High Molecular Weight Fraction Research Articles

Investigation of scaling inhibition and biofouling potential of different molecular weight fractions of a PAA antiscalant

This study investigates the scale inhibition performance of a commercial polyacrylic acid-based (PAA) antiscalant used for drinking water production and its molecular weight fractions (≤ 500 Da, ≥ 500 Da). The investigated antiscalant is used to prevent sulfate and carbonate scaling in treatment of drinking water sources by reverse osmosis or nanofiltration (RO/NF). Based on two complementary tests involving determination of induction time in a batch test and rate of flux decline in a lab-scale RO/NF plant, concordant results were obtained, proving that the overall performance of commercial PAA was controlled almost entirely by the higher molecular weight fraction. The low molecular weight fraction, which is potentially more permeable through the NF/RO membrane, showed poor inhibition against both sulfate and carbonate scalants. Furthermore, measurements on the assimilable organic carbon (AOC) by flow cytometry reveals that the low molecular weight PAA fraction has low biological stability, as its potential transport into the permeate of a NF270 nanofiltration membrane was inferred by elevated AOC values in the NF-permeate. These results are crucial information for water utilities, plant engineering, regulatory bodies and public authorities with respect to the possible operation of RO/NF especially in drinking water production.

Water-soluble compounds from Lignosus rhinocerus TM02® (xLr™) modulate ACE2 activity and inhibit its interaction with SARS-CoV-2 Spike-Protein

Water-soluble compounds from Lignosus rhinocerus TM02® (xLr™) modulate ACE2 activity and inhibit its interaction with SARS-CoV-2 Spike-Protein

Thorough Validation of Optimized Size Exclusion Chromatography-Total Organic Carbon Analysis for Natural Organic Matter in Fresh Waters.

Size exclusion chromatography with total organic carbon detection (HPSEC-TOC) is a widely employed technique for characterizing aquatic natural organic matter (NOM) into high, medium, and low molecular weight fractions. This study validates the suitability of HPSEC-TOC for a simplified yet efficient routine analysis of freshwater and its application within drinking water treatment plants. The investigation highlights key procedural considerations for optimal results and shows the importance of sample preservation by refrigeration with a maximum storage duration of two weeks. Prior to analysis, the removal of inorganic carbon is essential, which is achieved without altering the NOM composition through sample acidification to pH 6 and subsequent N2-purging. The chromatographic separation employs a preparative TSK HW-50S column to achieve a limit of detection of 19.0 µgC dm-3 with an injection volume of 1350 mm-3. The method demonstrates linearity up to 10,000 µgC dm-3. Precision, trueness and recovery assessments are conducted using certified reference materials, model compounds, and real water samples. The relative measurement uncertainty in routine analysis ranges from 3.22% to 5.17%, while the measurement uncertainty on the bias is 8.73%. Overall, the HPSEC-TOC represents a reliable tool for NOM fractions analysis in both treated and untreated ground and surface water.

Evaluation and Modeling of Polylactide Photodegradation under Ultraviolet Irradiation: Bio-Based Polyester Photolysis Mechanism.

In our study, we investigated the accelerated aging process of PLA under 253.7 nm UV-C irradiation with the use of the GPC, NMR, FTIR, and DSC methods and formal kinetic analysis. The results of GPC and DSC indicated a significant degree of destructive changes in the PLA macromolecules, while spectroscopic methods NMR and FTIR showed maintenance of the PLA main structural elements even after a long time of UV exposure. In addition to that, the GPC method displayed the formation of a high molecular weight fraction starting from 24 h of irradiation, and an increase in its content after 144 h of irradiation. It has been shown for the first time that a distinctive feature of prolonged UV exposure is the occurrence of intra- and intermolecular radical recombination reactions, leading to the formation of a high molecular weight fraction of PLA decomposition products. This causes the observed slowdown of the photolysis process. It was concluded that photolysis of PLA is a complex physicochemical process, the mechanism of which depends on morphological changes in the solid phase of the polymer under UV radiation.

Zwitterionic ring expansion polymerization of tert‐butyl glycidyl ether with B(C6F5)3 towards the generation of cyclic chains

AbstractThe synthesis of cyclic polymers via zwitterionic ring expansion polymerization is limited to a few number of monomer and catalyst pairs. Herein we report the synthesis of cyclic poly(tert‐butyl glycidyl ether) through the polymerization of tert‐butyl glycidyl ether (tBGE) with B(C6F5)3 in different reaction conditions that include different solvents, monomer to initiator ratio, monomer concentration and temperature. We found that bimodal molecular weight distribution is formed in almost all reaction conditions caused by cyclization of short chains. Subsequent chain elongation leads to the formation of cycles of higher molecular weight, particularly in cyclohexane and under bulk conditions. The formation of non‐cyclic byproducts is common in all the systems investigated. Low molecular weight cyclic chains (Mn = 0.7 kDa, Ð = 1.1) of high topological purity were successfully isolated by preparative gel permeation chromatography. By using a click scavenging protocol, the non‐cyclic byproducts were eliminated from the high molecular weight fraction (Mn = 3 kDa, Ð = 1.3) generating pure cyclic chains. Mechanistic investigation using density functional theory calculations was performed on the formation of zwitterionic intermediates and the transfer reaction to the monomer, which notably affects chain growth by the attack of the glycidyl oxygen of the monomer on the growing chain.

Distribution, chemical, and molecular composition of high and low molecular weight humic-like substances in ambient aerosols

Abstract. Humic-like substances (HULIS) encompass a continuum of molecular weight (MW) ranges, yet our understanding of how HULIS characteristics vary with MW is still limited and not well established. In this study, a combination of ultrafiltration and solid-phase extraction protocols was employed to fractionate the high MW (HMW; > 1 kDa) and low MW (LMW; < 1 kDa) HULIS fractions from ambient aerosols collected during summer and winter at a rural site. Subsequently, comprehensive characterization using total organic carbon, high-performance size exclusion chromatography (HPSEC), UV-visible (UV-vis) and fluorescence spectroscopy, Fourier transform infrared spectroscopy (FTIR), and negative electrospray ionization high-resolution mass spectrometry (ESI–HRMS) were conducted. The results revealed that HMW HULIS were dominated by larger-sized chromophores, substantially constituting a higher fraction of total organic carbon and UV absorption at 254 nm than LMW HULIS. While both HMW and LMW HULIS shared similar fluorophore types and functional groups, the former exhibited higher levels of humification and a greater presence of polar functional groups (e.g., −COOH; > C=O). HRMS analysis further unveiled that molecular formulas within HMW HULIS generally featured smaller sizes but higher degrees of unsaturation and aromaticity compared to those within LMW HULIS fractions. This observation suggests the possibility of small molecules assembling to form the HMW HULIS through intermolecular weak forces. Moreover, HMW HULIS contained a higher proportion of CHON but fewer CHO compounds than LMW HULIS. In both HMW and LMW HULIS, the unique molecular formulas were primarily characterized by lignin-like species, yet the former displayed a prevalence of N-enriched and highly aromatic species. Additionally, HMW HULIS contained more unique lipid-like compounds, while LMW HULIS exhibited a distinct presence of tannin-like compounds. These findings provide valuable insights into the distribution, optical properties, and molecular-level characteristics of HULIS in atmospheric aerosols, thereby advancing our understanding of their sources, composition, and environmental implications.

Effect of ciprofloxacin on the one-stage partial nitrification and anammox biofilm system: A multivariate analysis focusing on size-fractionated organic components

The impact of ciprofloxacin (CIP) in the partial nitrification and anammox biofilm system was investigated by multivariate analysis, focusing on size-fractionated organic components. The CIP dose of 10 μg/L did not inhibit the total nitrogen (TN) removal efficiency, even though the abundance of antibiotic resistant genes (ARGs) (i.e., qnrD, qnrB, qnrA, qnrS, and arcA) was elevated. However, a gradual higher CIP dosing up to 100 μg/L inhibited the TN removal efficiency, while the abundance of ARGs was still increased. Moreover, both the TN removal efficiency and the abundant ARGs were dwindled at 470 μg/L of CIP. As the CIP dose increased from 0 to 100 μg/L, the abundance of high molecular weight (MW) fractions (14,000 to 87,000 Da; 1000 to 14,000 Da) and humic/fulvic acid-like components in the soluble extracellular polymeric substances (HSS) decreased, with more increases of low MW (84–1000 Da; less than 84 Da) fractions and soluble microbial by-products in soluble extracellular polymeric substances (SMPS). Continuously increasing the CIP dose till 470 μg/L, an inverse trend of the changes of these organic components was noted, along with clear reductions of the microbial diversity and richness, and the abundance of key functional genes responsible for nitrogen removal. The predominance of functional gene amoA (related with ammonia oxidizing bacteria) was more significantly with more distribution of SMPS with relatively low MW and less distribution of HSS with relatively high MW, as well as polymer decomposing microorganisms such as Bryobacteraceae and the unclassified Saprospirales.

Polycyclic aromatic compounds (PACs) in industrial soils from northwestern of China: occurrence, distribution, exposure risk, and implications on risk-based controls.

Some Polycyclic Aromatic Compounds (PACs) such asnitrated-PAHs (NPAHs), oxygenated-PAHs (OPAHs) and methyl-PAHs (MPAHs) have attracted significant concern due to derivatives have greater potential to be more toxic at low environmental concentrations compared to their PPAHs, particularly in petrochemical industrial region and its surrounding areas surface soils in China.Hence, this article provides an insight into the fate, sources, impacts, and relevance to the external environment of PAH-derivatives based on important emissions source. Moreover, prospective health risk due to their exposure has also been discussed. In this study, the concentration (10-3ng/g) of Ʃ18PPAHs, Ʃ11MPAHs, Ʃ12NPAHs, and Ʃ4OPAHs in the park were 9.67 ± 1.40, 3.24 ± 0.54, 0.03 ± 0.02 and 0.19 ± 0.65, respectively, which were 4.47, 3.89, 2.04 and 1.17 times than of them surrounding the region. A decreasing trend of the low molecular weight (2-4Rings) contribution to the total amount of PAHs, while the fraction of high molecular weight (5-6Rings) species showed the opposite trend. According to the principal component analysis (PCA) and diagnostic ratios indicated PAHs in the soil samples have mixed sources from industrial activities, solid fuel combustion, and heavy traffic. Despite the high concentrations of MPAHs and OPAHs, the toxicity equivalency quotients (TEQs) of them were not calculated due to the lack of toxic equivalent factors (TEF), thus current studies on PAH and derivatives could have underestimated their exposure risks. The quality and sustainable management of soils are crucial for human health and sustainable development, while there is lack of public awareness of the severe issue of soil pollution. It is recommended to conduct more intensive monitoring and regional assessments in the future.

Changes of characteristics and disinfection by-products formation potential of intracellular organic matter with different molecular weight in metalimnetic oxygen minimum

Metalimnetic oxygen minimum (MOM) occurs in reservoirs or lakes due to stratification and algal blooms, which has low dissolved oxygen (DO) levels and leads to the deterioration of water quality. The transformation mechanism and the impact on the water quality of intracellular organic matter (IOM) derived from algae are poorly understood under MOM conditions. In this study, IOM extracted by Microcystis aeruginosa was divided into five components according to molecular weight (MW), and the changes of characteristics and correlated disinfection by-products formation potential (DBPFP) were analyzed and compared under MOM conditions. The removal efficiency of dissolved organic carbon (DOC) in the <5 kDa fraction (66.6%) was higher than that in the >100 kDa fraction (41.8%) after a 14-day incubation under MOM conditions. The same tendency also occurred in Fmax and DBPFP. The decrease in Fmax was mainly due to the decline in tryptophan-like and tyrosine-like for all IOM fractions. The diversity of microorganisms degrading the MW > 100 kDa fraction was lower than others. Besides low MW fractions, these findings indicated that more attention should be paid to high MW fractions which were resistant to biodegradation under MOM conditions during water treatment.

Influences of dissolved organic matters on the adsorption and bioavailability of sulfadiazine: Molecular weight- and type-dependent heterogeneities

The bioavailability of contaminants in aquatic environments was highly related with the existing forms (soluble or adsorbed) and properties of dissolved organic matters (DOMs). In this study, the molecular weight (MWs)-dependent effects of DOMs on the adsorption and bioavailability of sulfadiazine were explored. Colloid ZnO and Al2O3 were employed as the representative colloidal particles, and algae-derived organic matter (AOM) and humic acid (HA) were selected as typical autochthonous and allochthonous DOMs. The ultrafiltration procedure was applied to divide the bulk DOMs into high MW (HMW-, 1 kDã0.45 μm) and low MW (LMW-, <1 kDa) fractions. Results showed that HMW-DOM contained more aromatic and protein-like substances as compared to the LMW counterparts. In addition, presence of AOM promoted sulfadiazine adsorption capabilities by 1.19–4.54 folds and mitigated the inhibition ratio by 0.56–0.78 folds, whereas those of HA inhibited sulfadiazine adsorption by 0.27–0.84 folds and enhanced the biotoxicity by 1.21–1.45 folds. Regardless of different DOM types, HMW-fraction exhibited highest effects on sulfadiazine adsorption and bioavailability, followed by the bulk- and LMW-fractions. Two-dimensional correlation spectroscopy showed that sulfadiazine was adsorbed on colloidal surfaces prior to AOM, and the subsequent adsorption of AOM can provide additional sites for sulfadiazine adsorption, which decreased the concentrations of aqueous sulfadiazine as well as the biotoxicity to Microcystis aeruginosa (M. aeruginosa). The HA, however, was preferentially adsorbed on colloidal surfaces, which hindered the subsequent sulfadiazine adsorption and resulted in a high sulfadiazine abundance in aqueous solution as well as the enhanced biotoxicity to M. aeruginosa. This study highlighted the importance of the types and MWs of DOMs in influencing the behaviors and ecological effects of aquatic contaminants.

Influence of algal organic matter in the in-situ flotation removal of Microcystis using positively charged bubbles

Positively charged bubbles efficiently capture and remove negatively charged algal cells without relying on coagulation-flocculation. However, the efficiency is notably influenced by the presence of algal organic matter (AOM). This study investigated the impact of AOM composition on flotation performance by analyzing AOM from various growth phases of Microcystis flos-aquae. The results indicated that low-concentration AOM (<5 mg C L-1), particularly the high molecular weight (>30 kDa) fractions containing high percentages of protein during the exponential growth phase, significantly improved the flotation efficiency by >18%. A high-speed camera system illustrates the pivotal role of low-concentration protein-containing AOM in forming network structures that enhance cell capture. These protein-driven network structures, which enhance the flotation efficiency, provide valuable insights into the development of effective in-situ algal bloom prevention techniques.

Surface-enhanced Raman spectroscopy of the filtrate portions of the blood serum samples of breast cancer patients obtained by using 30 kDa filtration device

Raman spectroscopy is reliable tool for analyzing and exploring early disease diagnosis related to body fluids, such as blood serum, which contain low molecular weight fraction (LMWF) and high molecular weight fraction (HMWF) proteins. The disease biomarkers consist of LMWF which are dominated by HMWF hence their analysis is difficult. In this study, in order to overcome this issue, centrifugal filter devices of 30 kDa were used to obtain filtrate and residue portions obtained from whole blood serum samples of control and breast cancer diagnosed patients. The filtrate portions obtained in this way are expected to contain the marker proteins of breast cancer of the size below this filter size. These may include prolactin, Microphage migration inhabitation factor (MIF), γ-Synuclein, BCSG1, Leptin, MUC1, RS/DJ-1 present in the centrifuged blood serum (filtrate portions) which are then analyzed by the SERS technique to recognize the SERS spectral characteristics associated with the progression of breast cancer in the samples of different stages as compared to the healthy ones. The key intention of this study is to achieve early-stage breast cancer diagnosis through the utilization of Surface Enhanced Raman Spectroscopy (SERS) after the centrifugation of healthy and breast cancer serum samples with Amicon ultra-filter devices of 30 kDa. The silver nanoparticles with high plasmon resonance are used as a substrate for SERS analysis. Principal Component Analysis (PCA) and Partial Least Discriminant Analysis (PLS-DA) models are utilized as spectral classification tools to assess and predict rapid, reliable, and non-destructive SERS-based analysis. Notably, they were particularly effective in distinguishing between different SERS spectral groups of the cancerous and non-cancerous samples. By comparing all these spectral data sets to each other PLSDA shows the 79 % accuracy, 76 % specificity, and 81 % sensitivity in samples with AUC value of AUC = 0.774 SERS has proven to be a valuable technique for the rapid identification of the SERS spectral features of blood serum and its filtrate fractions from both healthy individuals and those with breast cancer, aiding in disease diagnosis.

Chemical Characterization of Red Wine Polymers and Their Interaction Affinity with Odorants.

In order to characterize red wine polymers with regard to their binding properties to aroma compounds (odorants), a qualitative and quantitative analysis of chemical degradation products after different chemical treatments (thiolytic, acidic, and alkaline depolymerization) of high -molecular-weight (HMW) fractions of red wine was performed. Using 1H NMR, LC-ToF-MS, LC-MS/MS, and HPIC revealed key structural features such as carbohydrates, organic acids, phenolic compounds, anthocyanins, anthocyanidins, amino acids, and flavan-3-ols responsible for odorant-polymer interactions. Further, NMR-based interaction studies of the selected aroma compounds 3-methylbutanol, cis-whisky lactone, 3-methylbutanoic acid, and 3-isobutyl-2-methoxypyrazine with HMW polymers after chemical treatment demonstrated a reduced interaction affinity of the polymer compared to the native HMW fractions, and further, the importance of aromatic compounds such as flavan-3-ols for the formation of odorant polymer interactions. In addition, these observations could be verified by human sensory experiments. For the first time, the combination of a compositional analysis of red wine polymers and NMR-based interaction studies with chemically treated HMW fractions enabled the direct analysis of the correlation of the polymer's structure and its interaction affinity with key odorants in red wine.

Phase Behavior and Phase Equilibria for The Polydisperse Polyethylene + Ethylene + Hexane System at High Pressures and Temperature: Experiments and Correlations

This study aims to provide experimental phase equilibrium and phase behavior data for polydisperse PE + ethylene + hexane system. Polydisperse PE (Mw 30.0 kg/mol, PDI 4.2) was used with feed PE weight fraction, ⱳF,PE, of 0.02 to 0.20. The experiments based on a synthetic method were conducted at 473.2 K using an apparatus consisted of an equilibrium cell equipped with sampling tubes for solvent-rich and polymer-rich phases. The LL phase separation pressure increased by about 1 MPa for 1 wt% increase in ethylene concentration. The weight fraction of PE in solvent-rich phase, ⱳS,PE, decreased as the ⱳF,PE and pressure decreased. Similarly, the weight fraction of PE in polymer-rich phase, ⱳP,PE, also decreased as the ⱳF,PE decreased. The solvent-rich phase contained lower molecular weight fractions of PE, while the polymer-rich phase contained higher molecular weight fractions. These results were correlated and predicted with the Sanchez-Lacombe (S-L) EoS. Finally, the effects of pressure and ⱳF,PEon solvent recovery ratio were investigated with the S-L EoS. The results provided in this study could be used to obtain the higher hexane recovery by controlling the LL separation pressure.

A comparison of typical ultrafiltration processes in drinking water treatment: Implications for fouling control and disinfection performance

Despite the rapid proliferation of ultrafiltration (UF) membranes in drinking water treatment, the long-term operational performance of various hybrid UF processes remains inadequately understood. Herein, three typically applied hybrid UF processes were directly compared on a pilot scale, focusing on effluent quality, fouling control and subsequent disinfection performance. Water quality analysis revealed that the direct UF process exhibited significant removal of high molecular weight and hydrophobicity fractions, while the integration of UF with conventional water treatment processes further enhanced the removal of medium molecular weight and transition fractions, as well as fluorescent organic matter. The augmentation of pretreatment processes resulted in the hybrid UF process featuring enhanced anti-fouling properties, characterized by decreased reversible and irreversible resistances under the constant flux condition. This improvement was attributed to reduced interaction between the membrane and foulants. Furthermore, the subsequent disinfection performance of hybrid UF processes was evaluated using chlorine and chlorine dioxide as disinfectants. The chlorine decay rate and disinfection by-product formation indicated that chlorine dioxide was more suitable for the UF process, whereas chlorine was better for the hybrid UF process with low organic matter content in the effluent. These comprehensive comparisons offer valuable insights for making informed decisions in adopting suitable hybrid UF processes for practical water treatment applications.

Anionic extracellular polymeric substances extracted from seawater-adapted aerobic granular sludge.

Anionic polymers, such as heparin, have been widely applied in the chemical and medical fields, particularly for binding proteins (e.g., fibroblast growth factor 2 (FGF-2) and histones). However, the current animal-based production of heparin brings great risks, including resource shortages and product contamination. Recently, anionic compounds, nonulosonic acids (NulOs), and sulfated glycoconjugates were discovered in the extracellular polymeric substances (EPS) of aerobic granular sludge (AGS). Given the prevalence of anionic polymers, in marine biofilms, it was hypothesized that the EPS from AGS grown under seawater condition could serve as a raw material for producing the alternatives to heparin. This study aimed to isolate and enrich the anionic fractions of EPS and evaluate their potential application in the chemical and medical fields. The AGS was grown in a lab-scale reactor fed with acetate, under the seawater condition (35 g/L sea salt). The EPS was extracted with an alkaline solution at 80 °C and fractionated by size exclusion chromatography. Its protein binding capacity was evaluated by native gel electrophoresis. It was found that the two highest molecular weight fractions (438- > 14,320 kDa) were enriched with NulO and sulfate-containing glycoconjugates. The enriched fractions can strongly bind the two histones involved in sepsis and a model protein used for purification by heparin-column. These findings demonstrated possibilities for the application of the extracted EPS and open up a novel strategy for resource recovery. KEY POINTS: • High MW EPS from seawater-adapted AGS are dominant with sulfated groups and NulOs • Fifty-eight percent of the EPS is high MW of 68-14,320 kDa • EPS and its fractions can bind histones and fibroblast growth factor 2.

Surface-enhanced Raman spectroscopy for characterization of filtrates of blood serum samples from patients with tuberculosis obtained by 50 kDa filtration devices.

The ability of surface-enhanced Raman spectroscopy (SERS) to generate spectroscopic fingerprints has made it an emerging tool for biomedical applications. The objective of this study is to confirm the potential use of Raman spectroscopy for early disease diagnosis based on blood serum. In this study, a total of sixty blood serum samples, consisting of forty from diseased patients and twenty (controls) from healthy individuals, was used. Because disease biomarkers, found in the lower molecular weight fraction, are suppressed by higher molecular weight proteins, 50 kDa Amicon ultrafiltration centrifugation devices were used to produce two fractions from whole blood serum consisting of a filtrate, which is a low molecular weight fraction, and a residue, which is a high molecular weight fraction. These fractions were then analyzed, and their SERS spectral data were compared with those of healthy fractions. The SERS technique was utilized on blood serum, filtrate and residue of patients with tuberculosis to identify characteristic SERS spectral features associated with the development of disease, which can be used to differentiate them from healthy samples using silver nanoparticles as a SERS substrate. For further analysis, the effective chemometric technique of principal component analysis (PCA) was used to qualitatively differentiate all the analyzed samples based on their SERS spectral features. Partial least squares discriminant analysis (PLS-DA) accurately classified the filtrate portions of healthy and tuberculosis samples with 97% accuracy, 97% specificity, 98% sensitivity, and an area under the receiver operating characteristic (AUROC) curve of 0.74.

Unraveling the mystery: Extraction and component analysis of irrecoverable foulants of end-of-life membrane from large-scale MBR

Membrane bioreactors (MBRs) are increasingly employed in municipal wastewater treatment, with membranes inevitably reaching their end-of-life (EOL) primarily due to the accumulation of irrecoverable fouling. Nevertheless, the composition and properties of irrecoverable fouling remain ambiguous due to the lack of appropriate extraction and analytical methods. Herein, we developed a temperature-regulated organic solvent extraction method to extract and analyze irrecoverable foulants in EOL ultrafiltration membranes at various locations within a large-scale MBR for municipal wastewater treatment. The irrecoverable foulants encompassed a high molecular weight fraction not observed in the influent, potentially induced by aggregation from organic-inorganic foulant interaction. The terrestrial humic acid (HA)-like substance dominated the organic components of irrecoverable foulants, and the chelating cation Ca emerged as a dominant inorganic compound. Unexpectedly, we noticed the enrichment of Al, Fe, and Si in the irrecoverable fouling, despite their relatively low rejections by the EOL membrane. The potential complex interactions among HA-like substances, Ca, Al, Fe, and Si were revealed by correlation and cluster analysis. The strong bridging potentials of [Al(OH)4]-, Fe(OH)3 at neutral pH, coupled with the colloidal property of Si, may facilitate the aggregation of organic and inorganic compounds, forming complex irrecoverable foulants with strong affinity for the membrane matrix. Besides, the irrecoverable fouling exhibited an increasing trend along the water flow direction. The mystery of irrecoverable fouling of EOL membrane was, for the first time, systematically unraveled, establishing a foundation for the development of effective membrane cleaning and regeneration technology.

Long-lasting flavor compounds of myrtle and immortelle from ancient Egyptian tombs: A study by analytical pyrolysis

In this work, an approach based on evolved gas analysis-mass spectrometry and double-shot analytical pyrolysis-gas chromatography-mass spectrometry was employed to investigate the low and high molecular weight fractions of two aromatic plants, myrtle and immortelle. The method was used to investigate myrtle and immortelle plants from historical herbaria, as well as archaeological samples from garlands found in ancient Egyptian tombs. Analytical pyrolysis allowed us to characterize both the volatile and non-volatile fractions, by sequentially performing a thermal desorption step and a pyrolysis step on the same sample. Volatile components ascribable to the flavor of myrtle and immortelle were detected in the first-shot chromatograms of all samples. These compounds included mono/sesquiterpenoids such as pinene and eucalyptol, and small phenols such as catechol and syringol. The results show that a portion of the volatile compounds of these plants can remain trapped in the lignocellulosic matrix for long times, and that double-shot Py-GC/MS can provide information on the volatile fraction of even archaeological plant samples.

NMR-Based Studies on Odorant Polymer Interactions and the Influence on the Aroma Perception of Red Wine.

The aroma of red wine is suggested to be influenced by interactions with nonvolatile polymers. To investigate this aroma binding effect in red wine, the key aroma compounds of a Primitivo red wine were quantified using GC-MS and an aroma recombinant with 27 odorants was prepared. In sensory experiments, an overall strong effect on the odor perception of the aroma recombinant was observed when high-molecular-weight (HMW) polymers of Primitivo red wine were added. An 1H NMR-based approach was developed to get an insight into the molecular mechanisms of this aroma binding effect in red wine. Evaluation of qualitative changes in the NMR spectra and quantitative time-dependent measurements revealed a clear distinction between different molecular interaction types: (i) no interactions for esters, alcohols, furanones, ketones, and C13-norisoprenoids, (ii, iii) noncovalent interactions for acids, aldehydes, and lactones, and (iv) π-π interactions for pyrazines and phenols. Additionally, the influence of the molecular weight of polymers was evaluated, where the HMW fraction 30-50 kDa showed the highest interaction activity, for example for π-π interactions. Based on these results, the new approach allowed the direct analysis of noncovalent interactions between odorants and HMW polymers and therefore allowed for the first time the description of the aroma binding effect on a molecular basis.