Hybrid Solar-wind Power Generation System Research Articles

Review of Hybrid Wind-Solar PV Technology in the Generation of Electricity

Achieving sustainability by utilizing alternative energy sources viable technological possibilities for creating sustainable energy, the sun, biomass, wind, geothermal resources, hydropower, and ocean resources are considered. Despite the fact that the total amount of energy produced by PV cells and wind turbines is still far less than that of fossil fuels, their ability to generate electricity has significantly expanded in recent years. This article provides an overview of the Solar-Wind hybrid power system, which generates electricity by combining the Sun and Wind, two renewable energy sources. Microcontrollers are widely used in the field of system management. We can maximize the utilization of those resources by employing this strategy, which takes into account the distinct production processes of each resource. Furthermore, it increases dependability and decreases reliance on any single input. This hybrid solar-wind power generation system is suitable for both industrial and residential applications.

Design and Optimization of a Hybrid Solar–Wind Power Generation System for Greenhouses

The climate crisis and energy price increases make energy supply a crucial parameter in the design of greenhouses. One way to tackle both these issues is the local production of energy from renewable sources. Since the permitted photovoltaic power installation on a greenhouse roof is limited by the need for an adequate amount of photosynthetically active radiation at the crop level, the necessity of designing a hybrid production system combining different renewable sources, storage systems, and conventional sources arises. The present work addresses the multifactorial problem of the optimal design (in terms of energy production quality, produced electricity price and CO2 emissions) of a hybrid power generation system (photovoltaics/wind turbine/accumulators/oil generating unit) to meet greenhouse needs. The design accounts for the needs of production (for tomato cultivation) for different combinations of production and energy equipment (for microclimate management). Extended parametric studies for available solar and wind potential and energy demand are used to generalize the conclusions. Special attention is given to the contribution of various wind turbine sizes. The effect of greenhouse orientation and of photovoltaic modules arrangement on arched roofs is also examined and the different greenhouse energy systems are assessed in terms of energy cost and environmental footprint.

Toward Zero-Emission Hybrid AC/DC Power Systems with Renewable Energy Sources and Storages: A Case Study from Lake Baikal Region

Tourism development in ecologically vulnerable areas like the lake Baikal region in Eastern Siberia is a challenging problem. To this end, the dynamical models of AC/DC hybrid isolated power system consisting of four power grids with renewable generation units and energy storage systems are proposed using the advanced methods based on deep reinforcement learning and integral equations. First, the wind and solar irradiance potential of several sites on the lake Baikal’s banks is analyzed as well as the electric load as a function of the climatic conditions. The optimal selection of the energy storage system components is supported in online mode. The approach is justified using the retrospective meteorological datasets. Such a formulation will allow us to develop a number of valuable recommendations related to the optimal control of several autonomous AC/DC hybrid power systems with different structures, equipment composition and kind of AC or DC current. Developed approach provides the valuable information at different stages of AC/DC hybrid power systems projects development with stand-alone hybrid solar-wind power generation systems.

Optimal design and techno-economic analysis of a hybrid solar–wind power generation system

Solar energy and wind energy are the two most viable renewable energy resources in the world. Good compensation characters are usually found between solar energy and wind energy. This paper recommend an optimal design model for designing hybrid solar–wind systems employing battery banks for calculating the system optimum configurations and ensuring that the annualized cost of the systems is minimized while satisfying the custom required loss of power supply probability (LPSP). The five decision variables included in the optimization process are the PV module number, PV module slope angle, wind turbine number, wind turbine installation height and battery capacity. The proposed method has been applied to design a hybrid system to supply power for a telecommunication relay station along south-east coast of China. The research and project monitoring results of the hybrid project were reported, good complementary characteristics between the solar and wind energy were found, and the hybrid system turned out to be able to perform very well as expected throughout the year with the battery over-discharge situations seldom occurred.

Battery behavior prediction and battery working states analysis of a hybrid solar–wind power generation system

Lead–acid batteries used in hybrid solar–wind power generation systems operate under very specific conditions, and it is often very difficult to predict when the energy will be extracted from or supplied to the battery. Owing to the highly variable working conditions, no battery model has achieved a good compromise between the complexity and precision. This paper presents a simple mathematical approach to simulate the lead–acid battery behaviors in stand alone hybrid solar–wind power generation systems. Several factors that affect the battery behaviors have been taken into account, such as the current rate, the charging efficiency, the self-discharge rate, as well as the battery capacity. Good agreements were found between the predicted results and the field measured data of a hybrid solar–wind project. At last, calculated from 1-year field data with the simulation model, the time-series battery state-of-charge (SOC) has been statistically analyzed considering the monthly and hourly variations as well as the probability distributions. The results have shown the battery working states in the real hybrid solar–wind power generation system.

Optimal sizing method for stand-alone hybrid solar–wind system with LPSP technology by using genetic algorithm

System power reliability under varying weather conditions and the corresponding system cost are the two main concerns for designing hybrid solar–wind power generation systems. This paper recommends an optimal sizing method to optimize the configurations of a hybrid solar–wind system employing battery banks. Based on a genetic algorithm (GA), which has the ability to attain the global optimum with relative computational simplicity, one optimal sizing method was developed to calculate the optimum system configuration that can achieve the customers required loss of power supply probability (LPSP) with a minimum annualized cost of system (ACS). The decision variables included in the optimization process are the PV module number, wind turbine number, battery number, PV module slope angle and wind turbine installation height. The proposed method has been applied to the analysis of a hybrid system which supplies power for a telecommunication relay station, and good optimization performance has been found. Furthermore, the relationships between system power reliability and system configurations were also given.

A novel optimization sizing model for hybrid solar-wind power generation system

This paper develops the Hybrid Solar-Wind System Optimization Sizing (HSWSO) model, to optimize the capacity sizes of different components of hybrid solar-wind power generation systems employing a battery bank. The HSWSO model consists of three parts: the model of the hybrid system, the model of Loss of Power Supply Probability (LPSP) and the model of the Levelised Cost of Energy (LCE). The flow chart of the HSWSO model is also illustrated. With the incorporated HSWSO model, the sizing optimization of hybrid solar-wind power generation systems can be achieved technically and economically according to the system reliability requirements. A case study is reported to show the importance of the HSWSO model for sizing the capacities of wind turbines, PV panel and battery banks of a hybrid solar-wind renewable energy system.