Hyaluronic Acid-tyramine Research Articles

Coaxial Bioprinting of Enzymatically Crosslinkable Hyaluronic Acid-Tyramine Bioinks for Tissue Regeneration.

Three-dimensional (3D) bioprinting has emerged as an important technique for fabricating tissue constructs with precise structural and compositional control. However, developing suitable bioinks with biocompatible crosslinking mechanisms remains a significant challenge. This study investigates extrusion-based bioprinting (EBB) using uniaxial or coaxial nozzles with enzymatic crosslinking (EC) to produce 3D tissue constructs in vitro. Initially, low-molecular-weight dextran-tyramine and hyaluronic acid-tyramine (LMW Dex-TA/HA-TA) bioink prepolymers were evaluated. Enzymatically pre-crosslinking these prepolymers, achieved by the addition of horseradish peroxidase and hydrogen peroxide, produced viscous polymer solutions. However, this approach resulted in inconsistent bioprinting outcomes (uniaxial) due to inhomogeneous crosslinking, leading to irreproducible properties and suboptimal shear recovery behavior of the hydrogel inks. To address these challenges, we explored a one-step coaxial bioprinting system consisting of enzymatically crosslinkable high-molecular-weight hyaluronic acid-tyramine conjugates (HMW HA-TA) mixed with horseradish peroxidase (HRP) in the inner core and a mixture of Pluronic F127 and hydrogen peroxide in the outer shell. This configuration resulted in nearly instantaneous gelation by diffusion of the hydrogen peroxide into the core. Stable hydrogel fibers with desirable properties, including appropriate swelling ratios and controlled degradation rates, were obtained. The optimized bioink and printing parameters included 1.3% w/v HMW HA-TA and 5.5 U/mL HRP (bioink, inner core), and 27.5% w/v Pluronic F127 and 0.1% H2O2 (sacrificial ink, outer shell). Additionally, optimal pressures for the inner core and outer shell were 45 and 80 kPa, combined with a printing speed of 300 mm/min and a bed temperature of 30 °C. The extruded HMW HA-TA core filaments, containing bovine primary chondrocytes (BPCs) or 3T3 fibroblasts (3T3 Fs), exhibited good cell viabilities and were successfully cultured for up to seven days. This study serves as a proof-of-concept for the one-step generation of core filaments using a rapidly gelling bioink with an enzymatic crosslinking mechanism, and a coaxial bioprinter nozzle system. The results demonstrate significant potential for developing designed, printed, and organized 3D tissue fiber constructs.

Development of A 3D Lung Tumor Model For Cell Death Assessment in Microwave Ablation

AbstractPrimary lung cancer is the leading cause of cancer‐related death worldwide. Recent statistics estimate 1.8 million new cases and 1.6 million deaths per year. Despite significant advances in surgery, chemotherapy, and radiotherapy, the 5‐year survival rate remains at just 18%. Thermal ablation is an established treatment that is safe and effective. It refers to the local application of controlled heat to induce irreversible cell injury and ultimately tumor apoptosis and necrosis. This approach is particularly suitable for the treatment of small tumors in patients who are not suitable for surgery. However, the lack of suitable benchtop models to assess ablation devices complicates prognostic prediction and the development of effective treatment strategies. In this context, the development of a 3D lung tumor model is presented using a cancer cell‐laden hydrogel composed of 2% hyaluronic acid–tyramine (HA‐TA) and 0.5% agarose, resulting in a tumor mimetic of clinically relevant size. This innovative model provides a valuable platform for testing ablation devices and provides insights that can significantly improve prognostic ability and refine treatment approaches for lung cancer patients.

Multi-crosslinked hydrogel built with hyaluronic acid-tyramine, thiolated glycol chitosan and copper-doped bioglass nanoparticles for expediting wound healing

The migration of fibroblasts and endothelial cells is a critical determinant of wound-healing outcomes for skin injuries. Here, hyaluronic acid-tyramine (HAT) and thiolated glycol chitosan (TGC) conjugates were combined with copper-doped bioglass (ACuBG) nanoparticles to build a novel type of multi-crosslinked hydrogel for stimulating the migration of cells, and thus, expediting wound healing. The optimally devised HAT/TGC/ACuBG gels had markedly improved strength and stiffness compared to the gels built from either HAT or TGC while showing sufficient elasticity, which contributes to stimulating the migration of fibroblasts. The sustainable release of silicon and copper ions from the gels was found to jointly induce the migration of human umbilical vein endothelial cells. The results based on mouse full-thickness skin defects demonstrated that they were able to fully restore the skin defects with formation of complete appendages within two weeks, suggesting their promising potency for use in expediting wound healing.

Enzyme-mediated fabrication of nanocomposite hydrogel microneedles for tunable mechanical strength and controllable transdermal efficiency

Microneedles (MNs) are increasingly used in transdermal drug delivery due to high bioavailability, simple operation, and improved patient compliance. However, further clinical applications are hindered by unsatisfactory mechanical strength and uncontrolled drug release. Herein, an enzyme-mediated approach is reported for the fabrication of nanocomposite hydrogel-based MNs with tunable mechanical strength and controllable transdermal efficiency. As a proof-of-concept, tetrakis(1-methyl-4-pyridinio)porphyrin (TMPyP) was chosen as a model drug for photodynamic therapy of melanoma. TMPyP-loaded PLGA nanoparticles (NP/TMPyP) served as an inner phase of MNs for controlled release of photosensitizers, and enzyme-mediated hyaluronic acid-tyramine (HAT) hydrogels served as an external phase for optimizing the mechanical strength of MNs. By changing the concentration of HRP and H2O2, three types of MNs were fabricated for transdermal delivery of TMPyP, which demonstrated different cross-linking densities and various mechanical strength. Among the three MNs, the HAT-Medium@NP/TMPyP-MN with a medium mechanical strength exhibited the highest values of transdermal efficiency in vitro and the longest retention time in vivo. As compared to pure TMPyP and TMPyP-loaded nanoparticles, the HAT-Medium@NP/TMPyP-MN demonstrated higher anticancer efficacy in both melanoma A375 cells and a xenografted tumor mouse model. Therefore, the enzyme-mediated nanocomposite hydrogel MNs show great promise in the transdermal delivery of therapeutic drugs with enhanced performance. Statement of SignificanceThis study reports an enzyme-mediated approach for the fabrication of photodynamically-active microneedles (HAT@NP/TMPyP-MNs) with tunable mechanical strength and controllable transdermal efficiency. On one hand, HAT hydrogels that bear different cross-linking densities, facilitate tunable mechanical strength and optimized transdermal performances of MNs; on the other hand, NP/TMPyP and HAT network contribute to sustained release of photosensitizers. Comparing to other formulation (i.e., NP/TMPyP or TMPyP), the HAT-Medium@NP/TMPyP-MN exhibited excelling anticancer efficacy in photodynamic therapy in vitro and in vivo. We believe that the combination of enzyme-mediated polymeric cross-linking and slow-releasing nano-vehicles in a single nanocomposite platform provides a versatile approach for the fabrication of MNs with enhanced therapeutic efficacy, which holds great promise in the transdermal delivery of various therapeutic drugs in future.

Decellularized extracellular matrix particle-based biomaterials for cartilage repair applications

Cartilage Decellularized ExtraCellular Matrix (dECM) materials have shown promising cartilage regeneration capacity due to their chondrogenic bioactivity. However, the limited retention of ECM components and the reduced integrity of functional ECM molecules during traditional decellularization processes impair the biomimicry of these materials. The current study aims to fabricate biomimetic materials containing decellularized cartilage particles that have an intact molecular structure and native composition as biomaterial inks and hydrogels for cartilage repair. For this, we established a novel two-fraction decellularization strategy for the preparation of reconstituted dECM (rdECM) particles by mixing the two-fraction components, as well as a one-fraction decellularization strategy for the preparation of biomimetic dECM (bdECM) particles. Hyaluronic acid-tyramine (THA) hydrogels containing rdECM or bdECM particles were produced and characterized via rheological test, swelling and stability evaluation, and compression test. The results showed that our novel decellularization strategies preserved intact proteoglycans and collagen at a higher retention rate with adequate DNA removal compared to traditional methods of decellularization. The addition of rdECM or bdECM particles significantly increased the shear moduli of the THA bioinks while preserving their shear-thinning properties. bdECM particle-embedded THA hydrogels also achieved long-term stability with a swelling ratio of 70% and high retention of glycosaminoglycans and collagen after long-term incubation, while rdECM particle-embedded THA hydrogels showed unsatisfactory stability as self-standing biomaterials. Compared to pure THA hydrogels, the addition of bdECM particles significantly enhanced the compression moduli. In summary, our decellularization methods are successful in the retention of functional and intact cartilage components with high yield. Both rdECM and bdECM particles can be supplemented in THA bioinks for biomimetic cartilage 3D printing. Hydrogels with cartilage bdECM particles possess the functional structure and the natural composition of cartilage ECM, long-term stability, and enhanced mechanical properties, and are promising biomaterials for cartilage repair.

Nanocomposite multifunctional hyaluronic acid hydrogel with photothermal antibacterial and antioxidant properties for infected wound healing

Bacterial infection and subsequent reactive oxygen species (ROS) damage are major factors that delay wound healing in infected skin. Recently, photothermal therapy (PTT), as a new antibacterial method, has shown great advantages in the treatment of infected skin wound. Antibacterial and antioxidant hydrogels can reduce bacterial colonization and infection, scavenge ROS, relieve inflammation, and accelerate wound healing. In this study, an enzyme-crosslinked hyaluronic acid-tyramine (HT) hydrogel loaded with antioxidant and photothermal silver nanoparticles (AgNPs), named HTA, was developed as functional wound dressing to promote the infected skin wound healing. Natural antioxidant tannic acids (TA) were used as both reducing and stabilizing agents to facilely synthesize the silver nanoparticles capped with TA (AgNPs@TA). The incorporation of AgNPs@TA significantly enhanced the antioxidant, antibacterial, photothermal antibacterial, adhesive, and hemostatic abilities of the resulted HTA hydrogel. Besides, HTA hydrogel has rapid gelation, well injection and biocompatibility. In vivo results on the Staphylococcus aureus and Escherichia coli co-infected mouse skin wound model showed that HTA0.4 (containing 0.4 mg/mL AgNPs@TA) hydrogel combined with near infrared ray radiation highly alleviated inflammation, promoted angiogenesis, and accelerated the healing process. Therefore, this nanocomposite hydrogel wound dressing with antibacterial and antioxidant capabilities has great application potential in the treatment of infected skin wounds.

Injectable Cell-Laden Polysaccharide Hydrogels: In Vivo Evaluation of Cartilage Regeneration.

Previously, 5% w/v hyaluronic acid-tyramine (HA-TA) and dextran-tyramine (Dex-TA) enzymatically cross-linked hybrid hydrogels were demonstrated to provide a mechanically stable environment, maintain cell viability, and promote cartilaginous-specific matrix deposition in vitro. In this study, 5% w/v hybrid hydrogels were combined with human mesenchymal stem cells (hMSCs), bovine chondrocytes (bCHs), or a combination of both in a 4:1 ratio and subcutaneously implanted in the backs of male and female nude rats to assess the performance of cell-laden hydrogels in tissue formation. Subcutaneous implantation of these biomaterials showed signs of integration of the gels within the host tissue. Histological analysis showed residual fibrotic capsules four weeks after implantation. However, enhanced tissue invasion and some giant cell infiltration were observed in the HA-TA/Dex-TA hydrogels laden with either hMSCs or bCHs but not with the co-culture. Moreover, hMSC-bCH co-cultures showed beneficial interaction with the hydrogels, for instance, in enhanced cell proliferation and matrix deposition. In addition, we provide evidence that host gender has an impact on the performance of bCHs encapsulated in HA-TA/Dex-TA hydrogels. This study revealed that hydrogels laden with different types of cells result in distinct host responses. It can be concluded that 5% w/v hydrogels with a higher concentration of Dex-TA (≥50%) laden with bCH-hMSC co-cultures are adequate for injectable applications and in situ cell delivery in cartilage regeneration approaches.

Tuning the Cell-Adhesive Properties of Two-Component Hybrid Hydrogels to Modulate Cancer Cell Behavior, Metastasis, and Death Pathways.

This work presents a polysaccharide and protein-based two-component hybrid hydrogel integrating the cell-adhesive gelatin-tyramine (G-Tyr) and nonadhesive hyaluronic acid-tyramine (HA-Tyr) through enzyme-mediated oxidative coupling reaction. The resulting HA-Tyr/G-Tyr hydrogel reflects the precise chemical and mechanical features of the cancer extracellular matrix and is able to tune cancer cell adhesion upon switching the component ratio. The cells form quasi-spheroids on HA-Tyr rich hydrogels, while they tend to form an invasive monolayer culture on G-Tyr rich hydrogels. The metastatic genotype of colorectal adenocarcinoma cells (HT-29) increases on G-Tyr rich hydrogels which is driven by the material’s adhesive property, and additionally confirmed by the suppressed gene expressions of apoptosis and autophagy. On the other hand, HA-Tyr rich hydrogels lead the cells to necrotic death via oxidative stress in quasi-spheroids. This work demonstrates the ideality of HA-Tyr/G-Tyr to modulate cancer cell adhesion, which also has potential in preventing primary metastasis after onco-surgery, biomaterials-based cancer research, and drug testing.

Injectable enzyme-catalyzed crosslinking hydrogels as BMSCs-laden tunable scaffold for osteogenic differentiation

Bone defects caused by trauma or tumor are a significant challenge in clinical practice. Hydrogel-based tissue engineering has been considered an effective strategy. This study successfully formed a series of injectable hydrogels by enzyme-catalyzed crosslinking hyaluronic acid-tyramine (HA-TA) and sodium alginate-tyramine (ALG-TA) under physiological conditions in the presence of both horseradish peroxidase and hydrogen peroxide. The morphology, mechanical properties, swelling properties, and biodegradation properties of hydrogels were investigated. The results showed that the mechanical properties, swelling properties and biodegradation of HA/ALG hydrogels varied with the precursor solution concentration. Furthermore, the proliferation and osteogenic differentiation of BMSCs within the HA/ALG hydrogels were evaluated in vitro. The results illustrated that the hydrogels could offer an excellent microenvironment for BMSCs growth and promote osteogenic differentiation. Therefore, the injectable hydrogels can be used as an effective 3 D scaffold for bone repair and regeneration.

Enzymatic co-crosslinking of star-shaped poly(ethylene glycol) tyramine and hyaluronic acid tyramine conjugates provides elastic biocompatible and biodegradable hydrogels.

A combination of the viscoelastic properties of hyaluronic acid (HA) and the elastic properties of star shaped 8-arm poly(ethylene glycol) (8-arm PEG) was used to design in-situ forming hydrogels. Hydrogels were prepared by the enzymatic crosslinking of a partially tyramine modified 8-arm PEG and a tyramine conjugated HA using horseradish peroxidase in the presence of hydrogen peroxide. Hydrogels of the homopolymer conjugates and mixtures thereof were rapidly formed within seconds under physiological conditions at low polymer and enzyme concentrations. Elastic hydrogels with high gel content (≥95%) and high storage moduli (up to 22.4 kPa) were obtained. An in vitro study in the presence of hyaluronidase (100 U/mL) revealed that with increasing PEG content the degradation time of the hybrid hydrogels increased up to several weeks, whereas hydrogels composed of only hyaluronic acid degraded within 2 weeks. Human mesenchymal stem cells (hMSCs) incorporated in the hybrid hydrogels remained viable as shown by a PrestoBlue and a live-dead assay, confirming the biocompatibility of the constructs. The production of an extracellular matrix by re-differentiation of encapsulated human chondrocytes was followed over a period of 28 days. Gene expression indicated that these highly elastic hydrogels induced an enhanced production of collagen type II. At low PEG-TA/HA-TA ratios a higher expression of SOX 9 and ACAN was observed. These results indicate that by modulating the ratio of PEG/HA, injectable hydrogels can be prepared applicable as scaffolds for tissue regeneration applications.

In situ forming and biocompatible hyaluronic acid hydrogel with reactive oxygen species-scavenging activity to improve traumatic brain injury repair by suppressing oxidative stress and neuroinflammation.

The efficacy of neural repair and regeneration strategies for traumatic brain injury (TBI) treatment is greatly hampered by the harsh brain lesion microenvironment including oxidative stress and hyper-inflammatory response. Functionalized hydrogel with the capability of oxidative stress suppression and neuroinflammation inhibition will greatly contribute to the repairment of TBI. Herein, antioxidant gallic acid-grafted hyaluronic acid (HGA) was combined with hyaluronic acid-tyramine (HT) polymer to develop an injectable hydrogel by dual-enzymatically crosslinking method. The resulting HT/HGA hydrogel is biocompatible and possesses effective scavenging activity against DPPH and hydroxyl radicals. Meanwhile, this hydrogel improved cell viability and reduced intracellular reactive oxygen species (ROS) production under H2O2 insult. The in vivo study showed that in situ injection of HT/HGA hydrogel significantly reduced malondialdehyde (MDA) production and increased glutathione (GSH) expression in lesion area after treatment for 3 or 21 days, which might be associated with the activation of Nrf2/HO-1 pathway. Furthermore, this hydrogel promoted the microglia polarization to M2 (Arg1) phenotype, it also decreased the level of proinflammatory factors including TNF-α and IL-6 and increased anti-inflammatory factor expression of IL-4. Finally, blood-brain barrier (BBB) was protected, neurogenesis in hippocampus was promoted, and the motor, learning and memory ability was enhanced. Therefore, this injectable, biocompatible, and antioxidant hydrogel exhibits a huge potential for treating TBI and allows us to recognize the great value of this novel biomaterial for remodeling brain structure and function.

A bioinspired gelatin-hyaluronic acid-based hybrid interpenetrating network for the enhancement of retinal ganglion cells replacement therapy

Biomaterial-based cell replacement approaches to regenerative medicine are emerging as promising treatments for a wide array of profound clinical problems. Here we report an interpenetrating polymer network (IPN) composed of gelatin-hydroxyphenyl propionic acid and hyaluronic acid tyramine that is able to enhance intravitreal retinal cell therapy. By tuning our bioinspired hydrogel to mimic the vitreous chemical composition and mechanical characteristics we were able to improve in vitro and in vivo viability of human retinal ganglion cells (hRGC) incorporated into the IPN. In vivo vitreal injections of cell-bearing IPN in rats showed extensive attachment to the inner limiting membrane of the retina, improving with hydrogels stiffness. Engrafted hRGC displayed signs of regenerating processes along the optic nerve. Of note was the decrease in the immune cell response to hRGC delivered in the gel. The findings compel further translation of the gelatin-hyaluronic acid IPN for intravitreal cell therapy.

Phenol-Hyaluronic Acid Conjugates: Correlation of Oxidative Crosslinking Pathway and Adhesiveness.

Hyaluronic acid (HA) is a natural polysaccharide with great biocompatibility for a variety of biomedical applications, such as tissue scaffolds, dermal fillers, and drug-delivery carriers. Despite the medical impact of HA, its poor adhesiveness and short-term in vivo stability limit its therapeutic efficacy. To overcome these shortcomings, a versatile modification strategy for the HA backbone has been developed. This strategy involves tethering phenol moieties on HA to provide both robust adhesiveness and intermolecular cohesion and can be used for oxidative crosslinking of the polymeric chain. However, a lack of knowledge still exists regarding the interchangeable phenolic adhesion and cohesion depending on the type of oxidizing agent used. Here, we reveal the correlation between phenolic adhesion and cohesion upon gelation of two different HA–phenol conjugates, HA–tyramine and HA–catechol, depending on the oxidant. For covalent/non-covalent crosslinking of HA, oxidizing agents, horseradish peroxidase/hydrogen peroxide, chemical oxidants (e.g., base, sodium periodate), and metal ions, were utilized. As a result, HA–catechol showed stronger adhesion properties, whereas HA–tyramine showed higher cohesion properties. In addition, covalent bonds allowed better adhesion compared to that of non-covalent bonds. Our findings are promising for designing adhesive and mechanically robust biomaterials based on phenol chemistry.

Engineering of Optimized Hydrogel Formulations for Cartilage Repair.

The ideal scaffold for cartilage regeneration is expected to provide adequate mechanical strength, controlled degradability, adhesion, and integration with the surrounding native tissue. As it does this, it mimics natural ECMs functions, which allow for nutrient diffusion and promote cell survival and differentiation. Injectable hydrogels based on tyramine (TA)-functionalized hyaluronic acid (HA) and dextran (Dex) are a promising approach for cartilage regeneration. The properties of the hydrogels used in this study were adjusted by varying polymer concentrations and ratios. To investigate the changes in properties and their effects on cellular behavior and cartilage matrix formation, different ratios of HA- and dextran-based hybrid hydrogels at both 5 and 10% w/v were prepared using a designed mold to control generation. The results indicated that the incorporation of chondrocytes in the hydrogels decreased their mechanical properties. However, rheological and compression analysis indicated that 5% w/v hydrogels laden with cells exhibit a significant increase in mechanical properties after 21 days when the constructs are cultured in a chondrogenic differentiation medium. Moreover, compared to the 10% w/v hydrogels, the 5% w/v hybrid hydrogels increased the deposition of the cartilage matrix, especially in constructs with a higher Dex–TA content. These results indicated that 5% w/v hybrid hydrogels with 25% HA–TA and 75% Dex–TA have a high potential as injectable scaffolds for cartilage tissue regeneration.

Intratumoral Injection of Anlotinib Hydrogel Combined With Radiotherapy Reduces Hypoxia in Lewis Lung Carcinoma Xenografts: Assessment by Micro Fluorine-18-fluoromisonidazole Positron Emission Tomography/Computed Tomography Hypoxia Imaging.

Hypoxia is a common feature of solid tumors that increases tumor invasiveness and resistance to radiotherapy (RT) and chemotherapy. Local application of anlotinib (AL) might increase the regulation of new blood vessel growth and improve tumor hypoxia in RT. Therefore, it is essential to fully understand the drug delivery system of AL. Herein, we applied hypoxia imaging using micro fluorine-18-fluoromisonidazole positron emission tomography/computed tomography (micro 18F-FMISO PET/CT) to assess responses to intratumoral injections of an AL hydrogel (AL-HA-Tyr) combined with RT in mice bearing Lewis lung carcinoma (LLC). We formed AL-HA-Tyr by encapsulating AL with hyaluronic acid-tyramine (HA-Tyr) conjugates via the oxidative coupling of tyramine moieties catalyzed by H2O2 and horseradish peroxidase. AL-HA-Tyr restrained the proliferation of human umbilical endothelial cells (HUVECs) in colony formation assays in vitro (p < 0.001). We established a subcutaneous LLC xenograft model using C57BL/6J mice that were randomly assigned to six groups that were treated with AL, HA-Tyr, AL-HA-Tyr, RT, and RT+AL-HA-Tyr, or untreated (controls). Tumor volume and weight were dynamically measured. Post treatment changes in hypoxia were assessed in some mice using micro 18F-FMISO PET/CT, and survival was assessed in others. We histopathologically examined toxicity in visceral tissues and Ki-67, VEGF-A, γ-H2AX, and HIF-1α expression using immunohistochemistry. Direct intratumoral injections of AL-HA-Tyr exerted anti-tumor effects and improved hypoxia like orally administered AL (p > 0.05), but reduced visceral toxicity and prolonged survival. The uptake of 18F-FMISO did not significantly differ among the AL, AL-HA-Tyr, and RT+AL-HA-Tyr treated groups. Compared with the other agents, RT+AL-HA-Tyr decreased HIF-1α, Ki67, and VEGF-A expression, and increased γ-H2AX levels in tumor cells. Overall, compared with AL and AL-HA-Tyr, RT+AL-HA-Tyr improved tumor hypoxia, enhanced anti-tumor effects, and prolonged the survival of mice bearing LLC.

Controlling Growth Factor Diffusion by Modulating Water Content in Injectable Hydrogels.

Recent advancements in the delivery of therapeutics for retinal diseases include the development of injectable hydrogels, networks of one or more hydrophilic polymers that contain a high-volume fraction of water. These systems are of particular interest due to their biocompatibility, permeability to water-soluble metabolites, and function as minimally invasive injectable delivery vehicles. Recently, hydrogels for ophthalmic applications have been developed that display a controlled release of factors necessary for cellular survival and proliferation. Understanding the relationship between the volume water fraction and the physical, chemical, and diffusion properties of the hydrogel scaffold could aid in the improvement of existing drug delivery treatments for retinal regeneration. In this study, we compared the diffusion and release of human epidermal growth factor (hEGF) encapsulated in different injectable homogenous and heterogenous hydrogels, namely gelatin-hydroxyphenyl propionic acid (Gtn-HPA) and hyaluronic acid-tyramine (HA-Tyr)-based hydrogels. These experimental results were compared with the measured stiffness and water content of these hydrogels and applied to different diffusion theories of polymers to determine the model of best fit. We find that the normalized diffusion and release of hEGF increases with free water content in injectable hydrogels: ranging from 0.176 at 41% free water in HA-Tyr to 0.2 at 53% free water in Gtn-HPA, whereas it decreases with hydrogel stiffness: 600 Pa for Gtn-HPA and 1440 Pa for HA-Tyr. Further, we compared our experimental data with theoretical diffusion models. We found that homogeneous theoretical models, notably the hydrodynamic model (giving a normalized diffusion close to 0.2), provide the most suitable explanation for the measured solute diffusion coefficient. Impact statement Diffusion in a three-dimensional system is a key factor in designing new hydrogel-based materials. It allows to control and predict diffusion in implants and delivery systems. However, very little is done to explore and test the diffusion since it is a complex process. Many models can predict solute diffusion; however, practical application using these models has not yet been done. We have shown the variation of these models in a practical extent, which could have a tremendous impact on designing biomaterial for biological application as it allows one to understand the diffusion of injected drugs and growth factors.

Anti-tumor effect of local injectable hydrogel-loaded endostatin alone and in combination with radiotherapy for lung cancer

Endostatin (ES) can effectively inhibit neovascularization in most solid tumors and has the potential to make oxygen delivery more efficient and increase the efficacy of radiotherapy (RT). With a short half-life, ES is mainly administered systemically, which leads to low intake in tumor tissue and often toxic systemic side effects. In this study, we used hyaluronic acid-tyramine as a carrier to synthesize an ES-loaded hydrogel drug (ES/HA-Tyr) that can be injected locally. ES/HA-Tyr has a longer half-life and fewer systemic toxic side effects, and it exerts a better anti-angiogenic effect and anti-tumor effect with RT. In vitro, ES/HA-Tyr showed sustained release in the release assay and a stronger ability to inhibit the proliferation of human umbilical vascular endothelial cells (HUVECs) in the MTT assay; it exhibited a more potent effect against HUVEC invasion and a stronger anti-angiogenic effect on HUVECs in tube formation. In vivo, ES/HA-Tyr increased local drug concentration, decreased blood drug concentration, and caused less systemic toxicity. Further, ES/HA-Tyr effectively reduced tumor microvessel density, increased tumor pericyte coverage, decreased tumor hypoxia, and increased RT response. ES/HA-Tyr + RT also had increased anti-tumor and anti-angiogenic effects in Lewis lung cancer (LLC) xenograft models. In conclusion, ES/HA-Tyr showed sustained release, lower systemic toxicity, and better anti-tumor effects than ES. In addition, ES/HA-Tyr + RT enhanced anti-angiogenic effects, reduced tumor hypoxia, and increased the efficacy of RT in LLC-bearing mice.

Optimization of hyaluronic acid-tyramine/silk-fibroin composite hydrogels for cartilage tissue engineering and delivery of anti-inflammatory and anabolic drugs

Injury of articular cartilage leads to an imbalance in tissue homeostasis, and due to the poor self-healing capacity of cartilage the affected tissue often exhibits osteoarthritic changes. In recent years, injectable and highly tunable composite hydrogels for cartilage tissue engineering and drug delivery have been introduced as a desirable alternative to invasive treatments. In this study, we aimed to formulate injectable hydrogels for drug delivery and cartilage tissue engineering by combining different concentrations of hyaluronic acid-tyramine (HA-Tyr) with regenerated silk-fibroin (SF) solutions. Upon enzymatic crosslinking, the gelation and mechanical properties were characterized over time. To evaluate the effect of the hydrogel compositions and properties on extracellular matrix (ECM) deposition, bovine chondrocytes were embedded in enzymatically crosslinked HA-Tyr/SF composites (in further work abbreviated as HA/SF) or HA-Tyr hydrogels. We demonstrated that all hydrogel formulations were cytocompatible and could promote the expression of cartilage matrix proteins allowing chondrocytes to produce ECM, while the most prominent chondrogenic effects were observed in hydrogels with HA20/SF80 polymeric ratios. Unconfined mechanical testing showed that the compressive modulus for HA20/SF80 chondrocyte-laden constructs was increased almost 10-fold over 28 days of culture in chondrogenic medium which confirmed the superior production of ECM in this hydrogel compared to other hydrogels in this study. Furthermore, in hydrogels loaded with anabolic and anti-inflammatory drugs, HA20/SF80 hydrogel showed the longest and the most sustained release profile over time which is desirable for the long treatment duration typically necessary for osteoarthritic joints. In conclusion, HA20/SF80 hydrogel was successfully established as a suitable injectable biomaterial for cartilage tissue engineering and drug delivery applications.

Growth‐Factor Free Multicomponent Nanocomposite Hydrogels That Stimulate Bone Formation

AbstractSynthetic osteo‐promoting materials that are able to stimulate and accelerate bone formation without the addition of exogenous cells or growth factors represent a major opportunity for an aging world population. A co‐assembling system that integrates hyaluronic acid tyramine (HA‐Tyr), bioactive peptide amphiphiles (GHK‐Cu2+), and Laponite (Lap) to engineer hydrogels with physical, mechanical, and biomolecular signals that can be tuned to enhance bone regeneration is reported. The central design element of the multicomponent hydrogels is the integration of self‐assembly and enzyme‐mediated oxidative coupling to optimize structure and mechanical properties in combination with the incorporation of an osteo‐ and angio‐promoting segments to facilitate signaling. Spectroscopic techniques are used to confirm the interplay of orthogonal covalent and supramolecular interactions in multicomponent hydrogel formation. Furthermore, physico‐mechanical characterizations reveal that the multicomponent hydrogels exhibit improved compressive strength, stress relaxation profile, low swelling ratio, and retarded enzymatic degradation compared to the single component hydrogels. Applicability is validated in vitro using human mesenchymal stem cells and human umbilical vein endothelial cells, and in vivo using a rabbit maxillary sinus floor reconstruction model. Animals treated with the HA‐Tyr‐HA‐Tyr‐GHK‐Cu2+ hydrogels exhibit significantly enhanced bone formation relative to controls including the commercially available Bio‐Oss.

Enzymatically Crosslinkable Hyaluronic Acid-Gelatin Hybrid Hydrogels as Potential Bioinks for Tissue Regeneration

Hydrogels that mimic the composition and properties of the extracellular matrix have attracted great attention as potential polymeric scaffolds for tissue engineering applications. In this study, an injectable hydrogel composed of hyaluronic acid and gelatin was developed via the oxidative coupling reaction using horseradish peroxidase (HRP). The hydrogel was prepared by mixing two phenol-conjugated polymer solutions, hyaluronic acid-tyramine (HA-TA) and gelatin-hydroxyphenyl propionic acid (GH), in the presence of HRP and hydrogen peroxide (H202). The gelation rate and mechanical properties of composite hydrogel were controlled by adjusting the HRP and H202 concentrations, respectively Compared to the pure HA-TA hydrogels, the stability and cellular behaviors of composite hydrogel improved significantly In addition, the injectable hydrogel system showed good performance in 3D printing with high cell viability after one day of printing. The results suggest that enzymatically crosslinked HA-TA and GH hybrid (HA-TA/GH) composite of HA-TA and GH hydrogel has the potential as a material for tissue engineering and 3D printing biofabrication.