High-valent Metal-oxo Species Research Articles

CO2(OH)2CO3 and Fe doped Co2(OH)2CO3 prepared as efficient and stable catalysts for activation of PMS: Two systems comparison and key role of high-valent metal-oxo species in mechanism revealing

High-valent metal-oxo species [M(IV) = O] exhibited high selectivity and chemical efficiency in advanced oxidation processes for removing organic pollutants, making their manipulation essential in catalytic systems. However, the low and unsustainable efficiency of generating M(IV) = O posed significant challenges. In this research, Co2(OH)2CO3 were successfully prepared via a one-pot hydrothermal method to efficiently activate peroxymonosulfate (PMS) with high-valent cobalt-oxo species [Co (IV) = O] as the primary active oxidation species. Building upon this foundation, COC was modified through variations in metal types and elemental ratios, in which magnetically enriched FexCo2-x(OH)2CO3 was synthesized by gradient Fe doping with higher catalytic efficiency and stability. The insertion of Fe resulted in the lengthening of the Co-O bond and improved the valence distribution of cobalt on the COC surface. Besides, it enabled part of the electrons to be transferred from the Fe active center to the Co active center, breaking the limitation of the traditional two-electron transfer and realizing the stable generation of more high-valent metals. Both reaction systems achieved efficient degradation of sulfadimethoxine (SDM) within 30 min and were able to completely degrade SDM within 30 min even after three cycles. FexCo2-x(OH)2CO3 maintained excellent catalytic performance even after 30 days of exposure to air. In both systems, high-valence metals played a dominant role, while the contributions of hydroxyl radicals and sulfate radicals were negligible. Overall, the two groups of developed catalysts both showed remarkable stability and pollutant removal performance in anions, humic acid, Different antibiotics and real water systems, which provided a new perspective on antibiotic removal.

Picolinic acid-mediated Mn(II) activated periodate for ultrafast and selective degradation of emerging contaminants: Key role of high-valent Mn-oxo species

The utilization of periodate (PI, IO4-) in metal-based advanced oxidation processes (AOPs) for the elimination of emerging contaminants (ECs) have garnered significant attention. However, the commonly used homogeneous metal catalyst Mn(II) performs inadequately in activating PI. Herein, we exploited a novel AOP technology by employing the complex of Mn(II) with the biodegradable picolinic acid (PICA) to activate PI for the degradation of electron-rich pollutants. The performance of the Mn(II)-PICA complex surpassed that of ligand-free Mn(II) and other Mn(II) complexes with common aminopolycarboxylate ligands. Through scavenger, sulfoxide-probe transformation, and 18O isotope-labeling experiments, we confirmed that the dominant reactive oxidant generated in the Mn(II)-PICA/PI system was high-valent manganese-oxo species (Mn(V)=O). Due to its reliance on Mn(V)=O, the Mn(II)-PICA/PI process exhibited remarkable selectivity and strong anti-interference during EC oxidation in complex water matrices. Nine structurally diverse pollutants were selected for evaluation, and their lnkobs values in the Mn(II)-PICA/PI system correlated well with their electrophilic/nucleophilic indexes, EHOMO, and vertical IP (R2 = 0.79–0.94). Additionally, IO4- was converted into non-toxic iodate (IO3-) without producing undesired iodine species such as HOI, I2, and I3-. This study provides a novel protocol for metal-based AOPs using PI in combination with chelating agents and high-valent metal-oxo species formation during water purification.

Mechanism Insights into Allylic Hydroxylation versus Epoxidation of Propene Catalyzed by Model Catalyst Iron Phthalocyanine in the Presence of Hydrogen Peroxide.

High-valent metal-oxo species are key reactive intermediates in many biological and biological oxidation reactions. Herein, allylic hydroxylation (C-H) versus epoxidation (C═C) reactions of propene with a model catalyst iron phthalocyanine (FePc) in the presence of hydrogen peroxide were investigated contrastively, aiming to probe the active intermediates, structure-activity relationship, and reaction pathways. Our results showed that H2O2 as an oxygen-donor reagent can be easily decomposed on FePc to produce key active intermediates O═FePc and O═FePc═O with the energy barriers of 19.57 and 23.89 kcal/mol, respectively. In the selective oxidation of propene, O═FePc has a small preference for C═C epoxidation over C-H hydroxylation while O═FePc═O has a small preference for C-H hydroxylation. Since the electron-withdrawing O axial ligand in O═FePc═O further increases the radical character (Fe-O·) and Fe-O bond length of the iron-oxo moiety, O═FePc═O has better catalytic performance in both C═C epoxidation and C-H hydroxylation than O═FePc. Furthermore, in the whole reaction processes, the dual-hydrogen bonds between the two terminal H atoms of the alkene and allylic groups of propene and oxygen atom of the iron-oxo moiety would lead to the reaction toward C═C epoxidation while the single-hydrogen bond between the terminal H atom of the allylic group and the oxygen atom of the iron-oxo moiety would lead to the reaction toward C-H hydroxylation, implying that the weakly interacting hydrogen bonds affecting oxidation pathways also play a very important role in the regioselectivity of C═C epoxidation and C-H hydroxylation.

Synergistic Coordination in Cu Single-Atom Catalysts Enhances High-Valent Copper-Oxo Species for Efficient PMS Activation.

In the domain of heterogeneous catalytic activation of peroxymonosulfate (PMS), high-valent metal-oxo (HVMO) species are widely recognized as potent oxidants for the abatement of organic pollutants. However, the generation selectivity and efficiency of HVMO are often constrained by stringent requirements for catalyst adsorption sites and electron transfer efficiency. In this study, a single-atom catalyst, CuSA/CNP&S, is synthesized featuring multiple types (planar/axial) of heteroatom coordination via an H-bond-assisted self-assembly strategy. It isconfirmed that CuN3 active centers with axial S coordination are uniformly distributed in a carbon matrix modified by planar P atoms. CuSA/CNP&S activated PMS to selectively generate Cu(III)═OH species as the primary reactive oxygen species (ROS). The pseudo-first-order kinetic rate for bisphenol A degradation reached 1.51min-1, a 17.57-fold increase compared to the unmodified CuSA/CN catalyst. Additionally, the CuSA/CNP&S catalyst demonstrates high efficiency and durability in removing contaminants from various aqueous matrices. Theoretical calculations and experimental results indicate that the intrinsic electric field generated by distal planar P atoms enhances electron transfer efficiency within the carbon matrix. Meanwhile, axial S coordination elevates the d-band center and tunes the eg * band broadening of Cu, thereby enhancing the adsorption selectivity for the terminal oxygen of PMS. This multitype coordination synergistically mitigates the issues of low selectivity and yield of HVMO species.

Support work-function dependent Fenton-like catalytic activity of Co single atoms for selective cobalt(IV)=O generation

In Fenton-like reactions, high-valent cobalt-oxo (CoIV=O) has attracted increasing interests due to high redox potential, long lifetime, and anti-interference properties, but its generation is hindered by the electron repulsion between the electron rich oxo- and cobalt centers. Here, we demonstrate CoIV=O generation from peroxymonosulfate (PMS) activation over cobalt single-atom catalysts (Co-SACs) using in-situ Co K-edge X-ray absorption spectra, and discern that CoIV=O generation is dependent on the support work-function (WF) due to the strong electronic metal-support interaction (EMSI). Supports with a high WF value like anatase-TiO2 facilitate the binding of PMS-terminal oxo-ligand to Co sites by extracting Co-d electrons, thus decreasing the generation barrier for the critical intermediate (Co-OOSO32−). The Co atoms anchored on anatase-TiO2 (Co-TiO2) exhibited enhanced CoIV=O generation and superior activity for sulfamethoxazole (SMX) degradation during PMS activation. The normalized steady-state concentration of CoIV=O in Co-TiO2/PMS system was three orders of magnitude higher than that of free radicals, and 1.3- to 11-fold higher than that generated in other Co-SACs/PMS systems. Co-TiO2/PMS sustained efficient removal of SMX with minimal Co2+ leaching under continuous flow operation, suggesting its attractive water purification potential. Overall, these results underscore the significance of support selection for enhanced generation of high-valent metal-oxo species and efficient PMS activation in supported metal SACs.

High valent manganese-oxo species activation of peroxymonosulfate by different phases manganese oxides nanoplates for catalytic water decontamination

Advanced oxidation processes involving high-valent metal-oxo species have garnered increasing attention for their effective pollutant degradation in water. However, less is known about the mechanism of the species in the manganese oxides (MnOx) system. Therefore, it is crucial to design MnOx catalysts to systematically clarify the high-valent metal-oxo species reaction mechanism. In this study, MnOx nanoplates including Mn3O4, Mn5O8, and Mn2O3 were synthesized via a facile thermal treatment of a Mn(OH)2 precursor to activate peroxymonosulfate (PMS) for mechanism studies. The Mn3O4 catalyst exhibited superior catalytic performance and reusability owing to its unique spinel structure and rapid electron transfer properties. The first-order rate constant for Mn3O4 is 0.64 min−1, which is 3.7 and 1.5 times higher than those of Mn5O8 and Mn2O3, respectively. Scavenging experiments, electron paramagnetic resonance, and electrochemical analysis revealed that free radicals played a negligible role, while the formation of high-valent Mn-oxo species was promoted, facilitated by the Mn3O4-PMS* complex. These high-valent Mn-oxo species were highly reactive towards various pollutants. Moreover, the degradation intermediates of bisphenol A (BPA) in the Mn3O4/PMS system were identified, further elucidating the interactions between high-valent Mn-oxo species and BPA. Additionally, the Mn3O4 catalyst exhibited excellent catalytic performance under practical conditions and maintained superior stability over six cycles. This work provides crucial insights into the role of transition metal oxides in activating PMS for the catalytic degradation of emerging pollutants.

The “4 + 1” strategy fabrication of iron single-atom catalysts with selective high-valent iron-oxo species generation

Single-atom catalysts (SACs) with atomic dispersion active sites have exhibited huge potentials in peroxymonosulfate (PMS)-based Fenton-like chemistry in water purification. However, four-N coordination metal (MN4) moieties often suffer from such problems as low selectivity and narrow workable pH. How to construct SACs in a controllable strategy with optimized electronic structures is of great challenge. Herein, an innovative strategy (i.e., the "4 + 1" fabrication) was devised to precisely modulate the first-shell coordinated microenvironment of FeN4 SAC using an additional N (SA-FeN5). This leads to almost 100% selective formation of high-valent iron-oxo [Fe(IV)═O] (steady-state concentration: 2.00 × 10-8 M) in the SA-FeN5/PMS system. In-depth theoretical calculations unveil that FeN5 configuration optimizes the electron distribution of monatomic Fe sites, which thus fosters PMS adsorption and reduces the energy barrier for Fe(IV)═O generation. SA-FeN5 was then attached to polyvinylidene difluoride membrane for a continuous flow device, showing long-term abatement of the microcontaminant. This work furnishes a general strategy for effective PMS activation and selective high-valent metal-oxo species generation by high N-coordination number regulation in SACs, which would provide guidance in the rational design of superior environmental catalysts for water purification.

The Surface Confinement of FeO Assists in the Generation of Singlet Oxygen and High-Valent Metal-Oxo Species for Enhanced Fenton-Like Catalysis.

Transition metal compounds (TMCs) have long been potential candidate catalysts in persulfate-based advanced oxidation process (PS-AOPs) due to their Fenton-like catalyze ability for radical generation. However, the mechanism involved in TMCs-catalyzed nonradical PS-AOPs remains obscure. Herein, the growth of FeO on the Fe3O4/carbon precursor is regulated by restricted pyrolysis of MIL-88A template to activate peroxymonosulfate (PMS) for tetracycline (TC) removal. The higher FeO incorporation conferred a 2.6 times higher degradation performance than that catalyzed by Fe3O4 and also a higher interference resistance to anions or natural organic matter. Unexpectedly, the quenching experiment, probe method, and electron paramagnetic resonance quantitatively revealed that the FeO reassigned high nonradical species (1O2 and FeIV═O) generation to replace original radical system created by Fe3O4. Density functional theory calculation interpreted that PMS molecular on strongly-adsorbed (200) and (220) facets of FeO enjoyed unique polarized electronic reception for surface confinement effect, thus the retained peroxide bond energetically supported the production of 1O2 and FeIV═O. This work promotes the mechanism understanding of TMCs-induced surface-catalyzed persulfate activation and enables them better perform catalytic properties in wastewater treatment.

Bioinspired axial S-coordinated single-atom cobalt catalyst to efficient activate peroxymonosulfate for selective high-valent Co-Oxo species generation

The efficient activation and selective high-valent metal-oxo (HVMO) species generation remain challenging for peroxymonosulfate (PMS)-based advanced oxidation processes (PMS-AOPs) in water purification. The underlying mechanism of the activation pathway is ambiguous, leading to a massive dilemma in the control and regulation of HVMO species generation. Herein, bioinspired by the bio-oxidase structure of cytochrome P450, the axial coordination strategy was adopted to tailor a single-atom cobalt catalyst (CoN4S-CB) with an axial S coordination. CoN4S-CB high-selectively generated high-valent Co-Oxo species (Co(IV)=O) via PMS activation. Co(IV)=O demonstrated an ingenious oxygen atom transfer (OAT) reaction to achieve the efficient degradation of sulfamethoxazole (SMX), and this allowed robust operation in various complex environments. The axial S coordination modulated the 3d orbital electron distribution of the Co atom. Density functional theory (DFT) calculation revealed that the axial S coordination decreased the energy barrier for PMS desorption and lowered the free energy change (ΔG) for Co(IV)=O generation. CoN4S-PMS* had a narrow d-band close to the Fermi level, which enhanced charge transfer to accelerate the cleavage of O-O and O-H bonds in PMS. This work provides a broader perspective on the activator design with natural enzyme structure-like active sites to efficient activate PMS for selective HVMO species generation.

Tailoring d-band center of high-valent metal-oxo species for pollutant removal via complete polymerization

Polymerization-driven removal of pollutants in advanced oxidation processes (AOPs) offers a sustainable way for the simultaneous achievement of contamination abatement and resource recovery, supporting a low-carbon water purification approach. However, regulating such a process remains a great challenge due to the insufficient microscopic understanding of electronic structure-dependent reaction mechanisms. Herein, this work probes the origin of catalytic pollutant polymerization using a series of transition metal (Cu, Ni, Co, and Fe) single-atom catalysts and identifies the d-band center of active site as the key driver for polymerization transfer of pollutants. The high-valent metal-oxo species, produced via peroxymonosulfate activation, are found to trigger the pollutant removal via polymerization transfer. Phenoxyl radicals, identified by the innovative spin-trapping and quenching approaches, act as the key intermediate in the polymerization reactions. More importantly, the oxidation capacity of high-valent metal-oxo species can be facilely tuned by regulating their binding strength for peroxymonosulfate through d-band center modulation. A 100% polymerization transfer ratio is achieved by lowering the d-band center. This work presents a paradigm to dynamically modulate the electronic structure of high-valent metal-oxo species and optimize pollutant removal from wastewater via polymerization.

Sulfidation of Ni-Fe-LDH for enhanced Fenton-like catalysis: Experimental validation and theoretical calculation

In this study, peroxymonosulfate (PMS) activation of Ni-Fe layered double hydroxide (Ni-Fe-LDH) toward to Tetracycline hydrochloride (TC) degradation was enhanced by sulfidation. When compared to the catalytic performance of Ni-Fe-LDH, the kinetic rate constant of the S-Ni-Fe-LDH/PMS system was 6.3 times higher than that of the Ni-Fe-LDH/PMS system. The degradation process in the S-Ni-Fe-LDH/PMS system was successfully achieved through the combined efforts of both radical and nonradical pathways, with singlet oxygen playing a key role in the process. The boosted performance brought by sulfidation was lie in: (i) the superior electrical conductivity; (ii) the low redox potential of S2- that facilitate metal redox in LDH; (iii) the production of 1O2 has been found to be increased in S-Ni-Fe-LDH compared to Ni-Fe-LDH, due to the higher energy desorption exhibited by S-Ni-Fe-LDH towards radical species; (iv) noteworthily, a new generation of high-valent metal-oxo species in S-Ni-Fe-LDH/PMS system. Consequently, the S-Ni-Fe-LDH/PMS system displayed satisfactory degradation efficiency in a broad pH range of 3–11 and even under the presence of inorganic ions and humic acid, as well as continuous-flow catalytic process. Based on the identification of transformation intermediates using HPLC-MS, three potential pathways for TC decomposition were deduced. The analysis conducted using ECOSAR demonstrated that the toxic effects decreased for the majority of transformation products during TC degradation. This work introduces new opportunities for designing highly efficient LDH-based catalysts for the decomposition of organic pollutants in water solutions.

Correlating active sites and oxidative species in single-atom catalyzed Fenton-like reactions.

Single-atom catalysts (SACs) have gained widespread popularity in heterogeneous catalysis-based advanced oxidation processes (AOPs), owing to their optimal metal atom utilization efficiency and excellent recyclability by triggering reactive oxidative species (ROS) for target pollutant oxidation in water. Systematic summaries regarding the correlation between the active sites, catalytic activity, and reactive species of SACs have rarely been reported. This review provides an overview of the catalytic performance of carbon- and metal oxide-supported SACs in Fenton-like reactions, as well as the different oxidation pathways induced by the metal and non-metal active sites, including radical-based pathways (e.g., ·OH and SO4˙-) and nonradical-based pathways (e.g. 1O2, high-valent metal-oxo species, and direct electron transfer). Thereafter, we discuss the effects of metal types, coordination environments, and spin states on the overall catalytic performance and the generated ROS in Fenton-like reactions. Additionally, we provide a perspective on the future challenges and prospects for SACs in water purification.

C-H bond activation by high-valent iron/cobalt-oxo complexes: a quantum chemical modeling approach.

High-valent metal-oxo species serve as key intermediates in the activation of inert C-H bonds. Here, we present a comprehensive DFT analysis of the parameters that have been proposed as influencing factors in modeled high-valent metal-oxo mediated C-H activation reactions. Our approach involves utilizing DFT calculations to explore the electronic structures of modeled FeIVO (species 1) and CoIVO ↔ CoIII-O˙ (species 2), scrutinizing their capacity to predict improved catalytic activity. DFT and DLPNO-CCSD(T) calculations predict that the iron-oxo species possesses a triplet as the ground state, while the cobalt-oxo has a doublet as the ground state. Furthermore, we have investigated the mechanistic pathways for the first C-H bond activation, as well as the desaturation of the alkanes. The mechanism was determined to be a two-step process, wherein the first hydrogen atom abstraction (HAA) represents the rate-limiting step, involving the proton-coupled electron transfer (PCET) process. However, we found that the second HAA step is highly exothermic for both species. Our calculations suggest that the iron-oxo species (Fe-O = 1.672 Å) exhibit relatively sluggish behavior compared to the cobalt-oxo species (Co-O = 1.854 Å) in C-H bond activation, attributed to a weak metal-oxygen bond. MO, NBO, and deformation energy analysis reveal the importance of weakening the M-O bond in the cobalt species, thereby reducing the overall barrier to the reaction. This catalyst was found to have a C-H activation barrier relatively smaller than that previously reported in the literature.

Binary MOFs-derived Mn-Co3O4 for efficient peroxymonosulfate activation to remove sulfamethoxazole: Oxygen vacancy-assisted high-valent cobalt-oxo species generation

High-valent cobalt-oxo species show obvious advantages in oxidant utilization efficiency and selective oxidation of organic pollutants, while reducing the energy barrier of OO bond cleavage of peroxymonosulfate (PMS) to continuously produce high-valent cobalt-oxo species remains challenging. Herein, binary metal–organic frameworks-derived Mn-Co3O4 was synthesized and utilized to activate PMS for sulfamethoxazole removal. Almost 100 % of sulfamethoxazole was removed within 10 min by Mn-Co3O4/PMS system and the reaction rate constant was 0.3148 min−1. Moreover, Mn doping improved oxygen vacancies content in Mn-Co3O4 and reduced the leaching of cobalt ions. The results exhibited that hydroxyl radicals, sulfate radicals, superoxide radicals, singlet oxygen, electron transfer mediated by metal-PMS*, and high-valent cobalt-oxo species resulted in the sulfamethoxazole removal and their contributions were highly dependent on pH values. Under acidic, neutral, and weakly basic conditions, singlet oxygen-dominant non-radical oxidation was the primary pathway. While under strong alkaline conditions, radical oxidation was the primary pathway, in which superoxide radicals and hydroxyl radicals played dominant roles. It was also found that both acidic and alkaline conditions were conducive to high-valent cobalt-oxo species production. The formation process of high-valent cobalt-oxo species was revealed through density functional theory calculations. It has been demonstrated that oxygen vacancies decreased the adsorption energy of PMS onto Mn-Co3O4 and the energy barrier of OO bond breakage of PMS in Co(II)-PMS*, promoting the generation of high-valent cobalt-oxo. Additionally, the Mn-Co3O4/PMS system showed desirable potential for eliminating refractory organic pollutants from actual waterbodies. This study deepens the understanding of defect engineering-assisted high-valent metal-oxo species formation mechanism.

High-valent metal-oxo species heterogeneous activation making use of MoS2 in a novel Electro-Fenton System: pH-independent catalytic environment and nonradical generation mechanism

High-valent metal-oxo (HVMO) species emerge as promising reactive species for decontamination owing to its long and stable life expectancy. Nevertheless, it is challenging to generate HVMO using solid-phase catalysts, considering high orbital occupancy of transition metals disfavor electron migrations. Herein, we propose a universal MoS2 co-catalyst capable of inducing electronic delocalization in a layered double hydroxide composite of Co and Fe, in turn acting as a HVMO evolution booster. In this heterogeneous electro-Fenton system, the spontaneous generation of high-valent cobalt-oxo (CoIV = O) and high-valent iron-oxo (FeIV = O, FeV = O and FeVI = O) was facilitated by MoS2 configuration, accepting self-motivated electron transfer, pivotally shifting d-band centers and lowering the energy barrier by 2.81–11.62 eV. Noteworthy, HVMO production at pH 9 compensated for the sluggish Fenton’s reaction rate in alkaline, increasing over 20 % contaminant decay and shortening treatment time by ∼ 4 h even in practical aqueous matrices (tap and river water). Depending upon the pH, HVMO exhibits a distinct degradation pathway of norfloxacin (model organics), compared with other reactive oxygen species, yielding different intermediates of varying toxicity levels. This study comprehensively showcased the feasibility of activating HVMO generation by MoS2 in heterogeneous mediation, unveiled a pH-independent strategy to degrade pollutants, thereby expanding the applicability of Fenton’s technology.

Unravelling the Effect of Acid-Driven Electron Transfer in High-Valent FeIV =O/MnIV =O Species and Its Implications for Reactivity.

The electron transfer (ET) step is one of the crucial processes in biochemical redox reactions that occur in nature and has been established as a key step in dictating the reactivity of high-valent metal-oxo species. Although metalloenzymes possessing metal-oxo units at their active site are typically associated with outer-sphere electron transfer (OSET) processes, biomimetic models, in contrast, have been found to manifest either an inner-sphere electron transfer (ISET) or OSET mechanism. This distinction is clearly illustrated through the behaviour of [(N4Py)MnIV (O)]2+ (1) and [(N4Py)FeIV (O)]2+ (2) complexes, where complex 1 showcases an OSET mechanism, while complex 2 exhibits an ISET mechanism, especially evident in their reactions involving C-H bond activation and oxygen atom transfer reactions in the presence of a Lewis/Bronsted acid. However, the precise reason for this puzzling difference remains elusive. This work unveils the origin of the perplexing inner-sphere vs outer-sphere electron transfer process (ISET vs OSET) in [(N4Py)MnIV (O)]2+ (1) and [(N4Py)FeIV (O)]2+ (2) species in the presence of Bronsted acid. The calculations indicate that when the substrate (toluene) approaches both 1 and 2 that is hydrogen bonded with two HOTf molecules (denoted as 1-HOTf and 2-HOTf, respectively), proton transfer from one of the HOTf molecules to the metal-oxo unit is triggered and a simultaneous electron transfer occurs from toluene to the metal centre. Interestingly, the preference for OSET by 1-HOTf is found to originate from the choice of MnIV =O centre to abstract spin-down (β) electron from toluene to its δ(dxy ) orbital. On the other hand, in 2-HOTf, a spin state inversion from triplet to quintet state takes place during the proton (from HOTf) coupled electron transfer (from toluene) preferring a spin-up (α) electron abstraction to its σ* (dz 2 ) orbital mediated by HOTf giving rise to ISET. In addition, 2-HOTf was calculated to possess a larger reorganisation energy, which facilitates the ISET process via the acid. The absence of spin-inversion and smaller reorganisation energy switch the mechanism to OSET for 1-HOTf. Therefore, for the first time, the significance of spin-state and spin-inversion in the electron transfer process has been identified and demonstrated within the realm of high-valent metal-oxo chemistry. This discovery holds implications for the potential involvement of high-valent Mn-oxo species in performing similar transformative processes within Photosystem II.

Probing the Origins of Puzzling Reactivity in Fe/Mn-Oxo/Hydroxo Species toward C-H Bonds: A DFT and Ab Initio Perspective.

Activation of C-H bonds using an earth-abundant metal catalyst is one of the top challenges of chemistry, where high-valent Mn/Fe-oxo(hydroxo) biomimic species play an important role. There are several open questions related to the comparative oxidative abilities of these species, and a unifying concept that could accommodate various factors influencing reactivity is lacking. To shed light on these open questions, here, we have used a combination of density functional theory (DFT) (B3LYP-D3/def2-TZVP) and ab initio (CASSCF/NEVPT2) calculations to study a series of high-valent metal-oxo species [Mn+H3buea(O/OH)] (M = Mn and Fe, n = II to V; H3buea = tris[(N'-tert-butylureaylato)-N-ethylene)]aminato towards the activation of dihydroanthracene (DHA). The H-bonding network in the ligand architecture influences the ground state-excited state gap and brings several excited states of the same spin multiplicity closer in energy, which triggers reactivity via one of those excited states, reducing the kinetic barriers for the C-H bond activation and rationalizing several puzzling reactivity trends observed in various high-valent Mn/Fe-oxo(hydroxo) species.

Fe-Mn oxycarbide anchored on N-doped carbon for enhanced Fenton-like catalysis: Importance of high-valent metal-oxo species and singlet oxygen

A nonradical oxidation-based peroxymonosulfate (PMS) activation is an attractive process for pollutant elimination. Herein, a dual-metal-organic framework (MOF) assisted strategy to construct magnetic Fe-Mn oxycarbide anchored on N-doped carbon (FeMn@NC) was proposed for PMS activation. It was found that FeMn@NC-800 displayed superior activity than other comparable counterparts, with nearly 100 % degradation of sulfamethazine (SMZ) within 30 min. Electron paramagnetic resonance and quenching tests revealed that nonradical oxidation (1O2 and high-valent metal-oxo species) dominated the SMZ degradation process. Experimental and theoretical calculations demonstrated that FeMn oxycarbide preferred adsorbing the terminal O of PMS, which could improve the PMS oxidization to produce SO5•−, further generating 1O2. Moreover, dual active sites could lower the energy barrier to cleave the O−O bond of PMS to form high-valent FeMn＝O species. The present study provided a clue to rationally design high-performance heterogeneous catalysts and proposed a novel nonradical-based catalytic oxidation for environmental cleaning.

Peroxymonosulfate activation by a bimetallic catalyst with Fe nanoclusters and Co single-atoms on C3N4 (FeNCCoSA-C3N4) for oxidation of organic pollutants via radical and nonradical pathways

Catalysts with metal nanocluster and single-atom sites have been used extensively to activate persulfate to remove recalcitrant pollutants while the bimetallic catalyst remains limited researches. Here, a bimetallic C3N4 catalyst with relatively high Fe nanocluster and single-atom Co loadings (7.6% and 3.7%, respectively) (FeNCCoSA-C3N4) was successfully synthesized. FeNCCoSA-C3N4 showed a synergistic coefficient of 7.8 relative to Fe-C3N4 and Co-C3N4 for degrading paracetamol, remarkedly outperforming the counterpart monometallic heterogeneous catalysts, metal ions homogeneous catalyst, or previously reported catalysts in terms of peroxymonosulfate (PMS) activation and paracetamol mitigation. The FeNCCoSA-C3N4/PMS complex contributed to > 60% of paracetamol degradation, whereas radical species and high-valent metal-oxo species contributed 13.3%–15.6% of paracetamol degradation. FeNCCoSA-C3N4/PMS preferentially oxidizes organic pollutants containing electron-donating moieties but may be negatively affected by inorganic carbon and chloride ions. Synthesizing the bimetallic cluster/atom catalyst offers a new way of achieving efficient PMS activation and pollutant oxidation via catalyst/PMS complex formation and electron-transfer reactions.

Activation of peroxymonosulfate by Fe–Mn-modified MWCNTs for selective decontamination: Formation of high-valent metal-oxo species and superoxide anion radicals

The extensive presence of organic micropollutants in complex water matrices requires the development of selective oxidation technologies. In this study, a novel selective oxidation process was developed via the conjunction of FeMn/CNTs with peroxymonosulfate and successfully used to remove micropollutants such as sulfamethoxazole (SMX) and bisphenol A from aqueous solutions. FeMn/CNTs were prepared using a facile co-precipitation method, characterized using a series of surface characterization techniques, and then tested for pollutant removal. The results showed that the FeMn/CNTs had much greater reactivity than CNTs, manganese oxide, and iron oxide. The pseudo-first-order rate constant with FeMn/CNTs was more than 2.9–5.7 times that of the other tested materials. The FeMn/CNTs had great reactivity in a wide range of pH values from 3.0 to 9.0, with the best reactivity found at pH values of 5.0 and 7.0. High-valent metal-oxo species such as Fe(IV)O and Mn(IV)O and superoxide anion radicals were determined to be the reactive species and were responsible for the oxidation of SMX. These reactive species were selective; therefore, the overall removal performance of SMX was not obviously influenced by high levels of water components including chloride ions, bicarbonates, and natural organic matters. The results from this study may promote the design and application of selective oxidation technologies for micropollutant abatement.