Homologous Series Research Articles

Randomly cross-linked amphiphilic copolymer networks of n-butyl acrylate and N,N-dimethylacrylamide: synthesis and characterization

Abstract Five randomly cross-linked amphiphilic copolymer networks (ACPN) were prepared via the free radical cross-linking copolymerization of the hydrophobic n-butyl acrylate (BuA) and the hydrophilic N,N-dimethylacrylamide (DMAAm), in the presence of a small amount (5 mol% with respect to the sum of BuA plus DMAAm monomers) of the hydrophobic 1,6-hexanediol diacrylate (HexDA) cross-linker, initiated by 4,4ʹ-azobis(4-cyanovaleric acid) in 1,4-dioxane at a 10 % w/v total monomer concentration. The five ACPNs differed in their BuA content, fixed at 10, 30, 50, 70 and 90 mol%. The two homopolymer networks, BuA and DMAAm, were also prepared using the same polymerization method. Thus, this study involved a total of seven polymer networks, forming a homologous series with BuA contents ranging from 0 to 100 mol%. These networks were characterized in terms of their degrees of swelling in tetrahydrofuran (THF) and water, their mechanical properties in water, and their adhesion to human skin. The degrees of swelling (DS) of the networks in THF were higher than those in water because THF is a non-selective solvent, whereas water is selective for the hydrophilic DMAAm units. The DSs in THF increased with the network content in the less polar BuA units, while the opposite was true for the DSs in water which decreased with the content in the hydrophobic BuA units from 11 (0 mol% BuA) down to 1.1 (100 mol% BuA). A maximum in the elastic modulus was observed for the hydrogel with 50 mol% BuA, reflecting the opposing effects of polymer composition in soft polymer (polyBuA) content and hydrogel water content. In contrast, the tensile strain at break increased monotonically with the hydrogel BuA content, reaching a remarkable ∼900 % for the hydrogel with 90 mol% BuA. Finally, the adhesion of the ACPNs, both in their dried and hydrated states, onto human skin was explored. The adhesion of the hydrated samples onto skin was stronger than that of the dried ones. The hydrated ACPN with 30 mol% BuA exhibited the strongest adhesion onto skin, attributable to the best combination of a rather high content in polar DMAAm units (70 mol%), and a rather low aqueous DS (∼2.5), with the low DS value causing only a small dilution in the DMAAm units participating in the polar interactions with skin. The present work demonstrates that, even in this synthetically simple ACPN system, the multiple effects of ACPN composition on a certain property, in some cases opposing and in some other cooperating, lead to a rather complicated behavior. In particular, as the BuA content increases, some properties display maxima (elastic modulus, stress at break and fracture energy of hydrated ACPNs, and adhesion of hydrated ACPNs onto skin) while some other properties exhibit monotonic increases (strain at break of hydrated ACPNs, and adhesion of dried ACPNs onto skin). Thus, the optimal ACPN for a particular application will highly depend on the property best-serving the particular application, e.g., the ACPNs with 30, 50 and 90 mol% BuA for strongest wet adhesion to skin, stiffest hydrogel response, and highest hydrogel extensibility and toughness, respectively.

Coumarin Schiff base derivatives with alkyl 4’-formyl-biphenyl-4-carboxylate: design, synthesis, mesomorphic studies and DFT calculations

ABSTRACT Symmetric and unsymmetric homologous series of coumarin Schiff base derivatives with alkyl 4’-formyl-biphenyl-4-carboxylate have been synthesised and studied for their mesomorphic behaviour. In the symmetric homologous series of Schiff base derivatives BPES(6–16), alkoxy chain length was varied at both ends of the molecules with n = 6,8,10,12,14,16, while in the unsymmetric homologous series of Schiff base derivatives 10BPEU(2–12), chain length was varied at coumarin end only (n = 2–8,10,12). In symmetric homologous series, compounds BPES(6–10) (n = 6,8,10) exhibited enantiotropic smectic A (SmA) mesophase, while smectic C (SmC) mesophase in cooling cycle only. SmC mesophase became prominent on increasing the chain length n = 12,14,16 in BPES(12–16). In the unsymmetric homologous series 10BPEU(2–12), compound with n = 2 showed monotropic nematic mesophase and highly stable (~165 °C) SmA mesophase. Higher analogues in unsymmetric series were turned biphasic and showed SmA as well as SmC mesophase during cooling scan only. Compound with n = 12 showed stable enantiotropic SmC mesophase (~92 °C). VT-XRD analysis of symmetric compound with n = 12, showed the tilted SmC mesophase. Further DFT calculations were investigated for un/symmetric series along with the literature molecules with similar variations and compared for various structural (length, aspect ratio) and electronic (dipole moment, polarisability) parameters to establish correlation with observed mesomorphic behaviour.

Symmetrical liquid crystalline dimers containing azo and azomethine linkages: synthesis, characterisation, mesomorphic study and DFT studies

ABSTRACT In the current study, one new series of symmetrical liquid crystalline homologous series of dimers with a rigid aromatic core with azo and azomethine group were synthesized using an ether-linking group. Several spectroscopic methods, including FT-IR, 1H-NMR, 13C-NMR and elemental analysis, were used to describe the synthesised dimers. The differential scanning calorimetry (DSC) and polarised optical microscopy (POM) were used to assess their mesomorphic properties. The results showed that the number of methylene spacers significantly affected the thermal properties of the synthesized dimers. To ascertain photophysical behaviour, UV-visible spectroscopy was employed. All the dimers of the present series show excellent enantiotropic nematic mesophase. The relationships between structure and its mesogenic property, the effects of various flexible spacers, the mesophase ranges, and the photo-isomerization of liquid crystalline dimers were all investigated. DFT study was carried out to gain a better understanding of structural features.

Effect of Organic Cation Adsorption on Ion-Transport Selectivity in a Cation-Permselective Nanopore Membrane.

A key knowledge gap in the emerging field of nanofluidics concerns how the ionic composition and ion-transport properties of a nanoconfined solution differ from those of a contacting bulk solution. We and others have been using potentiometric concentration cells, where a nanopore or nanotube membrane separates salt solutions of differing concentrations to explore this issue. The membranes studied contained a fixed pore/tube wall anionic charge, which ideally would prohibit anions and salt from entering the pore/tube-confined solution. We have been investigating experimental conditions that allow for this ideally permselective cation state to be achieved. Results of potentiometric investigations of a polymeric nanopore membrane (10 ± 2 nm-diameter pores) with anionic charge due to carbonate are presented here. While studies of this type have been reported using alkaline metal and alkaline earth cations, there have been no analogous studies using organic cations. This paper uses a homologous series of tetraalkylammonium ions to address this knowledge gap. The key result is that, in contrast to the inorganic cations, the ideal cation-permselective state could not be obtained under any experimental conditions for the organic cations. We propose that this is because these hydrophobic cations adsorb onto the polymeric pore walls. This makes ideality impossible because each adsorbed alkylammonium must bring a charge-balancing anion, Cl-, with it into the nanopore solution. The alkylammonium adsorption that occurred was confirmed and quantified by using surface contact angle measurements.

The Ce-Ni-Si System Revisited: More Homologue Compounds?

The nickel-rich region of the system Ce-Ni-Si has been reinvestigated utilizing X-ray single-crystal, powder, and electron diffraction as well as electron microprobe and thermal analyses. Two novel hexagonal compounds, τ-Ce20+xNi36+ySi30-z and τ'-Ce30+xNi50+ySi42-z, were identified. The crystal structure of τ-Ce20+xNi36+ySi30-z was derived from single-crystal X-ray diffraction and found to be isotypic with the Sm10Ni20.8P15-type structure (S.G. P63/m, x = 1.8, y = 3.0, z = 1.8, a = 2.07156(2) nm, c = 0.39990(1) nm, RF = 0.048). Rietveld refinement of τ'-Ce30+xNi50+ySi42-z revealed isotypism with Tb15Ni28P21 (S.G. P63/m, a = 2.46926(13) nm, c = 0.40019(3) nm, RF = 0.058). The compound Ce3Ni4Si2 from X-ray single-crystal analysis was found to crystallize in a novel structure type with monoclinic unit cells (S.G. C2/c, a = 1.54708(3) nm, b = 0.58677(1) nm, c = 0.74331(1) nm, β = 102.985(1)°, RF = 0.017). This compound belongs to a new homologue series in the RE-Ni-Si system (RE = La and Ce) with general formula of RE(3×2n)Ni(3×2n+1)Si(2n+1); n = 0,1, ..., ∞. The crystal structure of this series is characterized by alternating numbers (2n) of corner-sharing Si-polyhedral blocks sandwiched between zigzag nickel chains. Higher-order members of this series are produced by the formation of more corner-sharing Si-polyhedral blocks due to removal of nickel chains.

Coumarin Schiff base derivatives with 4′-alkoxy biphenyl-4-carboxaldehyde: Synthesis, mesomorphic studies and DFT calculations

Two homologous series of coumarin Schiff base derivatives with 4′-alkoxy biphenyl-4-carboxaldehyde have been designed and synthesized. All the compounds were analyzed IR, 1H NMR, 13C NMR, ESI-MS and CHN analysis followed by mesomorphic properties polarizing optical microscopy (POM) and differential scanning calorimetry (DSC) analysis. In the first homologous series BPS(6–16), Schiff base of 7-alkoxy-3-aminocoumarin with 4′-alkoxy biphenyl-4-carboxaldehyde, alkoxy chain length was varied systematically at both end of the molecules such as n = 6,8,10,12,14,16. In this series, BPS(6–10) (n = 6,8,10) exhibited enantiotropic nematic(N) and smectic C (SmC) mesophase and turned to monophasic on increasing the chain length n = 12,14,16 in BPS(12–16) with stable SmC mesophase. While in the second homologous series 10BPU(2–16), systemic variation of alkoxy chain length was carried out at coumarin end only (n = 2–18) and 4′-decyloxy-biphenyl-4-carboxaldehyde was used for Schiff base formation. In the this series, early member of the series with n = 2,3 showed enantiotropic very stable (∼ 145 °C) nematic mesophase, while N as well as SmC mesophase were observed for n = 4–8 at, whereas with increase of chain length stability of nematic mesophase was decreased and that of SmC was increased. Higher membered analogous 10BPU(12–16) exhibited SmC mesophase with stability in the rage of 130–160 °C. VT-XRD analysis was also confirmed the tilted SmC mesophase in this class of compounds. For both the series, all compounds were studied for the DFT calculations as well as literature molecules with similar variations. Based on the calculated structural (length, aspect ratio) and electronic (dipole moment, polarizability) parameters were correlated with mesomorphic behaviour observed for literature compounds and compounds from both the series followed by the detailed discussion.

Optimization of Cyanocobalamin (Vitamin B12) Sorption onto Mesoporous Superparamagnetic Iron Oxide Nanoparticles.

The techniques used to detect and quantify cyanocobalamin (vitamin B12) vary considerably in terms of detection sensitivity, from the most sensitive, based on radioisotopes and mass spectrometry (MS) with limits of detection (LOD) in fg mL-1, to fluorescence (FL) and surface plasmon resonance (SPR) biosensors with LOD values in the range of a few µg mL-1. For accurate quantification of an analyte present at trace levels in complex biological matrices, a selective separation and enrichment step is required to overcome matrix interferences and ensure sufficient detection sensitivity. In this study, iron oxide magnetic nanoparticles (IONPs) were used for the extraction and initial preconcentration of cyanocobalamin (vitamin B12). In the dependence of the magnetization on the H-field (hysteresis loop), no coercivity and remanence values were found at 300 K, indicating the superparamagnetic properties of the tested IONPs. Perfluorinated acids were used as amphiphilic agents to allow the sorption of cyanocobalamin onto the IONPs. FT-IR/ATR spectroscopy was used to confirm the sorption of cyanocobalamin on the IONPs. The influence of the addition of a homologous series of perfluorinated acids such as trifluoroacetic acid (TFAA), heptafluorobutyric acid (HFBA), and trichloroacetic acid (TCAA) to the extraction mixture was tested considering their type, mass, and time required for effective sorption. The adsorption kinetics and isotherm, described by the Freundlich and Langmuir equations, were analyzed. The maximum adsorption capacity (qm) exceeded 6 mg g-1 and was 8.9 mg g-1 and 7.7 mg g-1 for HFBA and TCAA, respectively, as the most efficient additives. After the desorption process using aqueous KH2PO4 solution, the sample was finally analyzed spectrophotometrically and chromatographically. The IONP-based method was successfully applied for the isolation of cyanocobalamin from human urine samples. The results showed that the developed approach is simple, cheap, accurate, and efficient for the determination of traces of cyanocobalamin in biological matrices.

Key umami taste contributors in Longjing green tea uncovered by integrated means of sensory quantitative descriptive analysis, metabolomics, quantification analysis and taste addition experiments

Umami taste is a key criteria of green tea quality evaluation. The aim of this study was to comprehensively explore the key umami taste contributors in Longjing tea. The taste and molecular profiles of 36 Longjing green tea infusions were characterized by sensory quantitative descriptive analysis and LC-MS based metabolomics, respectively. By uni−/multi-variate statistical analysis, 84 differential compounds were screened among tea infusions with varied umami perceptions. Among them, 17 substances were identified as candidate umami-enhancing compounds, which showed significant positive correlations with umami intensities. Their natural concentrations were accurately quantified, and their umami taste-modifying effects were further investigated by taste addition into glutamic acid solution. Glutamic acid, aspartic acid, glutamine, theanine, phenylalanine, histidine, theogallin, galloylglucose, 1,2,6-trigalloylglucose significantly enhanced the umami taste. This study uncovered for the first time of some bitter amino acids and galloylglucose homologous series as important umami-enhancers, which provided a novel perspective into the tea taste.

Synthesis, structure and mesogenic properties of benzoxazole derivatives

ABSTRACT Two new homologous series of mesogenic compounds, alkanoic acid 4-{[4-(6-chloro-benzooxazol-2-yl)-phenylimino]-methyl}-3-hydroxy-phenyl ester (3a-c) and alkcanoic acid 4-(6-chloro-benzooxazol-2-yl)-3-hydroxy-phenyl ester (5a-b) incorporating benzoxazole heterocyclic have been prepared and FT-IR, NMR, and MS spectrometry have been used to study the molecular structures. The mesogenic behaviour was examined using POM, DSC, and PXRD (variable temperature) techniques. To evaluate its impact on thermal behaviour and mesomorphic properties, the imine linking group of derivatives was modified and investigated. Enantiotropic SmA is observed by the members of Series-I, while those of series-II show monotropic SmA mesomorphism. These compounds were also examined for their absorption and fluorescent properties. The absorption and photoluminescence spectra of compounds 3a-c occurred at 345 nm and 410 nm, whereas in the case of 5a-b occurred at 325 nm and 370 nm respectively. The GAUSSIAN-09 programme has been utilised to perform DFT calculations at B3LYP level for the purpose of obtaining the stable electronic structures of 3a and 5a.

Charge Relay Without Proton Transfer: Coupling of Two Short Hydrogen Bonds via Imidazole in Models of Catalytic Triad of Serine Protease Active Site.

A homologous series of 20 substituted alcohol-imidazole-acetate model complexes imitating the charge relay system in Ser-His-Asp catalytic triad of serine proteases is considered quantum-chemically. We show qualitatively that the geometries of alcohol-imidazole and imidazole-acetate short hydrogen bonds are strongly coupled via the central imidazole and such complexes are capable of effectively relaying the charge from acetate to alcohol moiety upon relatively small concerted proton displacements. We hypothesize an alternative catalytic mechanism of serine proteases that does not require two complete proton transfers or hydrogen bond breakage between Ser and His residues.

Screening of Complex Layered Chalcogenide Structures as High-Performance Thermoelectrics by High-Throughput Calculations

Thermoelectric materials have drawn much attention over the last two decades due to the increase in global energy demand. However, designing efficient thermoelectrics reveals itself as a tough task for their properties (Seebeck coefficient, electrical conductivity, thermal conductivity) are mutually opposed. Hence, most recently, new design approaches have appeared, among which high-throughput methods have been implemented either experimentally or computationally. In this work, a high-throughput computer program has been designed to generate over 4000 structures based on a small set of complex layered chalcogenide compounds taken from the mAIVBVI nA2VB3VI homologous series, where AIV is Ge, AV is Sb and BVI is Te. The computer-generated structures have been investigated using density-functional theory methods, and the electronic and transport properties have been calculated. It has been found, using the quantum theory of atoms in molecules and crystals, that a wide variety of bond types constitutes the bonding network of the structures. All the structures are found to have negative formation energies. Among the obtained final structures, 43 are found with a wide band gap energy (>0.25 eV), 358 with semi-conductor/metal characteristics, and 731 with metallic characteristics. The transport properties calculations, using the Boltzmann equation, reveal that two p-type and 86 n-type structures are potentially promising compounds for thermoelectric applications.

A mountaineering strategy to excited states: Accurate vertical transition energies and benchmarks for substituted benzenes.

In an effort to expand the existing QUEST database of accurate vertical transition energies [Véril et al.WIREs Comput.Mol.Sci. 2021, 11, e1517], we have modeled more than 100 electronic excited states of different natures (local, charge-transfer, Rydberg, singlet, and triplet) in a dozen of mono- and di-substituted benzenes, including aniline, benzonitrile, chlorobenzene, fluorobenzene, nitrobenzene, among others. To establish theoretical best estimates for these vertical excitation energies, we have employed advanced coupled-cluster methods including iterative triples (CC3 and CCSDT) and, when technically possible, iterative quadruples (CC4). These high-level computational approaches provide a robust foundation for benchmarking a series of popular wave function methods. The evaluated methods all include contributions from double excitations (ADC(2), CC2, CCSD, CIS(D), EOM-MP2, STEOM-CCSD), along with schemes that also incorporate perturbative or iterative triples (ADC(3), CCSDR(3), CCSD(T)(a) , and CCSDT-3). This systematic exploration not only broadens the scope of the QUEST database but also facilitates a rigorous assessment of different theoretical approaches in the framework of a homologous chemical series, offering valuable insights into the accuracy and reliability of these methods in such cases. We found that both ADC(2.5) and CCSDT-3 can provide very consistent estimates, whereas among less expensive methods SCS-CC2 is likely the most effective approach. Importantly, we show that some lower order methods may offer reasonable trends in the homologous series while providing quite large average errors, and vice versa. Consequently, benchmarking the accuracy of a model based solely on absolute transition energies may not be meaningful for applications involving a series of similar compounds.

Origin and microbial degradation of thermogenic hydrocarbons within the sandy gas hydrate reservoirs in the Qiongdongnan Basin, northern South China Sea

Large-scale natural gas hydrate accumulations (generally over one billion cubic meters of natural gas) in coarse-grained marine sediments are the most valuable types for commercial exploration and exploitation. The formation of such a gas hydrate deposit generally requires a sufficient natural gas supply such as deeply buried thermogenic gas source. However, the worldwide discovered thermogenic gas hydrate deposits are rare, leaving relatively a poor understanding of their formation and evolution. Based on the geochemical and microbial analyses of eleven hydrate-related gas and five sediment samples from the thermogenic gas hydrate deposits in the Qiongdongnan Basin in northern South China Sea, we systematically investigated the origin and evolution of thermogenic hydrocarbons within sandy gas hydrate reservoirs. Results show that natural gas within high saturated gas hydrate-filled sandy sediments is predominately of thermogenic (the proportion is 57.1–70.5%), characterized by “dry gas” (99.38–99.7% C1, 0.26–0.47% C2 and <0.5% C3+), relatively lower C1/(C2+C3) ratio (187–376), and heavier δ13C–C1 values (−55.0 to −31.3‰). In addition, typical biomarkers (including the alkanes, tricyclic terpanes, hopanes and steranes) generated from mature source rocks were detected in the hydrate-filled fine sand reservoir, as well as the biomarker indicators (including the unresolved complex mixtures (UCMs) hump and the 25-norhopane homologous series) for severe hydrocarbon biodegradation. Furthermore, large amounts of hydrocarbon degrading bacteria (50.5% of bacteria) and methanogenic archaea (34.3% of archaea) were detected within hydrate-filled sandy sediment. Our results indicated that the deeply buried thermogenic source can indeed provide sufficient gas supply for the formation of a large-scale gas hydrate deposit, but thermogenic liquid hydrocarbons within gas hydrate reservoirs are very susceptible to be degraded and consumed by hydrocarbon degrading bacteria. In addition, we also found that the clay components of argillaceous gas hydrate reservoirs can adsorb and store large amounts of in situ immature organic matter, which can significantly obscure or cover up the original geochemical signatures of thermogenic hydrocarbons therein. These findings suggest that the relative contribution of deeply buried thermogenic source for gas hydrate accumulation worldwide may be underestimated, because we have previously ignored the fact that thermogenic hydrocarbons within gas hydrate reservoirs would be significantly consumed by hydrocarbon degrading microbes or diluted by in situ immature sedimentary organic matter. Our findings are highly significant for the evaluation and exploration of thermogenic gas hydrate accumulations worldwide.

Evolution of Surface Tension and Hansen Parameters of a Homologous Series of Imidazolium-Based Ionic Liquids.

In this study, we systematically analyze the surface tension and Hansen solubility parameters (HSPs) of imidazolium-based ionic liquids (ILs) with different anions ([NTf2]-, [PF6]-, [I]-, and [Br]-). These anions are combined with the classical 1-alkyl-3-methyl-substituted imidazolium cations ([CnC1Im]+) and a group of oligoether-functionalized imidazolium cations ([(mPEGn)2Im]+) based on methylated polyethylene glycol (mPEGn). In detail, the influences of the length of the alkyl- and the mPEGn-chain, the anion size, and the water content are investigated experimentally. For [CnC1Im]+-based ILs, the surface tension decreases with increasing alkyl chain length in all cases, but the magnitude of this decrease depends on the size of the anion ([NTf2]- < [PF6]- < [Br]- ≤ [I]-). Molecular dynamics (MD) simulations on [CnC1Im]+-based ILs indicate that these differences are caused by the interplay of charged and uncharged domains, in particular in the different anions, which affects the ability of the alkyl chains of the cation to orient toward the liquid-gas interface. An increase in the mPEGn-chain length of the [(mPEGn)2Im][A] ILs does not significantly influence the surface tension. These changes upon variation of the cation/anion combination do not correlate with the evolution of the HSPs for the two sets of ILs. Finally, our data suggest that significant water contents up to water mole fractions of x(H2O) = 0.25 do not significantly affect the surface tension of the studied binary IL-water mixtures.

Biphenyl based schiff base derivatives of 6-aminocoumarin: Design, synthesis, mesomorphic properties and DFT studies

The study focused on synthesizing two series of coumarin Schiff base liquid crystals. These series involved molecules with variations in alkoxy chains at aldehyde ends: one being the Schiff base with 4′‑hydroxy-[1,1′]-biphenyl-4-carbaldehyde (ASBP series) and the other being alkyl 4-formyl-[1,1′]-biphenyl-4-carboxylate (AEBP series). The compounds were characterized using FTIR, NMR, and Mass spectral analyses. All the compounds were studied for their mesomorphic properties, differential scanning calorimetry (DSC) and polarized optical microscopy (POM). In both the homologous series, variation of alkyl chain length showed intriguing phase transitions. In the first homologous series ASBP, compound with hexyloxy chain displayed an enantiotropic nematic (N) phase, while those with chain lengths n = 8–16 exhibited enantiotropic smectic A (SmA) mesophase. Similarly, in the AEBP series, compounds with n = 6,8 chain length showed an enantiotropic nematic (N) phase, while those with higher chain lengths n = 10–16 exhibited enantiotropic smectic A (SmA) phases. SmA mesophase was further confirmed by powdered XRD analysis. The study included DFT theoretical calculations to comprehend the compounds' mesomorphic behavior, comparing them with analogous reported compounds. Additionally, the investigation correlated experimental findings of individual compounds with calculated parameters like polarizability, dipole moment, and aspect ratio. Molecular electrostatic potential projections and analysis of frontier molecular orbitals were also employed to elucidate how polarity variations in terminal chains and mesogenic cores influenced the energy gap of FMOs and the distribution of electrostatic charges on these compounds. It has been found that the ASBP series has lower energy gap and higher dipole moment than the AEBP series.

Synthesis, mesomorphic behaviour, and DFT studies of biphenyl bis-ester Schiff base liquid crystals

A novel series of calamitic liquid crystals with rod-like structures, derived from biphenyl bis-ester, has been successfully synthesized. This was achieved through the condensation reaction of [1,1′-biphenyl]-4-yl 4-formylbenzoate with n-alkyl 4-aminobenzoate, where n ranges from 2 to 8, 10, 12, 14, 16, and 18. The synthesized compounds were characterized using FT-IR, 1H NMR, 13C NMR, and mass spectroscopy techniques. The liquid crystal behaviour of all synthesized compounds was investigated using Polarizing Optical Microscopy (POM) and Differential Scanning Calorimetry (DSC). It was found that all compounds within the homologous series exhibited mesogenic properties. The effect of molecular flexibility on the mesophase type and transition temperature range was systematically explored. Some compounds displayed a nematic phase, while others showed characteristics of the smectic A phase; additionally, certain compounds exhibited properties of both the nematic and smectic A phases. Furthermore, utilizing B3LYP/6–31++G (d,p) basis sets DFT level calculations and complete geometric optimization of the synthesized compounds was conducted. This optimization facilitated the examination of optimized geometrical structures, aspect ratios, dipole moments, polarizabilities, Frontier molecular orbitals, and molecular electrostatic potentials through DFT calculations.

Predicting hydrogenolysis reaction barriers of large hydrocarbons on metal surfaces using machine learning: Implications for polymer deconstruction

Calculating activation energies of chemical reactions for large reaction networks is computationally demanding. Traditional Brønsted-Evans-Polanyi (BEP) relationships are useful in this regard but are prone to substantial estimation errors. Here, we explore machine learning models to predict activation energies for hydrogenolysis reactions on transition metals, including Ru, Pt, and Rh. The curated dataset includes 380 DFT-calculated activation energies of C-C and C-H scission reactions ranging from C1 to C6 species. The mean absolute error of traditional BEPs is 0.30 eV, and published BEPs on smaller hydrocarbons give even larger errors. In comparison, an XGBoost model achieves a mean absolute error of 0.19 eV for the test set without needing additional DFT-calculated energies. The model selects the homologous series among reactions and the electronegativity and atomic mass of the metal atoms as key features. The model appears transferable across metals. This approach can provide accurate and rapid estimation of activation energies of large reaction networks, such as those in plastics recycling, to accelerate catalyst screening. We showcase the impact of hydrocarbon chain length and branching on the barriers, discuss implications for the depolymerization rate of isotactic polypropylene and low vs. high-density polyethylene, and demonstrate the feasibility of hydrogenolysis catalyst screening.

Structure, Self-Assembly, and Phase Behavior of Neuroactive N-Acyl GABAs: Doxorubicin Encapsulation in NPGABA/DPPC Liposomes and Release Studies.

N-Acylated amino acids and neurotransmitters in mammals exert significant biological effects on the nervous system, immune responses, and vasculature. N-Acyl derivatives of γ-aminobutyric acid (N-acyl GABA), which belong to both classes mentioned above, are prominent among them. In this work, a homologous series of N-acyl GABAs bearing saturated N-acyl chains (C8-C18) have been synthesized and characterized with respect to self-assembly, thermotropic phase behavior, and supramolecular organization. Differential scanning calorimetric studies revealed that the transition enthalpies and entropies of N-acyl GABAs are linearly dependent on the acyl chain length. The crystal structure of N-tridecanoyl GABA showed that the molecules are packed in bilayers with the acyl chains aligned parallel to the bilayer normal and that the carboxyl groups from opposite layers associate to form dimeric structures involving strong O-H···O hydrogen bonds. In addition, N-H···O and C-H···O hydrogen bonds between amide moieties of adjacent molecules within each layer stabilize the molecular packing. Powder X-ray diffraction studies showed odd-even alternation in the d spacings, suggesting that the odd chain and even chain compounds pack differently. Equimolar mixtures of N-palmitoyl GABA and dipalmitoylphosphatidylcholine (DPPC) were found to form stable unilamellar vesicles with diameters of ∼300-340 nm, which could encapsulate doxorubicin, an anticancer drug, with higher efficiency and better release characteristics than DPPC liposomes at physiologically relevant pH. These liposomes exhibit faster release of doxorubicin at acidic pH (<7.0), indicating their potential utility as drug carriers in cancer chemotherapy.

N-Heterocyclic Carbene to Actinide d-Based π-bonding Correlates with Observed Metal-Carbene Bond Length Shortening Versus Lanthanide Congeners.

Comparison of bonding and electronic structural features between trivalent lanthanide (Ln) and actinide (An) complexes across homologous series' of molecules can provide insights into subtle and overt periodic trends. Of keen interest and debate is the extent to which the valence f- and d-orbitals of trivalent Ln/An ions engage in covalent interactions with different ligand donor functionalities and, crucially, how bonding differences change as both the Ln and An series are traversed. Synthesis and characterization (SC-XRD, NMR, UV-vis-NIR, and computational modeling) of the homologous lanthanide and actinide N-heterocyclic carbene (NHC) complexes [M(C5Me5)2(X)(IMe4)] {X = I, M = La, Ce, Pr, Nd, U, Np, Pu; X = Cl, M = Nd; X = I/Cl, M = Nd, Am; and IMe4 = [C(NMeCMe)2]} reveals consistently shorter An-C vs Ln-C distances that do not substantially converge upon reaching Am3+/Nd3+ comparison. Specifically, the difference of 0.064(6) Å observed in the La/U pair is comparable to the 0.062(4) Å difference observed in the Nd/Am pair. Computational analyses suggest that the cause of this unusual observation is rooted in the presence of π-bonding with the valence d-orbital manifold in actinide complexes that is not present in the lanthanide congeners. This is in contrast to other documented cases of shorter An-ligand vs Ln-ligand distances, which are often attributed to increased 5f vs 4f radial diffusivity leading to differences in 4f and 5f orbital bonding involvement. Moreover, in these traditional observations, as the 5f series is traversed, the 5f manifold contracts such that by americium structural studies often find no statistically significant Am3+vs Nd3+ metal-ligand bond length differences.

Novel Schiff's base liquid crystalline trifluoromethoxy aniline derivatives of cinnamoyl ester

A novel homologous series of cinnamoyl ester encompassing of twelve homologues liquid crystal samples containing 4′-trifluoromethoxy aniline moiety have been designed and developed to understand their mesophase analysis using polarizing optical microscope, differential scanning calorimetry, spectral analysis and density functional theory approach. The prepared each samples show nematic-smectic A phase with good temperature range of mesophase affected by the variation of side alkyl chains. In addition, present LC samples of cinnamoyl ester trifluro derivatives were tested for their antimicrobial performance and the obtained results reveals a good biological potential for the studied LC homologous series.