Hydrogel Soft Contact Research Articles

Epidemiological survey of two morphotypes of Demodex folliculorum (Prostigmata: Demodicidade) in young people from southern Spain

Different morphotypes of Demodex from humans have been described. Among them, molecular studies have made it possible to discern between the Demodex folliculorum and Demodex brevis. Further studies showed two morphotypes of D. folliculorum harboured two different habits (human skin and human eyelashes), both of them with finger-shaped terminal opisthosoma difficult to differentiate and that can be assigned to D. folliculorum,Thus, a complete morphometric study of the species, which in this study are referred to as Demodex folliculorum species complex, was carried out. From this morphometric and meristic study two distinct morphological forms (short and long) could be identified within the Demodex folliculorum species complex. These forms differ significantly in four out of the six biometric parameters we analysed: gnathosomal length and width, podosomal width, and opisthosomal length. Moreover, a comprehensive survey of the two morphotypes from different habitats (skin and eyelashes), was carried out in young people of Southern Spain. Therefore, an analysis of 104 asymptomatic students, which were contact lens wearers, and the presence of D. folliculorum was carried out. A statistical analysis based on Bayesian zero inflated Poisson GLM has been applied to our sample data. For the age group considered (18–24 years old), the overall D. folliculorum prevalence for skin face or eye infections (at least one of them) was 19.31 % (51 people), with a statistically significant higher prevalence in males men. Furthermore, there is a slight statistical correlation between the presence of Demodex in silicone hydrogel soft contact lens wearers. This study confirms: i) the existence of two morphotypes of D. folliculorum that appear segregated due to the parasitization microhabitats,ii) a higher prevalence of mites in men than in women, iii) the existence of a high number of statistically supported double infections (skin-eyelashes). It also provides epidemiological data on the prevalence of long and short forms of D. folliculorum in a healthy young population.

Optical Characterization of Hydrogel and Silicone Hydrogel Soft Contact Lenses

Contact lenses are biomaterials that have emerged as an alternative to glasses in correcting vision defects. In this study, commercial nesofilcon A (hydrogel-Hy) and delefilcon A (silicone hydrogel-SiHy) daily disposable soft contact lenses were optically examined using UV-visible light spectroscopy. Optical absorption and transmittance measurements of the lenses were taken with a UV-visible spectrophotometer, and their properties of blocking the harmful part of the radiation to the eye and transmitting the harmless part were investigated. From the absorption spectrum, it was seen that the nesofilcon A lens absorbed ultraviolet light better. From the optical absorption coefficient spectra of nesofilcon A and delefilcon A lenses, the absorption edges were obtained as 386 and 325 nm, and the optical band gap values were 3.37 and 3.98 eV, respectively. Additionally, the refractive index profiles of the lenses were plotted. The refractive indices of the lenses at 550 nm wavelength were calculated as 1.55 and 1.77 for nesofilcon A and delefilcon A, respectively. While the delefilcon A lens transmitted visible light well, the nesofilcon A lens blocked UV light better and its refractive index was determined to be closer to the 1.40 the value specified by the manufacturer.

Silicone hydrogel versus hydrogel soft contact lenses for differences in patient-reported eye comfort and safety: A Cochrane systematic review summary.

This work is significant because it is the first Cochrane systemic review that compares the comfort and safety of hydrogel and silicone hydrogel soft contact lenses (SCL). This study aimed to conduct a systemic review of randomized trials comparing the comfort and safety of silicone hydrogel and hydrogel SCLs. CENTRAL, MEDLINE Ovid, EMBASE.com, PubMed, LILACS, ClinicalTrials.gov, and World Health Organization International Clinical Trials Registry Platform were searched on or before June 24, 2022, to identify randomized clinical trials that compared silicone hydrogel and hydrogel SCLs. Seven trials were identified and evaluated. One trial reported Ocular Surface Disease Index results, with the evidence being very uncertain about the effects of SCL material on Ocular Surface Disease Index scores (mean difference, -1.20; 95% confidence interval, -10.49 to 8.09). Three trials reported visual analog scale comfort score results, with no clear difference in comfort between materials, although results were of low certainty; trial results could not be combined because the three trials reported results at different time points. None of the included trials reported Contact Lens Dry Eye Questionnaire 8 or Standard Patient Evaluation of Eye Dryness scores. There was no evidence of a clinically meaningful difference (>0.5 unit) between daily disposable silicone hydrogel and hydrogel SCLs in corneal staining, conjunctival staining, or conjunctival redness (very low certainty evidence). The overall evidence for a difference between all included silicone hydrogel and hydrogel SCL trials was of very low certainty, with most trials judged as having a high overall risk of bias. There was insufficient evidence to support recommending one SCL material over the other. Future well-designed trials are needed to generate high certainty evidence to further clarify differences in SCL material comfort and safety.

Subjective Symptoms of First-Time Wearers of Verofilcon A Silicone Hydrogel One-Day Disposable Contact Lenses: A First Time Use of Verofilcon A (FTVeA) Study.

Purpose: Verofilcon A, a new daily disposable silicone hydrogel soft contact lens (SCL), is expected to be more comfortable to wear due to its smooth surface. This study aims to compare the comfort level of verofilcon A with eyeglasses in first-time SCL wearers. Methods: A total of 58 new SCL wearers participated in this study. Participants' comfort scores while wearing glasses or verofilcon A were examined at baseline (glasses) and one and four weeks after starting to wear the SCLs. Results: At the end of the one-month study period, no participants had abandoned wearing the SCLs due to discomfort. The vision scores (1-10) for glasses (baseline) and SCLs (week one, week four) were better withSCLs than glasses in the morning (7.9 ± 1.9 vs 8.9 ± 1.3, 9.0 ± 1.2, p<0.01), during the day (8.0 ± 1.6 vs 9.0 ± 1.1, 8.9 ± 1.2, p<0.01), at the end of the day (7.2 ± 2.1 vs 8.5 ± 1.5, 8.7 ± 1.4, p<0.01), and the entire day (7.7 ± 1.7 vs 8.9 ± 1.2, 8.7 ± 1.3, p<0.01). The percentages of participants who agreed that wearing SCLs at week four was as good as or better than glasses in terms of overall vision, peripheral vision, vision at the end of the day, comfort during the day, comfort at the end of the day, less fatigue during the day, and less fatigue at the end of the day were 91.4%, 100.0%, 91.4%, 89.7%, 82.8%, 87.9%, and 89.7%, respectively. Of the participants, 93.1%, 100.0%, and 93.1% felt that the SCLs were easy to wear, more comfortable than expected, and would like to purchase the same lenses in the future, respectively. Conclusion: These findings suggest that verofilcon A is more comfortable than glasses and is effective as an introductory lens for first-time SCL wearers.

Corneal tissue changes following short-term soft contact lens wear of different materials.

To study the effect of different soft contact lens (CL) materials during short-term wear on corneal tissue. Twenty-two healthy participants wore both silicone hydrogel (MyDay, CooperVision) and hydrogel soft CLs (Biomedics 1day extra, CooperVision) for 8 h per lens. In each session, Scheimpflug images were captured before and immediately after CL removal. Images were analysed using the densitometry distribution analysis, a technique from which two parameters, α (corneal transparency) and β (corneal homogeneity), were estimated. In addition, the central corneal thickness changes after CL wear and the influence of the CL material on corneal transparency were evaluated. The β parameter (homogeneity) increased by 5% after wearing both CL materials (paired t-test, p< 0.001). However, the α parameter (transparency) only increased in half of the participants. No material was found to be more determinant in causing the corneal densitometry changes. Statistically significant but not clinically relevant changes in corneal thickness were observed. Biomarkers of corneal tissue integrity (α and β) were affected by short-term soft contact lens wear. The observed changes in corneal transparency and homogeneity were not clinically relevant but support the importance of participant-material biocompatibility.

Adhesion of Asian Dust Particles to Verofilcon a Soft Contact Lenses.

Asian dust poses a serious global health hazard. Airborne particles adhering to contact lenses may cause substantial damage to the ocular surface. The recently released one-day disposable silicone hydrogel soft contact lens (SCL), the verofilcon A, has a smooth surface with SMARTSURFACE® technology, which is designed to prevent adhesion of protein components and foreign bodies. The purpose of this study was to verify the protective quality of verofilcon A SCL against adhesion of Asian dust particles to its surface. Verofilcon A and etafilcon A (control lens) SCLs were used (n=16 per group), and 0.2 mL of physiological saline containing 0.01 mg/mL of Asian dust particles was dropped on the surface of SCLs, allowed to stand for 1 hour, shaken for 1 minute, and rinsed three times with saline (after rinsing). In addition, the samples were agitated by a vortex mixer for 1 minute and rinsed three times with saline (after vortex). The number of Asian dust particles adhering to the SCLs and percentage of the surface area occupied by the Asian dust particles was determined before washing, after rinsing, and after vortexing. The number of adherent Asian dust particles was lower on verofilcon A SCL (297 ± 116 after rinsing, and 5 ± 14 after vortexing) than on etafilcon A SCL (523 ± 212 after rinsing, p=0.003, and 378 ± 268 after vortexing, p<0.001). The Asian dust adhesion area was also lower on verofilcon A SCL (3.6 ± 2.3% after rinsing and 0.0 ± 0.1% after vortexing than on etafilcon A (10.2 ± 2.1% after rinsing, p=0.002, and 5.2 ± 3.0% after vortexing, p<0.001). These findings indicate that verofilcon A SCL has the property of low adhesion of Asian dust particles. Verofilcon A SCL can be recommended for SCL wearers during windy and Asian dust days.

A Composite System Based upon Hydroxypropyl Cyclodextrins and Soft Hydrogel Contact Lenses for the Delivery of Therapeutic Doses of Econazole to the Cornea, In Vitro.

Fungal keratitis, a disease in which the cornea becomes inflamed due to an invasive fungal infection, remains difficult to treat due in part to limited choices of available treatments. Topical eye drops are first-line treatment, but can be ineffective as low levels of drug reach the target site due to precorneal losses and the impenetrability of the cornea. The aim of this study was to determine the corneal delivery of econazole using a novel topical enhancement approach using a composite delivery system based upon cyclodextrins and soft hydrogel contact lenses. Excess econazole nitrate was added to hydroxypropyl-α-cyclodextrin (HP-α-CD) and hydroxypropyl-β-cyclodextrin (HP-β-CD) solutions, and the solubility determined using HPLC. Proprietary soft hydrogel contact lenses were then impregnated with saturated solutions and applied to freshly enucleated porcine eyeballs. Econazole nitrate ‘eye drops’ at the same concentrations served as the control. After 6 h, the corneas were excised and drug-extracted, prior to quantification using HPLC. Molecular dynamic simulations were performed to examine econazole–HP-β-CD inclusion complexation and dissociation. The minimum inhibitory concentration (MIC) of econazole was determined against four fungal species associated with keratitis, and these data were then related to the amount of drug delivered to the cornea, using an average corneal volume of 0.19 mL. The solubility of econazole increased greatly in the presence of HP-β-CD and more so with HP-α-CD (p < 0.001), with ratios >> 2. Hydrogel contact lenses delivered ×2.8 more drug across the corneas in comparison to eye drops alone, and ×5 more drug delivered to the cornea when cyclodextrin was present. Molecular graphics demonstrated dynamic econazole release, which would create transient enhanced drug concentration at the cornea surface. The solution-only drops achieved the least satisfactory result, producing sub-MIC levels with factors of ×0.81 for both Fusarium semitectum and Fusarium solani and ×0.40 for both Scolecobasidium tshawytschae and Bipolaris hawaiiensis. All other treatments delivered econazole at > MIC for all four fungal species. The efficacies of the delivery platforms evaluated were ranked: HP-α-CD contact lens > HP-β-CD contact lens > contact lens = HP-α-CD drops > HP-β-CD drops > solution-only drops. In summary, the results in this study have demonstrated that a composite drug delivery system based upon econazole–HP-β-CD inclusion complexes loaded into contact lenses can achieve significantly greater corneal drug delivery with the potential for improved clinical responses.

True Story of Poly(2-Hydroxyethyl Methacrylate)-Based Contact Lenses: How Did It Really Happen

Soft hydrogel contact lenses represent the most famous and commercially successful application of poly(2‑hydroxyethyl methacrylate). The scarcely crosslinked network of this hydrophilic polymer finds its use also in many other fields, be it in (bio)medicine or technology. Moreover, the polymer itself and its crosslinked forms, discovered more or less serendipitously in the early fifties by a group of Czech chemists, is extremely interesting due to its exceptional properties: it readily swells in water, is optically clear, soft, biologically compatible, sufficiently strong, stable, gas-permeable, cheap, and easy to produce. Looking for its as-yet undiscovered qualities and possible utilization still continues. The story of the invention of hydrogel contact lenses was referred to many times in various literary sources which, however, contain numerous errors and misinterpretations. In the present article, we put these records straight and present the correct chronology of the hydrogel contact lenses development including the dramatic patent litigation. A brief overview of the chemical nature, properties, and applications of the constitutive substance of the lenses, i.e., the hydrophilic methacrylate, is also given.

Itraconazole Nanocrystals on Hydrogel Contact Lenses via Inkjet Printing: Implications for Ophthalmic Drug Delivery

The therapeutic effect of common ocular drug delivery systems is often limited because tear fluid, protective biological barriers, and the blink reflex prevent drugs from reaching their target. Combining nanodrug delivery systems with contact lenses is one approach to increase the precorneal residence time and thus the drug concentration in the eye. Hence, the aim of this study was to selectively print itraconazole (ITZ) nanocrystals on commercially available 1 day soft hydrogel contact lenses using inkjet printing. For this, ITZ nanocrystals stabilized with Poloxamer 407 were prepared and optimized via wet media milling. After careful characterization, the nanocrystals were printed into vials, the printing process was adjusted, and the characteristics of the nanoformulation after printing were investigated. Finally, nanocrystals were printed onto hydrogel contact lenses. By performing a concise design of experiments (DoE), stable nanocrystals with a size of approximately 200 nm, a narrow particle size distribution, a negative surface charge, and an almost spherical shape were obtained. Compared to the bulk material, the apparent solubility was significantly increased and no changes in the solid-state behavior occurred. It was further demonstrated that inkjet printing did not affect the characteristics of the nanocrystals. Multiple layers of the ITZ nanoformulation were printed on soft hydrogel 1 day contact lenses, and a dual drug release profile was obtained in simulated tear fluid. These results clearly show that printing on contact lenses is a promising application for ophthalmic drug delivery.

Controlled release of naringenin from soft hydrogel contact lens: An investigation into lens critical properties and in vitro release

The naringenin (NAR)-impregnated hydrogel lenses (nesofilcon A material) were manufactured in this study with the feasibility to achieve controlled daily drug release. The lenses were fabricated using a comparable commercial-standard process, utilizing injection molding and thermal curing approaches. NAR-loaded lenses were prepared by both direct entrapment and ‘soak and release’ methods. Their critical properties were tested to ISO standards and comparable to the commercial lenses. NAR was fully characterized by studying its physical and chemical stability throughout the manufacturing processes using thermal analysis, high performance liquid chromatography and X-ray diffraction analysis. The NAR-loaded lenses showed > 97% light transmission, >75% water content, 0.50–0.53 ± 0.06 MPa tensile strength, with a lens diameter of 14.1 ± 0.1 mm. Lens polymerization kinetics were studied using differential scanning calorimetry. NAR released from the lens, prepared by a direct entrapment approach, followed a diffusion-controlled mechanism, and provided a controlled drug release of 72–82% for 24 h. A faster release rate was observed for NAR-loaded lenses prepared by a soak and release method, with over 90% of NAR was releasedin the first five hours.

Brinzolamide-loaded soft contact lens for ophthalmic delivery.

Aim: In this study, brinzolamide (BRZ) was loaded in balafilcon A silicone hydrogel soft contact lens to enhance delivery in glaucoma therapy. Materials & methods: BRZ-loaded soft contact lens was prepared by the soaking method with optimization of pH, temperatureand concentration of drug loading solution. Results: At pH 7.4, loading temperature and concentration of 32°C and 3mg/ml, respectively, enhanced drug loading capacity and release wereobserved. Diffusional experiments showed Higuchi model of release. BRZ loading brought no appreciable changes in the physical properties of soft contact lens, likewise, maintaining stability. Conclusion: The results demonstrated BRZ loading and delivery through silicone hydrogel soft contact lens which provides a potential alternative in glaucoma therapy.

Use of Autologous Serum Eye Drops with Contact Lenses in the Treatment of Chemical Burn-Induced Bilateral Corneal Persistent Epithelial Defects.

Objective We aim to evaluate the clinical effect of combined topical 20% autologous serum eye drops (ASEs) along with silicone–hydrogel soft contact lenses (SCLs) in the treatment of chemical burn-induced bilateral corneal persistent epithelial defects (PEDs) and to review the literature of related studies. Methods From January 1, 2017, to December 31, 2019, we conducted a retrospective chart review of 8 patients with chemical burn-induced bilateral corneal PEDs who were unsuccessfully treated with conventional medical therapy and were then treated with combined topical 20% (v/v) ASEs and silicone–hydrogel CLs. The clinical effects and effectiveness of the combined treatment were evaluated. Results The bilateral corneal PEDs healed in all sixteen eyes of the eight patients within 2 weeks. The patients did not report any discomfort associated with the combined treatment. Improved ocular comfort/visual acuity and decreased conjunctival injection correlated with healing. No recurrent corneal epithelial breakdown was noted during the 3-month posttreatment follow-up. Conclusions The combined treatment of silicone–hydrogel CLs and ASEs can help to stabilize the ocular surface and successfully treat chemical burn-induced bilateral corneal PEDs. It may be considered as an alternative treatment method for patients with bilateral chemical burn-induced corneal PEDs with potential corneal melting.

Changes in visual quality with soft contact lenses after the instillation of hyaluronic acid eye drops

PurposeTo evaluate the changes in visual function and anterior surface aberrations during soft contact lens (SCL) wear after the instillation of hyaluronic acid (HA) eye drops with different viscosity. MethodsA prospective, randomized, and participant-masked study was performed. Twenty healthy participants (25.4 ± 2.6 years) were evaluated. Hydrogel (Ocufilcon D) and silicone-hydrogel (Somofilcon A) SCL were randomly assigned to both eyes of the same participant. Visual function in terms of high- and low-contrast corrected distance visual acuity (CDVA) and anterior contact lens surface aberrations (RMS HOA) were measured before and after the instillation, at different times, of different eye drops: saline (control) and 0.1%, 0.2%, and 0.3% HA. ResultsCompared with the saline solution, during hydrogel SCL wear, there was an improvement (P < 0.05) in high-contrast CDVA after 3 and 10 min with 0.1% HA, and after 5 and 20 min with 0.2% HA. During silicone-hydrogel SCL wear, there was a deterioration (P < 0.05) in high-contrast CDVA after 1 and 30 min with 0.3% HA. Additionally, during silicone-hydrogel SCL wear, there was also a deterioration (P < 0.05) in low-contrast CDVA after 5 and 20 min with 0.3% HA. In terms of RMS HOA, there were no clinically relevant changes with both SCL. ConclusionsThe instillation of HA eye drops could have a different effect on visual quality depending on their concentration of HA, the contact lens material, its surface ionicity, or other physicochemical properties that should be studied in future studies.

Silicone hydrogel versus hydrogel soft contact lenses for differences in patient-reported eye comfort and safety

Silicone hydrogel versus hydrogel soft contact lenses for differences in patient-reported eye comfort and safety

Shape of the anterior surface of the cornea after extended wear of silicone hydrogel soft contact lenses.

To measure geometrical changes in the anterior surface of the cornea after wearing silicon hydrogel (SiH) soft contact lenses continuously for 1week. Forty-three eyes with 3.0D of myopia and 22 eyes with 3.0D of hyperopia were enrolled in the prospective, interventional study. All subjects underwent a general eye examination, corneal tomography with wavefront aberration analysis, corneal thickness measurements and epithelial thickness mapping before and after wearing SiH lenses (Acuvue Oasys) for 7days. No significant changes in average keratometry were observed in either refractive group. In the myopic group, keratometry findings for the flat meridian (K1) and central corneal thickness decreased significantly. After +3.0 D lens wear in the hyperopic group, a significant decrease in epithelial thickness up to 3.19µm was observed in the central and paracentral cornea, (p<0.001). In both refractive groups, the largest epithelial thickness increase was seen in the periphery. A decrease in spherical aberration was noted in myopic eyes, while an increase of both higher order corneal aberrations and coma was found in hyperopic subjects. Extended wear of SiH lenses results in a significant change in epithelial thickness leading to alteration in the geometry of the anterior surface of the cornea, particularly in hyperopic patients. These epithelial thickness variations lead to changes in the higher order aberrations of the cornea.

Adhesion of Pollen Particles to Daily Disposable Soft Contact Lenses.

PurposePollen and proteins attached to soft contact lenses (SCLs) exacerbate allergic conjunctivitis. The material of SCLs may affect the pollen adhesion to the SCLs. The factors associated with the number of pollen particles that are adherent to daily disposable SCL were investigated.MethodsPollen particles were experimentally exposed to the contact lens surface of 12 types of SCLs for 1 hour, and the SCLs were washed and rinsed with a physiological saline (n=10 for each SCL type). A total of 120 contact lenses were used in this study. The pollen particles attached to the SCL were observed and photographed under a microscope. The influence of the materials of the SCLs on the degree of pollen adhesion were investigated.ResultsThe number of residual pollen particles attached to SCLs was in the range from 0–293/area of 200×200 µm. Percentage of pollen adhesion area of the surface of the SCL was in the range from 0.01% to 3.25%. There were significant differences in both the number and adhesion area of pollen particles among the 12 types of SCLs tested (P<0.0001 and P<0.0001, respectively). The number of pollen particles adhered to SCLs was significantly higher in colored SCLs than clear SCLs (unpaired t-test, p<0.001). The portion of pollen adhesion area was the lowest in the silicone hydrogel SCLs made with delefilcon-A (0.01 ± 0.02%).ConclusionPollen adhesion in daily disposable SCLs depends on the characteristics and materials of the SCLs and was high in colored SCLs and lowest in delefilcon-A silicone hydrogel SCL. These results suggest that colored SCLs are not preferred during pollen season.

Change in the geometry of positive- and negative-powered soft contact lenses during wear.

Contact lens wear causes mutual interactions between the ocular surface and the lens, which may affect comfort as well as vision. The aim of this study was to examine deformations in modern positive- and negative-powered silicone hydrogel soft contact lenses (SiH SCLs) after 7 days of continuous wear. This pre-post interventional study included 64 eyes: 42 eyes with myopia of -3.00 D and 22 eyes with hyperopia of +3.00 D. All patients underwent general ophthalmic examination, corneal topography/tomography, total corneal and epithelial thickness mapping, and specular microscopy before and after the wearing period. SiH SCLs made of senofilcon A were worn continuously for 7 days on all eligible eyes. The geometry of the new and used lenses was measured 3 to 6 minutes after removal in two perpendicular planes using a custom-made swept source optical coherence tomography (SS-OCT) system for in vitro measurements. The anterior and posterior radii of curvature decreased in -3.00 D lenses in two perpendicular planes. This effect correlated significantly with average keratometry of the cornea. Sagittal lens height was lower in +3.00 D lens after wear, which correlated moderately with the corneal sagittal height. A significant decrease in central corneal epithelial thickness was observed after wearing +3.0 D lenses. In conclusion, SiH SCLs made of senofilcon A undergo minor deformations after 7-day continuous wear. Geometry modifications are different for -3.00 D and +3.00 D lenses, and they imitate the shape of the anterior eye surface. These geometric changes are accompanied by a decrease in the central thickness of corneal epithelium after +3.00 D lens wear.

Amphiphilic polymer co‐networks: 32 years old and growing stronger – a perspective

AbstractThis brief perspective overviews amphiphilic polymer co‐networks (APCNs), polymeric chemically crosslinked hydrogels also covalently hosting a hydrophobic segment, conferring upon these materials the important property of internal self‐organization in aqueous environments. APCN synthesis is most conveniently accomplished via the random crosslinking copolymerization of a hydrophilic monomer with a hydrophobic macro‐crosslinker, whereas better structures are attained via the end‐linking of amphiphilic linear ABA triblock copolymers or amphiphilic star diblock copolymers. Microphase‐separated morphologies, translucency‐to‐transparency, biocompatibility, low to moderate aqueous swelling, fair mechanical strength and possible stimulus‐responsiveness constitute the main physicochemical properties of APCNs, with their major commercial application being in silicone hydrogel soft contact lenses. Modeling the swelling, morphological and mechanical behavior of these intriguing materials is an area where more progress is necessary in order to improve our understanding of these networks and facilitate the design of next‐generation APCNs. © 2020 Society of Industrial Chemistry

Evaluation of In Vitro Wettability of Soft Contact Lenses Using Tear Supplements

To evaluate the interaction between tear supplements and soft contact lenses (SCLs), we measured the contact angles (CAs) on the SCLs using commercially available tear supplements. We used four daily disposable conventional hydrogel lenses (etafilcon A, etafilcon A+ polyvinylpyrrolidone, nelfilcon A, and omafilcon A containing 2-methacryloyloxyethyl phosphorylcholine [MPC]) and four silicone hydrogel lenses (narafilcon A, senofilcon A, delefilcon A, and stenfilcon A). The CAs on the SCLs were measured using a sessile drop technique and four different types of sessile drops, including saline, artificial tears, lubricants containing 2-MPC (MPC solution), and 0.1% hyaluronate acid (HA). The CA values associated with the silicone hydrogel lenses were significantly (P<0.001) lower than those associated with the conventional hydrogel lenses with all four solutions. The mean CA of 0.1% HA was significantly (P<0.01) higher than that of saline. The mean CA of the MPC solution was significantly (P<0.01) lower than that of saline with the conventional hydrogel lenses but significantly (P<0.05) higher than that of saline with the silicone hydrogel lenses. The CAs associated with the silicone hydrogel SCLs were higher with the use of the MPC solutions and HA in vitro. The measured CAs may depend on ingredient agents, surface treatment of the CLs, and components of the tear supplements.

Performance and Safety of Silicone Hydrogel Soft Contact Lenses

Performance and Safety of Silicone Hydrogel Soft Contact Lenses