Higher Values Research Articles

Effect of Herbal Kunapajala and Different Organic Manures on Plant Growth, Quality and Yield of Withania Somnifera L. Dunal

Abstract: Cultivation of medicinal plants, especially high value medicinal plants is creating new dimension in the field of agriculture. The need for developing countries to acquire technologies and techniques for programmed cultivation of medicinal plants is a current issue. Ashwagandha, the 3rd important prioritized medicinal plant listed by National Medicinal Plant Board (NMPB) is also known as Indian Ginseng. Herbal medicines strongly involve mass appeal being safer and inexpensive. The traditional use of ‘Ashwagandha was to increase energy, youthful vigour, endurance, strength, health, nurture the time elements of the body, increase vital fluids, muscle fat, blood, lymph, semen and cell production. The total alkaloid content in the roots of the Indian types has been reported to vary between 0.13 and 0.31%, though much higher yields (upto to 4.3%) have been recorded elsewhere. In all, 13 components have been obtained chromatographically. Herbal kunapajala can be used as nutrient supplement at any growth stage of crop plant. The effectiveness of herbal kunapajala is due to the breakdown of complex compounds in to lower molecular weight compounds during the fermentation of ingredients and this make available nutrients to the plants. So, this study is planned to evaluate the effect of herbal kunapajala and organic manure on ashwagandha.

Physicochemical attributes and bacteriome diversity of Lake Tunari, Taraba State, Nigeria

Physicochemical parameters of aquatic habitats can play an influential part in shaping the microbial communities of water bodies. In this study, water samples from Lake Tunari were analysed for its microbiome and physicochemical attributes, using spectrophotometric and culture-dependent methodologies respectively. The temperature of the lake ranged from 28.00 – 29.00 (°C), while the pH ranged from 6.50 – 7.20. Heavy metals such as Manganese (0.48 ppm), Lead (0.14 ppm) and Selenium (0.10 ppm) showed significantly high values in selected parts of the lake, surpassing limits set by the World Health Organisation. Microbiome analysis revealed the largest phylum across sample sites as Proteobacteria, Firmicutes, and Planctomycetota with peak relative abundance values of 64.13%, 45.29% and 16.11% respectively. Bacterial genera such as Exiguobacterium, Methylocystis and Rhodoferax were detected from designated sites. The presence of these genera capable of tolerating, utilizing or degrading metal ions in water samples of the Lake might be indicative of chemical and metal trickles into the water body. In addition, relatively new and understudied bacterial phyla such as Gemmatimonadota, as well as unknown bacterial clades were identified from water samples of the lake. This study has revealed that Lake Tunari is not impervious to pollution, caused by either anthropogenic activities or from adjoining water channels. Environmental health awareness programs can be introduced to enlighten the populace, while scheduled microbial and physicochemical surveillance can be adopted, to control microbial contamination and curtail toxic material inflow into the Lake.

Arterial oxygen pressure during veno-venous extracorporeal membrane oxygenation may be increased by advancing the tip of the drainage cannula into the superior vena cava: a case report.

A simple and robust method for veno-venous extracorporeal membrane oxygenation (V-V ECMO) involves a drainage cannula into the inferior vena cava via the femoral vein (FV) and a reinfusion cannula into the right atrium (RA) via the internal jugular vein (IJV) (F-J configuration). However, with this method, the arterial oxygen (PaO2) is said to remain below 100mmHg.Since recently, in our ICU, to prevent drainage failure, we apply a modification from the commonly practiced F-J configuration by advancing the tip of the drainage cannula inserted via the FV into the superior vena cava (SVC) and crossing the reinfusion cannula inserted via the IJV in the RA (F(SVC)-J(RA) configuration). We experienced that this modification can be associated with unexpectedly high PaO2 values, which here we investigated in detail.Veno-arteriovenous ECMO was induced in a 65-year-old male patient who suffered from repeated cardiac arrest due to acute respiratory distress syndrome. His chest X-ray images showed white-out after lung rest setting, consistent with near-absence of self-lung ventilation. Cardiac function recovered and the system was converted to F(SVC)-J(RA) configuration, after which both PaO2 and partial pressure of pulmonary arterial oxygen values remained high above 200mmHg. Transesophageal echocardiography could not detect right-to-left shunt, and more efficient drainage of the native venous return flow compared to common F-J configuration may explain the increased PaO2.Although the F(SVC)-J(RA) configuration is a small modification of the F-J configuration, it seems to provide a revolutionary improvement in the ECMO field by combining robustness/simplicity with high PaO2 values.

Item performance of the scale for the assessment and rating of ataxia in rare and ultra-rare genetic ataxias.

The Scale for the Assessment and Rating of Ataxia (SARA) is widely used for assessing the severity and progression of genetic cerebellar ataxias. SARA is now considered a primary end point in several ataxia treatment trials, but its underlying composite item measurement model has not yet been tested. This work aimed to evaluate the composite properties of SARA and its items using item response theory (IRT) and to demonstrate its applicability across even ultra-rare genetic ataxias. Leveraging SARA subscores data from 1932 visits from 990 patients of the Autosomal Recessive Cerebellar Ataxias (ARCA) registry, we assessed the performance of SARA using IRT methodology. The item characteristics were evaluated over the ataxia severity range of the entire ataxia population as well as the assessment validity across 115 genetic ARCA subpopulations. A unidimensional IRT model was able to describe SARA item data, indicating that SARA captures one single latent variable. All items had high discrimination values (1.5-2.9) indicating the effectiveness of the SARA in differentiating between subjects with different disease statuses. Each item contributed between 7% and 28% of the total assessment informativeness. There was no evidence for differences between the 115 genetic ARCA subpopulations in SARA applicability. These results show the good discrimination ability of SARA with all of its items adding informational value. The IRT framework provides a thorough description of SARA on the item level, and facilitates its utilization as a clinical outcome assessment in upcoming longitudinal natural history or treatment trials, across a large number of ataxias, including ultra-rare ones.

Inadequacy of Meals Served and Food Waste in a Portuguese University Canteen

This study aims to evaluate food waste and the adequacy of portions served in a Portuguese university canteen. The sample included 10278 meals. Portions served and food waste (plate waste and leftovers) were measured through physical weighing. Portion inadequacy was determined, considering the Dietary Reference Values proposed by the European Food Safety Authority. The portions of all meal components served were inadequate. Meat, fish, salads and vegetables were those in the most inadequate portions (p < 0.001), with the quantities of meat and fish served being well above the recommended level (+77%) and the quantities of salad and vegetables below the recommended level (−37.7%). During the study period, 1253.6 kg of food was wasted, representing a daily average of 65.9 kg of food waste (20.8%). It was estimated that 126.6 g of food was wasted per consumer per day. Salads and vegetables represented the food category with high food waste values (41.4%), mainly from plate waste (29.6%). Our findings show an inadequacy in terms of the portions served for all meal components. High food waste values were found, for vegetable soup, vegetables, salads and fruit; these were the items most rejected by consumers, compromising the achievement of nutritional goals for the lunches served in the university canteen.

Pelatihan dan Pendampingan Pembuatan Briket Batok Kelapa yang Ramah Lingkungan dalam Rangka Pengembangan Ekonomi Kreatif di Kelurahan Samaenre

This community service aims to develop the creative economy in Samaenre Village through the use of organic waste in the form of coconut shells. The problem found was the large amount of coconut shell waste and the lack of knowledge and skills of the community in utilizing the waste into goods of high economic value. The choice of this topic is based on the importance of supporting economic growth through utilizing local resource potential. The results of this activity show that providing training and assistance in making coconut shell briquettes is able to increase public awareness about the potential of local resources, create new business ideas or business opportunities in that place, and can preserve the environment. In conclusion, this community service highlights the importance of exploring your potential and taking advantage of existing opportunities. By strengthening the understanding of awareness regarding utilization concerns in the surrounding environment, we will be able to advance the wheels of the local economy.

Monitoring of Low Chl-a Concentration in Hulun Lake Based on Fusion of Remote Sensing Satellite and Ground Observation Data

China’s northern Hulun Lake is a significant body of water internationally. The issue of eutrophication has gained prominence in recent years. The achievement of precise chlorophyll-a (Chl-a) monitoring is crucial for safeguarding Hulun Lake’s ecosystem. The machine learning-based remote sensing inversion method has been shown to be effective in capturing the intricate relationship between independent and dependent variables; however, it lacks a priori knowledge and is limited by the quality of remote sensing data sources. The relationship between independent and dependent variables can be more accurately simulated with the use of suitable auxiliary variables. Therefore, three machine learning models—random forest (RF), adaptive boosting (AdaBoost), and extreme gradient boosting (XGBoost)—were established in this study using meteorological observation parameters as auxiliary variables combined with Sentinel-2 satellite image remote sensing band combinations as independent variables and measured Chl-a data as dependent variables. The estimation effects before and after the fusion of meteorological ground observation data were compared, and the best model was used to estimate the spatial–temporal variation trend of Chl-a in the regional water body. The results show that (1) the addition of meteorological parameters as auxiliary variables improved the precision of the three machine models; the decision coefficient (R2) rose by 7.25%, 5.71%, and 7.20%, respectively, to 0.76, 0.66, and 0.73. (2) The concentration of Chl-a in the lake region was projected from June to October 2019 to October 2021 using the RF optimal estimating model of meteorological fusion. The northeast, southwest, and south of the lake were where the comparatively high concentration values of Chl-a were located, whereas the lake’s center had a generally low concentration of the substance. Chromatically, Chl-a typically peaked in August after initially increasing and then declining. (3) The three rivers that feed into the river have varying levels of water pollution, with chemical oxygen demand (COD) and total nitrogen (TN) pollution being the most severe. This is what primarily caused the higher levels of Chl-a in the northeast, southwest, and south. This study is crucial for the preservation and restoration of Hulun Lake’s natural ecosystem and offers some technical support for the monitoring of the lake’s concentration of Chl-a.

Genome assembly of the rare and endangered Grantham’s camellia, Camellia granthamiana

Grantham’s camellia (Camellia granthamiana Sealy) is a rare and endangered tea species discovered in Hong Kong in 1955 and endemic to southern China. Despite its high conservation value, the genomic resources of C. granthamiana are limited. Here, we present a chromosome-scale draft genome of the tetraploid C. granthamiana (2n = 4x = 60), combining PacBio long-read sequencing and Omni-C data. The assembled genome size is ∼2.4 Gb, with most sequences anchored to 15 pseudochromosomes resembling a monoploid genome. The genome has high contiguity, with a scaffold N50 of 139.7 Mb, and high completeness (97.8% BUSCO score). Our gene model prediction resulted in 68,032 protein-coding genes (BUSCO score of 90.9%). We annotated 1.65 Gb of repeat content (68.48% of the genome). Our Grantham’s camellia genome assembly is a valuable resource for investigating Grantham’s camellia’s biology, ecology, and phylogenomic relationships with other Camellia species, and provides a foundation for further conservation measures.

Testing the accuracy of a four serum microRNA panel for the detection of primary bladder cancer: a discovery and validation study

: Background Bladder cancer (BC) is one of the ten most common cancers worldwide with late detection and early age of diagnosis. There is abundant evidence that early detection and timely intervention can lead to a better prognosis of BC. Substantial evidence has indicated that microRNAs (miRNAs) are specific to different tumor types and are remarkably stable, indicating that serum miRNAs may serve as potential cancer diagnostic markers. This study aimed to identify suitable serum miRNAs to create a panel that can be used to diagnose primary BC. Methods In this study, 18 miRNAs that were differentially expressed in BC were obtained from the PubMed or Gene Expression Omnibus database. Then, 18 BC-related-miRNAs were verified in screening and validation sets created using 56 (28 primary BC vs. 28 NCs) and 168 (84 primary BC vs. 84 NCs) serum samples, respectively. Quantitative reverse transcription-PCR (qRT-PCR) was performed to verify the identity of the differential miRNAs. A multi-miRNA panel with superior diagnostic performance was constructed. TCGA and KEGG databases were used to conduct the survival analysis and bioinformatics analysis, respectively. Results Six serum miRNAs (miR-221-5p, miR-181a-5p, miR-98-5p, miR-15a-5p, miR-222-3p, and miR-197-3p) were significantly aberrantly expressed in the BC patients, while four miRNAs from among them (miR-221-5p, miR-181a-5p, miR-15a-5p, miR-222-3p) were assembled into a panel that showed high diagnostic value (AUC = 0.875, 95% CI: 0.815 - 0.921; sensitivity: 82.14%; and specificity: 85.71%) based on the logistic regression analysis. The survival analysis showed that miR-181a-5p was closely associated with BC prognosis (Log-rank p-value < 0.05). Conclusion The combination of the four miRNAs (miR-221-5p, miR-181a-5p, miR-15a-5p and miR-222-3p) may be a novel non-invasive serological biomarker for BC screening.

Activity Calculation and Vacuum Separation Theoretical Research concerning Ag–Cu, Ag–Sb and Cu–Sb Binary Alloys

The Ag–Cu–Sb system is a key component of lead anode slime and boasts an exceptionally high economic recovery value. In this work, six models, including the Molecular Interaction Volume Model (MIVM), Modified Molecular Interaction Volume Model (M-MIVM), Wilson equation, Miedema model, Regular Solution Model (RSE) and Sub-Regular Solution Model (SRSE), are used to calculate the predicted values of the activity and its deviations with experimental data for binary alloys in the Ag–Cu–Sb system for the first time. The result reveals that the overall means of the average relative deviation and average standard deviation of the M-MIVM are 0.01501 and 3.97278%, respectively, which are about two to six times smaller than those of the other five models, indicating the stability and reliability of the M-MIVM. In the meantime, the predicted data of the Cu–Ag binary alloy at 1423 K, Sb–Ag binary alloy at 1250 K and Sb–Cu binary alloy at 1375 K calculated from the M-MIVM are more reliable and pass the Herington test. Then, the separation coefficient–composition (β–x), temperature–composition (T–x–y) and pressure–composition (P–x–y) of the Cu–Ag, Sb–Ag and Sb–Cu binary alloys are plotted based on the M-MIVM and vacuum theories, showing that the Cu–Ag binary alloy is relatively difficult to separate and that high temperatures or high copper contents are detrimental to obtaining high-purity silver. Meanwhile, theoretical data of the T–x–y diagram are consistent with the available experimental data. These results can guide vacuum separation experiments and industrial production concerning Ag–Cu, Ag–Sb and Cu–Sb binary alloys.

Optimization Study of Soil Organic Matter Mapping Model in Complex Terrain Areas: A Case Study of Mingguang City, China

Traditional soil organic matter mapping is mostly polygonal drawing, which is even more difficult to accurately depict in complex terrain areas. The spatial distribution of soil organic matter is closely related to agricultural production, natural resources, environmental governance, and socio-economic development. Efficiently, economically, and accurately obtaining information on changes in soil organic matter in areas with diverse topography is an urgent problem to be solved. Mingguang City has a high research value because of its unique topography and natural landscape. To solve the problem of soil organic matter mapping in this area, this study will construct an excellent organic matter prediction model. Using 173 soil survey samples (123 for training and 50 for testing), the optimal feature variable subsets selected from 31 environmental variables through Pearson correlation, stepwise regression-variance inflation factor, and recursive feature elimination models based on different algorithms were employed. Each selected feature subset was then used to construct organic matter prediction models using multiple advanced machine learning algorithms. By comparing accuracy validation and model performance, the organic matter prediction model suitable for Mingguang City (RFE-RF_SVM) was obtained, that is, the prediction model of organic matter based on support vector machines with the feature variables screened by the feature recursive elimination algorithm of random forest with RMSE = 3.504, VSI = 0.036, and R-squared = 0.730. Furthermore, the analysis focused on assessing the significance of the predictive factors. The mapping results of this study show that the soil organic matter content in the central and northwestern parts of the study area is low, and the reasons for this situation are different. The central part is mainly caused by the change of land use and topography, while the northwestern part is caused by the loose soil structure caused by the parent material. The government can take targeted measures to improve the soil in the areas with poor organic matter.

Construction of TiO2/WO3/TiO2 double heterojunction films for excellent electrochromic performance

Electrochromic devices are applied extensively to camouflages, smart windows, heat insulation layers, and automobile rearview mirrors, etc. The amorphous WO3 is a very attractive electrochromic material, whereas it suffers from degradation of optical modulation and reversibility on ion exchange owing to those deep trapped ions with irreversible reaction behavior. Herein, we designed and, by using magnetron sputtering, prepared a composite film with TiO2/WO3/TiO2 double heterojunctions, which is capable of eliminating the deep trapped ions by itself under ultraviolet light (UV) assistance. The electrochromic device based on this composite film, after being recovery by short-time UV irradiation, can maintain a high transmission modulation of 94.72% after 7000 cycles of the voltammetry measurement. This feature allows the device to maintain its initial electrochromic performance after prolonged use. Moreover, the double heterojunction structure can reduce colouring time and enormously improve the colouration efficiency (CE) of electrochromic devices. Experimental research shows that when the thickness of the bottom and upper TiO2 layer of the WO3 film was 145.5 nm and 97.0 nm, respectively, the CE of electrochromic devices reached a perfectly high value (479.3 cm2/C), being much higher than that of WO3 devices (69.5 cm2/C). Functions of the TiO2/WO3/TiO2 double heterojunction in electrochromic device were investigated by combining theoretical analysis and experiment validation, and these results provide a general framework for developing and designing superior electrochromic materials and devices.

CHALLENGES AND OPPORTUNITIES TO DESIGN FUTURE CROPS: GATEWAY TO SUSTAINABLE AGRICULTURE IN 21ST CENTURY

The global food production system is facing numerous challenges due to factors such as population growth, climate change, limited resources, and environmental preservation. To address these challenges, various strategies can be employed to develop future crops that are more productive, nutritious, and resilient. One strategy is to improve the yield potential of existing crops by developing new high-yielding cultivars. This can be achieved through the development of new varieties that can produce more grain under optimal conditions. Additionally, improving the nutritional quality of crops is important to address nutrient deficiencies. Synthetic biology and metabolic engineering methods can be used to develop crops with enhanced nutritional value. Efficient utilization of agricultural resources is another important aspect of crop improvement. This includes developing crops that use water and nutrients more efficiently, reducing the need for irrigation and fertilizers, and minimizing environmental impacts. Increasing the resistance of crops to pests, diseases, and extreme weather events can also help reduce the use of pesticides and minimize crop losses. The domestication of wild or semi-wild plants through genetic manipulation offers new opportunities for crop design. These plants may have high nutritional value, stress tolerance, and specialized metabolites that can be incorporated into cultivated crops. Similarly, the domestication of orphan or neglected plants can contribute to crop improvement by incorporating unique traits. Genetic improvement through the transfer of genes from wild relatives or other species can also enhance crop productivity. Advancements in genomics and genetic technologies can aid in the identification and transfer of beneficial alleles. Agronomic improvements, such as maximizing the effectiveness of crop protection agents and fertilizers while minimizing their environmental impact, can also contribute to crop performance. The emerging field of synthetic biology offers opportunities for developing novel biological devices and systems that can further enhance crop productivity and resilience. Overall, these strategies can help address the challenges faced by the global food production system.

Study of the Physical, Chemical, and Biologically Active Properties of Avocado Pulp (Persea americana), and Its Use in the Preparation of Some Functional Dairy Products

This research conducted with the aim of manufacturing healthy products (yoghurt and local cream cheese) rich in bioactive compounds and healthy fatty acid using avocado fruit pulp. Avocado pulp used in the manufacture of yoghurt at two, four, and six percent, and the yoghurt stored at 4ﹾ C for seven days. Local cream cheese was handmade by replacing animal butter with 15% avocado pulp. The content of phenolic compounds in fresh avocado pulp determined using HPLC, where it was found to be rich in kaempferol 30.88 ppm, ferulic acid 30.25 ppm, apigenin 22.58 ppm, quercetin 18.98 ppm, and P-coumaric acid 12.66 ppm, as well as rich in some fatty acids: oleic 59.58%, palmitic 17.58%, and α-linolenic 18.05%. Compared to the control sample at the first day of storage, the avocado-fortified yoghurt led to an increase in antioxidant activity by 10.86%, 25.12%, and 34.63%, and in total phenolic content by 129.55%, 343.18%, and 404.55%. The yoghurt sample at four percent was the most accepted in texture, taste, flavor, and general acceptance, and the avocado added a buttery, astringent, and distinct taste to the avocado-fortified samples. Also, the manufactured of local cream cheese by avocado led to a decrease in moisture and fat, and an increase in acidity and total solids, and it was possible to obtain a low-fat functional food with high nutritional value. Results showed that supporting yoghurt with avocado had a positive effect on reducing the total number of microorganisms and was free of molds, yeasts, and coliform growths during storage.

Evaluating Land Suitability for Wheat Cultivation Criteria Analysis Fuzzy-AHP and Geospatial Techniques in Northern Basrah Governorate.

Land suitability assessment is essential for planned land management strategies aimed at preserving soil and increasing productivity while ensuring sustainable agricultural production. Land degradation resulting from poor land management and fallowing practices typically leads to low land productivity in Iraq. To maintain agricultural productivity in the targeted area, agricultural requirements must align with available resources through land suitability analysis. In the northern region of Basrah Governorate in Iraq, the study focused on integrating GIS-based land suitability analysis with the fuzzy-analytical hierarchy process (F-AHP) approach. The analysis revealed varying suitability categories throughout the study area, with the largest proportion of unsuitable areas found in category N2, covering 31,202.36 hectares (37.76%), and category N1, currently unsuitable, covering an area of 19,956.24 hectares (24.15%). On the other hand, the moderately suitable category (S3) covered 8,297.26 hectares (10.04%), while the moderately suitable category (S2) covered 23,177.79 hectares (28.05%) of the total study area. No highly suitable lands were identified. The key determining factors for the suitability of lands for wheat cultivation were high values of electrical conductivity, carbonate minerals, bulk density, and low organic carbon content. Most agricultural lands are being used in a manner that contradicts their suitable potentials in the study area. Therefore, the pattern of agricultural land use needs to be adjusted based on their current potentials to reduce soil degradation.

Geochemical evaluation and basin modelling of the Cretaceous succession in the Azhar Oil field, West Beni Suef Basin, Egypt

Geochemical analysis was performed on the Cretaceous sequence of the Azhar‐A‐2 well in the West Beni Suef Basin (WBSB), Western Desert, Egypt, utilizing data on total organic carbon (TOC), kerogen composition, vitrinite reflectance (Ro%) and Rock‐Eval pyrolysis. In addition, a 1D basin model was built to investigate the burial and temperature history of the study area. The most important Cretaceous source rocks are predominantly reported within the Albian Kharita Formation and Late Cenomanian‐Santonian Abu Roash (AR) Formation. Based on visual kerogen tests and Rock‐Eval pyrolysis, AR Formation (A, E, F, and G) are mixed oil‐ and gas‐prone source rocks with kerogens ranging from type II to type III, where A/R ‘A and F’ Members show dominant oil‐prone kerogen with the highest generative potential, while A/R ‘E and G’ Members are more gas‐prone kerogen. Most samples of the lower Kh Formation were interpreted as gas‐prone kerogen type III with low generative potential. On the other hand, the high amount of liptinite in the visual kerogen macerals is a strong indicator that the lower Petroleum Formation is an oil‐prone rather than gas‐prone source rock. The thermal maturity of the studied members increases consistently with depth, ranging from immature at the top of the AR Formation to the main/peak oil window at the base of the Lower Kharita Formation, which served as an active source rock for the hydrocarbons generated in the WBSB. The high value of the heat flow in the Beni Suef Basin (57 and 60 mW/m2) is a good indicator for the shallowing of the active source rock depth limit depth. From the study of the basin modeling, the main mature zone reached between 9811 and 11,090 ft in the middle of the Late Cretaceous (84.3–82.5 Ma) is through the L. Kharita Formation with three phases of hydrocarbon generation according to transformation ratio, where the second phase is the main stage in which TR is 5%–50%, showing the beginning of oil expulsion (Ro: 0.73%–0.78%, possibly 0.81%).

Tracing the Origin and Magmatic Evolution of the Rejuvenated Volcanism in Santa Clara Island, Juan Fernández Ridge, SE Pacific

Oceanic intraplate volcanoes sometimes experience late-stage eruptive activity known as rejuvenated volcanism, and contrasting interpretations for its petrogenesis depend on the compositional characteristics. In the Juan Fernández Ridge (JFR), a volcanic chain approximately 800 km in length emplaced on the Nazca Plate, some subaerial occurrences of rejuvenated volcanism have been recognized on the Robinson Crusoe and Santa Clara Islands, both part of the same deeply eroded shield volcano complex. This study aims to understand the origin and magmatic evolution of rejuvenated volcanism on Santa Clara Island, emplaced after ~2.15 Ma of quiescence above the shield sequence, mainly via the analysis of unpublished geochemical and isotopic data. Field reconnaissance identified two nearly coeval rejuvenated sequences on Santa Clara Island: Bahía W (BW) and Morro Spartan (MS), both formed by basanitic and picro-basaltic lava flows with brecciated levels and local intercalations of sedimentary and pyroclastic deposits. In comparison to the chemical signature of the preceding shield-building stage (comprised mainly of basalts and picrites), the two rejuvenated sequences exhibit a notable enrichment in incompatible elements, but the Sr, Nd, and Pb isotopes are very similar to the FOZO mantle endmember, with an apparent additional contribution of HIMU and EM1 components. The geochemistry of lavas revealed the involvement of various processes, including contamination by ultramafic xenoliths, high-pressure fractional crystallization of olivine and clinopyroxene, and potential partial assimilation of oceanic lithospheric components. While the oceanic lithosphere has been considered as a potential source, the isotopic data from Santa Clara lies outside of the mixing curve between depleted mantle (DM, here represented by the North Chile Rise and the East Pacific Rise) and the previous shield stage, suggesting that a lithospheric mantle is not the primary source for the rejuvenated stage volcanism. Therefore, we favor an origin of the rejuvenated volcanism from the mantle plume forming the JFR, supported by similarities in isotopic signatures with the shield stage and high values of 208Pb/204Pb (only comparable to San Félix—San Ambrosio in the vicinity of JFR), implying the presence of a regional source with radiogenic 208Pb/204Pb isotope ratios. In addition, isotopic variations are subparallel to the mixing line between HIMU and EM1 components, whose participation in different proportions might explain the observed trends. In conclusion, we propose that the source of the rejuvenated volcanism on Santa Clara Island is a heterogeneous mantle plume, the same one that fed the shield stage. The rejuvenated volcanism is derived from a secondary melting zone away from the main axis of the plume.

The Effects of Feedstock, Pyrolysis Temperature, and Residence Time on the Properties and Uses of Biochar from Broom and Gorse Wastes

Biochar (BC), which can be produced from several feedstocks, has been widely studied. However, the BC derived from highly pyrolytic shrubs, such as broom and gorse, has been less frequently used and only partially characterized. These wastes, when used for the preparation of biochar, can fix carbon and contribute to environmental conservation, helping to achieve sustainable development objectives. Eight biochars from broom and gorse were produced and fully analyzed, providing a more complete and novel description, with new insights for assessing their utilization. The aims of this study were to elucidate the effects of feedstock, pyrolysis temperature, and residence time on biochar properties and to assess the adequacy of these biochars as fuel. Elemental and proximate analyses and estimations of the lower and higher heating values were performed, and physical and chemical properties, as well as several other related energy indices, were determined. The experimental results showed that the temperature was a key factor in the properties of the biochars, while residence time was less important. The BCs obtained from the two feedstocks did not show important effects on the properties, which is consistent with the fact that they are woody legumes. These biochars had a high carbon content and were thermally stable. The BCs also had a high calorific value and suitable energetic properties. Additionally, their PAH contents were low, indicating that the use of these biochars would be safe. In conclusion, broom- and gorse-derived biochars can be considered as renewable fuels for green energy production.

Plastid Phylogenetics, Biogeography, and Character Evolution of the Chinese Endemic Genus Sinojackia Hu

Sinojackia Hu. comprises five to eight Chinese endemic species with high ornamental and medicinal value. However, the generic limits, interspecific relationships and evolutionary history of the genus remain unresolved. In this study, we newly sequenced three plastomes of S. oblongicarpa and compared them with those of the other congeneric species to explore the taxonomic delimitation of the species and the evolutionary history of the genus. The plastome structure of Sinojackia species was extremely conserved in terms of number of genes, sequence length, and GC content. The codon usage patterns revealed that natural selection may be the main factor shaping codon usage bias. Our phylogenetic tree shows that Sinojackia is monophyletic and can be divided into two clades. Sinojackia oblongicarpa as a distinct species is supported for it is distantly related to S. sarcocarpa. The evolutionary analysis of morphological features indicates that the woody mesocarp is an ancestral feature. Sinojackia originated in central Southeast China during the early Miocene. In this period, it experienced elevated diversification and migrated from central Southeast China to the Hunan Province and the Sichuan Province with the development of the Asian monsoon and East Asian flora. Glacial–interglacial interactions with the monsoon climate may provide favorable expansion conditions for Sinojackia on a small scale.

Effects of Plant Growth Regulators on Micropropagation of Black Pepper (Piper nigrum) in Commercial-Scales

Aim: Black pepper (Piper nigrum) is renowned as a popular spice used to flavor dishes around the world and is also an agricultural export commodity that brings high economic value to many countries. However, traditional propagation methods by seed, cuttings, layering, and grafting reveal many limitations such as the low multiplication coefficient, the low survival rate of seedlings, and especially when there is an outbreak of disease, the ability to control the disease source is exceedingly difficult, leading to the spread of disease. Therefore, an alternative method through apical meristem micropropagation has been applied to contribute to sustainable and disease free pepper cultivars. Propagation by apical shoot meristem gives high propagation efficiency, good and uniform seedling quality, and can be propagated in large numbers in a brief period. Methodology: This study is conducted to contribute to optimizing the process of micropropagation of pepper plants to meet the needs of producing excellent quality seedlings, serving the Vietnamese pepper industry. The two steps in the micropropagation sequence studied in this project are shoot formation and bud cluster multiplication. In this study, we investigate the effects of BA (6-Benzylaminopurine) and NAA (α-Naphthalene acetic acid) in shoot formation. Regenerated shoots were then cultured in MS media supplemented with different combinations of Kinetin (6-Furfurylaminopurine) and NAA in bud cluster multiplication experiment. Results: The results showed that the apical shoot meristem cultured on MS medium (Murashige and Skoog, 1962) supplemented with 0.5 mg L-1 NAA and 2.0 mg L-1 BA was the optimal medium for shoot formation rate (100%). Besides, MS culture medium supplemented with Kinetin 1.5 mg L-1 + NAA 0.5 mg L-1 produced superior results in bud cluster multiplication compared with other treatments (8, 20 buds) after 8 weeks (about 2 months). Conclusion: BA, Kinetin and NAA give important rules on micropropagation of black pepper in commercial-scale.