Due to the fact that hollow-core slabs without formwork are produced without slinging loops (features of manufacturing technology), the issue of installation and transportation of these slabs has been solved. A constructive and technological solution is proposed for a slinging unit, arranged in the body of the slab, without the use of a slinging loop, and having only an anchor rod-dowel through which it is possible to directly sling the slab without using traditional slinging loops. The unit is designed with a reduced metal consumption and does not change the technology for manufacturing hollow-core slabs without formwork. Found and summed up a theoretical basis for calculating the bearing capacity of the proposed slinging unit, arranged in a hollow-core slab without formwork. It was revealed that the bearing capacity of the proposed slinging assembly, arranged in the body of a hollow-core slab, under the action of assembly loads, depends on the force of splitting the concrete of the protective layer located above the anchor rod-dowel of this assembly (all other things being equal). The theoretical data of the study were verified by full-scale tests of plates with slinging units arranged in their body, carried out in accordance with the proposed constructive and technological development. A utility model patent was obtained for the development of a loopless slinging unit for a hollow-core slab without formwork.