High-throughput Protein Purification Research Articles

Disease-Associated Mutations in Tau Encode for Changes in Aggregate Structure Conformation.

The accumulation of tau fibrils is associated with neurodegenerative diseases, which are collectively termed tauopathies. Cryo-EM studies have shown that the packed fibril core of tau adopts distinct structures in different tauopathies, such as Alzheimer's disease, corticobasal degeneration, and progressive supranuclear palsy. A subset of tauopathies are linked to missense mutations in the tau protein, but it is not clear whether these mutations impact the structure of tau fibrils. To answer this question, we developed a high-throughput protein purification platform and purified a panel of 37 tau variants using the full-length 0N4R splice isoform. Each of these variants was used to create fibrils in vitro, and their relative structures were studied using a high-throughput protease sensitivity platform. We find that a subset of the disease-associated mutations form fibrils that resemble wild-type tau, while others are strikingly different. The impact of mutations on tau structure was not clearly associated with either the location of the mutation or the relative kinetics of fibril assembly, suggesting that tau mutations alter the packed core structures through a complex molecular mechanism. Together, these studies show that single-point mutations can impact the assembly of tau into fibrils, providing insight into its association with pathology and disease.

Incorporation of automated buffer exchange empowers high-throughput protein and plasmid purification for downstream uses.

The continued acceleration of time-to-market product development and rising demand for biotherapeutics have hastened the need for higher throughput within the biopharmaceutical industry. Automated liquid handlers (ALH) are increasingly popular due to flexible programming that enables processing of multiple samples with an array of functions. This flexibility is useful in streamlining research that requires chromatographic procedures to achieve product purity for downstream analysis. However, purification of biologics often requires additional off-deck buffer exchange steps due to undesirable elution conditions such as high acid or high salt content. Expanding the capability of ALHs to perform purification in sequence with buffer exchange would, therefore, increase workflow efficiency by eliminating the need for manual intervention, thus expediting sample preparation. Here we demonstrate two different automated purifications using pipet-based dispersive solid-phase extraction (dSPE). The first is an affinity purification of His-tagged proteins from bacterial lysate. The second is an anion-exchange purification of plasmid DNA. Both methods are followed by buffer exchange performed by an ALH. Percent recoveries for the three purified recombinant proteins ranged from 51 ± 1.2 to 86 ± 10%. The yields were inversely correlated to starting sample load and protein molecular weight. Yields for plasmid purification ranged between 11.4 ± 0.8 and 13.7 ± 0.9 µg, with the largest plasmid providing the highest yield. Both programs were rapid, with protein purification taking <80 minutes and plasmid purification <60 minutes. Our results demonstrate that high-quality, ready-to-use biologics can be obtained rapidly from a crude sample after two separate chromatographic processes without manual intervention.

Adaptation of the binding domain of Lactobacillus acidophilus S-layer protein as a molecular tag for affinity chromatography development.

The S-layer proteins are a class of self-assembling proteins that form bi-dimensional lattices named S-Layer on the cell surface of bacteria and archaea. The protein SlpA, which is the major constituent of the Lactobacillus acidophilus S-layer, contains in its C-terminus region (SlpA284 - 444), a protein domain (named here as SLAPTAG) responsible for the association of SlpA to the bacterial surface. SLAPTAG was adapted for the development of a novel affinity chromatography method: the SLAPTAG-based affinity chromatography (SAC). Proteins with different molecular weights or biochemical functions were fused in-frame to the SLAPTAG and efficiently purified by a Bacillus subtilis-derived affinity matrix (named Bio-Matrix or BM). Different binding and elution conditions were evaluated to establish an optimized protocol. The binding equilibrium between SLAPTAG and BM was reached after a few minutes of incubation at 4°C, with an apparent dissociation constant (KD) of 4.3μM. A reporter protein (H6-GFP-SLAPTAG) was used to compare SAC protein purification efficiency against commercial immobilized metal affinity chromatography. No differences in protein purification performance were observed between the two methods. The stability and reusability of the BM were evaluated, and it was found that the matrix remained stable for more than a year. BM could be reused up to five times without a significant loss in performance. Additionally, the recovery of bound SLAP-tagged proteins was explored using proteolysis with a SLAP-tagged version of the HRV-3c protease (SLAPASE). This released the untagged GFP while the cut SLAPTAG and the SLAPASE were retained in the BM. As an alternative, iron nanoparticles were linked to the BM, resulting in BMmag. The BMmag was successfully adapted for a magnetic SAC, a technique with potential applications in high-throughput protein production and purification. The SAC protocol can be adapted as a universal tool for the purification of recombinant proteins. Furthermore, the SAC protocol utilizes simple and low-cost reagents, making it suitable for in-house protein purification systems in laboratories worldwide. This enables the production of pure recombinant proteins for research, diagnosis, and the food industry.

Investigating peak dispersion in free-flow counterflow gradient focusing.

Free-flow electrophoresis (FFE) enables the continuous separation and collection of charged solutes, and as a result, it has drawn interest as both a preparative and an analytical tool for biological applications. Recently, a free-flow counterflow gradient focusing (FF-CGF) mechanism has been proposed with the goal of improving the resolution and versatility of FFE. To realize this potential, the factors that influence solute dispersion deserve further attention, including the gradient strength and the parabolic profile of the counterflow. Therefore, the goal of this work is to develop a theoretical model to study the interplay between these factors and molecular diffusion. Overall, an asymmetric solute distribution emerges for a wide range of parameters, and this behavior can be characterized with an exponentially modified Gaussian function. Results show that FF-CGF can achieve high-resolution separations, with the potential for high-throughput protein purification. Moreover, this work provides a practical guide for optimizing experimental conditions, as well as a strong framework for understanding and developing FF-CGF further.

An Economical and Versatile High-Throughput Protein Purification System Using a Multi-Column Plate Adapter

A multi-column plate adapter allows chromatography columns to be interfaced with multi-well collection plates for parallel affinity or ion exchange purification providing an economical high throughput protein purification method. It can be used under gravity or vacuum yielding milligram quantities of protein via affordable instrumentation.

An Economical and Versatile High-Throughput Protein Purification System Using a Multi-Column Plate Adapter.

Protein purification is imperative to the study of protein structure and function and is usually used in combination with biophysical techniques. It is also a key component in the development of new therapeutics. The evolving era of functional proteomics is fueling the demand for high-throughput protein purification and improved techniques to facilitate this. It was hypothesized that a multi column plate adaptor (MCPA) can interface multiple chromatography columns of different resins with multi-well plates for parallel purification. This method offers an economical and versatile method of protein purification that can be used under gravity or vacuum, rivaling the speed of an automated system. The MCPA can be used to recover milligram yields of protein by an affordable and time efficient method for subsequent characterization and analysis. The MCPA has been used for high-throughput affinity purification of SH3 domains. Ion exchange has also been demonstrated via the MCPA to purify protein post Ni-NTA affinity chromatography, indicating how this system can be adapted to other purification types. Due to its setup with multiple columns, individual customization of parameters can be made in the same purification, unachievable by the current plate-based methods.

Systematic Evaluation of Mycobacterium tuberculosis Proteins for Antigenic Properties Identifies Rv1485 and Rv1705c as Potential Protective Subunit Vaccine Candidates.

The lack of efficacious vaccines against Mycobacterium tuberculosis (MTB) infection is a limiting factor in the prevention and control of tuberculosis (TB), the leading cause of death from an infectious agent. Improvement or replacement of the BCG vaccine with one that reliably protects all age groups is urgent. Concerns exist that antigens currently being evaluated are too homogeneous. To identify new protective antigens, we screened 1,781 proteins from a high-throughput proteome-wide protein purification study for antigenic activity. Forty-nine antigens (34 previously unreported) induced antigen-specific gamma interferon (IFN-γ) release from peripheral blood mononuclear cells (PBMCs) derived from 4,452 TB and suspected TB patients and 167 healthy donors. Three (Rv1485, Rv1705c, and Rv1802) of the 20 antigens evaluated in a BALB/c mouse challenge model showed protective efficacy, reducing lung CFU counts by 66.2%, 75.8%, and 60%, respectively. Evaluation of IgG2a/IgG1 ratios and cytokine release indicated that Rv1485 and Rv1705c induce a protective Th1 immune response. Epitope analysis of PE/PPE protein Rv1705c, the strongest candidate, identified a dominant epitope in its extreme N-terminal domain accounting for 90% of its immune response. Systematic preclinical assessment of antigens Rv1485 and Rv1705c is warranted.

Amino acid-based hydrophobic affinity cryogel for protein purification from ora-pro-nobis (Pereskia aculeata Miller) leaves

The surfaces of the polyacrylamide cryogels were coated with L-tryptophan (cryogel-Trp) or L-phenylalanine (cryogel-Phe) to enhance crude leaf extract-derived ora-pro-nobis (OPN) protein binding via pseudo-specific hydrophobic interactions. Cryogels functionalized with amino acids were prepared and characterized through morphological, hydrodynamic, and thermal analyses. The adsorption capacities of cryogel-Phe and cryogel-Trp were evaluated in terms of type (sodium sulfate or sodium phosphate) and concentration (0.02 or 0.10 mol∙L−1) of saline solution, pH (4.0, 5.5, or 7.0), and NaCl concentration (0.0 or 0.5 mol∙L−1). The cryogel-Phe presented a higher adsorptive capacity, achieving its maximum value (q = 92.53 mg∙g−1) when the crude OPN crude leaf extract was diluted in sodium sulfate 0.02 mol∙L−1 + NaCl 0.50 mol∙L−1, at pH = 7.0. The dilution rate significantly (p < 0.05) affected the recovered protein amount after the adsorption and elution processes, reaching 94.45% when the feedstock solution was prepared with a crude extract 5 times. The zeta potential for the eluted OPN proteins was 5.76 mV (pH = 3.23) for both dilution rates. The secondary structure composition mainly included β-sheets (46.50%) and α-helices (13.93%). The cryogel-Phe exhibited interconnected pores ranging 20–300 μm in size, with a Young modulus of 1.51 MPa, and thermal degradation started at 230 °C. These results indicate that the cryogel-Phe exhibited satisfactory properties as promising chromatography support for use in high-throughput purification of crude leaf extract-derived OPN proteins.

Improvements of a high-throughput protein purification process using a calcium-dependent setup

The Human Secretome Project aims to produce and purify all human secreted proteins as full-length. In order to enable this, a robust, gentle and effective purification process is needed, where multiple proteins can be purified in parallel. For this reason, a purification system based on a Protein C-tag and the HPC4 antibody with high affinity to the tag was chosen for purification. The strong binding between the tag and the antibody is specific and calcium-dependent, which allows for mild elution with EDTA. Presented here is a study comparing different protein purification base matrices coupled with the HPC4 antibody, aiming to increase the yield of purified protein and reduce the time for purification. Among the different tested matrices, Capto XP showed a high coupling degree and increased the amount of eluted protein as compared to the control matrix. By moving from batch incubation to direct sample loading and by performing the purification on the ÄKTAxpress, an automated protein purification process and a high reduction of hands-on sample handling was achieved. This new method also integrates the desalting step in the purification process, and the time for purification and analysis of each sample was decreased from five to three days. Moreover, a new mild method for matrix regeneration was developed using 50 mM EDTA pH 7.5 instead of 0.1 M glycine pH 2. This method was proven to be efficient for regeneration while maintaining the column binding performance even after nine rounds of regeneration.

High throughput generation of a resource of the human secretome in mammalian cells

The proteins secreted by human tissues and blood cells, the secretome, are important both for the basic understanding of human biology and for identification of potential targets for future diagnosis and therapy. Here, a high-throughput mammalian cell factory is presented that was established to create a resource of recombinant full-length proteins covering the majority of those annotated as ‘secreted’ in humans. The full-length DNA sequences of each of the predicted secreted proteins were generated by gene synthesis, the constructs were transfected into Chinese hamster ovary (CHO) cells and the recombinant proteins were produced, purified and analyzed. Almost 1,300 proteins were successfully generated and proteins predicted to be secreted into the blood were produced with a success rate of 65%, while the success rates for the other categories of secreted proteins were somewhat lower giving an overall one-pass success rate of ca. 58%. The proteins were used to generate targeted proteomics assays and several of the proteins were shown to be active in a phenotypic assay involving pancreatic β-cell dedifferentiation. Many of the proteins that failed during production in CHO cells could be rescued in human embryonic kidney (HEK 293) cells suggesting that a cell factory of human origin can be an attractive alternative for production in mammalian cells. In conclusion, a high-throughput protein production and purification system has been successfully established to create a unique resource of the human secretome.

Screening Intrinsically Disordered Regions for Short Linear Binding Motifs.

The intrinsically disordered regions of the proteome are enriched in short linear motifs (SLiMs) that serve as binding sites for peptide binding proteins. These interactions are often of low-to-mid micromolar affinities and are challenging to screen for experimentally. However, a range of dedicated methods have been developed recently, which open for screening of SLiM-based interactions on large scale. A variant of phage display, termed proteomic peptide phage display (ProP-PD), has proven particularly useful for the purpose. Here, we describe a complete high-throughput ProP-PD protocol for screening intrinsically disordered regions for SLiMs. The protocol requires some basic bioinformatics skills for the design of the library and for data analysis but can be performed in a standard biochemistry lab. The protocol starts from the construction of a library, followed by the high-throughput expression and purification of bait proteins, the phage selection, and the analysis of the binding-enriched phage pools using next-generation sequencing. As the protocol generates rather large data sets, we also emphasize the importance of data management and storage.

Classification of Cutibacterium acnes at phylotype level by MALDI-MS proteotyping.

Cutibacterium acnes is a major commensal human skin bacteria. It is a producer of propionic acids that maintain skin acidic pH to inhibit the growth of pathogens. On the other hand, it is also associated with diseases such as acne vulgaris and sarcoidosis. C. acnes strains have been classified into six phylotypes using DNA-based approaches. Because several characteristic features of C. acnes vary according to the phylotype, the development of a practical method to identify these phylotypes is needed. For rapid identification of phylotypes for C. acnes strains, a matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) fingerprinting technique has been applied; however, some phylotypes have not been discriminated. We developed a high-throughput protein purification method to detect biomarker proteins by ultrafiltration. MALDI-MS proteotyping using profiling of identified biomarker peaks was applied for the classification of 24 strains of C. acnes, and these were successfully classified into the correct phylotypes. This is a promising method that allows the discrimination of C. acnes phylotypes independent of a DNA-based approach.

Automated buffer preparation using quaternary valve in fast performance liquid chromatography for protein purification from a cell membrane

There is a great need for high-throughput protein purification to produce protein molecules for research and therapeutics. Although there have been significant advancements made in automated multi-step chromatography and preparative in-process design-of-experiment (DOE) capabilities in commercial fast performance liquid chromatography (FPLC) instruments, almost all commercial FPLCs rely on a binary buffer mixing system, which hinders automated buffer preparation. Nevertheless, current-generation FPLCs are equipped with a quaternary mixer designed for limited in-line buffer preparation and preparative pH scouting DOE experiments. We decided to leverage the quaternary mixing capability by extending and re-programming AkTA Avant’s quaternary valve into an automated in-process buffer preparation system to simplify automated purification requiring complex washing steps. We accomplished this by using two extra inlet valves, a sample valve, and versatile valve to split inputs of the quaternary valve into software-selectable stock solutions of pH buffers, salts, eluents, and additives. We also devised a new flow scheme to perform automated two-step chromatography using only one versatile valve. This was accomplished by using only stock parts and software to facilitate reproduction. To demonstrate the versatility and capability of the system, we purified a transmembrane protein that requires a detergent to stay soluble and needs an in-column, high-salt washing step to achieve high purity.

High-Throughput Protein Analysis Using Negative Stain Electron Microscopy and 2D Classification.

High-throughput protein expression and purification allows for fast triaging of several constructs based on expression levels, protein integrity, and solubility. While this technology has been successfully adopted to prioritize constructs for structural biology, it could not inform on important biochemical properties such as domain architecture, homogeneity, and flexibility. Negative staining electron microscopy can be used to quickly evaluate these properties and, if coupled to single particle analysis, can inform on the architecture and conformational state of nearly any protein sample. Here we describe a protocol for negative stain sample preparation, imaging, and two-dimensional (2D) data analysis applicable to a variety of protein complexes. We discuss in more detail a specific application of this technology to large molecule studies to determine the binding sites of individual antibodies on target antigens.

A multi-column plate adapter provides an economical and versatile high-throughput protein purification system

Protein purification is essential in the study of protein structure and function, and the development of novel therapeutics. Many studies require purifying multiple proteins at once, increasing the demand for improved purification methods. We hypothesized that multiple chromatography columns could be interfaced with a multi-well collection plate for rapid and convenient protein purification without the need of expensive instrumentation. As such, we developed a multi-column plate adapter (MCPA), which provides an economical yet versatile and time efficient, high-throughput protein purification system. The MCPA system simultaneously purified milligrams of different proteins under gravity or under vacuum for faster purification. The MCPA handles up to twenty-four 12 mL columns and multiple MCPA's in sequence allow milligram-scale purification of 96 different samples with relative ease. We also used the MCPA system for large scale affinity purification of four proteins, providing sufficient yields and purity for protein crystallization and biophysical characterization. The MCPA system is ideal for optimizing resin type and volume or any other purification parameter by customizing individual columns during the same purification. The high-throughput and versatile nature of this system should prove to be useful in obtaining adequate amounts of protein for subsequent analyses in any laboratory setting.

Novel method to rapidly and efficiently lyse Escherichia coli for the isolation of recombinant protein

Rapid and high-throughput protein purification methods are required to explore structure and function of several uncharacterized proteins. Isolation of recombinant protein expressed in Escherichia coli strain BL21 (DE3) depends largely on the efficient and speedy bacterial cell lysis, which is considered as the bottleneck during protein purification. Cells are usually lysed by either sonication or high pressure homogenization, both of which are slow, require special equipment, lead to heat generation, and may result in loss of protein's biological activity. We report here a novel method to lyse E. coli, which is rapid, and results in high yield of isolated protein. Here, we have carried out intracellular expression of lysozyme domain (LD) of mycobacteriophage D29 endolysin. LD remains non-toxic until chloroform is added into the culture medium that permeabilizes bacterial cell membrane and allows the diffusion of LD to the peptidoglycan layer causing latter's degradation ensuing cell lysis. Our method efficiently lyses E. coli in short duration. As a proof-of-concept, we demonstrate large scale isolation and purification of α subunit of E. coli RNA polymerase and GFP, when they are co-expressed with LD. We believe that our method will be adopted easily in high-throughput as well as large scale protein isolation experiments.

High-throughput purification of recombinant proteins using self-cleaving intein tags

High throughput methods for recombinant protein production using E. coli typically involve the use of affinity tags for simple purification of the protein of interest. One drawback of these techniques is the occasional need for tag removal before study, which can be hard to predict. In this work, we demonstrate two high throughput purification methods for untagged protein targets based on simple and cost-effective self-cleaving intein tags. Two model proteins, E. coli beta-galactosidase (βGal) and superfolder green fluorescent protein (sfGFP), were purified using self-cleaving versions of the conventional chitin-binding domain (CBD) affinity tag and the nonchromatographic elastin-like-polypeptide (ELP) precipitation tag in a 96-well filter plate format. Initial tests with shake flask cultures confirmed that the intein purification scheme could be scaled down, with >90% pure product generated in a single step using both methods. The scheme was then validated in a high throughput expression platform using 24-well plate cultures followed by purification in 96-well plates. For both tags and with both target proteins, the purified product was consistently obtained in a single-step, with low well-to-well and plate-to-plate variability. This simple method thus allows the reproducible production of highly pure untagged recombinant proteins in a convenient microtiter plate format.

High-throughput Hisx6-tagged protein purification

High-throughput Hisx6-tagged protein purification

In situ cross-linked and highly carboxylated poly(vinyl alcohol) nanofibrous membranes for efficient adsorption of proteins.

Creating adsorptive materials for the fast, efficient, and high-throughput adsorption and purification of proteins is critical to meet the great demands for highly purified proteins, yet it has proven to be a highly challenging task. Here, we report that cross-linked and highly carboxylated poly(vinyl alcohol) (PVA) nanofibrous membranes were fabricated by a combination of electrospinning and the in situ graft polymerization of PVA and maleic anhydride (MAH) under mild conditions. Taking advantage of the large surface area available for protein binding, the highly tortuous porous structure, and the robust mechanical properties, the resultant PVA/MAH nanofibrous membranes exhibited a good integrated adsorption performance towards lysozyme, including a superior adsorption capacity of 177 mg g-1, fast adsorption equilibrium within 4 h, good selectivity, and good reversibility. Moreover, the saturation dynamic adsorption amount towards lysozyme reached 159 mg g-1 under 750 Pa driven solely by gravity, which conformed to the specified requirements for high adsorption capacity under relatively low pressure drops. Furthermore, the adsorption performance towards a protein mixture was analyzed by sodium dodecyl sulphate-polyacrylamide gel electrophoresis and the resultant PVA/MAH nanofibrous membranes retained excellent stability under depyrogenation conditions. The successful fabrication of such fascinating nanofibrous materials by using this simple and intriguing approach may provide new insights into the design and development of adsorptive materials for the purification of proteins with superior adsorption performance.

Robotic high-throughput purification of affinity-tagged recombinant proteins.

Affinity purification of recombinant proteins has become the method of choice to obtain good quantities and qualities of proteins for a variety of downstream biochemical applications. While manual or FPLC-assisted purification techniques are generally time-consuming and labor-intensive, the advent of high-throughput technologies and liquid handling robotics has simplified and accelerated this process significantly. Additionally, without the human factor as a potential source of error, automated purification protocols allow for the generation of large numbers of proteins simultaneously and under directly comparable conditions. The delivered material is ideal for activity comparisons of different variants of the same protein. Here, we present our strategy for the simultaneous purification of up to 24 affinity-tagged proteins for activity measurements in biochemical assays. The protocol described is suitable for the scale typically required in individual research laboratories.