Hydrophilic Monolayers Research Articles

Novel thermoplastic microvalves based on an elastomeric cyclic olefin copolymer.

Microfluidic systems combine multiple processing steps and components to perform complex assays in an autonomous fashion. To enable the integration of several bio-analytical processing steps into a single system, valving is used as a component that directs fluids and controls introduction of sample and reagents. While elastomer polydimethylsiloxane has been the material of choice for valving, it does not scale well to accommodate disposable integrated systems where inexpensive and fast production is needed. As an alternative to polydimethylsiloxane, we introduce a membrane made of thermoplastic elastomeric cyclic olefin copolymer (eCOC), that displays unique attributes for the fabrication of reliable valving. The eCOC membrane can be extruded or injection molded to allow for high scale production of inexpensive valves. Normally hydrophobic, eCOC can be activated with UV/ozone to produce a stable hydrophilic monolayer. Valves are assembled following in situ UV/ozone activation of eCOC membrane and thermoplastic valve seat and bonded by lamination at room temperature. eCOC formed strong bonding with polycarbonate (PC) and polyethylene terephthalate glycol (PETG) able to hold high fluidic pressures of 75 kPa and 350 kPa, respectively. We characterized the eCOC valves with mechanical and pneumatic actuation and found the valves could be reproducibly actuated >50 times without failure. Finally, an integrated system with eCOC valves was employed to detect minimal residual disease (MRD) from a blood sample of a pediatric acute lymphoblastic leukemia (ALL) patient. The two module integrated system evaluated MRD by affinity-selecting CD19(+) cells and enumerating leukemia cells via immunophenotyping with ALL-specific markers.

Adaptive Adhesions of Barnacle-Inspired Adhesive Peptides.

The strategy of robust adhesion employed by barnacles renders them fascinating biomimetic candidates for developing novel wet adhesives. Particularly, barnacle cement protein 19k (cp19k) has been speculated to be the key adhesive protein establishing the priming layer in the initial barnacle cement construction. In this work, we systematically studied the sequence design rationale of cp19k by designing adhesive peptides inspired by the low-complexity STGA-rich and the charged segments of cp19k. Combining structure analysis and the adhesion performance test, we found that cp19k-inspired adhesive peptides possess excellent disparate adhesion strategies for both hydrophilic mica and hydrophobic self-assembled monolayer surfaces. Specifically, the low-complexity STGA-rich segment offers great structure flexibility for surface adhesion, while the hydrophobic and charged residues can contribute to the adhesion of the peptides on hydrophobic and charged surfaces. The adaptive adhesion strategy identified in this work broadens our understanding of barnacle adhesion mechanisms and offers valuable insights for designing advanced wet adhesives with exceptional performance on various types of surfaces.

Improving water transport through sub‐nanometer channels by alternating hydrophilic–hydrophobic patterns

AbstractHydrophilicity is key factor to sub‐nanometer channels for water transport. However, how to effectively integrate the respective advantages of hydrophilicity and hydrophobicity to realize ultrafast water transport at the sub‐nanometer scale is still confusing. By using sub‐nanometer channels formed by two‐dimensional covalent organic frameworks as typical models, we herein demonstrate that alternating hydrophilic–hydrophobic patterns in channels are capable of significantly improving water transport. Alternatingly stacking hydrophilic and hydrophobic monolayers is testified to be energetically favorable to directly piling their multilayers. Meanwhile, alternatingly‐stacked hydrophilic–hydrophobic multilayers are able to achieve much higher water permeability than individual hydrophilic or hydrophobic multilayers. The effect of framework flexibility is also investigated. The exceptional performances benefit from the perfect balance between excellent wettability of hydrophilicity and low friction of hydrophobicity. In order to give full play to the synergistic advantages, the thickness of hydrophobic patterns spaced by hydrophilic ones should be less than 1 nm.

Effect of Surface Hydrophobicity on the Adsorption of a Pilus-Derived Adhesin-like Peptide.

Bacterial colonization of abiotic surfaces such as those of medical implants, membrane filters, and everyday household items is a process of tremendous importance for public health. Bacteria use adhesive cell surface structures called adhesins to establish contact with abiotic surfaces. Among them, protein filaments called type IV pili are particularly important and found in many Gram-negative pathogens such as Pseudomonas aeruginosa. Understanding the interaction of such adhesin proteins with different abiotic surfaces at the molecular level thus represents a fundamental prerequisite for impeding bacterial colonization and preventing the spread of infectious diseases. In this work, we investigate the interaction of a synthetic adhesin-like peptide, PAK128-144ox, derived from the type IV pilus of P. aeruginosa with hydrophilic and hydrophobic self-assembled monolayers (SAMs). Using a combination of molecular dynamics (MD) simulations, quartz crystal microbalance with dissipation monitoring (QCM-D), and spectroscopic investigations, we find that PAK128-144ox has a higher affinity for hydrophobic than for hydrophilic surfaces. Additionally, PAK128-144ox adsorption on the hydrophobic SAM is furthermore accompanied by a strong increase in α-helix content. Our results show a clear influence of surface hydrophobicity and further indicate that PAK128-144ox adsorption on the hydrophobic surface is enthalpically favored, while on the hydrophilic surface, entropic contributions are more significant. However, our spectroscopic investigations also suggest aggregation of the peptide under the employed experimental conditions, which is not considered in the MD simulations and should be addressed in more detail in future studies.

Simulations of Friction Anisotropy on Self-Assembled Monolayers in Water.

Molecular dynamics simulations were performed to study nanoscale friction on hydrophilic and hydrophobic self-assembled monolayers (SAMs) immersed in water. Sliding was simulated in two different directions to capture anisotropy due to the direction of motion relative to the inherent tilted orientation of the molecules. It was shown that friction depends on both hydrophobicity and sliding direction, with the highest friction observed for sliding on hydrophobic SAM in the direction against the initial orientation of the molecules. The origins of the friction trends were analyzed by differentiating the tip-SAM and tip-water force contributions to friction. The tip-water force was higher on the hydrophilic SAM, and this was shown to be due to the presence of a dense layer of water adjacent to the surface and hydrogen bonding. In contrast, the tip-SAM force was higher on the hydrophobic SAM due to a water depletion layer, which enabled the tip to be closer to the SAM terminal group. The higher-friction cases all exhibited greater penetration of the tip below the surface of the SAM, accommodated by further tilting and reorientation of the SAM molecules.

The effect of magic number phosphine stabilised mono- and bimetallic Au, Cu and Au-Cu nanoparticles as catalysts in the reduction of 4-nitrophenol–A kinetic study

Phosphine stabilised mono- and bimetallic nanoparticles (NPs) of varying sizes were synthesised using a combined dendrimer encapsulated-monolayer protected cluster (DEN-MPC) method. According to this method, the NPs encapsulated within the dendrimer framework (DENs) are extracted using a ligand such as 1,3,5-triaza-7-phosphaadamantane (PTA), forming hydrophilic monolayer protected clusters (MPCs). The synthesis of MPCs with different average sizes (Aum, Cun, Aum–Cun and Au–Cu(m:n), where n = 55, 70, 95, 130 and 147 and m = 7, 13, 18, 31, 55) was achieved by varying the dendrimer to metal ratio. Various analytical techniques, including ultraviolet–visible (UV–Vis) spectroscopy, high-resolution transmission electron microscopy (HRTEM) and inductively coupled plasma optical electron spectroscopy (ICP-OES), were used to confirm the synthesis of the MPCs. The MPC were evaluated as catalysts in the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-Amp), using excess sodium borohydride (NaBH 4) as the reducing agent. The catalytic reaction was studied by monitoring the absorbance of the 4-nitrophenolate ions at 400 nm using UV–Vis spectroscopy. The average particle sizes of the MPCs ranged from 5–10 nm and were found to be active catalysts for the reduction of 4-NP. The Cun-PTA NPs exhibited a higher activity compared to the Aum-PTA NPs. However, they were not considered ideal catalysts due to their structural instability. The bimetallic Aum-Cun PTA NPs were more stable and displayed higher catalytic activity than the monometallic Aum NPs due to a synergistic effect between the Au NPs and Cu NPs; hence, the bimetallic NPs have proven to be the best catalysts for the reduction of 4-NP. The effect of various parameters, such as the concentration of NaBH4 and 4-NP, catalyst concentration, temperature and the average particle size, on the reaction rate was studied. In addition, the thermodynamic parameters relating to the reaction rate (Kapp) were also calculated and the kinetic data showed that the reduction of 4-NP to 4-Amp using PTA NPs follows the Langmuir–Hinshelwood model.

Changes in Human Erythrocyte Membrane Exposed to Aqueous and Ethanolic Extracts from Uncaria tomentosa.

Uncaria tomentosa (Willd.) DC is a woody climber species originating from South and Central America that has been used in the therapy of asthma, rheumatism, hypertension, and blood purification. Our previous study showed that U. tomentosa extracts altered human erythrocyte shape, which could be due to incorporation of the compounds contained in extracts into the erythrocyte membrane. The aim of the present study was to determine how the compounds contained in U. tomentosa extracts incorporate into the human erythrocyte membrane. The study has assessed the effect of aqueous and ethanolic extracts from leaves and bark of U. tomentosa on the osmotic resistance of the human erythrocyte, the viscosity of erythrocyte interior, and the fluidity of erythrocyte plasma membrane. Human erythrocytes were incubated with the studied extracts in the concentrations of 100, 250, and 500 µg/mL for 2, 5, and 24 h. All extracts tested caused a decrease in erythrocyte membrane fluidity and increased erythrocyte osmotic sensitivity. The ethanolic extracts from the bark and leaves increased viscosity of the erythrocytes. The largest changes in the studied parameters were observed in the cells incubated with bark ethanolic extract. We consider that the compounds from U. tomentosa extracts mainly build into the outer, hydrophilic monolayer of the erythrocyte membrane, thus protecting the erythrocytes against the adverse effects of oxidative stress.

Total Internal Reflection Tip-Enhanced Raman Spectroscopy of Cytochrome c.

Surface and tip-enhanced Raman spectroscopies in total internal reflection (TIR-SERS and TIR-TERS) are used to characterize the oxidation, spin, and ligation state of cytochrome c (Cc) molecules electrostatically bound on a hydrophilic thiol self-assembled monolayer. TIR-SERS spectra of this model hemoprotein show marker bands typical of the 6cLS ferric state of Cc. The performances of the TIR-TERS technique as a function of the incidence angle are described, showing in particular a significant electromagnetic enhancement of the Raman signal under p-polarized light excitation. TIR-TERS spectra of Cc confirm the 6cLS ferric state assignment deduced from TIR-SERS spectra, thus demonstrating the possibility of probing with nanoscale spatial resolution the 6cLS oxidized form of Cc that is potentially implicated in cell apoptotic processes. The minimal far-field contribution of the sample in TIR-TERS also offers promising perspectives for future nanoscale chemical characterizations of photosensitive biomolecules in complex biological media.

Nanoscale Friction of Hydrophilic and Hydrophobic Self-Assembled Monolayers in Water

Self-assembled monolayers (SAMs) can reduce friction in boundary lubricated contacts by providing a low shear strength interface for sliding. However, the nanoscale mechanisms underlying low friction on SAMs are still not fully understood, especially in liquid environments in which hydrophobility or hydrophilicity affects friction. To understand this effect, friction of SAMs in water was measured using atomic force microscope experiments and molecular dynamics simulations, where hydrophilicity or hydrophobicity was determined by the terminal group of the alkanethiols. The friction on hydrophilic SAMs was larger than that on hydrophobic SAMs in both experiments and simulations, but this trend could not be explained by the strength of the adhesive force between the tip and the SAMs. Instead, analysis of the contributions of the water and SAMs to the total friction force revealed that the difference between the hydrophobic and hydrophilic SAMs could be explained by interactions between the tip and water during sliding. The much larger tip-water force on hydrophilic SAMs was attributed to a dense layer of water that was displaced during sliding as well as hydrogen bonds that formed between the water molecules and hydrophilic SAMs and were then broken by the tip as it slid, leading to higher friction force.

Lipid Bicelle Micropatterning Using Chemical Lift-Off Lithography.

Supported lipid membranes are versatile biomimetic coatings for the chemical functionalization of inorganic surfaces. Developing simple and effective fabrication strategies to form supported lipid membranes with micropatterned geometries is a long-standing challenge. Herein, we demonstrate how the combination of chemical lift-off lithography (CLL) and easily prepared lipid bicelle nanostructures can yield micropatterned, supported lipid membranes on gold surfaces with high pattern resolution, conformal character, and biofunctionality. Using CLL, we functionalized gold surfaces with patterned arrays of hydrophilic and hydrophobic self-assembled monolayers (SAMs). Time-lapse fluorescence microscopy imaging revealed that lipid bicelles adsorbed preferentially onto the hydrophilic SAM regions, while there was negligible lipid adsorption onto the hydrophobic SAM regions. Functional receptors could be embedded within the lipid bicelles, which facilitated selective detection of receptor-ligand binding interactions in a model streptavidin-biotin system. Quartz crystal microbalance-dissipation measurements further identified that lipid bicelles adsorb irreversibly and remain intact on top of the hydrophilic SAM regions. Taken together, our findings indicate that lipid bicelles are useful lipid nanostructures for reproducibly assembling micropatterned, supported lipid membranes with precise pattern fidelity.

Simulation of Subnanometer Contrast in Dynamic Atomic Force Microscopy of Hydrophilic Alkanethiol Self-Assembled Monolayers in Water

Atomic resolution imaging of surfaces in liquid environments using atomic force microscopy (AFM) is challenging in terms of both reproducibility and measurement interpretation. To understand the origins of these challenges, we used molecular dynamics simulations of AFM on hydrophilic self-assembled monolayers (SAMs) in water. The force on the model AFM tip was calculated as a function of lateral and vertical position relative to the SAM surface. The contributions of the water and SAMs to the overall force were analyzed, and the former was correlated to the water density distribution. Then, dynamic AFM was modeled by oscillating the tip at a driving amplitude. It was found that the contrast between amplitudes at different lateral positions on the surface was dependent on the vertical position of the tip. Lastly, amplitude maps were produced for two vertical positions at constant height, and the ability to capture atomic resolution was related to the force on the tip. These results offer an explanation for the observed instability in atomic scale imaging using AFM and more generally provide insight into the contrast mechanisms of surface images obtained in liquid environments.

Interaction of synthetic and lignin-based sulfonated polymers with hydrophilic, hydrophobic, and charged self-assembled monolayers.

There is a need to understand the role of polymer structure on its interaction with surfaces to produce effective functional surfaces. In this work, we produced two anionic polymers of lignin-3-sulfopropyl methacrylate (L-S) and poly(vinyl alcohol-co-vinyl acetate)-3-sulfopropyl methacrylate (PVA-S) with similar charge densities and molecular weights. On the gold-coated surface, we deposited self-assembled monolayers (SAM) bearing different terminal moieties namely, hydroxyl, carboxyl, methyl, and amine groups of alkanethiols. This study highlighted the difference between the interaction of L-S and PVA-S and functionalized self-assembled surfaces. The information was generated using advanced tools, such as an X-ray photoelectron spectroscopy (XPS), and a quartz crystal microbalance with dissipation (QCM-D), which facilitated the correlation development between polymer properties and deposition performance on the functionalized surfaces. The higher deposition of PVA-S than L-S onto OH and COOH surfaces was observed due to its greater hydrogen bonding development and higher solubility. The solubility and structure of PVA-S were also beneficial for its higher adsorption than L-S onto CH3 and NH2 surfaces. However, the variation in pH, temperature, and salt significantly affected the adsorption of the macromolecules.

Origin of Enhanced Cyclability in Covalently Modified LiMn1.5Ni0.5O4 Cathodes.

High-voltage lithium-ion cathode materials exhibit exceptional energy densities; however, rapid capacity fade during cell cycling prohibits their widespread utilization. Surface modification of cathode-active materials by organic self-assembled monolayers (SAMs) has emerged as an approach to improve the longevity of high-voltage electrodes; however, the surface chemistry at the electrode/electrolyte interphase and its dependence on monolayer structure remains unclear. Herein, we investigate the interplay between monolayer structure, electrochemical performance, and surface chemistry of high-voltage LiMn1.5Ni0.5O4 (LMNO) electrodes by the application of silane-based SAMs of variable length and chemical composition. We demonstrate that the application of both hydrophobic and hydrophilic monolayers results in improved galvanostatic capacity retention relative to unmodified LMNO. The extent of this improvement is tied to the structure of the monolayer with fluorinated alkyl-silanes exhibiting the greatest overall capacity retention, above 96% after 100 charge/discharge cycles. Postmortem surface analysis reveals that the presence of the monolayer enhances the deposition of LiF at the electrode surface during cell cycling and that the total surface concentration correlates with the overall improvements in capacity retention. We propose that the enhanced deposition of highly insulating LiF increases the anodic stability of the interphase, contributing to the improved galvanostatic performance of modified electrodes. Moreover, this work demonstrates that the modification of the electrode surface by the selection of an appropriate monolayer is an effective approach to tune the properties and behavior of the electrode/electrolyte interphase formed during battery operation.

The expression and characterization of recombinant cp19k barnacle cement protein from Pollicipes pollicipes.

Adhesive proteins of barnacle cement have potential as environmentally friendly adhesives owing to their ability to adhere to various substrates in aqueous environments. By understanding the taxonomic breath of barnacles with different lifestyles, we may uncover commonalities in adhesives produced by these specialized organisms. The 19 kDa cement protein (cp19k) of the stalked barnacle Pollicipes pollicipes was expressed in Escherichia coli BL21 to investigate its adhesive properties. Initial expression of hexahistidine-tagged protein (rPpolcp19k-his) yielded low levels of insoluble protein. Co-overproduction of E. coli molecular chaperones GroEL-GroES and trigger factor (TF) increased soluble protein yields, although TF co-purified with the target protein (TF-rPpolcp19k-his). Surface coat analysis revealed high levels of adsorption of the TF-rPpolcp19k-his complex and of purified E. coli TF on both hydrophobic and hydrophilic surfaces, while low levels of adsorption were observed for rPpolcp19k-his. Tag-free rPpolcp19k protein also exhibited low adsorption compared to fibrinogen and Cell-Tak controls on hydrophobic, neutral hydrophilic and charged self-assembled monolayers under surface plasmon resonance assay conditions designed to mimic the barnacle cement gland or seawater. Because rPpolcp19k protein displays low adhesive capability, this protein is suggested to confer the ability to self-assemble into a plaque within the barnacle cement complex. This article is part of the theme issue 'Transdisciplinary approaches to the study of adhesion and adhesives in biological systems'.

Heterodyne-detected sum frequency generation of water at surfaces with varying hydrophobicity.

Aqueous surfaces mediate many atmospheric, biological, and technological processes. At the interface, the bulk hydrogen-bonding network is terminated and the interfacial water molecules restructure according to the surface chemistry of the interface. Given the complexity of both natural and technical aqueous interfaces, self-assembled monolayers provide a platform for controllably tuning the chemical composition of the surface and thus the water restructuring. Here, we study a hydrophobic monolayer, a hydrophilic monolayer, and a mixed hydrophobic/hydrophilic monolayer in contact with water. Monolayers composed of both hydrophilic and hydrophobic chains mimic the complex and heterogeneous chemical composition of natural and technological surfaces. By employing heterodyne-detected sum frequency generation, the purely absorptive vibrational line shape of interfacial water is measured experimentally. We examined the structure of the interfacial water in contact with each of the monolayers by analyzing the relative dipole moment orientations and fitting the imaginary component of χ(2) with a combination of Lorentzian and Gaussian line shapes. For all of the monolayers, the hydrogen-bonded water points toward the monolayer, which is opposite of the orientation of the hydrogen-bonded water at the air-water interface. Additionally, a strongly hydrogen-bonded water species exists for the monolayers containing hydrophilic chains. The spectroscopic results suggest that the microscopic water structure in contact with the mixed monolayer is dominated by the hydrophilic parts of the monolayer, while the contact angle shows that at the macroscopic level the surface properties lie closer to the pure hydrophobic monolayer.

Bi-Gaussian Stratified Wetting Model on Rough Surfaces.

Wetting mechanisms on rough surfaces were understood from either a monolayer or a multiscale perspective. However, it has recently been shown that the bi-Gaussian stratified nature of real surfaces should be accounted for when modeling mechanisms of lubrication, sealing, contact, friction, acoustic emission, and manufacture. In this work, a model combining Wenzel and Cassie theories was put forward to predict the static contact angle of a droplet on a bi-Gaussian stratified surface. The model was initially applied to numerically simulated surfaces and subsequently demonstrated on hydrophilic steel and hydrophobic self-assembled monolayer specimens with preset bi-Gaussian stratified topographies. In the Wenzel state, both the upper and the lower surface components are fully wetted. In the Cassie state, the upper component is still completely wetted, while the lower component serves as gas traps and reservoirs. By this model, wetting evolution was assessed, and the existence of different wetting states and potential state transitions was predicted.

PEGylated titanate nanosheets: hydrophilic monolayers with a superior capacity for the selective isolation of immunoglobulin G

A novel organic-inorganic hybrid was prepared by anchoring (3-aminopropyl)triethoxysilane (APTES) on the surface of monolayer titanate nanosheets and subsequent modification with hydrophilic polyethylene glycol (PEG). The PEGylated hydrophilic monolayer titanate nanosheets were abbreviated as PEG-APTES-TiNSs, and they exhibit a lateral dimension of dozens of nanometers and a thickness of ca. 1.9 nm. PEGylation of the titanate nanosheets significantly improved their selectivity toward the adsorption of glycoproteins through strong hydrophilic interaction, providing an adsorption capacity of 2540.9 mg g-1 for immunoglobulin G (IgG). The retained IgG is readily collected at a recovery rate of 83.4% with 0.5% (m/v) ammonium hydroxide (NH4OH) as the stripping reagent. PEG-APTES-TiNSs are applied for the selective adsorption of IgG from human serum, which is further confirmed by SDS-PAGE assay.

Role of fingerprint-inspired relief structures in elastomeric slabs for detecting frictional differences arising from surface monolayers.

The perception of fine texture of an object is influenced by its microscopic topography and surface chemistry-i.e., the topmost layer of atoms and molecules responsible for its surface energy, adhesion, and friction generated when probed by a fingertip. Recently, it has been shown that human subjects can discriminate high-energy (i.e., hydrophilic), oxidized silicon from low-energy (i.e., hydrophobic), fluorinated alkylsilane-coated silicon. The basis of discrimination was consistent with differences between stick-slip friction frequencies generated when sliding the fingertip across the two surfaces. One aspect that was not examined was the presence of surface relief structures on the fingertip. Indeed, papillary ridges-fingerprints-may be involved in enhanced discrimination of fine textures arising from surface roughness, but how (or whether) fingerprints may also be involved in the discrimination of surface chemistry-through its effect on friction-is unknown. Here, using a mock finger made from a slab of silicone rubber shows that relief structures amplify differences in stick-slip friction when slid across either a hydrophilic oxide or a hydrophobic monolayer on silicon. We quantify the similarity between the friction traces of the mock fingers sliding across hydrophilic and hydrophobic surfaces under varying velocities and applied masses using a cross-correlation analysis. We then convert the cross-correlational data into convenient "discriminability matrices." These matrices identify combinations of downward forces and sliding velocities that enhance differences in friction between hydrophilic and hydrophobic monolayers. In addition, a computational model of macroscopic, "rate-and-state" friction confirms that frictional differences in chemistry are amplified when elastic slabs bear a patterned interface. This biomimetic approach to engineering sliding interfaces may inform the development of improved electronic skin and haptic devices and may contribute to understanding the role of relief structure in tactile perception.

Physical deposition behavior of stiff amphiphilic polyelectrolytes in an external electric field

Coarse-grained molecular dynamics simulations are conducted to study the physical deposition behavior of stiff amphiphilic polyelectrolytes (APEs) in an external electric field. The effects of chain stiffness, the charge distribution of a hydrophilic block, and electric field strength are investigated. Amphiphilic multilayers, which consist of a monolayer of adsorbed hydrophilic monomers (HLMs), a hydrophobic layer, and another hydrophilic layer, are formed in a selective solvent. All cases exhibit locally ordered hydrophilic monolayers. Two kinds of hydrophobic micelles are distinguished based on local structures. Stripe and network hydrophobic patterns are formed in individual cases. Increasing the chain stiffness decreases the thickness of the deposited layer, the lateral size of the hydrophobic micelles, and the amount of deposition. Increasing the number of positively charged HLMs in a single chain has the same effect as increasing chain stiffness. Moreover, when applied normally to the substrate, the electric field compresses the deposited structures and increases the amount of deposition by pulling more PEs toward the substrate. A stronger electric field also facilitates the formation of a thinner and more ordered hydrophilic adsorption layer. These estimates help us explore how to tailor patterned nano-surfaces, nano-interfaces, or amphiphilic nanostructures by physically depositing semi-flexible APEs which is of crucial importance in physical sciences, life sciences and nanotechnology.

Physical deposition behavior of charged amphiphilic diblock copolymers: Effect of charge distribution and electric field

Coarse-grained molecular dynamics simulations are used to investigate physical deposition behavior of charged amphiphlic diblock copolymers. The effects of solvent selectivity, charge distribution in amphiphlic diblock copolymers, and electric field strength on deposition conformations are studied qualitatively. Flat amphiphilic bilayers, which consist of hydrophilic monolayer and hydrophobic brush, are formed by physical deposition of charged amphiphlic diblock copolymers in nonselective solvents. For physically deposited amphiphlic diblock copolymers in selective solvents, amphiphilic bilayers consist of disc-shaped hydrophilic monolayers and hydrophobic nanospheres are found. This study sheds light on the formation of various amphiphlic diblock copolymer deposition conformations in different solvents and interaction mechanism of different components. Furthermore, the evolution of physical deposition process of charged amphiphlic diblock copolymers layer offers new insight to the controlling of amphiphilic bilayer thickness, hydrophobic nanosphere size, and interface property of depositional amphiphlic diblock copolymers.