Hydrogel Coatings Research Articles

An Intelligent Antibacterial Hydrogel Coating with Triple Antifouling–Killing–Releasing Functions for Medical Tubing

An Intelligent Antibacterial Hydrogel Coating with Triple Antifouling–Killing–Releasing Functions for Medical Tubing

Tailoring Cell Attachment onto Melt Electrowritten Scaffolds via a Phase Separated Hydrogel Coating with Peptide Functionalization

AbstractHighly porous scaffolds with a high surface area can be designed and fabricated via melt electrowriting (MEW). Here, the study introduces morphological features onto the MEW microfibers via a hydrogel coating of phase‐separated poly(2‐hydroxyethyl methacrylate) (pHEMA). This coating is achieved by capturing phase‐separated droplets of pHEMA onto poly(ε‐caprolactone) (PCL) microfibers via dip‐coating, resulting in a hydrogel coating with webbed structures across pores of the MEW scaffold. Excess pHEMA droplets are removed and phase separation is quenched by washing in water, and then functionalized by dipping the pHEMA coated scaffold into a buffered peptide solution. It is demonstrated that a cysteine‐terminated peptide sequence (Cys‐Gly‐Arg‐Gly‐Asp‐Ser‐Gly (CG‐RGD‐SG)) promotes fibroblast adhesion on the hydrogel‐coated MEW scaffolds compared to unmodified pHEMA and compared to scrambled peptide sequence. Due to the protein‐resistant nature of pHEMA, the hydrogel‐coated scaffolds show less cell attachment than non‐coated PCL scaffolds, while RGD‐functionalized pHEMA scaffolds achieve 2.8‐fold increase in cell attachment (p = 0.02) when compared to non‐functionalized pHEMA. The study therefore presents a platform that combines PCL scaffolds of microscale fibers with a phase‐separated pHEMA hydrogel coating that maintains the high porosity of MEW scaffolds yet increases surface area and, importantly, introduces the capability for tailoring cell attachment via peptide functionalization.

FeOOH Quantum Dots Assembled MXene-Decorated 3D Photothermal Evaporator for Synergy Application in Solar Evaporation and Fenton Degradation.

Solar-driven water evaporation is considered as the sustainable approach to alleviate freshwater resource crisis through direct use of solar energy. However, it is still challenging to achieve the multifunctional solar evaporators equipped with both high evaporation and purification performance to handle practical complex wastewater. Here, a simple and cost-effective multifunctional 3D solar evaporator is prepared by alternately decorating the commercial sponge with FeOOH quantum dots (FQDs) supported MXene sheets composites and chitosan hydrogel coatings for enabling the solar water evaporation and organic wastewater photodegradation simultaneously. MXene composites allow the solar evaporator with excellent photothermal conversion performance, the hydrophilic chitosan hydrogel coated interconnecting skeleton structures of sponge serve as the mass transfer and water transport channels. The Fenton-catalytic FQDs anchored on the MXene sheets surface accept the photo-generated electrons of MXene sheets to induce the organic pollutant photo-Fenton degradation reaction under sunlight irradiation. The resulting evaporator possesses both excellent water evaporation rate of 2.54kg m-2h-1 and high degradation efficiency (99.24% for methylene blue), coupled with durable salt-resisting performance during long-term seawater desalination (20 wt.% NaCl). This work provides a simple and feasible strategy for designing multifunctional solar evaporators to meet the potential application scenarios in practice.

Construction of a Carbon Monoxide-Releasing Bioactive Hydrogel Coating on the Magnesium Alloy Surface for Better Corrosion Resistance, Anticoagulant Properties, and Endothelial Cell Growth

In this study, we first fabricated a crosslinked hydrogel coating by polymerizing methacryloyloxyethyl sulfonyl betaine and acrylamide (SBMA) on the magnesium (Mg) alloy surface employing ultraviolet (UV) polymerization. Bivalirudin and CO-releasing molecules (CORM-401) were further grafted onto the hydrogel coating surface to acquire a multifunctional biocompatible coating capable of releasing CO to augment corrosion-resisting properties and biocompatibility. The findings verified that the bioactive hydrogel coating significantly increased the corrosion potential and reduced the corrosion current, thereby improving the anticorrosion performance. Meanwhile, owing to the excellent hydrophilicity, the antifouling performance of the hydrogel coating, and the excellent anticoagulant performance of bivalirudin, the hydrogel coating significantly reduced the fibrinogen adsorption, platelet adhesion and activation, and hemolysis occurrence, displaying excellent ability to inhibit blood clotting. Moreover, endothelial cell (EC) experimental results demonstrated that the hydrogel coating could significantly promote EC growth, displaying great potential to induce re-endothelialization after implantation. Specifically, in the presence of cysteine capable of catalyzing CO release, the anticoagulant performance and ability to promote EC growth were further improved significantly. Therefore, the study offers an effective strategy to prepare a hydrogel coating capable of releasing CO to improve the corrosion-resisting performance and biocompatibility of Mg alloys, which is anticipated to be applied in the surface modification of Mg alloy intravascular stents.

Biocompatible Hydrogel Coating on Silicone Rubber with Improved Antifouling and Durable Lubricious Properties.

Silicone rubber is widely used in various medical applications. However, silicone rubber is prone to biofouling due to their affinity for lipids and has a high friction coefficient, which can significantly impact their efficacy and performance used as medical devices. Thus, the development of hydrogels with antifouling and lubricious abilities for the modification of silicone rubber is in high demand. We herein prepared a variety of hydrogel coatings mainly based on polyvinylpyrrolidone (PVP) and poly (ethylene glycol) diacrylate (PEGDA). We modified the silicone rubber using the prepared hydrogel coatings and cured it using a heating method. Then, we characterized its surface and evaluated the antifouling property, lubricious property, cytotoxicity, sensitization, and vaginal irritation. The results of water contact angle (WCA), protein adsorption, and friction coefficient indicated the success of the modification of the silicone rubber, leading to a significant decrease in the corresponding test values. Meanwhile, the results of cytotoxicity, sensitization, and vaginal irritation tests showed that the hydrogel coating-modified silicone rubbers have an excellent biocompatibility. This study describes how the silicone rubber could be modified with a biocompatible hydrogel coating. The hydrogel coating-modified silicone rubbers have improved antifouling and durable lubricious properties.

Enhancing Bone-Titanium integration through hydrogel coating mediated sequential M1/M2 polarization of interfacial macrophages

Regulating phenotypes of in situ macrophages (Mφ) is a cutting-edge strategy for promoting bone-Titanium (Ti) integration, but what is the most rational modulation manner has long been controversial. Short-term inducing in situ M1 Mφ polarization or inducing in situ M2 Mφ polarization have proven to be capable of promoting osseointegration. However, an increasing number of researches have claimed that sequentially inducing in situ M1/M2 Mφ polarization, compared to the above-mentioned two strategies, could further enhance osseointegration. In this work, we compared the capability of the three different modulation manners to promote osseointegration. Briefly, we anchored a homogeneous Poly(HEMA-co-3APBA)/LUT/SOP hydrogel coating, which could sequentially release pro-inflammatory sophoridine (SOP) molecules and anti-inflammatory luteolin (LUT) molecules through pH mediated conformational transition of phenylboronic acid ester bonds, on the surface of Ti implants. Ti implants coated with the Poly(HEMA-co-3APBA)/SOP hydrogel or the Poly(HEMA-co-3APBA)/LUT hydrogel, which merely released SOP molecules and LUT molecules respectively, were utilized as controls. In vitro Mφ co-culture assays proved the immunoregulation functions of different hydrogel coatings in inducing Mφ polarization, and the rationale behind which was identified to be related to the PI3K-AKT signaling pathways. In addition, the immunoregulation mediated osteogenic differentiation behaviors of bone marrow mesenchymal stem cells (BMSCs) were also investigated. Implantation of as-prepared Ti nails to a rat femur defect model followed by evaluations of H&E staining, Masson staining, immunohistochemical staining, etc. proved the stronger capability to enhance osseointegration of inducing sequential M1/M2 Mφ polarization than short-term inducing in situ M1 Mφ polarization or inducing in situ M2 Mφ polarization. This work not only reported a novel Ti implant with superior osseointegration capability but also will inspire corresponding researches in the future.

Research progress on blood compatibility of hemoperfusion adsorbent materials.

This comprehensive review examines the latest developments in improving the blood compatibility of hemoperfusion adsorbents. By leveraging advanced coating and modification techniques, including albumin-collodion, cellulose, hydrogel, and heparin coatings, notable enhancements in blood compatibility have been achieved across diverse adsorbent types, such as carbon-based, resin-based, and polysaccharide-based materials. Despite promising laboratory results, the intricate manufacturing processes and elevated costs present significant challenges for broad clinical application. Therefore, future endeavors should focus on cost-benefit analysis, large-scale production strategies, in-depth exploration of blood-material interactions, and innovative technologies to propel the development of safer and more effective blood purification therapies.

Enhanced antifouling and anti-swarming properties poly (sulfobetaine methacrylate-co-2-hydroxy-3-phenoxypropyl acrylate) hydrogel coatings for urinary catheters

Catheter-associated urinary tract infection (CAUTI) remains an unsolved challenge to date, particularly with the emergence and rapid spread of antimicrobial-resistant bacterial pathogens. Despite extensive research, a catheter coating that can offer intrinsic resistance to host protein deposition, bacterial biofilm formation, and swarming is still urgently required. Zwitterionic hydrogel coatings due to their superior lubricity and antifouling properties represent a promising candidate, but their weak mechanical stability in water and poor resistance to bacterial swarming migration limit their application in urinary catheters for infection control. In this research, we describe the fabrication of a multifunctional catheter coating by copolymerizing zwitterionic sulfobetaine methacrylate (SBMA) polymers and a swarming inhibitor material, 2-hydroxy-3-phenoxypropyl acrylate (HPA). The introduction of polyHPA (PHPA) effectively impeded the uncontrolled swelling behavior of the zwitterionic PSBMA hydrogel, resulting in enhanced mechanical stability. Moreover, the copolymer coating retains the antifouling and anti-swarming properties of the homopolymers when challenged with fibrinogen, Escherichia coli, and Proteus mirabilis. The HPA content significantly correlated with its anti-adhesion activity against fibrinogen and biofilm, and the coating with an SBMA: HPA monomer feed molar ratio of 4:1 showed the best antifouling activity, reducing fibrinogen deposition by about 40 % and biofilm coverage by around fourfold compared to the uncoated polydimethylsiloxane (PDMS) surface. Furthermore, the copolymer coating also exhibited no cytotoxicity, suggesting it as a promising catheter coating for preventing CAUTI.

Biomimetic Layered Hydrogel Coating for Enhanced Lubrication and Load-Bearing Capacity

Biomimetic hydrogel lubrication coatings with high wettability and low friction show great promise in tissue engineering, wound dressing, drug delivery, and intelligent sensing. Inspired by the hierarchical structure of natural cartilage, a layered hydrogel coating was constructed to functionalize rigid polyetheretherketone (PEEK). The layered hydrogel coating features a structural design comprising a top soft layer and a middle robust layer. The porous structure of the top soft hydrogel layer stores water molecules, providing surface lubrication, while the dense structure of the middle robust hydrogel layer offers load-bearing capacity. These synergistic effects of the gradient hydrogel layer endow the PEEK substrate with an ultra-low coefficient of friction (COF~0.010 at 5 N load), good load-bearing capacity (COF~0.031 at 10 N load), and excellent wear resistance (COF < 0.05 at 5 N load after 20,000 sliding cycles). This study introduces a novel design paradigm for robust hydrogel coatings with exceptional lubricity, displaying the potential application in cartilage replacement materials.

A robust low-friction triple network hydrogel based on multiple synergistic enhancement mechanisms

Hydrogels exhibit promising applications, particularly due to their high water content and excellent biocompatibility. Despite notable progress in hydrogel technology, the concurrent enhancement of water content, mechanical strength, and low friction poses substantial challenges to practical utilization. In this study, employing molecular and network design guided based on multiple synergistic enhancement mechanisms, we have developed a robust polyvinyl alcohol (PVA)–polyacrylic acid (PAA)–polyacrylamide (PAAm) three-network (TN) hydrogel exhibiting high water content, enhanced strength, low friction, and fatigue resistance. The hydrogel manifests a water content of 63.7%, compression strength of 6.3 MPa, compression modulus of 2.68 MPa, tensile strength reaching 7.3 MPa, and a tensile modulus of 10.27 MPa. Remarkably, even after one million cycles of dynamic loading, the hydrogel exhibits no signs of fatigue failure, with a minimal strain difference of only 1.15%. Furthermore, it boasts a low sliding coefficient of friction (COF) of 0.043 and excellent biocompatibility. This advancement extends the applications of hydrogels in emerging fields within biomedicine and soft bio-devices, including load-bearing artificial tissues, artificial blood vessels, tissue scaffolds, robust hydrogel coatings for medical devices, and joint parts of soft robots.

Tannic acid one-step induced quaternized chitin-based edible and easy-cleaning coatings with multifunctional preservation for perishable products

The development of biomass hydrogel coatings is significant for fruit preservation. This paper presents the facile development of a multifunctional polysaccharide-based hydrogel produced from quaternized chitin (QC) and tannic acid (TA) by in situ rapid cross-linking with high-density hydrogen bonding using the sample mixing method. The Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) spectra, and thermogravimetric analysis (TGA) proved that QC-TA hydrogel was formed by physical interactions (hydrogen bonding, electrostatic interaction, etc.). Moreover, the cross-linking density of the QC-TA hydrogels was analyzed by rheological property measurements and scanning electron microscope (SEM) morphology observations. This polysaccharide-based hydrogel, QC-TA, was evaluated as an edible coating for perishable food items, demonstrating significant improvements in physic-chemical properties, oxidation resistance, and antimicrobial activity against key pathogens (E. coli, S. aureus, and C. albicans). Notably, the hydrogel formed a protective film that effectively shields fruits from mechanical damage, maintaining freshness and extending shelf life, and also featuring with easy cleaning. Applied to cherry tomatoes, the QC-TA coating ensured a smooth, uniform surface, reducing dehydration and flavor loss while inhibiting microbial growth. These findings underscore the potential of employing polyphenol induced polysaccharide forming green hydrogel coatings as an economical, efficient strategy for enhancing the quality and safety of perishable foods, representing an advancement in the field of sustainable food packaging.

Antibacterial and Anticorrosive Hydrogel Coating Based on Complementary Functions of Sodium Alginate and g-C3N4.

Graphitic carbon nitride (g-C3N4, CN) has emerged as a promising photocatalytic material due to its inherent stability, antibacterial properties, and eco-friendliness. However, its tendency to aggregate and limited dispersion hinder its efficacy in practical antibacterial applications. To address these limitations, this study focuses on developing a composite hydrogel coating, in which sodium alginate (SA) molecules interact electrostatically and through hydrogen bonding to anchor CN, thereby significantly improving its dispersion. The optimal CN loading of 35% results in a hydrogel with a tensile strength of 120 MPa and an antibacterial rate of 99.87% within 6 h. The enhanced mechanical properties are attributed to hydrogen bonding between the -NH2 groups of CN and the -OH groups of SA, while the -OH groups of SA facilitate the attraction of photogenerated holes from CN, promoting carrier transfer and separation, thereby strengthening the antibacterial action. Moreover, the hydrogel coating exhibits excellent antibacterial and corrosion resistance capabilities against Pseudomonas aeruginosa on 316L stainless steel (316L SS), laying the foundation for advanced antimicrobial and anticorrosion hydrogel systems.

Biomimetic hydrogel coatings for improving the corrosion resistance, hemocompatibility, and endothelial cell growth of the magnesium alloy

The fast biodegradation and poor biocompatibility of Mg alloys in physiological environments are still the main problems restricting their application in cardiovascular stents. In this study, the hydrogel coatings (SBMA-AAM) with different proportions of methacryloyl ethyl sulfobetaine (SBMA) and acrylamide (AAM) were built on the surface of AZ31B magnesium alloy through ultraviolet (UV) polymerization. The corrosion degradation behavior, hemocompatibility, and endothelial cell (EC) growth performance of the samples were studied in detail. The findings revealed that the uniform and dense SBMA-AAM coatings could significantly enhance the corrosion resistance. In addition, the hydrogel coatings showed excellent hydrophilicity, which increased the albumin adsorption while inhibiting the fibrinogen adsorption, and thus reduced the platelet adhesion and activation and hemolysis rate, accordingly significantly enhancing their anticoagulant performance. Furthermore, SBMA-AAM hydrogel coating promoted the EC adhesion and proliferation and the vascular endothelial growth factor (VEGF) and nitric oxide (NO) secretion of ECs, which is conducive to promoting endothelialization. When the concentration ratio of SBMA and AAM was 1: 2, the modified magnesium alloy showed the best corrosion resistance and biocompatibility. Therefore, the SBMA-AAM hydrogel coating could effectively regulate the corrosion degradation performance and biocompatibility of Mg alloys, laying a foundation for the application of Mg alloys in cardiovascular stents.

Novel Nano Drug-Loaded Hydrogel Coatings for the Prevention and Treatment of CAUTI.

Catheter-associated urinary tract infection (CAUTI) is a prevalent type of hospital-acquired infection, affecting approximately 15% to 25% of patients with urinary catheters. Long-term use of the catheter can lead to colonization of microorganisms and biofilm formation, and may develop into bacterial CAUTI. However, the frequent replacement of catheters in clinical settings can result in tissue damage, inflammation, ulceration, and additional complications, causing discomfort and pain for patients. In light of these challenges, a novel nanodrug-supported hydrogel coating called NP-AM/FK@OMV-P/H has been developed in this study. Through in vitro experiments, it is confirmed that OMV nano-loaded liquid gel coating has an effective reaction against E.coli HAase and releases antibacterial drugs. This coating has also demonstrated strong inhibition of E.coli and has shown the ability to inhibit the formation of bacterial biofilm. These findings highlight the potential of the OMV nanoparticle gel coating in preventing and treating bacterial infections. Notably, NP-AM/FK@OMV-P/H has exhibited greater efficacy against multidrug-resistant E.coli associated with UTIs compared to coatings containing single antimicrobial peptides or antibiotics. Additionally, it has demonstrated good biosecurity. In conclusion, the NP-AM/FK@OMV-P/H coating holds great potential in providing benefits to patients with CAUTI.

Mucus Mimic Hydrogel Coating for Lubricous, Antibiofouling, and Anti-Inflammatory Urinary Catheters.

Silicone is a common elastomer used in indwelling urinary catheters, and catheters are widely used in various medical applications due to their exceptional biocompatibility, hypoallergenic properties, and flexibility. However, silicones exhibit hydrophobic characteristics, lack inherent biolubrication, and are susceptible to nonspecific biosubstance adsorption, resulting in complications including but not limited to tissue trauma, postoperative pain, and urinary tract infections (UTIs). The development of effective surface designs for biomedical catheters to mitigate invasive damage and UITs has been a longstanding challenge. Herein, we present a novel approach to prepare a mucus mimic hydrogel coating. A thin layer of hydrogel containing xylitol is fabricated via photopolymerization. The surface modification technique and the interface-initiated hydrogel polymerization method ensure robust interfacial coherence. The resultant coating exhibits a low friction coefficient (CoF ≈ 0.1) for urinary catheter applications. Benefiting from the hydration layer and the antifouling of the xylitol unit, the xylitol hydrogel-coated surfaces (pAAAMXA) demonstrate outstanding antibiofouling properties against proteins (98.9% reduction relative to pristine polydimethylsiloxane (PDMS)). Furthermore, the pAAAMXA shows general adhesion resistance against bacteria primarily responsible for UITs (Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), Methicillin-resistant strains of Staphylococcus aureus (MRSA), and Staphylococcus epidermidis (S. epidermidis)) without compromising biotoxicity (cell viability 98%). In vivo, catheters coated with the mucus mimic hydrogel displayed excellent biocompatibility, resistance to adhesion of bio substance, and anti-inflammatory characteristics. This work describes a promising alternative to conventional silicone catheters, offering potential for clinical interventional procedures with minimized complications.

THE ROLE OF ANTIBACTERIAL HYDROGEL COATING ON COMPLICATION RISKS AFTER COMPLEX PRIMARY AND CEMENTLESS HIP REVISION ARTHROPLASTY: A RETROSPECTIVE MATCHED COHORT STUDY

This study aimed to verify the hypothesis that an antibiotic loaded hydrogel, defensive antimicrobial coating (DAC), reduces overall complication and infection rates when used for high-risk primary and revision total hip arthroplasty (THA).This was a retrospective study matched cohort study of 238 patients, treated with cementless implants with and without DAC. A sub-group analysis of patients undergoing 2nd stage revision THA for prosthetic joint infection (PJI) was also conducted. Re-infection rates within 2 years, complications necessitating surgical intervention and radiographic analysis for aseptic loosening was assessed.The mean age was 68.3±11.5 years, with 39 (32.8%) Macpherson class A, 64 (53.8%) class B and 16 (13.4%) class C patients. 4 (3.4%) patients in the DAC group developed complications including 1 PJI and 1 delayed wound healing, while 13 (10.9%) patients in the control group developed complications including 5 PJIs and 3 delayed wound healing (p=0.032). PJI rates (p=0.136) and delayed wound healing rates (p=0.337) were not statistically significant. For 2nd stage revision THA for PJI there were 86 patients in the DAC group and 45 in the control group. 1 (1.2%) patient in the DAC group developed complications with no recurrences of infection or delayed wound healing, while 10 (22.2%) patients in the control group developed complications including 4 recurrent PJI and 1 delayed wound healing (p=0.003). Recurrent PJI rates were statistically significant (p=0.005) while delayed wound healing rates were not (p=0.165). Patients treated with DAC also had lower rates of aseptic loosening (0% vs 6.7%; p=0.015).Antibiotic impregnated hydrogel coatings on cementless implants showed decreased complication rates after complex primary or revision THA. In 2nd stage revision THA for PJI, it was associated with reduced risk of re-infection and aseptic loosening.

Improving the lubricity of titanium alloy joint by using tough, antibacterial and strongly adhesive hydrogel

Titanium alloy, especially Ti6Al4V, has gained widespread recognition as a material for joint implant. Aiming at the problems such as high friction and easy infection of Ti6Al4V implant materials in practical applications, a strategy of surface modification of Ti6Al4V was proposed. Inspired by the articular cartilage, a tough hydrogel integrated with lubricating and antibacterial properties was prepared in this work, and tightly applied to the Ti6Al4V surface with an adhesive agent. The strength of the hydrogel coating was similar to that of human articular cartilage, and play remarkable lubricating and antibacterial effects at the same time. This work presented new perspectives on the application of hydrogel coatings in biomedicine, underwater equipment, smart manipulation, and other fields.

Polyphenol-Reinforced Glycocalyx-Like Hydrogel Coating Induced Myocardial Regeneration and Immunomodulation.

Although minimally invasive interventional occluders can effectively seal heart defect tissue, they still have some limitations, including poor endothelial healing, intense inflammatory response, and thrombosis formation. Herein, a polyphenol-reinforced medicine/peptide glycocalyx-like coating was prepared on cardiac occluders. A coating consisting of carboxylated chitosan, epigallocatechin-3-gallate (EGCG), tanshinone IIA sulfonic sodium (TSS), and hyaluronic acid grafted with 3-aminophenylboronic acid was prepared. Subsequently, the mercaptopropionic acid-GGGGG-Arg-Glu-Asp-Val peptide was grafted by the thiol-ene "click" reaction. The coating showed good hydrophilicity and free radical-scavenging ability and could release EGCG-TSS. The results of biological experiments suggested that the coating could reduce thrombosis by promoting endothelialization, and promote myocardial repair by regulating the inflammatory response. The functions of regulating cardiomyocyte apoptosis and metabolism were confirmed, and the inflammatory regulatory functions of the coating were mainly dependent on the NF-kappa B and TNF signaling pathway.

Application of Lactiplantibacillus plantarum hydrogel coating in combination with ice temperature for the preservation of fresh yak meat

Fresh yak meat is highly nutritious and prone to spoilage, so developing suitable preservation methods is crucial. In this study, hydrogel coatings composed of konjac glucomannan, Lactiplantibacillus plantarum and gallic acid (KGX) were applied to preserve fresh yak meat under ice temperature (−1 °C). After 16 days, KGX group showed lowest total viable count (5.3 ± 0.1 log cfu/g) and total volatile basic nitrogen (13.02 ± 1.40 mg/100 g), which did not exceed the relevant standards of fresh meat. Combined assessments of color, texture, pH, drip loss rate, and thiobarbituric acid reactive substances indicated that KGX coating effectively prolonged yak meat preservation. High-throughput sequencing revealed that KGX coating effectively reduced the abundance of Pseudomonas and Candida. The application of L. plantarum hydrogel coatings in conjunction with ice temperature increased the shelf life of fresh yak meat to 16–20 days, suggesting its potential as a viable preservation method for fresh meat.

A feasible strategy of Ag nanoparticles-sodium alginate-polyacrylamide-polyvinyl alcohol hydrogel coatings for preventing catheter-associated urinary tract infections

Catheter-associated urinary tract infections (CAUTIs) pose a significant clinical challenge, potentially resulting in complications such as bacteriuria and mortality. Developing coatings with antibacterial and antiadhesive properties for urinary catheters is essential to address these issues. In this study, a novel hydrogel coating composed of silver nanoparticles (Ag NPs), sodium alginate (SA), polyacrylamide (PAAm), and polyvinyl alcohol (PVA) was prepared on polydopamine (PDA)-modified latex urinary catheters using a simple dipping method. The Ag NPs were synthesized via an in-situ reduction of AgNO3 with SA, eliminating the need for additional chemical reductants. The Ag NPs-SA-PAAm-PVA hydrogel-coated urinary catheter demonstrated superior antibacterial and antiadhesive characteristics compared to the bare urinary catheter. The antiadhesive properties of the hydrogel-coated urinary catheter were attributed to its hydrophilicity and lubricity, while the antibacterial effects were linked to the penetration of Ag NPs and Ag+ ions into bacterial structures, disrupting bacterial metabolism through the generation of reactive oxygen species (ROS) and free radicals upon attachment of Ag+ ions to cell walls and membranes. Furthermore, the hydrogel coatings exhibited remarkable mechanical properties, along with good biocompatibility and hemocompatibility. The exceptional antibacterial and antiadhesive properties of the hydrogel-coated urinary catheter hold promise for reducing CAUTIs.