High Enzyme Loading Research Articles

Facile and scale-up syntheses of high-performance enzyme@meso-HOF biocatalysts.

Facile immobilization is essential for the wide application of enzymes in large-scale catalytic processes. However, exploration of suitable enzyme supports poses an unmet challenge, particularly in the context of scale-up biocatalyst fabrication. In this study, we present facile and scale-up syntheses of high-performance enzyme biocatalysts via in situ encapsulation of cytochrome c (Cyt-c) as mono-enzyme and glucose oxidase (GOx)-horseradish peroxidase (HRP) as dual-enzyme cascade (GOx&HRP) systems, respectively, into a stable mesoporous hydrogen-bonded organic framework (meso-HOF) matrix. In situ encapsulation reactions occur under ambient conditions, and facilitate scale up (∼3 g per reaction) of enzyme@meso-HOF within a very short period (5-10 min). The resultant biocatalysts not only exhibit high enzyme loading (37.9 wt% for mono-enzyme and 22.8 wt% for dual-enzyme) with minimal leaching, but also demonstrate high catalytic activity, superior reusability, and durability. This study represents an example of scale-up fabrication of enzyme@meso-HOF biocatalysts on the gram level and highlights superior meso-HOFs as suitable host matrices for biomolecular entities.

Supercharged cellulases show superior thermal stability and enhanced activity towards pretreated biomass and cellulose

Non-productive binding of cellulolytic enzymes to various plant cell wall components, such as lignin and cellulose, necessitates high enzyme loadings to achieve efficient conversion of pretreated lignocellulosic biomass to fermentable sugars. Protein supercharging was previously employed as one of the strategies to reduce non-productive binding to biomass. However, various questions remain unanswered regarding the hydrolysis kinetics of supercharged enzymes towards pretreated biomass substrates and the role played by enzyme interactions with individual cell wall polymers such as cellulose and xylan. In this study, CBM2a (from Thermobifida fusca) fused with endocellulase Cel5A (from T. fusca) was used as the model wild-type enzyme and CBM2a was supercharged using Rosetta, to obtain eight variants with net charges spanning −14 to +6. These enzymes were recombinantly expressed in E. coli, purified from cell lysates, and their hydrolytic activities were tested against pretreated biomass substrates (AFEX and EA treated corn stover). Although the wild-type enzyme showed greater activity compared to both negatively and positively supercharged enzymes towards pretreated biomass, thermal denaturation assays identified two negatively supercharged constructs that perform better than the wild-type enzyme (∼3 to 4-fold difference in activity) upon thermal deactivation at higher temperatures. To better understand the causal factor of reduced supercharged enzyme activity towards AFEX corn stover, we performed hydrolysis assays on cellulose-I/xylan/pNPC, lignin inhibition assays, and thermal stability assays. Altogether, these assays showed that the negatively supercharged mutants were highly impacted by reduced activity towards xylan whereas the positively supercharged mutants showed dramatically reduced activity towards cellulose and xylan. It was identified that a combination of impaired cellulose binding and lower thermal stability was the cause of reduced hydrolytic activity of positively supercharged enzyme sub-group. Overall, this study demonstrated a systematic approach to investigate the behavior of supercharged enzymes and identified supercharged enzyme constructs that show superior activity at elevated temperatures. Future work will address the impact of parameters such as pH, salt concentration, and assay temperature on the hydrolytic activity and thermal stability of supercharged enzymes.

Tuning Structural Characteristics of Corn Stover Through Ammonium and Sodium Sulfite (ASS) Pretreatment for Enhanced Enzymatic Hydrolysis.

The ammonia fiber expansion (AFEX) pretreatment of lignocellulosic biomass offers a significant advantage in terms of obtaining high glucan conversion, with the added benefit of ammonia being fully recyclable. However, despite the high efficiency of AFEX in pretreating lignocellulose, relatively high enzyme loading is still required for effective cellulose conversions. In this study, we have updated the AFEX pretreatment method; ammonia and sodium sulfite (ASS) can be used to produce a more digestible substrate. The results demonstrate that ASS-pretreated corn stover (CS) yields a higher fermentable sugar yield compared with AFEX pretreatment, even at lower enzyme loadings. Specifically, at an enzyme loading of 12 mg protein/g glucan, ASS-CS achieved 88.8% glucose and 80.6% xylose yield. Characterization analysis reveals that lignin underwent sulfonation during ASS pretreatment. This modification results in a more negative zeta potential for ASS-CS, indicating a reduction in nonproductive adsorption between lignin and cellulase through increased electrostatic repulsion.

Alloyed Trimetallic Nanocomposite as an Efficient and Recyclable Solid Matrix for Ideonella sakaiensis Lipase Immobilization.

In this work, a trimetallic (Ni/Co/Zn) organic framework (tMOF), synthesized by a solvothermal method, was calcinated at 400 and 600 °C and the final products were used as a support for lipase immobilization. The material annealed at 400 °C (Ni-Co-Zn@400) had an improved surface area (66.01 m2/g) and pore volume (0.194 cm3/g), which showed the highest enzyme loading capacity (301 mg/g) with a specific activity of 0.196 U/mg, and could protect the enzyme against thermal denaturation at 65 °C. The optimal pH and temperature for the lipase were 8.0 and 45 °C but could tolerate pH levels 7.0-8.0 and temperatures 40-60 °C. Moreover, the immobilized enzyme (Ni-Co-Zn@Lipase, Ni-Co-Zn@400@Lipase, or Ni-Co-Zn@600@Lipase) could be recovered and reused for over seven cycles maintaining 80, 90, and 11% of its original activity and maintained a residual activity >90% after 40 storage days. The remarkable thermostability and storage stability of the immobilized lipase suggest that the rigid structure of the support acted as a protective shield against denaturation, while the improved pH tolerance toward the alkaline range indicates a shift in the ionization state attributed to unequal partitioning of hydroxyl and hydrogen ions within the microenvironment of the active site, suggesting that acidic residues may have been involved in forming an enzyme-support bond. The high enzyme loading capacity, specific activity, encouraging stability, and high recoverability of the tMOF@Lipase indicate that a multimetallic MOF could be a better platform for efficient enzyme immobilization.

A novel photo-enzyme platform based on non-metallic modified carbon nitride for removal of bisphenol A in water

A nonmetallic composite photocatalyst with 2D/2D structure was prepared by hydrothermal in-situ polymerization and used for the immobilization of cytochrome C (Cyt c). The photo-enzyme coupling system has a very high enzyme load, which can reach 528.29 mg g−1 after optimization. Compared with free Cyt c, Cytc/PEDOT/CN showed better enzymatic activity, stability and catalytic efficiency. Even after being stored at 100 °C for 60 min, the enzyme activity remained at 49.42 % and remained at 57.89 % after 8 cycles. Moreover, Cytc0.5/PEDOT3/CN showed excellent photocatalytic degradation performance in the degradation experiment of bisphenol A (BPA), reaching 68.22 % degradation rate within 60 min, which was 3.9 times higher than that of pure g-C3N4 and 1.61 times higher than that of pure PEDOT3/CN. This study shows that the introduction of conductive polymers is of great significance to the photo-enzyme coupling system and provides a new strategy for the treatment of phenol-containing wastewater.

Electrostatically Mediated In Situ Polymerization for Enzyme Immobilization and Activation.

Enzyme immobilization in nanoparticles is of interest for boosting their catalytic applications, yet rational approaches to designs achieving both high enzyme loading and activation remain a challenge. Herein, we report an electrostatically mediated in situ polymerization strategy that simultaneously realizes enzyme immobilization and activation. This was achieved by copolymerizing cationic monomers with a cross-linker in the presence of the enzyme lipase (anionic) as the template, which produces enzyme-loaded nanogels. The effects of different control factors such as pH, lipase dosage, and cross-linker fraction on nanogel formation are investigated systematically, and optimal conditions for enzyme loading and activation have been determined. A central finding is that the cationic polymer network of the nanogel creates a favorable environment that not only protects the enzyme but also boosts enzymatic activity nearly 2-fold as compared to free lipase. The nanogels improve the stability of the lipase to tolerate a broader working range of pH (5.5-8.5) and temperature (25-70 °C) and allow recycling such that after six cycles of reaction, 70% of the initial activity is conserved. The established fabrication strategy can be applied generally to different cationic monomers, and most of these nanogels exhibit adequate immobilization and activation of lipase. Our study confirms that in situ polymerization based on electrostatic interaction provides a facile and robust strategy for enzyme immobilization and activation. The wide variety of ionic monomers, therefore, features great potential for developing functional platforms toward satisfying enzyme immobilization and demanding applications.

Enhancing protein stability under stress: osmolyte-based deep eutectic solvents as a biocompatible and robust stabilizing medium for lysozyme under heat and cold shock.

In biomedical and biotechnological domains, liquid protein formulations are vital tools, offering versatility across various fields. However, maintaining protein stability in a liquid form presents challenges due to environmental factors, driving research to refine formulations for broader applications. In our recent study, we investigated the relationship between deep eutectic solvents (DESs) and the natural presence of osmolytes in specific combinations, showcasing the effectiveness of a bioinspired osmolyte-based DES in stabilizing a model protein. Recognizing the need for a more nuanced understanding of osmolyte-based DES stabilization capabilities under different storage conditions, here we broadened the scope of our osmolyte-based DES experimental screening, and delved deeper into structural changes in the enzyme under these conditions. We subjected lysozyme solutions in DESs based on various kosmotropic osmolytes (TMAO, betaine, sarcosine, DMSP, ectoine, GPC, proline, sorbitol and taurine) paired either with another kosmotropic (glycerol) or with chaotropic osmolyte urea to rigorous conditions: heat shock (at 80 °C) and repetitive freeze-thaw cycles (at -20 and -80 °C). Changes in enzyme activity, colloidal stability, and conformational alterations were then monitored using bioassays, aggregation tests, and spectroscopic techniques (FT-IR and CD). Our results demonstrate the remarkable effectiveness of osmolyte-based DES in stabilizing lysozyme under stress conditions, with sarcosine- and betaine-based DESs containing glycerol as a hydrogen bond donor showing the highest efficacy, even at high enzyme loadings up to 200 mg ml-1. Investigation of the individual and combined effects of the DES components on enzyme stability confirmed the synergistic behavior of the kosmotrope-urea mixtures and the cumulative effects in kosmotrope-glycerol mixtures. Additionally, we have shown that the interplay between the enzyme's active and stable (but inactive) states is highly influenced by the water content in DESs. Finally, toxicity assessments of osmolyte-based DESs using cell lines (Caco-2, HaCaT, and HeLa) revealed no risks to human health.

Sensitive fluorescence ELISA for the detection of zearalenone based on self-assembly DNA nanocomposites and copper nanoclusters.

Zearalenone (ZEN), produced by Fusarium species, is a potential risk to human health. Traditional enzyme-linked immunosorbent assay (ELISA) is restricted due to low sensitivity for the detection of ZEN. Herein, enzyme nanocomposites (ALP-SA-Bio-ssDNA, ASBD) were prepared with the self-assembly strategy based on streptavidin-labeled alkaline phosphatase (SA-ALP) and dual-biotinylated ssDNA (B2-ssDNA). The enzyme nanocomposites improved the loading amount of ALP and catalyzed more ascorbic acid 2-phosphate to generate ascorbic acid (AA). Subsequently, Cu2+ could be reduced to copper nanoclusters (CuNCs) having strong fluorescence signal by AA with poly T. Benefiting from the high enzyme load of nanocomposites and the strong signal of CuNCs, the fluorescence ELISA was successfully established for the detection of ZEN. The proposed method exhibited lower limit of detection (0.26ngmL-1) than traditional ELISA (1.55ngmL-1). The recovery rates ranged from 92.00% to 108.38% (coefficient of variation < 9.50%) for the detection of zearalenone in corn and wheat samples. In addition, the proposed method exhibited no cross reaction with four other mycotoxins. This proposed method could be used in trace detection for food safety.

Highly active and recyclable immobilized multiple enzymes for one-pot enantioselective cascade reactions: Synthesis of (R)- and (S)-α-amino acids from racemic α-hydroxy acids

Cascade biotransformation of racemic alcohols to enantiopure amines is highly wanted in pharmaceutical manufacturing but requires green and efficient solution. Here we developed the first immobilized enzyme-based approach for this transformation, being cleaner and more productive than whole-cells biocatalysis, and more economic and higher-yielding than using isolated enzymes. As demonstration, the conversion of racemic mandelic acids to high-value (R)- or (S)-phenylglycines was achieved by immobilized enantioselective alcohol oxidase, racemase, catalase, and (S)- or (R)-transaminase. Co-immobilization of the four enzymes on Ni-NTA functionalised carriers gave high enzyme loadings (192–195 mg enzyme/g carrier), loading efficiencies (97–98%), and free enzyme activities (107–113%). Immobilized enzymes transformed racemic mandelic acids to the corresponding four (S)-phenylglycines in 91–99% ee and 82–95% yields or five (R)-phenylglycines in 93–99% ee and 83–94% yields. These catalysts showed good recyclability, retaining 86–98% productivities in the fifth reaction cycles.

Enzyme-immobilized hierarchically porous covalent organic framework biocomposite for catalytic degradation of broad-range emerging pollutants in water

Efficient enzyme immobilization is crucial for the successful commercialization of large-scale enzymatic water treatment. However, issues such as lack of high enzyme loading coupled with enzyme leaching present challenges for the widespread adoption of immobilized enzyme systems. The present study describes the development and bioremediation application of an enzyme biocomposite employing a cationic macrocycle-based covalent organic framework (COF) with hierarchical porosity for the immobilization of horseradish peroxidase (HRP). The intrinsic hierarchical porous features of the azacalix[4]arene-based COF (ACA-COF) allowed for a maximum HRP loading capacity of 0.76 mg/mg COF with low enzyme leaching (<5.0 %). The biocomposite, HRP@ACA-COF, exhibited exceptional thermal stability (∼200 % higher relative activity than the free enzyme), and maintained ∼60 % enzyme activity after five cycles. LCMSMS analyses confirmed that the HRP@ACA-COF system was able to achieve > 99 % degradation of seven diverse types of emerging pollutants (2-mercaptobenzothiazole, paracetamol, caffeic acid, methylparaben, furosemide, sulfamethoxazole, and salicylic acid)in under an hour. The described enzyme-COF system offers promise for efficient wastewater bioremediation applications.

Hollow Prussian blue with ultrafine silver nanoparticle agents (Ag-HPB) integrated sensitive and flexible biosensing platform with highly enzyme loading capability

Herein, the hollow Prussian blue with ultra-small silver nanoparticle agents (Ag-HPB) was prepared by the coating-etching method by applying Prussian blue (PB) coating on Ag nanoparticles (Ag NPs) and diffusing Ag NPs into the PB framework. The flexible biosensing platform based on Ag-HPB nanocomposites incorporated the excellent electrical conductivity of Ag NPs and the superior enzyme loading capacity of the hollow structure, which significantly enhanced its sensing performance. Subsequently, take glucose oxidase (GOx) and acetylcholinesterase (AChE) as examples. The sensing platform displayed a good sensitive response to glucose (Glu) (24.37 μA mM−1 cm−2) and a considerable limit of detection (LOD) for trichlorfon (TCF) as 2.28 pg/mL while exhibiting high stability and good reproducibility. Moreover, it can be applied to monitor trichlorfon in apple samples. Promisingly, the Ag-HPB prepared by the coating-etching strategy provides a reliable strategy for further development of sensitive and flexible biosensing platforms with excellent electrical conductivity and high enzyme loading.

Peptide self‐assembly as a strategy for facile immobilization of redox enzymes on carbon electrodes

AbstractRedox–enzyme‐mediated electrochemical processes such as hydrogen production, nitrogen fixation, and CO2 reduction are at the forefront of the green chemistry revolution. To scale up, the inefficient two‐dimensional (2D) immobilization of redox enzymes on working electrodes must be replaced by an efficient dense 3D system. Fabrication of 3D electrodes was demonstrated by embedding enzymes in polymer matrices. However, several requirements, such as simple immobilization, prolonged stability, and resistance to enzyme leakage, still need to be addressed. The study presented here aims to overcome these gaps by immobilizing enzymes in a supramolecular hydrogel formed by the self‐assembly of the peptide hydrogelator fluorenylmethyloxycarbonyl‐diphenylalanine. Harnessing the self‐assembly process avoids the need for tedious and potentially harmful chemistry, allowing the rapid loading of enzymes on a 3D electrode under mild conditions. Using the [FeFe] hydrogenase enzyme, high enzyme loads, prolonged resistance against electrophoresis, and highly efficient hydrogen production are demonstrated. Further, this enzyme retention is shown to arise from its interaction with the peptide nanofibrils. Finally, this method is successfully used to retain other redox enzymes, paving the way for a variety of enzyme‐mediated electrochemical applications.

In situ and layer-by-layer immobilization of ternary enzyme cascades based on CaCO3 microspheres

The efficiency of multi-enzyme immobilization is often influenced by the carrier and immobilization techniques employed. In this work, we proposed a ternary enzyme cascade reaction system composed of β-glucosidase (β-G), glucose oxidase (GOD) and horseradish peroxidase (HRP). CaCO3 microspheres served as a template for in situ immobilization, while poly (allylamine hydrochloride) (PAH) and sodium poly (4-styrene sulfonate) (PSS) were utilized to create PAH-CaCO3 and PSS-CaCO3 templates for layer-by-layer multi-enzyme immobilization. The effects of template structure, glutaraldehyde (GA) addition, ethylenediaminetetraacetic acid (EDTA) concentration, and the structure of layer-by-layer assembly were systematically investigated. Our results indicated that an assembly of PSS-CaCO3--PAH--β-G--HRP--GOD presented simultaneous high enzyme loading and relative activity. The loadings of β-G, GOD and HRP were 75.2 ± 2.0%, 87.7 ± 4.4% and 85.5 ± 3.2%, respectively, while the relative activities were 81.8 ± 2.7%, 93.6 ± 4.7% and 90.6 ± 3.1%, respectively. Kinetic parameters confirmed that the reaction rate of the immobilized ternary enzymes in this assembly was close to that of the free enzymes. This work provides insights for constructing other multi-enzyme cascade reaction systems using immobilization techniques.

Improving the Encapsulation Efficiency of Lipase in Molecular Cages and Its Application.

Here, lipase encapsulation is constructed by locking enzyme molecules in nanomolecular cages on the surface of SH-PEI@PVAC magnetic microspheres. To improve the encapsulation efficiency in enzyme loading, the thiol group is efficiently modified on the grafted polyethyleneimine (PEI) using 3-mercaptopropionic acid. N2 adsorption-desorption isotherms reveal the existence of mesoporous molecular cages on the microsphere surface. The robust immobilizing strength of carriers to lipase demonstrates the successful encapsulation of enzymes in nanomolecular cages. The encapsulated lipase shows high enzyme loading (52.9 mg/g) and high activity (51.4 U/mg). Different sizes of molecular cages are established, and the cage size showed important effects on lipase encapsulation. It shows that enzyme loading is low at a small size of molecular cages, which is attributed to that the nanomolecular cage is too small to house lipase. The investigation in lipase conformation suggests that the encapsulated lipase retains its active conformation. Compared with the adsorbed lipase, the encapsulated lipase shows higher thermal stability (4.9 times) and higher resistance to denaturants (5.0 times). Encouragingly, the encapsulated lipase shows high activity and reusability in lipase-catalyzed synthesis of propyl laurate, suggesting the potential application value of encapsulated lipase.

A reusable and leakage-proof immobilized laccase@UiO-66-NH2(30) for the efficient biodegradation of rifampicin and lincomycin

The enzyme leakage in physical adsorption dramatically limits the application of immobilized laccase (Lac) in environmental treatment. Therefore, a leakage-proof Zr-based metal-organic framework (MOF) carrier, UiO-66-NH2(30), was constructed for the stable loading of Lac and efficient antibiotic biodegradation, which could fix the Lac inside the carrier rather than only adsorbed on the surface. Based on the aperture modulation strategy, the pore size distribution of MOFs at about 10 nm was significantly increased to match the diameter of Lac (7.6 nm), by which Lac@UiO-66-NH2(30) was successfully prepared with a high enzyme loading amount (275.96 mg/g) and high enzyme recovery (618 %). The immobilized Lac@UiO-66-NH2(30) could nearly 100 % biodegrade rifampicin and lincomycin in 6 min and 6 h, respectively, and after 8 times reuse, the degradation rates of antibiotics remained at 81.46 % and 76.12 %, which showed excellent reusability and stability. Overall, Lac@UiO-66-NH2(30) is expected to be an ideal candidate for pollution control.

A photo-enzyme coupling catalysis system with high enzyme loading for the efficient degradation of BPA in water

The structural limitation of the photocatalyst itself is the main reason for the difficulty in increasing the enzyme loading amount in the photo-enzyme coupling system. Hereon, a g-C3N4-based photocatalyst ACN45 with high enzyme loading amount was synthesized. Abundant 5 nm channels match well with the size of horseradish peroxidase (HRP) molecules, which enables the loading amount to reach 6.3 times that of pure g-C3N4. Meanwhile, the microenvironment provided by channels of ACN45 significantly improves the activity and stability of the immobilized enzyme, and reduces the leaching of the enzyme molecules inside it. The internal immobilization of HRP did not affect the absorption of visible light by the photocatalyst, and high loading amount of photo-enzyme coupling system enhance the photocatalytic degradation of BPA. The degradation rate reached 94 % within 1 h, which is 5.9 times that of pure g-C3N4. The research findings open avenues for designing a photo-enzyme coupling system with high enzyme loading and high stability through simple steps.

Metal Organic Framework Cubosomes

AbstractWe demonstrate a general strategy for the synthesis of ordered bicontinuous‐structured metal organic frameworks (MOFs) by using polymer cubosomes (PCs) with a double primitive structure (Im m symmetry) as the template. The filling of MOF precursors in the open channel of PCs, followed by their coordination and removal of the template, generates MOF cubosomes with a single primitive topology (Pm m) and average mesopore diameters of 60–65 nm. Mechanism study reveals that the formation of ZIF‐8 cubosomes undergoes a new MOF growth process, which involves the formation of individual MOF seeds in the template, their growth and eventual fusion into the cubosomes. Their growth kinetics follows the Avrami equation with an Avrami exponent of n=3 and a growth rate of k=1.33×10−4, indicating their fast 3D heterogeneous growth mode. Serving as a bioreactor, the ZIF‐8 cubosomes show high loading of trypsin enzyme, leading to a high catalytic activity in the proteolysis of bovine serum albumin.

Metal Organic Framework Cubosomes.

We demonstrate a general strategy for the synthesis of ordered bicontinuous-structured metal organic frameworks (MOFs) by using polymer cubosomes (PCs) with a double primitive structure (Im m symmetry) as the template. The filling of MOF precursors in the open channel of PCs, followed by their coordination and removal of the template, generates MOF cubosomes with a single primitive topology (Pm m) and average mesopore diameters of 60-65 nm. Mechanism study reveals that the formation of ZIF-8 cubosomes undergoes a new MOF growth process, which involves the formation of individual MOF seeds in the template, their growth and eventual fusion into the cubosomes. Their growth kinetics follows the Avrami equation with an Avrami exponent of n=3 and a growth rate of k=1.33×10-4 , indicating their fast 3D heterogeneous growth mode. Serving as a bioreactor, the ZIF-8 cubosomes show high loading of trypsin enzyme, leading to a high catalytic activity in the proteolysis of bovine serum albumin.

Controlling the Adsorption of β-Glucosidase onto Wrinkled SiO2 Nanoparticles To Boost the Yield of Immobilization of an Efficient Biocatalyst.

β-Glucosidase (BG) catalyzes the hydrolysis of cellobiose to glucose, a substrate for fermentation to produce the carbon-neutral fuel bioethanol. Enzyme thermal stability and reusability can be improved through immobilization onto insoluble supports. Moreover, nanoscaled matrixes allow for preserving high reaction rates. In this work, BG was physically immobilized onto wrinkled SiO2 nanoparticles (WSNs). The adsorption procedure was tuned by varying the BG:WSNs weight ratio to achieve the maximum controllability and maximize the yield of immobilization, while different times of immobilization were monitored. Results show that a BG:WSNs ratio equal to 1:6 wt/wt provides for the highest colloidal stability, whereas an immobilization time of 24 h results in the highest enzyme loading (135 mg/g of support) corresponding to 80% yield of immobilization. An enzyme corona is formed in 2 h, which gradually disappears as the protein diffuses within the pores. The adsorption into the silica structure causes little change in the protein secondary structure. Furthermore, supported enzyme exhibits a remarkable gain in thermal stability, retaining complete folding up to 90 °C. Catalytic tests assessed that immobilized BG achieves 100% cellobiose conversion. The improved adsorption protocol provides simultaneously high glucose production, enhanced yield of immobilization, and good reusability, resulting in considerable reduction of enzyme waste in the immobilization stage.

Surface modified materials for active capture of enzymes.

The insertion of bis(diarylcarbene)s onto a glass fiber (GF) membrane surface provided an active coating for the direct capture of protein - exemplified by the enzyme, cellulase - through a mild diazonium coupling process which does not require additional coupling agents. Successful cellulase attachment on the surface was demonstrated by the disappearance of diazonium and formation of azo functions in the N 1s high resolution spectra, the appearance of carboxyl group in C 1s spectra, both observed by XPS; the -CO vibrational bond observed by ATR-IR; as well as the observation of fluorescence. Further, five support materials (polystyrene XAD4 bead, polyacrylate MAC3 bead, glass wool, glass fiber membrane, polytetrafluoroethylene membrane) with different morphology and surface chemistry, were examined in detail as supports for cellulase immobilization using this common surface modification protocol. Of interest is that such covalently bound cellulase on modified GF membrane gave both the highest enzyme loading (∼23 mg cellulase per g support), and retained more than 90% of activity after 6 cycles of re-use, compared with substantial loss of enzyme activity for physiosorbed cellulase after 3 cycles. Optimization of the degree of surface grafting and the effectiveness of a spacer between surface and enzyme for enzyme loading and activity were conducted. This work shows that carbene surface modification is a viable strategy for introducing enzymes onto a surface under very mild conditions and retaining a meaningful level of activity, and particularly, using GF membrane as a novel support provides a potential platform for enzyme and protein immobilization.