Magnetic Hyperthermia Research Articles

Study of La1−xSrxMnO3 nanoparticles: synthesis, magnetic properties and their hyperthermia applications

In this investigation, we synthesized nano-sized perovskite LSMO and Cu-doped LSMCx materials using the sol–gel method, exhibiting appropriate Curie temperatures and magnetic attributes conducive to the application of self-controlled hyperthermia. Centrifugal separation has been used to reduce particle size distribution and thus analyze magnetic properties dependent on mean particle size. Structural analysis was conducted using X-ray Powder Diffraction. The composition was determined through X-ray Photoelectron Spectroscopy, while topographical features were scrutinized employing Scanning Electron Microscopy. Magnetic properties were evaluated employing a Vibrating Sample Magnetometer, and the magneto-thermal characteristics were delineated using an Alternating Magnetic Field hyperthermia system. Notably, this study marks the pioneering identification of La1−xSrxMnO3 as a viable material candidate for auto-regulated hyperthermia, based on its magnetization range (5–20 emu/g) and Curie temperature span (287–357 K) that are changing with the mean particle size. Through comprehensive analysis, we thoroughly investigated its hyperthermia attributes, thereby contributing significant insights to the existing literature.

Development of Intratumoral Drug Delivery Based Strategies for Antitumor Therapy.

Research for tumor treatment with significant therapy effects and minimal side-effects has been widely carried over the past few decades. Different drug forms have received a lot of attention. However, systemic biodistribution induces efficacy and safety issues. Intratumoral delivery of agents might overcome these problems because of its abundant tumor accumulation and retention, thereby reducing side effects. Delivering hydrogels, nanoparticles, microneedles, and microspheres drug carriers directly to tumors can realize not only targeted tumor therapy but also low side-effects. Furthermore, intratumoral administration has been integrated with treatment strategies such as chemotherapy, enhancing radiotherapy, immunotherapy, phototherapy, magnetic fluid hyperthermia, and multimodal therapy. Some of these strategies are ongoing clinical trials or applied clinically. However, many barriers hinder it from being an ideal and widely used option, such as decreased drug penetration impeded by collagen fibers of a tumor, drug squeezed out by high density and high pressure, mature intratumoral injection technique. In this review, we systematically discuss intratumoral delivery of different drug carriers and current development of intratumoral therapy strategies.

Pharmaceutical Quality by Design Approach to Develop High-Performance Nanoparticles for Magnetic Hyperthermia.

Magnetic hyperthermia holds significant therapeutic potential, yet its clinical adoption faces challenges. One obstacle is the large-scale synthesis of high-quality superparamagnetic iron oxide nanoparticles (SPIONs) required for inducing hyperthermia. Robust and scalable manufacturing would ensure control over the key quality attributes of SPIONs, and facilitate clinical translation and regulatory approval. Therefore, we implemented a risk-based pharmaceutical quality by design (QbD) approach for SPION production using flame spray pyrolysis (FSP), a scalable technique with excellent batch-to-batch consistency. A design of experiments method enabled precise size control during manufacturing. Subsequent modeling linked the SPION size (6-30 nm) and composition to intrinsic loss power (ILP), a measure of hyperthermia performance. FSP successfully fine-tuned the SPION composition with dopants (Zn, Mn, Mg), at various concentrations. Hyperthermia performance showed a strong nonlinear relationship with SPION size and composition. Moreover, the ILP demonstrated a stronger correlation to coercivity and remanence than to the saturation magnetization of SPIONs. The optimal operating space identified the midsized (15-18 nm) Mn0.25Fe2.75O4 as the most promising nanoparticle for hyperthermia. The production of these nanoparticles on a pilot scale showed the feasibility of large-scale manufacturing, and cytotoxicity investigations in multiple cell lines confirmed their biocompatibility. In vitro hyperthermia studies with Caco-2 cells revealed that Mn0.25Fe2.75O4 nanoparticles induced 80% greater cell death than undoped SPIONs. The systematic QbD approach developed here incorporates process robustness, scalability, and predictability, thus, supporting the clinical translation of high-performance SPIONs for magnetic hyperthermia.

Tailoring the Magnetic and Hyperthermic Properties of Biphase Iron Oxide Nanocubes through Post-Annealing

Tailoring the magnetic properties of iron oxide nanosystems is essential to expanding their biomedical applications. In this study, 34 nm iron oxide nanocubes with two phases consisting of Fe3O4 and α-Fe2O3 were annealed for 2 h in the presence of O2, N2, He, and Ar to tune the respective phase volume fractions and control their magnetic properties. X-ray diffraction and magnetic measurements were carried out post-treatment to evaluate changes in the treated samples compared to the as-prepared samples, showing an enhancement of the α-Fe2O3 phase in the samples annealed with O2 while the others indicated a Fe3O4 enhancement. Furthermore, the latter samples indicated enhancements in crystallinity and saturation magnetization, while coercivity enhancements were the most significant in samples annealed with O2, resulting in the highest specific absorption rates (of up to 1000 W/g) in all the applied fields of 800, 600, and 400 Oe in agar during magnetic hyperthermia measurements. The general enhancement of the specific absorption rate post-annealing underscores the importance of the annealing atmosphere in the enhancement of the magnetic and structural properties of nanostructures.

Flame spray pyrolyzed carbon-encapsulated Au/Fe3O4 nanoaggregates enabled efficient photothermal therapy and magnetic hyperthermia of esophageal cancer cells.

Multifunctional magneto-plasmonic nanoparticles with magnetic hyperthermia and photothermal therapy could kill cancer cells efficiently. Herein, carbon-encapsulated Au/Fe3O4 (Au/Fe3O4@C) was fabricated using an enclosed flame spray pyrolysis. The nanostructures, including an Fe3O4 core (51.9-55.2nm) with a decreasing carbon shell thickness and an Au core (4.68-8.75nm) coated with 2-4 graphite layers, were tailored by tuning the C2H4 content in the reacting gas mixture. Saturation magnetization (33.7-48.2emu/g) and optical absorption were determined. The carbon shell facilitated the dispersion of Au/Fe3O4 and restrained their laser-induced and magnetic field-induced coalescence and growth. Au/Fe3O4@C exhibited excellent magnetic resonance imaging capability (91.4mM-1 s-1) and photothermal performance (65.4°C for 0.8mg/mL Au/Fe3O4@C at a power density of 1.0W/cm2 after 300s near-IR laser irradiation (808nm)). Moreover, the combined application of photothermal and magnetic-heating properties reduced the required intensity of both laser and magnetic field compared to the intensity of separate situations. Our work provides a unique, intriguing approach to preparing multicomponent core/shell nanoaggregates that are promising candidates for esophageal cancer cell therapy.

Sensitivity of colorectal cancer organoids to hyperthermic intraperitoneal chemotherapy with lobaplatin

Objective: To investigate the sensitivity of tumor organoids derived from samples of colorectal cancer to lobaplatin and oxaliplatin hyperthermic perfusion in vitro and to assist clinical development of hyperthermic intraperitoneal chemotherapy. Method: Tumor samples and relevant clinical data were collected from patients with pathologically confirmed colorectal cancer in the Sixth Affiliated Hospital of Sun Yat-sen University from July 2021 to December 2022. Organoids were cultured and tumor tissue were passaged. In vitro hyperthermic perfusion experiments were performed on organoids with good viability. Firstly, 10 organoids were treated with oxaliplatin and lobaplatin at the following six concentrations: 1 000, 250, 62.5, 15.6, 3.9, and 0.98 μmol/L. The organoids were exposed to oxaliplatin at 42℃ for 30 minutes and to lobaplatin at 42℃ for 60 minutes. Dose-response curves of responses to in vitro hyperthermic perfusion with these two drugs were constructed and evaluated. Clinical doses of oxaliplatin and lobaplatin were further tested on 30 organoids. This testing revealed oxaliplatin was effective at 579 µmol/L at a hyperthermic perfusion temperature of 42℃ for 30 min and lobaplatin was effective at 240 µmol/L at a hyperthermic perfusion temperature of 42℃ for 60 minutes. Result: Thirty-two tumor organoids were cultured from samples of colorectal cancer. The median concentration required for oxaliplatin to eliminate 50% of tumor cells (IC50) was 577.45 µmol/L (IQR: 1846.09 µmol/L). The median IC50 for lobaplatin was 85.04 µmol/L (IQR: 305.01 µmol/L).The difference between the two groups was not statistically significant (Z=1.784, P=0.084). In seven of 10 organoids, lobaplatin showed a greater IC50 after in vitro hyperthermic perfusion than did oxaliplatin. Testing of 30 organoids with clinical doses of oxaliplatin and lobaplatin revealed that oxaliplatin achieved an average inhibition rate of 39.6% (95%CI: 32.1%‒47.0%), whereas the average rate of inhibition for lobaplatin was 89.7% (95%CI: 87.0%‒92.3%): this difference is statistically significant (t=‒15.282, P<0.001). Conclusion: The rate of inhibition achieved by hyperthermic perfusion of lobaplatin in vitro is better than that achieved by hyperthermic perfusion with oxaliplatin. Lobaplatin is more effective than oxaliplatin when administered by hyperthermic intraperitoneal perfusion and therefore has the potential to replace oxaliplatin in this setting.

Facilitated cell probing and hyperthermia treatment by fluorescent DNA engineered cobalt ferrite nanoparticles

BackgroundProbing a cell by fluorescence imaging is very convenient. We have observed that tagging of DNA with some organic dye molecules enhances fluorescence properties. This property of DNA can be utilised to enhance cell imaging quality to track the cell in better way for diagnosis as well as therapy. ResultsWe have shown internalisation of DNA functionalized cobalt-ferrite nanoparticles (CF-DNA NPs) with cells is better compared to free cobalt-ferrite nanoparticles (CF NPs). Therefore, CF NPs were functionalized by DNA (CF-DNA) and tagged them with a fluorophore like RITC for improvement of cell tracking by fluorescence imaging. Cell imaging and cytotoxicity effects were compared by treating the human mammary carcinoma cells (MDA MB-231) with CF NPs and CF-DNA NPs. An investigation was made on applicability of hyperthermia therapy for these particles under AC magnetic field. SignificancesA significant enhancement in fluorescence contrast of cancer cells was observed in case of CF-DNA NPs compared to CF NPs and both the particles show less cytotoxic effect for normal cells. A significant cell death and change in cell morphology after hyperthermia treatment was observed by phase contrast microscope and scanning electron microscope (SEM). Monitoring the treatment in a selective region is helped by this technique with the use of a very small quantity of theranostic material. This new treatment protocol may open a new avenue in cancer therapy.

Synthesis of Cu0.5Zn0.5-xNixFe2O4 nanoparticles as heating agents for possible cancer treatment

Magnetic mixed ferrites with high heating efficacy have attracted lots of attention as a complementary method for cancer treatment via magnetic hyperthermia therapy. In the present study, magnetic Cu0.5Zn0.5-xNixFe2O4 nanoparticles were synthesized via a sol–gel combustion method. The effects of nickel substitution (x = 0.1, 0.2, 0.3, 0.4 and 0.5) on the magnetic and structural properties of the produced nanoparticles were investigated. The produced magnetic nanopowders were studied via X-ray diffraction (XRD), scanning electron microscopy (SEM), simultaneous thermal analysis (STA), Fourier-transform infrared spectroscopy (FTIR), Transmission electron microscopy (TEM), and vibrating-sample magnetometry (VSM) techniques. The results showed that the saturation magnetization and coercivity of ZnCuFe2O4 nanoparticles were strongly affected by nickel substitution in the structure so that saturation magnetization decreased from 55.4 emu/g to 36.0 emu/g, whereas coercivity increased from 87.9 Oe to 156.4 Oe. In addition, saturation magnetization for the Cu0.5Zn0.4Ni0.1Fe2O4 sample increases from 55 to 58.1 emu/g with a rise in calcination temperature from 400 to 700 °C, respectively. The heating efficiency of the samples was investigated under different magnetic fields for magnetic hyperthermia therapy. The Cu0.5Zn0.4Ni0.1Fe2O4 sample exhibits a temperature increase from 37 °C to 49.5 °C during 10 min in the exposure of a magnetic field of 400 Oe and frequency of 200 kHz. The specific absorption rate value calculated for the Cu0.5Zn0.5-xNixFe2O4 nanoparticles was 53.1 W/g. With the increase in the viscosity of the environment, the heating efficiency of nanoparticles is reduced. Despite this decrease, the magnetic characteristics of nanoparticles remained strong enough to envision their usage as heating agents in magnetic hyperthermia.

Efficient Strategy to Synthesize Tunable pH-Responsive Hybrid Micelles Based on Iron Oxide and Gold Nanoparticles.

The preparation of multifunctional nanomaterials based on inorganic nanoparticles with organic materials has emerged as a promising strategy for the development of new nanomedicines for in vitro and in vivo biomedical applications. Here, we synthesized pH-responsive hybrid inorganic micelles by combining a novel pH-responsive amphiphilic molecule with hydrophobic payloads. This amphiphile was synthesized in a one-pot reaction and self-assembled readily into micelles under acidic pH conditions. In the presence of hydrophobic NP payloads such as AuNPs or IONPs, the amphiphile self-organized around them through hydrophobic interactions, resulting in the formation of colloidally stable hybrid micelles. The size of the hydrophobic NPs determined the pH-response of the inorganic hybrid micelles, which is tuned from pH 7 to 11 for our pH-responsive amphiphilic molecule. This achievement represents a novel approach for the synthesis of tunable pH-responsive hybrid micelles based on inorganic NPs for biomedical imaging, hyperthermia treatment, and also drug delivery nanosystems.

Graphene oxide decorated with MnxCo1-xFe2O4 nanoparticles for highly efficiency magnetic hyperthermia

Based on the fact that tumor cells are more thermolabile and less oxygen resistant than normal cells, a novel minimally invasive tumor treatment modality, magnetic hyperthermia (MHT) is proposed. However, magnetic materials, which are necessities in MHT, are toxic to human tissue if they are excessively employed. Thus, magnetic materials with higher specific absorption rate (SAR) and intrinsic loss power (ILP) values becomes imperative to minimize their clinical application while mitigating damage to normal human tissues under identical treatment temperature conditions. In this study, the incorporation of soft magnetic MnFe2O4 into hard magnetic CoFe2O4 was introduced, leveraging the exchange coupling between these materials to enhance the magnetic saturation (Ms). Subsequently, we combined these magnetic nanomaterials with graphene oxide (GO) to establish an efficient heat conduction pathway, further augmenting the specific absorption rate (SAR) value of the resulting magnetic composites. Our findings reveal that the Mn0.5Co0.5Fe2O4-1%GO composite developed in this investigation boasts superior SAR values and intrinsic loss power (ILP) of 49.7 W/g and 5.90 nHm2/kg, respectively, when compared to other magnetic materials. The nanomaterials synthesized in this study have the potential to significantly enhance the effectiveness of tumor magnetothermal therapy.

Photodynamic therapy of leukoplakia of the oral mucosa: experience of using method in 223 patients

The aim of this study was to analyze the immediate and long-term results of using photodynamic therapy (PDT) in patients with leukoplakia of the oral mucosa. The retrospective study included 223 patients with morphologically verified leukoplakia of the oral mucosa. Patients received treatment at the hyperthermia and photodynamic therapy department from 2013 to 2023. The average age was 51.9±8.9 years. Clinically, 211 patients (94.6%) had a flat form of the disease, 12 patients (5.4%) had a verrucous form. The photosensitizer (PS), based on chlorin e6, was administered intravenously once in doses of 1.7 to 2.5 mg/kg body weight. Irradiation of pathologically changed lesions was carried out 2-2.5 hours after the end of its infusion, using a semiconductor laser device “UPL PDT”, with a wavelength λ=665±5 nm. The laser radiation dose density varied from 25 to 100 J/cm², the power density from 0.07 to 0.32 W/cm², the duration of one irradiation field - from 2 to 13.5 minutes, depending on its linear dimensions. The severity of adverse reactions was assessed on days 1-30 after treatment using the CTCAE 4.03 scale. The immediate results of treatment were assessed up to 3 months after PDT, with morphological confirmation of the response to treatment. No serious adverse reactions were observed during PS infusion and irradiation. No symptoms of dermal phototoxicity were reported. During control examinations, up to 3 months after irradiation in patients with flat and verrucous forms, the frequency of complete regressions was 97.1% (n=205) and 58.3% (n=6) cases, partial regressions - 2,9% (n=7) and 25% (n=3) of cases, respectively. Objective response rates were observed at 100% and 83.3%, respectively. The period of observation of patients varies from 3 to 120 months. (average 66 months). The frequency of disease relapses during this period was 9%. Patients with partial regression and identified relapse were treated with repeated PDT sessions. PDT is a well-tolerated and effective treatment method for patients with leukoplakia of the oral mucosa, which has significant advantages over traditional methods of treating this precancerous pathology. These include minimal toxicity to the normal tissues surrounding the pathological foci due to the selective accumulation of PS in leukoplakia tissues, a slight risk of serious adverse reactions, the possibility of an outpatient session, the possibility of repeated treatment over a large area of damage and good cosmetic results).

Numerical simulation of heat transfer and nanoparticle transport in a nanofluid within a tumour surrounding a blood vessel

A Newtonian nanofluid containing suspended nanoparticles can substantially improve heat transfer due to enhanced energy transport mechanisms. This theoretical study investigates heat and mass transfer in biological tissues using such a nanofluid under a magnetic field. These properties have promising medical and engineering applications. The nonlinear governing equations were transformed into ordinary differential equations using similarity variables and numerically solved with MATLAB boundary value problem solver bvp4c, subject to appropriate boundary conditions. Results demonstrated increasing the heat source parameter dramatically raised tumor interstitial temperature. This heating, along with improved nanoparticle accumulation within the tumor due to the thermal effects, are together essential for effective hyperthermia treatment. The model provides new insights into tuning heat and mass transport mechanisms in biological tissues via nanofluids for therapeutic applications. Therefore, the findings of this study may improve the efficacy of thermal therapy in treating cancer.

NIR-Responsive Methotrexate-Modified Iron Selenide Nanorods for Synergistic Magnetic Hyperthermic, Photothermal, and Chemodynamic Therapy.

Breast cancer is a malignant tumor with a high mortality rate among women. Therefore, it is necessary to develop novel therapies to effectively treat this disease. In this study, iron selenide nanorods (FeSe2 NRs) were designed for use in magnetic hyperthermic, photothermal, and chemodynamic therapy (MHT/PTT/CDT) for breast cancer. To illustrate their efficacy, FeSe2 NRs were modified with the chemotherapeutic agent methotrexate (MTX). MTX-modified FeSe2 (FeSe2-MTX) exhibited excellent controlled drug release properties. Fe2+ released from FeSe2 NRs induced the release of •OH from H2O2 via a Fenton/Fenton-like reaction, enhancing the efficacy of CDT. Under alternating magnetic field (AMF) stimulation and 808 nm laser irradiation, FeSe2-MTX exerted potent hyperthermic and photothermal effects by suppressing tumor growth in a breast cancer nude mouse model. In addition, FeSe2 NRs can be used for magnetic resonance imaging in vivo by incorporating their superparamagnetic characteristics into a single nanomaterial. Overall, we presented a novel technique for the precise delivery of functional nanosystems to tumors that can enhance the efficacy of breast cancer treatment.

Economic and Accessible Portable Homemade Magnetic Hyperthermia System: Influence of the Shape, Characteristics and Type of Nanoparticles in Its Effectiveness.

Currently, one of the main causes of death in the world is cancer; therefore, it is urgent to obtain a precocious diagnosis, as well as boost research and development of new potential treatments, which should be more efficient and much less invasive for the patient. Magnetic hyperthermia (MH) is an emerging cancer therapy using nanoparticles, which has proved to be effective when combined with chemotherapy, radiotherapy and/or surgery, or even by itself, depending on the type and location of the tumor's cells. This article presents the results obtained by using a previously developed economic homemade hyperthermia device with different types of magnetite nanoparticles, with sizes ranging between 12 ± 5 and 36 ± 11 nm and presenting different shapes (spherical and cubic particles). These magnetic nanoparticles (MNPs) were synthesized by three different methods (co-precipitation, solvothermal and hydrothermal processes), with their final form being naked, or possessing different kinds of covering layers (polyethylene glycol (PEG) or citric acid (CA)). The parameters used to characterize the heating by magnetic hyperthermia, namely the Specific Absorption Rate (SAR) and the intrinsic loss power (ILP), have been obtained by two different methods. Among other results, these experiments allowed for the determination of which synthesized MNPs showed the best performance concerning hyperthermia. From the results, it may be concluded that, as expected, the shape of MNPs is an important factor, as well as the time that the MNPs can remain suspended in solution (which is directly related to the concentration and covering layer of the MNPs). The MNPs that gave the best results in terms of the SAR were the cubic particles covered with PEG, while in terms of total heating the spherical particles covered with citric acid proved to be better.

Effect of heavy Dy3+ doping on the magnetic, structural, morphological, and optical characteristics of CuDyxFe2-xO4 nanoparticles

The present study explored the impacts of dysprosium (Dy³⁺) doping on the structure, optical, and magnetic characteristics of CuDyxFe2-xO4 nanospinel ferrites synthesized via a hydrothermal method. X-ray diffraction revealed a tetragonal spinel matrix with increasing Dy³⁺ content, accompanied by a secondary Dy2O3 phase at higher dopant levels for x ≥ 0.1. Crystallite size and microstrain increased with doping, while infrared spectroscopy confirmed the spinel structure and distinct vibrational modes. Interestingly, saturation magnetization displayed a non-monotonic trend, first rising due to spin polarization and cation redistribution, then decreasing with higher Dy³⁺ content attributable to the Dy2O3 phase and larger grains. Coercivity exhibited a maximum at x = 0.2, reflecting the interplay between magnetocrystalline anisotropy, canting angles, and domain wall pinning. These findings highlight the complex interplay between Dy³⁺ doping and the resulting properties, paving the way for tailored CuDyxFe2-xO4 nanospinel ferrites functionalities. . Further research involving advanced techniques and targeted dopant levels holds promise for optimizing properties for diverse technological applications such as magnetic storage, microwave devices, sensors, and hyperthermia treatment.

Model predictive control (MPC) applied to a simplified model, magnetic nanoparticle hyperthermia (MNPH) treatment process

Magnetic nanoparticle hyperthermia (MNPH) has emerged as a promising cancer treatment that complements conventional ionizing radiation and chemotherapy. MNPH involves injecting iron-oxide nanoparticles into the tumor and exposing it to an alternating magnetic field (AMF). Iron oxide nanoparticles produce heat when exposed to radiofrequency AMF due to hysteresis loss. Minimizing the non-specific heating in human tissues caused by exposure to AMF is crucial. A pulse-width-modulated AMF has been shown to minimize eddy-current heating in superficial tissues. This project developed a control strategy based on a simplified mathematical model in MATLAB SIMULINK® to minimize eddy current heating while maintaining a therapeutic temperature in the tumor. A minimum tumor temperature of 43 [°C] is required for at least 30 [min] for effective hyperthermia, while maintaining the surrounding healthy tissues below 39 [°C]. A model predictive control (MPC) algorithm was used to reach the target temperature within approximately 100 [s]. As a constrained MPC approach, a maximum AMF amplitude of 36 [kA/m] and increment of 5 [kA/m/s] were applied. MPC utilized the AMF amplitude as an input and incorporated the open-loop response of the eddy current heating in its dynamic matrix. A conventional proportional integral (PI) controller was implemented and compared with the MPC performance. The results showed that MPC had a faster response (30 [s]) with minimal overshoot (1.4 [%]) than PI controller (115 [s] and 5.7 [%]) response. In addition, the MPC method performed better than the structured PI controller in its ability to handle constraints and changes in process parameters.

Magnetic nanoparticles in square-wave fields for breakthrough performance in hyperthermia and magnetic particle imaging

Driving immobilized, single-domain magnetic nanoparticles at high frequency by square wave fields instead of sinusoidal waveforms leads to qualitative and quantitative improvements in their performance both as point-like heat sources for magnetic hyperthermia and as sensing elements in frequency-resolved techniques such as magnetic particle imaging and magnetic particle spectroscopy. The time evolution and the frequency spectrum of the cyclic magnetization of magnetite nanoparticles with random easy axes are obtained by means of a rate-equation method able to describe time-dependent effects for the particle sizes and frequencies of interest in most applications to biomedicine. In the presence of a high-frequency square-wave field, the rate equations are shown to admit an analytical solution and the periodic magnetization can be therefore described with accuracy, allowing one to single out effects which take place on different timescales. Magnetic hysteresis effects arising from the specific features of the square-wave driving field results in a breakthrough improvement of both the magnetic power released as heat to an environment in magnetic hyperthermia treatments and the magnitude of the third harmonic of the frequency spectrum of the magnetization, which plays a central role in magnetic particle imaging.

Multicore iron oxide nanoparticles for magnetic hyperthermia and combination therapy against cancer cells

HypothesisMulticore flower-like iron oxide nanoparticles (IONPs) are among the best candidates for magnetic hyperthermia applications against cancers. However, they are rarely investigated in physiological environments and their efficacy against cancer cells has been even less studied. The combination of magnetic hyperthermia, using multicore IONPs, with selected bioactive molecules should lead to an enhanced activity against cancer cells. ExperimentsMulticore IONPs were synthesized by a seeded-growth thermal decomposition approach. Then, the cytotoxicity, cell uptake, and efficacy of the magnetic hyperthermia approach were studied with six cancer cell lines: PANC1 (pancreatic carcinoma), Mel202 (uveal melanoma), MCF7 (breast adenocarcinoma), MB231 (triple-negative breast cancer line), A549 (lung cancer), and HCT116 (colon cancer). Finally, IONPs were modified with a chemotherapeutic drug (SN38) and tumor suppressor microRNAs (miR-34a, miR-182, let-7b, and miR-137), to study their activity against cancer cells with and without combination with magnetic hyperthermia. FindingsTwo types of multicore IONPs with very good heating abilities under magnetic stimulation have been prepared. Their concentration-dependent cytotoxicity and internalization have been established, showing a strong dependence on the cell line and the nanoparticle type. Magnetic hyperthermia causes significant cell death that is dramatically enhanced in combination with the bioactive molecules.

Nanoarchitectonic Engineering of Thermal-Responsive Magnetic Nanorobot Collectives for Intracranial Aneurysm Therapy.

Stent-assisted coiling is a main treatment modality for intracranial aneurysms (IAs) in clinics, but critical challenges remain to be overcome, such as exogenous implant-induced stenosis and reliance on antiplatelet agents. Herein, an endovascular approach is reported for IA therapy without stent grafting or microcatheter shaping, enabled by active delivery of thrombin (Th) to target aneurysms using innovative phase-change material (PCM)-coated magnetite-thrombin (Fe3O4-Th@PCM) FTP nanorobots. The nanorobots are controlled by an integrated actuation system of dynamic torque-force hybrid magnetic fields. With robust intravascular navigation guided by real-time ultrasound imaging, nanorobotic collectives can effectively accumulate and retain in model aneurysms constructed in vivo, followed by controlled release of the encapsulated Th for rapid occlusion of the aneurysm upon melting the protective PCM (thermally responsive in a tunable manner) through focused magnetic hyperthermia. Complete and stable aneurysm embolization is confirmed by postoperative examination and 2-week postembolization follow-up using digital subtraction angiography (DSA), contrast-enhanced ultrasound (CEUS), and histological analysis. The safety of the embolization therapy is assessed through biocompatibility evaluation and histopathology assays. This strategy, seamlessly integrating secure drug packaging, agile magnetic actuation, and clinical interventional imaging, avoids possible exogenous implant rejection, circumvents cumbersome microcatheter shaping, and offers a promising option for IA therapy.

Effect of moringa oleifera with pure and Zn-doped Mn and Ni nanoferrites for hyperthermia applications

Nanoferrites like spinel manganese ferrite (MnFe2O4) and inverse spinel nickel ferrite (NiFe2O4) have an efficient heating deportment to the destruction of neoplasm. The incorporation of Moringa oleifera (MO) leaf extracts with magnetic nanoparticles as heat mediators is an effective approach for treating magnetic hyperthermia. This study investigated the potential heating behavior of bare, Zn-doped MnFe2O4 and NiFe2O4 nanoparticles (NPs) with Moringa oleifera leaf extracts as magnetic hyperthermia agents. High-resolution transmission electron microscopy showed the spherical-like morphology of MnFe2O4 NPs with no impurities in the EDX spectra. X-ray diffraction spectra confirmed the cubic spinel and inverse spinel structure for MnFe2O4 and NiFe2O4 NPs, respectively. Magnetic properties of the prepared nanoferrites exhibit low coercivity values (in the range of 13–18 Oe representing superparamagnetic behavior. Further, the binding energies of the prepared nanoferrites were revealed by X-ray photoelectron spectroscopy. The effective magnetic anisotropy constant (Keff) was calculated to be around 3.9–5.9 kJ/m3 by electron spin resonance. An increased specific surface area (120.69 m2/g) and wider porosity (17.053 nm) were observed for MnFe2O4/MO NPs through Brunauer-Emmett-Teller (BET) analysis. Thermal properties were investigated by measuring the effective specific absorption rate in an alternating magnetic field ranging from 23 to 31 * 10−9 W/g Oe2 Hz. Results indicated that the green synthesized MnFe2O4/MO NPs are promising agents for magnetic hyperthermia applications in cancer therapy.