Human Osteosarcoma MG-63 Cells Research Articles

Retraction Note: ROS-mediated cytotoxic activity of ZnO and CeO2 nanoparticles synthesized using the Rubia cordifolia L. leaf extract on MG-63 human osteosarcoma cell lines.

Retraction Note: ROS-mediated cytotoxic activity of ZnO and CeO2 nanoparticles synthesized using the Rubia cordifolia L. leaf extract on MG-63 human osteosarcoma cell lines.

FRESH 3D printing of zoledronic acid-loaded chitosan/alginate/hydroxyapatite composite thermosensitive hydrogel for promoting bone regeneration

The aim of this study was to develop a composite thermosensitive hydrogel for bone regeneration applications. This hydrogel consisted of chitosan, alginate and hydroxyapatite, and was loaded with zoledronic acid as a model drug. The feasibility of three-dimensional (3D) printing of the thermosensitive hydrogel using the extrusion technique was investigated. The 3D printing technique called Freeform Reversible Embedded Suspended Hydrogel (FRESH) printing was employed for this purpose. To characterize the composite hydrogels, several tests were conducted. The gelation time, rheological properties, and in vitro drug release were analyzed. Additionally, the cell viability test on human osteosarcoma MG-63 cells for the composite hydrogel was assessed using an MTT assay. The results of the study showed that the zoledronic acid-loaded composite thermosensitive hydrogel was successfully printed using the FRESH 3D printing technique which was not possible otherwise i.e., by using traditional 3D printing techniques. Further examination of the printed constructs using a Scanning Electron Microscope revealed the presence of porous and layered structures. The gelation times of the composite thermosensitive hydrogel was determined to be 10 and 20 min, respectively for scaffolds with and without HA, indicating the successful formation of the gel within a reasonable time to the FRESH technique. The flow behavior of the hydrogel was found to be pseudoplastic, following a non-Newtonian flow pattern with Farrow’s constant (N) values of 1.708 and 1.853 for scaffolds with and without hydroxyapatite, respectively. In terms of drug release, scaffolds prepared with and without hydroxyapatite reached nearly 100% of zoledronic acid release in 360 h and 48 h, respectively. The cell viability test on human osteosarcoma MG-63 cells using MTT assay has shown increased cell viability % in the case of the composite hydrogel, indicating a biocompatible scaffold. Overall, this study successfully developed a composite thermosensitive hydrogel loaded with zoledronic acid for bone regeneration applications and 3D printed using the FRESH 3D printing technique. The results of this study provide valuable insights into the potential use of this composite hydrogel for future biomedical applications.

Honokiol inhibits human osteosarcoma MG63 cell migration by upregulating FTO and Smad6 to promote autophagy

BackgroundOsteosarcoma (OS) is a common primary malignant tumor of bone, most commonly seen in children and adolescents, which has a low survival rate and is a serious threat to patients' lives. Honokiol (HKL) is the main active components of Magnolia officinalis, which have significant anti-tumor properties. The aim of this study was to observe the autophagic and migratory effects of HKL on MG63 cells and to investigate whether the mechanism of action was related to FTO and Smad6. MethodsFirstly, we cultured MG63 cells in vitro and intervened with different concentrations of HKL to detect cell activity by CCK8, apoptosis by flow cytometry, cell migration ability by scratch assay, cell invasion ability by transwell assay and MMP2, P62, LC3 I/II, FTO and Smad6 protein expression by Western blot. ResultsHKL inhibited MG63 cells activity and that this effect was dose and time dependent. Although there was no significant effect on apoptosis and invasive ability, HKL could act through effects such as promoting cell autophagy and inhibiting migration. HKL increased the protein expression levels of FTO, Smad6, MMP2, LC3 I/II and P62, and this effect was reduced after silencing of Smad6. ConclusionsHKL induced autophagy and inhibited cell migration in MG63 cells by increasing the expression of FTP and Smad6. It can be seen that HKL may be a promising drug for the treatment of OS.

Multifunctional zinc oxide loaded stearic acid surfaces on biodegradable magnesium WE43 alloy with hydrophobic, self-cleaning and biocompatible attributes

Biodegradable Mg alloys are one of the most promising materials for implant applications, for which the widespread use is hampered by rapid degradation in physiological environment. The present study explores the development of a novel zinc-oxide (ZnO) loaded stearic acid (SA) coating on medical grade WE43 alloy using a facile, and environment-friendly technique for promising biomaterial surface applications. Morphology and chemical analyses reveal the development of a layered coating surface with uniformly dispersed ZnO nanoparticles in SA matrix. The developed coating exhibits hydrophobic performance (contact angle of 135°) along with the retainment of hydrophobicity under varying chemical (acidic pH of 1 and basic pH of 13) and mechanical (post scratch testing and peel-off studies) conditions. The observed surface water repellency facilitates self-cleaning performance pointing towards its efficacy against potential biofilm formation. The developed coating demonstrates superior resistance against surface degradation during immersion studies in phosphate buffer saline solution (pH = 7.4) and better cell viability with MG-63 (human osteosarcoma) cell line. The approach presented here sets a platform for the development of efficient coatings on biodegradable WE43 alloys surfaces for potential biomaterial technologies.

IInduction of G2/M Phase Block and Apoptosis by Kaempferol in Human Sarcoma Cells

malignant cells has interested us to seek new strategies for the treatment of sarcoma. Flavonoids have been recently claimed to exert anti-cancer effects. We focused on the flavonoid kaempferol, to determine whether it induces apoptosis of sarcoma cells in vitro. Methods: We examined cell growth using a CCK-8 assay, morphology, cell cycle analysis, and the apoptosis or differentiation effects of kaempferol on cultured human osteosarcoma MG-63 cells. All experiments were performed at least three times in duplicates. The ANOVA and independent sample t-test were used for the comparison of the continuous variables Results: Kaempferol (50 μM), adversely affected the proliferation of MG-63 cells. Anti-proliferative action of kaempferol appeared to be linked to apoptotic cell death based on the morphological changes depicting nuclear fragmentation. Cell cycle analysis demonstrated the induction of G2/M phase arrest and an enhanced sub-G1 population. However, the intracellular alkaline phosphatase (ALP) activity was observed to have been stimulated. This apoptosis might be associated with cell differentiation of the cells in the early stage. Conclusions: This study demonstrates that kaempferol inhibited the growth of MG-63 cells in vitro. G2/M phase arrest and induction of intracellular ALP activities in the early phase are observed. These findings indicate that kaempferol may present as an additional pharmacological tool for the treatment of human sarcoma cells.

Suspension-Sprayed Calcium Phosphate Coatings with Antibacterial Properties.

Prosthesis loosening due to lack of osteointegration between an implant and surrounding bone tissue is one of the most common causes of implant failure. Further, bacterial contamination and biofilm formation onto implants represent a serious complication after surgery. The enhancement of osteointegration can be achieved by using bioconductive materials that promote biological responses in the body, stimulating bone growth and thus bonding to tissue. Through the incorporation of antibacterial substances in bioconductive, biodegradable calcium phosphate (CaP) coatings, faster osteointegration and bactericidal properties can be achieved. In this study, Cu-doped CaP supraparticles are spray-dried and suspension-sprayed CaP ceramic coatings with antibacterial properties are prepared using high-velocity suspension flame spraying (HVSFS). The objective was to increase the coatings' porosity and investigate which Cu-doped supraparticles have the strongest antibacterial properties when introduced into the coating layers. Biocompatibility was tested on human Osteosarcoma cells MG63. A porosity of at least 13% was achieved and the supraparticles could be implemented, enhancing it up to 16%. The results showed that the addition of Cu-doped supraparticles did not significantly reduce the number of viable cells compared to the Cu-free sample, demonstrating good biocompatibility. The antimicrobial activity was assessed against the bacterial strains Escherichia coli and Staphylococcus aureus, with Safe Airborne Antibacterial testing showing a significant reduction in both Gram-positive and Gram-negative strains on the Cu-doped coatings.

Effect of Spicatoside a on Anti-Osteosarcoma MG63 Cells through Reactive Oxygen Species Generation and the Inhibition of the PI3K-AKT-mTOR Pathway.

Osteosarcoma is a primary malignant tumor found in the bones of children and adolescents. Unfortunately, many patients do not respond well to treatment and succumb to the illness. Therefore, it is necessary to discover novel bioactive compounds to overcome therapeutic limitations. Liriope platyphylla Wang et Tang is a well-known herb used in oriental medicine. Studies have shown that metabolic diseases can be clinically treated using the roots of L. platyphylla. Recent studies have demonstrated the anticarcinoma potential of root extracts; however, the exact mechanism remains unclear. The aim of this study was to examine the anti-osteosarcoma activity of a single compound extracted from the dried roots of L. platyphylla. We purified Spicatoside A (SpiA) from the dried roots of L. platyphylla. SpiA significantly inhibited the proliferation of human osteosarcoma MG63 cells in a dose- and time-dependent manner. SpiA also regulated the expression of various downstream proteins that mediate apoptosis (PARP, Bcl-2, and Bax), cell growth (cyclin D1, Cdk4, and Cdk6), angiogenesis (VEGF), and metastasis (MMP13). The Proteome Profiler Human Phospho-Kinase Array Kit showed that the AKT signaling protein was a target of SpiA in osteosarcoma cells. We also found that SpiA suppressed the constitutive activation of the PI3K-AKT-mTOR-p70S6K1 signaling pathway. We further validated the effects of SpiA on the AKT signaling pathway. SpiA induced autophagosome formation and suppressed necroptosis (a form of programmed cell death). SpiA increased the generation of reactive oxygen species (ROS) and led to the loss of mitochondrial membrane potential. N-acetylcysteine (NAC)-induced inhibition of ROS generation reduced SpiA-induced AKT inhibition, apoptotic cell death, and anti-metastatic effects by suppressing cell migration and invasion. Overall, these results highlight the anti-osteosarcoma effect of SpiA by inhibiting the AKT signaling pathway through ROS generation, suggesting that SpiA may be a promising compound for the treatment of human osteosarcoma.

In vitro vascularization of 3D cell aggregates in microwells with integrated vascular beds

Most human tissues possess vascular networks supplying oxygen and nutrients. Engineering of functional tissue and organ models or equivalents often require the integration of artificial vascular networks. Several approaches, such as organs on chips and three-dimensional (3D) bioprinting, have been pursued to obtain vasculature and vascularized tissues in vitro. This technical feasibility study proposes a new approach for the in vitro vascularization of 3D microtissues. For this, we thermoform arrays of round-bottom microwells into thin non-porous and porous polymer films/membranes and culture vascular beds on them from which endothelial sprouting occurs in a Matrigel-based 3D extra cellular matrix. We present two possible culture configurations for the microwell-integrated vascular beds. In the first configuration, human umbilical vein endothelial cells (HUVECs) grow on and sprout from the inner wall of the non-porous microwells. In the second one, HUVECs grow on the outer surface of the porous microwells and sprout through the pores toward the inside. These approaches are extended to lymphatic endothelial cells. As a proof of concept, we demonstrate the in vitro vascularization of spheroids from human mesenchymal stem cells and MG-63 human osteosarcoma cells. Our results show the potential of this approach to provide the spheroids with an abundant outer vascular network and the indication of an inner vasculature.

Structural, mechanical and in vitro studies on pulsed laser deposition of hydroxyapatite on additive manufactured polyamide substrate

Additive manufacturing (AM) is an emerging field that merges engineering and life sciences to produce components that can effectively act as a replacement in the human body. This AM encompasses biofabrication using cells, biological or biomaterials as building blocks to fabricate biological and bio-application oriented substance, device and therapeutic products through a broad range of engineering and biological processes. Furthermore, bioactive coating on BAM surface facilitates biological fixation between the prosthesis and the hard tissue which increases the long term stability and integrity of the implant. In this paper, hydroxyapatite (HA) powder was coated over AM polyamide substrate using pulsed laser deposition. Coating morphology was characterised using scanning electron microscope (SEM) analysis and observed that the coating was dominated by the presence of particle droplet with different sizes. Compounds like tricalcium phosphate and a few amorphous calcium phosphates were found along with HA which was confirmed by X-ray diffraction (XRD) analysis. Fourier transform infrared spectroscopy (FTIR) techniques shows the presence of phosphate and carbonate groups in the HA structure. Nano-indentation and pull-out test reveals that the layer was strong enough and withstands higher load before it peels off. In vitro analysis was evaluated with human osteosarcoma MG-63 cells with respect to the cell viability and results shows that the good viability was observed on coated surface due to combinational effect of Ca2+ and PO4 3− ions. The multitude of characterisation conducted on the coating has established that coating polyamide with HA results in a positive combination for an implant.

Evaporation-induced self-assembly of hierarchical zinc silicate hybrid scaffolds for bone tissue engineering: Meso and macro scale porosity design

In this study, zinc silicate hybrid scaffolds with hierarchical meso/macroporous structures were synthesized using evaporation-induced self-assembly and sacrificial foamy templates. F127 triblock copolymer and polyurethane (PU) foam served as templates for mesoporosity and macroporosity, respectively. The scaffolds were calcined at 550, 650, and 750 °C for 2 h to remove the templates and form the crystalline phase. Analytical techniques, including BET, XRD, SEM, FTIR, and STA, were used to study the impact of calcination temperature on the scaffolds' meso-texture and crystalline phase. Results showed that increasing the calcination temperature to 750 °C significantly enhanced the overall crystallinity. The crystallized ZnO content increased from 10.3 wt% to 32 wt%, and the willemite (Zn2SiO4) crystalline phase formed. Willemite content was approximately 3 wt% at 650 °C and 67 wt% at 750 °C, as determined by quantitative XRD analyses via Rietveld refinement. The emergence of the willemite phase adversely impacted the specific surface area, leading to a reduction from 123.18 m2/g to 2.18 m2/g, and compromised meso-texture-related characteristics, indicating a substantial disruption in mesoporosity. The pure willemite sample was also obtained by increasing the calcination temperature up to 1000 °C. Although the sample contained no secondary phase, the specific surface area and total mesopore volume were drastically reduced, indicating the negative effect of high calcination temperature on mesoporosity. In contrast to the mesostructure, the macrostructure of the scaffolds exhibited negligible sensitivity to calcination temperature, maintaining a mean macropore diameter of around 200 μm. Furthermore, the in vitro performance of the scaffolds was evaluated by assessing apatite formation ability, degradability, and cytocompatibility. It was demonstrated that the scaffolds calcined at 750 °C exhibited superior performance in terms of apatite formation and cytocompatibility when cultivated with MG-63 human osteosarcoma cells.

Poly(styrene-co-methyl methacrylate)-silver/reduced graphene oxide-nano hydroxyapatite nanocomposites for bone cement applications

Herein, we report (polystyrene-co-polymethylmethacrylate/silver/reduced graphene oxide)-(nano-hydroxyapatite) ((PS-PMMA/Ag/RGO)-(nHA)) nanocomposites as potential bone cement. The polymer nanocomposites were characterized using Fourier Transform Infrared spectroscopy (FT-IR), X-ray diffraction (XRD), nano-indentation, thermal, and electron microscopic methods. The FT-IR and XRD results confirmed the successful formation of the nanocomposites. The elastic modulus (E) was found to be 6.85 GPa, and hardness (H) was 0.181 GPa for the nanocomposite bone cement samples, while the E and H values of commercial counterparts are 7.22 and 0.218 GPa, respectively. The thermogravimetric analysis (TGA) has revealed that the nanocomposite bone cement are stable up to 371 °C. The addition of nHA enhances the biocompatibility of bone cement. Cytotoxicity studies were conducted using human osteosarcoma MG63 cell lines. In-vitro studies showed that the material does not display any toxicity on the MG63 cell line, and increased concentration of nHA did not significantly impact the material’s toxicity, only impacting the curing kinetics of the cement.

Effect of TiO2 Nanotubes on Biological Activity of Osteoblasts and Focal Adhesion Kinase/Osteopontin Level

Osteoblasts are important cells for bone formation and play a major part in bone diseases and bone defects. Clinically, we usually adopt bone implants for related diseases. Also, nanotechnology is important in bones and joints. This study assessed the effects of TiO2 nanotubes of different diameters on osteoblast activity, FAK and OPN levels, aiming to provide an experimental foundation for selection of clinical bone implant materials. The morphology of MG-63 human osteosarcoma cells changed with expansion of TiO2 nanotubes’ diameter. From the biological activity, the cell proliferation and adhesion were enhanced as the diameter of the TiO2 nanotube was increased and its proliferation and adhesion were highest in the 100 nm TiO2 nanotube, which is related to increased ALP activity, FAK and OPN protein and mRNA expression. ELISA detected ALP activity and found that MG-63 cells cultured with 70 nm nanotube had strongest activity. Immune blotting and PCR results showed that, FAK and OPN activities were highest in 70 nm TiO2 nanotube cells. In summary, TiO2 nanotubes increased cell proliferation and adhesion by up-regulating the activities of FAK and OPN in a concentration-dependent relationship.

Isolation of 24-homoscalarane sesterterpenoids from a sponge of the genus Lendenfeldia

The chemical screening of an algae-containing marine sponge identified as Lendenfeldia species has isolated two 24-homoscalarane sesterterpenoids, including a known compound, felixin A (1) and a new analogue, lendenfeldarane V (2). The structure of 1, obtained in a previous study, was cited for the first time in this study via single-crystal X-ray diffraction analysis. The structure of 2 was ascertained via 2D NMR experiments and a literature review. The absolute configurations of 1 and 2 were delineated with DP4+ computation and specific optical rotation. Homoscalarane 1 exhibited cytotoxicity towards MG63 human osteosarcoma cells.

Laser texturing and oxidation of TiZrTa thin films to improve the biocompatible performance of titanium alloys

Titanium (Ti) and Ti alloys possess extensive applications in the medical field due to their non-toxic, biocompatible, and antibacterial properties. This study investigates the biocompatibility enhancement of a Ti-based alloy, Ti-6Al-4V, through a multi-step process involving cathodic arc ion plating of a TiZrTa thin film and subsequent laser-textured oxidation (LTO). LTO treatment produced a structured microtopography with regular groove patterns, including straight lines (L-s), circles (L-c), and checkboards (L-ch), resulting in surface oxidation and the formation of various oxides on the TiZrTa coating. Microstructure analyses revealed substantial alterations in surface topography induced by laser texturing. Antibacterial assessments against Staphylococcus aureus (S. aureus) showed that the films with LTO treatment did not exhibit significant advantages after 12 or 24 h of coculture because the laser-textured portions consisted of a combination of the film and the substrate, and the antibacterial effect was not obvious. Coatings with LTO treatment significantly improved L-929 mouse fibroblasts cell viability at 48 h, particularly for samples with a 50 μm spacing of straight and circular patterns (L-s and L-c). After two weeks of MG-63 human osteosarcoma cell culture, the viability of all samples reached similar levels. It suggested that the TiZrTa-coated Ti-6Al-4V exhibited good biocompatibility with both cells. This study contributed to the understanding of surface modification techniques for enhancing the biocompatibility of Ti-based alloys in biomedical applications.

Abstract 2878: Hyperthermia increases the efficacy of aminolevulinic acid-mediated photodynamic therapy in human osteosarcoma cells

Abstract Osteosarcoma is a malignant osteoid tumor that arises from mesenchymal cells exhibiting osteoblastic differentiation. Common treatments for this neoplasm include limb-salvage surgery and/or amputation of the affected limb, either of which can substantially decrease quality of life. Therefore, other, less invasive treatments should be explored. Photodynamic therapy (PDT) represents a more targeted, less invasive treatment possibility for osteosarcoma. Previous data from my laboratory demonstrated that aminolevulinic acid-mediated photodynamic therapy (ALA-PDT) can be used to induce significant cell death in human osteosarcoma MG-63 cells in vitro. However, delivering high doses of drugs to deep osteosarcoma tumors could prove difficult, so we aim to explore the use of combination therapies to increase the efficacy of ALA-PDT in human osteosarcoma cells. Previous studies have shown that hyperthermia (increased temperature) can induce cell death in cancer cells. Furthermore, data suggest that combining PDT with hyperthermia can induce cell death in cancer cells synergistically by activating differential death-inducing pathways. However, hyperthermia in combination with ALA-PDT has not been explored in human osteosarcoma. Therefore, we aim to investigate the possibility that hyperthermia in combination with ALA-PDT can increase cell death in human osteosarcoma cells compared to ALA-PDT alone. Data from our lab show that compared to normal body temperature (37°C), cell death in MG-63 human osteosarcoma cells was not significantly increased by mild hyperthermia alone (40°C and 43°C respectively), while moderate hyperthermic temperatures alone (46°C and 49°C) did significantly increase cell death. We also found that at moderately hyperthermic temperatures, ALA-PDT does not increase cell death any further compared to moderate hyperthermia alone. Furthermore, we found that at the mildly hyperthermic temperature of 40°C, cell death was not significantly increased any further by ALA-PDT compared to ALA-PDT alone. However, our data do show that at a temperature of 43°C, hyperthermia plus ALA-PDT increased cell death compared to ALA-PDT alone. Therefore, our data suggest that inducing mild hyperthermia could increase the efficacy of ALA-PDT in human osteosarcoma cells. Citation Format: Paige J. Baugher. Hyperthermia increases the efficacy of aminolevulinic acid-mediated photodynamic therapy in human osteosarcoma cells [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 2878.

Vitexicarpin Induces Apoptosis and Inhibits Metastatic Properties via the AKT-PRAS40 Pathway in Human Osteosarcoma.

Osteosarcoma, which has poor prognosis after metastasis, is the most common type of bone cancer in children and adolescents. Therefore, plant-derived bioactive compounds are being actively developed for cancer therapy. Artemisia apiacea Hance ex Walp. is a traditional medicinal plant native to Eastern Asia, including China, Japan, and Korea. Vitexicarpin (Vitex), derived from A. apiacea, has demonstrated analgesic, anti-inflammatory, antitumour, and immunoregulatory properties; however, there are no published studies on Vitex isolated from the aerial parts of A. apiacea. Thus, this study aimed to evaluate the antitumour activity of Vitex against human osteosarcoma cells. In the present study, Vitex (>99% purity) isolated from A. apiacea induced significant cell death in human osteosarcoma MG63 cells in a dose- and time-dependent manner; cell death was mediated by apoptosis, as evidenced by the appearance of cleaved-PARP, cleaved-caspase 3, anti-apoptotic proteins (Survivin and Bcl-2), pro-apoptotic proteins (Bax), and cell cycle-related proteins (Cyclin D1, Cdk4, and Cdk6). Additionally, a human phosphokinase array proteome profiler revealed that Vitex suppressed AKT-dependent downstream kinases. Further, Vitex reduced the phosphorylation of PRAS40, which is associated with autophagy and metastasis, induced autophagosome formation, and suppressed programmed cell death and necroptosis. Furthermore, Vitex induced antimetastatic activity by suppressing the migration and invasion of MMP13, which is the primary protease that degrades type I collagen for tumour-induced osteolysis in bone tissues and preferential metastasis sites. Taken together, our results suggest that Vitex is an attractive target for treating human osteosarcoma.

Vat photopolymerization 3D printing of yttria-stabilized ZrO2 ceramics: effects of a sintering additive (Na2O – 2SiO2), biocompatibility, and osteointegration

Effects of a liquid-phase sodium disilicate additive on the properties of ZrO2 ceramics containing 3 mol.% of Y2O3 and 2 wt% of Al2O3 are presented, including phase composition, microstructure, shrinkage, porosity, and bending strength. The distribution of elements along grain boundaries and the composition in a selected area of a lamella were investigated by transmission electron microscopy in pure and additive-containing samples. As a result of the introduction of the additive, sintering activity of the material increased, and the sintering temperature diminished down to 1150 °C. Thus, dense nanocrystalline materials with a crystallite size of 50–70 nm and a bending strength of up to 450 MPa were obtained. Optimized polymer-ceramic suspensions were used to produce objects with complex geometric shapes by 3D molding technology through layer-by-layer vat polymerization. According to in vitro assays, the obtained samples are nontoxic and cytocompatible with human osteosarcoma MG-63 cells, and according to in vivo experiments, are biocompatible and showing osseointegrative properties when implanted into the rat tibia.

Osteogenic assessment of leukocyte platelet-rich fibrin and injectable platelet-rich fibrin in the human osteosarcoma MG - 63 cell line in chronic periodontitis patients: An in vitro study.

The burgeoning interest in implant and regenerative dental care has led to a notable upsurge in the utilization of regenerative modalities. The intent of the present investigation was to evaluate the osteogenic ability of two different concentrated platelet groups at various concentrations in the human osteosarcoma MG-63 cell line. Blood samples from 21 volunteers with chronic periodontitis were collected which were then centrifuged in accordance with the protocols of Choukroun et al. and Miron et al. to produce leukocyte- and platelet-rich fibrin (L-PRF) and injectable platelet-rich fibrin (I-PRF), respectively. Following MG-63 cell culture, the osteogenic ability of 0, 4%, and 20% concentrations of both L-PRF and I-PRF were determined using the real-time polymerase chain reaction assay. The results showed that 20% I-PRF (1.52 ± 0.24) and 4% L-PRF (1.42 ± 0.37) had the highest amount of bone morphogenetic protein 2 and osteocalcin, respectively. I-PRF appears to promote the initial differentiation of cells.

Bio-functionalized carbon dots for signaling immuno-reaction of carcinoembryonic antigen in an electrochemical biosensor for cancer biomarker detection

Early diagnosis of cancer demands sensitive and accurate detection of cancer biomarkers in blood. Carbon dots (CDs) bio-functionalization with antibodies, peptides or aptamers have played significant role in cancer diagnosis and targeted cancer therapy. Herein, a biosensor for detection of cancer biomarker carcinoembryonic antigen (CEA) in blood serum has been designed using CDs bio-functionalized with HRP-conjugated CEA antibody (CUCDs@CEAAb2) as detection probe. CDs were synthesized by upscaling of cow urine, a nitrogen rich biomass waste, by hydrothermal method. Detection probe based on CDs resulted in 3.5 times higher sensitivity as compared to conventional electrochemical sandwich immunoassay. To further improve the sensor performance, hyper-branched polyethylenimine grafted poly amino aniline (PEI-g-PAANI) was used as the sensing interface, which enabled immobilization of higher amount of capture antibody. Detection of CEA in human blood serum coupled with wide linear range (0.5–50 ng/ml), good specificity, stability, reproducibility and low detection limit (10 pg/ml) signified the excellence of CUCDs based CEA immunosensor. CUCDs exhibited excitation wavelength dependent fluorescence property and showed strong blue emission under UV irradiation. MTT assay indicated that the material is not toxic towards human dental pulp stem cells (hDPSCs) and MG63 osteosarcoma cells (cell viability > 90%). The present study demonstrates a methodology for valorization of animal waste to a cost-effective carbon based functional nanomaterial for clinical detection of cancer biomarkers.

Direction-oriented fiber guiding with a tunable tri-layer-3D scaffold for periodontal regeneration.

Multilayered scaffolds mimicking mechanical and biological host tissue architectures are the current prerequisites for successful tissue regeneration. We propose our tunable tri-layered scaffold, designed to represent the native periodontium for potential regenerative applications. The fused deposition modeling platform is used to fabricate the novel movable three-layered polylactic acid scaffold mimicking in vivo cementum, periodontal ligament, and alveolar bone layers. The scaffold is further provided with multiple angulated fibers, offering directional guidance and facilitating the anchorage dependence on cell adhesion. Additionally, surface modifications of the scaffold were made by incorporating coatings like collagen and different concentrations of gelatin methacryloyl to enrich the cell adhesion and proliferation. The surface characterization of our designed scaffolds was performed using tribological studies, atomic force microscopy, contact angle measurement, scanning electron microscopy, and micro-computed tomography. Furthermore, the material characterization of this scaffold was investigated by attenuated total reflectance-Fourier transformed infrared spectroscopy. The scaffold's mechanical characterization, such as strength and compression modulus, was demonstrated by compression testing. The L929 mouse fibroblast cells and MG63 human osteosarcoma cells have been cultured on the scaffold. The scaffold's superior biocompatibility was evaluated using fluorescence dye with fluorescence microscopy, scanning electron microscopy, in vitro wound healing assay, MTT assay, and flow cytometry. The mineralization capability of the scaffolds was also studied. In conclusion, our study demonstrated the construction of a multilayered movable scaffold, which is highly biocompatible and most suitable for various downstream applications such as periodontium and in situ tissue regeneration of complex, multilayered tissues.