High WSS Research Articles

Coronary computed tomographic angiography-derived anatomic and hemodynamic plaque characteristics in prediction of cardiovascular events.

This study investigated the association of anatomic and hemodynamic plaque characteristics based on deep learning coronary computed tomography angiography (CCTA) with high-risk plaques that caused subsequent major adverse cardiovascular events (MACE). A retrospective analysis was conducted on patients who underwent CCTA between 1month and 3years prior to the occurrence of a MACE. Deep learning and computational fluid dynamics algorithms based on CCTA were applied to extract adverse plaque characteristics (low-attenuation plaque, positive remodeling, napkin-ring sign, and spotty calcification), and hemodynamic parameters (fractional flow reserve derived by coronary computed tomographic angiography [FFRCT], change in FFRCT across the lesion [△FFRCT], wall shear stress [WSS], and axial plaque stress [APS]). Correlation analysis, logistic regression, and Cox proportional risk analysis were conducted to understand the relationship between these measures and the occurrence of MACE and assess the value of hemodynamic parameters in predicting the incidence of MACE events and their prognosis. Our study included 86 patients with a total of 134 vessels exhibiting plaque formation and 83 culprit vessels with a subsequent coronary event. Culprit vessels had percent diameter stenosis [%DS] (0.54 ± 0.16 vs. 0.62 ± 0.13, P = 0.003), larger non-calcified plaque volume (45.8 vs. 101.7, P < 0.001), larger low-attenuation plaque volume (3.6 vs. 14.5, P < 0.001), more lesions with ≥ 3 adverse plaque characteristics (APC) (4 vs.26, P = 0.002), and worse hemodynamic features of adverse plaque. FFRCT demonstrated better visualization of maximum achievable flow in the presence of coronary stenosis and better correlation with the stenosis severity, while maximum of wall shear stress (WSSmax) was highly correlated with low-attenuation plaques and APC. The inclusion of hemodynamic parameters improved the efficacy of the predictive model, and a high WSS suggested a higher probability of MACE. Hemodynamic parameters based on CCTA are significantly correlated with plaque morphology. Importantly, integrating CCTA-derived parameters can refine the predictive performance of MACE occurrence.

Exploring the relationship between hemodynamics and the immune microenvironment in carotid atherosclerosis: Insights from CFD and CyTOF technologies

Carotid atherosclerosis is a major cause of stroke. Hemodynamic forces, such as shear stress and oscillatory shear, play an important role in the initiation and progression of atherosclerosis. The alteration of the immune microenvironment is the fundamental pathological mechanism by which diverse external environmental factors impact the formation and progression of plaques. However, Current research on the relationship between hemodynamics and immunity in atherosclerosis still lack of comprehensive understanding. In this study, we combined computational fluid dynamics (CFD) and Mass cytometry (CyTOF) technologies to explore the changes in the immune microenvironment within plaques under different hemodynamic conditions. Our results indicated that neutrophils were enriched in adverse flow environments. M2-like CD163+CD86+ macrophages were predominantly enriched in high WSS and low OSI environments, while CD163-CD14+ macrophages were enriched in low WSS and high OSI environments. Functional analysis further revealed T cell pro-inflammatory activation and dysregulation in modulation, along with an imbalance in M1-like/M2-like macrophages, suggesting their potential involvement in the progression of atherosclerotic lesions mediated by adverse flow patterns. Our study elucidated the potential mechanisms by which hemodynamics regulated the immune microenvironment within plaques, providing intervention targets for future precision therapies.

A model with multiple intracranial aneurysms: possible hemodynamic mechanisms of aneurysmal initiation, rupture and recurrence

BackgroundHemodynamic factors play an important role in aneurysm initiation, growth, rupture, and recurrence, while the mechanism of the hemodynamic characteristics is still controversial. A unique model of multiple aneurysms (initiation, growth, rupture, and recurrence) is helpful to avoids the confounders and further explore the possible hemodynamic mechanisms of aneurysm in different states.MethodsWe present a model with multiple aneurysms, and including the states of initiation, growth, rupture, and recurrence, discuss the proposed mechanisms, and describe computational fluid dynamic model that was used to evaluate the likely hemodynamic effect of different states of the aneurysms.ResultsThe hemodynamic analysis suggests that high flow impingement and high WSS distribution at normal parent artery was found before aneurysmal initiation. The WSS distribution and flow velocity were decreased in the new sac after aneurysmal growth. Low WSS was the risk hemodynamic factor for aneurysmal rupture. High flow concentration region on the neck plane after coil embolization still marked in recanalized aneurysm.ConclusionsAssociations have been identified between high flow impingement and aneurysm recanalization, while low WSS is linked to the rupture of aneurysms. High flow concentration and high WSS distribution at normal artery associated with aneurysm initiation and growth, while after growth, the high-risk hemodynamics of aneurysm rupture was occurred, which is low WSS at aneurysm dome.

Transition of intracranial aneurysmal wall enhancement from high to low wall shear stress mediation with size increase: A hemodynamic study based on 7T magnetic resonance imaging

BackgroundWall shear stress (WSS) has been proved to be related to the formation, development and rupture of intracranial aneurysms. Aneurysm wall enhancement (AWE) on magnetic resonance imaging (MRI) can be caused by inflammation and have confirmed its relationship with low WSS. High WSS can also result in inflammation but the research of its correlation with AWE is lack because of the focus on large aneurysms limited by 3T MRI in most previous studies.This study aimed to assess the potential association between high or low WSS and AWE in different aneuryms. Especially the relationship between high WSS and AWE in small aneurysm. MethodsForty-three unruptured intracranial aneurysms in 42 patients were prospectively included for analysis. 7.0 T MRI was used for imaging. Aneurysm size was measured on three-dimensional time-of-flight (TOF) images. Aneurysm-to-pituitary stalk contrast ratio (CRstalk) was calculated on post-contrast black-blood T1-weighted fast spin echo sequence images. Hemodynamics were assessed by four-dimensional flow MRI. ResultsThe small aneurysms group had more positive WSS–CRstalk correlation coefficient distribution (dome: 78.6 %, p = 0.009; body: 50.0 %, p = 0.025), and large group had more negative coefficient distribution (dome: 44.8 %, p = 0.001; body: 69.0 %, p = 0.002). Aneurysm size was positively correlated with the significant OSI–CRstalk correlation coefficient at the dome (p = 0.012) and body (p = 0.010) but negatively correlated with the significant WSS–CRstalk correlation coefficient at the dome (p < 0.001) and body (p = 0.017). ConclusionAWE can be mediated by both high and low WSS, and translate from high WSS- to low WSS-mediated pathways as size increase. Additionally, AWE may serve as an indicator of the stage of aneurysm development via different correlations with hemodynamic factors.

Numerical modelling of the interaction between dialysis catheter, vascular vessel and blood considering elastic structural deformation.

The dialysis catheter indwelling in human bodies has a high risk of inducing thrombus and stenosis. Biomechanical research showed that such physiological complications are triggered by the wall shear stress of the vascular vessel. This study aimed to assess the impact of CVC implantation on central venous haemodynamics and the potential alterations in the haemodynamic environment related to thrombus development. The SVC structure was built from the images from computed tomography. The blood flow was calculated using the Carreau model, and the fluid domain was determined by CFD. The vascular wall and the CVC were computed using FEA. The elastic interaction between the vessel wall and the flow field was considered using FSI simulation. With consideration of the effect of coupling, it was shown that the catheter vibrated in the vascular systems due to the periodic variation of blood pressure, with an amplitude of up to 10% of the vessel width. Spiral flow was observed along the catheter after CVC indwelling, and recirculation flow appeared near the catheter tip. High OSI and WSS regions occurred at the catheter tip and the vascular junction. The arterial lumen tip had a larger effect on the WSS and OSI values on the vascular wall. Considering FSI simulation, the movement of the catheter inside the blood flow was simulated in the deformable vessel. After CVC indwelling, spiral flow and recirculation flow were observed near the regions with high WSS and OSI values.

Assessing the risk of intracranial aneurysm rupture using computational fluid dynamics: a pilot study.

This study compared 2 representative cases with ruptured aneurysms to explore the role of hemodynamic and morphological parameters in evaluating the rupture risk of intracranial aneurysms (IAs). CTA and 3-dimensional rotational angiography (3DRA) of 3 IAs in 2 patients were retrospectively analyzed in this study. Hemodynamics and morphological parameters were compared between a ruptured IA and an unruptured IA in case1, and between before and after aneurysm rupture in case 2. In case 1, the ruptured aneurysm had larger morphological parameters including size ratio (SR), aspect ratio (AR), aneurysm vessel angle (θF), Aneurysm inclination angle (θA), Undulation index (UI), Ellipticity index (EI), and Non-sphericity Index (NSI) than the unruptured aneurysm. And oscillatory shear index (OSI) is also larger. Higher rupture resemblance score (RRS) was shown in the ruptured aneurysm. In case 2, the aneurysm had one daughter sac after 2 years. Partial morphological and hemodynamic parameters including SR, AR, θF, θA, UI, EI, NSI, OSI, and relative residence time (RRT) increased, and normalized wall shear stress (NWSS) was significantly reduced. RRS increased during this period. SR and OSI may have predictive values for the risk of intracranial aneurysm rupture. It is possible that WSS Changes before and after IA rupture, yet the influence of high or low WSS on growth and rupture of IA remains unclear. RRS is promising to be used in the clinical assessment of the rupture risk of IAs and to guide the formulation of treatment plans.

Wall shear stress and its role in atherosclerosis.

Atherosclerosis (AS) is the major form of cardiovascular disease and the leading cause of morbidity and mortality in countries around the world. Atherosclerosis combines the interactions of systemic risk factors, haemodynamic factors, and biological factors, in which biomechanical and biochemical cues strongly regulate the process of atherosclerosis. The development of atherosclerosis is directly related to hemodynamic disorders and is the most important parameter in the biomechanics of atherosclerosis. The complex blood flow in arteries forms rich WSS vectorial features, including the newly proposed WSS topological skeleton to identify and classify the WSS fixed points and manifolds in complex vascular geometries. The onset of plaque usually occurs in the low WSS area, and the plaque development alters the local WSS topography. low WSS promotes atherosclerosis, while high WSS prevents atherosclerosis. Upon further progression of plaques, high WSS is associated with the formation of vulnerable plaque phenotype. Different types of shear stress can lead to focal differences in plaque composition and to spatial variations in the susceptibility to plaque rupture, atherosclerosis progression and thrombus formation. WSS can potentially gain insight into the initial lesions of AS and the vulnerable phenotype that gradually develops over time. The characteristics of WSS are studied through computational fluid dynamics (CFD) modeling. With the continuous improvement of computer performance-cost ratio, WSS as one of the effective parameters for early diagnosis of atherosclerosis has become a reality and will be worth actively promoting in clinical practice. The research on the pathogenesis of atherosclerosis based on WSS is gradually an academic consensus. This article will comprehensively review the systemic risk factors, hemodynamics and biological factors involved in the formation of atherosclerosis, and combine the application of CFD in hemodynamics, focusing on the mechanism of WSS and the complex interactions between WSS and plaque biological factors. It is expected to lay a foundation for revealing the pathophysiological mechanisms related to abnormal WSS in the progression and transformation of human atherosclerotic plaques.

Near-wall hemodynamic parameters quantification in in vitro intracranial aneurysms with 7 T PC-MRI

ObjectiveWall shear stress (WSS) and its derived spatiotemporal parameters have proven to play a major role on intracranial aneurysms (IAs) growth and rupture. This study aims to demonstrate how ultra-high field (UHF) 7 T phase contrast magnetic resonance imaging (PC-MRI) coupled with advanced image acceleration techniques allows a highly resolved visualization of near-wall hemodynamic parameters patterns in in vitro IAs, paving the way for more robust risk assessment of their growth and rupture.Materials and methodsWe performed pulsatile flow measurements inside three in vitro models of patient-specific IAs using 7 T PC-MRI. To this end, we built an MRI-compatible test bench, which faithfully reproduced a typical physiological intracranial flow rate in the models.ResultsThe ultra-high field 7 T images revealed WSS patterns with high spatiotemporal resolution. Interestingly, the high oscillatory shear index values were found in the core of low WSS vortical structures and in flow stream intersecting regions. In contrast, maxima of WSS occurred around the impinging jet sites.ConclusionsWe showed that the elevated signal-to-noise ratio arising from 7 T PC-MRI enabled to resolve high and low WSS patterns with a high degree of detail.

Experimental evaluation of a patient specific Brachio-Cephalic Arterio Venous Fistula (AVF): Velocity flow conditions under steady and pulsatile waveforms.

Arterio-Venous Fistulas (avf) are the most popular form of vascular access used for hemodialysis. However they continue to present complications leading to early and late failure. To understand the reasons for failure, it is necessary to analyze the hemodynamics involved. Wall shear stress (wss) is commonly studied in avfs as it often relates to cardiovascular disease, although there is dispute over whether high or low wss is detrimental to avf patency. The goal of this paper is to investigate velocity flow conditions in a rigid, patient-specific brachio-cephalic avf model in both steady flow (Re = 1817) and patient-specific pulsatile flow (Reav=1817, Remax=2233). Particle Image Velocimetry (piv) measurements were performed at the anastomosis to capture the complex 3D-3C flow present. The results from this study found regions of recirculation and high velocity fluctuations in the distal artery and proximal vein, and flow impingement at the anastomosis toe. Steady and pulsatile flow demonstrated similar flow features, possibly owed to the low pulsatility index. In addition, the recirculation zone did not vary along the waveform. The directional variability was seen to be the highest at the regions of recirculation and flow impingement suggesting regions of high transWSS while the coefficient of variation was greatest at the walls and in areas of flow separation indicating high temporal wall shear stress.

A realistic arteriovenous dialysis graft model for hemodynamic simulations.

ObjectiveThe hemodynamic benefit of novel arteriovenous graft (AVG) designs is typically assessed using computational models that assume highly idealized graft configurations and/or simplified boundary conditions representing the peripheral vasculature. The objective of this study is to evaluate whether idealized AVG models are suitable for hemodynamic evaluation of new graft designs, or whether more realistic models are required.MethodsAn idealized and a realistic, clinical imaging based, parametrized AVG geometry were created. Furthermore, two physiological boundary condition models were developed to represent the peripheral vasculature. We assessed how graft geometry (idealized or realistic) and applied boundary condition models of the peripheral vasculature (physiological or distal zero-flow) impacted hemodynamic metrics related to AVG dysfunction.ResultsAnastomotic regions exposed to high WSS (>7, ≤40 Pa), very high WSS (>40 Pa) and highly oscillatory WSS were larger in the simulations using the realistic AVG geometry. The magnitude of velocity perturbations in the venous segment was up to 1.7 times larger in the realistic AVG geometry compared to the idealized one. When applying a (non-physiological zero-flow) boundary condition that neglected blood flow to and from the peripheral vasculature, we observed large regions exposed to highly oscillatory WSS. These regions could not be observed when using either of the newly developed distal boundary condition models.ConclusionHemodynamic metrics related to AVG dysfunction are highly dependent on the geometry and the distal boundary condition model used. Consequently, the hemodynamic benefit of a novel graft design can be misrepresented when using idealized AVG modelling setups.

Isolating the Effect of Arch Architecture on Aortic Hemodynamics Late After Coarctation Repair: A Computational Study.

ObjectivesEffective management of aortic coarctation (CoA) affects long-term cardiovascular outcomes. Full appreciation of CoA hemodynamics is important. This study aimed to analyze the relationship between aortic shape and hemodynamic parameters by means of computational simulations, purposely isolating the morphological variable.MethodsComputational simulations were run in three aortic models. MRI-derived aortic geometries were generated using a statistical shape modeling methodology. Starting from n = 108 patients, the mean aortic configuration was derived in patients without CoA (n = 37, “no-CoA”), with surgically repaired CoA (n = 58, “r-CoA”) and with unrepaired CoA (n = 13, “CoA”). As such, the aortic models represented average configurations for each scenario. Key hemodynamic parameters (i.e., pressure drop, aortic velocity, vorticity, wall shear stress WSS, and length and number of strong flow separations in the descending aorta) were measured in the three models at three time points (peak systole, end systole, end diastole).ResultsComparing no-CoA and CoA revealed substantial differences in all hemodynamic parameters. However, simulations revealed significant increases in vorticity at the site of CoA repair, higher WSS in the descending aorta and a 12% increase in power loss, in r-CoA compared to no-CoA, despite no clinically significant narrowing (CoA index >0.8) in the r-CoA model.ConclusionsSmall alterations in aortic morphology impact on key hemodynamic indices. This may contribute to explaining phenomena such as persistent hypertension in the absence of any clinically significant narrowing. Whilst cardiovascular events in these patients may be related to hypertension, the role of arch geometry may be a contributory factor.

The pulsatile 3D-Hemodynamics in a doubly afflicted human descending abdominal artery with iliac branching

The study of patient-specific human arterial flow dynamics is well known to face challenges like a) apt geometric modelling, b) bifurcation zone meshing, and c) capturing the hemodynamic prone to variations with multiple disease complications. Due to aneurysms and stenosis in the same arterial network, the blood flow dynamics get affected, which needs to be explored. This study develops a new protocol for accurate geometric modelling, bifurcation zone meshing and numerically investigates the arterial network with abdominal aortic aneurysms (AAA) and right internal iliac stenosis (RIIAS). A realistic arterial model is reconstructed from the computed tomography (CT) data of a human subject. To understand the combined effect of the aneurysm and aortoiliac occlusive diseases in a patient, an arterial network with AAA, RIIAS, multiple branches tapering, and curvature has been considered. Clinically significant pulsatile blood flow simulations have been carried out to trace the alteration in the flow dynamics with multiple pathological complications under consideration. The transient blood flow dynamics are investigated via wall shear stress, wall pressure, velocity contour, streamlines, vorticity, and swirling strength. During the systolic deceleration phase, the rhythmic nested rapid secondary oscillatory WSS, adverse pressure gradients, high WSS, and high WP bands are noticed. Also, the above studies will help researchers, clinicians, and doctors understand the influence of morphological changes on hemodynamics in cardiovascular studies.

In Vitro Study of Endothelial Cell Morphology and Gene Expression in Response to Wall Shear Stress Induced by Arterial Stenosis.

Objectives: We examined the correlation between changes in hemodynamic characteristics induced by arterial stenosis and vascular endothelial cell (EC) morphology and gene expression in straight silicone arteries. Materials and methods: Transparent silicone straight artery models with four degrees of stenosis (0, 30, 50, and 70%) were fabricated. Particle image velocimetry was performed to screen silicone vessel structures with good symmetry and to match the numerical simulations. After the inner surface of a symmetric model was populated with ECs, it was perfusion-cultured at a steady flow rate. A computational fluid dynamics (CFD) study was conducted under the same perfusion conditions as in the flow experiment. The high-WSS region was then identified by CFD simulation. EC morphology in the high-WSS regions was characterized by confocal microscopy. ECs were antibody-stained to analyze the expression of inflammatory factors, including matrix metalloproteinase (MMP)-9 and nuclear factor (NF)-κB, which were then correlated with the CFD simulations. Results: As the degree of vascular stenosis increases, more evident jet flow occurs, and the maximum WSS position moves away first and then back. ECs were irregularly shaped at vortex flow regions. The number of gaps between the cells in high-WSS regions increased. The MMP-9 and NF-κB expression did not differ between vessels with 30 and 0% stenosis. When arterial stenosis was 70%, the MMP-9 and NF-κB expression increased significantly, which correlated with the regions of substantially high WSS in the CFD simulations. Conclusion: Stenotic arteries induce hemodynamic stress variations, which contribute to differences in EC morphology and gene expression. A high degree of vascular stenosis can directly increase inflammatory factor expression.

Hemodynamic analysis and implantation strategies of delayed intracranial aneurysm rupture after flow diverter treatment.

BackgroundDelayed aneurysm rupture after flow diverters (FDs) is a serious complication which mechanism remains unclear. The hemodynamics of FDs with proximal or distal densification implantation strategies have rarely been reported. In this study, we investigated not only the hemodynamic factors involved in postoperative rupture, but also the hemodynamic effects of different FDs implantation strategies on avoiding this complication.MethodsWe selected 2 internal carotid artery (ICA) aneurysms with similar morphological characteristics, both of which were treated with FDs but had opposite therapeutic outcomes (Case 1, ruptured after FD treatment; Case 2, recovered). The FDs strategies we designed were strategy A [with homogeneous 30% metal coverage ratio (MCR)], strategy B (with distal densification of 40% and proximal 30% MCR) and strategy C (with proximal densification of 40% and distal 30% MCR). Virtually FDs deployment and computational fluid dynamics (CFD) method were performed to simulate FDs implantation strategies and analyze the hemodynamics associated with postoperative rupture.ResultsAfter FDs implantation, the velocity of blood entering the aneurysm decreased (Case 1, 25.4%; Case 2, 30.6%), but the inflow jet impingement still existed in Case 1. The overall WSS decreased similarly in both cases, but the high WSS region hardly diminished in Case 1. For overall wall pressure, Case 2 decreased slightly but increased in Case 1. Of the three FDs implantation strategies, strategy C had the best hemodynamic effects, including the maximum blood velocity reduction and a tendency to form a more stable flow pattern, the maximum reduction rate of overall WSS and the effective diminish of high WSS area as well as the overall decrease of wall pressure.ConclusionsNot significant decrease of blood flow velocity entering the aneurysm adding persistent impact of inflow jet impingement, high WSS area that did not diminish and abnormal increase of pressure on the aneurysm wall may be causative of postoperative rupture and bleeding of ICA aneurysms. In addition, the hemodynamic effects were favorable when the FD was improved to proximal densification, which may reduce the risk of delayed aneurysm rupture following FDs treatment.KeywordsDelayed rupture; flow diverter (FD); computational fluid dynamics (CFD); intracranial aneurysm (IAs); internal carotid artery (ICA)

The Association Between Time-Varying Wall Shear Stress and the Development of Plaque Ulcerations in Carotid Arteries From the Plaque at Risk Study.

Background and Purpose: Shear stress (WSS) is involved in the pathophysiology of atherosclerotic disease and might affect plaque ulceration. In this case-control study, we compared carotid plaques that developed a new ulcer during follow-up and plaques that remained silent for their exposure to time-dependent oscillatory shear stress parameters at baseline.Materials and Methods: Eighteen patients who underwent CTA and MRI of their carotid arteries at baseline and 2 years follow-up were included. These 18 patients consisted of six patients who demonstrated a new ulcer and 12 control patients selected from a larger cohort with similar MRI-based plaque characteristics as the ulcer group. (Oscillatory) WSS parameters [time average WSS, oscillatory shear index (OSI), and relative residence time (RRT)] were calculated using computational fluid dynamics applying the MRI-based geometry of the carotid arteries and compared among plaques (wall thickness>2 mm) with and without ulceration (Mann–Whitney U test) and ulcer-site vs. non-ulcer-site within the plaque (Wilcoxon signed rank test). More detailed analysis on ulcer cases was performed and the predictive value of oscillatory WSS parameters was calculated using linear and logistic mixed-effect regression models.Results: The ulcer group demonstrated no difference in maximum WSS [9.9 (6.6–18.5) vs. 13.6 (9.7–17.7) Pa, p = 0.349], a lower maximum OSI [0.04 (0.01–0.10) vs. 0.12 (0.06–0.20) p = 0.019] and lower maximum RRT [1.25 (0.78–2.03) Pa−1 vs. 2.93 (2.03–5.28) Pa−1, p = 0.011] compared to controls. The location of the ulcer (ulcer-site) within the plaque was not always at the maximal WSS, but demonstrated higher average WSS, lower average RRT and OSI at the ulcer-site compared to the non-ulcer-sites. High WSS (WSS>4.3 Pa) and low RRT (RRT < 0.25 Pa) were associated with ulceration with an odds ratio of 3.6 [CI 2.1–6.3] and 2.6 [CI 1.54–4.44] respectively, which remained significant after adjustment for wall thickness.Conclusion: In this explorative study, ulcers were not exclusively located at plaque regions exposed to the highest WSS, OSI, or RRT, but high WSS and low RRT regions had a significantly higher odds to present ulceration within the plaque even after adjustment for wall thickness.

Computational Fluid Dynamic Technique for Assessment of How Changing Character of Blood Flow and Different Value of Hct Influence Blood Hemodynamic in Dissected Aorta.

Using computer tomography angiography (CTA) and computational structural analysis, we present a non-invasive method of mass flow rate/velocity and wall stress analysis in type B aortic dissection. Three-dimensional (3D) computer models of the aorta were calculated using pre-operative (baseline) and post-operative CT data from 12 male patients (aged from 51 to 64 years) who were treated for acute type B dissection. A computational fluid dynamics (CFD) technique was used to quantify the displacement forces acting on the aortic wall in the areas of endografts placement. The mass flow rate and wall stress were measured and quantified using the CFD technique. The CFD model indicated the places with a lower value of blood velocity and shear rate, which corelated with higher blood viscosity and a probability of thrombus appearance. Moreover, with the increase in Hct, blood viscosity also increased, while the intensity of blood flow provoked changing viscosity values in these areas. Furthermore, the velocity gradient near the tear surface caused high wall WSS; this could lead to a decreased resistance in the aorta’s wall with further implications to a patient.

Abstract P572: Cerebral Hemodynamics Underlying Artery-To-Artery Embolism in Symptomatic Intracranial Atherosclerotic Disease

Background: Artery-to-artery embolism (AAE) is a common stroke mechanism in patients with symptomatic intracranial atherosclerotic disease (ICAD), which might be associated with a higher risk of recurrent stroke than other stroke mechanisms. We aimed to investigate cerebral hemodynamic features associated with AAE in symptomatic ICAD patients. Methods: Patients with acute, anterior-circulation ischemic stroke attributed to ICAD (50-99% stenosis) confirmed in CT angiography (CTA) were recruited from two teaching hospitals. We classified probable stroke mechanisms as isolated parent artery atherosclerosis occluding penetrating artery (PAO), AAE, hypoperfusion, and mixed mechanisms, based on infarct topography in MRI and ICAD lesion features. CTA-based computational fluid dynamics (CFD) models were built to simulate blood flow across culprit ICAD lesions. Translesional pressure ratio (PR=Pressure post-stenotic /Pressure pre-stenotic ) and translesional wall shear stress ratio (WSSR=WSS stenotic-throat /WSS pre-stenotic ) were calculated, to reflect the relative change of the two hemodynamic metrics across an ICAD lesion. PR ≤ median was defined as low PR, indicating a larger pressure gradient across the lesion; and WSSR ≥ 4 th quartile as high WSSR, indicating elevated WSS upon the lesion. We associated PR and WSSR with presence of AAE as a probable stroke mechanism. Results: Among 99 symptomatic ICAD patients, 44 had AAE as a probable stroke mechanism, 13 with AAE alone and 31 with coexisting hypoperfusion; the remaining patients respectively had isolated PAO (n=18) and isolated hypoperfusion (n=37) as the probable stroke mechanisms. High WSSR was independently associated with AAE (adjusted OR 4.21; 95% CI 1.33-13.26; p=0.014). The significant, positive relationship between high WSSR and higher risk of AAE remained in those with a low PR (adjusted OR 4.01; 95% CI 1.03-15.46; p=0.044), but not in those with a normal PR (p=0.621). Conclusions: High WSS upon ICAD lesions may increase plaque vulnerability and lead to distal embolism, while sustained antegrade flow across the ICAD lesion (normal PR) may help clear the emboli. In secondary prevention of symptomatic ICAD with AAE, impaired cerebral perfusion may be a therapeutic target.

Comparative evaluation of ballet-type and conventional stent graft configurations for endovascular aneurysm repair: A CFD analysis.

PURPOSE:Cross limb stent graft (SG) configuration technique for endovascular aneurysm repair (EVAR) is employed for splayed aortic bifurcations to avoid device kinking and smoothen cannulation. The present study investigates three types of stent graft (SG) configurations for endovascular aneurysm repair (EVAR) in abdominal aortic aneurysm. A computational fluid dynamic analysis was performed on the pulsatile non-Newtonian flow characteristics in three ideally modeled geometries of abdominal aortic (AA) SG configurations.METHODS:The three planar and crosslimb SG configurations were ideally modeled, namely, top-down nonballet-type, top-down ballet-type, and bottom-up nonballet-type configurations. In top-down SG configuration, most of the device is deployed in the main body in the vicinity of renal artery and the limbs are extended to the iliac artery. While in the bottom-up configuration, some of the SG device is deployed in the main body, the limbs are deployed in aortic bifurcation, and the extra stent graft of the main body is extended to the proximal aorta until the below of the renal artery. The effects of non-Newtonian pulsatile flow on the wall stresses and flow patterns of the three models were investigated and compared. Moreover, the average wall shear stress (AWSS), oscillatory shear stress index (OSI), absolute helicity, pressure distribution, graft displacement and flow visualization plots were analyzed.RESULTS:The top-down ballet-type showed less branch blockage effect than the top-down nonballet-type models. Furthermore, the top-down ballet-type configuration showed an increased tendency to sustain high WSS and higher helicity characteristics than that of the bottom-up and top-down non-ballet type configurations. However, displacement forces of the top-down ballet-type configuration were 40% and 9.6% higher than those of the bottom-up and top-down nonballet-type configurations, respectively.CONCLUSIONS:Some complications such as graft tearing, thrombus formation, limb disconnection during long term follow up periods might be relevant to hemodynamic characteristics according to the configurations of EVAR. Hence, the reported data required to be validated with the clinical results.

Size of low wall shear stress areas in coronary arteries is related to epicardial physiology and not to microcirculatory resistance

Abstract Background Wall shear stress (WSS) plays an important role in coronary atherosclerosis. Low WSS is associated with inflammation, endothelial dysfunction, and progression of atherosclerosis; while high WSS leads to vulnerable plaque transformation and future myocardial infarction. Defining the relationship between WSS and the currently available coronary physiology indices would provide valuable insights into potential mechanisms for predicting future adverse cardiac events. Purpose To investigate the relationship between WSS and the coronary epicardial/microvascular physiology indices. Methods Patients undergoing coronary angiography and physiology testing were prospectively recruited. Physiology measurements were performed under resting and hyperaemic conditions using a pressure/temperature sensor guidewire. Fractional flow reserve (FFR), non-hyperaemic pressure ratios (NHPRs), coronary flow reserve (CFR), and corrected index of microcirculatory resistance (IMR) were measured. The NHPRs including resting full-cycle ratio (RFR), resting distal/aortic pressure (Pd/Pa), instantaneous wave-free ratio (iFR), diastolic pressure ratio (dPR) and diastolic hyperaemia-free ratio (DFR) were derived offline by a blinded expert reader. Values of FFR ≤0.80, NHPR ≤0.89, CFR &amp;lt;2, or IMR &amp;gt;25 were considered ischaemic/abnormal. Computational fluid dynamics analysis was performed and fluid motion equations were solved using finite-volume based software. The inlet and outlet boundary conditions were set to the patient-specific Pa and Pd respectively. The lesion WSS, mean WSS in five segments (WSSupstream = 5mm proximal to lesion, WSSprox = proximal third of lesion, WSSmid = middle third of lesion, WSSdistal = distal third of lesion, WSSdownstream = 5mm distal to lesion), and the total area of low WSS (defined as &amp;lt;1 Pa) along the entire vessel were calculated (Figure A). Results A total of 112 vessels from 93 patients were included in the study. The total area of low WSS was significantly larger in lesions with ischaemic FFR, NHPRs, and CFR values (Figure B), and not significantly different in lesions with abnormal IMR values. There was no significant difference in lesion WSS between groups stratified by all physiology indices. Within the lesion WSS sub-segments, WSSprox was significant higher in ischaemic lesions stratified by normal/abnormal FFR, iFR, and dPR (4.2 vs 3.3 Pa, 4.2 vs 3.3 Pa, 4.3 vs 3.3 Pa respectively, all p=0.04), and not significantly different when stratified by RFR, DFR, Pd/Pa, CFR, and IMR. Conclusion Functionally significant coronary lesions classified by the epicardial physiology indices have significantly larger total area of low WSS and higher WSSprox which may explain the higher cardiovascular event rates in patients with ischaemic lesions. There was no significant relationship between WSS and coronary microcirculatory resistance. Figure 1 Funding Acknowledgement Type of funding source: Foundation. Main funding source(s): National Heart Foundation of Australia Health Professional Scholarship

Retrograde branched extension limb assembling stent of pararenal abdominal aortic aneurysm: A longitudinal hemodynamic analysis for stent graft migration.

Pararenal abdominal aortic aneurysms (PRAAAs) are a life-threatening disease, and hemodynamic analysis may provide greater insight into the effectiveness and long-term outcomes of endovascular aneurysm repair (EVAR). However, the lack of patient-specific boundary conditions on the periphery compromises the accuracy. Windkessel (WK) boundary conditions coupled to hemodynamic follow-up models of a PRAAA patient, aims to provide insights into the link between hemodynamics and poor prognosis. One PRAAA patient underwent EVAR and reintervention after one branch of stent-graft (SG) had migrated. Totally five computational follow-up models were studied. Patient-specific flow data acquired via ultrasound were used to define the boundary conditions in the ascending aorta and the following three branches. Coupled zero-dimensional WK models representing the distal vasculature were used to define the outlet boundary conditions under the abdomen. Flow divisions of the main SG branches were 40.7% and 24.7%, respectively. Time-averaged wall shear stress and oscillatory shear index (OSI) increased at the junction connected the SG branch and the stent leading to the right common iliac artery (RCIA) where the stent migrated. The OSI and relative residence time (RRT) value in superior mesenteric artery increased notably after the migration, the RRT continuously increased following the reintervention. Unbalanced flow, resulting in locally high-speed flow, high WSS and OSI might significantly affect stent stability. Results suggest that diameters and interconnection design of stents in complex cases should take the flow division into consideration and computational simulations might be considered as a tool for intervention protocol design.