Hydrogel Ophthalmic Lenses Research Articles

Analysis of Physical and Antibacterial Properties of Functional Silicone Hydrogel Ophthalmic Lenses Containing Graphene Groups

Analysis of Physical and Antibacterial Properties of Functional Silicone Hydrogel Ophthalmic Lenses Containing Graphene Groups

Poly (Ethylene Glycol) Methyl Ether Methacrylate-Based Hydrogel and Cerium(IV) Oxide Nanoparticles as Ophthalmic Lens Material.

The functional hydrogel lens containing 2-hydroxyethylmethacrylate (HEMA) was manufactured by thermal polymerization. The physical properties of the produced hydrogel lens were measured and analyzed. In this study, HEMA, ethylene glycol dimethacrylate (EGDMA), and azobisisobutyronitrile (AIBN) were used for thermal copolymerization. Additionally, poly (ethylene glycol) methyl ether methacrylate (PEGMEMA), 3-(Triethoxysilyl) propyl isocyanate (TEPI), and cerium(Ⅳ) oxide nanoparticles were used as additives to make a functional hydrogel lens. The mixture was heated at 100 °C for 90 min to produce the hydrogel ophthalmic lens by the cast mold method. The resulting physical properties showed that the water content and refractive index of the sample were in the ranges of 38.06~42.11% and 1.426~1.436, respectively. The addition of cerium oxide nanoparticles lowered the contact angle and allowed the hydrogel lens to block UV light. The tensile strength was also improved by 52.13% through cerium oxide nanoparticles, and up to 123.4% by using TEPI. Based on the results of this study, the produced ophthalmic lens is suitable for durable, UV-blocking high-performance lenses.

Polyhedral Oligomeric Silsesquioxane Based Silicone Ophthalmic Contact Lens Material Containing Neodymium Nanoparticles.

This research was conducted to analyze the compatibility of used monomers and produce the high functional POSS-based ophthalmic polymer containing silicone monomers and neodymium nanoparticle. Synthesized silicone polymer (SiD), trimethylsilylmethacrylate (TSMA), N-vinyl-2-pyrrolidone (NVP) and neodymium nanoparticles were used as additives for the basic combination of polyhedral oligomeric silsesquioxane (POSS), and methyl methacrylate (DMA). And also, the materials were copolymerized with ethylene glycol dimethacrylate (EGDMA) as the cross-linking agent, azobisisobutyronitrile (AIBN) as the initiator. It is judged that the POSS-co-NVP polymer is optically good and thus have good compatibility. Especially copolymerization with TSMA showed high oxygen permeability, but with SID considered to be more stable judging by lens shape. Physical properties shows that the neodymium nanoparticle increases the wettability while maintaining water content. These materials are considered to make synergy effect each other, so it can be used in functional hydrogel ophthalmic lenses.

Preparation and Analysis of Functional Silicone Hydrogel Lenses Containing ZrO₂ and Antimony Tin Oxide Nanoparticles.

This study prepared silicone hydrogel ophthalmic lenses using 2-hydroxyethylmethacrylate (HEMA), synthesized silicone monomer (SID), dimethylarsinic acid (DMA), N-hydroxyethyl acrylamide (HEA), ethylene glycol dimethacrylate (a crosslinking agent, EGDMA), and azobisisobutyronitrile (an initiator, AIBN). Also, Zirconium oxide (ZrO₂), antimony tin oxide (ATO) nanoparticles were added to the silicone hydrogel material to analyze the characteristics of the nanoparticles. The mixture was heated at 130 °C for 2 hours to produce the ophthalmic contact lens by cast mould method. As a result, the manufactured silicone hydrogel lens was prepared having high oxygen permeability and tensile strength while satisfying the basic requirements of ophthalmic hydrogel lens materials. Also, the addition of ZrO₂ NPs increased tensile strength of the manufactured lens, and ATO NPs were found to improve wettability. Therefore, ZrO₂ and ATO nanoparticles can be used effectively as additives for functional ophthalmic silicone hydrogel lenses.

Copolymerization of Acrylic Monomers and Silane Group Containing Titanium Carbide Nanoparticles for Application to Ophthalmic Lens Materials.

This research was conducted to synthesis and application for high oxygen permeable ophthalmic lens materials. 2-(Trimethylsiloxy)ethyl methacrylate (2T), 3-[Tris(trimethylsiloxy)silyl]propyl methacrylate (3T), [(1,1-Dimethyl-2-propynyl)oxy]trimethylsilane (TMS), Poly(ethylene glycol) methyl ether methacrylate (PEGMA), N-vinyl-2-pyrrolidone (NVP) and titanium carbide nanoparticles were used as additives for the basic combination of synthesized silicone monomer (SiD) and N,N-Dimethylacetamide (DMA). And also, the materials were copolymerized with ethylene glycol dimethacrylate (EGDMA) as the cross-linking agent, azobisisobutyronitrile (AIBN) as the initiator. The copolymerization with a small amount of silane of about 1% increased the oxygen permeability to 30.3˜33.52(cm²/sec)·(mlO₂/ml·mm Hg)·10-11, and in particular, the addition of titanium carbide nanoparticles was found to increase to 46.38 (cm²/sec)·(ml O₂/ml·mm Hg)·10-11. Surface modification was possible with various wetting agents. Especially, simultaneous use with titanium carbide nanoparticles increased the wettability while maintaining water content. These materials are considered to make synergy effect each other, so it can be used in functional hydrogel ophthalmic lenses.

Characterization and Compatibility of High Oxygen Permeable Ophthalmic Biomaterial Containing Silane with Cobalt Oxide Nanoparticles.

This research is conducted to analyze the compatibility of used monomers and produce the high functional hydrogel ophthalmic polymer containing silane and nanoparticles. Vinyltrimethoxysilane (VTMS) and cobalt oxide nanoparticles are used as additives for the basic combination of silicone monomer (Sil-H) and methyl methacrylate (MMA). And also, the materials are copolymerized with ethylene glycol dimethacrylate (EGDMA) as the cross-linking agent, photo polymerization initiator (2H2M) as the initiator. It is judged that the lenses of all combinations are optically excellent and thus have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic ophthalmic polymer are different in each case. Especially VTMS with cobalt oxide nanoparticle increases the oxygen permeability by the addition of cobalt nanoparticles. These materials are considered to make synergy effect each other, so it can be used in functional hydrogel ophthalmic lenses.

Effects on the Physical Properties of Ophthalmic Hydrogels Containing 4-Chlorostyrene and Cerium Oxide Nanoparticles with Ultraviolet Blocking Ability.

The optical, physical and polymerization property of hydrogel ophthalmic lenses made by cerium nanoparticles containing 4-chlorostyrene as a base hydrogel material were analyzed. Cerium oxide nanoparticles were used as additive. And HEMA, 4-chlorostyrene and a cross-linker EGDMA were copolymerized in the presence of AIBN as an initiator. Also, the polymerization property such as TGA and absorbance of the prepared lens were measured. Measurement of the polymerization characteristics of the copolymerized material showed that TGA was found that the addition of cerium oxide increased thermal stability. The physical properties of the basic lenses were totally satisfied and breaking strength gradually increased with the addition amount of 4-Chlorostyrene. Cerium nanoparticles are considered to satisfy the basic requirements of hydrogel lenses and UV-blocking amount gradually increased according to the addition ratio of cerium oxide nanoparticles without affecting the basic physical properties. Therefore, these materials can be used effectively as additives for ophthalmic hydrogel lenses.

Preparation and Properties of Silicone Hydrogel Material Containing Silane Group with Cobalt Oxide Nanoparticles through Thermal Polymerization

This research is conducted to analyze the compatibility of used monomers and produce the high functional hydrogel ophthalmic polymer containing silane and nanoparticles. VTMS (vinyltrimethoxysilane), TAVS [Triacetoxy(vinyl)silane] and cobalt oxide nanoparticles are used as additives for the basic combination of SilM (silicone monomer), MMA (methyl methacrylate) and MA (methyl acrylate). Also, the materials are copolymerized with EGDMA (ethylene glycol dimethacrylate) as cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the lenses of all combinations are optically excellent and thus have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic ophthalmic polymer are different in each case. Especially for TAVS, the addition of cobalt oxide nanoparticles increases the oxygen permeability. These materials are considered to create synergy, so they can be used in functional hydrogel ophthalmic lenses.

Standardization Study of Extraction Tests over Hydration Time for Hydrogel Ophthalmic Lenses

Standardization Study of Extraction Tests over Hydration Time for Hydrogel Ophthalmic Lenses

Polymerization and Preparation of High Functional Ophthalmic Lens Material Containing 2-Fluoro Styrene with Si and Ag Nanoparticles

This research was conducted to produce the high functional silicone hydrogel ophthalmic lens containing styrene group and nanoparticles. 2F (2-fluorostyrene) was added to enhance polymerization stability during lens formation, Si and Ag nanoparticles were used as additives for the basic combination including Sil-H (Silicone monomer), TSMA (Trimethylsilyl methacrylate), DMA (N,N-Dimethylacetamide) and MMA (methyl methacrylate). And also, the materials were copolymerized with EGDMA (ethylene glycol dimethacrylate) as the crosslinking agent and AIBN (azobisisobutyronitrile) as the initiator. Measurement of the physical, optical, surface and antimicrobial characteristics of the produced material showed the possibility of utilization as an opthalmic contact lens. As a result of the polymerization stability measurement, no significant difference was observed in all the samples, so it can be judged that the stabilization of nanoparticles in the polymer was maintained. Therefore, these materials are expected to satisfy the basic requirements of ophthalmic lenses and used usefully as an antimicrobial material for silicone hydrogel ophthalmic lens.

Preparation and Performance Analysis of Ophthalmic Polymer Using SWCNT and SWCCNT

The purpose of this study is to fabricate an ophthalmic lens by copolymerizing two types of carbon nanotubes and hydrophilic hydrogel lens materials, and to investigate its application as an ophthalmic lens material by analyzing its physical properties and antimicrobial effect. For polymerization, HEMA (2-hydroxyethyl methacrylate), EGDMA (ethylene glycol dimethacrylate), a crosslinking agent, and AIBN (azobisisobutyronitrile), an initiator, are used as a basic combination, and a single-walled carbon nanotube and a single-walled, carboxylic-acid-functionalized carbon nanotube are used as additives. To analyze the physical properties, the water content, refractive index, breaking strength, and antimicrobial effect of the fabricated lenses are measured. The fabricated lenses satisfies all the basic properties of the basic hydrogel ophthalmic lens. The water content increases with increasing amount of additive and decreases with addition of 0.2% ratio of nanoparticles. The refractive index is inversely proportional to the water content result. As a result of the antimicrobial test of the fabricated lens, the addition of carbon nanotubes shows an excellent antimicrobial effect. Therefore, it is considered that the fabricated lens can be applied as a functional material for basic ophthalmic hydrogel lenses.

Preparation and Characterization of High Functional Ophthalmic Lens Material Containing Acrylic Formation Isocyanate Group with Carbon Nanoparticles.

This research was conducted to produce the high functional hydrogel ophthalmic lens containing iso-cyanate group and nanoparticles. IsoMA (2-Isocyanatoethyl methacrylate) and carbon nanoparticles were used as additives for the basic combination including HEMA (2-hydroxyethyl methacrylate), MA (methacrylic acid), and MMA (methyl methacrylate). And also, the materials were copolymerized with EGDMA (ethylene glycol dimethacrylate) as the cross-linking agent and AIBN (azobisisobutyronitrile) as the initiator. Measurement of the physical characteristics of the produced material showed that the refractive index was 1.4027~1.4446, water content 31.13~44.01%, contact angle 43.99~65.67°, visible light transmittance 26.17~92.13%, and tensile strength 0.0652~0.2528 kgf. The breaking strength were in the range of 0.0872~0.1851 kgf. These results showed the decrease of contact angle and increase of water content by the addition of IsoMA and carbon nanoparticles and that showing both additives made synergy effect of wettability. As a result of the absorbance measurement, no significant difference was observed in all the samples, so it can be judged that the stabilization of nanoparticles in the polymer was maintained. Therefore, these materials considered to satisfy the basic requirements of ophthalmic lenses with high performance of tensile strength, breaking strength and wettability.

Preparation and Characterization of Functional Ophthalmic Polymer Containing Nanoparticles Using Heat Treatment Method After Polymerization

The functional hydrogel lens containing HEMA (2-hydroxyethylmethacrylate) was manufactured by thermal polymerization and heat treatment method after room temperature polymerization, respectively. In this study, HEMA, EGDMA (ethylene glycol dimethacrylate) and the initiator AIBN (azobisisobutyronitrile) were used for thermal copolymerization and the mixture was heated at 100 °C for 1 hour. And also, HEMA, EGDMA, the initiator and distilled water were used for heat treatment method after room temperature copolymerization and the mixture was heated 80 °C for 1 hour and then treated at 100 °C for 1 hour to produce the hydrogel ophthalmic lens by cast mold method. To make the functional hydrogel lens, ZnPC and platinum octaethyl porphyrin were used as additives. The measurements of the physical characteristics of the copolymerized material showed that refractive index and contact angle of sample was in the range of 1.4010∼1.4585 and 21.46∼87.28°, respectively. In case of heat treatment method after room temperature copolymerization, the refractive index and wettability of sample was higher than that of thermal polymerization. And also, the addition of ZnPC nanoparticles allowed the hydrogel lens to block UV-light. The absorbance value of solution in which the lens prepared by the heat treatment method was immersed were much lower than that of thermal polymerization, so it can be judged that the stabilization of produced polymer maintained well. Based on the results of this study, the produced optical lens can be considered to satisfy the basic requirements of optical lens and can be used effectively as an additive for functional ophthalmic lens material with high refractive index and wettability.

Comparative Study of Polymerization Environment for Hydrogel Ophthalmic Lens

This study is carried out to evaluate the commercial feasibility of the room temperature and thermal polymerization method as a lens manufacturing method. All samples are found to be transparent after polymerization, thereby indicating that their physical and surface properties are suitable for hydrogel ophthalmic lenses. The optical and physical properties of the lenses are compared. The water content of the samples that are prepared via a room temperature polymerization process decreases with the addition of MMA as compared to the water content of the samples that are prepared via thermal polymerization. When MMA and DMA are used as an additive for improving functionality, the wettability of the lenses increases. By measuring the AFM, the surface roughness is shown to improve more than MMA and DMA. Therefore, it is judged to be an appropriate process for manufacturing hydrogel lenses with high functionality.

Preparation and Physical Properties of Silicone Hydrogel Ophthalmic Lens Containing Hydrophilic Monomer

The major physical characteristics of macromolecules used in silicone hydrogel ophthalmic lenses include optical transmittance, oxygen permeability, water content, and refractive index. For the preparation of highly functional silicone hydrogel lens materials, two silicone monomers were used in the presence of 2-hydroxyethyl methacrylate (HEMA) and hydroxypropyl methacrylate (HPMA). The samples containing HEMA and HPMA had oxygen transmissibility (Dk) values in the range of 73.38–50.98 × 10^-11 (cm²/s) (mLO₂/mL×mmHg) and 71.94–42.80 × 10^-11 (cm²/s) (mLO₂/mL×mmHg), respectively. Furthermore, the water contents of samples containing HEMA and HPMA were in the range of 32.73–34.67% and 31.94–33.74%, respectively, and the refractive indices were in the range of 1.4348–1.4364 and 1.4385–1.4407, respectively. Thus, silicone monomers containing HEMA and HPMA are expected to be useful for fabricating high-oxygen-permeability silicon hydrogel ophthalmic lenses.

Preparation and Characterization of Ophthalmic Lens Materials Containing Titanium Silicon Oxide and Silver Nanoparticles.

Hydrogel ophthalmic lenses containing fluorine-substituted aniline group, titanium silicon oxide nartoparticles, and silver nanoparticles were copolymerized, and the physical and optical properties of the hydrogel lenses were measured. To produce the hydrophilic ophthalmic lenses, the additives were added to the mixture containing HEMA, NVP, MA, EGDMA, and AIBN. The cast mold method was used for the manufacture of the hydrogel ophthalmic lenses, and the produced lenses were completely soaked in a 0.9% NaCl normal saline solution for 24 hours for hydration. The physical properties of the produced macromolecule showed that the water content was 32.5-37.6%, the refractive index was 1.450-1.464, the UV-B transmittance was 0.5-35.2%, and the contact angle was between 56 and 69°. Also, the addition of aniline, titanium silicon oxide, and silver nanoparticles allowed the ophthalmic lenses to block UV. These results show that the produced macromolecule can be used as hydrophilic lenses for ophthalmologic purposes that can block UV.

하이드로젤 친수성 렌즈에서 할로겐 원소로 치환된 아닐린 그룹의 물리적 및 광학적 영향

하이드로젤 친수성 렌즈에서 할로겐 원소로 치환된 아닐린 그룹의 물리적 및 광학적 영향

Physical and Optical Properties of Hydrophilic Tinted Lens Materials with the Fluoro-substituted Aniline Group

The physical and optical properties of polymers with 2-fluoroaniline and 4-fluoroaniline added, which can be used for hydrophilic ophthalmic lenses, were investigated in this study. The UV-blocking properties of 2- and 4-fluoroaniline were also investigated by measuring their UV transmissibility. 2- and 4-Fluoroaniline were used as additives for the basic combination of HEMA, 5% AA, and 1% MMA, and the materials were copolymerized with EGDMA as the cross-linking agent and AIBN as the initiator. The refractive index, water content, optical transmittance, tensile strength, and contact angle were measured to evaluate the physical properties of the produced hydrogel lens. The measured physical properties of the hydrogel contact lens produced with the copolymerized polymer showed a refractive index of 1.425-1.436; a water content of 36.95-44.65%; a visual light transmittance of 66.0-81.0%; a tensile strength of 0.138-0.281 kgf; and a contact angle of <TEX>$55.02-57.87^{\circ}$</TEX>. The UV transmissibility was significantly reduced, which indicates that 2-fluoroaniline and 4-fluoroaniline have UV-blocking properties. This study showed that 2- and 4-fluoroaniline are expected to be used as UV-blocking materials in hydrogel ophthalmic lenses whose physical properties, such as their refractive index and water content, do not change.

Effects of Ag/Pt Nanoparticles on the Physical Properties of Copolymers Containing 2-Fluoro-5-Methylanisole

The ophthalmic materials must satisfy the optical requirements, physical and chemical stability and fulfill biological requirements, such as biocompatibility to be used in hydrogel ophthalmic lenses. Polymeric materials for hydrogel lenses were prepared by the copolymerization of HEMA, NVP, MMA, EGDMA and FMA in the presence of antibacterial Ag and Pt nanoparticles and also the effect of these copolymers containing nanoparticles on oxygen transmissibility was then investigated. The combination where AgNPs were added produced a light-yellowish colored transparent ophthalmic lens. The copolymers containing Ag and Pt nanoparticles did not have significant impact on the water content and refractive index of the hydrogel contact lens, but the Ag/Pt nanoparticles reduced oxygen permeability to a certain extent. Furthermore, the spectral transmittance significantly decreased. The additive, 2-fluoro-5-methylanisole, did not effect significantly on the physical properties of the polymer, but it was able to block UV light to a certain extent. The water content and oxygen permeability slightly increased as the amount of FMAs increased.

Physical Properties of Ophthalmic Hydrogel Polymer Containing Zinc Oxide Nanoparticles

ZnO nanoparticles and vinyl pyridine were added to the mixture of MMA (methyl methacrylate), HEMA (2-hydroxy ethyl methacrylate) and NVP (N-vinylpyrrolidone) in a mould at various concentrations. Cross-linker EGDMA (ethyleneglycoldimethacrylate) and AIBN (azobisisobutyronitrile) initiator were finally added to the mixture and then heated at <TEX>$80^{\circ}C$</TEX> for 60 min to prepare high-performance hydrogel ophthalmic lens. The physical properties of the hydrogel ophthalmic material were investigated by measuring the average value of refractive index, water content and optical transmittance. The refractive index of 1.429~1.450, water content of 34~41%, and visible transmittance of 78~90% were obtained. The material is possibly used to manufacture UV-block hydrogel contact lens.