Disk Hole Research Articles

Disc novae: thermodynamics of gas-assisted binary black hole formation in AGN discs

ABSTRACT We investigate the thermodynamics of close encounters between stellar mass black holes (BHs) in the gaseous discs of active galactic nuclei (AGNs), during which binary black holes (BBHs) may form. We consider a suite of 2D viscous hydrodynamical simulations within a shearing box prescription using the Eulerian grid code athena++. We study formation scenarios where the fluid is either an isothermal gas or an adiabatic mixture of gas and radiation in local thermal equilibrium. We include the effects of viscous and shock heating, as well as optically thick cooling. We co-evolve the embedded BHs with the gas, keeping track of the energetic dissipation and torquing of the BBH by gas and inertial forces. We find that compared to the isothermal case, the minidiscs formed around each BH are significantly hotter and more diffuse, though BBH formation is still efficient. We observe massive blast waves arising from collisions between the radiative minidiscs during both the initial close encounter and subsequent periapsis periods for successfully bound BBHs. These ‘disc novae’ have a profound effect, depleting the BBH Hill sphere of gas and injecting energy into the surrounding medium. In analysing the thermal emission from these events, we observe periodic peaks in local luminosity associated with close encounters/periapses, with emission peaking in the optical/near-infrared (IR). In the AGN outskirts, these outbursts can reach 4 per cent of the AGN luminosity in the IR band, with flares rising over 0.5–1 yr. Collisions in different disc regions, or when treated in 3D with magnetism, may produce more prominent flares.

Gas assisted binary black hole formation in AGN discs

ABSTRACT We investigate close encounters by stellar mass black holes (BHs) in the gaseous discs of active galactic nuclei (AGNs) as a potential formation channel of binary black holes (BBHs). We perform a series of 2D isothermal viscous hydrodynamical simulations within a shearing box prescription using the Eulerian grid code Athena++. We co-evolve the embedded BHs with the gas keeping track of the energetic dissipation and torquing of the BBH by gas gravitation and inertial forces. To probe the dependence of capture on the initial conditions, we discuss a suite of 345 simulations spanning BBH impact parameter (b) and local AGN disc density (ρ0). We identify a clear region in b − ρ0 space where gas assisted BBH capture is efficient. We find that the presence of gas leads to strong energetic dissipation during close encounters between unbound BHs, forming stably bound eccentric BBHs. We find that the gas dissipation during close encounters increases for systems with increased disc density and deeper periapsis passages rp, fitting a power law such that $\Delta E \propto \rho _0^{\alpha }r_{\mathrm{p}}^{\beta }$, where {α, β} = {1.01 ± 0.04, −0.43 ± 0.03}. Alternatively, the gas dissipation is approximately ΔE = 4.3MdvHvp, where Md is the mass of a single BH minidisc just prior to the encounter when the binary separation is 2rH (two binary Hill radii), vH and vp are the relative BH velocities at 2rH and at the first closest approach, respectively. We derive a prescription for capture which can be used in semi-analytical models of AGN. We do not find the dissipative dynamics observed in these systems to be in agreement with the simple gas dynamical friction models often used in the literature.

High-resolution spectroscopy of the intermediate polar EX Hydrae

EX Hya is one of the best studied, but still enigmatic intermediate polars. We present phase-resolved blue VLT/UVES high-resolution (λ/Δλ ≃ 16.000) spectra of EX Hya taken in January 2004. Our analysis involves a unique decomposition of the Balmer line profiles into the spin-modulated line wings that represent streaming motions in the magnetosphere and the orbital-phase modulated line core that represents the accretion disk. Spectral analysis and tomography show that the division line between the two is solidly located at ∣υrad ∣ ≃ 1200 km s−1, defining the inner edge of the accretion disk at rin ≃ 7 × 109 cm or ∼10R1 (WD radii). This large central hole allows an unimpeded view of the tall accretion curtain at the lower pole with a shock height up to hsh ∼ 1R1 that is required by X-ray and optical observations. Our results contradict models that advocate a small magnetosphere and a small inner disk hole. Equating rin with the magnetospheric radius in the orbital plane allows us to derive a magnetic moment of the WD of μ1 ≃ 1.3 × 1032 G cm3 and a surface field strength B1 ∼ 0.35 MG. Given a polar field strength Bp ≲ 1.0 MG, optical circular polarization is not expected. With an accretion rate Ṁ = 3.9 × 10−11 M⊙ yr−1, the accretion torque is Gacc ≃ 2.2 × 1033 g cm2 s−2. The magnetostatic torque is of similar magnitude, suggesting that EX Hya is not far from being synchronized. We measured the orbital radial-velocity amplitude of the WD, K1 = 58.7 ± 3.9 km s−1, and found a spin-dependent velocity modulation as well. The former is in perfect agreement with the mean velocity amplitude obtained by other researchers, confirming the published component masses M1 ≃ 0.79 M⊙ and M2 ≃ 0.11 M⊙.

Constraining the LVK AGN channel with black hole spins

ABSTRACT Merging black holes (BHs) are expected to produce remnants with large dimensionless spin parameters (aspin ∼ 0.7). However, gravitational wave (GW) observations with LIGO–Virgo–Kagra (LVK) suggest that merging BHs are consistent with modestly positive but not high spin (aspin ∼ 0.2), causing tension with models suggesting that high-mass mergers are produced by hierarchical merger channels. Some BHs also show evidence for strong in-plane spin components. Here, we point out that spin-down of BHs due to eccentric prograde post-merger orbits within the gas of an active galactic nucleus (AGN) disc can yield BHs with masses in the upper mass gap, but only modestly positive aspin, and thus observations of BHs with low spin do not rule out hierarchical models. We also point out that the fraction of binary black hole (BBH) mergers with significant in-plane spin components is a strong test of interactions between disc BBHs and nuclear spheroid orbiters. Spin magnitude and spin tilt constraints from LVK observations of BBHs are an excellent test of dynamics of BHs in AGN discs, disc properties, and the nuclear clusters interacting with AGNs.

Black Hole–Disk Interactions in Magnetically Arrested Active Galactic Nuclei: General Relativistic Magnetohydrodynamic Simulations Using a Time-dependent, Binary Metric

Perturber objects interacting with supermassive black hole accretion disks are often invoked to explain observed quasiperiodic behavior in active galactic nuclei (AGN). We present global, 3D general relativistic magnetohydrodynamic (GRMHD) simulations of black holes on inclined orbits colliding with magnetically arrested thick AGN disks using a binary black hole spacetime with mass ratio 0.1. We do this by implementing an approximate time-dependent binary black hole metric into the GRMHD Athena++ code. The secondary enhances the unbound mass outflow rate 2–4 times above that provided by the disk in quasiperiodic outbursts, eventually merging into a more continuous outflow at larger distances. We present a simple analytic model that qualitatively agrees well with this result and can be used to extrapolate to unexplored regions of parameter space. We show self-consistently for the first time that spin–orbit coupling between the primary black hole spin and the binary orbital angular momentum causes the accretion disk and jet directions to precess significantly (by 60°–80°) on long timescales (e.g., ∼20 times the binary orbital period). Because this effect may be the only way for thick AGN disks to consistently precess, it could provide strong evidence of a secondary black hole companion if observed in such a system. Besides this new phenomenology, the time-average properties of the disk and accretion rates onto the primary are only marginally altered by the presence of the secondary, consistent with our estimate for a perturbed thick disk. This situation might drastically change in cooled thin disks.

Comparison of magnetized thick disks around black holes and boson stars

Boson stars are considered as promising candidates for black hole mimickers. Similar to other compact objects they can form accretion disks around them. The properties of these disks could possibly distinguish them from other compact objects like black holes in future observations. Retrograde thick disks around boson stars and the influence of strong magnetic fields on them were already studied and it was shown that they can harbor very distinct features compared to black hole disks. However, the case of prograde thick disks is mostly unexplored, since they may appear much more similar to black hole disks. In this work we will investigate similarities and differences regarding prograde thick disks around non-selfinteracting rotating boson stars and rotating black holes. We assume thereby a polytropic equation of state and a constant specific angular momentum distribution of the disks. We classify the various conceivable boson star and black hole solutions by a dimensionless spin parameter a and compare their corresponding disk solutions. The influence of toroidal magnetic fields on the disks is analyzed by selected disk properties, as the rest-mass density distribution and the Bernoulli parameter. Disk solutions are characterized by their degree of magnetization represented by the magnetization parameter βmc\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\beta _{mc}$$\\end{document}. We found that strong magnetic fields can strengthen the differences of disk solutions or oppositely even lead to a correlation in disk properties, depending on the spin parameter of the boson star and black hole solutions. We identify the vertical thickness of the boson star disks as the main differentiating factor, since for most solutions the vertical density distribution is far more outreaching for boson star disks compared to black hole disks.

Gravitational wave mergers of accreting binary black holes in AGN discs

ABSTRACT Binary black hole (BBH) evolution in the discs of active galactic nuclei (AGNs) is a promising channel for gravitational wave (GW)-driven mergers. It is, however, unclear whether binaries interacting with the surrounding disc undergo orbital contraction or expansion. We develop a simple analytical model of accreting BBHs in AGN discs to follow the orbital evolution from the disc-dominated regime at large separations into the GW-driven regime at small separations (the coupled ‘disc + GW’-driven evolution). We obtain that accreting binaries expand in thick discs with aspect ratio greater than a critical value (>hcrit); whereas accreting binaries contract and eventually merge in thin discs (<hcrit). Interestingly, accreting BBHs can experience faster mergers compared to non-accreting counterparts, with a non-monotonic dependence on the disc aspect ratio. The orbital contraction is usually coupled with eccentricity growth in the disc-dominated regime, which lead to accelerated inspirals in the GW-driven regime. We quantify the resulting BBH merger time-scales in AGN discs (τmerger ∼ 105–107 yr) and estimate the associated GW merger rates ($\mathcal {R} \sim (0.2 {\small --} 5) \, \text{Gpc}^{-3} \text{yr}^{-1}$). Overall, accreting binaries may efficiently contract and merge in thin discs, hence this particular BBH-in-AGN channel may provide a non-negligible contribution to the observed GW merger event rate.

Stellar/BH population in AGN discs: direct binary formation from capture objects in nuclei clusters

ABSTRACT The active galactic nucleus (AGN) disc has been proposed as a potential channel for the merger of binary black holes. The population of massive stars and black holes in AGN discs captured from the nuclei cluster plays a crucial role in determining the efficiency of binary formation and final merger rate within the AGN discs. In this paper, we investigate the capture process using analytical and numerical approaches. We discover a new constant integral of motion for one object’s capture process. Applying this result to the whole population of the nuclei cluster captured by the AGN disc, we find that the population of captured objects depends on the angular density and eccentricity distribution of the nuclei clusters and is effectively independent of the radial density profile of the nuclei cluster and disc models. An isotropic nuclei cluster with thermal eccentricity distribution predicts a captured profile dN/dr ∝ r−1/4. The captured objects are found to be dynamically crowded within the disc. Direct binary formation right after the capture would be promising, especially for stars. The conventional migration traps that help pile up single objects in AGN discs for black hole mergers might not be required.

Radio Jet Feedback on the Inner Disk of Virgo Spiral Galaxy Messier 58

Spitzer spectral maps reveal a disk of highly luminous, warm (>150 K) H2 in the center of the massive spiral galaxy Messier 58, which hosts a radio-loud active galactic nucleus (AGN). The inner 2.6 kpc of the galaxy appears to be overrun by shocks from the radio jet cocoon. Gemini NIRI imaging of the H2 1–0 S(1) emission line, Atacama Large Millimeter/submillimeter Array CO 2–1, and Hubble Space Telescope multiband imagery indicate that much of the molecular gas is shocked in situ, corresponding to lanes of dusty molecular gas that spiral toward the galactic nucleus. The CO 2–1 and ionized gas kinematics are highly disturbed, with velocity dispersion up to 300 km s−1. Dissipation of the associated kinetic energy and turbulence, likely injected into the interstellar medium by radio-jet-driven outflows, may power the observed molecular and ionized gas emission from the inner disk. The polycyclic aromatic hydrocarbon (PAH) fraction and composition in the inner disk appear to be normal, in spite of the jet and AGN activity. The PAH ratios are consistent with excitation by the interstellar radiation field from old stars in the bulge, with no contribution from star formation. The phenomenon of jet-shocked H2 may substantially reduce star formation and help to regulate the stellar mass of the inner disk and supermassive black hole in this otherwise normal spiral galaxy. Similarly strong H2 emission is found at the centers of several nearby spiral and lenticular galaxies with massive bulges and radio-loud AGNs.

Fracture analysis of Brazilian circular hole disk under mixed mode loading

The paper presents an investigation into a Brazilian disk specimen featuring a concentric circular hole, accompanied by two internal edge radial cracks. By introducing rotations of the cracks relative to the vertical axis, a combination of fracture modes I and II is induced. Employing the finite element method, we compute stress intensity factors related to fracture modes I and II, alongside T-stresses, while varying geometric parameters such as inner and outer diameters, crack length-to-ring width ratio, and crack inclination angle. Experimental analyses of ebonite's fracture toughness in the mixed mode are conducted, subjecting samples to static loading until complete failure. Each test provides the angle at which crack initiation occurs and the corresponding critical load. Three distinct fracture criteria - the generalized maximum tangential stress criterion (GMTS), extended maximum tangential strain criterion (EMTSN), and generalized strain energy density (GSED) criterion - are employed to predict fracture direction and critical load. The outcomes exhibit good correspondence between experimental critical loads and theoretical predictions.

Revisiting the black hole mass of M 87 using VLT/MUSE adaptive optics integral field unit data

Context. Stellar dynamic-based black hole mass measurements of M 87 are twice that determined via ionized gas kinematics; the former are closer to the mass estimated from the diameter of the gravitationally lensed ring around the black hole. Aims. Using a deeper and more comprehensive ionized gas kinematic data set, we aim to better constrain the complex morphology and kinematics of the nuclear ionized gas and thus gain insights into the reasons behind the disagreement between the mass measurements. Methods. We use new narrow field mode with adaptive optics and wide field mode integral field spectroscopic data from the Multi Unit Spectroscopic Explorer instrument on the Very Large Telescope to model the morphology and kinematics of multiple ionized gas emission lines (primarily Hα+[N II] λλ6548,6583 and [O I] λ6300) in the nucleus of M 87. We used Kinemetry to fit the position angle, inclination, and velocities of the subarcsecond ionized gas disk. We used KinMSpy to create simulated datacubes across a range of black hole masses and disk inclinations, and parameterized the differences of the resulting residual (observed minus simulated) velocity maps, in order to obtain the best-fit model. Results. The new deep data set reveals complexities in the nuclear ionized gas kinematics that were not seen in earlier sparse and shallower Hubble Space Telescope spectroscopy. Several ionized gas filaments, some with high flow velocities, can be traced down into the projected sphere of influence. However, not all truly pass close to the black hole. Additionally, we find evidence of a partially filled biconical outflow, aligned with the jet, with radial velocities of up to 400 km s−1. The subarcsecond rotating ionized gas “disk” is well resolved in our datacubes. The velocity isophotes of this disk are twisted, and the position angle of the innermost gas disk (≲5 pc) tends toward a value perpendicular to the radio jet axis. The complexity of the nuclear morphology and kinematics (the mix of a warped disk with spiral arms, large linewidths, strong outflows, and filaments crossing the black hole in projection) precludes the measurement of an accurate black hole mass from the ionized gas kinematics. Two results, each relatively weak but together more convincing, support a high-mass black hole (∼6.0 × 109 M⊙) in a low-inclination disk (i ∼ 25°) rather than a low-mass black hole (∼3.5 × 109 M⊙) in a i = 42° disk: (a) Kinemetry fits to the subarcsecond disk support inclinations of ∼20°–25° rather than 42°; and (b) velocity residual (observed minus simulated) maps with slightly smaller residuals are found for the former case. The specific (sub-Keplerian) radiatively inefficient accretion flow (RIAF) model previously proposed to reconcile the mass measurement discrepancy was also tested: the sub-Keplerian factor used in this model is not sufficiently small to make a high-mass black hole in a RIAF inflow masquerade as a low-mass black hole in a Keplerian inflow. In general, Keplerian disk models perform significantly better than the RIAF model when fitting the subarcsecond ionized gas disk. Conclusions. A disk inclination close to 25° for the nuclear gas disk (rather than the previously posited 42°) and the warp in the subarcsecond ionized gas disk help reconcile the contradictory nature of key earlier results: (a) the mass discrepancy between stellar and ionized gas black hole masses (our results support the former) and (b) the misorientation between the axes of the ionized gas disk and the jet (we find them to be aligned in both two and three dimensions). Furthermore, we identify a previously unknown 400 km s−1 (partially filled) biconical outflow along the (three-dimensional) jet axis and show that the velocities of the two largest ionized gas filaments at 8″–30″ nuclear distances can be explained primarily by rotation in the extension of the nuclear ionized gas disk (inclination ∼25°).

EMRI + TDE = QPE: Periodic X-Ray Flares from Star–Disk Collisions in Galactic Nuclei

Roughly half of the quasiperiodic eruption (QPE) sources in galactic nuclei exhibit a remarkably regular alternating “long-short” pattern of recurrence times between consecutive flares. We show that a main-sequence star (brought into the nucleus as an extreme mass-ratio inspiral; EMRI) that passes twice per orbit through the accretion disk of the supermassive black hole (SMBH) on a mildly eccentric inclined orbit, each time shocking and ejecting optically thick gas clouds above and below the midplane, naturally reproduces observed properties of QPE flares. Inefficient photon production in the ejecta renders the QPE emission much harder than the blackbody temperature, enabling the flares to stick out from the softer quiescent disk spectrum. Destruction of the star via mass ablation limits the QPE lifetime to decades, precluding a long-lived AGN as the gaseous disk. By contrast, a tidal disruption event (TDE) naturally provides a transient gaseous disk on the requisite radial scale, with a rate exceeding the EMRI inward migration rate, suggesting that many TDEs should host a QPE. This picture is consistent with the X-ray TDE observed several years prior to the QPE appearance from GSN 069. Remarkably, a second TDE-like flare was observed from this event, starting immediately after detectable QPE activity ceased; this event could plausibly result from the (partial or complete) destruction of the QPE-generating star triggered by runaway mass loss, though other explanations cannot be excluded. Our model can also be applied to black hole–disk collisions, such as those invoked in the context of the candidate SMBH binary OJ 287.

Impact of the Accretion Disk Thickness on the Polarization of the Thermal Emission from Stellar Mass Black Holes

The Imaging X-ray Polarimetry Explorer, launched in 2021 December, enables precision measurements of the energy-dependent polarization of the X-ray emission from stellar mass and supermassive black holes. In this paper, we study the impact of the accretion disk geometry on the polarization of the thermal emission of mass-accreting stellar-mass black holes. We present a ray-tracing code that allows us to predict how the X-ray polarization energy spectra change as we dial up the thickness of the accretion disk from a geometrically thin accretion disk to a torus-shaped geometrically thick accretion disk. The results show that thicker disks can produce higher polarization degrees as the thick disk geometries lead to a larger fraction of X-rays reflecting off portions of the disk. We study the observational degeneracies between the disk shape on the one hand and the black hole spin and disk inclination on the other hand. We conclude with a discussion of the implications of our studies for black hole spin measurements.

Probing AGN with spectropolarimetry: accretion disc and SMBH parameters

ABSTRACT The interaction of a supermassive black hole with the matter of an accretion disc in the presence of a magnetic field is the key mechanism of energy release in active galactic nuclei. However, determining the physical parameters of this system, such as the spin and mass of the black hole, the shape and parameters of the rotation of the accretion disc, and the geometry of the magnetic field in the accretion disc is a complex and not completely solved problem. We have previously shown, based on our numerical models, that these estimates can be obtained from just three parameters: the black hole mass, bolometric luminosity, and optical polarization. In this paper, we estimate the accretion disc and black hole parameters for a sample of 14 type 1 Seyfert galaxies. Using the spectropolarimetric data obtained by us, we selected only those objects in which the polarization of optical radiation is generated mainly by the mechanism in the accretion disc. Despite the small statistics, our results for such a sample are consistent with our previous conclusions and show a discrepancy between the disc magnetic field parameters and the classical Shakura–Sunyaev disc model.

High-energy Electromagnetic, Neutrino, and Cosmic-Ray Emission by Stellar-mass Black Holes in Disks of Active Galactic Nuclei

Some Seyfert galaxies are detected in high-energy gamma rays, but the mechanism and site of gamma-ray emission are unknown. Also, the origins of the cosmic high-energy neutrino and MeV gamma-ray backgrounds have been veiled in mystery since their discoveries. We propose emission from stellar-mass BHs (sBHs) embedded in disks of active galactic nuclei as their possible sources. These sBHs are predicted to launch jets due to the Blandford–Znajek mechanism, which can produce intense electromagnetic, neutrino, and cosmic-ray emissions. We investigate whether these emissions can be the sources of cosmic high-energy particles. We find that emission from internal shocks in the jets can explain gamma rays from nearby radio-quiet Seyfert galaxies including NGC 1068, if the Lorentz factor of the jets (Γj) is high. On the other hand, for moderate Γj, the emission can significantly contribute to the background gamma-ray and neutrino intensities in the ~MeV and ≲PeV bands, respectively. Furthermore, for moderate Γj with efficient amplification of the magnetic field and cosmic-ray acceleration, the neutrino emission from NGC 1068 and the ultrahigh-energy cosmic rays can be explained. These results suggest that the neutrino flux from NGC 1068 as well as the background intensities of MeV gamma rays, neutrinos, and the ultrahigh-energy cosmic rays can be explained by a unified model. Future MeV gamma-ray satellites will test our scenario for neutrino emission.

Circumbinary Accretion: From Binary Stars to Massive Binary Black Holes

We review recent works on the dynamics of circumbinary accretion, including time variability, angular momentum transfer between the disk and the binary, and the secular evolution of accreting binaries. These dynamics impact stellar binary formation/evolution, circumbinary planet formation/migration, and the evolution of (super)massive black hole binaries. We discuss the dynamics and evolution of inclined/warped circumbinary disks and connect with observations of protoplanetary disks. A special kind of circumbinary accretion involves binaries embedded in big disks, which may contribute to the mergers of stellar-mass black holes in AGN disks. Highlights include the following: ▪Circumbinary accretion is highly variable, being modulated at P b (the binary period) or ∼5P b, depending on the binary eccentricity e b and mass ratio q b.▪The inner region of the circumbinary disk can develop coherent eccentric structure, which may modulate the accretion and affect the physical processes (e.g., planet migration) taking place in the disk.▪Over long timescales, circumbinary accretion steers binaries toward equal masses, and it does not always lead to binary orbital decay. The secular orbital evolution depends on the binary parameters (e b and q b) and on the thermodynamic properties of the accreting gas.▪A misaligned disk around a low-eccentricity binary tends to evolve toward coplanarity due to viscous dissipation. But when e b is significant, the disk can evolve toward “polar alignment,” with the disk plane perpendicular to the binary plane.

Structural Design and Simulation Analysis of a Dual-Row Pneumatic Vegetable Precision Planter

In order to solve the problems of domestic and foreign vegetable precision metering devices that easily damage seeds and have low seeding efficiency and poor qualification rate, this paper designs a one-machine for two-row pneumatic combination seeder, which is mainly composed of a pneumatic seeding mechanism and a honeycomb seeding mechanism. The mechanism and other components and theoretical analysis of the working process of the combined seed metering device clarifies the minimum negative pressure for adsorbing a seed during the suction stage, along with the negative pressure required for the seed-carrying stage. It also establishes the seeding speed and movement during planting with the trajectory parameter equation and uses ADAMS software to conduct virtual experiments on the influence of the number of holes, diameters, and heights of different types of honeycomb seeding disks on the success rate of seeding. Based on research on previous pneumatic seeding mechanisms, single factor tests, orthogonal tests, and high-speed photography tests of the honeycomb seeding disk of the combined seeder were carried out on the number of holes, the diameter of holes, and the height of seeding. The results of tests conducted on okra seeds showed that when the rotating speed of the pneumatic seeding disc was 18 r/min, the diameter of the pneumatic seeding disc hole was 2.4 mm, the vacuum degree was 3.5 kPa, the number of honeycomb seeding disc holes was 24, the hole diameter was 13 mm, and the seed height was 60 mm, the working performance of the combined seed meter reached the optimal level, which provides a reference for the development of a small seed vegetable precision seeder.

General relativistic simulations of collapsing binary neutron star mergers with Monte Carlo neutrino transport

Recent gravitational wave observations of neutron-star-neutron-star and neutron-star-black-hole binaries appear to indicate that massive neutron stars may not be too uncommon in merging systems. These discoveries have led to an increased interest in the simulation of merging compact binaries involving massive stars. In this paper, we present a first set of evolution of massive neutron star binaries using Monte Carlo radiation transport for the evolution of neutrinos. We study a range of systems, from nearly symmetric binaries that collapse to a black hole before forming a disk or ejecting material, to more asymmetric binaries in which tidal disruption of the lower mass star leads to the production of more interesting postmerger remnants. For the latter type of systems, we additionally study the impact of viscosity on the properties of the outflows, and compare our results to two recent simulations of identical binaries performed with the whiskythc code. We find agreement on the black hole properties, disk mass, and mass and velocity of the outflows within expected numerical uncertainties, and some minor but noticeable differences in the evolution of the electron fraction when using a subgrid viscosity model, with viscosity playing a more minor role in our simulations. The method used to account for r-process heating in the determination of the outflow properties appears to have a larger impact on our result than those differences between numerical codes. We also use the simulation with the most ejected material to verify that our newly implemented Lagrangian tracers provide a reasonable sampling of the matter outflows as they leave the computational grid. We note that, given the lack of production of hot outflows in these mergers, the main role of neutrinos in these systems is to set the composition of the postmerger remnant. One of the main potential uses of our simulations is, thus, as improved initial conditions for longer evolutions of such remnants.

Numerical investigation of film forming characteristics and mass transfer enhancement in horizontal polycondensation kettle

The process of producing high viscosity polyester by transesterification polycondensation needs to adjust the operating conditions and equipment structure of pre-polycondensation kettle and final polycondensation kettle to realize process intensification. In view of this, the fluid volume function method of computational fluid dynamics numerical simulation was used to investigate the film formation and surface renewal characteristics of horizontal polycondensation kettle under different operating conditions, including viscosity, rotating speed and liquid height. The results show that the viscosity and rotating speed were positively correlated with the film area and surface renewal in the pre-polycondensation stage. However, increasing the viscosity by several orders of magnitude in the final polycondensation kettle, the larger the film area and film thickness, but the overall surface renewal of the disk decreased. Therefore, a hexagonal hole disk is designed. By comparison, it is found that the film is more uniform, the surface update frequency is higher, and the power consumption can be reduced by more than 20%.

Algorithms and radiation dynamics for the vicinity of black holes

We present the results of our studies on accretion disks in the proximity of astrophysical black holes. These disks can be of varying degrees of opacity, geometrical shapes, sizes, and volumes. The central compact object is a Schwarzschild or a Kerr black hole of various spin parameters. We describe the environment and the physics of the systems under examination and the disk models considered. We first investigate the effects of the spacetime rotation on photon trajectories. We then examine the radiation forces recorded at various points of the arrangement inside and outside the disk material, and in the inner, outer, and off-equatorial material orbits. We document and explore the radiation effects, which are revealed to be significant and positively consequential. Afterward, we inspect the possible imaging outcome of various types of black hole and accretion disk configurations, and we show our results for plots that could be used to estimate the central black hole spin in a system. Finally, we show results regarding the disk material orbit degradation due to its thermal radiation.