Horseradish Peroxidase Labeling Research Articles

Multiplex signal amplification for ultrasensitive CRP assay via integrated electrochemical biosensor array using MOF-derived carbon material and aptamers

Accurate and precise detection of disease-associated proteins, such as C-reactive protein (CRP), remains a challenge in biosensor development. Herein, we present a novel approach－an integrated disposable aptasensor array－designed for precise, ultra-sensitive, and parallel detection of CRP in plasma samples. This integrated biosensing array platform enables multiplex parallel testing, ensuring the accuracy and reliability in sample analysis. The ultra-sensitivity of this biosensor is achieved through multiplex signal amplification. Leveraging the superior conductivity and extensive surface area of MOF-derived nanoporous carbon material (CMOF), the biosensor enhances recognition elements (aptamers) by catalyzing the horseradish peroxidase (HRP) label enzyme reaction to multiply the number of probe molecules. Optimized conditions yielded exceptional performance, exhibiting high accuracy (relative standard deviation, RSD≤10.0 %), a low detection limit (0.3 pg/mL, S/N = 3), ultra-sensitivity (0.16 μA/ng mL−1 mm−2), and a rapid response (seven parallel tests within 60 min). Importantly, this multi-unit integrated disposable aptasensor array accurately quantified CRP in human serum, demonstrating comparable results to commercial enzyme–linked immunosorbent assay (ELISA). This technology showcases promise for detecting various biomarkers using a unified approach, presenting an appealing strategy for early disease diagnosis and biological analysis.

Impact of bridge heterology on functional parameters of ELISA for 17α-methyltestosterone

In this study, we have developed bridge heterologous ELISA for the detection of 17α- Methyltestosterone by incorporating aromatic spacers between 17α-Methyltestosterone-3-Carboxymethyloxime and Horseradish peroxidase label through N-hydroxysuccinimide mediated carbodiimide reaction method. The immunogen 17α-Methyltestosterone-3-Carboxymethyloxime-Bovine serum albumin used to generate the antibody was also prepared by the N-hydroxysuccinimide mediated carbodiimide reaction without using any spacer. We have studied the impact of bridge/aromatic spacers on functional parameters i.e. sensitivity, affinity and ED50 of the bridge heterologous assay and compared it with homologous assay. The five combinations of bridge heterologous assay using 17α-Methyl testosterone-3-CMO-BSA antiserum and 17α-MT-3-CMO-4,4’-Diaminodiphenyl sulphide-HRP, 17α MT-3-CMO-4,4’-Oxydianiline-HRP, 17α-MT-3-CMO-Benzidine-HRP, 17α- MT-3-CMO-p-Phenylenediamine-HRP and 17α-MT-3-CMO-Dapson-HRP enzyme conjugates were evaluated. Out of these five combinations, the combination 17α-MT-3-CMO-BSA with 17α-MT-3-CMO-Benzidine-HRP showed the best results. Sensitivity, affinity and ED50 were improved and found to be 0.02 ng/mL, 0.086 × 10−8 L/mol and 2.95 ng/mL than homologous assay where Sensitivity, affinity and ED50 were 0.11 ng/mL, 0.02 × 10−8 L/mol and 5.78 ng/mL respectively. The cross-reactivity for this bridge heterologous assay combination was seen with only 4 steroids (6-hydrotestosterone- 6%, Testosterone-5.14%, Danazol-0.9% and Nandrolone-0.85%) instead of eight steroids (6-hydrotestosterone-43.75%, Testosterone-38.3%, Danazol-25.14%, Androstenediol-19.16%, Nandrolone-19%, Metandienone-5%, Androstenedione-3.52%, and 17α dimethyltestosterone-2%) as in homologous assay out of 59 structurally related steroids.Thus, the results of this study conclude that the incorporation of aromatic spacer (bridge) in enzyme conjugate has a crucial role in improving sensitivity, specificity, ED50 and affinity of the developed assay. The assay was then studied for parameters such as recovery (97.4%–108.6%), precision (Inter and Intra-assay coefficient of variation <10%), correlation coefficient (R2 = 0.96) by comparing with the commercial kit and validated by measuring levels of 17α- methyltestosterone in rat serum after administering them.

Ultrastructure of Rat Rostral Nucleus of the Solitary Tract Terminals in the Parabrachial Nucleus and Medullary Reticular Formation.

Neurons in the rostral nucleus of the solitary tract (rNST) receive taste information from the tongue and relay it mainly to the parabrachial nucleus (PBN) and the medullary reticular formation (RF) through two functionally different neural circuits. To help understand how the information from the rNST neurons is transmitted within these brainstem relay nuclei in the taste pathway, we examined the terminals of the rNST neurons in the PBN and RF by use of anterograde horseradish peroxidase (HRP) labeling, postembedding immunogold staining for glutamate, serial section electron microscopy, and quantitative analysis. Most of the anterogradely labeled, glutamate-immunopositive axon terminals made a synaptic contact with only a single postsynaptic element in PBN and RF, suggesting that the sensory information from rNST neurons, at the individual terminal level, is not passed to multiple target cells. Labeled terminals were usually presynaptic to distal dendritic shafts in both target nuclei. However, the frequency of labeled terminals that contacted dendritic spines was significantly higher in the PBN than in the RF, and the frequency of labeled terminals that contacted somata or proximal dendrites was significantly higher in the RF than in the PBN. Labeled terminals receiving axoaxonic synapses, which are a morphological substrate for presynaptic modulation frequently found in primary sensory afferents, were not observed. These findings suggest that the sensory information from rNST neurons is processed in a relatively simple manner in both PBN and RF, but in a distinctly different manner in the PBN as opposed to the RF.

Development and evaluation of a chemiluminescence immunoassay for type Ⅰ procollagen N-terminal peptide

To develop a magnetic nanoparticle chemiluminescence immunoassay (CLIA) for the determination of type Ⅰ procollagen N-terminal peptide (PINP) in human serum, we expressed a recombinant PINP-α1 protein in Corynebacterium glutamicum and used it as an immunogen to immunize BALB/c mice. We obtained three hybridoma cell lines that stably secret antibody against PINP-α1 protein. After further pairing and screening, we chose a monoclonal antibody 8C12 coupled with biotin as the capture antibody, and a monoclonal antibody 1F11 labeled horseradish peroxidase as the detection antibody. The antibodies combined with the serum samples, forming a sandwich complex which was used to detect the concentration of PINP in serum. After optimizing the conditions, we determined that the best working concentration of the capture antibody and the detection antibody were 3 μg/mL, and the incubation time was 30 minutes. The quantitative assay had a detection range of 5-1 100 ng/mL, with recovery rates between 93%-107% and the minimum detection limit of 1.22 ng/mL achieved. The intra-and inter-assay precisions were lower than 10%. The correlation coefficient of PINP results between this CLIA method and the Roche electrochemiluminescence immunoassay system was 0.906 2. Therefore, this CLIA method is specific and can be used to quantitatively detect the content of PINP in serum, which has the potential to become an auxiliary approach for bone disease examination.

Sensitive electrochemical immunosensor to detect prohibitin 2, a potential blood cancer biomarker

Blood cancers are difficult to cure completely and frequently show a poor prognosis. Recently, prohibitin 2 (PHB2) has been shown to be a potential biomarker for blood cancers. Sandwich ELISA can be used as a reference method for quantitative analysis of PHB2; however, ELISA can be challenging for early diagnosis and continuous monitoring method due to the need for large sample volumes (25 μL <), technical expertise, complex procedure, relative high cost, and non-portability. Thus, this study developed a sensitive and time efficient electrochemical immunosensor for detecting PHB2 from a blood cancer patient. It is a simple and portable platform consisting of a disposable electrode and blood sample volume of 4 μL. The sensor uses a gold nanostructured electrode and square wave voltammetry (SWV) measurement of a horseradish peroxidase (HRP) label to amplify the electrochemical signal. The immunosensor could quantitatively detect PHB2 with high sensitivity (limit of detection [LoD] = 0.04 ng/mL) and satisfactory reproducibility (relative standard deviation [RSD] <5.2%). The sensor achieved an LoD of 0.63 ng/mL with satisfactory recovery (89.1–104.7%) and reproducibility (RSD <6.4%) with PHB2 spiked into white blood cell (WBC) lysates. When the sensor was compared to a reference ELISA to determine the PHB2 concentrations in WBC lysate samples from healthy patients and those with blood cancer, the correlation coefficient (R2) was 0.996. A 3.3-fold difference was detected in the measured PHB2 concentration between blood cancer patients and healthy individuals. Accordingly, this study suggests a sensitive and accurate analytical method for quantitatively detecting the PHB2 in blood samples.

Electrochemical biosensing of DENV nucleic acid amplified with triplet nanostructure-mediated dendritic hybridization chain reaction

A universal and highly sensitive electrochemical biosensing strategy was developed by using a triplet nanostructure-mediated dendritic hybridization chain reaction (HCR) for the analysis of Dengue virus (DENV) nucleic acid. A locked dsDNA was firstly recognized by the target DENV nucleic acid fragment to release the initiator, which was then captured by a capture DNA modified gold electrode to initiate the HCR in the presence of biotin labeled substrates A and B, and two helpers. After the recognition reactions of the captured initiator with substrate A and then helper 1, one DNA structure was formed to react with substrate B, which produced a triplet nanostructure to trigger the dendritic HCR by the toehold of the hybridization structure. After the dendritic product was bound with avidin labeled horseradish peroxidase (avidin-HRP), an amperometric signal could be obtained to achieve ultrasensitive electrochemical detection of DENV. The non-enzymatic isothermal amplification was driven only by entropy. The stable three-dimensional dendritic nanostructure with rigid double helix could assure the excellent performance of the designed electrochemical biosensing strategy. The proposed method showed a detection range of 1.6–1000 pM with a detection limit of 188 fM and ability to distinguish single-base mutation. By changing the recognition sequence of the initiator, the detection of different DENV nucleic acid fragments could be achieved with the same performance. Thus, this method had good extendability for other nucleic acids, providing a promising candidate for nucleic acid detection in early clinical diagnosis.

Prostate Cancer Diagnosis in the Clinic Using an 8-Protein Biomarker Panel.

The inability to distinguish aggressive from indolent prostate cancer is a longstanding clinical problem. Prostate specific antigen (PSA) tests and digital rectal exams cannot differentiate these forms. Because only ∼10% of diagnosed prostate cancer cases are aggressive, existing practice often results in overtreatment including unnecessary surgeries that degrade patients' quality of life. Here, we describe a fast microfluidic immunoarray optimized to determine 8-proteins simultaneously in 5 μL of blood serum for prostate cancer diagnostics. Using polymeric horseradish peroxidase (poly-HRP, 400 HRPs) labels to provide large signal amplification and limits of detection in the sub-fg mL-1 range, a protocol was devised for the optimization of the fast, accurate assays of 100-fold diluted serum samples. Analysis of 130 prostate cancer patient serum samples revealed that some members of the protein panel can distinguish aggressive from indolent cancers. Logistic regression was used to identify a subset of the panel, combining biomarker proteins ETS-related gene protein (ERG), insulin-like growth factor-1 (IGF-1), pigment epithelial-derived factor (PEDF), and serum monocyte differentiation antigen (CD-14) to predict whether a given patient should be referred for biopsy, which gave a much better predictive accuracy than PSA alone. This represents the first prostate cancer blood test that can predict which patients will have a high biopsy Gleason score, a standard pathology score used to grade tumors.

An electrochemiluminescence aptamer sensor for chloramphenicol based on GO-QDs nanocomposites and enzyme-linked aptamers

In this paper, CdS quantum dots (QDs) were synthesized. Positively charged poly(diallyldimethylammonium chloride) (PDDA) and negatively charged CdS quantum dots were sequentially adsorbed on the surface of graphene oxide (GO). The nano-luminescent materials GO-QDs were prepared and characterized by UV–Vis absorption spectroscopy, fluorescence spectroscopy and transmission electron microscopy. The GO-QDs were then modified on the surface of glassy carbon electrode (GCE). Chloramphenicol aptamer (apt) of 5′-end modified biotin hybridized with the aptamer complementary strand (cDNA) of 5′-end modified amino group into double-stranded DNA (dsDNA). The double-stranded DNA was bonded onto the surface of GO-QDs modified electrode. When the electrode was incubated with streptavidin - labeled horseradish peroxidase (SA-HRP), the biotin modified at the end of the chloramphenicol aptamer can specifically bind directly to the streptavidin labeled HRP. Therefore, HRP was bonded to the surface of the electrode. Hydrogen peroxide was used as the co-reactant of the QDs. HRP can thereby consume hydrogen peroxide and can weaken the electrochemiluminescence intensity. Chloramphenicol in solution can specifically bind to the aptamer to form a composite and to unwind the dsDNA. Then the composite was detached from the surface of the electrode. HRP also left the electrode surface along with the aptamer, so that the electrochemiluminescence signal was significantly enhanced. The electrochemiluminescence intensity of the sensor showed a linear correlation with the logarithm of chloramphenicol concentration. The linear range was 1.0 × 10−12–1.0 × 10−7 M, the detection limit is 0.5 pM. The reproducibility, stability and specificity of the sensor were also studied. The sensor was used for the determination of chloramphenicol in samples and satisfactory results were obtained.

Tape-Stripping Electrochemical Detection of Melanoma

A noninvasive electrochemical melanoma detection approach based on using adhesive tapes for collecting and fixing cells from a suspicious skin area and transferring the cells into a scanning electrochemical microscope (SECM) is presented. The adhesive layer collects the cells reproducibly and keeps them well adhered on the tape during experiments in an electrolyte solution. A melanoma biomarker, here the intracellular enzyme tyrosinase (TYR), was imaged on the tape-collected cells without further cell lysing using antibodies that were labeled with horseradish peroxidase (HRP). The HRP labels catalyzed the oxidation of a dissolved redox-active species, which was detected at a soft microelectrode, gently brushed in contact mode over the tape. The melanoma biomarker was first detected on tape-stripped samples with murine melanoma cells of different concentrations. Thereafter, increasing levels of TYR were recorded in cells that were collected from the skin of melanoma mouse models representing three different stages of tumor growth. Additionally, SECM results of tape-stripped different human melanoma cell lines were confirmed by previous studies based on traditionally fixed and permeabilized cells.

Aptamer-Structure Switch Coupled with Horseradish Peroxidase Labeling on a Microplate for the Sensitive Detection of Small Molecules.

Detection of small molecules with good sensitivity, high throughput, simplicity, and generality using aptamers is desired but still remains challenging. We described an aptamer-structure-switch assay coupled with horseradish peroxidase (HRP) labeling on microplates for sensitive absorbance and chemiluminescence detection of small molecules. This assay relies on competition for affinity binding to a limited HRP-labeled aptamer between small-molecule targets and immobilized short DNA strands complementary to the aptamer (cDNA) on a microplate. In the absence of targets, the HRP-labeled aptamer hybridizes with the cDNA on the microplate, and HRP catalyzes substrate into product, generating absorbance or chemiluminescence signals. The binding of small-molecule targets to aptamers causes displacement of HRP-labeled aptamers from the cDNA and signal decrease. In chemiluminescence-analysis mode, the assay achieved detection of aflatoxin B1 (AFB1), ochratoxin A (OTA), and adenosine triphosphate (ATP) with detection limits of 10 pM, 20 pM, and 20 nM, respectively. This assay does not require enzyme-labeled small molecules or the conjugation of small molecules on solid phase. HRP, as an enzyme label, here allows for easily obtainable and highly active signal amplification. This microplate assay is rapid and promising for high-throughput analysis. It shows potential for wide applications in the detection of small molecules.

An ultrasensitive electrochemical immunosensor for procalcitonin detection based on the gold nanoparticles-enhanced tyramide signal amplification strategy

In this study, we established an ultrasensitive electrochemical immunosensor based on the gold nanoparticles-enhanced tyramide signal amplification (AuNPs-TSA) for the detection of procalcitonin (PCT, for discriminating bacterial infections from nonbacterial infections). Firstly, a facilely prepared, well-conducting reduced graphene oxide nanosheets/GNP (rGO-AuNPs) nanocomposite was synthesized and immobilized on the electrode surface to absorb more capture antibodies (Ab1). Next another nanocomposite, acting as a signal tool, was modified with detection antibody (Ab2) and horseradish peroxidase (HRP), and then backfilled by bovine serum albumin (BSA). Because a single AuNP is able to load multiple HRPs and BSAs, a number of tyramine labeled biotins (T-B) could be deposited on the proteins adhering to the surface of AuNPs. Moreover, the high affinity between streptavidin (SA) and biotins significantly increases the loading of streptavidin labeled horseradish peroxidase (SA-HRP). The amplification system which was based on the two nanocomposites mentioned above, effectively amplified the electric current signals. This immunosensor exhibits a wide dynamic detection range from 0.05 ng mL−1 to 100 ng mL−1 and with an ultralow detection limit of 0.1 pg mL−1. We have successfully utilized this immunosensor to quantify the concentration of PCT in human serum samples, and the results suggest its potential use in clinical application.

A Self-Contained Chemiluminescent Lateral Flow Assay for Point-of-Care Testing.

Immunoassays whose readouts rely on chemiluminescence are increasingly useful for a broad range of analytical applications, but they are rarely made into point-of-care (POC) format because of the complex reagents required (some reagents have to be stored in low temperatures, and some reagents have to be freshly made right before the assay). This study reports a self-contained chemiluminescent lateral flow assay (CLFA), which prestores all necessary reagents. This CLFA contains three parts: the normal lateral flow assay (LFA) strip, the chemiluminescence substrate pad, and the polycarbonate (PC) holder. On the LFA strip, we simultaneously labeled horseradish peroxidase (HRP) and antibody on the gold nanoparticles (AuNPs) for the conjugate pad. For the substrate pad, we used sodium perborate as the oxidant and lyophilized the chemiluminescence substrate on the glass fiber, which allows long-term storage. After the transfer of substrate from the substrate pad to the nitrocellulose (NC) membrane, we captured the chemiluminescence signal for the quantification of the targets. The HRP on the AuNPs can amplify the chemiluminescence signal efficiently. We used this CLFA system to detect both macromolecules and small molecules successfully. This self-contained and easily processable device is exceedingly appropriate for rapid detection and is a convenient platform for POC testing.

Sandwich electrochemical thrombin assay using a glassy carbon electrode modified with nitrogen- and sulfur-doped graphene oxide and gold nanoparticles

Graphene oxide doped with nitrogen and sulfur was decorated with gold nanoparticles (AuNP-SN-GO) and applied as a substrate to modify a glassy carbon electrode (GCE). An aptamer against the model protein thrombin was self-assembled on the modified GCE which then was exposed to thrombin. Following aptamer-thrombin interaction, biotin-labeled DNA and aptamer 2 are immobilized on another AuNP-SN-GO hybrid and then are reacted with the thrombin/AuNP-SN-GO/GCE to form a sandwich. The enzyme label horseradish peroxidase (HRP) was then attached to the electrode by biotin-avidin interaction. HRP catalyzes the oxidation of hydroquinone by hydrogen peroxide. This generates a strong electrochemical signal that increases linearly with the logarithm of thrombin concentration in the range from 1.0 × 10-13M to 1.0 × 10-8M with a detection limit of 2.5 × 10-14M (S/N = 3). The assay is highly selective. It provides a promising strategy for signal amplification. In our perception, it has a large potential for sensitive and selective detection of analytes for which appropriate aptamers are available. Graphic abstract A sandwich-type electrochemical aptasensor is fabricated for detection of thrombin using a glassy carbon electrode modified with nitrogen- and sulfur-doped graphene oxide and gold nanoparticles.

Ultrasensitive detection of Shiga toxin 2 and its variants in Shiga toxin-producing Escherichia coli strains by a time-resolved fluorescence immunoassay.

A rapid and sensitive two-step time-resolved fluorescence immunoassay (TRFIA) was developed for the detection of Shiga toxin 2 (Stx2) and its variants in Shiga toxin-producing Escherichia coli (STEC) strains. In sandwich mode, a monoclonal antibody against Stx2 was coated on a microtiter plate as a capture antibody. A tracer antibody against Stx2 labeled with europium(III) (Eu3+ ) chelate was then used as a detector, followed by fluorescence measurements using time-resolved fluorescence. The sensitivity of Stx2 detection was 0.038ng/ml (dynamic range, 0.1-1000ng/ml). The intra- and inter-assay coefficients of variation of the assay were 3.2% and 3.6%, respectively. The performance of the established assay was evaluated using culture supernatants of STEC strains, and the results were compared to those of a common HRP (horseradish peroxidase) labeling immunosorbent assay. A polymerase chain reaction (PCR) for the detection of genes encoding Stx1 and Stx2 was used as the reference for comparison. Correlation between the Stx2-specific TRFIA and PCR was calculated by the use of kappa statics, exhibiting a perfect level of agreement. The availability of the sensitive and reliable Stx2-specific TRFIA method for quantifying Stx2 and its variants in STEC strains will complement bacteria isolation-based platform and aid in the accurate and prompt diagnosis of STEC infections.

A Compatible Sensitivity Enhancement Strategy for Electrochemiluminescence Immunosensors Based on the Biomimetic Melanin-Like Deposition.

In this work, a compatible strategy was demonstrated for the enhancement of detection sensitivity of sandwich-type electrochemiluminescence (ECL) immunosensors. The enhanced signal response was based on the combination of biomimetic melanin-like deposition with the effective ECL quenching ability of quinone-rich biopolymers. Gold nanoparticle-loaded horseradish peroxidase (HRP) was used as a catalytic label for the secondary antibodies. The intrinsic catalytic property of HRP toward hydrogen peroxide (H2O2) generates reactive oxygen species, which highly promote the autopolymerization of catecholamines. The resulting fast deposition of quinone-rich biopolymers approaching the luminophor-incorporated sensing platform achieves an obvious ECL quenching. A broad-spectrum tumor marker alpha fetoprotein (AFP) was selected as a model analyte to demonstrate the feasibility of the proposed strategy. Under optimal conditions, a very low detection limit of 0.056 pg mL-1 was obtained. Two orders of magnitude enhancement was achieved in contrast to the signal response without the step of catalytic biopolymer deposition. The combination of compatible HRP labeling with unique melanin-like deposition has potential as a universal strategy in other ECL bioassays.

Dopamine-mediated immunoassay for bacteria detection.

Traditional enzyme-linked immunosorbent assay (ELISA) with sufficient sensing specificity is a useful analytical approach for the detection of toxicologically important substances in in vivo systems or complicated biological systems. Increasing worldwide demand for analyses of bacteria by signal amplification and increasing concern regarding their safe development and use require a simple, stable, and sensitive detection assay for target evaluation and clinical diagnosis. A sensitive and selective immunoassay for detection of bacteria is constructed that combines horseradish peroxidase (HRP)-catalyzed signal amplification with the strong linker of the polydopamine-biotin complex on the surface of solid substances or biomolecules. The incorporation of HRP labeling and amplification increases the detection sensitivity by about one to two orders of magnitude compared with conventional ELISA systems. A linear relationship between the response and the logarithm of the bacterial concentration was observed in the range from 1.5 × 102 to 1.5 × 107 colony-forming units per milliliter. This work demonstrates a new signal-amplification-based dopamine-mediated process for the development of a sensitive method. This dopamine-mediated immunoassay may be broadly applied in clinical diagnoses and for the monitoring of water environmental pollution. The approach proposed is distinct with simple protocols and easy processes, which allow it to be applied in a broad area.

Development of a thiol‐ene based screening platform for enzyme immobilization demonstrated using horseradish peroxidase

Efficient immobilization of enzymes on support surfaces requires an exact match between the surface chemistry and the specific enzyme. A successful match would normally be identified through time consuming screening of conventional resins in multiple experiments testing individual immobilization strategies. In this study we present a versatile strategy that largely expands the number of possible surface functionalities for enzyme immobilization in a single, generic platform. The combination of many individual surface chemistries and thus immobilization methods in one modular system permits faster and more efficient screening, which we believe will result in a higher chance of discovery of optimal surface/enzyme interactions. The proposed system consists of a thiol-functional microplate prepared through fast photochemical curing of an off-stoichiometric thiol-ene (OSTE) mixture. Surface functionalization by thiol-ene chemistry (TEC) resulted in the formation of a functional monolayer in each well, whereas, polymer surface grafts were introduced through surface chain transfer free radical polymerization (SCT-FRP). Enzyme immobilization on the modified surfaces was evaluated by using a rhodamine labeled horseradish peroxidase (Rho-HRP) as a model enzyme, and the amount of immobilized enzyme was qualitatively assessed by fluorescence intensity (FI) measurements. Subsequently, Rho-HRP activity was measured directly on the surface. The broad range of utilized surface chemistries permits direct correlation of enzymatic activity to the surface functionality and improves the determination of promising enzyme-surface candidates. The results underline the high potential of this system as a screening platform for synergistic immobilization of enzymes onto thiol-ene polymer surfaces. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1267-1277, 2017.

PtNPs as Scaffolds to Regulate Interenzyme Distance for Construction of Efficient Enzyme Cascade Amplification for Ultrasensitive Electrochemical Detection of MMP-2.

The high catalytic efficiency of enzyme cascade reaction mainly depends on optimal interenzyme distance regulated by the special scaffolds. In this work, the rigid PtNPs with different sizes were employed as scaffolds to regulate interenzyme distance for efficient enzyme cascade amplification to construct electrochemical biosensor for sensitive detection of matrix metalloproteinases-2 (MMP-2), which overcame the drawbacks of instable construction and sophisticated preparation induced by conventional scaffolds such as metal-organic frameworks (MOFs), DNA nanostructures. Here, cucurbit[7]uril functionalized PtNPs (CB[7]@PtNPs) was utilized to load ferrocene (Fc)-labeled horseradish peroxidase (HRP) and glucose oxidase (GOx) via host-guest interaction between Fc and CB[7], respectively, resulting in the formation of a stable three-dimensional netlike structure containing amounts of enzymes. Interestingly, the enzyme cascade reaction regulated by 10 nm PtNPs as scaffold showed highly catalytic efficiency. Meanwhile, the PtNPs could also serve as catalyst to accelerate the enzyme cascade reaction with further enhanced catalytic efficiency. As a result, the proposed biosensor exhibited excellent sensitivity with a wide linear range of 0.1 pg·mL-1 to 20 ng·mL-1 and a detection limit of 0.03 pg·mL-1 for MMP-2. Such a strategy opened a new avenue for adopting metal nanoparticles to regulate interenzyme distance for efficient enzyme cascade amplification, thus providing a universal and easy operating method for sensitively detecting various targets such as DNA, metal ion, and protein.

Optimized dendrimer-encapsulated gold nanoparticles and enhanced carbon nanotube nanoprobes for amplified electrochemical immunoassay of E. coli in dairy product based on enzymatically induced deposition of polyaniline

A highly sensitive immunosensor was reported for Escherichia coli assay in dairy product based on electrochemical measurement of polyaniline (PAn) that was catalytically deposited by horseradish peroxidase (HRP) labels. Herein, the immunosensor was developed by using poly(amidoamine) dendrimer-encapsulated gold nanoparticles (PAMAM(Au)) as sensing platform. Importantly, the optimal HAuCl4/PAMAM ratio was investigated to design the efficient PAMAM(Au) nanocomposites. The nanocomposites were proven to not only increase the amount of immobilized capture antibody (cAb), but also accelerate the electron transfer process. Moreover, the {dAb-CNT-HRP} nanoprobes were prepared by exploiting the amplification effect of multiwalled carbon nanotubes (CNTs) for loading detection antibody (dAb) and enormous HRP labels. After a sandwich immunoreaction, the quantitatively captured nanoprobes could catalyze oxidation aniline to produce electroactive PAn for electrochemical measurement. On the basis of signal amplification of the PAMAM(Au)-based immunosensor and the {dAb-CNT-HRP} nanoprobes, the proposed strategy exhibited a linear relationship between the peak current of PAn and the logarithmic value of E. coli concentration ranging from 1.0×102 to 1.0×106cfumL−1 with a detection limit of 50cfumL−1 (S/N=3), and the electrochemical detection of E. coli could be achieved in 3h. The electrochemical immunosensor was also used to determine E. coli in dairy product (pure fresh milk, infant milk powder, yogurt in shelf-life and expired yogurt), and the recoveries of standard additions were in the range of 96.8–108.7%. Overall, this method gave a useful protocol for E. coli assay with high sensitivity, acceptable accuracy and satisfying stability, and thus provided a powerful tool to estimate the quality of dairy product.

Rapid and sensitive identification of marine bacteria by an improved in situ DNA hybridization chain reaction (quickHCR-FISH)

Catalyzed reporter deposition-fluorescence in situ hybridization (CARD-FISH) with rRNA-targeted oligonucleotide probes has significantly improved the identification of microorganisms in various environmental samples. However, one of the major constraints of CARD-FISH is the low probe penetration due to the high molecular weight of the horseradish peroxidase (HRP) label. Recently, this limitation has been overcome by a novel signal amplification approach termed in situ DNA-hybridization chain reaction (in situ DNA-HCR). In this study, we present an improved and accelerated in situ DNA-HCR protocol (quickHCR-FISH) with increased signal intensity, which was approximately 2 times higher than that of standard in situ DNA-HCR. In addition, the amplification time was only 15min for the extension of amplifier probes from the initiator probe compared to 2h in the original protocol. The quickHCR-FISH was successfully tested for the quantification of marine bacteria with low rRNA contents in both seawater and sediment samples. It was possible to detect the same number of marine bacteria with quickHCR-FISH compared to CARD-FISH within only 3h. Thus, this newly developed protocol could be an attractive alternative to CARD-FISH for the detection and visualization of microorganisms in their environmental context.