Hydroxypropyl Methylcellulose Acetate Succinate Research Articles

Intestinal distribution of anionic, cationic, and neutral polymer-stabilized nanocarriers measured with a lanthanide (europium) tracer assay

Nanocarriers, more commonly called nanoparticles (NPs), have found increasing use as delivery vehicles which increase the oral bioavailability of poorly water-soluble and peptide therapeutics. Therapeutic bioavailability is commonly assessed by measuring plasma concentrations that reflect the absorption kinetics. This bioavailability is a convolution of the gastrointestinal distribution of the NP vehicle, the release rate of the encapsulated therapeutic cargo, and the absorption-metabolism-distribution kinetics of the released therapeutic. The spatiotemporal distribution of the NP vehicle in the gastrointestinal tract is not well studied and is a buried parameter in PK studies used to measure the effectiveness of an NP formulation. This work is a study of the intestinal distribution and fate of orally dosed NPs in male CD-1 mice over 24 h. NPs have identical hydrophobic cores – composed of poly(styrene) homopolymer, a naphthalocyanine dye, and oleate-coated europium oxide colloids – with one of four different surface stabilizers: neutral poly(styrene)-block-poly(ethylene glycol) (PS-b-PEG), moderately negative hydroxypropyl methylcellulose acetate succinate (HPMCAS), highly negative poly(styrene)-block-poly(acrylic acid) (PS-b-PAA), and highly cationic adsorbed chitosan HCl on PS-b-PAA stabilized NPs. NP hydrodynamic diameters are all below 200 nm, with some variation attributable to the molecular properties of the stabilizing polymer. The encapsulated hydrophobic europium oxide colloids do not release soluble europium ions, enabling the use of highly sensitive inductively coupled plasma mass spectrometry (ICP-MS) to detect NP concentrations in digested biological tissues.Highly anionically-charged PAA and cationically-charged chitosan stabilized NPs showed statistically significant increased retention compared to the neutral PEG-stabilized NPs at p < 0.05 significance and (1-β) > 0.95 power. HPMCAS-stabilized NPs showed statistically insignificant greater retention than PEG-stabilized NPs, and all NP formulations showed clearance from the intestines within 24 h. Different surface charges preferentially reside in different segments of the intestines, where cationic chitosan-stabilized NPs showed increased retention in the small intestines (ileum) and anionic PAA-stabilized NPs in the large intestines (caecum and colon). Modifying the surface charge of a NP can be used to modulate mucoadhesion, total retention, and intestinal segment specific retention, which enables the rational design of delivery vehicles that maximize residence times in appropriate locations.

Time and Temperature Dependence of Drug Crystallization─The Role of Molecular Mobility.

Using the time-temperature-transformation diagrams, we demonstrated a correlation between molecular mobility and crystallization in amorphous solid dispersions of nifedipine (NIF) with each polyvinylpyrrolidone vinyl acetate (PVPVA64) and polyvinyl caprolactam polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus). The behavior was compared with the NIF dispersions prepared with each polyvinylpyrrolidone (PVP) and hydroxypropyl methylcellulose acetate succinate (HPMCAS) [Lalge et al., Mol. Pharmaceutics 2023, 20(3), 1806-1817]. Each system was characterized by a unique temperature at which the crystallization onset time was the shortest. Below this temperature, a coupling was observed between the α-relaxation time determined by dielectric spectroscopy and crystallization onset time. Above this temperature, the activation barrier for crystallization had a more significant role than molecular mobility. In the solid state, PVP and PVPVA64 dispersion exhibited higher resistance to crystallization than HPMCAS and Soluplus. The role of polymers in inhibiting crystal growth in nucleated systems was discerned by monitoring crystallization following wetting of the amorphous dispersion with the dissolution medium. PVPVA64 and Soluplus dispersions exhibited higher resistance to crystal growth than PVP and HPMCAS.

Amorphous Solid Dispersion Formation for Enhanced Release Performance of Racemic and Enantiopure Praziquantel.

Praziquantel (PZQ) is the treatment of choice for schistosomiasis, which affects more than 250 million people globally. Commercial tablets contain the crystalline racemic compound (RS-PZQ) which limits drug dissolution and oral bioavailability and can lead to unwanted side effects and poor patient compliance due to the presence of the S-enantiomer. While many approaches have been explored for improving PZQ's dissolution and oral bioavailability, studies focusing on investigating its release from amorphous solid dispersions (ASDs) have been limited. In this work, nucleation induction time experiments were performed to identify suitable polymers for preparing ASDs using RS-PZQ and R-PZQ, the therapeutically active enantiomer. Cellulose-based polymers, hydroxypropyl methylcellulose acetate succinate (HPMCAS, MF grade) and hydroxypropyl methylcellulose (HPMC, E5 LV grade), were the best crystallization inhibitors for RS-PZQ in aqueous media and were selected for ASD preparation using solvent evaporation (SE) and hot-melt extrusion (HME). ASDs prepared experimentally were subjected to X-ray powder diffraction to verify their amorphous nature and a selected number of ASDs were monitored and found to remain physically stable following several months of storage under accelerated-stability testing conditions. SE HPMCAS-MF ASDs of RS-PZQ and R-PZQ showed faster release than HPMC E5 LV ASDs and maintained good performance with an increase in drug loading (DL). HME ASDs of RS-PZQ formulated using HPMCAS-MF exhibited slightly enhanced release compared to that of SE ASDs. SE HPMCAS-MF ASDs showed a maximum release increase of the order of 6 times compared to generic and branded (Biltricide) PZQ tablets. More importantly, SE R-PZQ ASDs with HPMCAS-MF released the drug as effectively as RS-PZQ or better, depending on the DL used. These findings have significant implications for the development of commercial PZQ formulations comprised solely of the R-enantiomer, which can result in mitigation of the biopharmaceutical and compliance issues associated with current commercial tablets.

Exploring biorelevant conditions and release profiles of ritonavir from HPMCAS-based amorphous solid dispersions

Development of a release test for amorphous solid dispersions (ASDs) that is in vivo predictive is essential to identify optimally performing formulations early in development. For ASDs containing an enteric polymer, consideration of buffer properties is essential. Herein, release rates of hydroxypropyl methyl cellulose acetate succinate (HPMCAS) and ritonavir from ASDs with a 20% drug loading were compared in phosphate and bicarbonate buffers with different molarities, at pH 6.5. The bioaccessibility of ritonavir from the ASD in the tiny-TIM apparatus was also evaluated and compared to that of the crystalline drug. The surface pH at the dissolving solid: solution interface was evaluated using a pH-sensitive fluorescence probe for HPMCAS and ASD compacts in phosphate and bicarbonate buffers. Drug and polymer were found to release congruently in all buffer systems, indicating that the polymer controlled the drug release. Release was slowest in 10 mM bicarbonate buffer, and much faster in phosphate buffers with molarities typically used in release testing (20-50 mM). Release from the 10 mM bicarbonate buffer was matched in a 5 mM phosphate buffer. The surface pH of HPMCAS and HPMCAS:ritonavir ASDs was found to be lower than the bulk solution pH, where surface pH differences largely explained release rate differences seen in the different buffer systems. Ritonavir was highly bioaccessible from the ASD, as assessed by the tiny-TIM system, and much less bioaccessible when crystalline drug was used. The observations highlight the need for continued development of biorelevant assays tailored for ASD formulation assessment.

Development of biopolymer films loaded with fluconazole and thymol for resistant vaginal candidiasis

Vulvovaginal candidiasis (VVC) is an opportunistic infection caused by a fungus of the Candida genus, affecting approximately 75 % of women during their lifetime. Fungal resistance cases and adverse effects have been the main challenges of oral therapies. In this study, the topical application of thin films containing fluconazole (FLU) and thymol (THY) was proposed to overcome these problems. Vaginal films based only on chitosan (CH) or combining this biopolymer with pectin (PEC) or hydroxypropylmethylcellulose acetate succinate (HPMCAS) were developed by the solvent casting method. In addition to a higher swelling index, CH/HPMCAS films showed to be more plastic and flexible than systems prepared with CH/PEC or only chitosan. Biopolymers and FLU were found in an amorphous state, contributing to explaining the rapid gel formation after contact with vaginal fluid. High permeability rates of FLU were also found after its immobilization into thin films. The presence of THY in polymer films increased the distribution of FLU in vaginal tissues and resulted in improved anti-Candida activity. A significant activity against the resistant C. glabrata was achieved, reducing the required FLU dose by 50 %. These results suggest that the developed polymer films represent a promising alternative for the treatment of resistant vulvovaginal candidiasis, encouraging further studies in this context.

Generality of Enhancing the Dissolution Rates of Free Acid Amorphous Solid Dispersions by the Incorporation of Sodium Hydroxide.

The incorporation of a counterion into an amorphous solid dispersion (ASD) has been proven to be an attractive strategy to improve the drug dissolution rate. In this work, the generality of enhancing the dissolution rates of free acid ASDs by incorporating sodium hydroxide (NaOH) was studied by surface-area-normalized dissolution. A set of diverse drug molecules, two common polymer carriers (copovidone or PVPVA and hydroxypropyl methylcellulose acetate succinate or HPMCAS), and two sample preparation methods (rotary evaporation and spray drying) were investigated. When PVPVA was used as the polymer carrier for the drugs in this study, enhancements of dissolution rates from 7 to 78 times were observed by the incorporation of NaOH into the ASDs at a 1:1 molar ratio with respect to the drug. The drugs having lower amorphous solubilities showed greater enhancement ratios, providing a promising path to improve the drug release performance from their ASDs. Samples generated by rotary evaporation and spray drying demonstrated comparable dissolution rates and enhancements when NaOH was added, establishing a theoretical foundation to bridge the ASD dissolution performance for samples prepared by different solvent-removal processes. In the comparison of polymer carriers, when HPMCAS was applied in the selected system (indomethacin ASD), a dissolution rate enhancement of 2.7 times by the incorporated NaOH was observed, significantly lower than the enhancement of 53 times from the PVPVA-based ASD. This was attributed to the combination of a lower dissolution rate of HPMCAS and the competition for NaOH between IMC and HPMCAS. By studying the generality of enhancing ASD dissolution rates by the incorporation of counterions, this study provides valuable insights into further improving drug release from ASD formulations of poorly water-soluble drugs.

Synergistic effect of polymers in stabilizing amorphous pretomanid through high drug loaded amorphous solid dispersion.

Pretomanid (PTM), an oral antibiotic used in the treatment of adults with pulmonary extensively drug-resistant, nonresponsive multidrug-resistant tuberculosis (MDR-TB). It is a poor glass former, that shows high recrystallization tendency from the amorphous and supersaturated state, resulting in low aqueous solubility and suboptimal absorption through the gastrointestinal tract. The present investigation aimed to develop high drug loaded ternary amorphous solid dispersions (ASDs) of PTM with improved stability and enhanced biopharmaceutical performance by utilizing a combination of polymers. The polymers were comprehensively screened based on drug-polymer miscibility and saturation solubility analysis. A combination of Hydroxypropyl Methylcellulose Acetate Succinate (HPMCAS-HF) and Polyvinylpyrrolidone K-30 (PVP K-30) showed synergism in drug-polymer miscibility as evidenced through pronounced depression in the melting endotherm of PTM. The Powder X-ray Diffraction (P-XRD) diffractograms of 30% w/w PTM loaded ternary ASDs displayed the halo pattern, contrary to the binary ASDs. Drug-polymer interactions (hydrophobic forces) involved between PTM and polymers were detected through Fourier Transform Infrared Spectroscopy (FT-IR) and Nuclear Magnetic Resonance Spectroscopy (13C-NMR) which contributed to the synergistic enhancement in solubility and dissolution of ternary ASDs with sustained release over 12h. Ternary ASDs demonstrated better in-vivo performance compared to the binary ASDs, showing a 4.63-fold increase in maximum plasma concentration. All ASDs remained stable and resisted phase separation during short-term stability studies for 3 months at ambient conditions. It was concluded that the hydrophobic and hydrophilic polymeric combination (HPMCAS-HF and PVP K-30, respectively) effectively prevented the crystallization and ensured sustained drug release with improved in-vivo absorption of PTM.

Development of hydroxypropylmethylcellulose acetate succinate and kappa carrageenan films loaded with curcumin for wound healing

Curcumin (CUR) has demonstrated significant anti-inflammatory and antimicrobial activity, which has motivated its use in wound healing. Films have shown to be promising systems as they can provide a sustained release, reducing the number of applications and microbial resistance problems. In this new study, CUR-loaded films presenting different proportions of k-carrageenan (κ-CAR) and hydroxypropylmethylcellulose succinate acetate (HPMCAS) were prepared by the solvent casting method. The use of polymer combinations allows for more precise adjustment of release profile and mechanical properties. FTIR and thermal analyses suggested strong chemical interactions between these polymers, which contributed to explaining the improved mechanical properties, such as high values of elastic modulus, of the films. The amorphous state of the materials and the formation of pores in the internal structure of the matrix, as evidenced by SEM analysis, would enhance the penetration of wound exudate, leading to the consequent release of CUR. Moreover, a sustained CUR release and a local distribution in the human skin, with no systemic exposure and high retention in the epidermis, were found. The formulations also showed to be active against Staphylococcus aureus (MIC = 2000 mg L−1) and Pseudomonas aeruginosa (MIC = 2000 mg L−1), which are the two main pathogens found in wounds. Taken together, these results suggest that HPMCAS/κ-CAR films are promising systems for application in wound healing.

Enhanced dissolution of curcumin-resorcinol cocrystal by the inhibition effect of HPMCAS on solution-mediated phase transformation

The present study aimed to investigate the inhibition effect of polymers on the solution-mediated phase transformation (SMPT) of cocrystals during dissolution. Curcumin-resorcinol (CUR-RES) cocrystal was prepared by slow solvent evaporation, and the best precipitation inhibitor of curcumin (CUR) was selected from five polymers including hydroxypropyl methylcellulose acetate succinate (HPMCAS), hydroxypropyl methylcellulose (HPMC) E5, HPMC E50, Poloxamer 188 (P188) and polyethylene glycol (PEG) 6000 by solvent-shift precipitation test. Then non-sink dissolution tests and intrinsic dissolution rate (IDR) tests were performed with or without HPMCAS to explore the influence of HPMCAS on the dissolution of the cocrystal. It was showed that HPMCAS could effectively inhibit the crystallization of CUR so that the dissolved drug concentration in a predissolved 0.1 % HPMCAS solution at 2 h was nearly 15 μg/mL, which was at least 150 times higher than that without HPMCAS. The red CUR-RES cocrystal turned gradually to yellow CUR during the dissolution tests in the absence of HPMCAS, while the transformation was prevented in the presence of HPMCAS. The present work fully exploits the solubility advantages of CUR-RES cocrystal via the use of precipitation inhibitor and offers important insights into reducing the risk of SMPT during cocrystal dissolution, which is crucial for the development of pharmaceutical cocrystal formulations.

Development and Characterization of Enteric Polymer-based Solid Dispersion for Cholecalciferol Delivery

Background: The deficiency of vitamin D is a global concern affecting individuals of all age groups. Insufficient exposure to sunlight and disease conditions can lead to cholecalciferol (vitamin D3) deficiency. Objective: Cholecalciferol is a lipophilic crystalline molecule, and it is highly susceptible to degradation under environmental conditions, including light, temperature, and oxygen, and its degradation rate is high in the low pH range. Therefore, an enteric solid dispersion-based formulation was developed in the present study for the oral delivery of cholecalciferol. Method: Enteric polymer hydroxypropylmethylcellulose acetate succinate (HPMCAS)-based solid dispersion was developed and characterized by Fourier transform-infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and X-ray diffraction analysis. The effect of various concentrations of cholecalciferol formulations on the viability of Caco-2 cells was determined using an MTT assay. A dissolution and stability study of the product was also performed. Result: An amorphous form of cholecalciferol in the solid dispersion was reported. The drug content of solid dispersions was in the order of 90%. The viability assay indicated that the surfactant used in the developed solid dispersion of cholecalciferol had no cytotoxic effect on Caco-2 cells. A dissolution study on enteric solid dispersion in two-stage dissolution under a biomimetic medium indicated the pHdependent release of cholecalciferol from the HPMCAS-based solid dispersion. Moreover, the stability study showed no significant changes in the cholecalciferol content in the developed formulation under storage at experimental conditions. Conclusion: The enteric solid dispersion of cholecalciferol was developed, which exhibited compatibility with Caco-2 cells, improved dissolution, and acceptable stability profile, and represented a potential option for efficient delivery of cholecalciferol.

Isoconversional kinetic analysis of thermal decomposition of Bidirectionally stabilized amorphous formulation loading Vitamin D3 (Cholecalciferol) and Calcium Carbonate

Cholecalciferol, generally known as vitamin D3 (VD), and calcium (Ca2+) are very common dietary co-supplements in the pharmaceutical formulations, as they are symbiotically and pharmacologically dependent. Development of the VD/Ca2+ formulation is highly challenging due to stability and solubility issues, mainly for VD instability toward temperature, light, oxygen and pH. In this study, VD was loaded into carrier which consisted of amorphous calcium carbonate (ACC) and hydroxypropyl methylcellulose acetate succinate (HPMCAS), yielding amorphous VD/ACC/HPMCAS formulation with various composition ratios. The structural and thermal stability study of the formulations was conducted to find that VD was a promising molecule for the stabilization of ACC even with the trace amount (0.6 %). On the other hand, ACC stabilized the amorphous state of VD; thus, they had a bidirectional stabilizing effect. The amount of VD played a significant role in thermal stabilization of the VD/ACC/HPMCAS formulations, for which kinetic analysis was performed. Using isoconversional expanded Friedman's model (FRM) activation energies of decomposition of the organic part were determined as 190, 133, and 114 kJ mol−1 for VD/ACC/HPMCAS = 0.6/64.0/35.4, 2.3/56.8/40.9, and 4.9/52.6/42.5 formulations, respectively, revealing that the formulation with the highest amount of VD (4.9 %) was the least stable. The dissolution advantage for VD by amorphization was also demonstrated.

Drug-Polymer Nanodroplet Formation and Morphology Drive Solubility Enhancement of GDC-0810.

Nanodroplet formation is important to achieve supersaturation of active pharmaceutical ingredients (APIs) in an amorphous solid dispersion. The aim of the current study was to explore how polymer composition, architecture, molar mass, and surfactant concentration affect polymer-drug nanodroplet morphology with the breast cancer API, GDC-0810. The impact of nanodroplet size and morphology on dissolution efficacy and drug loading capacity was explored using polarized light microscopy, dynamic light scattering, and cryogenic transmission electron microscopy. Poly(N-isopropylacrylamide-stat-N,N-dimethylacrylamide) (PND) was synthesized as two linear derivatives and two bottlebrush derivatives with carboxylated or PEGylated end-groups. Hydroxypropyl methylcellulose acetate succinate grade MF (HPMCAS-MF) and poly(vinylpyrrolidone-co-vinyl acetate) (PVPVA) were included as commercial polymer controls. We report the first copolymerization synthesis of a PVPVA bottlebrush copolymer, which was the highest performing excipient in this study, maintaining 688 μg/mL GDC-0810 concentration at 60 wt % drug loading. This is likely due to strong polymer-drug noncovalent interactions and the compaction of GDC-0810 along the PVPVA bottlebrush backbone. Overall, it was observed that the most effective formulations had a hydrodynamic radius less than 25 nm with tightly compacted nanodroplet morphologies.

Concordance of vacuum compression molding with spray drying in screening of amorphous solid dispersions of itraconazole

Spray drying is a well-established method for screening spray dried dispersions (SDDs) but is material consuming, and the amorphous solid dispersions (ASDs) formed have low bulk density. Vacuum Compression Molding (VCM) is a potential method to avoid these limitations. This study focuses on VCM to screen ASDs containing itraconazole and L, M, or H polymer grades of hydroxypropyl methylcellulose acetate succinate (HPMCAS) and compares their morphology, amorphous stability, and dissolution performance with spray drying. Results indicate that VCM ASDs were comparable to SDDs. Both VCM ASDs and spray drying SDDs with HPMCAS-L and HPMCAS-M had improved dissolution profiles, while HPMCAS-H did not. Dynamic light scattering findings agreed with dissolution profiles, indicating that L and M grades produced monodisperse, smaller colloids, whereas H grade formed larger, polydisperse colloids. Capsules containing ASDs from VCM disintegrated and dissolved in the media; however, SDD capsules formed agglomerates and failed to disintegrate completely. Findings indicate that the VCM ASDs are comparable to SDDs in terms of dissolution performance and amorphous stability. VCM may be utilized in early ASD formulation development to select drug-polymer pairs for subsequent development.

Interplay of Drug-Polymer Interactions and Release Performance for HPMCAS-Based Amorphous Solid Dispersions.

The interplay between drug and polymer chemistry and its impact on drug release from an amorphous solid dispersion (ASD) is a relatively underexplored area. Herein, the release rates of several drugs of diverse chemistry from hydroxypropyl methylcellulose acetate succinate (HPMCAS)-based ASDs were explored using surface area normalized dissolution. The tendency of the drug to form an insoluble complex with HPMCAS was determined through coprecipitation experiments. The role of pH and the extent of drug ionization were probed to evaluate the role of electrostatic interactions in complex formation. Relationships between the extent of complexation and the drug release rate from an ASD were observed, whereby the drugs could be divided into two groups. Drugs with a low extent of insoluble complex formation with HPMCAS tended to be neutral or anionic and showed reasonable release at pH 6.8 even at higher drug loadings. Cationic drugs formed insoluble complexes with HPMCAS and showed poor release when formulated as an ASD. Thus, and somewhat counterintuitively, a weakly basic drug showed a reduced release rate from an ASD at a bulk solution pH where it was ionized, relative to when unionized. The opposite trend was observed in the absence of polymer for the neat amorphous drug. In conclusion, electrostatic interactions between HPMCAS and lipophilic cationic drugs led to insoluble complex formation, which in turn resulted in ASDs with poor release performance.

Development of Ternary Amorphous Solid Dispersions Manufactured by Hot-Melt Extrusion and Spray-Drying─Comparison of In Vitro and In Vivo Performance.

Producing amorphous solid dispersions (ASDs) by hot-melt extrusion (HME) is favorable from an economic and ecological perspective but also limited to thermostable active pharmaceutical ingredients (APIs). A potential technology shift from spray-drying to hot-melt extrusion at later stages of drug product development is a desirable goal, however bearing the risk of insufficient comparability of the in vitro and in vivo performance of the final dosage form. Hot-melt extrusion was performed using API/polymer/surfactant mixtures with hydroxypropyl methylcellulose acetate succinate (HPMCAS) as the polymer and evaluated regarding the extrudability of binary and ternary amorphous solid dispersions (ASDs). Additionally, spray-dried ASDs were produced, and solid-state properties were compared to the melt-extruded ASDs. Tablets were manufactured of a ternary ASD lead candidate comparing their in vitro dissolution and in vivo performance. The extrudability of HPMCAS was improved by adding a surfactant as plasticizer, thereby lowering the high melt-viscosity. d-α-Tocopheryl polyethylene glycol succinate (TPGS) as surfactant showed the most similar solid-state properties between spray-dried and extruded ASDs compared to those of poloxamer 188 and sodium dodecyl sulfate. The addition of TPGS, however, barely affected API/polymer interactions. The in vitro dissolution experiment and in vivo dog study revealed a higher drug release of tablets manufactured from the spray-dried ASD compared to the melt-extruded ASD; this was attributed to the different particle size. We could further demonstrate that the drug release can be controlled by adjusting the particle size of melt-extruded ASDs leading to a similar release profile compared to tablets containing the spray-dried dispersion, which confirmed the feasibility of a technology shift from spray-drying to HME upon drug product development.

Poly(vinylpyridine-co-vinylpyridine N-oxide) Excipients Mediate Rapid Dissolution and Sustained Supersaturation of Posaconazole Amorphous Solid Dispersions.

The chemical structure of excipients molecularly mixed in an amorphous solid dispersion (ASD) has a significant impact on properties of the ASD including dissolution behavior, physical stability, and bioavailability. Polymers used in ASDs require a balance between hydrophobic and hydrophilic functionalities to ensure rapid dissolution of the amorphous dispersion as well as sustained supersaturation of the drug in solution. This work demonstrates the use of postpolymerization functionalization of poly(vinylpyridine) excipients to elucidate the impact of polymer properties on the dissolution behavior of amorphous dispersions containing posaconazole. It was found that N-oxidation of pyridine functionalities increased the solubility of poly(vinylpyridine) derivatives in neutral aqueous conditions and allowed for nanoparticle formation which supplied posaconazole into solution at concentrations exceeding those achieved by more conventional excipients such as hydroxypropyl methylcellulose acetate succinate (HPMCAS) or Eudragit E PO. By leveraging these functional modifications of the parent poly(vinylpyridine) excipient to increase polymer hydrophilicity and minimize the effect of polymer on pH, a new polymeric excipient was optimized for rapid dissolution and supersaturation maintenance for a model compound.

Simultaneous Water Sorption and Crystallization in ASDs 1: Stability Studies Lasting for Two Years.

One way to increase the slow dissolution rate and the associated low bioavailability of newly developed active pharmaceutical ingredients (APIs) is to dissolve the API in a polymer, leading to a so-called amorphous solid dispersion (ASD). However, APIs are often supersaturated in ASDs and thus tend to crystallize during storage. The kinetics of the crystallization process is determined by the amount of water the ASD absorbs during storage at relative humidity (RH), storage temperature, polymer type, and the drug load of the ASD. Here, the crystallization kinetics and shelf life of spray-dried ASDs were investigated for ASDs consisting of nifedipine (NIF) or celecoxib (CCX) as the APIs and of poly(vinylpyrrolidone-co-vinyl acetate) or hydroxypropyl methylcellulose acetate succinate as polymers. Samples were stored over 2 years at different RHs covering conditions above and below the glass transition of the wet ASDs. Crystallization kinetics and onset time of the crystallization were qualitatively studied by using powder X-ray diffraction and microscopic inspection and were quantitatively determined by using differential scanning calorimetry. It was found that the NIF ASDs crystallize much faster than CCX ASDs at the same drug load and at the same storage conditions due to both higher supersaturation and higher molecular mobility in the NIF ASDs. Experimental data on crystallization kinetics were correlated using the Johnson-Mehl-Avrami-Kolmogorov equation. A detailed thermodynamic and kinetic modeling will be performed in Part 2 of this paper series.

Colon-targeted delivery of niclosamide from solid dispersion employing a pH-dependent polymer via hotmelt extrusion for the treatment of ulcerative colitis in mice

Niclosamide (NCL) is repurposed to treat inflammatory bowel disease due to its anti-inflammatory properties and potential to reduce oxidative stress. This therapeutic activity remains challenging if administered directly due to its low solubility and high recrystallization tendency in gastric pH. Solid dispersions using pH-dependent polymer will be a better idea to improve the solubility, dissolution and targeted delivery at the colon. Hot melt extrusion was used to formulate a solid dispersion with 30% NCL utilising hydroxypropyl methylcellulose acetate succinate as a pH-dependent polymer. In vitro drug release studies revealed formulation (F1) containing 10%w/w Tween 80 showed minimal release (2.06%) at the end of 2 h, followed by 47.87% and 82.15% drug release at 6 h and 14 h, respectively, indicating the maximum amount of drug release in the colon. The drug release from the formulations containing no plasticiser and 5%w/w plasticiser was comparable to the pure crystalline drug (approximately 25%). Solid-state analysis confirmed particle conversion of crystalline NCL to amorphous form, and the optimised formulation was stable for 6 months without significant changes in dissolution profile. In contrast to pure NCL, the F1 formulation substantially reduced the disease activity index, colonic inflammation, histological alterations and oxidative damage in colitis mice. These findings reveal that the prepared formulation can potentially deliver the drug locally at the colon, making it an effective tool in treating ulcerative colitis.

Comprehensive evaluation of polymer types and ratios in Spray-Dried Dispersions: Compaction, Dissolution, and physical stability

Amorphous solid dispersion (ASD) is a well-established strategy for enhancing the solubility and bioavailability of poorly soluble drugs. A significant portion of ASD products are in tablet form. However, the influence of common polymers and drug loading on the manufacturability of ASD tablets remains underexplored. This study focuses on investigating spray-dried ASDs from a tableting perspective by evaluating their physiochemical and mechanical properties. Itraconazole (ITZ) and indomethacin (IND), at the drug loadings ranging from 10% to 50%, were prepared with two polymers, hydroxypropyl methylcellulose acetate succinate (HPMCAS) and polyvinylpyrrolidone (PVP), serving as representative systems. Our findings revealed that increasing the drug loading resulted in a decreased surface area in ITZ-HPMCAS, IND-HPMCAS, and IND-PVP ASDs. However, this trend was not observed in ITZ-PVP dispersions, possibly due to the morphological disparities. Compaction results demonstrated that tabletability improved with decreasing drug loadings, except for ITZ-PVP dispersions. A partial least square analysis underscored particle surface area as the key factor influencing the tensile strength of ASD tablets. Additionally, our study disclosed that ITZ-PVP ASDs exhibited the worst release profiles and stability performance. The comprehensive journey from characterizing ASD particles to analyzing their compaction behavior and investigating drug release and physical stability offered profound insights into the attributes crucial for the downstream processing of amorphous pharmaceuticals.

Impact of Processing Methods on the Physico-chemical Properties of Posaconazole Amorphous Solid Dispersions.

Different methods have been exploited to generate amorphous solid dispersions (ASDs) of poorly water-soluble drugs. However, the impact of processing methods on drug stability and dissolution hasn't been studied extensively. The purpose of the current study is to investigate the impact of the two common ASD processing methods, hot-melt extrusion (HME) and spray drying, on the chemical/physical stability and supersaturation of Posaconazole (Posa) based ASDs. ASDs with 25% drug loading in hydroxypropylmethylcellulose acetate succinate were prepared using HME, and two types of spray dryers, a Procept Sprayer (ASD-Procept) and a Nano Sprayer (ASD-Nano). The relative physical stability of these ASDs upon exposure to heat and crystalline API seeding followed the order: ASD-Nano > ASD-Procept ≈HME. ASD-Procept and ASD-Nano showed similar chemical stability, slightly less stable than HME under 40°C/75%RH. All three ASDs demonstrated similar supersaturation induction times, and de-supersaturation kinetics with or without crystalline seeds. Posa ASDs prepared via spray drying were chemically less stable compared with HME, which can be attributed to their smaller particle size and hollow structure allowing oxygen penetration. For ASD-Procept and HME, the detailed phase changes involving recrystallization of amorphous Posa and a solid-solid phase transition from Posa Form I to Form Ia during the seed-induced studies were proposed. Similar dissolution and supersaturation-precipitation kinetics of three Posa ASDs indicated that any residual nanocrystals in the bulk ASDs were not enough to induce crystallization to differentiate ASDs made by three processing methods.