Hydrogels For Tissue Engineering Research Articles

A Multifunctional Herb-Derived Glycopeptide Hydrogel for Chronic Wound Healing.

Chronic wounds constitute an increasingly prevalent global healthcare issue, characterized by recurring bacterial infections, pronounced oxidative stress, compromised functionality of immune cells, unrelenting inflammatory reactions, and deficits in angiogenesis. In response to these multifaceted challenges, the study introduced a stimulus-responsive glycopeptide hydrogel constructed by oxidized Bletilla striata polysaccharide (OBSP), gallic acid-grafted ε-Polylysine (PLY-GA), and paeoniflorin-loaded micelles (MIC@Pae), called OBPG&MP. The hydrogel emulates the structure of glycoprotein fibers of the extracellular matrix (ECM), exhibiting exceptional injectability, self-healing, and biocompatibility. It adapts responsively to the inflammatory microenvironment of chronic wounds, sequentially releasing therapeutic agents to eradicate bacterial infection, neutralize reactive oxygen species (ROS), modulate macrophage polarization, suppress inflammation, and encourage vascular regeneration and ECM remodeling, playing a critical role across the inflammatory, proliferative, and remodeling phases of wound healing. Both in vitro and in vivo studies confirmed the efficacy of OBPG&MP hydrogel in regulating the wound microenvironment and enhancing the regeneration and remodeling of chronic wound skin tissue. This research supports the vast potential for herb-derived multifunctional hydrogels in tissue engineering and regenerative medicine.

Development and characterization of 3D-printed electroconductive pHEMA-co-MAA NP-laden hydrogels for tissue engineering

AbstractTissue engineering (TE) continues to be widely explored as a potential solution to meet critical clinical needs for diseased tissue replacement and tissue regeneration. In this study, we developed a poly(2-hydroxyethyl methacrylate-co-methacrylic acid) (pHEMA-co-MAA) based hydrogel loaded with newly synthesized conductive poly(3,4-ethylene-dioxythiophene) (PEDOT) and polypyrrole (PPy) nanoparticles (NPs), and subsequently processed these hydrogels into tissue engineered constructs via three-dimensional (3D) printing. The presence of the NPs was critical as they altered the rheological properties during printing. However, all samples exhibited suitable shear thinning properties, allowing for the development of an optimized processing window for 3D printing. Samples were 3D printed into pre-determined disk-shaped configurations of 2 and 10 mm in height and diameter, respectively. We observed that the NPs disrupted the gel crosslinking efficiencies, leading to shorter degradation times and compressive mechanical properties ranging between 450 and 550 kPa. The conductivity of the printed hydrogels increased along with the NP concentration to (5.10±0.37)×10−7 S/cm. In vitro studies with cortical astrocyte cell cultures demonstrated that exposure to the pHEMA-co-MAA NP hydrogels yielded high cellular viability and proliferation rates. Finally, hydrogel antimicrobial studies with staphylococcus epidermidis bacteria revealed that the developed hydrogels affected bacterial growth. Taken together, these materials show promise for various TE strategies. Graphic abstract

Collagen short nanofiber-embedded chondroitin sulfate–hyaluronic acid nanocomposite: A cartilage-mimicking in situ-forming hydrogel with fine-tuned properties

In situ-forming hydrogels that possess the ability to be injected in a less invasive manner and mimic the biochemical composition and microarchitecture of the native cartilage extracellular matrix are desired for cartilage tissue engineering. Besides, gelation time and stiffness of the hydrogel are two interdependent factors that affect cells' distribution and fate and hence need to be optimized. This study presented a bioinspired in situ-forming hydrogel composite of hyaluronic acid (HA), chondroitin sulfate (CS), and collagen short nanofiber (CSNF). HA and CS were functionalized with aldehyde and amine groups to form a gel through a Schiff-base reaction. CSNF was fabricated via electrospinning, followed by fragmentation by ultrasonics. Gelation time (11–360 s) and compressive modulus (1.4–16.2 kPa) were obtained by varying the concentrations of CS, HA, CSNFs, and CSNFs length. The biodegradability and biocompatibility of the hydrogels with varying gelation and stiffness were also assessed in vitro and in vivo. At three weeks, the assessment of hydrogels' chondrogenic differentiation also yields varying levels of chondrogenic differentiation. The subcutaneous implantation of the hydrogels in a mouse model indicated no severe inflammation. Results demonstrated that the injectable CS/HA@CSNF hydrogel was a promising hydrogel for tissue engineering and cartilage regeneration.

Superparamagnetic freeze-thawed PVA hydrogel for applications in tissue engineering, drug delivery and bioimaging

The prerequisite of super-paramagnetic materials in biomedical applications necessitate the optimum magnetic saturation and negligible cytotoxic characteristics. Especially, the development of super-paramagnetic hydrogels in tissue engineering has been rather a scarce documentation. In this context, the present study aims to integrate Fe2+/3+ in PVA hydrogels through repetitive freeze-thawing technique followed by lyophilisation. A detailed physiochemical characterization of the developed hydrogels has been evaluated using X-ray diffraction, TGA, Raman and XPS techniques. The binding of iron with PVA has been confirmed through FTIR analysis and magnetic measurements at room temperature ensured the super-paramagnetic nature of obtained hydrogels. The release profiles of gentamycin drug loaded PVA hydrogel showcased an 8% release in 12 h and this profile followed the non- Fickian diffusion process. The maximum tensile and compression strength of hydrogels are respectively determined as 3.2 and 4.6 MPa. The presence of Fe in the hydrogel deliberated T2 MRI imaging characteristics. In vitro test results affirmed the cell viability of more than 60% for all the hydrogels. The overall findings from the study signified the applications of FePVA hydrogels in tissue engineering applications.

Dextrans, Pullulan and Lentinan, New Scaffold Materials for Use as Hydrogels in Tissue Engineering.

The development of hydrogels based on dextrans, pullulan and lentinan to be used in biomedical applications including tissue engineering is reported. Despite the fact that selected polysaccharides such as hyaluronic acid are well established, little is known, how these polysaccharides can be chemically modified to create hydrogels under controlled conditions. In this study we present a small library of chemically modified polysaccharides which are used for a divergent approach to achieve biomedical relevant hydrogels. In this case the crosslinking is based on thio ether formation between thiol modified donor and vinylsulfone or maleimide modified acceptor components. Successful synthesis of the linker systems and coupling at the polysaccharides, hydrogel formation takes place under physiological conditions. We extended the study by coupling small molecules like adhesion factors for increasing cell compatibility as well as a dye for further studies. The different hydrogels were studied to their rheological properties, water uptake, their permeability, biodegrability and their cytotoxicity.

Fibrin-Based Hydrogels with Reactive Amphiphilic Copolymers for Mechanical Adjustments Allow for Capillary Formation in 2D and 3D Environments.

This study focuses on enhancing controllable fibrin-based hydrogels for tissue engineering, addressing existing weaknesses. By integrating a novel copolymer, we improved the foundation for cell-based angiogenesis with adaptable structural features. Tissue engineering often faces challenges like waste disposal and nutrient supply beyond the 200 µm diffusion limit. Angiogenesis breaks through this limitation, allowing the construction of larger constructs. Our innovative scaffold combination significantly boosts angiogenesis, resulting in longer branches and more capillary network junctions. The copolymer attached to fibrin fibers enables precise adjustment of hydrogel mechanical dynamic properties for specific applications. Our material proves effective for angiogenesis, even under suppression factors like suramin. In our study, we prepared fibrin-based hydrogels with and without the copolymer PVP12400-co-GMA10mol%. Using a co-culture system of human umbilical vein endothelial cells (HUVEC) and mesenchymal stem cells (MSC), we analyzed angiogenetic behavior on and within the modified hydrogels. Capillary-like structures were reproducibly formed on different surfaces, demonstrating the general feasibility of three-dimensional endothelial cell networks in fibrin-based hydrogels. This highlights the biomaterial's suitability for in vitro pre-vascularization of biohybrid implants.

Encapsulation of pristine and silica-coated human adipose-derived mesenchymal stem cells in gelatin colloidal hydrogels for tissue engineering and bioprinting applications.

Colloidal gels assembled from gelatin nanoparticles (GNPs) as particulate building blocks show strong promise to solve challenges in cell delivery and biofabrication, such as low cell survival and limited spatial retention. These gels offer evident advantages to facilitate cell encapsulation, but research on this topic is still limited, which hampers our understanding of the relationship between the physicochemical and biological properties of cell-laden colloidal gels. Human adipose-derived mesenchymal stem cells were successfully encapsulated in gelatin colloidal gels and evaluated their mechanical and biological performance over 7 days. The cells dispersed well within the gels without compromising gel cohesiveness, remained viable, and spread throughout the gels. Cells partially coated with silica were introduced into these gels, which increased their storage moduli and decreased their self-healing capacity after 7 days. This finding demonstrates the ability to modulate gel stiffness by incorporating cells partially coated with silica, without altering the solid content or introducing additional particles. Our work presents an efficient method for cell encapsulation while preserving gel integrity, expanding the applicability of colloidal hydrogels for tissue engineering and bioprinting. Overall, our study contributes to the design of improved cell delivery systems and biofabrication techniques.

Cross-Linking Methods of the Silk Protein Hydrogel in Oral and Craniomaxillofacial Tissue Regeneration.

Craniomaxillofacial tissue defects are clinical defects involving craniomaxillofacial and oral soft and hard tissues. They are characterized by defect-shaped irregularities, bacterial and inflammatory environments, and the need for functional recovery. Conventional clinical treatments are currently unable to achieve regeneration of high-quality oral craniomaxillofacial tissue. As a natural biomaterial, silk fibroin (SF) has been widely studied in biomedicine and has broad prospects for use in tissue regeneration. Hydrogels made of SF showed excellent water retention, biocompatibility, safety and the ability to combine with other materials. To gain an in-depth understanding of the current development of SF, this article reviews the structure, preparation and application prospects in oral and craniomaxillofacial tissue regenerative medicine. It first briefly introduces the structure of SF and then summarizes the principles, advantages and disadvantages of the different cross-linking methods (physical cross-linking, chemical cross-linking and double network structure) of SF. Finally, the existing research on the use of SF in tissue engineering and the prospects of using SF with different cross-linking methods in oral and craniomaxillofacial tissue regeneration are also discussed. This review is intended to show the advantages of SF hydrogels in tissue engineering and provides theoretical support for establishing novel and viable silk protein hydrogels for regeneration.

Heterogeneous DNA hydrogel loaded with Apt02 modified tetrahedral framework nucleic acid accelerated critical-size bone defect repair

Segmental bone defects, stemming from trauma, infection, and tumors, pose formidable clinical challenges. Traditional bone repair materials, such as autologous and allogeneic bone grafts, grapple with limitations including source scarcity and immune rejection risks. The advent of nucleic acid nanotechnology, particularly the use of DNA hydrogels in tissue engineering, presents a promising solution, attributed to their biocompatibility, biodegradability, and programmability. However, these hydrogels, typically hindered by high gelation temperatures (∼46 °C) and high construction costs, limit cell encapsulation and broader application. Our research introduces a novel polymer-modified DNA hydrogel, developed using nucleic acid nanotechnology, which gels at a more biocompatible temperature of 37 °C and is cost-effective. This hydrogel then incorporates tetrahedral Framework Nucleic Acid (tFNA) to enhance osteogenic mineralization. Furthermore, considering the modifiability of tFNA, we modified its chains with Aptamer02 (Apt02), an aptamer known to foster angiogenesis. This dual approach significantly accelerates osteogenic differentiation in bone marrow stromal cells (BMSCs) and angiogenesis in human umbilical vein endothelial cells (HUVECs), with cell sequencing confirming their targeting efficacy, respectively. In vivo experiments in rats with critical-size cranial bone defects demonstrate their effectiveness in enhancing new bone formation. This innovation not only offers a viable solution for repairing segmental bone defects but also opens avenues for future advancements in bone organoids construction, marking a significant advancement in tissue engineering and regenerative medicine.

Pristine gelatin incorporation as a strategy to enhance the biofunctionality of poly(vinyl alcohol)-based hydrogels for tissue engineering applications.

Synthetic polymers, such as poly(vinyl alcohol) (PVA), are popular biomaterials for the fabrication of hydrogels for tissue engineering and regenerative medicine (TERM) applications, as they provide excellent control over the physico-chemical properties of the hydrogel. However, their bioinert nature is known to limit cell-biomaterial interactions by hindering cell infiltration, blood vessel recruitment and potentially limiting their integration with the host tissue. Efforts in the field have therefore focused on increasing the biofunctionality of synthetic hydrogels, without limiting the advantages associated with their tailorability and controlled release capacity. The aim of this study was to investigate the suitability of pristine gelatin to enhance the biofunctionality of tyraminated PVA (PVA-Tyr) hydrogels, by promoting cell infiltration and host blood vessel recruitment for TERM applications. Pure PVA-Tyr hydrogels and PVA-Tyr hydrogels incorporated with vascular endothelial growth factor (VEGF), a well-known pro-angiogenic stimulus, were used for comparison. Incorporating increasing concentrations of VEGF (0.01-10 μg mL-1) or gelatin (0.01-5 wt%) did not influence the physical properties of PVA-Tyr hydrogels. However, their presence within the polymer network (>0.1 μg mL-1 VEGF and >0.1 wt% gelatin) promoted endothelial cell interactions with the hydrogels. The covalent binding of unmodified gelatin or VEGF to the PVA-Tyr network did not hamper their inherent bioactivity, as they both promoted angiogenesis in a chick chorioallantoic membrane (CAM) assay, performing comparably with the unbound VEGF control. When the PVA-Tyr hydrogels were implanted subcutaneously in mice, it was observed that cell infiltration into the hydrogels was possible in the absence of gelatin or VEGF at 1- or 3-weeks post-implantation, highlighting a clear difference between in vitro an in vivo cell-biomaterial interaction. Nevertheless, the presence of gelatin or VEGF was necessary to enhance blood vessel recruitment and infiltration, although no significant difference was observed between these two biological molecules. Overall, this study highlights the potential of gelatin as a standalone pro-angiogenic cue to enhance biofunctionality of synthetic hydrogels and provides promise for their use in a variety of TERM applications.

Dual-network DNA-silk fibroin hydrogels with controllable surface rigidity for regulating chondrogenic differentiation.

Osteoarthritis (OA) is a common joint disease known for cartilage degeneration, leading to a substantial burden on individuals and society due to its high disability rate. However, current clinical treatments for cartilage defects remain unsatisfactory due to the unclear mechanisms underlying cartilage regeneration. Tissue engineering hydrogels have emerged as an attractive approach in cartilage repair. Recent research studies have indicated that stem cells can sense the mechanical strength of hydrogels, thereby regulating their differentiation fate. In this study, we present the groundbreaking construction of dual-network DNA-silk fibroin (SF) hydrogels with controllable surface rigidity. The supramolecular networks, formed through DNA base-pairing, induce the development of β-sheet structures by constraining and aggregating SF molecules. Subsequently, SF was cross-linked via horseradish peroxidase (HRP)-mediated enzyme reactions to form the second network. Experimental results demonstrated a positive correlation between the surface rigidity of dual-network DNA-SF hydrogels and the DNA content. Interestingly, it was observed that dual-network DNA-SF hydrogels with moderate surface rigidity exhibited the highest effectiveness in facilitating the migration of bone marrow mesenchymal stem cells (BMSCs) and their chondrogenic differentiation. Transcriptome sequencing further confirmed that dual-network DNA-SF hydrogels primarily enhanced chondrogenic differentiation of BMSCs by upregulating the Wnt and TGF-β signaling pathways while accelerating collagen II synthesis. Furthermore, in vivo studies revealed that dual-network DNA-SF hydrogels with moderate surface rigidity significantly accelerated cartilage regeneration. In summary, the dual-network DNA-SF hydrogels represent a promising and novel therapeutic strategy for cartilage regeneration.

Development of Human-Derived Photocrosslinkable Gelatin Hydrogels for Tissue Engineering.

Hydrogels are often used as biomimetic matrices for tissue regeneration. The source of the hydrogel is of utmost importance, as it affects the physicochemical characteristics and must be carefully selected to stimulate specific cell behaviors. Naturally derived polymeric biomaterials have inherent biological moieties, such as cell binding and protease cleavage sites, and thus can provide a suitable microenvironment for cells. Human-derived matrices can mitigate potential risks associated with the immune response and disease transmission from animal-derived biomaterials. In this article, we developed glycidyl methacrylate-modified human-derived gelatin (hGelGMA) hydrogels for use in tissue engineering applications. By adjusting the glycidyl methacrylate concentration in the reaction mixture, we synthesized hGelGMA with low, medium, and high degrees of modification referred to as hGelGMA-L, hGelGMA-M, and hGelGMA-H, respectively. The amount of polymeric networks in the hydrogels was increased proportionally with the degree of modification. This change has resulted in a decreasing trend in pore size, porosity, and consequent swelling ratio. Similarly, increasing the polymer concentration also exhibited slower enzymatic degradation. On the other hand, increasing the polymer concentration led to an improvement in mechanical properties, where the compressive moduli of hGelGMA-L, hGelGMA-M, and hGelGMA-H hydrogels have changed at 2.9 ± 1.0, 13.7 ± 0.9, and 26.4 ± 2.5 kPa, respectively. The cytocompatibility of hGelGMA was assessed by 3D encapsulation of human-derived cells, including human dermal fibroblasts (HDFs) and human mesenchymal stem cells (hMSCs), in vitro. Regardless of the degree of glycidyl methacrylate modification, the hGelGMA hydrogels preserved the viability of encapsulated cells and supported their growth and proliferation. HDF cells showed a higher metabolic activity in hGelGMA-H, while MSCs exhibited an increased metabolic activity when they were encapsulated in hGelGMA-M or hGelGMA-H. These results showed that photocrosslinkable human-derived gelatin-based hydrogels can be synthesized and their physical properties can be distinctly fine-tuned to different extents as a function of their degrees of modification depending on the needs of the target tissue. Due to its promising physical and biological properties, it is anticipated that hGelGMA can be utilized in a wide spectrum of tissue engineering applications.

Advanced Applications of Silk-Based Hydrogels for Tissue Engineering: A Short Review.

Silk has been consistently popular throughout human history due to its enigmatic properties. Today, it continues to be widely utilized as a polymer, having first been introduced to the textile industry. Furthermore, the health sector has also integrated silk. The Bombyx mori silk fibroin (SF) holds the record for being the most sustainable, functional, biocompatible, and easily produced type among all available SF sources. SF is a biopolymer approved by the FDA due to its high biocompatibility. It is versatile and can be used in various fields, as it is non-toxic and has no allergenic effects. Additionally, it enhances cell adhesion, adaptation, and proliferation. The use of SF has increased due to the rapid advancement in tissue engineering. This review comprises an introduction to SF and an assessment of the relevant literature using various methods and techniques to enhance the tissue engineering of SF-based hydrogels. Consequently, the function of SF in skin tissue engineering, wound repair, bone tissue engineering, cartilage tissue engineering, and drug delivery systems is therefore analysed. The potential future applications of this functional biopolymer for biomedical engineering are also explored.

Recent advances on 3D-bioprinted gelatin methacrylate hydrogels for tissue engineering in wound healing: A review of current applications and future prospects.

Advancements in 3D bioprinting, particularly the use of gelatin methacrylate (GelMA) hydrogels, are ushering in a transformative era in regenerative medicine and tissue engineering. This review highlights the pivotal role of GelMA hydrogels in wound healing and skin regeneration. Its biocompatibility, tunable mechanical properties and support for cellular proliferation make it a promising candidate for bioactive dressings and scaffolds. Challenges remain in optimizing GelMA hydrogels for clinical use, including scalability of 3D bioprinting techniques, durability under physiological conditions and the development of advanced bioinks. The review covers GelMA's applications from enhancing wound dressings, promoting angiogenesis and facilitating tissue regeneration to addressing microbial infections and diabetic wound healing. Preclinical studies underscore GelMA's potential in tissue healing and the need for further research for real-world applications. The future of GelMA hydrogels lies in overcoming these challenges through multidisciplinary collaboration, advancing manufacturing techniques and embracing personalized medicine paradigms.

Development and Characterization of Decellularized Lung Extracellular Matrix Hydrogels.

The use of extracellular matrix (ECM)-derived hydrogels in tissue engineering has become increasingly popular, as they can mimic cells' natural environment in vitro. However, maintaining the native biochemical content of the ECM, achieving mechanical stability, and comprehending the impact of the decellularization process on the mechanical properties of the ECM hydrogels are challenging. Here, a pipeline for decellularization of bovine lung tissue using two different protocols, downstream characterization of the effectiveness of decellularization, fabrication of reconstituted decellularized lung ECM hydrogels and assessment of their mechanical and cytocompatibility properties were described. Decellularization of the bovine lung was pursued using a physical (freeze-thaw cycles) or chemical (detergent-based) method. Hematoxylin and Eosin staining was performed to validate the decellularization and retention of major ECM components. For the evaluation of residual collagen and sulfated glycosaminoglycan (sGAG) content within the decellularized samples, Sirius red and Alcian blue staining techniques were employed, respectively. Mechanical properties of the decellularized lung ECM hydrogels were characterized by oscillatory rheology. The results suggest that decellularized bovine lung hydrogels can provide a reliable organotypicalternative to commercial ECM products by retaining most native ECM components. Furthermore, these findings reveal that the decellularization method of choice significantly affects gelation kinetics as well as the stiffness and viscoelastic properties of resulting hydrogels.

Research progress of glycan-based supramolecular hydrogels in tissue engineering

Research progress of glycan-based supramolecular hydrogels in tissue engineering

Synthesis and Characterization of Novel pH-Responsive Aminated Alginate Derivatives Hydrogels for Tissue Engineering and Drug Delivery.

The aims of this study are to synthesize new derivatives of sodium alginate that improve the inherent properties, such as hydrogel strengthening, and create environmental sensitivity, such as pH sensitivity, for use in drug delivery. Today, hydrogels, due to outstanding properties such as biodegradability, biocompatibility, mechanical properties, and response to stimuli properties, are widely used as harmless biomaterials in various fields in drug delivery, wound dressing, and tissue engineering. Stimulus-sensitive polymers significantly respond to slight changes in their environment. Different types of stimuli are used to influence the properties of polymers, the most important of which are temperature and pH because these are two vital factors in the human body; hence, temperature-sensitive and pHsensitive hydrogels have been extensively studied. The ability to absorb water and swell the hydrogel is due to hydrophilic chains in the hydrogel network, and water absorption by hydrogel can be controlled by response to the stimuli. Since hydrogels mimic human tissue, the ability to retain water in them is essential. As a result, it is considered in many biomedical drug delivery systems. Stimulusresponsive swelling can control diffusion out of and into the hydrogel network, which allows temporal and spatial control of drug release. When a drug is loaded onto a biodegradable and stimulisensitive hydrogel, the drug delivery system has the added advantage of sustained release of the drug, which reduces side effects. In this study, two different hydrocarbons, [1,3-diaminopropane (DAP)] as a short-chain hydrocarbon, and [1,7-diaminoheptane (DAH)] as a long-chain hydrocarbon were grafted onto three types ofsodium alginate (SA), through amide bond linkages. The hydrogel copolymer matrices were compared with sodium alginate (SA) beads. The graft copolymers were characterized using FTIR, 1HNMR, XRD spectroscopy, elemental analysis (CHNS) and thermal analysis (TGA, DTA and DSC). An environmental scanning electron microscope (ESEM) was used to investigate the surface morphology of hydrogels. Effects of variables such as the length of hydrocarbon chains cross-linked to alginate, temperature, pH, and cross-linkers on the properties of hydrogels investigated in the temperature range of 2-70 ˚C and two different pH values (4.4 and 7.4). The results showed that when the hydrocarbon chain length of diamines decreases, the extent of cross-linking and strength of the hydrogels are increased. Other results suggest that the hydrogels obtained from high-viscosity alginate derivatives had positive pH sensitivity. Hydrogels prepared in this study demonstrated good mechanical and swelling ratios that are necessary for wound dressing. DAP-g-SA and DAH-g-SA pH-sensitive hydrogels were successfully synthesized through amide bond linkages. The new synthesis derivatives showed lower swelling levels at low pH (4.4). In contrast, their swelling levels at higher pH (7.4) were significantly enhanced. Higher swelling degree could be obtained at high pH. pH-responsive hydrogels are especially useful for various biological applications due to their unique feature of controlled swelling, biodegradability, biocompatibility, and fluid retention in their network structures. pH-responsive hydrogels, as intelligent systems, can be used in controlled-release drug delivery systems such as insulin delivery.

Thiolated Poly‐ and Oligosaccharide‐Based Hydrogels for Tissue Engineering and Wound Healing

AbstractDue to thiolation of poly‐ and oligosaccharides numerous favorable properties for tissue engineering and wound healing can be introduced. Poly‐ and oligosaccharides can be thiolated via hydroxyl‐to‐thiol conversions or the covalent attachment of sulfhydryl ligands to hydroxyl, carbonic acid or amino groups on them. Since thiolated poly‐ and oligosaccharides can cross‐link via disulfide bonds, they form stable 3D networks with defined microarchitecture, stiffness, elasticity, and degradability. Furthermore, thiol groups can enhance cell adhesion since cells exhibit cysteine‐rich subdomains on their surface that form disulfide bonds with them. Sulfhydryl groups can also participate in cell signaling pathways favoring various cellular processes like proliferation, migration, spreading, and differentiation that are beneficial for tissue engineering and wound healing. In addition, a controlled release of active ingredients such as growth factors being bound via disulfide bonds to thiolated poly‐ and oligosaccharides can be achieved via thiol/disulfide exchange reactions. Over the last two decades, the number of thiolated poly‐ and oligosaccharides such as thiolated hyaluronic acid and thiolated chitosan used for tissue engineering and wound healing has increased tremendously. Within this review, an overview is provided about the chemistry of thiolated poly‐ and oligosaccharides, their key properties, applications and performance in clinical trials and as marketed products.

Designing Biomimetic Conductive Gelatin-Chitosan-Carbon Black Nanocomposite Hydrogels for Tissue Engineering.

Conductive nanocomposites play a significant role in tissue engineering by providing a platform to support cell growth, tissue regeneration, and electrical stimulation. In the present study, a set of electroconductive nanocomposite hydrogels based on gelatin (G), chitosan (CH), and conductive carbon black (CB) was synthesized with the aim of developing novel biomaterials for tissue regeneration application. The incorporation of conductive carbon black (10, 15 and 20 wt.%) significantly improved electrical conductivity and enhanced mechanical properties with the increased CB content. We employed an oversimplified unidirectional freezing technique to impart anisotropic morphology with interconnected porous architecture. An investigation into whether any anisotropic morphology affects the mechanical properties of hydrogel was conducted by performing compression and cyclic compression tests in each direction parallel and perpendicular to macroporous channels. Interestingly, the nanocomposite with 10% CB produced both anisotropic morphology and mechanical properties, whereas anisotropic pore morphology diminished at higher CB concentrations (15 and 20%), imparting a denser texture. Collectively, the nanocomposite hydrogels showed great structural stability as well as good mechanical stability and reversibility. Under repeated compressive cyclic at 50% deformation, the nanocomposite hydrogels showed preconditioning, characteristic hysteresis, nonlinear elasticity, and toughness. Overall, the collective mechanical behavior resembled the mechanics of soft tissues. The electrical impedance associated with the hydrogels was studied in terms of the magnitude and phase angle in dry and wet conditions. The electrical properties of the nanocomposite hydrogels conducted in wet conditions, which is more physiologically relevant, showed a decreasing magnitude with increased CB concentrations, with a resistive-like behavior in the range 1 kHz-1 MHz and a capacitive-like behavior for frequencies <1 kHz and >1 MHz. Overall, the impedance of the nanocomposite hydrogels decreased with increased CB concentrations. Together, these nanocomposite hydrogels are compositionally, morphologically, mechanically, and electrically similar to native ECMs of many tissues. These gelatin-chitosan-carbon black nanocomposite hydrogels show great promise for use as conducting substrates for the growth of electro-responsive cells in tissue engineering.

Energy‐Dissipative Hydrogels: A Promising Material for Tissue Regeneration†

Comprehensive SummaryHydrogels are promising candidates for mimicking native extracellular matrix (ECM) and are therefore widely adopted as scaffolds in tissue engineering. However, conventional hydrogels composed of static networks are prone to permanent structural damages and lack the ability to provide the time‐dependent mechanical cues, which are essential for cell development, ECM remodeling, and tissue regeneration. The recent substantial development in the structurally dynamic hydrogels with energy‐dissipative ability has demonstrated the unique capability of such viscoelastic hydrogels to withstand extreme biomechanical loads and regulate cellular behaviors not present in classical hydrogels. This review starts with the general design principles for energy‐dissipative hydrogels, followed by recent advancements in fabrication approaches for energy‐dissipative hydrogels. We then highlight some applications of energy‐dissipative hydrogels in tissue engineering, including bone and cartilage regeneration, vessel regeneration, nerve regeneration, and wound healing. Finally, we discuss about the key current challenges and future development of energy‐dissipative hydrogels for biomedical applications.