Higher Relative Yield Research Articles

Ternary fission of various Z=120 isotopes with 3H, 4He and 8Be as light charge particle

The spontaneous cold ternary fission of various Z = 120 isotopes accompanied by light charge particles (LCP's)3H, 4He and 8Be in equatorial configuration is investigated using Unified ternary fission model (UTFM). The favourable ternary fission channel is predicted based on the computation of Q value, driving potential, barrier penetrability and relative yield of all potential ternary fragment configurations. For the parent isotopes 302,306,308,120 with LCP 3H, the maximum relative yield is for the combinations that have one fragment respectively as 131,132I and 139Ba, which are nearly magic. However, in the case of310120 with LCP 3H, the combination 145La+162Sm+3H exhibits the maximum relative yield. For the 4He accompanied fission of 302,306,308,310,120 isotopes, the fragmentation that include 139Cs, 140,144Ba and 131Te isotopes, which is in the vicinity of shell closure possess high relative yield. In the case of8Be accompanied ternary breakup of the parent isotopes 302,306,120, the maximum yield is due to the magic neutron shell and near-magic proton shell of 134Te. Whereas, for parent isotopes 308,310,120, it is due to the presence of respective doubly magic 132Sn and near doubly magic 131Sn as one fragment. Therefore, our findings emphasize the prominent role of both high Q value as well as existence of doubly and near doubly magic nuclei in the ternary fission of super heavy even-even isotopes 302,306–310,120, accompanied by light charge particles 3H, 4He and 8Be.

A Thermo-Responsive MOFs for X-Ray Scintillator.

Thermo-responsive smart materials have aroused extensive interest due to the particular significance of temperature sensing. Although various photoluminescent materials are explored in thermal detection, it is not applicable enough in X-ray radiation environment where the accuracy and reliability will be influenced. Here, a strategy is proposed by introducing the concept of radio-luminescent functional building units (RBUs) to construct thermo-responsive lanthanide metal-organic frameworks (Ln-MOFs) scintillators for self-calibrating thermometry. The rational designs of RBUs (including organic ligand and Tb3+/Eu3+) with appropriate energy levels lead to high-performance radio-luminescence. Ln-MOFs scintillators exhibit perfect linear response to X-ray, presenting low dose rate detection limit (min ≈156.1 nGyairs-1). Self-calibrating detection based on ratiometric XEL intensities is achieved with good absolute and relative sensitivities of 6.74 and 8.1%K-1, respectively. High relative light yield (max ≈39000 photons MeV-1), imaging spatial resolution (max ≈18 lpmm-1), irradiation stability (intensity ≈100% at 368 K in total dose up to 215 Gyair), and giant color transformation visualization benefit the applications, especially the in situ thermo-responsive X-ray imaging. Such strategy provides a promising way to develop the novel smart photonic materials with excellent scintillator performances.

J-Aggregate Promoting NIR-II Emission for Fluorescence/Photoacoustic Imaging-Guided Phototherapy.

J-aggregate is a promising strategy to enhance second near-infrared window (NIR-II) emission, while the controlled synthesis of J-aggregated NIR-II dyes is a huge challenge because of the lack of molecular design principle. Herein, bulk spiro[fluorene-9,9'-xanthene] functionalized benzobisthiadiazole-based NIR-II dyes (named BSFX-BBT and OSFX-BBT) are synthesized with different alkyl chains. The weak repulsion interaction between the donor and acceptor units and the S…N secondary interactions make the dyes to adopt a co-planar molecular conformation and display a peak absorption >880nm in solution. Importantly, BSFX-BBT can form a desiring J-aggregate in the condensed state, and femtosecond transient absorption spectra reveal that the excited states of J-aggregate are the radiative states, and J-aggregate can facilitate stimulated emission. Consequently, the J-aggregated nanoparticles (NPs) display a peak emission at 1124nm with a high relative quantum yield of 0.81%. The efficient NIR-II emission, good photothermal effect, and biocompatibility make the J-aggregated NPs demonstrate efficient antitumor efficacy via fluorescence/photoacoustic imaging-guided phototherapy. The paradigm illustrates that tuning the aggregate states of NIR-II dye via spiro-functionalized strategy is an effective approach to enhance photo-theranostic performance.

Performance of Direct-Seeded Upland Rice-Based Intercropping Systems Under Paired Rows in East-West Orientation

Production potential of rice based intercropping systems with legumes in Uganda is little known. Studies were conducted at Ikulwe Station of the National Agricultural Research Organisation to evaluate upland rice-based intercropping systems under paired-rows in the EW direction. A randomized complete block design with 3 replications was adopted during 2022 and 2023 with 8 pure stand and intercropped treatments. Adjustment from conventional planting to paired rows recorded high rice height and significant 1000 seed weights. In 2022 the 2 pure rice treatments produced significantly more tillers and panicles but legume intercrops reduced numbers of rice tillers and panicles. Intercropping significantly reduced the beans height (48%) and soybean pods (41%) during both years and also reduced the pods filling for beans (66%), groundnuts (36%) and soybeans (18.3%) during 2022. Although paired rice did not influence rice yield during both years, lower mean yield for rice (19.8%), beans (35%), groundnuts (33%) and soybeans (30.5%) were recorded. Lower legume intercrop yields were similarly recorded for beans (70%), groundnuts (73%) and soybeans (62%) during 2023. Partial (p) land equivalent ratios (LER) for intercrops were not significant and less than unity, but the one for rice intercropped with beans increased to more than unity (1.06) during 2023. All combined LER for rice-legumes were more than unity and the pLER of sole crops was 1.0. Rice + beans recorded high area time equivalent ratio during the 2 years while high relative equivalent yield and monetary advantage indices were recorded under rice + soybeans. Rice was more aggressive than other crops and intercropped treatments recorded higher Total Rice Grain yield equivalent (TRGYE) than sole rice. Rice + soybeans (2022) and rice + beans (2023) scored higher TRGY. The findings suggest that farmers can intercrop soybean in rice under paired rows in EW orientation for more benefits.

Sequential Co-Immobilization of Enzymes on Magnetic Nanoparticles for Efficient l-Xylulose Production.

Multi-enzymatic strategies have shown improvement in bioconversion during cofactor regeneration. In this study, purified l-arabinitol 4-dehydrogenase (LAD) and nicotinamide adenine dinucleotide oxidase (Nox) were immobilized via individual, mixed, and sequential co-immobilization approaches on magnetic nanoparticles, and were evaluated to enhance the conversion of l-arabinitol to l-xylulose. Initially, the immobilization of LAD or Nox on the nanoparticles resulted in a maximum immobilization yield and relative activity of 91.4% and 98.8%, respectively. The immobilized enzymes showed better pH and temperature profiles than the corresponding free enzymes. Furthermore, co-immobilization of these enzymes via mixed and sequential methods resulted in high loadings of 114 and 122 mg/g of support, respectively. Sequential co-immobilization of these enzymes proved more beneficial for higher conversion than mixed co-immobilization because of better retaining Nox residual activity. Sequentially co-immobilized enzymes showed a high relative conversion yield with broader pH, temperature, and storage stability profiles than the controls, along with high reusability. To the best of our knowledge, this is the first report on the mixed or sequential co-immobilization of LAD and Nox on magnetic nanoparticles for l-xylulose production. This finding suggests that selecting a sequential co-immobilization strategy is more beneficial than using individual or mixed co-immobilized enzymes on magnetic nanoparticles for enhancing conversion applications.

Planar-structured thiadiazoloquinoxaline-based NIR-II dye for tumor phototheranostics.

Second near-infrared (NIR-II) fluorescence imaging shows huge application prospects in clinical disease diagnosis and surgical navigation, while it is still a big challenge to exploit high performance NIR-II dyes with long-wavelength absorption and high fluorescence quantum yield. Herein, based on planar π-conjugated donor-acceptor-donor systems, three NIR-II dyes (TP-DBBT, TP-TQ1, and TP-TQ2) were synthesized with bulk steric hindrance, and the influence of acceptor engineering on absorption/emission wavelengths, fluorescence efficiency and photothermal properties was systematically investigated. Compared with TP-DBBT and TP-TQ2, the TP-TQ1 based on 6,7-diphenyl-[1,2,5]thiadiazoloquinoxaline can well balance absorption/emission wavelengths, NIR-II fluorescence brightness and photothermal effects. And the TP-TQ1 nanoparticles (NPs) possess high absorption ability at a peak absorption of 877 nm, with a high relative quantum yield of 0.69% for large steric hindrance hampering the close π-π stacking interactions. Furthermore, the TP-TQ1 NPs show a desirable photothermal conversion efficiency of 48% and good compatibility. In vivo experiments demonstrate that the TP-TQ1 NPs can serve as a versatile theranostic agent for NIR-II fluorescence/photoacoustic imaging-guided tumor phototherapy. The molecular planarization strategy provides an approach for designing efficient NIR-II fluorophores with extending absorption/emission wavelength, high fluorescence brightness, and outstanding phototheranostic performance.

4,7-(bis(octyloxy)-3-(quinoline-2-ylmethylene)isoindoline-1-one and its boronflouride complex. synthesis and spectral-luminescent properties

4,7-Bis(octyloxy)isoindoline-1,3-dione was obtained by reacting 3,6-bis(octyloxy)phthalonitrile with sodium butoxide in butanol, followed by treatment with hydrochloric acid. Its condensation with quinaldine in the presence of zinc oxide leads to the formation of ( E , Z )-4,7-bis(octyloxy)-3-(quinolin-2-ylmethylene)isoindolin-1-one, which was treated with BF3۰Et2O in the presence of triethylamine in toluene to give a new unsymmetrical analogue of BODIPY - ( Z )-2-(difluoroboryl)-4,7-bis(octyloxy)-3-(quinolin-2-ylmethylene)isoindolin-1-one. The complex exhibits a Stokes shift of 25 nm and a high relative fluorescence quantum yield (0.68). To support the experimental data, DFT and TD-DFT calculations were performed.

Drought Priming and Subsequent Irrigation Water Regimes Enhanced Grain Yield and Water Productivity of Wheat Crop

The most important factor impacting wheat production is water stress that occurs during the reproductive growth stage. Therefore, the plant responses and water productivity as affected by drought priming were investigated during Rabi seasons 2021 and 2022. The field trials were conducted in the research field of the Department of Irrigation and Drainage, Faculty of Agricultural Engineering, Sindh Agriculture University, Tandojam. The Hamal-BNS wheat variety was subjected to differing irrigation water regime levels (40%, 50% and 60% of soil water holding capacity, SWHC) after being subjected to drought priming, irrigation water recovery (water closure period) and drought priming. There were six treatments: (1) DPP-40 (drought priming plants at 40% of SWHC), (2) DPP-50, (3) DPP-60, (4) CTP-40 (controlled treated plants at 40% of SWHC), (5) CTP-50 and (6) CTP-60. During the experiment period, soil moisture content was significantly affected by the different treatments at various growth stages of wheat. The results indicated that winter wheat pre-exposed to drought priming attained a stress imprint that improved the subsequent deficit water levels which occurred during the later plant growth stage as demonstrated by the progress of test weight, grain yield, plant level water use efficiency and irrigation water use efficiency as well as relative yield compared to CTP-50 (control treatment). Under the irrigation water regime levels during the post-anthesis period, primed wheat plants sustained grain yield and higher relative yield than wheat plants without priming due to the better irrigation water regime for drought-primed wheat plants. Similarly, primed wheat plants consumed 18.3% less irrigation water as compared to non-primed plants, which significantly increased plant level WUE and irrigation WUE and decreased dry biomass and root development of drought-primed wheat plants. Therefore, to conserve fresh water for other field crops and increase water productivity in the Sindh province, it is recommended that drought priming is used during the early growth period of wheat plants as a successful irrigation method.

Leaf senescence, nitrogen remobilization, and productivity of maize in two semiarid intercropping systems

It is unclear how interspecific resource competition affects crop leaf senescence in association with nitrogen (N) remobilization and overyielding in semiarid intercropping systems. To address this issue, maize intercropped with soybean (weakly competitive species) and wheat (strongly competitive species) was examined across three consecutive years to explore the effects of resource competition on maize relative and absolute yield gain, leaf senescence traits, N remobilization and physiological activities in a typical semiarid site. High yield (171.8 g plant−1), relative yield (0.63) and net effect (0.99 t ha−1) of maize were observed in the maizesoybean intercropping system, while the opposite trend was found in the maizewheat intercropping systems. Overall, maize benefited from intercropping with soybean but was negatively affected by intercropping with wheat. Interestingly, both intercropping systems significantly delayed the onset time of maize leaf senescence by approximately 5–20 days and prolonged the senescence duration by approximately 8–18 days. Intercropping with soybean increased maize leaf dry matter remobilization from 7.3 to 12.5 g per plant−1 and reduced N remobilization from 0.81 to 0.45 g plant−1, respectively. However, when intercropped with wheat, dry matter and N remobilization of maize leaves were decreased, at 4.8 and 0.13 g plant−1, respectively. Therefore, excessive delay and prolonged leaf senescence reduced leaf dry matter translocation and N to the grain which impaired yield formation. Our findings provided novel insights into the physiological mechanism of overyielding from the perspective of leaf senescence traits and remobilization function in the semiarid intercropping systems.

Lanthanide(III)-Cu4 I4 Organic Framework Scintillators Sensitized by Cluster-Based Antenna for High-Resolution X-ray Imaging.

Scintillator-based X-ray imaging has attracted great attention from industrial quality inspection and security to medical diagnostics. Herein, a series of lanthanide(III)-Cu4 I4 heterometallic organic frameworks (Ln-Cu4 I4 MOFs)-based X-ray scintillators are developed by rationally assembling X-ray absorption centers ([Cu4 I4 ] clusters) and luminescent chromophores (Ln(III) ions) in a specific manner. Under X-ray irradiation, the heavy inorganic units ([Cu4 I4 ] clusters) absorb the X-ray energy to populate triplet excitons via halide-to-ligand charge transfer (XLCT) combined with the metal-to-ligand charge-transfer (MLCT) state (defined as the X/MLCT state), and then the 3 X/MLCT excited state sensitizes Tb3+ for intense X-ray-excited luminescence via excitation energy transfer. The obtained Tb-Cu4 I4 MOF scintillators exhibit high resistance to humidity and radiation, excellent linear response to X-ray dose rate, and high X-ray relative light yield of 29 379±3000 photons MeV-1 . The relative light yield of Tb-Cu4 I4 MOFs is ≈3 times higher than that of the control Tb(III) complex. X-ray imaging tests show that the Tb-Cu4 I4 MOFs-based flexible scintillator film exhibits a high spatial resolution of 12.6lpmm-1 . These findings not only provide a promising design strategy to develop lanthanide-MOF-based scintillators with excellent scintillation performance, but also exhibit high-resolution X-ray imaging for biological specimens and electronic chips.

Alkali-assisted facile and scalable preparation of fluorescent sulfur-doped carbon dots with excellent optical and biological properties from thioctic acid

The preparation of high-performance heteroatom-doped fluorescent carbon dots (CDs) from renewable biomass or biometabolites hold an extensive attention. Here, we report an excess sodium hydroxide (NaOH) assisted method for the preparation of sulfur-doped carbon dots (S-CDs) at lower temperatures by using thioctic acid (TA). Excessive NaOH can promote the thermal decomposition process of thioctic acid in the hydrothermal process, thereby realizing rapid reaction rate (critical time 1 h) and scalable synthesis at low temperature (120 °C). The amount of NaOH and the reaction time were identified as the main factors affecting the synthesis, and the reaction of NaOH with disulfide bonds contributed the most to the generation of fluorescent S-CDs. This in-situ sulfur doping process resulted in excellent fluorescence properties, high relative quantum yield of 11.5%, low biotoxicity, good biocompatibility and excellent solubility, etc. In addition, this as-prepared fluorescent S-CDs showed excellent concentration dependence on ferric ions (Fe3+) and can achieve high-precision and selective detection. This work may provide a high-efficiency synthesis strategy for S-CDs for biological and detection applications.

Investigation of microstructure and strengthening mechanism in CNTs reinforced Mo-based composites

The carbon nanotubes (CNTs) reinforced Mo-based composites were fabricated by an efficient powder metallurgy method, including acid treatment, wet dispersion, ball milling (BM) and spark plasma sintering (SPS). The sintered Mo-based composites possess high relative density (99.1%) and compressive yield strength (970 ± 10 MPa). Acid treatment and wet dispersion effectively address the problems of the agglomeration and subsequent uniform distribution of the CNTs in the composite powders. After BM and SPS, ultrafine-grained composites with a grain size of 1.84 μm and a nanoparticle size of less than 200 nm were obtained. A mechanism for purification and strengthening is proposed. On the one hand, Hf and HfC can adsorb nearby oxygen impurities and purify the Mo matrix. On the other hand, the incoherent interface between Mo and nanoparticles acts as primary dislocation nucleation and prevents the propagation of secondary dislocations, which in turn leads to strain hardening.

Effects of Fusarium Wilt on Cotton Cultivars with and without Meloidogyne Incognita Resistance in Fields.

Cotton (Gossypium hirsutum) cultivar trials were conducted in four fields (6 trials total) with Meloidogyne incognita (Mi)/Fusarium oxysporum f. sp. vasinfectum (Fov) from 2019 to 2021. Cotton cultivars were divided into groups based on company/Mi resistance: S = susceptible to Mi; R-FM, R-DP, and R-PHY = resistance to Mi in FiberMax®, Deltapine®, and Phytogen® cultivars, respectively; ST 4946GLB2 (moderate resistance to Mi and observed field tolerance to Fov); and ST 5600B2XF (resistance to Mi). The S and R-FM groups had the highest transformed Mi densities LOG10(Mi + 1) (LMi = 3.22 and 3.01, respectively), while R-DP and R-PHY had the lowest LMi (2.21 and 1.85, respectively). Plant mortality (%) was higher for R-DP (28.1%) than for all other groups except ST 5600B2XF (24.8%). Mi-susceptible cultivars averaged 23.3% mortality. Relative yield (0-1 scale) was higher for ST 4946GLB2 (0.706) and R-PHY (0.635) than for R-DP (0.530), ST 5600B2XF (0.578), and S (0.491). All groups except R-DP averaged higher relative yield than the susceptible cultivars. ST 4946GLB2 had the lowest mortality (16.5%) and highest relative yield, while R-DP cultivars had the highest mortality and no difference in relative yield from the Mi-susceptible cultivars. The group of R-DP cultivars had excellent Mi resistance but were susceptible to Fov. No cultivars were identified with high resistance to Fov.

Easy-to-Use Visual Sensing System for Milk Freshness, Sensitized with Acidity-Responsive N-Doped Carbon Quantum Dots.

This study established a flexible and eye-readable sensing system for the easy-to-use, visual detection of milk freshness, using acidity-responsive N-doped carbon quantum dots (N-CQDs). N-CQDs, rich in amino groups and with characteristic acidity sensitivity, exhibited high relative quantum yields of 25.2% and an optimal emission wavelength of 567 nm. The N-CQDs fluorescence quenching upon the dissociated hydrogen ions (H+) in milk and their reacting with the amino groups produced an excellent linear relation (R2 = 0.996) between the fluorescence intensity and the milk acidity, which indicated that the fluorescence of the N-CQDs was highly correlated with milk freshness. Furthermore, a fluorescence sensor was designed by depositing the N-CQDs on filter-papers and starch-gel films, to provide eye-readable signals under UV light. A fluorescence colorimetric card was developed, based on the decrease in fluorescence brightness as freshness deteriorated. With the advantages of high sensitivity and eye readability, the proposed sensor could detect spoiled milk in advance and without any preprocessing steps, offering a promising method of assessing food safety.

Synthesis and in vitro biological evaluation of novel water‐soluble porphyrin complexes for cancer photodynamic therapy

AbstractIn this study, we report the synthesis and biological evaluation of four novel cationic porphyrins (named as P1, P2, ZnP2, and CuP2) with potential as a photodynamic therapeutic agent. MTT experiments proved that P1, P2, and ZnP2 have high light toxicity and low dark toxicity for A549, H‐1975, and HepG2 cell lines. In addition, due to the specific targeting of porphyrin, there was only a weak toxicity to Hs 578Bst normal breast cancer cells. The study further confirmed the intracellular generation of reactive oxygen species (ROS) under light irradiation and ZnP2 could be effectively internalized by cells and also indicated that the photodynamic therapy effect achieved by ZnP2 and light irradiation can cause significant cell apoptosis. High relative singlet oxygen quantum yield and excellent phototoxicity ensure the optimal photosensitizer ZnP2 becomes potential candidates for photodynamic therapy drugs. Our results disclosed that the cationic porphyrin complexes used photodynamic therapy for the development of new and useful metal anticancer photosensitizer provide a strong platform.

Pressurized ex-situ catalytic co-pyrolysis of polyethylene and lignin: Efficient BTEX production and process mechanism analysis

Ex-situ catalytic co-pyrolysis of plastic and biomass to aromatics has been extensively investigated, simultaneously, aromatization have been reported to be promoted under pressure, but available research did not discuss the combined effect of catalytic co-pyrolysis and pressure on aromatics production. In this work, ex-situ catalytic co-pyrolysis of polyethylene and lignin over HZSM-5 under a series of pressure (0.1–0.8 MPa) in a Py-GC/MS system was investigated. We show that pressurized operation during co-pyrolysis of polyethylene and lignin leads to a large increase in BTEX relative yield while maintaining catalyst stability. A very high BTEX relative yield of 70.94% can be achieved at temperature of 650 °C, pressure of 0.5 MPa, polyethylene to lignin ratio of 1:1, and catalyst to raw material ratio of 4:1. Ratio of two raw materials significantly affects efficiency of hydrogen radicals-mass transfer by regulation of hydrogen radical emission and reception. A peak value of BTEX relative yield of 70.27% was obtained at a polyethylene to lignin ratio of 4:3. Among BTEX, benzene and toluene are more prone to alkylate and polycondensate into highly branched and polycyclic aromatics, due to a lower steric hindrance. Hydrogen radicals-mass transfer has a significant effect on BTEX production, and mass transfer efficiency can be regulated by appropriate pressure and raw materials ratios. Meanwhile, pressurized operation has a dual positive effect on coke inhibition via promoting hydrogen radicals-mass transfer and water release, such that catalyst stability and BTEX production are promoted. This study offers new insight into efficient production of BTEX.

A multi-environment framework to evaluate the adaptation of wheat (Triticum aestivum) to heat stress

Key messageAssessing adaptation to abiotic stresses such as high temperature conditions across multiple environments presents opportunities for breeders to target selection for broad adaptation and specific adaptation.Adaptation of wheat to heat stress is an important component of adaptation in variable climates such as the cereal producing areas of Australia. However, in variable climates stress conditions may not be present in every season or are present to varying degrees, at different times during the season. Such conditions complicate plant breeders’ ability to select for adaptation to abiotic stress. This study presents a framework for the assessment of the genetic basis of adaptation to heat stress conditions with improved relevance to breeders’ selection objectives. The framework was applied here with the evaluation of 1225 doubled haploid lines from five populations across six environments (three environments selected for contrasting temperature stress conditions during anthesis and grain fill periods, over two consecutive seasons), using regionally best practice planting times to evaluate the role of heat stress conditions in genotype adaptation. Temperature co-variates were determined for each genotype, in each environment, for the anthesis and grain fill periods. Genome-wide QTL analysis identified performance QTL for stable effects across all environments, and QTL that illustrated responsiveness to heat stress conditions across the sampled environments. A total of 199 QTL were identified, including 60 performance QTL, and 139 responsiveness QTL. Of the identified QTL, 99 occurred independent of the 21 anthesis date QTL identified. Assessing adaptation to heat stress conditions as the combination of performance and responsiveness offers breeders opportunities to select for grain yield stability across a range of environments, as well as genotypes with higher relative yield in stress conditions.

Crop Response to Combined Availability of Soil Water and Its Salinity Level: Theory, Experiments and Validation on Golf Courses

The phenomenological expression showing crop yield to be directly dependent on water deficiency, under saline conditions, has encouraged a continued focus on salinity as a viable approach to increase crop yields. This work reassesses crop response to availability of saline soil water ASW in two stages (A) Develop a simple approach suggesting that permanent wilting point (WP) increases under high saline soil water tension and relative yield of Lettuce (Lactuca sativa L., var longifolia Lam., cv. Nevada) and maize (Zea mays L., cv. Jubilee sweet) decrease. (B) Using a deterministic numerical soil water model to validate the theory on Bermuda grass of golf courses. The experimental plots were established in the North Negev, Israel (Sweet corn) and the Algarve, Portugal (Lettuce and Bermuda grass covering the golf courses). Sprinkler irrigation and line source techniques were used for water application, creating a saline gradient under a precise irrigation water distribution. Two salinity empirical models were tested (Mass and Hoffman MH and van Genuchten–Gupta vGG). Their empirical models were modified and instead of soil electrical conductivity of irrigation water (ECe) we used wilting point (WP) and RASW to follow the changes in relative yield. The validation was conducted with theoretical soil plant atmosphere water (SPAW) to predict the results on golf courses. It is concluded that an alternative S-shaped response model provides better fit to our experimental data sets. Modified MH model (Yr = Y/Ymax = a ∗ (ASW–threshold’s constant) revealed that a single dimensionless curve could be used to express yield—salinity interference when represented by varying ASW. The vGG model: vGG can represent salt tolerance of most crops, by using varying wilting point of average root zone salinity, at which the yield has declined by 50%. The abscissa of both models was based on WP rather than the standard soil electrical conductivity (ECw). The correlation between the experimental data and WP or relative available soil water (RASW) was acceptable and, therefore, their usefulness for prediction of relative yield is acceptable as well. The objectives of this study were: 1. To develop a simple model describing the effect of salinity through soil water availability on crop production; 2. To replace the standard varying soil electrical conductivity ECe used by MH and vGG models by two soil parameters (at wilting point- θwp and at field capacity θfc) in order to describe the relationship between them and relative yield. 3. Validate the new model with respect to independent salinity on Golf courses and a mathematical deterministic model.

Catalytic Pyrolysis of Municipal Solid Waste: Effects of Pyrolysis Parameters

Burning municipal solid waste (MSW) increases CO2, CH4, and SO2 emissions, leading to an increase in global warming, encouraging governments and researchers to search for alternatives. The pyrolysis process converts MSW to oil, gas, and char. This study investigated catalytic and noncatalytic pyrolysis of MSW to produce oil using MgO-based catalysts. The reaction temperature, catalyst loading, and catalyst support were evaluated. Magnesium oxide was supported on active carbon (AC) and Al2O3 to assess the role of support in MgO catalyst activity. The liquid yields varied from 30 to 54 wt% based on the experimental conditions. For the noncatalytic pyrolysis experiment, the highest liquid yield was 54 wt% at 500 °C. The results revealed that adding MgO, MgO/Al2O3, and MgO/AC declines the liquid yield and increases the gas yield. The catalysts exhibited significant deoxygenation activity, which enhances the quality of the pyrolysis oil and increases the heating value of the bio-oil. Of the catalysts that had high deoxygenation activity, MgO/AC had the highest relative yield. The loading of MgO/AC varied from 5 to 30 wt% of feed to the pyrolysis reactor. As the catalyst load increases, the liquid yield declines, while the gas and char yields increase. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Development of biparatopic bispecific antibody possessing tetravalent scFv-Fc capable of binding to ROBO1 expressed in hepatocellular carcinoma cells.

There is no standard structural format of the biparatopic bispecific antibody (bbsAb) which is used against the target molecule because of the diversity of biophysical features of bispecific antibodies (bsAbs). It is therefore essential that the interaction between the antibody and antigen is quantitatively analyzed to design antibodies that possess the desired properties. Here, we generated bsAbs, namely, a tandem scFv-Fc, a diabody-Fc, and an immunofusion-scFv-Fc-scFv, that possessed four scFv arms at different positions and were capable of recognizing the extracellular domains of ROBO1. We examined the interactions between these bsAbs and ROBO1 at the biophysical and cellular levels. Of these, immunofusion-B2212A scFv-Fc-B5209B scFv was stably expressed with the highest relative yield. The kinetic and thermodynamic features of the interactions of each bsAb with soluble ROBO1 (sROBO1) were validated using surface plasmon resonance and isothermal titration calorimetry. In all bsAbs, the immunofusion-scFv-Fc-scFv format showed homogeneous interaction with the antigen with higher affinity compared with that of monospecific antibodies. In conclusion, our study presents constructive information to design druggable bbsAbs in drug applications.