Higher Taste Intensity Research Articles

Innovative meat products from non-traditional sources

This scientific article presents a study on the quality and organoleptic characteristics of roasted venison meat as a potentially promising raw material for producing high-quality food products. The research encompasses an analysis of parameters such as appearance, consistency, aroma, taste, and juiciness. The study's results reveal that venison meat possesses a distinct gamey flavor and aroma, characterized by high taste intensity and meat firmness. The overall quality rating of the finished product stands at 4.82 points, with taste receiving a lower score compared to other attributes. The study also explores the influence of stress on the animal before slaughter on the pH level and moisture-holding capacity of venison meat. Furthermore, the article discusses the importance of monitoring the levels of heavy metals, such as lead and cadmium, in food products and confirms that the levels of these metals in venison meat comply with food safety standards. These findings are critical for ensuring consumer safety and determining the suitability of venison meat for consumption. The research also examines the prospects of using venison meat for delicacy production, leveraging its unique taste and aroma. It substantiates the advantages and limitations of utilizing this type of meat to pique consumer interest in new food products and expand the market. Finally, the article underscores the importance of further research into the quality and safety of venison meat, as well as the development and adherence to sanitary and technological procedures during the processing of venison carcasses to ensure a high-quality and safe end product. This scientific article sheds light on essential aspects of utilizing venison meat as a raw material for food production and contributes to a broader understanding of the potential of this type of meat in the food industry. The research findings make a significant contribution to comprehending the organoleptic properties of venison meat, its quality, and safety, which are pivotal for both producers and consumers.

Comparison of the taste mechanisms of umami and bitter peptides from fermented mandarin fish (Chouguiyu) based on molecular docking and electronic tongue technology.

Unclear taste mechanisms of peptides limit rapid screening of taste peptides with high intensity. In this study, the taste mechanisms of umami and bitter peptides from Chouguiyu were compared. After molecular docking of core umami (NWDDMEK, WFKDEEF, EEEKPKF, DFDDIQK, and DGEKVDF) and bitter (VQDVLKL, VELLKLE, LVVDGVK, VVDLTVR, and VVDGVKL) peptides with T1R1/T1R3 and TASR14, respectively, salt bridges and conventional hydrogen bonds were the main interactions in all taste peptides, in which acidic amino acid residues contributed to the interaction with their receptors. The taste intensity of peptides after solid-phase synthesis was further verified using electronic tongue technology. Spearman correlation analysis showed that docking energy was an important factor for the intensity of taste peptides, while interaction energy and the distance between the binding unit (BU) and the stimulating unit (SU) were also responsible for the bitter intensity. This study provides a theoretical basis to screen novel taste peptides with high taste intensity in fermented foods.

Influence of Sensory Properties in Moderating Eating Behaviors and Food Intake.

Sensory properties inform likes and dislikes, but also play an important functional role in guiding food choice and intake behavior. Odors direct food choice and stimulate sensory-specific appetites and taste helps to anticipate calorie and nutrient content of food. Food textures moderate eating rate and the energy consumed to satiation and post-ingestive metabolism. We summarize how sensory cues moderate intake, and highlight opportunities to apply sensory approaches to improve dietary behavior. Salt, sweet and savory taste influence liking, but also influence energy intake to fullness, with higher taste intensity and duration linked to lower intake. Psycho-physical studies show it is relatively easy to rank taste intensities at different concentrations but more challenging to discriminate fat contents, and fat discrimination declines further when combined with high-taste intensity. Fat has low impact on sensory intensity, but makes significant contributions to energy content. Combinations of high taste and fat-content can promote passive energy over-consumption, and adding fat also increases energy intake rate (kcals/min), reducing opportunities to orally meter consumption. Consumers adapt their oral processing behaviors to a foods texture, which can influence the rate and extent of energy intake. Understanding how texture influences eating behaviors and bolus formation, affords new opportunities to impact eating rate, energy intake and metabolic response to food. Food formulation has traditionally focused on composition and sensory appeal. Future research needs to consider the role of sensory properties in moderating consumer interaction with their food environment, and how they influence calorie selection, and shape our eating behaviors and intake.

Finishing season and feeding resources influence the quality of products from extensive-system Gascon pigs. Part 2: muscle traits and sensory quality of dry-cured ham

The quality of pork products from local breeds in extensive systems depends, among other things, on pig production. In particular, the variability in climatic conditions and feeding resources may influence the properties of tissues at slaughter and the quality of pork and processed products. The present study (part 2) was part of a larger project that assessed the influence of the finishing season and feeding resources on carcass and tissue traits and the quality of meat and dry-cured ham from Gascon pigs in an extensive system. Following the specifications of the Protected Designation of Origin “Noir de Bigorre”, castrated Gascon males were reared on rangelands (grassland and forest areas) and received a supplementary diet from 5 to 6 months of age until slaughter at a minimum of 12 months and ca. 170 kg BW. Three finishing seasons were considered: Winter (n = 18), Spring (n = 22) and Autumn (n = 23). To estimate the specific effects of season on quality traits and avoid bias due to effects of genes known to influence these traits, polymorphisms in the RYR1, PRKAG3, MC4R and LEPR genes were included in the analysis models. Compared to Winter pigs, Spring and Autumn pigs had higher ultimate pH in the semimembranosus and gluteus medius (GM) muscles, lower meat lightness (P < 0.05) and tended to have higher GM intramuscular fat (IMF) content (P < 0.10). They also had higher GM contents of saturated, monounsaturated and polyunsaturated fatty acids (FAs) than Winter pigs (P < 0.05). Spring pigs had the lowest n-6:n-3 polyunsaturated FA ratio and the highest GM α-tocopherol content (P < 0.001), indicating pig grazing. The finishing season did not influence the processing yield of dry-cured hams (24-month process). Within each seasonal group, ten hams selected for genetic variability and IMF content were analyzed by a trained sensory panel. The season did not modify the appearance or odor, but influenced texture and taste. Hams from Winter and Spring pigs had higher tenderness and melting fat scores than hams from Autumn pigs (P < 0.01). Hams from Spring pigs had higher taste intensity and salty taste (P < 0.01) but lower positive tastes (e.g. fruits, forest) than hams from the other groups. Overall, finishing season had moderate effects on ham sensory traits. Furthermore, our results reveal high redness, tenderness, taste and odor intensity, and low rancid flavor of hams from Gascon pigs produced in an extensive system.

Impact of packaging shape and material on consumer expectations

Packaging appearance is important in evoking consumer impressions. No study has yet explored how two prominent packaging attributes, shape and material, affect the consumers’ impressions and their expectations in the case of coffee products. Therefore, the objective of this study was to investigate whether the packaging shape has an impact on the taste intensity expected by the consumer, and whether packaging materials influence the expected coffee quality. In an online experiment, 115 participants evaluated different packaging samples. They rated the expected taste intensity for packaging samples that varied in shape complexity (i.e., cylindrical, rounded-angular, hexagonal and multifaceted). They also rated the expected coffee quality for packaging samples that varied in material (i.e., plastic, aluminium, glass and metal). The results showed that the packaging with a higher degree of shape complexity was associated with a higher taste intensity. Furthermore, we found a negative effect of glass on the expectation of product quality. The findings could be applied in product packaging design which aims to match the expected and actual characteristics of the product.

Taste Perception and Water Swallow Screen Results in Old-Old Women.

Changes in both swallowing and taste commonly occur in advanced age, though the relationship between the two is unknown. This study examined the association between a water swallow screen test and taste identification and intensity rating. Participants included 47 community-dwelling women aged 85–94 years. Participants completed three trials of a water swallow screen and were observed for signs of aspiration, which, if present, indicated failure. Four pure taste stimuli at low and high concentrations and water were presented, and participants selected one of five taste labels and rated their intensity on the generalized Labeled Magnitude Scale. Ratios of intensity ratings were computed for each taste stimulus to compare the perception of low and high concentrations. The association between water swallow screen failure, correct taste identification, and taste intensity ratio was evaluated with logistic regression modeling, with mediating factors of frailty and number of comorbidities. Failure of three water swallow screen trials was associated with a higher taste intensity ratio for caffeine (bitter) and a lower taste intensity ratio for sucrose (sweet). Correct identification of taste, frailty, and number of comorbidities were not associated with failure of any number of water swallow screen trials. Intensity ratings of certain tastes may be associated with swallowing in old-old women. Heightened vigilance in this population may be necessary to prevent complications related to dietary intake.

The Effect of Barium on Perceptions of Taste Intensity and Palatability

Barium may affect the perception of taste intensity and palatability. Such differences are important considerations in the selection of dysphagia assessment strategies and interpretation of results. Eighty healthy women grouped by age (younger, older) and genetic taste status (supertaster, nontaster) rated intensity and palatability for seven tastants prepared in deionized water with and without 40% w/v barium: noncarbonated and carbonated water, diluted ethanol, and high concentrations of citric acid (sour), sodium chloride (salty), caffeine (bitter), and sucrose (sweet). Mixed-model analyses explored the effects of barium, taster status, and age on perceived taste intensity and acceptability of stimuli. Barium was associated with lower taste intensity ratings for sweet, salty, and bitter tastants, higher taste intensity in carbonated water, and lower palatability in water, sweet, sour, and carbonated water. Older subjects reported lower palatability (all barium samples, sour) and higher taste intensity scores (ethanol, sweet, sour) compared to younger subjects. Supertasters reported higher taste intensity (ethanol, sweet, sour, salty, bitter) and lower palatability (ethanol, salty, bitter) than nontasters. Refusal rates were highest for younger subjects and supertasters, and for barium (regardless of tastant), bitter, and ethanol. Barium suppressed the perceived intensity of some tastes and reduced palatability. These effects are more pronounced in older subjects and supertasters, but younger supertasters are least likely to tolerate trials of barium and strong tastant solutions.

Children's hard-wired aversion to pure vegetable tastes. A ‘failed’ flavour–nutrient learning study

Conditioning is an important mechanism for establishing food preferences. Although the basic principles for conditioning are well-known, less is known about the conditions under which this type of learning takes place. This paper aims to add to the knowledge of the essential conditions for flavour–nutrient learning with vegetable flavours. We describe a study which aimed to investigate whether flavour–nutrient learning is effective in increasing 7–8-year-old children's preference for vegetables. Their preference for, and consumption of, two different vegetable drinks was measured before and after a 14-day-conditioning period, using a within-subject design. Flavour–nutrient learning could not occur, due to insufficient consumption during the conditioning period: 2.4 g (S.D. = 5.6) for the high energy (HE) drink and 3.0 g (S.D. = 9.3) for the low energy (LE) drink. The high taste intensity may have caused the insufficient consumption. We hypothesize that the pure taste of vegetables in itself is not acceptable. Mixing vegetables with other foods may lead to gradual acceptance of vegetables through flavour–flavour and flavour–nutrient learning. Future flavour–nutrient learning studies with children should use less intense vegetable flavours.

Determination and gustatory properties of taste-active compounds in tomato juice

The water-soluble compounds of a tomato juice selected for its high taste intensity and quality, have been investigated by both physico-chemical and sensory analyses. The physico-chemical assessment of the crude juice led to the construction of a synthetic model juice. Although 97% of the material contained in the crude juice has been identified and quantified, significant sensory differences between the crude and model juice have been found concerning bitterness and sharpness, showing that the components responsible for these gustatory descriptors have not yet been identified in the juice. For the other descriptors: sweetness, saltiness, sourness, umami and astringency, no significant differences were found between these two solutions. Using the model juice, omission tests were performed to explain the three main tastes of the juice: saltiness, sweetness and sourness. Sweetness was mainly attributable to sugars while the non-dissociated and dissociated forms of the organic acids, with potassium as counterion, seemed mainly responsible for sourness and saltiness. Moreover, several masking effects were observed between taste-active components. The contribution of the taste-active compounds to the main tastes were quantified by stepwise multiple linear regressions. The model explained up to 95, 89.9 and 85.8% of sourness, saltiness and sweetness, respectively.