High-temperature Resistance Properties Research Articles

Performance of asphalt mixtures containing high reclaimed asphalt pavement and waste steel rolling oil

Reducing costs, dealing with environmental problems, and preserving more natural resources are among the main incentives for reusing asphalt instead of road reconstruction. However, asphalt reuse involves the addition of some modifiers to the asphalt mixture. In this respect, rejuvenators investigated in the previous studies did not perform properly against all failures. Besides, they had problems such as lacking access to the required amount for road construction and high production costs. Regarding the high-temperature resistance and antioxidant properties of the waste steel rolling oil (WSRO), for the first time, the effect of using this lubricant was investigated on the recovery of bitumen aging and the performance of asphalt mixture containing high amounts of reclaimed asphalt pavement (RAP). To this end, the conventional (penetration and softening point) tests and rotational viscosity test were conducted to determine the optimal amount of rejuvenator. In addition, FTIR and FESEM tests were carried out for chemical and morphological investigation. SCB and dynamic creep tests were performed on a balanced mix design to examine the performance against cracking and rutting. Moisture sensitivity was also investigated by performing an indirect tensile test. The results show that a uniform texture was created in the aged bitumen modified with WSRO, and there was a decrease in functional groups that represent the occurrence of aging. Therefore, WSRO can restore aging and improve rutting and cracking performance. Resistance to moisture sensitivity also improved. Overall, the results show a performance improvement in the mixture containing high RAP content mixed with WSRO as a waste rejuvenator. However, more studies encompassing rheological, economic and environmental aspects, are needed to conclude about the practical use of this material.

Photocurable comb polyamic acid for solvent-free direct ink writing with low dimensional shrinkage

Polyimides are high-performance organic polymers with excellent insulation, high-temperature resistance, and mechanical properties. However, their poor solubility makes it challenging to use them to prepare solvent-free high-performance photocurable polyimide inks with low dimensional shrinkage. In this study, photocurable comb polyamic acid resins were synthesized, and their solubility was examined based on density functional theory (DFT) calculations. Experiments showed that polyamic acid resins with specific topologies could be dissolved in photocurable monomers to prepare solvent-free photocured polyimide inks. A custom-made UV-assisted direct ink writing 3D printer was used to fabricate complex three-dimensional devices. Further heat treatment caused the polyamic acids to undergo dehydration and cyclization into rigid polyimide structures, and this process exhibited less than 6% dimensional shrinkage. The final material had a maximum storage modulus of 3.1 GPa (40 ℃) and a glass transition temperature of 204 ℃. The good comprehensive performance suggests great potential for aerospace applications.

Preparation and High-Temperature Resistance Properties of Phenolic Resin/Phosphate Hybrid Coatings.

In this study, a novel fabrication method was used to synthesize phenolic resin/phosphate hybrid coatings using aluminum dihydrogen phosphate (Al(H2PO4)3, hereafter denoted as Al), SC101 silica sol (Si) as the primary film-forming agent, and phenolic resin (PF) as the organic matrix. This approach culminated in the formation of Al+Si+PF organo-inorganic hybrid coatings. Fourier-transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) results confirmed the successful integration of hybrid structures within these coatings. The crystalline structure of the coatings post-cured at various temperatures was elucidated using X-ray diffraction (XRD). Additionally, the surface and cross-sectional morphologies were meticulously analyzed using scanning electron microscopy (SEM), offering insights into the microstructural properties of the coatings. The coatings' porosities under diverse thermal and temporal regimes were quantitatively evaluated using advanced image processing techniques, revealing a significant reduction in porosity to a minimum of 5.88% following a thermal oxidation process at 600 °C for 10 h. The antioxidant efficacy of the phosphate coatings was rigorously assessed through cyclic oxidation tests, which revealed their outstanding performance. Specifically, at 300 °C across 300 h of cyclic oxidation, the weight losses recorded for phosphate varnish and the phenolic resin-infused phosphate coatings were 0.15 mg·cm-2 and 0.09 mg·cm-2, respectively. Furthermore, at 600 °C and over an identical period, the weight reduction was noted as 0.21 mg·cm-2 for phosphate varnish and 0.085 mg·cm-2 for the hybrid coatings, thereby substantiating the superior antioxidation capabilities of the phenolic resin hybrid coatings in comparison to the pure phosphate varnish.

Fast Solution Blow Spinning of Lotus-Leaf-Inspired SiO2 Nanofiber Sponge for High Efficiency Purification.

Massive production of SiO2 nanofibers with both high durability and exceptional performance remains a significant challenge. Herein, a novel approach was introduced to achieve the massive production of SiO2 nanofibers with lotus-leaf-inspired surfaces by combining solution blowing spinning (SBS) and the polymer-derived ceramics method. Based on the SBS technique, three types of precursor nanofiber products were fast spined with methyl silsesquioxane polymer and polymethyl hydrogen siloxane employed as Si sources. The flow rate of the SBS spined Si-based ceramic nanofibers was enhanced to 20 mL·h-1. Furthermore, through the integration of hydrophobic-oleophilic SiO2 nanoparticles into the precursor solution, SiO2 nanofibers with lotus-leaf nanoprotrusion surfaces were fabricated. Nanoparticle-decorated SiO2 fibers demonstrated excellent hydrophobicity (138.3°), compression resilience (∼60%), proficiency in organic pollutant adsorption, high-temperature resistance (∼1100 °C), and outstanding thermal insulation properties (thermal conductivity of 0.0165 W·(m·K)-1).

Machining performance of micro-pit and micro-groove composite textured tools in tungsten alloy turning

Tungsten alloys are widely used in aerospace because of their high-temperature resistance, corrosion resistance, high strength, and other excellent comprehensive properties. But tungsten alloys are typical hard-to-machining materials. Surface micro-textures can improve friction properties, such as preparing micro-textures on the surface of cutting tools for tungsten alloys, which is expected to enhance the cutting performance of tungsten alloys. Still, the relevant cutting laws need to be further studied. A combination texture of micro-pit and micro-groove was designed, and the micro-textured tool surface was prepared by laser machining. Compared with non-textured tools, micro-pit and micro-groove composite textured tools can effectively improve the processing quality of tungsten alloys. It happened because textures on the tool’s surfaces enhance machining performance by reducing the actual contact area between the tool and the chip and storing lubrication medium. At the same time, comparative experiments of micro-textured tools and non-textured tools were carried out. The results showed that when cutting W93NiFe alloys with textured and non-textured tools, the maximum reduction in resultant cutting forces with textured tools was 9%. The maximum reduction in surface roughness was 39.3%, the surface burr height of the tungsten alloy workpiece was lower, the number of surface grooves was lesser, and the surface was more flat. The research results are significant in achieving the efficient processing and high-quality manufacturing of tungsten alloys.

Low-temperature synthesis and properties of high-purity boron nitride microspheres

Boron nitride (BN) has excellent high temperature resistance, thermal conductivity, strong insulation, and wave-transparent properties. Spherical BN is an essential filler in polymer matrix composites due to good particle mobility and high filler content. In this paper, we present a large-scale preparation for BN microspheres with uniform particle size distribution in the range of 1.0–2.8 μm via solvothermal method at low cost and high yield (∼90%), which is two orders of magnitude lower than the diameter of the spherical BN prepared by other methods. BN microspheres can achieve good crystallinity (>70%) and high purity (>99.9%) at 800 °C. The temperature resistance study showed that the BN microspheres could maintain the dense particle morphology at 1200 °C. In addition, the prepared BN microspheres have good dielectric and thermal conductivity properties (dielectric constant ∼3.4, dielectric loss ∼2.0 × 10−3, and thermal conductivity of 9.8 W m−1 K−1), which show great potential in the field of wave-transparent and thermal conductive composites. The synthesis process of BN microspheres proposed in this study provides a new idea for the preparation of ceramic micro or nano materials by polymer-derived ceramics.

Multifunctional PVA/gelatin DN hydrogels with strong mechanical properties enhanced by Hofmeister effect

Due to the low mechanical strength, poor tensile property, and inability to work under extreme conditions, hydrogels encounter obstacles in their practical applications. It was found that the Hofmeister effect could strengthen and toughen the single hydrogel networks. Herein, poly (vinyl alcohol) (PVA)/gelatin dual-network (DN) hydrogels with strong mechanical properties were prepared and improved by Hofmeister effect using Na2SO4 as the salting-out solution. The hydrophilic anion SO42- induced a salting-out effect, which made the interplay in PVA and gelatin stronger, and the network structure more compact and stable. Moreover, the dual-assisted effect of freeze-thaw and freezing salting-out further enhanced the mechanical properties. The as-obtained DN hydrogel had excellent overall mechanical properties with a fracture tensile strain, a tensile strength and a toughness of 1281 %, 1.12 MPa and 7.19 MJ/m3, respectively. In addition, it had the ability to withstand weights more than 5000 times its own mass. The hysteresis energy, Young's modulus, and toughness recovery of the hydrogel reached 91.21 %, 97.36 %, and 97.47 % of the original values when the interval time was 180 min. Furthermore, after treatment with ethylene glycol /H2O solution, the hydrogel was given high temperature resistance, anti-freezing and moisturizing properties, while maintaining its good mechanical properties in a wide temperature range. The weight remained at 84.7 % and 71.45 % of the original weight after one week at 25 °C and 12 h at 60 °C, respectively. This kind of multifunctional DN hydrogel with high mechanical properties will find wider application in the field of flexible electronic devices.

Experimental Study on the Characterization of Aging Resistance Properties of Optical Cables in the Hydrogen-Containing Downhole Environment.

The utilization of downhole optical cables has significantly enhanced the efficiency and reliability of oilfield production operations; however, the challenging high-temperature and high-pressure conditions prevalent in oil-gas fields markedly reduce the service lifespan of these optical cables. This limitation severely impedes their application and further development in subterranean environments. In this study, a qualitative analysis was conducted on the structural materials utilized in two types of optical cables to identify these materials and assess the high-temperature tolerance and aging resistance properties of the optical fibers incorporated within. It was discovered that hydrogen infiltration into the subterranean optical cables predominantly accounts for their operational failure. To address this issue, an optical loss testing platform was established, facilitating the execution of a high-temperature and high-pressure hydrogen permeation aging experiment on the optical fibers, allowing for the evaluation of the hydrogen resistance capabilities of the two types of optical fibers. The findings from this study provide a theoretical foundation and methodological guidance for the optimization of optical fibers, aiming to enhance their durability and functional performance in adverse environmental conditions encountered in oil-gas field applications.

Microwave absorbing performance of reduced graphene oxide @ alumina fabricated by atomic layer deposition method

In this work, a series of alumina coating reduced graphene oxide (RGO@Al2O3) composites with core-shell structure was synthesized by the atomic layer deposition (ALD) method. The alumina (Al2O3) thickness of the RGO@Al2O3 could be controlled by changing the number of ALD cycles. The microstructure, high-temperature resistance, and microwave absorbing properties of the composites were investigated in detail. The composite could provide excellent high-temperature resistance and microwave absorbing properties. The composite started decomposition at 620 °C. The maximum reflection loss value of the composite obtained by applying 200 Al2O3 deposition cycles is −14.2 dB at 15.7 GHz, and its effective absorption bandwidth reaches 5.0 GHz (13.0–18.0 GHz). The results show that the RGO@Al2O3 composite has the potential application in high-temperature microwave absorbing fields, due to excellent high-temperature resistance, reflection loss, and effective absorption bandwidth.

Heat transfer mechanism and performance optimization scheme of refractory oxide solid heat storage materials

Clean energy advances can drive solid heat storage technology. Because of their high-temperature, corrosion, and excellent thermal shock resistance properties, refractory oxides are widely used as solid heat storage materials. However, their applications are limited owing to their poor heat-transfer performance resulting from their multicomponent, multiphase, and complex nature and thus understanding their heat-transfer mechanism will be crucial for their performance optimization. In this study, the thermal properties and mechanisms of corundum, high-alumina, and magnesia bricks were characterized using heat-transfer theories and models. Macroscopic analysis of the bricks revealed that they are all “internal porosity” materials. By comparing the weighting parameter j, the multiphase high-alumina brick shows poor heat-transfer path patency and the measured thermal conductivity is the lowest at 3.55 W m−1 K−1. Microscopic analysis found that in contrast to the thermal conductivity of other materials, the thermal conductivity of high-alumina bricks was significantly affected by phonon intrinsic scattering. Moreover, corundum and magnesia bricks exhibited a wider range of ultimate heat-transfer performance than the high-alumina brick. Hence, the heat-transfer performance of refractory oxide can be enhanced by increasing their particle contact, reducing the negative effects of microcracks, phases, and impurities, and by reducing the number of defects on phonon heat transfer, thereby providing an optimization scheme for improving the heat-transfer performance of the materials.

Low viscosity and low temperature curing reactive POSS/epoxy hybrid resin with enhanced toughness and comprehensive thermal performance.

The mechanical and high-temperature resistance properties of epoxy resins cured at low temperatures (Tcuring ≤ 100 °C) are often inferior, and the most toughening modification methods for epoxy resins tend to compromise thermal resistance, which significantly limit the practical applications of it. Therefore, this work reported a low viscosity and low-temperature curing epoxy hybrid resin system (OPEP), adopting E-51 as a resin matrix, liquid anhydride (MHHPA) as a curing agent, tertiary amine (DMBA) as a curing accelerator, and reactive octa-epoxy terminated polyhedral oligomeric silsesquioxane (OG-POSS) as a toughening modifier. Results demonstrated that the OPEP system has excellent processability with low viscosity and long processing window period and satisfies the practical requirements of low-temperature curing. The OG-POSS exhibits superior compatibility and reactivity with the resin matrix, and its addition slightly reduces the Eα of the curing reaction and has a certain promotive effect on the curing of epoxy resin. In addition, the curing reaction rate of the OPEP resin complies with the Šesták-Berggren autocatalytic kinetics model. The impact strength, flexural strength, tensile strength, and elongation at break of the OPEP resin reached a maximum of 15.55 kJ m-2, 121.65 MPa, 90.36 MPa, and 2.48%, representing increases of 55.97%, 3.1%, 64.68%, and 26.51% compared to those of the pure resin, respectively. Notably, due to the heat-resistant inorganic silicon cage structure of OG-POSS, the thermal decomposition temperature (Td5), glass transition temperature (Tg), and heat distortion temperature (THDT) of the OPEP0.02 resin were 313.2 °C, 123.7 °C, and 102.0 °C, showing increases of 13.0 °C, 2.3 °C, and 6.8 °C compared to the pure resin, respectively, which is difficult to achieve for the general thermosetting resin toughening modification method. This research utilized organic-inorganic nanohybrid materials (POSS) to optimize the toughness and thermal stability of the resin in a coordinated manner, providing guidance for the preparation of high-performance epoxy resins that cure at low temperatures.

Development of Moisture Absorbent Ceramic-Coated Separators for Advanced Lithium-Ion Batteries

In the present human life, various electric devices and machines are worked by lithium-ion batteries (LIBs). The batteries have still remained challenges such as, the low cycling stability due to side reactions during charge-discharge cycling and the weak thermal stability at high temperatures. Accordingly, research on improving resistance to high temperatures and impregnability by coating ceramic particles and polymer binders on the surface of the separator is being conducted. The ceramic coating separator is manufactured by connecting small-sized inorganic particles to each other using a small amount of binder. The inorganic particles have high hydrophilicity and high specific surface area, so the ceramic separator has excellent wettability to the electrolyte. As a ceramic coating, alumina is currently commercialized, and a slurry is prepared by mixing a binder, etc., and then coated on a separator and then dried. LG Energy Solutions has commercialized a ceramic composite separator called SRS (Safety-reinforcing separator) and is applying it to batteries. By introducing a ceramic layer on the surface of a polyolefin-based separator, the heat resistance and mechanical strength of the separator have been greatly improved, and it has been widely used in high-capacity and large-sized batteries. when the temperature of the LIBs rises and the separator shrinks or ruptures, a large amount of lithium ions may move, making control difficult and creating a risk of explosion. Therefore, shutdown occurs, but a separator with good shape retention at high temperature is required. Accordingly, research on improving resistance to high temperatures by coating ceramic particles and a polymer binder on the surface of the separator is being conducted. In this work, Ceramic-coated separator membrane film was fabricated using aluminum fluoride (AlF3) materials for a powerful moisture (H2O) scavenger. Accordingly, research on improving high temperature resistance and impregnation property by coating ceramic particles and a polymer binder on the surface of the separator is in progress. First of all, a-AlF₃ nanorods with an average length of 1.882 μm and a diameter of 320 nm were synthesized under low supersaturation conditions. Then, PVdF-HFP [Poly(vinylidene fluoride-co-hexafluoropropylene)]-acetone solution was mixed and coated on a polypropylene membrane. The AlF₃-coated separator exhibited thermal shrinkage of 4%, 8%, and 18% at 130, 140, and 150°C, respectively, confirming that thermal stability was improved. In addition, as a result of the impregnation test, it was confirmed that the impregnation property of the coated separator was improved compared to the existing polypropylene separator. In addition, it was confirmed that the full cell manufactured using the a-AlF₃-coated membrane film has improved cycle stability and high-speed, high-capacity compared to the full cell manufactured using the existing non-coated separator.

Enhancing rheological and aging performance of matrix asphalt through thermoplastic phenol-formaldehyde resin-based intercalated clay nanocomposites: Mechanisms and effects

This research presents a comprehensive investigation into the development of advanced asphalt materials fortified with PF/OMMT nanocomposites, emphasizing the synergistic effects of melt blending and nano intercalation. Through meticulous characterization, including SEM, FT-IR, and XRD analyses, the study unveils the microstructural evolution, affirming the formation of highly oriented interlayer structures within the asphalt matrix. The incorporation of OMMT, known for its hydrophobicity, significantly enhances the interfacial interactions between PF and asphalt, thereby bolstering the material's mechanical resilience, specifically its tensile, shear, and high-temperature rutting resistance properties. The presence of PF imparts notable improvements in the asphalt's thermal stability and aging resistance, attributed to its inherent antioxidative properties and the establishment of a robust three-dimensional polymer network with OMMT. These advancements herald a promising avenue for the production of high-performance, durable asphalt with superior anti-aging characteristics, optimized for demanding environmental conditions and heavy-duty applications.

Structure design and tribological properties of Cu–SiC foam ceramic composites

Tribological properties at high temperature are an important research aspect for high speed or heavy load situation. This paper is to study the structure effects on the tribological properties of Cu–SiC foam ceramic (SiCf) composites at high temperature. Cu-SiCf composites form two interconnected three-dimensional (3D) network structure, which tribological properties could be controlled by designing SiCf ceramic volume fractions, friction components and mesh size. The results showed that SiCf ceramic has overall enhancement mechanism to Cu alloy and friction components by 3D-structure. Additionally, Cu-SiCf composites have friction properties of high temperature resistance, low wear rate, and stable coefficient of friction (COF).

Microstructure, high-temperature corrosion resistance and oxidation properties of (TiVZrCrAl)N high entropy nitride coatings with different N2/Ar ratios

The (TiVZrCrAl)N high-entropy nitride coatings were prepared on Zr-4 alloy substrates by reactive magnetron sputtering with different N2/Ar pressure ratios I values. The microstructure, nanohardness, high-temperature corrosion and steam oxidation resistance properties of the coatings were investigated. The results showed that the thickness of the coating first decreaseds and then increaseds with decreasing N2/Ar pressure ratio, but the hardness first increaseds and then decreaseds. All the coatings exhibited B1-NaCl structure. When I = 1/12, the (TiVZrCrAl)N coating had excellent high-temperature corrosion resistance and steam oxidation performance. The high-temperature steam oxidation mechanisms of the (TiVZrCrAl)N coatings were analyzed in detail.

Research and Application Progress of High-Entropy Alloys

With the continuous improvement of global technological levels and the increasing demand for high-performance alloy materials in national economic construction, the traditional single principal component alloy is increasingly unable to meet people’s increasing service needs. High-entropy alloys play an important role in aerospace, mechanical manufacturing, biomedicine, energy development and other engineering fields because of their unique physical, chemical and mechanical properties. Based on the concept of high-entropy alloys, the high-entropy effect, lattice distortion effect, sluggish diffusion effect and cocktail effect of high-entropy alloys are represented in this paper. The common preparation methods of high-entropy alloys are summarized according to the classification of melting-casting method, mechanical alloying method and coating method. The strength and toughness, wear resistance, corrosion resistance, high temperature resistance, fatigue resistance, radiation resistance and magnetic properties of the high-entropy alloys are discussed. The application prospect of high-entropy alloys is summarized, and the future research and development direction of high-entropy alloys are prospected on this basis.

Effect of Gd doping on phase evolution, mechanical and thermal characteristics of 1La-xGd-2Yb-3.5YSZ solid solutions

Thermal barrier coatings (TBCs) are critical for the reliability and lifespan of aircraft engine turbine blades. In this study, a novel quaternary rare-earth oxide (La2O3, Gd2O3, Yb2O3, and Y2O3) co-doped ZrO2 solid solution, referred to as 1La-xGd-2Yb-3.5YSZ, was synthesized by varying the doping amount of Gd2O3 from 0 to 6 mol. %. The impact of co-doping-induced lattice distortion on the phase composition, high-temperature phase stability, sintering resistance, and mechanical and thermal properties of the solid solution has been explored. It is found that the addition of Gd2O3 stabilizer effectively increased the lattice distortion of the solid solution, which led to improved phase stability and sintering resistance, enhanced mechanical properties, and low thermal conductivity. Our findings highlight the promising properties of the 1La-xGd-2Yb-3.5YSZ solid solution, making it an attractive candidate for TBC materials.

Mechanical and high-temperature wear resistance properties of WC-reinforced AlCoCrFeNiTi0.5 high entropy alloy matrix composite

x wt.% WC/AlCoCrFeNiTi0.5 (x = 0, 5, 8, 10, 15) high entropy matrix composites (HEAC) with different mass fractions of WC particles were prepared by mechanical alloying (MA) and spark plasma sintering (SPS). Their microstructure, mechanical properties, room-temperature (RT) and high-temperature (HT) wear resistance properties were investigated. It shows the sintered HEACs are mainly composed of a face-centered cubic (FCC) solid solution matrix, (Fe, Co)6W6C, and other carbides. The increase of WC particles leads to the fracture strength and wear resistance of AlCoCrFeNiTi0.5 being increased first and then decreased. The 8 wt% WC/AlCoCrFeNiTi0.5 HEAC shows higher strength and better wear resistance properties due to the formation of carbides and protection of the dense oxide film on the worn surface. The high-temperature wear mechanism is mainly adhesive wear, and oxidative wear in the case with lower WC content, but it becomes adhesive wear, abrasive wear, and oxidative wear in the case with higher WC content. This work provides light for investigating tribological properties of high-entropy matrix composites for surface engineering.

Enhanced Thermal and Dielectric Properties of Polyarylene Ether Nitrile Nanocomposites Incorporated with BN/TiO2-Based Hybrids for Flexible Dielectrics.

Outstanding high-temperature resistance, thermal stability, and dielectric properties are fundamental for dielectric materials used in harsh environments. Herein, TiO2 nanoparticles are decorated on the surface of BN nanosheets by internal crosslinking between polydopamine (PDA) and polyethyleneimine (PEI), forming three-dimensional novel nanohybrids with a rough surface. Then, an ether nitrile (PEN) matrix is introduced into the polyarylene to form polymer-based nanocomposite dielectric films. Meanwhile, the structure and micromorphology of the newly prepared nanohybrids, as well as the dielectric and thermal properties of PEN nanocomposites, are investigated in detail. The results indicate that TiO2 nanoparticles tightly attach to the surface of BN, creating a new nanohybrid that significantly enhances the comprehensive performance of PEN nanocomposites. Specifically, compared to pure PEN, the nanocomposite film with a nanofiller content of 40 wt% exhibited an 8 °C improvement in the glass transition temperature (Tg) and a 162% enhancement in the dielectric constant at 1 kHz. Moreover, the dielectric constant-temperature coefficient of the nanocomposite films remained below 5.1 × 10-4 °C-1 within the temperature range of 25-160 °C, demonstrating excellent thermal resistance. This work offers a method for preparing highly thermal-resistant dielectric nanocomposites suitable for application in elevated temperature environments.

High thermal insulation and high strength SiBCN@SiC double network ceramic composite aerogel

Silicon carbide (SiC) fiber materials prepared by precursor conversion method have attracted extensive attention in recent years due to their excellent high temperature resistance and thermal insulation properties. Herein, a novel SiBCN/SiC dual network ceramic composite aerogel with the three-dimensional (3D) porous SiC fiber network obtained by direct electrospinning as the first network and SiBCN aerogel as the second network was prepared by combining electrospinning with sol-gel technology and supercritical drying technology. The microstructure, phase composition, pore size distribution, compressive resistance, thermal insulation and related mechanisms of the 3D SiC fiber network and composite aerogel at different heat treatment temperatures were investigated in detail. The results show that the constructed double-network structure can make up for the heat transfer problem of a single SiC fiber network and further reduce its thermal conductivity, so that the prepared composite aerogel exhibits a lower thermal conductivity (∼0.0316 W m−1 K−1). In addition, the unique double network structure endows the composite aerogel with excellent compressive properties (2.56–2.89 MPa).