Humeral Angle Research Articles

<i>Andrena nimigracilis,</i> a New Species (Hymenoptera: Andrenidae) from México

Andrena nimigracilis Zabinski, new species, is described from a single male specimen from the state of Michoacán in México. It can be distinguished from males of all other species of North American Andrena by the following combination of characters: metasoma extremely narrow, humeral angle extremely weak, propodeum declivitous, genal area small, compound eye wide compared to its length, pretarsal claws with tooth, vertex ≤1.5x lateral ocellar diameter, and wings hyaline. Due to this unique morphology, this species currently cannot be placed into any Andrena subgenus, therefore placed as subgenus incertae sedis.

Repeatability of two methods for estimating scapular kinematics during dynamic functional tasks

Best practices for scapular motion tracking are still being determined. The repeatability of different scapular kinematic procedures needs to be evaluated. The purpose of this study was to assess the test-retest reliability of two scapular kinematic procedures: double calibration with AMC (D-AMC) and individualized linear modelling (LM). Ten healthy participants had their upper body movement tracked with optical motion capture in two identical sessions. Five scapular calibration poses were performed, and seven dynamic functional tasks were tested. Scapular angles were calculated from both procedures (D-AMC vs LM). The D-AMC approach uses two poses (neutral and maximum elevation) and tracks the scapula with a rigid cluster, while the LM approach predicts scapular positioning from humeral angles based on equations built from the calibration pose data. Angle waveforms and repeatability outcomes were compared. Internal and upward rotation angle waveforms were significantly different (p < 0.05) between kinematic procedures for some tasks, with maximum mean differences up to 17.3° and 23.2°, respectively. Overall, repeatability outcomes were similar between procedures, but the LM approach was slightly better for tilt and the D-AMC approach was notably improved for upward rotation in certain tasks. For example, minimal detectable changes during the Forward Transfer ranged from 6.9° to 11.9° for the D-AMC and 8.9° to 25.3° for the LM. Discrepancies between procedures may be a function of the calibration poses chosen. Additional calibration poses may improve the comparisons between procedures.

First mitogenomic characterization of Macromotettixoides (Orthoptera, Tetrigidae), with the descriptions of two new species.

Classification of species is commonly based on morphological, molecular, and distribution depending on the taxa. Macromotettixoides Zheng, Wei & Jiang, 2005 and Formosatettix Tinkham, 1937 are both wingless types of Tetrigidae with extremely similar morphological characteristics, and in the current taxonomic system they are placed in two different subfamilies, Metrodorinae and Tetriginae, respectively. It is difficult to clearly identify the species of these two genera by morphological characteristics, and molecular data is often needed to assist identification. Here, the complete mitogenomes of two new species were sequenced and assembled, with that of Macromotettixoidesorthomargina. Molecular data of species of Formosatettix were used to test the monophyly of Macromotettixoides and to re-assess the generic characters, and also to test whether Macromotettixoides belongs to the Asian Metrodorinae or Tetriginae. Furthermore, mitochondrial characteristics were analyzed and the phylogeny of the Tetrigidae reconstructed based on mitochondrial protein-coding genes (PCGs). The results indicated that the two new species were clustered with Macromotettixoides rather than Formosatettix, and the anterior margin of the fastigium and pronotum of the two new species usually had the humeral angle different from that of Formosatettix. Therefore, after integrating morphological and molecular data, the two new species were placed in the genus Macromotettixoides, M.maoershanensissp. nov. and M.brachycornasp. nov. Finally, a phylogenetic reconstruction supported Macromotettixoides being assigned to Tetriginae rather than Metrodorinae, in contrast to the previous classification of this genus.

Do Sex and Age Influence Scapular and Thoracohumeral Kinematics During a Functional Task Protocol?

There is mixed evidence on the role that biological sex plays in shoulder biomechanics despite known differences in musculoskeletal disorder prevalence between males and females. Additionally, advancing age may contribute to shoulder kinematic changes. The purpose of this study was to determine if sex and age influenced scapular and thoracohumeral kinematics during a range of functional tasks. Sixty healthy participants aged 19-63years (30 males; 30 females) completed a functional task protocol while their upper limb motion was recorded. Scapular and humeral angles were calculated and compared with multiple linear regressions to assess the interaction effects of sex and age. Shoulder kinematics were not different between sex and age groups for many of the functional tasks. However, females had lower humeral external rotation in the overhead lift task (15°, P < .001), and less scapular anterior tilt angles in the forward transfer task (6°, P < .001) than males. Age was positively associated with humeral elevation (R2 = .330, P < .001) and scapular rotation (R2 = .299, P < .001) in the Wash Axilla task. There exist some kinematic differences between sex and with advancing age for select functional tasks, which should be considered for musculoskeletal disorder development.

Miradessus gen. nov. from South America described for two species previously in Amarodytes Régimbart, 1900 and two new species (Arthropoda, Insecta, Coleoptera, Adephaga, Dytiscidae, Hydroporinae, Bidessini).

Miradessusgen. nov. is described for two previously described species, Amarodytespulchellus Guignot, 1955 from Colombia, with new records from Venezuela, and A.plaumanni Gschwendtner, 1935, from Brazil, and two previously unknown species, Miradessusbenisp. nov., from Bolivia and Peru, and Miradessusrikaesp. nov. from Ecuador. The genus is characterized by 1) occipital line absent; 2) basal pronotal striae present; 3) basal elytral stria absent; 4) sutural elytral stria absent; 5) transverse carina on elytral epipleuron at humeral angle absent; 6) distinct marginal bead on anterior clypeal margin absent; and 7) male median lobe deeply multilobed with a dorsal portion separate from a unilobed or bilobed ventral portion.

Defining humeral axial rotation with optical motion capture and inertial measurement units during functional task assessment.

Humeral motion can be challenging to measure and analyze. Typically, Euler/Cardan sequences are used for humeral angle decomposition, but choice of rotation sequence has substantial effects on outcomes. A new method called True axial rotation calculation may be more precise. The objective of this study is to compare humeral axial rotation measured from two systems (optical motion capture and inertial measurement units (IMUs)) and calculated with two methods (Euler angles and True axial). Motion of torso and dominant humerus of thirty participants free from any upper limb impairments was tracked using both systems. Each participant performed a functional tasks protocol. Humeral axial rotation was calculated with Euler decomposition and the True axial method. Waveforms were compared with two-way ANOVA statistical parametric mapping. A consistent pattern emerged: axial rotation was not different between motion capture systems when using the True axial method (p > .05), but motion capture systems showed relatively large magnitude differences (~ 20-30°) when using Euler angle calculation. Between-calculation method differences were large for both motion capture systems. Findings suggest that the True axial rotation method may result in more consistent findings that will allow for precise measurements and comparison between motion capture systems. Two methods for calculating humeral axial rotation measured from optical motion capture and inertial measurement units were compared.

The effect of EMG biofeedback training on muscle activation in an impingement population

Subacromial impingement syndrome (SAIS) is one of the most diagnosed causes of pain in the upper extremity. The purpose of this study was to investigate muscle activity between asymptomatic and SAIS shoulders on the same subject while understanding the effectiveness of EMG biofeedback training (EBFB) on bilateral overhead movements. Ten participants (7 male), that tested positive for 2/3 SAIS clinical tests, volunteered for the study. Bilateral muscle activity was measured via electrodes on the upper trapezius (UT), lower trapezius (LT), serratus anterior (SA), and lumbar paraspinals (LP). Participants performed bilateral scapular plane overhead movements before and after EBFB. EBFB consisted of 10 bilateral repetitions of I, W, T, and Y exercises focused on reducing UT and increasing LT and SA activity. Prior to EBFB, no significant difference in muscle activity was present between sides. A significant main effect of time indicated that after EBFB both sides exhibited reduced UT activity at 60° (p=0.003) and 90° (p=0.036), LT activity was increased at all measured humeral angles (p<0.0005), and SA muscle activity was increased at 110° (p=0.001). EBFB in conjunction with scapular based exercise effectively alters muscle activity of asymptomatic and symptomatic scapular musculature.

Defining repeatability for scapulothoracic and thoracohumeral motion during the novel work-related activities and functional task (WRAFT) protocol

Upper limb motion can be challenging to measure and analyze during work or daily life tasks. Further, humeral angle calculation method substantially influences angle outcomes. Therefore, the purpose of this study was to assess the repeatability of scapular and humeral kinematics and compare thoracohumeral angle calculation during a work-related and functional task (WRAFT) protocol. Thirty healthy young adults completed the WRAFT protocol (Comb Hair, Wash Axilla, Tie Apron, Overhead Reach, Side Reach, Forward Transfer, Floor Lift, and Overhead Lift) on two separate occasions. Peak humeral angles and select scapular angles were extracted for each task. Intra-class correlation coefficients (ICCs), standard error of measurement, and minimal detectable change (MDC) were examined. Humeral angles were compared using the XZY and ZXY rotation sequences and “true” axial rotation for incidence of gimbal lock and amplitude coherence. Results showed that for scapular kinematics, elevation-based WRAFTs produced overall better ICC scores (0.23–0.90) compared to those tasks primarily driven by lateral humeral motion (0.02–0.84). MDCs ranged from 7°–78°, suggesting some tasks demonstrated good repeatability (Comb Hair, Overhead Reach, Floor Lift), while others had very high variability (Side Reach, Tie Apron). Amplitude coherence for thoracohumeral angles was best for ZXY for all tasks except the Comb Hair and Tie Apron, for which XZY is recommended. “True” axial rotation demonstrated good coherence for all but Tie Apron. The WRAFT protocol may be used for functionally relevant scapular and humeral kinematic assessment for select task and posture combinations.

A new flightless species of Phoberus Macleay, 1819 (Coleoptera: Trogidae) from the Eastern Cape Province in South Africa

The loss of flight is common in the keratin beetle genus Phoberus Macleay, 1819 (Coleoptera: Trogidae)-20 out of the 49 species in this genus exhibit metathoracic-wing reduction in various degrees rendering them flightless. In this paper another flightless species, Phoberus villeti Strümpher, new species, is described and illustrated from the Amathole mountains in the Eastern Cape Province of South Africa. The new species is micropterous having tightly fused elytra (only wing rudiments visible), rounded humeral angles and a characteristic rounded body shape. However, it is most notable for its large size (~12 mm) and the distinctive tufts of yellow setae present on the elytra.

Biological aspects of crosses between populations of Triatoma mexicana (Hemiptera: Reduviidae: Triatominae).

We examined the degree of reproductive isolation in four populations of Triatoma mexicana Herrich-Schaeffer from Mexico along with fertility and the segregation of morphological characteristics in two generations of offspring from crosses between these populations. The percentage of couples with (fertile) offspring was high among all sets of crosses between cohorts from Peñamiller, Meztitlán, and Orizabita. It was low in crosses involving a cohort from Tierra Blanca, mainly in crosses with Meztitlán. Among sets of crosses involving Tierra Blanca specimens, whole first-generation (F1) individuals were morphologically similar to the specimens from other locations. All F1 individuals of crosses involving Peñamiller looked like Peñamiller. However, in crosses between F1 and F1 progeny of parental crosses, alleles for size, overall color, length of head, ante and post ocular distance, and humeral angle apparently had Mendelian dominant/recessive relationships. The cohorts from Peñamiller and Meztitlán seemed to be dominant with respect to Orizabita and Tierra Blanca. Results indicated that cohorts from Peñamiller, Meztitlán, and Orizabita were not reproductively isolated. In contrast, Tierra Blanca was reproductively isolated from the other three populations of T. mexicana and is apparently undergoing an early divergence process of speciation for allopatry.

Diagnose of the nominal subgenus of Edessa and description&lt;br&gt;of the E. sexdens group (Heteroptera, Pentatomidae, Edessinae)

The subgenus Edessa, the largest and to date the most confusing taxon of Edessa is diagnosed here, comprising 79 species listed in this work. The subgenus is characterized by the humeral angles conical, somewhat developed, and projected, with apex rounded or somewhat acuminated, but never acute, shyny and impunctate or with a few punctures. The E. sexdens group, composed of 22 species, is proposed here to the subgenus Edessa. This group can be characterized by the anterior arms of the metasternal process with excavated apex; connexival segments with a pair of dark spots; ventral side of the abdomen raised medially; rounded shallow excavation near each spiracle; area between dorsal rim of the pygophore and posterolateral angles grooved; superior process of the genital cup laminar and continued ventrally by a carina, oblique to the parameres; parameres with three lobes; area between dorsal rim of the pygophore and posterolateral angles grooved. The species of the E. sexdens group are distributed in the Neotropical region, from Mexico to Argentina. Descriptions, measurements, and illustrations are provided. An identification key and distributional map are presented. The species Edessa suturata Dallas, 1851 is considered junior synonym of E. alces Erichson, 1848; E. inclyta Walker, 1868, E. fuscidorsata Distant, 1881, and E. gnu Breddin, 1905 are considered junior synonyms of E. electa Walker, 1868; E. olivacea Stål, 1862 and E. ventralis Walker, 1868 are considered junior synonym of E. phoenicopus Dallas, 1851; E. nigromarginata Distant, 1881 is considered junior synonym of E. sexdens Fabricius, 1803; E. subandina Breddin, 1994 is considered a valid species; Edessa dentata (Dallas, 1851) and Edessa excellens (Walker, 1868) are considered junior synonym of E. (E.) urus Erichson, 1848.

Odara, a new genus to Edessinae (Hemiptera, Pentatomidae) with Eleven New Species

Abstract The genus Odara gen. n. is here described and composed exclusively of new species: Odara ori sp. n., Odara amazonica sp. n., Odara caribensis sp. n., Odara dracula sp. n., Odara maculatus sp. n., Odara osaensis sp. n., Odara peruensis sp. n., Odara rondoniensis sp. n., Odara tambopatensis sp. n., Odara umbabarauma sp. n. and Odara variegata sp. n. The new genus is characterized by the dorsal coloration green, humeral angles tooth-like generally with black apices, corium dark brown to black with yellow veins, parameres spearhead-shaped, and the sclerotized swelling of the ductus receptaculi in the female internal genitalia. The species are distributed from Central America to the Atlantic coast of South America, from Costa Rica to Rio de Janeiro [Brazil]. Diagnosis, keys to the species, and distributional maps are provided. Photographs of dorsal and ventral view, pygophore, female genital plates, male and female internal genitalia are also provided.

Review of the Chinese species of the genus Scelimena Serville, 1838 (Tetrigidae: Scelimeninae: Scelimenini)

A brief preliminary revision of the genus Scelimena Serville, 1838 (Tetrigidae: Scelimeninae: Scelimenini) from PR China is presented. Scelimena pyrroma Lao, Kasalo, Gao, Deng et Skejo sp. nov. is described from Hainan, Ding'an, based on a female holotype and a male paratype, and an additional photograph of a female in the natural habitat from Wuzhi National Nature Reserve (Wuzhi-shan Mountain). Specimens of this new species were hitherto reported from Hainan as S. dentiumeris (Hancock, 1907), a species endemic to Borneo. The new species is easily distinguished from its congeners by the presence of prominent yellow humeral tubercles and by the lateral pronotal spines directed forwards. The new species from Hainan and S. chinensis (Hancock, 1915) from Vietnam are assigned to Scelimena producta species group based on the similarity with S. producta (Serville, 1838), which is characterized by the humeral angles with tubercles, wide vertex, and toothed ventral margins of hind femora, while S. boettcheri Günther, 1938 from Palawan is assigned to Scelimena discalis species group, based on the tuberculated median carina. Scelimena dammermanni Günther, 1938, stat. nov., hitherto regarded as a subspecies of S. producta, is elevated to a species level because it lacks ventral spines on the hind legs, present in all S. producta individuals. New synonymy is established: Scelimena melli Günther, 1938, =Scelimena brevispina Cao et Zheng, 2011, syn. nov.; =Scelimena wulingshana Zheng, 1993, syn. nov.; =Eufalconoides guizhouensis Zheng et Shi, 2006, syn. nov. Scelimena melli, S. guangxiensis Zheng et Jiang, 1994 from southern China and S. kempi (Hancock, 1915) from NE India are assigned to S. bellula species group on the basis of similarity to S. bellula Storozhenko et Dawwrueng, 2015. Further research should determine whether S. spicupennis Zheng & Ou, 2003 represents a valid species or a synonym of another Scelimena species, as well as if S. nitidogranulosa Günther, 1938 and S. guangxiensis Zheng & Jiang, 1994 represent separate species or whether they are conspecific. Specimens of S. nitidogranulosa from Hainan reported by Liang & Zheng in 1998 are in fact Platygavialidium sinicum Günther, 1939. Scelimena songkrana Zha et Wen, 2017 is recorded from China for the first time. A key to Scelimena species found in PR China is also provided.

Bizarre morphology in extinct Eocene bugs (Heteroptera: Pentatomidae).

Newly discovered fossil bugs (Insecta: Hemiptera: Heteroptera: Pentatomidae) from the Eocene of Messel (Germany) and Green River (North America) exhibit an exaggerated morphology including prominent spiny humeral and anterolateral angles of the pronotum and a spiny lateral abdominal margin. Especially the humeral angles are unique; they consist of expansive, rounded projections with strong spines, which is a rare trait among pentatomids. A hypothesis for the function of this extreme morphology is defence against small vertebrate predators, such as birds or reptiles. The same protuberances also produce a disruptive effect camouflaging the specimen in its environment and provide additional protection. Therefore, the extreme morphology provides primary as well as secondary anti-predator defence. The morphology of Eospinosus peterkulkai gen. et sp. nov. and E. greenriverensis sp. nov. resembles that of Triplatygini, which today occur exclusively in Madagascar, as well as that of Discocephalinae or Cyrtocorinae, which today occur in the Neotropics. Due to a lack of conclusive characters, it cannot be excluded that the fossil species may represent a case of remarkable convergence and are not related to either taxon. Phylogenetic analyses using parsimony as well as Bayesian algorithms confirmed that the new genus is a member of Pentatomidae, but could not solve its phylogenetic relationships within Pentatomidae.

A STUDY OF MORPHOMETRIC ANALYSIS AND MEASUREMENT OF ANGLE OF TORSION OF THE HEAD OF HUMERUS AND SHOULDER ARTHROPLASTY

Back ground: Humerus is the longest of the long bones of superior extremity.It”s head articulates with scapular glenoid cavity to form the gleno-humeral/Shoulder joint.The rounded head of Humerus is too weakly supported in the scapular glenoid cavity lined by glenoid labrum which makes it the most mobile and most unstable nd joint and so most commonly dislocated joint of the human body.Also the humeral head part is the 2 most important part of shoulder arthroplasty. Aim of the study is to make a clinical evaluation of parameters used in prosthesis design for the humeral component applied in arthroplasty of the proximal upper extremity. Methods: A total of 100 (Rt -58,Lt –42 ) dry human Humerus available in the Department of Anatomy of Calcutta National Medical College,Kolkata,West Bengal and Nilratan Sircar Medical College,Kolkata,West Bengal were taken for the study.The Humeral heads are measured in supero-inferior(SI) diameter, and antero-posterior diameter(AP), The width of Humeral head (Wdth),and angle of Humeral Torsion were measured. At the very beginning the both sided Humerus taken for the study are properly numbered using permanent marker pen.The width of the Humeral head(Wdth) is measured 1stly by pressing the head in modelling dough and when the mould is prepared,semisolid plaster of paris is lled into the mould. After drying the replica of humeral head is smoothened upto the mark of anatomical neck of humerus thus proper width can be measured. The superoinferior(SI) diameter, and antero-posterior diameter(AP) were measured by digital slide callipers by placing it directly onto the surface of consequently numbered humeral heads. The width of Humeral head (Wdth ) were measured from these replica(properly numbered) humeral heads, made of plaster of paris at the middle, the highest thickness was measured. The measurements are taken via spreading slide calipers in milimeters. For measuring the angle of humeral angle of torsion ,we xedly placed the humerus on to a area over the smooth part of the vertical wall which was meeting another horizontal wall at 90 degrees angle thus the line joining the two epicondyles of humerus lies parallel to the vertical wall.Now placing the straight edge of the protractor onto the upper end of humerus the angle of humeral torsion is measured. Results: Both sided Humerae were analysed separately for Morphological measurement, and angle of Humeral torsion.Mean values for SI were 41.31+3.46mm (Right side) and 40.91+3.27mm(Left side). Mean values for AP were 38.27+3.05mm (Right side) and 37.91+2.70mm(Left side). Conclusion: This study will contribute some relevant data and help the orthopaeditians in dealing with cases of shoulder pathology and shoulder arthroplasty cases.

A giant within Carpocorini (Hemiptera: Heteroptera: Pentatomidae): Description of emAdustonotus/em emgraziae/em sp. nov.

The Carpocorini are distributed worldwide, and it is one of the most speciose tribes within the Pentatomidae with 127 genera and more than 500 valid species. Recently, Adustonotus Bianchi was described to contain eight species formerly placed within Euschistus Dallas. Among them, Adustonotus grandis (Rolston) and Adustonotus latus (Dallas) are remarkable for their large size. Herein, the phylogenetic position of a new taxon is inferred by a total evidence analysis based on 85 morphological characters and four molecular markers. Adustonotus graziae sp. nov. is described, and is recovered in a polytomic lineage, including A. grandis and A. latus. These species share a solid combination of features that enable them to be separated from the other Adustonotus species (e.g., large size, the humeral angles spatulate and exceptionally produced, and the capsula seminalis shortened). Illustrations of external and internal genitalia, and a distributional map are provided.

The glenoid-intramedullary humeral angle: a measurement of compensatory scapular abduction in advanced rotator cuff arthropathy and its potential effects on implant choice.

BackgroundThis study establishes measurements to evaluate pathologic compensation in rotator cuff tear arthropathy and resultant considerations for reverse shoulder arthroplasty.MethodsRadiographs of patients with intact rotator cuffs were measured establishing interobserver and intraobserver reliability. Reverse shoulder arthroplasty cases performed by a single surgeon were then retrospectively reviewed. One year of follow-up radiographs were required for inclusion. Preoperative radiographs were analyzed for relative humeral head elevation ratio and humeral abduction relative to the glenoid face, termed the glenoid-intramedullary humeral angle. Statistical analyses assessed associations for radiographic measurements with presence and severity of scapular notching based on the Nerot-Sirveaux classification system.ResultsA total of 221 patients met inclusion criteria. At the 1-year follow-up, 61 (27.6%) shoulders had radiographic notching. There was a moderately strong (r = -0.56) negative correlation between glenoid-intramedullary humeral angle and humeral head elevation ratio. Patients with humeral head elevation ratio ≥ 20% were significantly (P = .024) and 9.2 times more likely to have notching of any grade. Patients with glenoid-intramedullary humeral angle ≤ 5 degrees were significant (P < .0001) and 6.7 times more likely to have notching of any grade and significantly (P = .00018) and 145 times more likely to have high-grade (3 and 4) notching.ConclusionsPreoperative humeral head elevation and compensatory scapular rotation with relative adduction of the humerus have significant associations with high-grade notching. These radiographic findings have potential to help surgeons in preoperative decision-making regarding implant choice and patient education.

Two remarkable new genera and species of cavernicolous ground beetles from Guizhou Province, southwestern China (Coleoptera: Carabidae: Trechinae)

Summary Two new genera and two new species of troglobitic trechine beetles are described and illustrated: Casaleaphaenops liyunchuni n. gen., n. sp. from the limestone cave Hei Dong in the suburb of Zunyi City, northern Guizhou Province, and Panaphaenops guixicus n. gen., n. sp. from the cave Zimu Dong in Panzhou, western Guizhou. Casaleaphaenops n. gen. is remarkably modified, with a very elongated body and thin appendages, but pronotum short and markedly convex; in particular, each humeral angle of elytra extraordinarily protruding upwardly as a sharp spine, a character only known in Italian trechine Italaphaenops species though smaller and thinner. Panaphaenops n. gen. is also an aphaenopsian, remaining unknown for its phylogenetical position in Trechini though it is somewhat related to Aspidaphaenops Uéno, 2006 and Tianeotrechus Tian & Tang, 2016.

Phylogeny of the stink bug tribe Chlorocorini (Heteroptera, Pentatomidae) based on DNA and morphological data: the evolution of key phenotypic traits

ABSTRACTPentatomidae is the third largest family of true bugs, comprising over 40 tribes. Few tribes have been studied in a phylogenetic context, and none of them have been examined using molecular data. Moreover, little is known about the evolution of key morphological characters widely used in taxonomic and phylogenetic studies at multiple levels. Here, we conduct a phylogenetic study of the tribe Chlorocorini (Pentatominae) combining 69 morphological characters and five DNA loci. We use the inferred phylogeny to reconstruct the evolution of key morphological characters such as the spined humeral angles of the pronotum, a dorsal projection on the apices of the femora and characters of male genitalia. We provide solid evidence that the tribe as currently recognized is not monophyletic based both on DNA and morphological data. The genera Arvelius Spinola and Eludocoris Thomas were consistently placed outside of the Chlorocorini, whereas the remaining genera were found to form a monophyletic group. We also show that nearly all morphological diagnostic characters for the tribe are homoplastic. The only exception is the development of the hypandrium, which contrary to expectations for genital traits, showed the slowest evolutionary rates. In contrast, the most rapidly evolving trait is the length of the ostiolar ruga, which may be attributed to selection favouring anti‐predatory behaviour and other functions of its associated scent glands. Lastly, we also provide a preliminary glimpse of the main phylogenetic relationships within the Pentatomidae, which indicates that most of the included subfamilies and tribes are not monophyletic. Our results suggest that the current subfamily‐level classification of Pentatomidae is not adequate to reflect its evolutionary history, and we urge for a more complete phylogeny of the family.

Range of motion following percutaneous fixation of pediatric supracondylar humerus fracture is independent of anterior osseous fragment resorption.

The objective of this study was to understand postoperative resorption of the anterior osseous fragment following closed reduction and percutaneous pinning (CRPP) of pediatric supracondylar humerus fractures and its effect on final range of motion (ROM). Eighty-six patients that underwent CRPP had sagittal and or axial plane deformities resulting in an anterior fragment. Humerocapitellar angle (HCA), anterior humeral line (AHL) and angle of rotation (AoR) were measured. A total of 11 (12.8%) patients failed to resorb the anterior fragment, 10 (90.9%) had satisfactory ROM. HCA initially was acceptable in 40 (46.5%) patients, and 37 (92.5%) demonstrated acceptable ROM. Final HCA was acceptable in 44 (51.2%) patients and 42 (95.4%) had acceptable final ROM. AHL was in the anterior third of the capitellum in 35 (40.6%) patients and 33 (94.3%) had acceptable ROM. Final AHL was in the anterior third of the capitellum in 43 (50.0%) patients and 41 (95.3%) had acceptable final ROM. No difference was found between acceptable ROM and HCA or AHL at either follow-up. Sixty-five and 21 patients had an AoR of 0° and between 23 and 36°, respectively. A total of 59 (90.7%) patients with an AoR of 0°, and 18 (85.7%) patients with an AoR of 23-36° displayed acceptable ROM. A total of 57 (87.7%) patients with an AoR of 0° and 18 (85.7%) with an AoR of 23-36° resorbed the anterior fragment. No association was found between rotational deformity and postoperative ROM or fragment resorption. Postoperative sagittal and axial plane alignment, HCA, AHL, AoR and resorption of the anterior osseous fragment does not correlate with final ROM.