High Photoluminescence Quantum Yield Research Articles

Synthesis, Structure, and Optical Property of [6]Cyclo‐1,2‐naphthylene

A one‐pot procedure with cobalt‐mediated oxidation of 2,2’‐dilithio‐1,1’‐binaphthyl by ferrocenium salts afforded the chiral cyclic hexamer of naphthylene, [6]cyclo‐1,2‐naphthylene (1). The molecular structure of 1 was determined by single crystal X‐ray crystallography and NMR analyses, revealing its cyclic structure with an approximate D3 symmetry. Compound 1 exhibits blue emission at 383 nm with high photoluminescence quantum yield of 97%, which can be attributed to its rigid twelve‐membered ring structure. Optical resolution of 1 by chiral HPLC allowed for the evaluation of its chiroptical properties. Each enantiomer exhibits circular dichroism with complex Cotton effects, which are grouped into three positive or three negative couplets. Circularly polarized luminescence is observed at 383 nm with an anisotropy factor |glum| on the order of 10–4. The high photoluminescence quantum yield and the CPL properties of 1 indicate its potential application as a CPL emitter.

Multiple Resonance Quasi‐fluorescence from BN‐Doped Aromatic Compounds Modified with "Naphthalene" Units Approaches the BT.2020 Green Light Standard

Creating fluorophores that meet the Broadcast Service Television 2020 (BT.2020) standard is a significant achievement. In this paper, we present an innovative strategy that could revolutionize the development of high‐performance narrowband fluorophores for ultra‐high‐definition displays. Our approach combines classic multi‐resonance BN‐doped fragments with naphthalene, creating two novel narrowband bright green quasi‐fluorescent emitters, NT‐2B and NT‐3B. When tested in dilute toluene, these molecules exhibit emission peaks at 510 and 511 nm with extremely narrow FWHM values of 15 and 14 nm, respectively. Both molecules also demonstrate conventional fluorescence properties with high photoluminescence quantum yields (PLQYs) of up to 85%. Notably, OLEDs containing NT‐2B achieve a peak EQE of approximately 30% and at a doping concentration of 5 wt.%, OLEDs based on NT‐2B achieve a CIEy value of roughly 0.75, closely matching the BT.2020 standard.

Multiple Resonance Quasi‐fluorescence from BN‐Doped Aromatic Compounds Modified with "Naphthalene" Units Approaches the BT.2020 Green Light Standard

Creating fluorophores that meet the Broadcast Service Television 2020 (BT.2020) standard is a significant achievement. In this paper, we present an innovative strategy that could revolutionize the development of high‐performance narrowband fluorophores for ultra‐high‐definition displays. Our approach combines classic multi‐resonance BN‐doped fragments with naphthalene, creating two novel narrowband bright green quasi‐fluorescent emitters, NT‐2B and NT‐3B. When tested in dilute toluene, these molecules exhibit emission peaks at 510 and 511 nm with extremely narrow FWHM values of 15 and 14 nm, respectively. Both molecules also demonstrate conventional fluorescence properties with high photoluminescence quantum yields (PLQYs) of up to 85%. Notably, OLEDs containing NT‐2B achieve a peak EQE of approximately 30% and at a doping concentration of 5 wt.%, OLEDs based on NT‐2B achieve a CIEy value of roughly 0.75, closely matching the BT.2020 standard.

Extended Surface Bands Enabled Lasing Emission and Wavelength Switch from Sulfur Quantum Dots.

The development of a lasing wavelength switch, particularly from a single inorganic gain material, is challenging but highly demanded for advanced photonics. Nonetheless, all current lasing emission of inorganic gain materials arises from band-edge states, and the inherent fixed bandgap limitation of the band-edge system leads to the inaccessibility of lasing wavelength switching from a single inorganic gain material. Here the realization of a single inorganic gain material-based lasing wavelength switch is reported by proposing an alternative lasing emission strategy, that is, lasing emission from surface gain. Previous efforts to achieve surface-gain-enabled lasing emission have been hindered by the limited gain volume provided by surface states due to the broad emission bandwidth and/or low emission efficiency. This challenge is overcome by introducing extended surface bands onto the surface of sulfur quantum dots. The extended surface bands contribute to a high photoluminescence quantum yield and narrow emission bandwidth, thereby providing sufficient gain volume and facilitating stimulated emission. When combined with whispering gallery mode microcavity, surface gain enabled lasing emission manifests an ultralow threshold of 8.3 µJcm-2. Remarkably, the reconfigurable perturbation to surface gain, facilitated by molecular affinity, allows for the realization of the lasing wavelength switch from a single inorganic gain material.

Toward an Ideal Light Source for Indoor Photosynthesis: Broadband Red Emission in Zero-Dimensional Hafnium-Based Metal Halide (TPP)2HfCl6·4C2H3N:Sb3.

With suitable electron-phonon coupling strength, a near-unity broadband photoluminescence quantum yield (PLQY) can be achieved in organic-inorganic hybrid metal halides (OIHMHs) via self-trapped exciton (STE) emission. However, it is still challenging to obtain high-quality red emission from OIHMHs with a desirable emission wavelength and high chemical stability, which hinders their practical application in high-performance displays, plant-growth lighting, and biomedical imaging. Herein, a series of hafnium-based zero-dimensional (TPP)2HfCl6·4C2H3N (TPP: tetraphenylphosphonium) single crystals with different Sb3+ doping levels are synthesized. The Sb3+-doped (TPP)2HfCl6·4C2H3N shows dual-band red emission with a full width at half-maximum of 178 nm and a high PLQY of 91.09%. This broad dual-band emission originates from dopant-induced extrinsic free excitons and STEs. Furthermore, (TPP)2HfCl6·4C2H3N:Sb3+ was employed as a luminescence converter in a light-emitting diode (LED) for plant growth regulation. A correlated color temperature of 4055 K and a color rendering index of 82.13 were achieved upon excitation of the LED at 365 nm. These results provide fundamental perspectives on the emission behavior of Sb3+-doped OIHMHs and illustrate their promise for use in plant-growth lighting.

High‐Efficiency Circularly Polarized Luminescence Regulation of a Dye‐Doped Polymer Film by Acid/Aggregation

AbstractSmart materials with circularly polarized luminescence (CPL) tunable ability show great potential for advanced information storage and encryption. While an effective integration of high photoluminescence quantum yield (PLQY) and facile regulation of CPL property in thin films are of great significance, it is challenging due to the scarcity of suitable materials and complexity of systems. Herein, a novel acid‐responsive CPL tunable molecule is designed by combining an aggregation‐induced emission (AIE) component (TPE), an acid‐responsive luminophore (Rhodol), and a chiral aniline. Benefitting by the “AIE” effect of TPE and acid‐sensitive nature of Rhodol, the acidified molecule (S‐Rhodol‐TPE) exhibits a high PLQY even when doped in the polymer substrate at high concentrations. In addition, due to the fluorescence resonance energy transfer (FRET) process between TPE and Rhodol, the emission color of S‐Rhodol‐TPE can be easily regulated by the doped ratio and acidified degree of S‐Rhodol‐TPE in the polymer film. This work exhibits a unique approach to achieving smart CPL‐tunable films with high PLQYs and multiple emission color‐regulation properties, which can undoubtedly facilitate the progress of CPL tunable materials.

Reversible Structural Phase Transitions in Zero-dimensional Cu(I)-Based Metal Halides for Dynamically Tunable Emissions.

Exploring structural phase transitions and luminescence mechanisms in Zero-dimensional (0D) metal halides poses significant challenges, that are crucial for unlocking the full potential of tunable optical properties and diversifying their functional capabilities. Herein, we have designed two inter-transformable 0D Cu(I)-based metal halides, namely (C19H18P)2CuI3 and (C19H18P)2Cu4I6, through distinct synthesis conditions utilizing identical reactants. Their optical properties and luminescence mechanisms were systematically elucidated by experiments combined with density functional theory calculations. The bright cyan-fluorescent (C19H18P)2CuI3 with high photoluminescence quantum yield (PLQY) of 77% is attributed to the self-trapped exciton emission. Differently, the broad yellow-orange fluorescence of (C19H18P)2Cu4I6 displays a remarkable PLQY of 83%. Its luminescence mechanism is mainly attributed to the combined effects of metal/halide-to-ligand charge transfer and cluster-centered charge transfer, which effects stem from the strong Cu-Cu bonding interactions in the (Cu4I6)2- clusters. Moreover, (C19H18P)2CuI3 and (C19H18P)2Cu4I6 exhibit reversible structural phase transitions. The elucidation of the phase transitions mechanism has paved the way for an unforgeable anti-counterfeiting system. This system dynamically shifts between cyan and yellow-orange fluorescence, triggered by the phase transitions, bolstering security and authenticity. This work enriches the luminescence theory of 0D metal halides, offering novel strategies for optical property modulation and fostering optical applications.

Dramatic Impact of Materials Combinations on the Chemical Organization of Core-Shell Nanocrystals: Boosting the Tm3+ Emission above 1600 nm.

This article represents the first foray into investigating the consequences of various material combinations on the short-wave infrared (SWIR, 1000-2000 nm) performance of Tm-based core-shell nanocrystals (NCs) above 1600 nm. In total, six different material combinations involving two different types of SWIR-emitting core NCs (α-NaTmF4 and LiTmF4) combined with three different protecting shell materials (α-NaYF4, CaF2, and LiYF4) have been synthesized. All corresponding homo- and heterostructured NCs have been meticulously characterized by powder X-ray diffraction and electron microscopy techniques. The latter revealed that out of the six investigated combinations, only one led to the formation of a true core-shell structure with well-segregated core and shell domains. The direct correlation between the downshifting performance and the spatial localization of Tm3+ ions within the final homo- and heterostructured NCs is established. Interestingly, to achieve the best SWIR performance, the formation of an abrupt interface is not a prerequisite, while the existence of a pure (even thin) protective shell is vital. Remarkably, although all homo- and heterostructured NCs have been synthesized under the exact same experimental conditions, Tm3+ SWIR emission is either fully quenched or highly efficient depending on the type of material combination. The most efficient combination (LiTmF4/LiYF4) achieved a high photoluminescence quantum yield of 39% for SWIR emission above 1600 nm (excitation power density in the range 0.5-3 W/cm2) despite significant intermixing. From now on, highly efficient SWIR-emitting probes with an emission above 1600 nm are within reach to unlock the full potential of in vivo SWIR imaging.

High efficiency in blue TADF OLED using favorable horizontal oriented host

An appropriate host featuring a wide band gap (Eg) and high triplet energy (T1) is crucial for facilitating highly efficient blue-light emitting devices. In this study, 4Ac26CzBz, a new host comprising acridan and carbazole moieties linked to a benzimidazole core, has been synthesized and characterized. Notedly, 4Ac26CzBz exhibits a wide optical gap (Eg) and high triplet energy (T1) of 3.3 and 3.0 eV, respectively, and has been proven a suitable host for blue thermally activated delayed fluorescence (TADF) OLED. By adopting 4TCzBN as a blue-light dopant, a remarkably high device external quantum efficiency of 35.8 % (59.8 cd/A and 62.8 lm/W) and a low turn-on voltage (<3 eV) have been demonstrated, with significant suppression of the efficiency roll-off, maintaining a high efficiency of 29.7 % as luminance at 1000 cd/m2. This excellent performance is deduced from the host’s ambipolar carrier transporting properties, which refer to its ability to transport both electrons and holes effectively, high photoluminescence quantum yield (PLQY) of 98.6 %, and highly horizontal orientation of transition dipole, as determined through diverse analytical measurements. The good material properties of 4Ac26CzBz and the high OLED performance reveal its potential for the next generation’s advanced display and lighting applications.

Clar's Aromatic π-Sextet Rule for the Construction of Red Multiple Resonance Emitter.

Despite the proliferation of multiple resonance (MR) materials in the blue to green spectral ranges, red MR emitters remain scarce in the literature, an area that certainly warrants attention for future applications. Here, through a clever application of classic Clar's aromatic π-sextet rule, we triumphantly constructed the first red MR emitter by substituting the conventional benzene ring core with anthracene (fewer π-sextets). Theoretical studies indicate that the quantity of π-sextets ultimately determines the optical bandgap of a molecule, rather than the number of fused benzene rings. Benefiting from the high photoluminescence quantum yield of ~94% and horizontal dipole ratio of ~90%, the corresponding narrowband red (luminescence wavelength: 608 nm) organic light-emitting diode shows a high external quantum efficiency of 27.3%, with only a slight decrease of 3.7% at an elevated luminance level of 100,000 cd/m2.

Realizing Stable Luminescence in Antimony Doped Hybrid Tin(IV) Chloride toward Full Spectrum WLED and Anticounterfeiting Applications.

The outstanding optical properties empower Sb3+-doped zero-dimensional hybrid metal halides as cutting-edge luminescent materials. In this research, we present an efficient hybrid tin chloride, TEA2SnCl6:Sb3+ (TEA = tetraethylammonium), with broad dual emission bands peaking in the blue and orange regions that arise from the singlet and triplet state emissions of [SbCl5]2-, respectively. TEA2SnCl6:Sb3+ demonstrates a high photoluminescence quantum yield (PLQY) of 83.5% under 328 nm excitation, while 358 nm light induces an orange emission with a PLQY of 92.5% and a low thermal quenching behavior (73.9% at 423 K). Benefiting from the appealing luminescence properties of TEA2SnCl6:Sb3+, a full spectrum white light-emitting diode (WLED) device and an anticounterfeiting model were constructed, affirming the potential use of Sb3+-doped TEA2SnCl6 hybrid metal halide in versatile application fields.

Narrowband Emission in Pt(II) Complexes via Ligand Engineering for Blue Phosphorescent Organic Light‐Emitting Diodes

AbstractIn this study, three stable tetradentate Pt(II) complexes are synthesized and characterized, namely, Pt‐biPh, Pt‐biPh5tBu, and Pt‐biPh4tBu, tailored for blue phosphorescent organic light‐emitting diodes to realize high‐efficiency and narrowband emissions via ligand engineering. Biphenyl (Pt‐biPh) or tert‐butyl‐modified biphenyl (Pt‐biPh5tBu and Pt‐biPh4tBu) is introduced into the carbene unit of the ligand to control the intermolecular interactions between the Pt(II) phosphors. Pt‐biPh, Pt‐biPh5tBu, and Pt‐biPh4tBu exhibit high photoluminescence quantum yields of 74%, 84%, and 92% with exciton lifetimes of 2.2, 2.3, and 2.5 µs, respectively, demonstrating rapid and efficient light emission. Furthermore, Pt‐biPh, Pt‐biPh5tBu, and Pt‐biPh4tBu show maximum external quantum efficiency (EQE) values of 18.1%, 19.0%, and 21.8%, respectively. Pt‐biPh5tBu and Pt‐biPh4tBu exhibit narrowband emission with a full width at half maximum of 21 nm owing to the small vibrational emission because of their sterically hindered and bulky ligand structures. Moreover, phosphor‐sensitized thermally activated delayed fluorescence devices employing a Pt‐biPh4tBu sensitizer achieve a high EQE of 28.6%. In particular, Pt‐biPh4tBu performs better than the state‐of‐the‐art phosphor as the sensitizer of the blue phosphor‐sensitized thermally activated delayed fluorescence devices in terms of the EQE.

Top-Down Synthesis of N-Type PbS Quantum Dots with High Photoluminescence Quantum Yield from Microsized Pb(OH)Cl.

Synthesis of PbS quantum dots (QDs) with uniform and controllable size is of great importance in realizing functionality manipulation, as well as building advanced devices, and these QDs have been normally synthesized via "bottom-up" colloidal chemistry. However, the problems of complicated techniques and the relative high cost of the "bottom-up" methods still need to be overcome. Herein, we present a facile and cost-effective "top-down" strategy for the production of PbS QDs with controllable sizes and narrow dispersions (4.8% < σ < 7%) based on the sulfuration reaction of highly active lead oxide and oxychloride intermediates. We investigated the two-step reaction mechanism of the QD synthesis. Initially, Pb(OH)Cl undergoes a reaction with oleic acid in the presence of oleylamine as an activator, leading to the formation of active lead oxide/oxychloride intermediates. Notably, this distinctive reaction induces the creation of numerous cracks within the intermediates, thereby augmenting the active sites available for the subsequent sulfuration reactions. In that, the sulfur precursor reacts with the intermediates, resulting in the rapid generation of a substantial number of PbS fragments. Over time, these small fragments undergo "ripening" until reaching the "critical" size threshold. Different from the ones obtained by the traditional "bottom-up" method, our synthesized colloidal QDs exhibit a S-rich surface and are confirmed to be N-type. In addition, size-tunable near-infrared photoluminescence renders these QDs a promising material for various applications.

Dual‐Core Engineering for Efficient Deep‐Blue Multiple Resonance Thermally Activated Delayed Fluorescent Materials

AbstractDeveloping narrowband blue multiple resonance (MR) organic emitters with Commission Internationale de L'Eclairage (CIE) y coordinates &lt;0.1 is essential for advanced display technologies. This study proposes a deep‐blue thermally activated delayed fluorescence (TADF) emitter, named 2BNO, which integrates two independent MR cores. Unlike many TADF materials with single‐bonded dual emitting cores, 2BNO utilizes a steric hindrance‐assisted fluorene bridge to achieve an orthorhombic molecular structure. The dual‐core MR‐TADF emitter shows enhanced light absorption and a high photoluminescence quantum yield. Notably, the emission of 2BNO is not significantly redshifted compared to single‐core compounds and maintains a narrow full width at half‐maximum (FWHM) of 24 nm with CIE coordinates of (0.147, 0.041) in 2Me‐THF solution, nearing the BT.2020 blue standard. Organic light‐emitting diodes (OLEDs) incorporating 2BNO as the emitter exhibit deep‐blue emission at 460 nm with a narrow FWHM of 29 nm and CIE coordinates of (0.14, 0.09). The dual emitting core design significantly improves device efficiency, achieving a high external quantum efficiency (EQE) of 19.8%. The dual‐core molecular design strategy in this work is demonstrated to be effective in promoting the efficiency of the TADF emitters while preserving deep‐blue color purity.

Room-temperature efficient and tunable interlayer exciton emissions in WS2/WSe2 heterobilayers at high generation rates.

Transition metal dichalcogenide (TMDC) heterobilayers (HBs) have been intensively investigated lately because they offer novel platforms for the exploration of interlayer excitons (IXs). However, the potentials of IXs in TMDC HBs have not been fully studied as efficient and tunable emitters for both photoluminescence (PL) and electroluminescence (EL) at room temperature (RT). Also, the efficiencies of the PL and EL of IXs have not been carefully quantified. In this work, we demonstrate that IX in WS2/WSe2 HBs could serve as promising emitters at high generation rates due to its immunity to efficiency roll-off. Furthermore, by applying gate voltages to balance the electron and hole concentrations and to reinforce the built-in electric fields, high PL quantum yield (QY) and EL external quantum efficiency (EQE) of ∼0.48% and ∼0.11% were achieved at RT, respectively, with generation rates exceeding 1021 cm-2·s-1, which confirms the capabilities of IXs as efficient NIR light emitters by surpassing most of the intralayer emissions from TMDCs.

Rare earth Nd3+-doped organic-inorganic hybrid perovskite quantum dots for white LED

Lead halide perovskite quantum dots (QDs) have garnered significant attention due to their tunable band gaps, unique quantum confinement effects, and high photoluminescence quantum yields (PLQYs). Among them, Organic-inorganic QDs make them promising candidates for optoelectronic devices such as quantum dot light-emitting diodes (QLEDs), solar cells, lasers, and photodetectors. However, the toxicity of lead (Pb) has raised environmental and health concerns, hindering their industrial application. To alleviate concerns about heavy metals Pb, extensive research has been conducted on B-site doping and the development of lead-free perovskites. Herein, we firstly developed B-site doping strategy on organic-inorganic hybrid perovskite QDs via rare-earth elements. Neodymium (III) (Nd3+) doped FAPbBr3 QDs were prepared through the ligand-assisted reprecipitation method at room temperature. The B-site doping strategy could alleviate the heavy metal problem of Pb and modulate the band gap of FAPbBr3 QDs facilely. The results demonstrated that increasing the concentration of Nd³⁺ can change the emission of FAPbBr₃ QDs from pure green to deep blue. Specifically, we achieved highly pure blue emission (∼438 nm) with a full width at half maximum (FWHM) of 13 nm for Nd³⁺-doped FAPbBr₃ QDs. Time-resolved photoluminescence (TRPL) spectroscopy revealed a decrease in the lifetime of FAPbBr₃ QDs from 22.86 to 15.46 ns as the doping concentration increased. Additionally, we fabricated a white LED (WLED) utilizing blue-emitting Nd³⁺-doped FAPbBr₃, green-emitting FAPbBr₃ QDs, and red QDs, achieving a white emission color coordinate of (0.33, 0.36). This study pioneers the application of B-site rare-earth doping in organic-inorganic hybrid perovskite QDs, demonstrating that B-site composition engineering is a reliable strategy to further exploit the perovskite family for wider optoelectronic applications.

Multiple Enol-Keto Isomerization and Excited-State Unidirectional Intramolecular Proton Transfer Generate Intense, Narrowband Red OLEDs.

A novel series of excited-state intramolecular proton transfer (ESIPT) emitters, namely, DPNA, DPNA-F, and DPNA-tBu, endowed with dual intramolecular hydrogen bonds, were designed and synthesized. In the condensed phase, DPNAs exhibit unmatched absorption and emission spectral features, where the minor 0-0 absorption peak becomes a major one in the emission. Detailed spectroscopic and dynamic approaches conclude fast ground-state equilibrium among enol-enol (EE), enol-keto (EK), and keto-keto (KK) isomers. The equilibrium ratio can be fine-tuned by varying the substitutions in DPNAs. Independent of isomers and excitation wavelength, ultrafast ESIPT takes place for all DPNAs, giving solely KK tautomer emission maximized at >650 nm. The spectral temporal evolution of ESIPT was resolved by a state-of-the-art technique, namely, the transient grating photoluminescence (TGPL), where the rate of EK* → KK* is measured to be (157 fs)-1 for DPNA-tBu, while a stepwise process is resolved for EE* → EK* → KK*, with a rate of EE* → EK* of (72 fs)-1. For all DPNAs, the KK tautomer emission shows a narrowband emission with high photoluminescence quantum yields (PLQY, ∼62% for DPNA in toluene) in the red, offering advantages to fabricate deep-red organic light-emitting diodes (OLED). The resulting OLEDs give high external quantum efficiency with a spectral full width at half-maximum (FWHM) as narrow as ∼40 nm centered at 666-670 nm for DPNAs, fully satisfying the BT. 2020 standard. The unique ESIPT properties and highly intense tautomer emission with a small fwhm thus establish a benchmark for reaching red narrowband organic electroluminescence.

Aggregation Induced Emission-Based Covalent Organic Frameworks for High-Performance Optical Wireless Communication.

Here, we report the first utilization of covalent organic frameworks (COFs) in optical wireless communication (OWC) applications. In the solid form, aggregation-induced emission (AIE) luminogen often shows promising emissive characteristics that augment radiative decays and improve fluorescence. We have synthesized an AIE-COF through the Knoevenagel condensation reaction by taking advantage of the ability to carefully design and alter the COF structure by integrating an AIE luminogen with linear building blocks. The synthesized AIE-COF exhibited a high solid-state photoluminescence quantum yield (∼39%) and a short photoluminescence lifetime (∼1 ns), crucial for achieving modulation bandwidth for high-speed OWC applications. For comparison, we constructed an aggregation-caused quenching based COF, showing a similar lifetime but almost insignificant quantum yield. The orthogonal frequency-division multiplexing modulation strategy employed by the AIE-COF demonstrates remarkable high-rate data transmission, with a wide -3 dB modulation bandwidth of nearly 200 MHz and achieving high net data rates of 825 Mb/s, outperforming traditional materials. These results open new avenues for the ability to design and finetune new COF materials for their utilization as color converters in developing cutting-edge OWC components, enabling faster and more efficient data transfer.

High‐Efficiency Deep Red Fluorescent Material with Aggregation Induced Emission and the Application in Organic Light‐Emitting Diodes

AbstractThe development of highly efficient deep red materials with emission wavelength beyond 650 nm remains a big challenge due to the constraints imposed by the energy gap rule. In this work, a donor‐acceptor‐donor type emitter, 4,7‐bis (10‐(4‐(tert‐butyl) phenyl)‐10H‐phenothiazin‐3‐yl) benzo[c][1,2,5] thiadiazole (TBPPTZ) is designed and synthesized. Resulting from the slight twist angle between the donor and acceptor units, TBPPTZ exhibits nearly planar conformation and an extended conjugated structure. TBPPTZ shows a deep red emission peak at 687 nm and aggregation induced emission property with a high photoluminescence quantum yield of 45 % in neat thin film. The optimized organic light‐emitting diode (OLEDs) utilizing TBPPTZ as the non‐doped emissive layer obtains a high external quantum efficiency (EQE) up to 2.51 % with an electroluminescence (EL) peak at 676 nm, aligning with the Commission Internationale de L'Eclairage (CIE) coordinates (0.68, 0.31), which shows a small EQE roll‐off of only 5.6 % at 100 cd m−2. Additionally, the doped OLED achieves an EQE up to 5.09 %, with an EL peak at 656 nm and CIE coordinates of (0.65, 0.34). The findings of this research not only contribute to achieve highly efficient deep red OLEDs but also offer a novel and effective deep red molecular strategy to realize high‐quality OLEDs.

Incorporating Sb (III) and Bi (III) ions into Cs2AgNaInCl6 perovskite toward efficient white-light emission with high color rendering index

Single phosphor with efficient and high quality white-light emission is necessary for lighting applications. In this work, we report a double perovskite, Cs2AgNaInCl6 with Bi3+ and Sb3+ incorporation, which demonstrates excellent white-light properties including tunable emission component and correlated colour temperature (CCT). Using the broad-band emission of self-trapped excitons (STEs) associated with Bi3+ and Sb3+ in the Cs2AgNaInCl6 host, the blue and orange dual-band STEs emission located at 460 and 565 nm covers the entire visible range to achieve high-quality white light emission. The relative intensity of the dual emission components can be adjusted flexibly by modulating the doping ratio of Bi3+ and Sb3+. The dual STEs emission shares the same optimal excitation wavelength at 340 nm. The optimal sample of Bi3+ (1 %) and Sb3+ (10 %) codoped Cs2Ag0.1Na0.9InCl6 exhibits high color rendering index (CRI) of up to 93, and high photo-luminescence quantum yield (PLQY) of 76 %. This codoping in double perovskite approach represents a promising method for achieving high-quality white lighting application within a single phosphor.