HPLC Analysis Research Articles

Search for new steroidal glycosides with anti-cancer potential from natural resources.

Chemical investigations of higher plants, with particular attention paid to their steroidal glycosides, present a promising approach for generating anti-cancer agents from natural products. We conducted a systematic phytochemical investigation of nine higher plants-whole plants and rhizomes of Convallaria majalis, whole plants of Agave utahensis, roots of Adonis amurensis, seeds of Adonis aestivalis, bulbs of Bessera elegans, bulbs of Fritillaria meleagris, seeds of Digitalis purpurea, underground parts of Yucca glauca, and bulbs of Lilium pumilum-which led to the discovery of novel steroidal glycosides. The structures of these new constituents were determined based on spectroscopic data and chemical transformations. The identification of the monosaccharides including their absolute configurations was carried out by direct HPLC analysis of their hydrolysates using an optical rotation detector. Cytotoxicity of the isolated steroidal glycosides was evaluated against various tumor cells (A549, ACHN, HepG-2, HL-60, HSC-2, HSC-3, HSC-4, HSG, and SBC-3) and normal cells (Fa2 N-4, HK-2, and TIG-3 cells). Certain steroidal glycosides exhibit selective cytotoxicity and synergistic effects, making them potential lead compounds for use as anti-cancer agents. We document the isolation of 139 steroidal glycosides from higher plants and assessment their cytotoxic activities.

Sustainable and Stability Indicating Liquid Chromatography–Mass Spectrometry Method for the Quantitation of Delafloxacin in Pharmaceutical Formulations

ABSTRACTA sensitive, precise, accurate, and green analytical HPLC–ESI–MS method for the quantification of delafloxacin and its degradation products in pharmaceutical dosage forms has been optimized and validated. The best separation was achieved with isocratic elution, the mobile phase is composed of a mixture of 0.1% trifluoroacetic acid in water and acetonitrile 65:35 (v/v), the flow rate is 0.5 mL min−1, and the column used is Kinetex Core‐Shell C18 (250 × 4.6 mm, 5 µm). Forced degradation studies were performed to prove that the method indicates stability. The pharmaceutical substance is prone to oxidative (H2O2 3%), acidic (HCl 0.1 M), and basic (0.1 M) conditions. Delafloxacin proved to be susceptible to acidic (HCl 0.1 M), basic (0.1 M), and oxidative (H2O2 3%) conditions. The proposition of the structures of degradation products has been based on the MS spectrum and the known reactivity of delafloxacin in the oxidative medium. The validation of the analytical method was carried out following the International Conference on Harmonization guidelines. The method was validated in terms of specificity, precision, linearity, and accuracy. The limits of detection and quantification of delafloxacin are, respectively, 0.005 and 0.017 µg mL−1.

In Vitro Biological Evaluation of an Alginate-Based Hydrogel Loaded with Rifampicin for Wound Care

We report a biocompatible hydrogel dressing based on sodium alginate-grafted poly(N-vinylcaprolactam) prepared by encapsulation of Rifampicin as an antimicrobial drug and stabilizing the matrix through the repeated freeze–thawing method. The hydrogel structure and polymer-drug compatibility were confirmed by FTIR, and a series of hydrogen-bond-based interactions between alginate and Rifampicin were identified. A concentration of 0.69% Rifampicin was found in the polymeric matrix using HPLC analysis and spectrophotometric UV–Vis methods. The hydrogel’s morphology was evaluated by scanning electron microscopy, and various sizes and shapes of pores, ranging from almost spherical geometries to irregular ones, with a smooth surface of the pore walls and high interconnectivity in the presence of the drug, were identified. The hydrogels are bioadhesive, and the adhesion strength increased after Rifampicin was encapsulated into the polymeric matrix, which suggests that these compositions are suitable for wound dressings. Antimicrobial activity against S. aureus and MRSA, with an increased effect in the presence of the drug, was also found in the newly prepared hydrogels. In vitro biological evaluation demonstrated the cytocompatibility of the hydrogels and their ability to stimulate cell multiplication and mutual cell communication. The in vitro scratch assay demonstrated the drug-loaded alginate-grafted poly(N-vinylcaprolactam) hydrogel’s ability to stimulate cell migration and wound closure. All of these results suggest that the prepared hydrogels can be used as antimicrobial materials for wound healing and care applications.

Complex Formation and Hydrolytic Processes of Protected Peptides Containing the -SXH- Motif in the Presence of Nickel(II) Ion.

Interactions between metal ions and proteins are considered reversible, such as the coordination of a metal ion to a protein or enzyme, but irreversible processes like the oxidative reactions, aggregation or hydrolytic processes may occur. In the presence of Ni(II)-ions selective hydrolysis of the peptides containing the -SXH- or -TXH- motif was observed. Since the side chain of histidine serves as the metal ion binding site for many native proteins, and very often histidine is present in a -SXH- or -TXH- sequence, to study the complex formation and hydrolytic processes in presence of nickel(II) ion four peptides were synthesised: Ac-SKHM-NH2, A3SSH-NH2, A4SSH-NH2, AAAeKSH-NH2. The Ni(II)-induced hydrolysis of Ac-SKHM-NH2 peptide occurs rapidly in alkaline medium already at room temperature. In two peptides containing -SSH- sequence on the C-termini, the N-terminal part is the major binding site for the nickel(II) ion, but the formation of dinuclear complexes was also observed. In the [Ni2LH-6]2- complex of hexapeptide, the coordination sphere of the metal ions is saturated with deprotonated Ser-O-, which does not result in hydrolysis of the peptide. For A4SSH-NH2, both Ni(II) ions fulfill the conditions for hydrolysis, which was confirmed by HPLC analyses at pH ~ 8.2 and25 °C.

Pharmacokinetics and Histotoxic Profile of a Novel Azithromycin-Loaded Lipid-Based Nanoformulation.

Azithromycin traditional formulations possesses poor oral bioavailability which necessitates development of new formulation with enhanced bioavailability of the drug. The objective of current research was to explore the kinetics and safety profile of the newly developed azithromycin lipid-based nanoformulation (AZM-NF). In the in-vitro study of kinetics profiling, azithromycin (AZM) release was assessed using dialysis membrane enclosing equal quantity of either AZM-NF, oral suspension of azithromycin commercial product (AZM-CP), or azithromycin pure drug (AZM-PD) in simulated intestinal fluid. The ex-vivo study was performed using rabbit intestinal segments in physiological salts solution in a tissue bath. The in-vivo study was investigated by oral administration of AZM to rabbits while taking blood samples at predetermined time-intervals, followed by HPLC analysis. The toxicity study was conducted in rats to observe histopathological changes in rat's internal organs. In the in-vitro study, maximum release was 95.38 ± 4.58% for AZM-NF, 72.79 ± 8.85% for AZM-CP, and 46.13 ± 8.19% for AZM-PD (p < 0.0001). The ex-vivo investigation revealed maximum permeation of 85.68 ± 5.87 for AZM-NF and 64.88 ± 5.87% for AZM-CP (p < 0.001). The in-vivo kinetics showed Cmax 0.738 ± 0.038, and 0.599 ± 0.082µg/ml with Tmax of 4 and 2h for AZM-NF and AZM-CP respectively (p < 0.01). Histopathological examination revealed compromised myocardial fibers integrity by AZM-CP only, liver and kidney showed mild aberrations by both formulations, with no remarkable changes in the rest of studied organs. The results showed that AZM-NF exhibited significantly enhanced bioavailability with comparative safer profile to AZM-CP investigated.

Pharmacokinetics and Histotoxic Profile of a Novel Azithromycin-Loaded Lipid-Based Nanoformulation.

Azithromycin traditional formulations possesses poor oral bioavailability which necessitates development of new formulation with enhanced bioavailability of the drug. The objective of current research was to explore the kinetics and safety profile of the newly developed azithromycin lipid-based nanoformulation (AZM-NF). In the in-vitro study of kinetics profiling, azithromycin (AZM) release was assessed using dialysis membrane enclosing equal quantity of either AZM-NF, oral suspension of azithromycin commercial product (AZM-CP), or azithromycin pure drug (AZM-PD) in simulated intestinal fluid. The ex-vivo study was performed using rabbit intestinal segments in physiological salts solution in a tissue bath. The in-vivo study was investigated by oral administration of AZM to rabbits while taking blood samples at predetermined time-intervals, followed by HPLC analysis. The toxicity study was conducted in rats to observe histopathological changes in rat's internal organs. In the in-vitro study, maximum release was 95.38 ± 4.58% for AZM-NF, 72.79 ± 8.85% for AZM-CP, and 46.13 ± 8.19% for AZM-PD (p < 0.0001). The ex-vivo investigation revealed maximum permeation of 85.68 ± 5.87 for AZM-NF and 64.88 ± 5.87% for AZM-CP (p < 0.001). The in-vivo kinetics showed Cmax 0.738 ± 0.038, and 0.599 ± 0.082µg/ml with Tmax of 4 and 2h for AZM-NF and AZM-CP respectively (p < 0.01). Histopathological examination revealed compromised myocardial fibers integrity by AZM-CP only, liver and kidney showed mild aberrations by both formulations, with no remarkable changes in the rest of studied organs. The results showed that AZM-NF exhibited significantly enhanced bioavailability with comparative safer profile to AZM-CP investigated.

Screening of inhibitors on successful covalent tyrosinase coupling with help from SpyBank.

Microbial metabolites are an important source of tyrosinase (TYR) inhibitors because of their rich chemical diversity. However, because of the complex metabolic environment of microbial products, it is difficult to rapidly locate and identify natural TYR inhibitors. Affinity-based ligand screening is an important method for capturing active ingredients in complex samples, but ligand immobilization is an important factor affecting the screening process. In this paper, TYR was used as ligand, and the SpyTag/SpyCatcher coupling system was used to rapidly construct affinity chromatography vectors for screening TYR inhibitors and separating active components from complex samples. We successfully expressed SpyTag-TYR fusion protein and SpyCatcher protein, and incubated SpyCatcher protein with epoxy-activated agarose. The SpyTag-TYR protein was spontaneously coupled with SpyCatcher to obtain an affinity chromatography filler for immobilization of TYR, and the performance of the packaging material was characterized. Finally, compound 1 with enzyme inhibitory activity was successfully obtained from the fermentation product of marine microorganism C. Through HPLC, MS, 1H NMR and 13C NMR analyses, its structure was deduced as azelaic acid, and its activity was analyzed. The results showed that this is a feasible method for screening TYR inhibitors in complex systems.

Development and validation of analytical HPLC for phenolics in Pinus densiflora bark extract

Development and validation of analytical HPLC for phenolics in Pinus densiflora bark extract

Development and validation of analytical HPLC for phenolics in Pinus densiflora bark extract

Development and validation of analytical HPLC for phenolics in Pinus densiflora bark extract

Rapid Screening of Chemical Components in Salvia miltiorrhiza with the Potential to Inhibit Skin Inflammation.

Hyaluronidase possesses the capacity to degrade high-molecular-weight hyaluronic acid into smaller fragments, subsequently initiating a cascade of inflammatory responses and activating dendritic cells. In cases of bacterial infections, substantial quantities of HAase are generated, potentially leading to severe conditions such as cellulitis. Inhibiting hyaluronidase activity may offer anti-inflammatory benefits. Salvia miltiorrhiza Bunge, a traditional Chinese medicine, has anti-inflammatory properties. However, its effects on skin inflammation are not well understood. This study screened and evaluated the active components of S. miltiorrhiza that inhibit skin inflammation, using ligand fishing, enzyme activity assays, drug combination analysis, and molecular docking. By combining magnetic nanomaterials with hyaluronidase functional groups, we immobilized hyaluronidase on magnetic nanomaterials for the first time in the literature. We then utilized an immobilized enzyme to specifically adsorb the ligand; two ligands were identified as salvianolic acid B and rosmarinic acid by HPLC analysis after desorption of the dangling ligands, to complete the rapid screening of potential anti-inflammatory active ingredients in S. miltiorrhiza roots. The median-effect equation and combination index results indicated that their synergistic inhibition of hyaluronidase at a fixed 3:2 ratio was enhanced with increasing concentrations. Kinetic studies revealed that they acted as mixed-type inhibitors of hyaluronidase. Salvianolic acid B had Ki and Kis values of 0.22 and 0.96 μM, respectively, while rosmarinic acid had values of 0.54 and 4.60 μM. Molecular docking revealed that salvianolic acid B had a higher affinity for hyaluronidase than rosmarinic acid. In addition, we observed that a 3:2 combination of SAB and RA significantly decreased the secretion of TNF-α, IL-1, and IL-6 inflammatory cytokines in UVB-irradiated HaCaT cells. These findings identify salvianolic acid B and rosmarinic acid as key components with the potential to inhibit skin inflammation, as found in S. miltiorrhiza. This research is significant for developing skin inflammation treatments. It demonstrates the effectiveness and broad applicability of the magnetic nanoparticle-based ligand fishing approach for screening enzyme inhibitors derived from herbal extracts.

In-vitro and in-vivo investigation of wound healing efficacy of Syzygium cumini leaf extracts loaded carboxymethylcellulose film

The study focused on Syzygium cumini Leaf Extract (SCLE) loaded into Carboxymethylcellulose (CMC) film via Solution casting. Phytochemical screening revealed carbohydrates, and HPLC analysis identified quercetin, known for promoting wound healing. FT-IR spectroscopy confirmed various functional groups. X-Ray diffraction (XRD) determined the crystallite size to be 14.58 nm. Field Emission Scanning Electron Microscopy (FESEM) showed the dispersion of extracts, and Energy Dispersive X-ray (EDX) analysis detailed the weight percentages of components. Antibacterial activity tests revealed zones of inhibition for S. aureus (15 mm) and E. coli (11 mm). The film exhibited 63.11 % antioxidant activity at 517 nm with DPPH at a 750 μl sample concentration. Drug release kinetics were also studied. In-vitro wound healing using the L929 cell line showed 83 % healing at a 100 μl concentration. Over 14 days, the treatment group's wounds healed completely within 7 days, unlike the control groups which showed no recovery after 14 days. These findings indicate that the SCLE-CMC film is highly effective in promoting wound healing.

Phytochemical-mediated regulation of aflatoxigenic fungi contamination in a shifting climate and environment.

Mycotoxin contamination poses a significant problem in developing countries, particularly in northern Pakistan's fluctuating climate. This study aimed to assess aflatoxin contamination in medicinal and condiment plants in Upper Dir (dry-temperate) and Upper Swat (moist-temperate) districts. Plant samples were collected and screened for mycotoxins (Aflatoxin-B1 and Aflatoxin-B-2). Results showed high levels of AFB-1 (11,505.42 ± 188.82) as compared to AFB-2 (846 ± 241.56). The maximum contamination of AFB-1 in Coriandrum sativum (1154.5 ± 13.43ng to 3328 ± 9.9ng) followed by F. vulgare (883 ± 9.89ng to 2483 ± 8.4ng), T. ammi (815 ± 11.31ng to 2316 ± 7.1ng), and C. longa (935.5 ± 2.12ng to 2009 ± 4.2ng) while the minimum was reported in C. cyminum (671 ± 9.91ng to 1995 ± 5.7ng). Antifungal tests indicated potential resistance in certain plant species (C. cyminum) while A. flavus as the most toxins contributing species due to high resistance below 80% (54.2 ± 0.55 to 79.5 ± 2.02). HPLC analysis revealed hydroxyl benzoic acid (5136 amu) as the dominant average phytochemical followed by phloroglucinol (4144.31 amu) with individual contribution of 8542.08 amu and 12,181.5 amu from C. cyaminum. The comparison of average phytochemicals revealed the maximum concentration in C. cyminum (2885.95) followed by C. longa (1892.73). The findings revealed a statistically significant and robust negative correlation (y = - 2.7239 × + 5141.9; r = - 0.8136; p < 0.05) between average mycotoxins and phytochemical concentrations. Temperature positively correlated with aflatoxin levels (p < 0.01), while humidity had a weaker correlation. Elevation showed a negative correlation (p < 0.05), while geographical factors (latitude and longitude) had mixed correlations (p < 0.05). Specific regions exhibited increasing aflatoxin trends due to climatic and geographic factors.

Novel tributyl phosphate-based deep eutectic solvent: Application in microwave assisted extraction of carotenoids

A contribution to the use of deep eutectic solvents (DES) and microwave-assisted extraction (MAE) was made for bioactive compounds recovery, especially those with lipophilic character, from tomato and carrot samples rich in carotenoids. For the first time, a novel deep eutectic solvent was synthesized, comprising tributyl phosphate (TBP) as a hydrogen bond acceptor and acetic acid (AcOH) as a hydrogen bond donor. The total antioxidant capacity (TAC) of tomato and carrot extracts obtained by MAE, in which optimization of operational parameters and modeling were made with the use of Box-Behnken design of the response surface methodology (RSM), was evaluated using the Cupric Reducing Antioxidant Capacity (CUPRAC) method. For the highest TAC, operational parameters that best suit the MAE procedure were set at 80 °C, 35 min, and 25 mL/2.0 g. The TAC values of extracts obtained by MAE using TBP:AcOH, 1:2 (mol/mol) were examined against those of extracts acquired by classical solvent extraction using a mixture of hexane, ethanol and acetone (H:E:A, 2:1:1 (v/v/v)) mixture. TAC of extracts in DES varied between 5.10 and 0.71 lycopene equivalents (mmol LYC kg−1). The highest extraction yield comparable to conventional organic solvents was obtained with TBP:AcOH (1:2). It was observed that, in addition to lipophilic antioxidants, some hydrophilic antioxidant compounds were partially extracted with the proposed DES. Moreover, the extracted antioxidant compounds were identified and quantified by HPLC analysis. The proposed DES and MAE process will find potential application for hydrophobic antioxidant extraction from tomatoes and carrots on an industrial scale after further studies.

Sensitive determination of quercetin in food samples implementing magnetic dispersive solid phase extraction coupled with ion mobility spectrometry

Quercetin (QUR) is a vital flavonoid, which is found in dietary human. The quick analysis of QUR is difficult on account of utilizing complicated methods. Hence, we developed a proposed method based on ion mobility spectrometry (IMS) to evaluate the fast analysis of QUR in food samples. This analytical method combined the benefit of polypyrrole-coated magnetic dispersive solid phase extraction (MDSPE) as a sorbent phase for the QUR extraction, and also the strength of IMS for the rapid detection. Nanoparticle (NP) characterization was investigated through VSM, FT-IR, XRD, BET, and as well as FE-SEM analysis. Sample pH, amount of nanoparticles, type and volume of desorption solvent, extraction time, and desorption time as impressive parameters in MDSPE method were investigated and optimized. The calibration curve was linear in the range of 1.0–90.0 ng mL−1, with a determination coefficient (R2) of 0.9954. The limit of detection (LOD) and the limit of quantification (LOQ) for QUR were 0.31 and 1.02 ng mL−1, respectively. The RSD% of QUR through seven parallel analyses was 4.44. This analytical work was executed to quantify QUR in honey and tea samples without any derivation procedure needed. The recovery values for QUR were estimated in the range of 92.5–96.7 % using the proposed method. Also, according to the attained results from HPLC analyses, the applicability, and susceptibility of the current method was verified.

Sensitive Determination of Quercetin in food Samples implementing Magnetic Dispersive Solid Phase Extraction coupled with Ion Mobility Spectrometry

Quercetin (QUR) is a vital flavonoid, which is found in dietary human. The quick analysis of QUR is difficult on account of utilizing complicated methods. Hence, we developed a proposed method based on ion mobility spectrometry (IMS) to evaluate the fast analysis of QUR in food samples. This analytical method combined the benefit of polypyrrole-coated magnetic dispersive solid phase extraction (MDSPE) as a sorbent phase for the QUR extraction, and also the strength of IMS for the rapid detection. Nanoparticle (NP) characterization was investigated through VSM, FT-IR, XRD, BET, and as well as FE-SEM analysis. Sample pH, amount of nanoparticles, type and volume of desorption solvent, extraction time, and desorption time as impressive parameters in MDSPE method were investigated and optimized. The calibration curve was linear in the range of 1.0-90.0ngmL-1, with a determination coefficient (R2) of 0.9954. The limit of detection (LOD) and the limit of quantification (LOQ) for QUR were 0.31 and 1.02ngmL-1, respectively. The RSD% of QUR through seven parallel analyses was 4.44. This analytical work was executed to quantify QUR in honey and tea samples without any derivation procedure needed. The recovery values for QUR were estimated in the range of 92.5% to 96.7% using the proposed method. Also, according to the attained results from HPLC analyses, the applicability, and susceptibility of the current method was verified.

Semi-quantitative analysis on sea buckthorn phenolic-rich extract coating bone-like open porous NiTi-based alloy

This study investigates the feasibility of coating Ni–Ti alloy with sea buckthorn extract via a hydrothermal method for targeted delivery of beneficial phenolic compounds to bone tissue. The qualitative analysis confirmed the presence of flavonoids and tannins in sea buckthorn extract, supporting its osteogenic potential. The microhardness of the NiTi alloy substrate was suitable for biomedical applications, and successful coating was achieved without compromising its properties. NiTi alloy samples were coated with 18.1, 20.1, and 12.4 mg of extract, respectively. Comprehensive evaluations confirmed the successful integration of the extract onto the alloy's surface. The coated system exhibited sustained release properties over five days, with the highest release occurring on the first day (on average 32.1 % for the first peak and 72.1 % for the second peak), as determined by HPLC analysis. The findings demonstrate the potential of this novel approach in developing dual-functionality implants for bone health promotion. Overall, this study underscores the promising potential of Ni–Ti alloy coated with sea buckthorn extract as a targeted drug delivery system for bone tissue.

A comprehensive study of Tianma Toutong Tablets from the dual dimensions of quality and efficacy using fingerprint techniques and network pharmacology

BackgroundThe quality of traditional Chinese medicine (TCM) is the prerequisite for ensuring its safe and effective clinical application. With the increasing popularity of TCM worldwide, the quality control of TCM products has become increasingly crucial. Tianma toutong tablet (TMTTT) is mainly used for migraine caused by external wind and cold, blood stasis, or deficiency of blood and nourishment. However, the mechanism of action of TMTTT is still unclear, and there has been a lack of in vitro antioxidant activity research and migraine treatment mechanism research. Therefore, it is urgent to establish a set of comprehensive and effective evaluation methods. Resultsthree fingerprint profiles were established using HPLC, UV, and DSC analysis methods, and established three digital parameters simple complexity index (SX), simple clarity index (SY), simple complexity clarity ratio (Sω), 22 batches of samples were evaluated using a comprehensive linear quantitative fingerprint method (CLQFM). In addition, the antioxidant activity of the samples was determined using the DPPH method, and the relationship between fingerprint peaks in different fingerprints and antioxidant capacity was explored using Pearson correlation coefficients. Finally, network pharmacological research was conducted to investigate the potential targets, compounds, and pathways involved in the treatment of migraines with TMTTT. The results showed that the 22 batches of samples were classified into different quality grades. TMTTT exhibited good antioxidant activity, the fingerprint-efficacy relationship showed that gastrodin, chlorogenic acid, ferulic acid, imperatorin and isoimperatorin had strong antioxidant capacity, providing directions for the identification of active compounds. A total of 36 core targets were identified and screened by network pharmacology, which AKT serine/threonine kinase 1 (AKT1), albumin (ALB), insulin (INS), tumor necrosis factor (TNF), prostaglandin-endoperoxide synthase 2 (PTGS2) and interleukin-6 (IL-6), and compounds such as β-sitosterol, chrysophanol, vanillin are the key to the treatment of migraine, providing references for subsequent clinical research and new drug development. Significance: This study examined the consistency of the quality of TMTTT and the mechanism of action in treating migraines from both quality and efficacy perspectives, providing a favorable direction for further research on TMTTT and offering new ideas for the quality control of TCM compound formulations.

Chemical Composition, Antifungal, Antibacterial, Antioxidant, Antiviral and Cytotoxic Activities of Ruta chalepensis L. Fixed Oil from Saudi Arabia

An aromatic plant is called Ruta chalepensis L. known locally as “Fidjel,” grows in rocky, arid places. Its pharmacological activities are pleiotropic. The goal of the present investigation was to use GCMS and HPLC analysis to identify the chemical constituents of oil extracted from Ruta chalepensis L. and assess its antibacterial, antifungal, antioxidant, antiviral, and anticancer properties. Linoleic acid was the most predominant acid found in Ruta chalepensis L. oil, then oleic acid, palmitic acid, and linolenic acid. 13.64 μg/mL of tocopherol (α-, β-, and γ-tocopherol) was identified. The primary phytosterols are β-sitosterol and campesterol. At 200 μL/mL of Ruta chalepensis L. oil, phenolic components rated 84.4 GAE/mL and had 94.0% antioxidant activity. Zone inhibition efficacy of Ruta chalepensis L. oil against microbial strains, particularly E. coli with a diameter of 42.3 mm, was demonstrated. MBC (30 μL/mL and 40 μL/mL) are the bactericidal action against E. coli and S. aureus, while MIC bacteriostatic (30 μL/mL) was also demonstrated. However, Ruta chalepensis L. oil was ineffective against Saccharomyces cervisia and fungal strains. Weak inhibitory impact of Ruta chalepensis L. oil was observed against the PC-3 (prostate cancer) cell line. Nonetheless, it had a significant inhibitory impact on the A2780 (ovarian cancer) cell line. At 100 μg/mL of oil, Ruta chalepensis L. oil showed a low antiviral impact (7.93±2.03%) against the herpes simplex virus type 2 (HSV-2). Oil from Ruta chalepensis L. is a promising option for the medical management of non- transmissible illnesses, since it is wealthy in antioxidants and bioactive substances.

Efficient electrochemical advanced degradation of Red CL and Red WB dyes from the tanning industry using a boron-doped diamond anode

Electrochemical oxidation (EO), electro-Fenton (EF), and photoelectro-Fenton (PEF) with a BDD anode have been comparatively assessed to remediate solutions of Red CL and/or Red WB azo dyes from real raw water. For the EO process in 50 mM Na2SO4 at pH 3.0, the main oxidant was the heterogeneous •OH generated at the anode, whereas in EF and PEF, the cathodic production of H2O2 and the addition of 0.50 mM Fe2+ catalyst additionally originated homogeneous •OH that enhanced the oxidation of organics. In PEF, the solution was illuminated with a 6 W UVA light. An almost total discoloration was always found operating with a 1:1 mixture of 200 mg L-1 of both dyes in 60 min, whose efficiency increased in the order of EO < EF < PEF. The HPLC analysis of the dye mixture treated by PEF disclosed that its degradation process agreed with its discoloration. A high 74% of COD was reduced due to the oxidative action of hydroxyl radicals and the photolysis of final Fe(III)-carboxylate species with UVA irradiation. The process was accompanied by an energy consumption of 0.76 kWh (g COD)-1, a value similar to the energy consumed by the applied UVA light.

Phytochemicals-based investigation of Rubia cordifolia pharmacological potential against letrozole-induced polycystic ovarian syndrome in female adult rats: In vitro, in vivo and mechanistic approach

Polycystic Ovarian Syndrome (PCOS) is a metabolic, reproductive, and endocrine disorder affecting women of fertile age. This study aimed to formulate a phytochemicals-based standardized aqueous ethanolic extract of Rubia cordifolia (SERC) to explore its pharmacological potential in PCOS-induced female rats and elucidate its mechanism. HPLC analysis revealed the presence of phytochemicals such as chlorogenic acid, p-coumaric acid, gallic acid, and kaempferol. Thirty female adult rats were divided into two groups for induction of PCOS (5 female rats in the normal control group + 25 female rats in the disease-induced group). PCOS was induced by administering letrozole (1 mg/kg p.o.) for 6 weeks. After PCOS induction, animals of the disease-induced group were divided into five groups: one group used as disease control (PCOS) group, one group on metformin (20 mg/kg), and three groups on SERC (200, 400, and 600 mg/kg). Histopathological analysis showed that PCOS induction reduced corpus luteum and developing follicles and increased cystic follicles. In comparison, SERC treatment improved ovulation with more primary and developing follicles. SERC reduced the serum insulin, LH surge, and testosterone levels while improving the FSH, estrogen, and progesterone serum levels. SERC significantly improved the oxidation status of the liver and normalized the lipid profile and liver function markers. In conclusion, SERC treated PCOS, and the suggested mechanism might be the restoration of aromatase activity and background inflammatory status improvement in ovaries.