Hybridization Of Single-stranded DNA Research Articles

A sensitive fluorescence biosensor based on ligation-transcription and CRISPR/Cas13a-assisted cascade amplification strategies to detect the H1N1 virus.

We propose a sensitive H1N1 virus fluorescence biosensor based on ligation-transcription and CRISPR/Cas13a-assisted cascade amplification strategies. Products are generated via the hybridization of single-stranded DNA (ssDNA) probes containing T7 promoter and crRNA templates to a target RNA sequence using SplintR ligase. This generates large crRNA quantities in the presence of T7 RNA polymerase. At such crRNA quantities, ternary Cas13a, crRNA, and activator complexes are successfully constructed and activate Cas13a to enhance fluorescence signal outputs. The biosensor sensitively and specifically monitored H1N1 viral RNA levels down to 3.23 pM and showed good linearity when H1N1 RNA concentrations were 100 pM-1 µM. Biosensor specificity was also excellent. Importantly, our biosensor may be used to detect other viral RNAs by altering the sequences of the two probe junctions, with potential applications for the clinical diagnosis of viruses and other biomedical studies.

Surface Hybridization Chain Reaction of Binary Mixture DNA-PEG Corona Nanostructures Produced by Low-Volume RAFT-Mediated Photopolymerization-Induced Self-Assembly.

DNA-polymer hybrids have been attracting interest as adaptable functional materials by combining the stability of polymers with DNA nanotechnology. Both research fields have in common the capacity to be precise, versatile, and tunable, a prerequisite for creating powerful tools which can be easily tailored and adapted for bio-related applications. However, the conjugation of hydrophilic DNA with hydrophobic polymers remains challenging. In recent years, polymerization-induced self-assembly (PISA) has attracted significant attention for constructing nano-objects of various morphologies owing to the one-step nature of the process, creating a beneficial method for the creation of amphiphilic DNA-polymer nanostructures. This process not only allows pure DNA-polymer-based systems to be produced but also enables the mixture of other polymeric species with DNA conjugates. Here, we present the first report of a DNA-PEG corona nano-object's synthesis without the addition of an external photoinitiator or photocatalyst via photo-PISA. Furthermore, this work shows the use of DNA-macroCTA, which was first synthesized using a solid-support method resulting in high yields, easy upscaling, and no need for HPLC purification. In addition, to the formation of DNA-polymer structures, increasing the nucleic acid loading of assemblies is of great importance. One of the most intriguing phenomena of DNA is the hybridization of single-stranded DNA with a second strand, increasing the nucleic acid content. However, hybridization of DNA in a particle corona may destabilize the nanomaterial due to the electrostatic repulsive force on the DNA corona. Here, we have investigated how changing the DNA volume fraction in hybrid DNA-polymer self-assembled material affects the morphology. Moreover, the effect of the corona composition on the stability of the system during the hybridization was studied. Additionally, the hybridization chain reaction was successfully applied as a new method to increase the amount of DNA on a DNA-based nano-object without disturbing the morphology achieving a fluorescence signal amplification.

Electrical potential-assisted DNA-RNA hybridization for rapid microRNA extraction.

Analysis of microRNAs (miRNAs) is important in cancer diagnostics and therapy. Conventional methods used to extract miRNA for analysis are generally time-consuming. A novel approach for rapid and sensitive extraction of miRNAs is urgently need for clinical applications. Herein, a novel strategy based on electrical potential-assisted DNA-RNA hybridization was designed for miRNA extraction. The entire extraction process was accomplished in approximately 3min, which is much shorter than the commercial adsorption column method, at more than 60min, or the TRIzol method, at more than 90min. Additionally, the method offered the advantages of simplicity and specificity during the extraction process by electrical potential-assisted hybridization of single-stranded DNA and RNA. Taking let-7a as an example, satisfactory results were achieved for miRNA extraction in serum, demonstrating the applicability in miRNA nucleic acid amplification.

Electrochemical DNA biosensors for label-free breast cancer gene marker detection.

We present an electrochemical DNA detection strategy based on self-assembled ferrocene-cored poly(amidoamine) dendrimers for the detection of a gene relevant to breast cancer. The chemisorption of three ferrocene-cored poly(amidoamine) generations and hybridization of single-stranded DNA on a Au electrode were studied by cyclic voltammetry and differential pulse voltammetry. The biosensor demonstrated high sensitivity of 0.13 μA/(ng/ml) in the detection of the target DNA with a linear range of 1.3-20 nM and a detection limit of 0.38 nM. The DNA biosensor also has high selectivity for the target DNA, showing a clear signal difference from a noncomplementary sequence and a single-base-mismatch sequence, which was used as a model of BRAC1 gene mutation. The results shown are highly motivating for exploring DNA biosensing technology in the diagnosis of breast cancer caused by mutation of the BRAC1 gene. Graphical abstract.

Comparison Study on Fluorescence Quenching Ability of DNA Wrapped Single- and Multi-Walled Carbon Nanotubes

In terms of superior physical properties of carbon nanotubes (CNTs), CNT has been intensively studied for various applications including biosensors and drug delivery. For medical applications, hybridization of single-stranded DNA (ssDNA) and CNT (ssDNA-CNTs) is key to utilize them multiply because DNA can bind to various biomolecules. For example, Li et al. used ssDNA-CNTs for nucleic acid detection by applying the reaction of fluorescent molecules and CNTs. It is known that, due to electron transfer, fluorescence emission of fluorescent dyes are quenched by CNTs when fluorescent molecules directly adsorbed on CNT surfaces.In this study, we investigated the fluorescence quenching ability of single- and multi-walled carbon nanotubes (SWNTs and MWNTs, respectively) by measuring the fluorescence quenching ratio of fluorescence emission when fluorescein-labeled single-stranded DNA (Fluor-ssDNA) is reacted with the hybrids of 30-mers of thymine (T30) and SWNTs/MWNTs. As the base-sequences of Fluor-ssDNA, we adopted dT30 and dA30 (Fluor-T30 and Fluor-A30, respectively).Fluorescence measurements revealed that the fluorescence quenching ratios of the mixture of Fluor-T30 and T30-SWNT/MWNT were 28 ± 3.1% and 36 ± 2.0% relative to free fluorescein at the same concentration, respectively. On the other hand, the those of Fluor-A30 with T30-SWNT/MWNT hybrids were 11 ± 1.9% and 32 ± 1.9%, respectively. One of the explanations of fluorescence quenching might be exchange reaction of Fluor-ssDNA and T30 molecules on SWNT surfaces. We conducted fluorescence measurements at various temperatures in order to estimate the thermodynamic parameters of the exchange reaction. The change of the enthalpy was positive value, indicating that the exchange reaction is endothermic process. These results suggest that SWNT hybrids have good resolution for the base-sequences of Fluor-ssDNA, while MWNT hybrids evenly and strongry could quench Fluor-ssDNA regardless of its base-sequences.

Signal-Amplified Lateral Flow Test Strip for Visual Detection of Cu2.

A signal-amplified lateral flow test strip (SA-LFTS) for the detection of Cu2+ in aqueous solution was constructed based on Cu+-catalyzed click chemistry and hybridization of single-stranded DNA (ssDNA). Alkyne and azide modified ssDNA acted as specific elements for Cu2+ recognition, and a chemical ligation product formed through Cu+-catalyzed alkyne–azide cycloaddition. Hybridization of ssDNA-labeled gold nanoparticles resulted in high sensitivity, and the output signal could be observed directly by the naked eye. Using the developed SA-LFTS under optimal conditions, Cu2+ could be detected rapidly with limit of detections of 5 nM and 4.2 nM by visual observation and quantitative analysis, respectively. The sensitivity (i.e. the visual limit of detection) of the SA-LFTS was 80-times higher than that of traditional LFTS. The SA-LFTS was applied to the determination of Cu2+ in municipal water and river water samples with the results showing good recovery and accuracy. The developed test strip is promising for point-of-care applications and detection of Cu2+ in the field.

Site-Specific Surface Functionalization of Gold Nanorods Using DNA Origami Clamps.

Precise control over surface functionalities of nanomaterials offers great opportunities for fabricating complex functional nanoarchitectures but still remains challenging. In this work, we successfully developed a novel strategy to modify a gold nanorod (AuNR) with specific surface recognition sites using a DNA origami clamp. AuNRs were encapsulated by the DNA origami through hybridization of single-stranded DNA on the AuNRs and complementary capture strands inside the clamp. Another set of capture strands on the outside of the clamp create the specific recognition sites on the AuNR surface. By means of this strategy, AuNRs were site-specifically modified with gold nanoparticles at the top, middle, and bottom of the surface, respectively, to construct a series of well-defined heterostructures with controlled "chemical valence". Our study greatly expands the utility of DNA origami as a tool for building complex nanoarchitectures and represents a new approach for precise tailoring of nanomaterial surfaces.

A Localized Surface Plasmon Resonance Imaging Instrument for Multiplexed Biosensing

Localized surface plasmon resonance (LSPR) spectroscopy has been widely used for label-free, highly sensitive measurements of interactions at a surface. LSPR imaging (LSPRi) has the full advantages of LSPR but enables high-throughput, multiplexed measurements by simultaneously probing multiple individually addressable sensors on a single sample surface. Each spatially distinct sensor can be tailored to provide data regarding different surface functionalities or reaction environments. Previously, LSPRi has focused on single-particle sensing where the size scale is very small. Here, we create defined macroscale arrays of nanoparticles that are compatible with common patterning methods such as dip-pen nanolithography and multichannel microfluidic delivery devices. With this new LSPR sensing format, we report the first demonstration of multiplexed LSPR imaging and show that the increased throughput of our instrument enables the collection of a complete Langmuir binding curve on a single sensor surface. In addition, the multiplexed LSPR sensor is highly selective, as demonstrated by the hybridization of single-stranded DNA to complementary sequences immobilized on the sensor surface. The LSPR arrays described in this work exhibit uniform sensitivity and tailorable optical properties, making them an ideal platform for high-throughput, label-free analysis of a variety of molecular binding interactions.

Detect the Hybridization of Single-Stranded DNA by Parallel Scan Spectral Surface Plasmon Resonance Imaging

We investigate the ability of a parallel scan spectral surface plasmon resonance imaging system in analyzing hybridization of single-stranded DNA (ssDNA) on microarray. The ssDNA probes are modified by a thiol group and thereby can be immobilized onto the gold film. Hybridization experiments are carried out by using both complementary and noncomplementary sequence to confirm the specificity of interaction. We also demonstrate that the data analysis is very important in reducing the noise and improving the resolution by comparing polynomial fitting method with the combination of polynomial fitting and centroid method. Finally, the results demonstrate that the parallel scan spectral surface plasmon resonance imaging system can be used for high-throughput analysis of the hybridization of the ssDNA.

Real-time DNA detection using Pt nanoparticle-decorated reduced graphene oxide field-effect transistors

A large-area, continuous, few-layer reduced graphene oxide (rGO) thin film has been fabricated on a Si/SiO(2) wafer using the Langmuir-Blodgett (LB) method followed by thermal reduction. After photochemical reduction of Pt nanoparticles (PtNPs) on rGO, the obtained PtNPs/rGO composite is employed as the conductive channel in a solution-gated field effect transistor (FET), which is then used for real-time detection of hybridization of single-stranded DNA (ssDNA) with high sensitivity (2.4 nM). Such a simple, but effective method for fabrication of rGO-based transistors shows great potential for mass-production of graphene-based electronic biosensors.

Thermodynamics of DNA hybridization on surfaces

Hybridization of single-stranded DNA (ssDNA) targets to surface-tethered ssDNA probes was simulated using an advanced coarse-grain model to identify key factors that influence the accuracy of DNA microarrays. Comparing behavior in the bulk and on the surface showed, contrary to previous assumptions, that hybridization on surfaces is more thermodynamically favorable than in the bulk. In addition, the effects of stretching or compressing the probe strand were investigated as a model system to test the hypothesis that improving surface hybridization will improve microarray performance. The results in this regard indicate that selectivity can be increased by reducing overall sensitivity by a small degree. Taken as a whole, the results suggest that current methods to enhance microarray performance by seeking to improve hybridization on the surface may not yield the desired outcomes.

Simultaneous Detection of Acidovorax avenae subsp. citrulli and Didymella bryoniae in Cucurbit Seedlots Using Magnetic Capture Hybridization and Real-Time Polymerase Chain Reaction

To improve the simultaneous detection of two pathogens in cucurbit seed, a combination of magnetic capture hybridization (MCH) and multiplex real-time polymerase chain reaction (PCR) was developed. Single-stranded DNA hybridization capture probes targeting DNA of Acidovorax avenae subsp. citrulli, causal agent of bacterial fruit blotch, and Didymella bryoniae, causal agent of gummy stem blight, were covalently attached to magnetic particles and used to selectively concentrate template DNA from cucurbit seed samples. Sequestered template DNAs were subsequently amplified by multiplex real-time PCR using pathogen-specific TaqMan PCR assays. The MCH multiplex real-time PCR assay displayed a detection threshold of A. avenae subsp. citrulli at 10 CFU/ml and D. bryoniae at 10(5) conidia/ml in mixtures of pure cultures of the two pathogens, which was 10-fold more sensitive than the direct real-time PCR assays for the two pathogens separately. Although the direct real-time PCR assay displayed a detection threshold for A. avenae subsp. citrulli DNA of 100 fg/microl in 25% (1/4 samples) of the samples assayed, MCH real-time PCR demonstrated 100% detection frequency (4/4 samples) at the same DNA concentration. MCH did not improve detection sensitivity for D. bryoniae relative to direct real-time PCR using conidial suspensions or seed washes from D. bryoniae-infested cucurbit seed. However, MCH real-time PCR facilitated detection of both target pathogens in watermelon and melon seed samples (n = 5,000 seeds/sample) in which 0.02% of the seed were infested with A. avenae subsp. citrulli and 0.02% were infested with D. bryoniae.

Kinetics and thermodynamics of DNA hybridization on gold nanoparticles

Hybridization of single-stranded DNA immobilized on the surface of gold nanoparticles (GNPs) into double stranded DNA and its subsequent dissociation into ssDNA were investigated. Melting curves and rates of dissociation and hybridization were measured using fluorescence detection based on hybridization-induced fluorescence change. Two distribution functions, namely the state distribution and the rate distribution, were proposed in order to take interfacial heterogeneity into account and to quantitatively analyze the data. Reaction and activation enthalpies and entropies of DNA hybridization and dissociation on GNPs were derived and compared with the same quantities in solution. Our results show that the interaction between GNPs and DNA reduces the energetic barrier and accelerates the dissociation of adhered DNA. At low surface densities of ssDNA adhered to GNP surface, the primary reaction pathway is that ssDNA in solution first adsorbs onto the GNP, and then diffuses along the surface until hybridizing with an immobilized DNA. We also found that the secondary structure of a DNA hairpin inhibits the interaction between GNPs and DNA and enhances the stability of the DNA hairpin adhered to GNPs.

Gold Nanoparticle Based FRET for DNA Detection

The nanoscience revolution that sprouted throughout the 1990s is having great impact in current and future DNA detection technology around the world. In this review, we report our recent progress on gold nanoparticle based fluorescence resonance energy transfer assay to monitor DNA hybridization as well as the cleavage of DNA by nucleases. We tried to discuss a reasonable account of the science and the important fundamental work carried out in this area. We also report the development of a compact, highly specific, inexpensive and user-friendly optical fiber laser-induced fluorescence sensor based on fluorescence quenching by nanoparticles to detect single-strand DNA hybridization at femtomolar level.

Surface-Enhanced Raman Scattering Based Nonfluorescent Probe for Multiplex DNA Detection

To provide rapid and accurate detection of DNA markers in a straightforward, inexpensive, and multiplex format, an alternative surface-enhanced Raman scattering based probe was designed and fabricated to covalently attach both DNA probing sequence and nonfluorescent Raman tags to the surface of gold nanoparticles (DNA-AuP-RTag). The intensity of Raman signal of the probes could be controlled through the surface coverage of the nonfluorescent Raman tags (RTags). Detection sensitivity of these probes could be optimized by fine-tuning the amount of DNA molecules and RTags on the probes. Long-term stability of the DNA-AuP-RTag probes was found to be good (over 3 months). Excellent multiplexing capability of the DNA-AuP-RTag scheme was demonstrated by simultaneous identification of up to eight probes in a mixture. Detection of hybridization of single-stranded DNA to its complementary targets was successfully accomplished with a long-term goal to use nonfluorescent RTags in a Raman-based DNA microarray platform.

A Quartz Crystal Microbalance (QCM) Study of Single-Strand DNA Hybridization and Hydrolytic Cleavage

The use of a quartz crystal microbalance (QCM) for monitoring in situ the immobilization of single-strand DNA marked with mercaptol group at the 5′-end on the surface of a gold-filled 7.995 MHz AT-cut quartz crystal by Au-S bond with the self-assembly technique is reported. The hybridization of ssDNA with complementary 10-mer ODN and 8-mer ODN is described. The QCM was also employed to analyze DNA cleavage by cerium(IV) ions under moderate conditions. The results showed that the QCM, which is capable of sensitive measurement, was able to investigate the immobilization, hybridization, and cleavage of ssDNA in situ. The cerium(IV) ions produced no cleavage in double-strand DNA; they were, however, able to hydrolyze single-strand DNA. Thus, the hydrolytic cleavage of ssDNA at a specific site could be ensured by protective hybridization.

In-situ Measurements of Single-stranded DNA Hybridization and Cleavage by Quartz Crystal Microbalance

In-situ Measurements of Single-stranded DNA Hybridization and Cleavage by Quartz Crystal Microbalance

Methods for strand-specific DNA detection with cationic conjugated polymers suitable for incorporation into DNA chips and microarrays

A strand-specific DNA sensory method is described based on surface-bound peptide nucleic acids and water-soluble cationic conjugated polymers. The main transduction mechanism operates by taking advantage of the net increase in negative charge at the peptide nucleic acid surface that occurs upon single-stranded DNA hybridization. Electrostatic forces cause the oppositely charged cationic conjugated polymer to bind selectively to the "complementary" surfaces. This approach circumvents the current need to label the probe or target strands. The polymer used in these assays is poly[9,9'-bis(6''-N,N,N-trimethylammonium)hexyl)fluorene-co-alt-4,7-(2,1,3-benzothiadiazole) dibromide], which was specifically designed and synthesized to be compatible with excitation sources used in commonly used DNA microarray readers. Furthermore, the utility of poly[9,9'-bis(6''-N,N,N-trimethylammonium)-hexyl)fluorene-co-alt-4,7-(2,1,3-benzothiadiazole) dibromide] has been demonstrated in homogenous and solid-state assays that involve fluorescence resonance energy transfer to a reporter dye (Cy5) and that can benefit from the light harvesting properties observed in water-soluble conjugated polymers.

Generation of single-stranded DNA hybridization probes by PCR using a short, synthetic DNA template.

Generation of single-stranded DNA hybridization probes by PCR using a short, synthetic DNA template.

DNA binding and hybridization on gold and derivatized surfaces

The binding of various single- and double-stranded DNAs onto gold and derivatized gold surfaces, and their hybridization with complementary DNA species, have been investigated using a quartz crystal microbalance (QCM) and surface plasmon resonance (SPR). The DNA species employed were a 21-mer oligonucleotide (Mbo21), several double-stranded plasmid DNAs (7.2 kilobases) modified by incorporation of α-phosphothio-nucleotides into the ends of the linearized plasmid DNA (pPS-S x , where x represents the number of α-phosphothio-nucleotides), and a 30-mer oligonucleotide having a mercaptohexyl group at the 5′-phosphate end (BS1-SH). Both QCM and SPR data reveal that unmodified DNA does not spontaneously adsorb onto underivatized gold surfaces from aqueous solutions. Modification of the gold surface through the attachment of an ionizable thiol compound, 2-dimethylaminoethanethiol hydrochloride (DMAET), allows DNA to adsorb through electrostatic interactions. SPR measurements confirm the presence of Mbo21 DNA on the DMAET-modified gold surface. Immobilized Mbo21, however, does not undergo hybridization. QCM and SPR data suggest that pPS-S 4, pPS-S 50 and BS1-SH DNA all assume a flat orientation on gold. No hybridization of single-stranded DNA to gold-immobilized pPS-S 4 and pPS-S 50 could be detected. In contrast 30-mer DNA binding from solution to the complement BS1-SH immobilized on gold reveals hybridization of the DNA strands.