Removal Of Host Cell Proteins Research Articles

A Single-Step Method for Harvesting Influenza Viral Particles from MDCK Cell Culture Supernatant with High Yield and Effective Impurity Removal

A Single-Step Method for Harvesting Influenza Viral Particles from MDCK Cell Culture Supernatant with High Yield and Effective Impurity Removal

Host cell protein networks as a novel co-elution mechanism during protein A chromatography.

Host cell proteins (HCPs) are process-related impurities of therapeutic proteins produced in for example, Chinese hamster ovary (CHO) cells. Protein A affinity chromatography is the initial capture step to purify monoclonal antibodies or Fc-based proteins and is most effective for HCP removal. Previously proposed mechanisms that contribute to co-purification of HCPs with the therapeutic protein are either HCP-drug association or leaching from chromatin heteroaggregates. In this study, we analyzed protein A eluates of 23 Fc-based proteins by LC-MS/MS to determine their HCP content. The analysis revealed a high degree of heterogeneity in the number of HCPs identified in the different protein A eluates. Among all identified HCPs, the majority co-eluted with less than three Fc-based proteins indicating a drug-specific co-purification for most HCPs. Only ten HCPs co-purified with over 50% of the 23 Fc-based proteins. A correlation analysis of HCPs identified across multiple protein A eluates revealed their co-elution as HCP groups. Functional annotation and protein interaction analysis confirmed that some HCP groups are associated with protein-protein interaction networks. Here, we propose an additional mechanism for HCP co-elution involving protein-protein interactions within functional networks. Our findings may help to guide cell line development and to refine downstream purification strategies.

Understanding virus retention mechanisms on protein a chromatography based on using different wash buffers – Evaluating the possibility for a generic wash buffer toolbox to improve virus clearance capacity

During manufacturing of mammalian-cell derived monoclonal antibodies (mAbs) virus clearance capacity of the downstream process has to be demonstrated. The protein A chromatography step typically achieves less than 4 log10 and is not considered as a major contributing step. Having been successfully applied to host cell protein removal before, we used different wash buffers for three mAbs with two model viruses (Minute virus of mice and Murine leukemia virus) in series as well as separately to further understand major contributing interactions for virus retention and potentially design a generic toolbox of stringent wash buffers to be applied to various mAbs. Results indicate a major relevance of hydrophobic interaction for Murine leukemia virus (xMuLV) and mAb A, based on improved clearance for buffers additionally containing increased levels of hydrophobic compounds. This effect was less pronounced for Minute virus of mice (MVM), whereby hydrogen-bonds were expected to play a stronger role for this model virus. Additionally, electrostatic interactions presumably are more relevant for MVM retention compared to xMuLV under the conditions evaluated. A generic mAb and virus-independent stringent wash buffer toolbox could not be identified. However, based on our results a customized mAb and virus wash buffer design with improved virus clearance is possible, with here demonstrated log reduction increase by 1.3 log10 for MVM and 2.2 log10 for xMuLV for the protein A step compared to equilibration buffer alone.

High-performance countercurrent membrane purification for host cell protein removal from monoclonal antibody products.

The transition to continuous biomanufacturing has led to renewed interest in alternative approaches for downstream processing of monoclonal antibody (mAb) products. In this study, we examined the potential of using high-performance countercurrent membrane purification (HPCMP) for the removal of host cell proteins (HCPs) derived from Chinese Hamster Ovary cells in the purification of a mAb. Initial studies used several model proteins to identify appropriate operating conditions for the hollow fiber membrane modules. HPCMP was then used for mAb purification, with mAb yield >95% and more than 100-fold reduction in HCP. Stable operation was maintained for 48 h for feeds that were first prefiltered through the 3MTM Harvest RC chromatographic clarifier to remove DNA and other foulants. In addition, the Process Mass Intensity for HPCMP can be much less than that for alternative HCP separation processes. These results highlight the potential of using HPCMP as part of a fully continuous mAb production process.

Biomimetic affinity chromatography for antibody purification: Host cell protein binding and impurity removal

Peptide affinity chromatography has received increasing attention as an alternative to protein A chromatography in antibody purification. However, its lower selectivity than protein A chromatography has impeded its success in practical applications. In particular, efficient removal of contaminants, including host cell proteins (HCPs) and DNA, is a great challenge for peptide affinity chromatography in monoclonal antibody (mAb) manufacturing. In this work, a biomimetic peptide ligand (bPL), FYWHCLDE, was coupled onto Sepharose 6 Fast Flow (SepFF) to synthesize a peptide affinity gel, SepFF-bPL, for the investigation of the binding mechanism of HCP as well as the feasibility of antibody capture. The results showed that the SepFF-bPL column exhibited effective removal of mAb aggregates as well as mAb capture from feedstocks of various origins, whereas poor removal of HCP and DNA was found. Mechanistic studies of HCP binding indicated that electrostatic interactions dominated HCP binding on the SepFF-bPL gel and that ionic conductivity had a significant influence on HCP binding at low salt concentrations. Thus, combined chromatin extraction and anion exchange adsorption were introduced prior to SepFF-bPL chromatography for initial contaminant removal to reduce mAb aggregation induced by HCP and the loading burden of contaminants in SepFF-bPL chromatography. A proof-of-concept study of the purification train demonstrated a high recovery of mAb (68.7%) and low levels of HCP (23 ppm) and DNA (below the limit of detection) in the final product, which were acceptable for the mandatory requirements in clinical applications. This research provided a deep understanding of HCP binding on the peptide affinity column and led to the development of an effective purification train.

Pseudo-affinity capture of K. phaffii host cell proteins in flow-through mode: Purification of protein therapeutics and proteomic study

K. phaffii is a versatile expression system that is increasingly utilized to produce biological therapeutics – including enzymes, engineered antibodies, and gene-editing tools – that feature multiple subunits and complex post-translational modifications. Two major roadblocks limit the adoption of K. phaffii in industrial biomanufacturing: its proteome, while known, has not been linked to downstream process operations and detailed knowledge is missing on problematic host cell proteins (HCPs) that endanger patient safety or product stability. Furthermore, the purification toolbox has not evolved beyond the capture of monospecific antibodies, and few solutions are available for engineered antibody fragments and other protein therapeutics. To unlock the potential of yeast-based biopharmaceutical manufacturing, this study presents the development and performance validation of a novel adsorbent – PichiaGuard – functionalized with peptide ligands that target the whole spectrum of K. phaffii HCPs and designed for protein purification in flow-through mode. The PichiaGuard adsorbent features high HCP binding capacity (∼25 g per liter of resin) and successfully purified a monoclonal antibody and an ScFv fragment from clarified K. phaffii harvests, affording > 300-fold removal of HCPs and high product yields (70–80%). Notably, PichiaGuard outperformed commercial ion exchange and mixed-mode resins without salt gradients or optimization in removing high-risk HCPs – including aspartic proteases, ribosomal subunits, and other peptidases – thus demonstrating its value in modern biopharmaceutical processing.

Label-free shotgun proteomics: Exploiting a reliable and sensitive method to monitor residual host-cell proteins in monoclonal antibody products

The removal of host cell proteins (HCPs) remains a challenge in the downstream processing of monoclonal antibodies (mAbs). It is critical to monitor residual HCPs since they can have an impact on product stability and safety. The enzyme-linked immunosorbent assay (ELISA) only quantifies the total amount of HCPs and does not indicate the identity or quantity of any specific HCP. Mass spectrometry-based proteomics applications demonstrate an advantage in quantitatively profiling individual HCPs. However, technical reproducibility, dynamic range, and ensuring an acceptable statistical significance of scoring measurements are critical hurdles that ought to be overcome. In this paper, we describe a sensitive and reproducible shotgun proteomics approach that includes an efficient mAb depletion strategy and addresses the shortcomings of such workflows. Our methodology is potentially a valuable complement or alternative to ELISA. Additionally, it can facilitate the purification process development and the evaluation of ELISA kits upon process changes.

Cationic polymer precipitation for enhanced impurity removal in downstream processing.

Precipitation can be used for the removal of impurities early in the downstream purification process of biologics, with the soluble product remaining in the filtrate through microfiltration. The objective of this study was to examine the use of polyallylamine (PAA) precipitation to increase the purity of product via higher host cell protein removal to enhance polysorbate excipient stability to enable a longer shelf life. Experiments were performed using three monoclonal antibodies (mAbs) with different properties of isoelectric point and IgG subclass. High throughput workflows were established to quickly screen precipitation conditions as a function of pH, conductivity and PAA concentrations. Process analytical tools (PATs) were used to evaluate the size distribution of particles and inform the optimal precipitation condition. Minimal pressure increase was observed during depth filtration of the precipitates. The precipitation was scaled up to 20L size and the extensive characterization of precipitated samples after protein A chromatography showed >75% reduction of host cell protein (HCP) concentrations (by ELISA),>90% reduction of number of HCP species (by mass spectrometry), and >99.8% reduction of DNA. The stability of polysorbate containing formulation buffers for all three mAbs in the protein A purified intermediates was improved at least 25% after PAA precipitation. Mass spectrometry was used to obtain additional understanding of the interaction between PAA and HCPs with different properties. Minimal impact on product quality and <5% yield loss after precipitation were observed while the residual PAA was <9 ppm. These results expand the toolbox in downstream purification to solve HCP clearance issues for programs with purification challenges, while also providing important insights into the integration of precipitation-depth filtration and the current platform process for the purification of biologics.

Comparison of host cell protein removal by depth filters with diatomaceous earth and synthetic silica filter aids using model proteins.

A number of studies have demonstrated that depth filtration can provide significant adsorptive removal of host cell proteins (HCP), but there is still considerable uncertainty regarding the underlying factors controlling HCP binding. This study compared the binding characteristics of two fine grade depth filters, the X0SP (polyacrylic fiber with a synthetic silica filter aid) and X0HC (cellulose fibers with diatomaceous earth (DE) as a filter aid), using a series of model proteins with well-defined physical characteristics. Protein binding to the X0SP filter was dominated by electrostatic interactions with greatest capacity for positively-charged proteins. In contrast, the X0HC filter showed greater binding of more hydrophobic proteins although electrostatic interactions also played a role. In addition, ovotransferrin showed unusually high binding capacity to the X0HC, likely due to interactions with metals in the DE. Scanning Electron Microscopy with Energy Dispersive Spectroscopy was used to obtain additional understanding of the binding behavior. These results provide important insights into the physical phenomena governing HCP binding to both fully synthetic and natural (cellulose + DE) depth filters.

Integrated double flow-through purification of monoclonal antibodies using membrane adsorbers and single-pass tangential flow filtration

A flow-through process for monoclonal antibody (mAb) purification has been created by integrating two different membrane adsorbers (MAs) with single-pass tangential flow filtration (SPTFF) for continuous buffer exchange. First, a design of experiments (DoE) was carried out to investigate the influence of pH and conductivity on the removal of desoxyribonucleic acid (DNA) and host cell proteins (HCP), and to select buffer conditions for mAb flow-through mode operation for four different MAs. As next, breakthrough curve experiments were performed with the selected buffer conditions for each MA to analyze the binding behavior of mAb, DNA, and HCP. Then, the influence of the MA sequence in the double flow-through process on the mAb yield and DNA and HCP removal was studied in batch mode. The best sequence of MAs was used for the final integrated double flow-through polishing process, where the MAs were directly connected via SPTFF. The flow-through of the first (anion exchange) MA was continuously diafiltrated via SPTFF to buffer conditions for the second (cation exchange) MA. In this way, DNA (< 2 ppm) and HCP (< 29 ppm) were removed with simultaneously high mAb yield. Moreover, 36 times higher throughput was obtained than with a standard process that combines a packed-bed column with CEX resin in a bind and elute mode with an AEX MA in flow-through mode.

Methods for addressing host cell protein impurities in biopharmaceutical product development.

The high demand for monoclonal antibody (mAb) therapeutics in recent years has resulted in significant efforts to improve their costly manufacturing process. The high cost of manufacturing mAbs derives mainly from the purification process, which contributes to 50%-80% of the total manufacturing cost. One of the main challenges facing industry at the purification stage is the clearance of host cell proteins (HCPs) that are produced and often co-purified with the desired mAb product. One of the issues HCPs can cause is the degradation of the final mAb protein product. In this review, techniques are considered that can be used at different stages (upstream and downstream) of mAb manufacture to improve HCP clearance. In addition to established techniques, many new approaches for HCP removal are discussed that have the potential to replace current methods for improving HCP reduction and thereby the quality and stability of the final mAb product.

Quality by Design in Downstream Process Development of Romiplostim

Background: Downstream processing of therapeutic recombinant proteins expressed as the inclusion bodies (IBs) in E. coli is quite challenging. This study aimed to use the quality by design approach for developing the multi-step downstream process of a structurally complex therapeutic Fc-Peptide fusion protein, romiplostim. Methods: For development of a successful downstream process, risk analysis and experimental designs were used to characterize the most critical quality attributes (CQAs) and effects of process parameters on these quality attributes. Results: The solubilization of IBs was optimized by design of experiment on three parameters with a focus on solubility yield, which resulted in >75% increase of the target protein solubilization. The pH of sample was identified as CQA in anion exchange chromatography that might have an impact on achieving >85% host cell proteins removal and >90% host cell DNA reduction. In the refolding step, process parameters were screened. Cystine/cysteine ratio, pH, and incubation time identified as CPPs were further optimized using Box-Behnken analysis, which >85% of the target protein was refolded. The design space for further purification step by HIC was mapped with a focus on high molecular weight impurities. After polishing by gel filtration, the final product's biological activity showed no statistically significant differences among the groups received romiplostim and Nplate®, as the reference product. Conclusion: This research presents a precise and exhaustive model for mapping the design space in order to describe and anticipate the link between the yield and quality of romiplostim and its downstream process parameters.

Formation of transient highly-charged mAb clusters strengthens interactions with host cell proteins and results in poor clearance of host cell proteins by protein A chromatography

Protein A chromatography with a high salt wash usually leads to robust clearance of host cell proteins (HCPs) in most recombinant monoclonal antibodies (mAbs), but a small subset of recalcitrant mAbs show significant HCP copurification. In this study, we carried out systematic studies using 4 different mAbs to explore the HCP copurification mechanism. HCP identification results revealed that the 3 high-HCP mAbs had many common HCPs which do not copurify with the low-HCP mAb, suggesting a similar mechanism is at play. Through wash evaluation, surface patch analysis, chain-swapping, domain evaluation, and structure-guided mutations, several charged residues in each mAb were found which correlated with HCP copurification. Surprisingly, these residues are also critical for self-association propensity. We observed an inverse correlation between diffusion interaction parameter and HCP copurification. Each of the high-HCP mAbs could form dynamic clusters consisting of 3∼6 mAb molecules. Therefore, a mAb cluster can exhibit higher net positive charges on the order of 3 to 6, compared with the individual mAb. In Protein A chromatography, high-HCP mAbs had elution tailing which contained high level of HCPs. Addition of Arginine-HCl or point mutations preventing cluster formation effectively reduced HCP copurification and elution tailing. Based on these results, we propose a novel HCP-copurification mechanism that formation of mAb clusters strengthens charge-charge interactions with HCPs and thus compromises HCP removal by Protein A chromatography. Besides arginine, histidine under acidic pH conditions prevented cluster formulation and resulted in effective HCP removal. Finally, structure-guided protein engineering and solution screening by using cluster size as indicator are useful tools for managing mAbs with high-HCP issues.

Towards continuous mAb purification: Clearance of host cell proteins from CHO cell culture harvests via "flow-through affinity chromatography" using peptide-based adsorbents.

The growth of advanced analytics in manufacturing monoclonal antibodies (mAbs) has highlighted the challenges associated with the clearance of host cell proteins (HCPs). Of special concern is the removal of "persistent" HCPs, including immunogenic and mAb-degrading proteins, that co-elute from the Protein A resin and can escape the polishing steps. Responding to this challenge, we introduced an ensemble of peptide ligands that target the HCPs in Chinese hamster ovary (CHO) cell culture fluids and enable mAb purification via flow-through affinity chromatography. This study describes their integration into LigaGuard™, an affinity adsorbent featuring an equilibrium binding capacity of ~30 mg of HCPs per mLof resin as well as dynamic capacities up to 16 and 22 mg/mlat 1- and 2-minresidence times, respectively. When evaluated against cell culture harvests with different mAb and HCP titers and properties, LigaGuard™ afforded high HCP clearance, with logarithmic removal values (LRVs) up to 1.5, and mAb yield above 90%. Proteomic analysis of the effluents confirmed the removal of high-risk HCPs, including cathepsins, histones, glutathione-S transferase, and lipoprotein lipases. Finally, combining LigaGuard™ for HCP removal with affinity adsorbents for product capture afforded a global mAb yield of 85%, and HCP and DNA LRVs > 4.

Highly Efficient Purification of Recombinant VSV-∆G-Spike Vaccine against SARS-CoV-2 by Flow-Through Chromatography.

This study reports a highly efficient, rapid one-step purification process for the production of the recombinant vesicular stomatitis virus-based vaccine, rVSV-∆G-spike (rVSV-S), recently developed by the Israel Institute for Biological Research (IIBR) for the prevention of COVID-19. Several purification strategies are evaluated using a variety of chromatography methods, including membrane adsorbers and packed-bed ion-exchange chromatography. Cell harvest is initially treated with endonuclease, clarified, and further concentrated by ultrafiltration before chromatography purification. The use of anion-exchange chromatography in all forms results in strong binding of the virus to the media, necessitating a high salt concentration for elution. The large virus and spike protein binds very strongly to the high surface area of the membrane adsorbents, resulting in poor virus recovery (<15%), while the use of packed-bed chromatography, where the surface area is smaller, achieves better recovery (up to 33%). Finally, a highly efficient chromatography purification process with CaptoTM Core 700 resin, which does not require binding and the elution of the virus, is described. rVSV-S cannot enter the inner pores of the resin and is collected in the flow-through eluent. Purification of the rVSV-S virus with CaptoTM Core 700 resulted in viral infectivity above 85% for this step, with the efficient removal of host cell proteins, consistent with regulatory requirements. Similar results were obtained without an initial ultrafiltration step.

Detection and quantitation of host cell proteins in monoclonal antibody drug products using automated sample preparation and data-independent acquisition LC-MS/MS

Ensuring the removal of host cell proteins (HCPs) during downstream processing of recombinant proteins such as monoclonal antibodies (mAbs) remains a challenge. Since residual HCPs might affect product stability or safety, constant monitoring is required to demonstrate their removal to be below the regulatory accepted level of 100 ng/mg. The current standard analytical approach for this procedure is based on ELISA; however, this approach only measures the overall HCP content. Therefore, the use of orthogonal methods, such as liquid chromatography-mass spectrometry (LC-MS), has been established, as it facilitates the quantitation of total HCPs as well as the identification and quantitation of the individual HCPs present. In the present study, a workflow for HCP detection and quantitation using an automated magnetic bead-based sample preparation, in combination with a data-independent acquisition (DIA) LC-MS analysis, was established. Employing the same instrumental setup commonly used for peptide mapping analysis of mAbs allows for its quick and easy implementation into pre-existing workflows, avoiding the need for dedicated instrumentation or personnel. Thereby, quantitation of HCPs over a broad dynamic range was enabled to allow monitoring of problematic HCPs or to track changes upon altered bioprocessing conditions.

Development of an activated carbon filtration step and high throughput screening method to remove host cell proteins from a recombinant enzyme process.

An increasing number of non-mAb recombinant proteins are being developed today. These biotherapeutics provide greater purification challenges where multiple polishing steps may be required to meet final purity specifications or the process steps may require extensive optimization. Recent studies have shown that activated carbon can be employed in downstream purification processes to selectively separate host cell proteins (HCPs) from monoclonal antibodies (mAb). However, the use of activated carbon as a unit operation in a cGMP purification process is relatively new. As such, the goal of this work is to provide guidance on development approaches, insight into operating parameters and solution conditions that can impact HCP removal, as well as further investigate the mechanism of removal by using mass spectrometry. In this work, activated carbon was evaluated to remove HCPs in the downstream purification process of a recombinant enzyme. Impact of process placement, flux (or residence time), and mass loading on HCP removal was investigated. Feasibility of high throughput screening (HTS) using loose activated carbon was assessed to reduce the amount of therapeutic protein needed and enable testing of a larger number of solution conditions. Finally, mass spectrometry was used to determine the population of HCPs removed by activated carbon. Our work demonstrates that activated carbon can be used effectively in downstream processes of biopharmaceuticals to remove HCPs (up to a 3 log10 reduction) and that an HTS format can be implemented to reduce material demands by up to 23x and allow for process optimization of this adsorbent for purification purposes.

Quantitative interpretation of protein breakthrough curves in small-scale depth filter modules for bioprocessing

Depth filters are used throughout downstream bioprocessing, with specialized filter chemistries developed for removal of host cell proteins, DNA, and protein aggregates. These filters often show very broad breakthrough curves, but there have not been any previous analyses of this phenomenon. Protein breakthrough curves were evaluated for Ribonuclease A and α-chymotrypsin in two small-scale depth filter modules using PDH4 media containing diatomaceous earth. Computational fluid dynamics (CFD) simulations were developed, with flow in the porous media described using the modified Navier-Stokes equations incorporating a Brinkman flow term and a Langmuir binding model. The breakthrough curve in the stainless-steel module was much sharper than that in the commercial Supracap™ 50 capsule due to the more uniform axisymmetric flow field. The behavior in the Supracap™ 50 capsule was more complex, with multiple inflection points observed due to the different flow paths and the time-dependent saturation of the two layers of the depth filter media. These results provide important insights into the factors controlling protein binding/breakthrough in commercial depth filter modules.

Development of Peptide Ligands for Targeted Capture of Host Cell Proteins from Cell Culture Production Harvests.

Capture of host cell proteins (HCPs) from cell culture production harvests is critical to ensure the maximum levels specified by international regulatory bodies of product purity for therapeutic monoclonal antibodies (mAbs). Peptide ligands that selectively target the whole spectrum of the HCPs, while letting the mAb product flow through unbound, are an ideal complement to the affinity-based capture step via Protein A chromatography. In this work, we describe the development of HCP-binding peptide ligands, especially focusing on the steps of (1) peptide selection via library screening and (2) quantification of HCP removal via proteomics by mass spectrometry.

Removal of host cell proteins from cell culture fluids by weak partitioning chromatography using peptide-based adsorbents

This work presents the removal of host cell proteins (HCPs) from a Chinese Hamster Ovary clarified cell culture fluid (CHO CCCF) containing a therapeutic monoclonal antibody (mAb) by weak partitioning chromatography (WPC). The chromatographic adsorbents were produced by functionalizing Toyopearl resin with HCP-binding tetrameric multipolar (4MP) or hexameric hydrophobic/cationic (6HP) peptides. The CCCF was loaded on columns packed with either 4MP-Toyopearl or 6HP-Toyopearl resin only, or a 4MP and 6HP resin mixture at different values of residence time (RT: 0.5, 1, 2, and 5 min). The temporal profiles of concentration of HCPs and mAb in the effluents confirmed the binding mechanism by WPC, where both HCPs and mAb are initially bound by the peptide ligands, but, as more CCCF is fed to the column, the incoming HCPs displace the bound mAbs. In particular, 4MP was shown to capture more selectively high molecular weight HCPs, while 6HP was more effective in binding low molecular weight HCPs. Under optimal loading conditions (~60–80 g of proteins per L of adsorbent; RT of 5 min), the 6HP+4MP-Toyopearl adsorbent provided mAb yield and purity of >80% and up to 90%, respectively. Conversely, the control resin Toyopearl SuperQ-650 M resulted in 70% yield and 75% purity under the same conditions. Proteomic analysis of the effluents demonstrated that 6HP+4MP-Toyopearl adsorbent removes HCPs known for their immunogenicity or IgG co-elution or degradation, demonstrating the potential of these peptide-based resins as HCP scrubbers in mAb purification processes.