High Classification Accuracy Research Articles

A Hardware-Efficient Novelty-Aware Spike Sorting Approach for Brain-Implantable Microsystems.

Unsupervised spike sorting, a vital processing step in real-time brain-implantable microsystems, is faced with the prominent challenge of managing nonstationarity in neural signals. In long-term recordings, spike waveforms gradually change and new source neurons are likely to become activated. Adaptive spike sorters combined with on-implant training units effectively process the nonstationary signals at the cost of high hardware resource utilization. On the other hand, static approaches, while being hardware-friendly, are subjected to decreased processing performance in such recordings where the neural signal characteristics gradually change. To strike a balance between the hardware cost and processing performance, this study proposes a hardware-efficient novelty-aware spike sorting approach that is capable of dealing with both variated spike waveforms and spike waveforms generated from new source neurons. Its improved hardware efficiency compared to adaptive ones and capability of dealing with nonstationary signals make it attractive for implantable applications. The proposed novelty-aware spike sorting especially would be a good fit for brain-computer interfaces where long-term, real-time interaction with the brain is required, and the available on-implant hardware resources are limited. Our unsupervised spike sorting benefits from a novelty detection process to deal with neural signal variations. It tracks the spike features so that in case of detecting an unexpected change (novelty detection) both on and off-implant parameters are updated to preserve the performance in new state. To make the proposed approach agile enough to be suitable for brain implants, the on-implant computations are reduced while the computational burden is realized off-implant. The performance of our proposed approach is evaluated using both synthetic and real datasets. The results demonstrate that, in the mean, it is capable of detecting 94.31% of novel spikes (wave-drifted or emerged spikes) with a classification accuracy (CA) of 96.31%. Moreover, an FPGA prototype of the on-implant circuit is implemented and tested. It is shown that in comparison to the OSORT algorithm, a pivotal spike sorting method, our spike sorting provides a higher CA at significantly lower hardware resources. The proposed circuit is also implemented in a 180-nm standard CMOS process, achieving a power consumption of 1.78[Formula: see text][Formula: see text] per channel and a chip area of 0.07[Formula: see text]mm2 per channel.

SnapE-ResNet: A novel electronic nose classification algorithm for gas data collected by open sampling systems

Increasing the depth of the neural network and implementing the ensemble of neural networks are two main methods to improve the accuracy of gas recognition algorithms. However, the issues of optimization difficulties or excessive resource consumption may occur when training deep neural networks or integrating multiple neural networks. In this study, an algorithm of snapshot ensemble is combined with Residual network (ResNet) to form a SnapE-ResNet which could simplify the training of the network due to the residual structure of ResNet, while realizes the ensemble of multiple ResNet models without additional time consumption and helps the network escape from local minimum using cyclic cosine annealing algorithm. The effectiveness of the proposed SnapE-ResNet is verified through classification experiments on the public dataset. Furthermore, the long-term drift and short-term drift are reduced by applying a zero-offset baseline compensation algorithm and a gaussian noise that added to the baseline signal. The experimental result indicating a high gas classification accuracy of 99.8% from SnapE-ResNet is obtained, outperforming the comparative models. In addition, the necessity for snapshot ensemble is validated by network ablation experiments. This study could offer a reference for gas classification tasks in the gas detection fields.

Multichannel EMG-based gesture recognition utilizing advanced machine learning techniques: A random forest classifier for high-precision signal classification

This research examines how advanced machine learning algorithms can be used to classify multichannel electromyographic (EMG) signals with a high level of accuracy to assist in recognizing hand gestures. The goal is to create a robust and scalable system for gesture-based virtual control using EMG signals with potential applications in assistive technologies, rehabilitation, and human-computer interaction. Data were gathered using a MYO Thalmic bracelet containing eight EMG sensors on thirty-six subjects, and a Random Forest classifier was trained to identify seven distinct types of hand gestures (rest, fist clench, wrist flexion/extension, and radial/ulnar deviations). The machine learning pipeline included extensive preprocessing (i.e., EMG signal normalization and signal feature extraction; root mean square, waveform length, and zero crossing rate) and several hyperparameter tuning procedures to improve model performance. The Random Forest model (100 decision trees) achieved an overall classification accuracy of 98.68%, with a range of accuracies for each class (e.g., 95.2% wrist flexion and 91.8% ulnar deviation) when evaluated using cross-validation (i.e., average F1-score = 0.92, precision = 0.94, recall = .91). Overall, the study provides strong evidence for the effectiveness of ensemble learning methods at analyzing complex, multidimensional EMG signals. The high classification accuracy reported, in particular, demonstrates that the system could function for real-time recognition of hand gestures in a virtual environment. Ultimately, the initial work sets the stage for future exploration of a model that may be integrated with actuation models to control prosthetic limbs, virtual actors/avatars, and robotic devices. By demonstrating a scalable and efficient method of gesture recognition using EMG signals, these early findings enable future pathways and possibilities to design innovative, assistive solutions for digital systems that increase accessibility and interaction for users who are motor impaired or have a limited range of motion.

Earthwork Network Architecture (ENA): Research for Earthwork Quantity Estimation Method Improvement with Large Language Model

Accurate earthwork quantity estimation is essential for effective project planning and cost management in the Architecture, Engineering, and Construction (AEC) industry. Traditional methods for quantity takeoff are often time-consuming and susceptible to human error, particularly when working with unstructured datasets such as CAD drawings. This study introduces the Earthwork Network Architecture (ENA), a novel deep learning framework that incorporates Large Language Models (LLMs), Multi-Layer Perceptron (MLP), Long Short-Term Memory (LSTM) networks, and Transformers to automate and enhance the accuracy of earthwork quantity estimation. We assume that if LLMs can be trained effectively using such unstructured construction dataset, the effects such as improved accuracy and the challenges of LLMs can be clearly examined. Among the architectures tested, the LLM-based ENA demonstrated superior performance, achieving faster convergence, greater loss reduction, and higher classification accuracy, with a Quantity Takeoff Classification accuracy of 97.17%. However, the LLMs required significantly more computational resources compared with other models. These findings suggest that LLMs, typically used in natural language processing, can be effectively adapted for complex AEC datasets. This study lays the groundwork for future AI-driven solutions in the AEC industry, underscoring the potential of LLMs and Transformers to automate the quantity takeoff process and manage multimodal data in construction projects.

Raman Handheld Versus Microscopic Spectroscopy for Estimating the Post-Mortem Interval of Human Bones: A Comparative Pilot Study

The post-mortem interval estimation for human skeletal remains is critical in forensic medicine. This study used Raman spectroscopy, specifically comparing a handheld device to a Raman microscope for PMI estimations. Analyzing 99 autopsy bone samples and 5 archeological samples, the research categorized them into five PMI classes using conventional methods. Key parameters—like ν1PO43− intensity and crystallinity—were measured and analyzed. A principal component analysis effectively distinguished between PMI classes, indicating high classification accuracy for both devices. While both methods proved reliable, the fluorescence interference presented challenges in accurately determining the age of archeological samples. Ultimately, the study highlighted how Raman spectroscopy could enhance PMI estimation accuracy, especially in non-specialized labs, suggesting the potential for improved device optimization in the field.

Utilizing Artificial Intelligence for Microbiome Decision-Making: Autism Spectrum Disorder in Children from Bosnia and Herzegovina

Background/Objectives: The study of microbiome composition shows positive indications for application in the diagnosis and treatment of many conditions and diseases. One such condition is autism spectrum disorder (ASD). We aimed to analyze gut microbiome samples from children in Bosnia and Herzegovina to identify microbial differences between neurotypical children and those with ASD. Additionally, we developed machine learning classifiers to differentiate between the two groups using microbial abundance and predicted functional pathways. Methods: A total of 60 gut microbiome samples (16S rRNA sequences) were analyzed, with 44 from children with ASD and 16 from neurotypical children. Four machine learning algorithms (Random Forest, Support Vector Classification, Gradient Boosting, and Extremely Randomized Tree Classifier) were applied to create eight classification models based on bacterial abundance at the genus level and KEGG pathways. Model accuracy was evaluated, and an external dataset was introduced to test model generalizability. Results: The highest classification accuracy (80%) was achieved with Random Forest and Extremely Randomized Tree Classifier using genus-level taxa. The Random Forest model also performed well (78%) with KEGG pathways. When tested on an independent dataset, the model maintained high accuracy (79%), confirming its generalizability. Conclusions: This study identified significant microbial differences between neurotypical children and children with ASD. Machine learning classifiers, particularly Random Forest and Extremely Randomized Tree Classifier, achieved strong accuracy. Validation with external data demonstrated that the models could generalize across different datasets, highlighting their potential use.

Assessing the Performance of ChatGPT and Bard/Gemini Against Radiologists for PI-RADS Classification Based on Prostate Multiparametric MRI Text Reports.

Large language models (LLMs) have shown potential for clinical applications. This study assesses their ability to assign PI-RADS categories based on clinical text reports. One hundred consecutive biopsy-naïve patients' multiparametric prostate MRI reports were independently classified by two uroradiologists, GPT-3.5, GPT-4, Bard, and Gemini. Original report classifications were considered definitive. Out of 100 MRIs, 52 were originally reported as PI-RADS 1-2, 9 PI-RADS 3, 19 PI-RADS 4, and 20 PI-RADS 5. Radiologists demonstrated 95% and 90% accuracy, while GPT-3.5 and Bard both achieved 67%. Accuracy of the updated versions of LLMs increased to 83% (GTP-4) and 79% (Gemini), respectively. In low suspicion studies (PI-RADS 1-2), Bard and Gemini (F1: 0.94, 0.98, respectively) outperformed GPT-3.5 and GTP-4 (F1:0.77, 0.94, respectively), whereas for high probability MRIs (PI-RADS 4-5), GPT-3.5 and GTP-4 (F1: 0.95, 0.98, respectively) outperformed Bard and Gemini (F1: 0.71, 0.87, respectively). Bard assigned a non-existent PI-RADS 6 "hallucination" for two patients. Inter-reader agreements (Κ) between the original reports and the senior radiologist, junior radiologist, GPT-3.5, GTP-4, BARD, and Gemini were 0.93, 0.84, 0.65, 0.86, 0.57, and 0.81, respectively. Radiologists demonstrated high accuracy in PI-RADS classification based on text reports, while GPT-3.5 and Bard exhibited poor performance. GTP-4 and Gemini demonstrated improved performance compared to their predecessors. This study highlights the limitations of LLMs in accurately classifying PI-RADS categories from clinical text reports. While the performance of LLMs has improved with newer versions, caution is warranted before integrating such technologies into clinical practice.

Intrusion event recognition method for distributed fibre optic sensing systems based on Siamese networks

ABSTRACT Due to its high sensitivity and wide measurement range, the distributed optical fibre sensing system has been widely used in long-distance infrastructure monitoring, where it detects vibration signals caused by external events and provides effective early warnings. Given the complexity and diversity of external intrusion events, traditional closed-set classification methods cannot effectively exclude unknown signals. Open-set recognition methods, on the other hand, involve complex model designs, requiring boundary Algorithms and often the inclusion of information related to unknown classes. In this paper, we combine a Siamese network with a residual network to recognise events in the distributed optical fibre sensing system. Through experiments, by comparing the similarity with data in the database, we not only ensure very high accuracy in closed-set classification but also effectively exclude unknown class signals. Experimental results show that our method successfully rejects unknown class data with a 92% success rate, while maintaining closed-set classification accuracy at an average of 99%. Our approach demonstrates excellent performance.

Recognition of Sheep Feeding Behavior in Sheepfolds Using Fusion Spectrogram Depth Features and Acoustic Features

In precision feeding, non-contact and pressure-free monitoring of sheep feeding behavior is crucial for health monitoring and optimizing production management. The experimental conditions and real-world environments differ when using acoustic sensors to identify sheep feeding behaviors, leading to discrepancies and consequently posing challenges for achieving high-accuracy classification in complex production environments. This study enhances the classification performance by integrating the deep spectrogram features and acoustic characteristics associated with feeding behavior. We conducted the task of collecting sound data in actual production environments, considering noise and complex surroundings. The method included evaluating and filtering the optimal acoustic features, utilizing a customized convolutional neural network (SheepVGG-Lite) to extract Short-Time Fourier Transform (STFT) spectrograms and Constant Q Transform (CQT) spectrograms’ deep features, employing cross-spectrogram feature fusion and assessing classification performance through a support vector machine (SVM). Results indicate that the fusion of cross-spectral features significantly improved classification performance, achieving a classification accuracy of 96.47%. These findings highlight the value of integrating acoustic features with spectrogram deep features for accurately recognizing sheep feeding behavior.

Performance Analysis of ML and DL Models: Impact of Linear and Non-Linear Optimizers on Model Efficiency

Introduction: Emphasizing the effect of linear and non-linear optimizers on the performance of machine learning (ML) and deep learning (DL) models, this work addresses the CIFAR-10 image classification task. The work explores over multiple data sets how optimizers influence model behavior and efficiency. Objectives: With a view on five primary assessment metrics—accuracy, precision, recall, F1-score, and AUC the main purpose is to evaluate on SVM and CNN models the performance of linear optimizers (gradient descent, SGD) and non-linear optimizers (Adam, RMSProp). Methods: The study offers fair and complete comparison by way of a consistent evaluation strategy. Analyzing how different optimizer influences model convergence rates, computational cost, and training stability takes front stage in the experimental setting. Designed on CIFAR-10, optimizers are used on ML and DL models whose performance on all metrics is noted. Results: Results show that non-linear optimizers especially Adam much increase CNN model performance by means of faster convergence, higher classification accuracy, and better model stability. While helpful for simpler models, linear optimizers such SGD show slower convergence and limited adaptation with more complicated data. Conclusions: This study provides direction on selecting appropriate optimizers depending on model complexity, job needs, and computing restrictions coupled with important information on optimizing model training in image classification and other areas.

Assessing Chile's national expansion of urban and artificial coverages between 2000 and 2022

Abstract. This study investigates the national expansion of urban and artificial coverages in Chile between 2000 and 2022 using remote sensing techniques. The research employed Google Earth Engine and Landsat imagery to classify land use and land cover (LULC) changes. By analyzing annual cloud-free composites and employing random forest algorithms, the study produced detailed LULC maps, focusing on the 'infrastructure' class, which includes urban areas and major roads. Results indicate a significant 33% increase in infrastructure coverage, growing from approximately 380,000 hectares in 2000 to 510,000 hectares in 2022. This expansion was predominantly observed in seven regions, which accounted for 68% of the total infrastructure area and 83% of the national increase. A notable correlation (0.6) between urban growth and population growth was identified, suggesting that urban expansion is largely driven by demographic changes. However, regions with higher population growth exhibited more vertical urban development. The study highlights the complex interplay between urbanization, population dynamics, and regional planning, emphasizing the need for sustainable development strategies to manage urban growth effectively. Validation efforts showed high classification accuracies, with infrastructure class accuracies averaging 82% for the User and 87% for the Producer across the evaluated years.

NIMG-66. DEFINING PROGRESSIVE DISEASE: LOCALIZING VOXEL-AT-RISK ON MAGNETIC RESONANCE IMAGING USING DEEP LEARNING

Abstract Follow-up magnetic resonance imaging (MRI) of post-treatment glioblastoma (GBM) can be diagnostically challenging in differentiating progressive disease (PD) from coexisting treatment-related changes. The study aim was to train a machine learning model using multiple MRI timepoints from treated GBM patients with subsequent PD or at least six months of tumor-like, persistently stable disease (SD) to estimate PD risk. A retrospective, post-treatment GBM cohort (n=189) with 453 timepoints was identified with available MRI sequences (T1-weighted with and without contrast, T2-weighted, and fluid-attenuated inversion recovery). PD cases (n=154) showed new, enhancing PD followed by death within 3-6 months; timepoints included the MRI on the PD diagnosis date and the one directly prior. SD cases (n=35) exhibited stable, tumor-like enhancement over timepoints. Cases underwent voxel-wise annotation of PD versus SD. A multiclass, three-dimensional nnU-Net was trained to label voxels as PD, SD, or neither using timepoint sequences with five-fold cross-validation. Model performance was assessed using the ratio of predicted PD/SD voxels compared to each case’s actual PD or SD status. Classification accuracy of PD versus SD status, PD case-wise sensitivity and specificity, and a Receiver Operating Characteristic (ROC) analysis using the PD/SD ratio were presented. The five-fold model ensemble was evaluated on a holdout test set. Validation set performance showed 74.3% accuracy, 0.73 PD case-wise sensitivity, and 0.80 specificity. The holdout set exhibited 79.8% accuracy, 0.81 sensitivity, and 0.78 specificity for PD cases. The ROC analysis showed an area under the curve of 0.80 and 0.83 on the validation and holdout sets, respectively. The model showed high performance and classification accuracy in predicting which voxels were at risk of PD in post-treatment GBM cases. The model also differentiated between PD and SD regions. The model’s predicted PD/SD ratio may be clinically used to stratify patients’ PD risk.

Imaging‐Based Lensless Polarization‐Sensitive Fluid Stream Analyzer for Automated, Label‐Free, and Cost‐Effective Microplastic Classification

The presence of microplastics in the environment is of significant concern, yet the exact extent of this pollution remains largely unknown. The ocean is of particular interest as the monitoring of microplastics presents a challenge in that in situ fluid stream solutions are not readily available and traditional sampling methods are labor‐intensive and costly. This study introduces an imaging‐based lensless polarization‐sensitive fluid stream analyzer (FSA) for automated, label‐free, and cost‐effective detection and classification of microplastics. The FSA incorporates digital in‐line holography and birefringence computation, enabling quantitative polarization‐sensitive imaging and machine‐learning‐based activities including sample classification. Birefringent textures of synthetic polymers are investigated owing to their optical anisotropy. A microplastic classifier is developed for the FSA and integrated to form an end‐to‐end workflow capable of sampling fluid streams and determining marine and microplastic particle presence. Cultures of two phytoplankton species form a simplified marine environment for FSA evaluation. The device is tested in a two‐class configuration for marine microorganisms and microplastics, as well as a five‐class configuration for marine microorganisms and four individual microplastic types (polyethylene, polyethylene terephthalate, polypropylene, and polystyrene). The results demonstrate high classification accuracy, supported by experiments in the simulated marine environment that validate the proposed implementation's efficacy.

Comparative Study of Random Forest and Support Vector Machine for Land Cover Classification and Post-Wildfire Change Detection

The land use land cover (LULC) map is extensively employed for different purposes. Machine learning (ML) algorithms applied in remote sensing (RS) data have been proven effective in image classification, object detection, and semantic segmentation. Previous studies have shown that random forest (RF) and support vector machine (SVM) consistently achieve high accuracy for land classification. Considering the important role of Portugal’s Serra da Estrela Natural Park (PNSE) in biodiversity and nature conversation at an international scale, the availability of timely data on the PNSE for emergency evaluation and periodic assessment is crucial. In this study, the application of RF and SVM classifiers, and object-based (OBIA) and pixel-based (PBIA) approaches, with Sentinel-2A imagery was evaluated using Google Earth Engine (GEE) platform for the land cover classification of a burnt area in the PNSE. This aimed to detect the land cover change and closely observe the burnt area and vegetation recovery after the 2022 wildfire. The combination of RF and OBIA achieved the highest accuracy in all evaluation metrics. At the same time, a comparison with the Normalized Difference Vegetation Index (NDVI) map and Conjunctural Land Occupation Map (COSc) of 2023 year indicated that the SVM and PBIA map resembled the maps better.

UCapsNet: A Two-Stage Deep Learning Model Using U-Net and Capsule Network for Breast Cancer Segmentation and Classification in Ultrasound Imaging

Background/Objectives: Breast cancer remains one of the biggest health challenges for women worldwide, and early detection can be truly lifesaving. Although ultrasound imaging is commonly used to detect tumors, the images are not always of sufficient quality, and, thus, traditional U-Net models often miss the finer details needed for accurate detection. This outcome can result in lower accuracy, making early and precise diagnosis more difficult. Methods: This study presents an enhanced U-Net model integrated with a Capsule Network (called UCapsNet) to overcome the limitations of conventional techniques. Our approach improves segmentation by leveraging higher filter counts and skip connections, while the capsule network enhances classification by preserving spatial hierarchies through dynamic routing. The proposed UCapsNet model operates in two stages: first, it segments tumor regions using an enhanced U-Net, followed by a classification of the segmented images with the capsule network. Results: We have tested our model against well-known pre-trained models, including VGG-19, DenseNet, MobileNet, ResNet-50, and Xception. By properly addressing the limitations found in previous studies and using a capsule network trained on the Breast Ultrasound Image (BUSI) dataset, our model resulted in top-achieving impressive precision, recall, and accuracy rates of 98.12%, 99.52%, and 99.22%, respectively. Conclusions: By combining the U-Net’s powerful segmentation capabilities with the capsule network’s high classification accuracy, UCapsNet boosts diagnostic precision and addresses key weaknesses in existing methods. The findings demonstrate that the proposed model is not only more effective in detecting tumors but also more reliable for practical applications in clinical settings.

On most informative regions for binary classification of schizophrenia based on resting state fMRI data done by selection of functionally homogeneous regions method

In this work we solve the problem of automatic binary classification of subjects with a diagnosis of schizophrenia and control groups on a data set obtained on a Siemens 3T tomograph. The data set included 36 subjects undergoing treatment at Psychiatric Hospital no. 1 Named after N.A. Alexeev of the Department of Health of Moscow (GBUZ PKB No. 1 DZM) and 36 subjects from the control group. Machine learning methods were used to solve this problem. As a result, an accuracy of 76% was achieved, which corresponds to the results obtained in other scientific studies. The highest accuracy was obtained for the local homogeneity parameter (regional homogeneity – ReHo), already known in the literature. At the same time, the set of features developed by the authors based on the method for identifying functionally homogeneous regions (FHR) gave a classification accuracy of 74%. But at the same time, the set of FHR features provides higher classification accuracy when using a small number of brain regions. For example, already in 8 regions, the FHR set provided an almost maximum classification accuracy of 72.5% (versus 65% for the ReHo set), which suggests that it is the selected 8 regions that give the highest level of separation.

Indoor Air Quality Monitoring System with High Accuracy of Gas Classification and Concentration Prediction via Selective Mechanism Research.

The efficacy of sensors, particularly sensor arrays, lies in their selectivity. However, research on selectivity remains notably obscure and scarce. In this work, indoor pollutants (C7H8, HCHO, CH4, and NO2) were chosen as the target gas. Following the screening of six oxides from previous work, temperature-programmed desorption/reduction experiments were conducted to delve into the origins of selectivity. The results explicate the superiority of NiO in detecting toluene and unveil the distinctive NO2 sensing mechanism of WO3 sensors. Based on the sensor array comprising these oxides, it can clearly detect low concentrations of C7H8 (S = 1.6 to 50 ppb), HCHO (S = 1.4 to 50 ppb), and NO2 (S = 3.3 to 50 ppb), which satisfies the requisites of indoor air monitoring. Meanwhile, three machine learning models (Extreme Gradient Boosting, Support Vector Machine, and Back Propagation Neural Network) are employed for gas classification. The classification accuracies of these models are 95.45%, 100%, and 100%, while the R2 values of the concentration prediction are 99.65%, 94.9%, and 98.04%, respectively, indicating the rationality of material selection. Furthermore, it can still achieve relatively high accuracy in gas classification (94.12%) and concentration prediction (89.36%), even for gas mixtures of four gases. Finally, an indoor air quality monitoring system is developed, which enables real-time monitoring of indoor gas quality through the Internet of Things.

The construction of a peripheral blood qualitative transcriptional signature for the diagnosis of active tuberculosis

Objective: To construct a signature for identifying active tuberculosis (TB) based on the relative expression orderings (REOs) of gene expression within a single sample. Methods: Using peripheral whole blood samples from 75 active TB and 69 latently infected individuals from four datasets as the training set, and highly stable REO patterns were extracted from the gene expression profile of the two groups of samples. Then, the gene pairs that reversed the REO pattern between the two groups were selected, and each gene pair was ranked in descending order based on their reversal degree. Finally, the top k gene pairs with the highest classification accuracy were selected as the signature for independent dataset validation. Results: A signature composed of seven gene pairs, denoted as 7-GPS, was constructed from the training set. The accuracy rate for 7-GPS to distinguish active TB from latently infected samples was 88.89%, and the accuracy rate for distinguishing active TB from normal samples was 90.09%. In the mixed validation data from different detection platforms, the AUC value for distinguishing active TB from latently infected samples was 0.914 (95%CI: 0.881-0.948), and the AUC value for distinguishing active TB from normal samples was 0.934 (95%CI: 0.904-0.964). In addition, the four genes ETV7, BATF2, ANKRD22 and CARD17P from this signature tended to be highly expressed in peripheral blood samples of active TB, and their expression values were significantly related to the duration of anti-tuberculosis treatment in clinical. Conclusion: The 7-GPS signature is robust and suitable for individualized analysis of a single peripheral blood sample. It has certain clinical application potential.

Robust Health Condition Prediction of Helicopter Turboshaft Engines Using Ensemble Machine Learning Models

This paper presents a novel ensemble approach that combines multiple machine-learning algorithms to deliver robust predictions of helicopter turboshaft engine health status (nominal or faulty) using operational data. Engine health is evaluated through the torque margin, defined as the percentage difference between the measured and target torque values. A Gaussian process model is used to estimate the torque margin as a probability distribution function (PDF), and these predictions are incorporated as features into various machine-learning models. These models are then employed to perform binary classification, determining the engine's health state. To enhance performance, a reference set is defined for each unseen data point, allowing a comparison of the relative performances of the models, with the best performer selected for the final prediction. Our ensemble method achieves high accuracy in health classification while providing precise torque margin estimates. The results demonstrate that ensemble models offer superior generalization and reliability compared to individual machine-learning algorithms, especially when applied to complex, multivariate datasets like those from helicopter turboshaft engines.

Tree-based learning on amperometric time series data demonstrates high accuracy for classification

Tree-based learning on amperometric time series data demonstrates high accuracy for classification