Homogeneous Layer Research Articles

Transverse-electric surface plasmon polaritons in periodically modulated graphene

Transverse-electric (TE) surface plasmon polaritons are unique eigenmodes of a homogeneous graphene layer that are tunable with the chemical potential and temperature. However, as their dispersion curve spectrally lies below the light line, they cannot be resonantly excited by an externally incident wave. Here, we propose a way of exciting the TE modes and tuning their peaks in the transmission by introducing a one-dimensional graphene grating. Using the scattering-matrix formalism, we show that periodic modulation of graphene makes transmission more pronounced, potentially allowing for experimental observation of the TE modes. Furthermore, we propose the use of turbostratic graphene to enhance the role of the surface plasmon polaritons in optical spectra. Published by the American Physical Society 2024

On the use of elliptic PDEs for the parameterisation of planar multipatch domains

AbstractThis paper presents a parameterisation framework based on (inverted) elliptic PDEs for addressing the planar parameterisation problem of finding a valid description of the domain’s interior given no more than a spline-based description of its boundary contours. The framework is geared towards isogeometric analysis (IGA) applications wherein the physical domain is comprised of more than four sides, hence requiring more than one patch. We adopt the concept of harmonic maps and propose several PDE-based problem formulations capable of finding a valid map between a convex parametric multipatch domain and the piecewise-smooth physical domain with an equal number of sides. In line with the isoparametric paradigm of IGA, we treat the parameterisation problem using techniques that are characteristic for the analysis step. As such, this study proposes several IGA-based numerical algorithms for the problem’s governing equations that can be effortlessly integrated into a well-developed IGA software suite. We augment the framework with mechanisms that enable controlling the parametric properties of the outcome. Parametric control is accomplished by, among other techniques, the introduction of a curvilinear coordinate system in the convex parametric domain, for which more general elliptic PDEs are adopted. Depending on the application, parametric control allows for building desired features into the computed map, such as homogeneous cell sizes or boundary layers.

Moiré superlattices arising from growth induced by screw dislocations in layered materials

Abstract Moiré superlattices (MSLs) are modulated structures produced from homogeneous or heterogeneous two-dimensional layers stacked with a twist angle and/or lattice mismatch. Enriching the methods for fabricating MSL and realizing the unique emergent properties are key challenges on its investigation. Here we recommend that the spiral dislocation driven growth is another optional method for the preparation of high quality MSL samples. The spiral structure stabilizes the constant out-of-plane lattice distance, causing the variations in electronic and optical properties. Taking SnS2 MSL as an example, we find prominent properties including large band gap reduction (~0.4 eV) and enhanced optical activity. First-principles calculations reveal that these unusual properties can be ascribed to the locally enhanced interlayer interaction associated with the Moiré potential modulation. We believe that the spiral dislocation driven growth would be a powerful method to expand the MSL family and broaden their scope of application.

Near‐Inertial Wave Propagation in the Deep Canadian Basin: Turning Depths and the Homogeneous Deep Layer

Near‐Inertial Wave Propagation in the Deep Canadian Basin: Turning Depths and the Homogeneous Deep Layer

Silybum Marianum Extract: A Green Inhibitor for Iron Metal Corrosion and Bacterial Growth in Fresh and Marine Media

Egyptian Silybum marianum ethanolic-hexane crude extract efficiency was investigated as an inhibitor of bacterial growth and iron steel corrosion in fresh water and marine environment media. Iron steel corrosion inhibition rate was quantitatively measured by two methods: one as a concentration of iron released in the medium over time intervals at different inhibitor ratios against the control using Inductive Coupled Plasma Mass Spectrometry (ICP-MS), and the second was relative weight loss method. Meanwhile, the development of the adsorption layer of the inhibitor on the surface of the iron steel specimen was monitored qualitatively using scanning electron microscopy. The adsorption of the extract constituents was found to obey Langmuir adsorption isotherm. Bacterial growth inhibition was examined using a well-diffusion method. After three days, the percentage of corrosion inhibition in fresh and marine media was 95% and 91%, respectively at the ratio of 1.5 mg/mL of the crude extract, and a homogeneous adsorption layer was observed on the surface of the iron specimen. The same dose was enough to inhibit bacterial growth in both media. Natural ecofriendly inhibitor extracted from a wild native Egyptian plant was found to be anticorrosion and at the same time antibacterial in both fresh and marine water media.

Chain elongation in continuous microbial electrosynthesis cells: The effect of pH and precursors supply

Microbial electrosynthesis (MES) enables the production of carbon-neutral chemicals using CO2 as a carbon source. Acetic acid is the main MES product, but recent studies show the direct production of elongated carboxylic acids, e.g., butyric and caproic acid. However, the production of elongated acids in MES systems is still inefficient due to the low growth rates of acetogenic bacteria and to limited solventogenic rates. Subsequently, researchers have produced elongated carboxylic acids directly from acetic acid or have operated MES systems at low pH to favor solventogenesis. However, the effect the addition of different chain elongation precursors and the operation pH exerts in the bioelectrochemical production of elongated acids remains unclear. To investigate this, three pH-controlled MES systems were operated in this study with continuous liquid and gas supply. MES systems elongating acetic acid at pH 6 achieved higher butyric (0.71 vs. 0.42 g L−1) and caproic acid (0.71 vs. 0.42 g L−1) titers in the absence of CO2 sparging. Additionally, lowering the pH to 5 in the MES systems fed with CO2 and acetic acid improved the elongated acids titers, reaching 0.72 g L−1 butyric and 0.33 g L−1 caproic acid. The 16 S rRNA analysis showed the community was dominated by Oscillibacter at pH 6, and by Clostridium at pH 5. Furthermore, the first scanning electron microscopy pictures revealing biofilm stratification in MES cathodes were taken in this study, where homogeneous rod-shaped bacteria biofilm layers, in contact with the graphite cathode, were covered by heterogeneous biofilm layers.

Immobilization of human tyrosine hydroxylase onto magnetic nanoparticles – A novel formulation of a therapeutic enzyme

Human tyrosine hydroxylase (hTH) has key role in the production of catecholamine neurotransmitters. The structure, function and regulation of hTH has been extensively researched area and the possibility of enzyme replacement therapy (ERT) involving hTH through nanocarriers has been raised as well. However, our understanding on how hTH may interact with nanocarriers is still lacking. In this work, we attempted to investigate the immobilization of hTH on magnetic nanoparticles (MNPs) with various surface linkers in quantitative and mechanistic detail. Our results showed that the activity of hTH was retained after immobilization via secondary and covalent interactions as well. The colloidal stability of hTH could be also enhanced proved by Dynamic light scattering and Zeta potential analysis and a homogenous enzyme layer could be achieved, which was investigated by Raman mapping. The covalent attachment of hTH on MNPs via aldehyde or epoxy linkers provide irreversible immobilization and 38.1 % and 16.5 % recovery (ER). The hTH-MNPs catalyst had 25 % ER in average in simulated nasal electrolyte solution (SNES). This outcome highlights the relevance of immobilization applying MNPs as a potential formulation tool of sensitive therapeutic enzymes offering new opportunities for ERT related to neurodegenerative disorders.

The Relevance of Surface Resistances on the Conductive Thermal Resistance of Lightweight Steel-Framed Walls: A Numerical Simulation Study

The accurate evaluation of the thermal performance of building envelope components (e.g., facade walls) is crucial for the reliable evaluation of their energy efficiency. There are several methods available to quantify their thermal resistance, such as analytical formulations (e.g., ISO 6946 simplified calculation method), numerical simulations (e.g., using finite element method), experimental measurements under lab-controlled conditions or in situ. Regarding measurements, when using the heat flow meter (HFM) method, very often, the measured value is based on surface conditions (e.g., temperature and heat flux), achieving in this way the so-called surface-to-surface or conductive thermal resistance (Rcond). When the building components are made of homogeneous layers, their Rcond values are constant, regardless of their internal and external surface boundary conditions. However, whenever this element is composed of inhomogeneous layers, such as in lightweight steel-framed (LSF) walls, their Rcond values are no longer constant, depending on their thermal surface resistance. In the literature, such systematic research into how these Rcond values vary is not available. In this study, the values of four LSF walls were computed, with different levels of thermal conductivity inhomogeneity, making use of four finite elements’ numerical simulation tools. Six external thermal surface resistances (Rse) were modelled, ranging from 0.00 up to 0.20 m2·K/W. The average temperature of the partition LSF walls is 15 °C, while for the facade LSF walls it is 10 °C. It was found that the accuracy values of all evaluated numerical software are very high and similar, the Rcond values being nearly constant for walls with homogeneous layers, as expected. However, the variation in the Rcond value depends on the level of inhomogeneity in the LSF wall layers, increasing up to 8%, i.e., +0.123 m2·K/W, for the evaluated Rse values.

Development of microfiltration membranes based on polysulfone and polyetherimide blends.

In this study, membranes blended with polysulfone (PSU) and polyetherimide (PEI) polymers in different ratios were fabricated. Their potential to remove pollutants from rivers, which are a potential drinking water source, was investigated. Scanning electron microscopy analysis revealed that the PSU membranes had a dense and homogeneous layer, whereas the addition of PEI formed a spongy substrate. The water content of the fabricated membranes varied between 5.37 and 22.42%, porosities 28.73-89.36%, contact angles 69.18-85.81%, and average pure water fluxes 257.25-375.32 L/m2 h. The blended membranes removed turbidity, chloride, alkalinity, conductivity, sulfate, iron, manganese, and total organic carbon up to 98.32, 92.28, 96.87, 90.67, 99.58, 94.63, 97.48, and 79.11%, respectively. These results show that when PEI was added to the PSU polymer, the filtration efficiency increased owing to an increase in the hydrophilicity of the membranes. Blending these two polymers enabled the optimization of membrane properties such as permeability, selectivity, and mechanical strength. In addition, membrane fabrication processes are simple and incur low costs.

Creation of Organic/Inorganic Hybrids in Two‐Dimensional Organized Films Using Natural Materials and Control of Their Morphology

AbstractStarch, an insoluble natural polymer, can be spread into a Langmuir monolayer on the surface of water as amylodextrin by solubilization, where it forms a spherical single‐particle layer at the air–water interface. In this study, we fabricated a two‐dimensional mixed monolayer from soluble starch and organo‐modified montmorillonite and attempted to control its morphology by varying the mixing ratio. The behavior of the organo‐modified montmorillonite was dependent on the spreading solvent and miniaturization was possible using a suitable solvent for spreading insoluble starch. Although both materials formed phase‐separated systems, nearly homogeneous particle layers were formed in some cases because of clay miniaturization. However, X‐ray photoelectron spectroscopy showed that the clay components remained intact and a rectangular morphology derived from aluminosilicate was observed in the mixed film with a high clay ratio. Functionalization as a mixed film clearly demonstrated the hydrophilic properties imparted by the starch particles and the selective adsorption of biomolecules on the clay surface.

Understanding Interfaces in AlScN/GaN Heterostructures

AbstractAluminum scandium nitride barrier layers increase the available sheet charge carrier density in gallium nitride‐based high‐electron‐mobility transistors and boost the output power of high‐frequency amplifiers and high voltage switches. Growth of AlScN by metal‐organic chemical vapor deposition is challenging due to the low vapor pressure of the conventional Sc precursor Cp3Sc, which induces low growth rates of AlScN and leads to thermally‐induced AlScN/GaN‐interface degradation. In this work, novel Sc precursors are employed to reduce the thermal budget by increasing the growth rate of the AlScN layer. The AlScN/GaN interfaces are investigated by high‐resolution X‐ray diffraction, high‐resolution transmission electron microscopy, time‐of‐flight secondary ion mass spectrometry, capacitance–voltage, current–voltage and temperature‐dependent Hall measurements. Linearly graded interlayers with strain‐induced stacking faults, edge, and screw dislocations form at the AlScN/GaN interface at growth rates of 0.015 nms−1. Growth rates of 0.034 nms−1 and higher allow for abrupt interfaces, but a compositional grading in the barrier remains. Homogeneous barrier layers can be achieved at growth rates of 0.067 nms−1 or by growing an AlN interlayer. The electrical properties of the heterostructures are sensitive to Sc accumulations at the cap/barrier interface, residual impurities from precursor synthesis, and surface roughness. This study paves the way for high‐performing devices.

Analysis of laterally loaded floating piles using a refined Tajimi model

AbstractThis paper presents a novel mathematical model for the analysis of laterally loaded floating piles embedded in a homogeneous soil layer of finite thickness. The governing equations of the soil surrounding the pile are established by treating soil as a Tajimi‐type continuum, and their solution yields a closed‐form expression that provides the lateral force developing to resist pile deflection. Accordingly, analytical expressions are obtained for the swaying, swaying‐rocking and rocking pile head stiffness, as well as for pile displacement and rotation along its length. The derived expressions are functions of parameters that have direct physical meaning, such as pile and soil elastic stiffness. As such, they pose as an attractive alternative to numerical methods for the low‐cost calibration of Winkler‐based model empirical parameters associated with small pile deflections. The presentation concludes with a parametric study focused on exploring the sensitivity of pile stiffness and deformations to the main problem parameters, and on highlighting differences in the lateral response of floating and end‐bearing piles.

Rheological Investigation of Highly Filled Copper(II) Oxide Nanosuspensions to Optimize Precursor Particle Content in Reductive Laser-Sintering

In this article, the particle concentration of finely dispersed copper(II) oxide nanosuspensions as precursors for reductive laser sintering (RLS) is optimized on the basis of rheological investigations. For this metallization process, a smooth, homogeneous and defect-free precursor layer is a prerequisite for adherent and reproducible copper structures. The knowledge of the rheological properties of an ink is crucial for the selection of a suitable coating technology as well as for the adjustment of the ink formulation. Different dilutions of the nanosuspension were examined for their rheological behavior by recording flow curves. A strong shear thinning behavior was found and the viscosity decreases exponentially with increasing dilution. The viscoelastic behavior was investigated by a simulated doctor blade coating process using three-interval thixotropy tests. An overshoot in viscosity is observed, which decreases with increasing thinning of the precursor. As a comparison to these results, doctor blade coating of planar glass and polymer substrates was performed to prepare precursor layers for reductive laser sintering. Surface morphology measurements of the resulting coatings using laser scanning microscopy and rheological tests show that homogeneous precursor layers with constant thickness can be produced at a particle–solvent ratio of 1.33. A too-high particle content results in an irregular coating layer with deep grooves and a peak-to-valley height Sz of up to 7.8 μm. Precise dilution control allows the fabrication of smooth surfaces with a Sz down to 1.5 μm.

The migration pattern of cells during the mesoderm and endoderm differentiation from human pluripotent stem cells.

Gastrulation is the first major differentiation process in animal embryos. However, the dynamics of human gastrulation remain mostly unknown owing to the ethical limitations. We studied the dynamics of the mesoderm and endoderm cell differentiation from human pluripotent stem cells for insight into the cellular dynamics of human gastrulation. Human pluripotent stem cells have properties similar to those of the epiblast, which gives rise to the three germ layers. The mesoderm and endoderm were induced with more than 75% purity from human induced pluripotent stem cells. Single-cell dynamics of pluripotent stem cell-derived mesoderm and endoderm cells were traced using time-lapse imaging. Both mesoderm and endoderm cells migrate randomly, accompanied by short-term directional persistence. No substantial differences were detected between mesoderm and endoderm migration. Computer simulations created using the measured parameters revealed that random movement and external force, such as the spread out of cells from the primitive streak area, mimicked the homogeneous discoidal germ layer formation. These results were consistent with the development of amniotes, which suggests the effectiveness of human pluripotent stem cells as a good model for studying human embryogenesis.

How heating tracers drive self-lofting long-lived stratospheric anticyclones: simple dynamical models

Abstract. Long-lived “bubbles” of wildfire smoke or volcanic aerosol have recently been observed in the stratosphere, co-located with ozone, carbon monoxide, and water vapour anomalies. These bubbles often survive for several weeks, during which time they ascend through vertical distances of 15 km or more. Meteorological analysis data suggest that this aerosol is contained within strong, persistent anticyclonic vortices. Absorption of solar radiation by the aerosol is hypothesised to drive the ascent of the bubbles, but the dynamics of how this heating gives rise to a single-sign anticyclonic vorticity anomaly have thus far been unclear. We present a description of heating-driven stratospheric vortices, based on an axisymmetric balanced model. The simplest version of this model includes a specified localised heating moving upwards at fixed velocity and produces a steadily translating solution with a single-signed anticyclonic vortex co-located with the heating, with corresponding temperature anomalies forming a vertical dipole, matching observations. A more complex version includes the two-way interaction between a heating tracer, representing the aerosol, and the dynamics. An evolving tracer provides heating which drives a secondary circulation, and this in turn transports the tracer. Through this two-way interaction an initial distribution of tracer drives a circulation and forms a self-lofting tracer-filled anticyclonic vortex. Scaling arguments show that upward velocity is proportional to heating magnitude, but the magnitude of peak quasigeostrophic vorticity is O(f) (f is the Coriolis parameter) and independent of the heating magnitude. Estimates of vorticity from observations match our theoretical predictions. We discuss 3-D effects such as vortex stripping and dispersion of tracer outside the vortex by the large-scale flow, which cannot be captured explicitly by the axisymmetric model and are likely to be important in the real atmosphere. The large O(f) vorticity of the fully developed anticyclones explains their observed persistence and their effective confinement of tracers. To further investigate the early stages of formation of tracer-filled vortices, we consider an idealised configuration of a homogeneous tracer layer. A linearised calculation reveals that the upper part of the layer is destabilised due to the decrease in tracer concentrations with height there, which sets up a self-reinforcing effect where upward lofting of tracer results in stronger heating and hence stronger lofting. Small amplitude disturbances form isolated tracer plumes that ascend out of the initial layer, indicative of a self-organisation of the flow. The relevance of these idealised models to formation and persistence of tracer-filled vortices in the real atmosphere is discussed, and it is suggested that a key factor in their formation is the time taken to reach the fully developed stage, which is shorter for strong heating rates.

Development, Characterisation and Biocompatibility Analysis of a Collagen-Gelatin-Hydroxyapatite Scaffold for Guided Bone Regeneration

Guided Bone Regeneration (GBR) is the choice of treatment for improving the horizontal and vertical bone volume through bone grafting. GBR membranes work on the principle of preventing epithelial migration into the defect space while maintaining the space for cell migration and differentiation at the defect site. Hydroxyapatite has been commonly used as a bone graft for infrabony defects. The study was conducted at the Department of Biomaterials at Saveetha Dental College. GBR membrane was prepared and its material characterization was done using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDX) analysis, Fourier Transform Infrared Radiation (FTIR), and Confocal Analysis. The developed GBR membrane revealed SEM properties conducive to cell attachment. EDX and FTIR analysis showed the successful development of the collagen-gelatin-hydroxyapatite membrane. Cell culture and confocal analysis revealed excellent biocompatibility with a homogenous layer of viable cells. The developed composite GBR membrane is a biogenic membrane with relevant biomineralization potential that should be applied for GBR applications.

Bifurcation and asymptotics of cubically nonlinear transverse magnetic surface plasmon polaritons

Linear Maxwell equations for transverse magnetic (TM) polarized fields support single frequency surface plasmon polaritons (SPPs) localized at the interface of a metal and a dielectric. Metals are typically dispersive, i.e. the dielectric function depends on the frequency. We prove the bifurcation of localized SPPs in dispersive media in the presence of a cubic nonlinearity and provide an asymptotic expansion of the solution and the frequency. The problem is reduced to a system of nonlinear differential equations in one spatial dimension by assuming a plane wave dependence in the direction tangential to the (flat) interfaces. The number of interfaces is arbitrary and the nonlinear system is solved in a subspace of functions with the H1-Sobolev regularity in each material layer. The corresponding linear system is an operator pencil in the frequency parameter due to the material dispersion. The studied bifurcation occurs at a simple isolated eigenvalue of the pencil. For geometries consisting of two or three homogeneous layers we provide explicit conditions on the existence of eigenvalues and on their simpleness and isolatedness. Real frequencies are shown to exist in the nonlinear setting in the case of PT-symmetric materials. We also apply a finite difference numerical method to the nonlinear system and compute bifurcating curves.

Corrosion and carburization of Ni3Al‐based superalloys in high‐temperature carbon dioxide

AbstractTo investigate the application of Ni3Al‐based superalloys in gas turbine cycle systems, this experiment exposed Ni3Al‐based superalloys to a 600°C/5 MPa environment with 99.995% pure CO2 gas. The corrosion and carburization behaviors and mechanisms were investigated in detail. The results reveal that with prolonged thermal exposure, the surface oxides of the samples tend to develop a continuous and homogeneous transition state alumina layer. This layer serves as a protective barrier, preventing the penetration and corrosion of external carbon‐containing and oxygen‐containing substances into the matrix. A small amount of carbon‐containing hazardous substances still penetrates the oxide layer or grain boundaries through highly diffusive pathways such as nanochannels, pores, and cracks, because the transition state of alumina is not completely dense. This leads to carbon deposition at the interface between the oxide layer and the matrix, where a mixture of alumina and amorphous carbon is formed at the interface.

The Q4γs plate finite element for three-layer FGM sandwich plates in deflection, stresses, vibration, and thermal buckling analysis

This work adapts the Q4γs quadrilateral element to analyse three-layer FGM sandwich plates. Two types of FGM sandwich configurations are employed to assess the element performance in conducting static, free vibration, and thermal buckling analysis. The first configuration is a homogeneous core and FGM outer layers, while the second involves homogeneous top and bottom layers and an FGM core. Various problems have been run, and the results are compared with references to assess the accuracy of the element. Numerical results on the deflection, stresses, frequencies, and thermal buckling of symmetrical and non-symmetrical FGM sandwich plates are examined to evaluate the effectiveness of the current model. Furthermore, the influence of the power-law index and the length-to-thickness ratio on the analyses is also investigated.

Inhibition of the polymer grafted with dopamine derivatives on hydration and swelling of clay

Swelling of clay minerals is one of the main factors restricting the efficient exploration and development of shale oil and gas. To solve this issue, the free radical induction method was employed to synthesize a polymer grafted with dopamine derivatives, P(AM-DA). This study aimed to evaluate the inhibitory properties of P(AM-DA) on the hydration and swelling of clay and analyze its mechanism. Firstly, P(AM-DA) was characterized by FTIR, HNMR, and TGA. Subsequently, anti-swelling, anti-disintegration, and immersion tests were conducted to evaluate its inhibitory properties. Then, the inhibitory mechanism was further elucidated through Zeta potential tests, particle size analysis, XRD tests, and SEM analysis. Finally, the properties of P(AM-DA) on mud rheology and fluid loss were evaluated. The experimental results showed that the dopamine derivatives were successfully grafted onto the polymer's side chains. Additionally, the result of TGA demonstrated the polymer's good thermal stability below 200℃. P(AM-DA) showed a superior inhibitory effect, and the swelling rate of cores was much lower than that of KCl and polyetheramine. Despite the clay mineral content of shale cuttings being as high as 51.1 %, the anti-disintegration rate could be increased by 66.45 %. The Na-BT core retained its shape and structural integrity after 72-hours immersion, and it could support a weight of 200 g. Regarding the inhibitory mechanism, P(AM-DA) could adsorb onto the surface of clay particles through hydrogen bonding and electrostatic interaction, which reduced the dispersion of clay particles. The protonated amine groups could neutralize the electronegativity of the clay particles, reducing the electrostatic repulsion between the layers. Besides, P(AM-DA) exhibited a series of special behaviors, such as adsorption on the core surface to form a homogeneous layer and insertion into the crystal layer of clay. Both of these behaviors could decrease the passage of water molecules, and the intercalation behavior could also reduce and stabilize the interlayer spacing. In addition, P(AM-DA) could dramatically increase the viscosity of the fluid at higher concentrations and unexpectedly reduce fluid loss. In conclusion, P(AM-DA) showed considerable promise in inhibiting hydration and swelling of clay.