85℃. The melting temperature of TcCD was determined to be 93oC by both differential scanning calorimetry and differential scanning fluorimetry. A size-exclusion chromatography experiment showed that TcCD exists as a monomer. TcCD preferentially hydrolyzed α-cyclodextrin (α-CD), and at the initial stage catalyzed a ring-opening reaction by cleaving one α-1,4-glycosidic linkage of the CD ring to produce the corresponding single maltooligosaccharide. Furthermore, TcCD could hydrolyze branched CDs (G1-α-CD, G1-β- CD, and G2-β-CD) to yield significant amounts (45%, 40%, and 46%) of isomaltooligosaccharides (panose and 6(2)-α-maltosylmaltose) in addition to glucose and maltose. This enzyme is one of the most thermostable maltogenic amylases reported, and might be of potential value in the production of isomaltooligosaccharides in the food industry.

Complete Genome Sequence of the Hyperthermophilic Archaeon Thermococcus sp. Strain CL1, Isolated from a Paralvinella sp. Polychaete Worm Collected from a Hydrothermal Vent

Thermococcus sp. strain CL1 is a hyperthermophilic, anaerobic, and heterotrophic archaeon isolated from a Paralvinella sp. polychaete worm living on an active deep-sea hydrothermal sulfide chimney on the Cleft Segment of the Juan de Fuca Ridge. To further understand the distinct characteristics of this archaeon at the genome level, its genome was completely sequenced and analyzed. Here, we announce the complete genome sequence (1,950,313 bp) of Thermococcus sp. strain CL1, with a focus on H(2)- and energy-producing capabilities and its amino acid biosynthesis and acquisition in an extreme habitat.

Complete Genome Sequence of the Hyperthermophilic Archaeon Thermococcus sp. Strain AM4, Capable of Organotrophic Growth and Growth at the Expense of Hydrogenogenic or Sulfidogenic Oxidation of Carbon Monoxide

Analysis of the complete genome of Thermococcus sp. strain AM4, which was the first lithotrophic Thermococcales isolate described and the first archaeal isolate to exhibit a capacity for hydrogenogenic carboxydotrophy, reveals a proximity with Thermococcus gammatolerans, corresponding to close but distinct species that differ significantly in their lithotrophic capacities.

Characterization of prolyl oligopeptidase from hyperthermophilic archaeon Thermococcus sp. NA1

The prolyl oligopeptidase TNA1_POP was found to be encoded in the genome of the hyperthermophilic archaeon Thermococcus sp. NA1 and showed high similarities to its archaeal homologs (76-83%). The enzyme was found to be a single polypeptide composed of 616 amino acids with conserved signature domains. A recombinant TNA1_POP expressed in Escherichia coli was capable of hydrolyzing succinyl-Ala-Pro-p-nitroanilide (Suc-Ala-Pro-pNA) with temperature and pH optimums of 80 degrees C and 7, respectively. TNA1_POP activity appeared to be significantly activated by pre-incubation at 80 degrees C and 90 degrees C with the optimum temperature unchanged. The heat-activated enzyme exhibited a k(cat) approximately twofold higher than that of the unheated enzyme, however, both enzymes showed the same K(m). TNA1_POP was thermostable at 80 degrees C retaining 80% of its heat-activated activity even after 23 h, but it lost its enzymatic activity at 90 degrees C with a half-life of 3 h. The loss of the enzymatic activity at 90 degrees C seemed to be caused by the autodegradation of the enzyme, not by thermal denaturation, as supported by circular dichroism spectropolarimetry. Autodegradation fragments ranging from 2 to 18 kDa were mapped by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry.

Cloning, Expression, and Characterization of a Methionyl Aminopeptidase from a Hyperthermophilic Archaeon Thermococcus sp. NA1

Genomic analysis of a hyperthermophilic archaeon Thermococcus sp. NA1 revealed the presence of an 885-bp open reading frame encoding a protein of 295 amino acids with a calculated molecular mass of 32,981 Da. Analysis of the deduced amino acid sequence showed that amino acid residues important for catalytic activity and the metal binding ligands conserved in all of methionyl aminopeptidases (MetAP) were also conserved and belonged to type IIa MetAP. The protein, designated TNA1_MetAP (Thermococcus sp. NA1 MetAP), was cloned and expressed in Escherichia coli. The recombinant enzyme was a Mn(2+)-, Ni(2+)-, Fe(2+)-, or Co(2+)-dependent metallopeptidase. Optimal MetAP activity against L: -methionine p-nitroanilide (Met-pNA) (K (m) = 0.68 mM) occurred at pH 7.0 and 80 to 90 degrees C. The MetAP was very unstable compared to Pyrococcus furiosus MetAP, which was completely inactivated by heating at 80 degrees C for 5 min. It seemed likely that the cysteine residue (Cys53) played a critical role in regulating the thermostability of TNA1_MetAP.

Cloning, Expression, and Characterization of a DNA Ligase from a Hyperthermophilic Archaeon Thermococcus Sp.

Genomic analysis of a hyperthermophilic archaeon, Thermococcus sp. NA1, revealed an ORF of 1689 bases encoding 562 amino acids that showed a high similarity to DNA ligases from other hyperthermophilic archaea. The ligase, which was designated TNA1_lig (Thermococcus sp. NA1 ligase), was cloned and expressed in Escherichia coli. The recombinant TNA1_lig was purified by metal affinity chromatography. The optimum ligase activity of the recombinant TNA1_lig occurred at 80 degrees C and pH 7.5. The enzyme was activated by MgCl2 and ZnCl2 but was inhibited by MnCl2 and NiCl2. Additionally, the enzyme was activated by either ATP or NAD+.

A novel neutral amino acid transporter from the hyperthermophilic archaeon Thermococcus sp. KS-1.

A novel gene encoding a small neutral amino acid transporter was cloned from the genome of the hyperthermophilic archaeon Thermococcus sp. KS-1 by functional cloning using Escherichia coli strain AK430, which is defective in transporting glycine and D-alanine. The cloned gene, snatA, encoded a protein of 216 amino acid residues, SnatA, and was predicted to be a membrane protein with six membrane-spanning segments. E. coli AK430 cells transformed with snatA transported glycine with an apparent K(t) value of 24 micro M, which was one order of magnitude higher than that of other known glycine/alanine transporters, including cycA of E. coli and acp of thermophilic bacterium PS3. Competition studies revealed that SnatA transported various L-type neutral amino acids, but its substrate specificity was different from that of CycA or ACP. The glycine transport was inhibited by a protonophore, FCCP, or valinomycin plus nigericin, indicating that the process is dependent on an electrochemical potential of H(+). Homology searches revealed no homology with any transporters known to date. However, several hypothetical genes in prokaryote cells enrolled in the gene bank showed significantly high homology scores, indicating that snatA and its homologues form a family of prokaryotes. To our knowledge, this is the first report on the cloning of a gene of an amino acid transporter from a hyperthermophilic archaeon.

Extracellular synthesis, specific recognition, and intracellular degradation of cyclomaltodextrins by the hyperthermophilic archaeon Thermococcus sp. strain B1001.

A unique extracellular and thermostable cyclomaltodextrin glucanotransferase (CGTase) from the hyperthermophilic archaeon Thermococcus sp. strain B1001 produces predominantly (>85%) alpha-cyclomaltodextrin (alpha-CD) from starch (Y. Tachibana, et al., Appl. Environ. Microbiol. 65:1991--1997, 1999). Nucleotide sequencing of the CGTase gene (cgtA) and its flanking region was performed, and a cluster of five genes was found, including a gene homolog encoding a cyclomaltodextrinase (CDase) involved in the degradation of CDs (cgtB), the gene encoding CGTase (cgtA), a gene homolog for a CD-binding protein (CBP) (cgtC), and a putative CBP-dependent ABC transporter involved in uptake of CDs (cgtDE). The CDase was expressed in Escherichia coli and purified. The optimum pH and temperature for CD hydrolysis were 5.5 and 95 degrees C, respectively. The molecular weight of the recombinant enzyme was estimated to be 79,000. The CDase hydrolyzed beta-CD most efficiently among other CDs. Maltose and pullulan were not utilized as substrates. Linear maltodextrins with a small glucose unit were very slowly hydrolyzed, and starch was hydrolyzed more slowly. Analysis by thin-layer chromatography revealed that glucose and maltose were produced as end products. The purified recombinant CBP bound to maltose as well as to alpha-CD. However, the CBP exhibited higher thermostability in the presence of alpha-CD. These results suggested that strain B1001 possesses a unique metabolic pathway that includes extracellular synthesis, transmembrane uptake, and intracellular degradation of CDs in starch utilization. Potential advantages of this starch metabolic pathway via CDs are discussed.

Alteration of product specificity of cyclodextrin glucanotransferase from Thermococcus sp. B1001 by site-directed mutagenesis

Cyclodextrin glucanotransferase (CGTase) from the hyperthermophilic archaeon Thermococcus sp. B1001 catalyzed the production predominantly of α-cyclodextrin (CD) from starch (Tachibana, Y. et al., Appl. Environ. Microbiol., 65, 1991–1997, 1999). The CGTase gene ( cgtA) from this strain was cloned and sequenced. It was composed of 2217 nucleotides, and encoded a protein (739 amino acids) with a molecular mass of 83,240 Da. Recombinant CgtA expressed in Escherichia coli also catalyzed the production predominantly of α-CD from starch, as did native CgtA from strain B1001. Based on a substrate binding model of Bacillus circulans no. 8 CGTase, Tyr100, Trp191 and Tyr267 were specified to locate the spiral amylose and to minimize the size of the CD by saccharide aromatics interaction. In order to determine the critical residue for catalyzing production predominantly of α-CD, site-directed mutations were introduced in CgtA (Y100W, Tyr100→Trp; W191Y, Trp191→Tyr; W191F, Trp191→Phe; Y267W, Tyr267→Trp; Y267F, Tyr267→Phe). Analysis of the reaction products by HPLC revealed that the mutant enzyme Y267W produced more β- and γ-CD than the wild-type enzyme. However, the other mutants still produced high levels of α-CD, suggesting that Tyr267 plays a critical role in α-CD production catalyzed by B1001 CGTase.

In Vitro Heat Effect on Functional and Conformational Changes of Cyclodextrin Glucanotransferase from Hyperthermophilic Archaea

The in vitro heat effect on protein characteristics of thermostable enzyme was examined using a cyclodextrin glucanotransferase (CGTase, EC 2.4.1.19) from the hyperthermophilic archaeon Thermococcus sp. B1001 as a model protein. The recombinant form of CGTase was obtained as an inclusion body from Escherichia coli cells harboring a plasmid which carried the B1001 CGTase gene (cgtA). CGTase was solubilized by 6 M urea, refolded, purified to homogeneity, and heat treated at 80°C for 20 min. Enzyme characteristics were examined compared with those of unheated CGTase. Cyclization activity was increased by in vitro heat treatment, while hydrolysis activity was decreased. The heated and unheated CGTases were analyzed for structures by circular dichroism (CD). The near- and far-UV CD spectra indicated that the structure of unheated CGTase with low cyclization activity was different from that of heated CGTase with high activity. Differential scanning calorimetry of unheated CGTase showed two absorption peaks at 87 and 106°C with increasing temperature. After heat treatment, the minor peak at 87°C disappeared, suggesting that heat-dependent structural conversion occurred in CGTase. These results indicate that the thermal environment plays an important role for the protein folding process of thermostable CGTase.

Cloning and characterisation of a thermostable alpha-DNA polymerase from the hyperthermophilic archaeon Thermococcus sp. TY.

The gene for an extremely thermostable DNA polymerase has been cloned from chromosomal DNA of the recently characterised hyperthermophilic archaeon Thermococcus sp. TY by using degenerate primers derived from consensus sequences of known archaeal enzymes. The corresponding enzyme was overexpressed in Escherichia coli. Sequence comparison of the gene with related DNA polymerase genes revealed that it is interrupted by three regions showing high similarities to self-splicing protein elements, so-called "inteins". This is the first DNA polymerase containing such a large number of self-splicing elements. To ensure an efficient expression, these regions were deleted on the DNA level. The resulting protein showed DNA polymerase and 3'-5' exonuclease activity at high temperatures, being a promising candidate for use in the polymerase chain reaction (PCR).