High-speed Optical Fiber Communication Research Articles

16QAM optical signal generation scheme based on weighted optimal Euclidean distance.

A two-dimensional signal constellation scheme for binary uniform memoryless source transmission in optical fiber channels is studied in this paper. In geometric shaping (GS), optimization algorithms are usually used to change the overall position of constellation points while maintaining the probability of constellation points unchanged. Different optimization functions are used to allocate the position of constellation symbols, thereby improving constellation performance. A 16 quadrature amplitude modulation (QAM) optical signal generation scheme based on weighted optimal Euclidean distance is proposed in this paper. In order to obtain the best constellation diagram and increase the shaping gain, the weighted optimal Euclidean distance that can minimize the bit error rate (BER) over multiple iterative optimizations is used as the objective function. On the one hand, the proposed 16QAM optical signal generation scheme based on weighted optimal Euclidean distance always outperforms the uniform square 16QAM and the uniform circle 16QAM schemes in the back to back (BTB) transmission. On the other hand, after analyzing the simulation demonstration in a 50GBaud coherent optical communication system over 3000km, results demonstrate that the optical signal to noise ratio (OSNR) performance of this system is better than that of the uniform square 16QAM and the uniform circle 16QAM, which is improved by 0.52dB and 0.85dB, respectively. In addition, the proposed 16QAM system increases the transmission distance by 989km and 741km, respectively, compared to the other two systems. The performance confirms that the proposed novel 16QAM scheme, to the best of our knowledge, can effectively improve the reliability and transmission distance. Therefore, the proposed scheme has a certain development prospect in the future long-distance transmission of high-speed optical fiber communication.

Numerical design of a dual-wavelength confocal metalens with photonic crystal filter based on filter-substrate-metasurface structure

In this paper, a novel type of dual-wavelength confocal metalens is proposed from the perspective of structural design, in order to solve the spatial crosstalk between two wavelengths. With the function of filter-substrate-metasurface (FSM) structure based on photonic crystal filtering, we designed a miniaturized dual-wavelength confocal metalens with a radius of 36 μm and a focal length of 91 μm. The results of our work show that it can greatly reduce the spatial crosstalk between any two wavelengths, and complete confocal with high precision without reducing the focusing efficiency, so that the focus difference between the two wavelengths of light is less than 1 μm. Besides, through simulation we also found that the lens can focus light in the bandwidths around these two wavelengths (1.33–1.38 μm and 1.50–1.55 μm), but also maintain a good focusing efficiency. Therefore, the proposed metalens can be used to realize imaging, microscopy, high-speed and efficient optical fiber communication and many related fields.

Silicon-Organic Hybrid Electro-Optic Modulator and Microwave Photonics Signal Processing Applications.

Electro-optic modulator (EOM) is one of the key devices of high-speed optical fiber communication systems and ultra-wideband microwave photonic systems. Silicon-organic hybrid (SOH) integration platform combines the advantages of silicon photonics and organic materials, providing a high electro-optic effect and compact structure for photonic integrated devices. In this paper, we present an SOH-integrated EOM with comprehensive investigation of EOM structure design, silicon waveguide fabrication with Slot structure, on-chip poling of organic electro-optic material, and characterization of EO modulation response. The SOH-integrated EOM is measured with 3 dB bandwidth of over 50 GHz and half-wave voltage length product of 0.26 V·cm. Furthermore, we demonstrate a microwave photonics phase shifter by using the fabricated SOH-integrated dual parallel Mach-Zehnder modulator. The phase shift range of 410° is completed from 8 GHz to 26 GHz with a power consumption of less than 38 mW.

Two fiber-bundle-type FI/FO devices of low insertion loss and cross talk applied for connecting 13-core 5-mode fiber.

Two fiber-bundle-typed fan-in/fan-out (FI/FO) devices, "wavy hexagon-shaped silhouette" type (W-FI/FO) and "tortoise-shaped silhouette" type (T-FI/FO), have been proposed and manufactured based on tapering glass tubes for docking with a self-made 13-core 5-mode fiber. The W-FI/FO device consists of 19 5-mode fibers and has an extended layout based on the 13-core 5-mode fiber structure. It could dock multiple fibers with 19 or 13 cores of the same size standards. When connecting it with 13-core 5-mode, the average losses (ILs) of its five modes are 1.07 dB, 2.95 dB, 3.42 dB, 3.65 dB, and 4.38 dB. The cross talks of the five linearly polarized (LP) modes are -69.1 dB, -64.7 dB, -44.2 dB, -43.9 dB, and -39.1 dB. The T-FI/FO device has a similar core arrangement to the 13-core 5-mode fiber and its average ILs of the five LP modes are 0.23 dB, 1.31 dB, 2.09 dB, 2.66 dB, and 3.03 dB. The cross talks of its five LP modes between adjacent cores are -72.8 dB, -67.8 dB, -43.6 dB, -40.0 dB, and -35.3 dB. The IL and cross talk of the LP01 mode are of satisfactory values, which are 0.23 dB and -72.8 dB, respectively. These two proposed FI/FO devices are expected to be used for high-speed optical interconnection and fiber communication.

400 Gbit/s 4 mode transmission for IM/DD OAM mode division multiplexing optical fiber communication with a few-shot learning-based AffinityNet nonlinear equalizer.

Nonlinear impairment in a high-speed orbital angular momentum (OAM) mode-division multiplexing (MDM) optical fiber communication system presents high complexity and strong stochasticity due to the massive optoelectronic devices. In this paper, we propose an Affinity Network (AffinityNet) nonlinear equalizer for an OAM-MDM intensity-modulation direct-detection (IM/DD) transmission with four OAM modes. The labeled training and testing signals from the OAM-MDM system can be regarded as "small sample" and "large target", respectively. AffinityNet can be used to build an accurate nonlinear model using "small sample" based on few-shot learning and can predict the stochastic characteristic nonlinearity of OAM-MDM with a high level of generalization. As a result, the AffinityNet nonlinear equalizer can effectively compensate the stochastic nonlinearity in the OAM-MDM system, despite the large difference between the training and testing signals due to the stochastic nonlinear impairment. An experiment was conducted on a 400 Gbit/s transmission with four OAM modes using a pulse amplitude modulation-8 (PAM-8) signal over a 2 km ring-core fiber (RCF). Our experimental results show that the proposed nonlinear equalizer outperformed the conventional Volterra equalizer with improvements in receiver sensitivity of 1.7, 1.8, 3, and 3.3 dB for the four OAM modes at the 15% forward error correction (FEC) threshold, respectively. In addition, the proposed equalizer outperformed a convolutional neural network (CNN) equalizer with improvements in receiver sensitivity of 0.8, 0.5, 0.9, and 1.4 dB for the four OAM modes at the 15% FEC threshold. In the experiment, a complexity reduction of 37% and 83% of the AffinityNet equalizer is taken compared to the conventional Volterra equalizer and CNN equalizer, respectively. The proposed equalizer is a promising candidate for a high-speed OAM-MDM optical fiber communication system.

Experimental demonstration of 201.6-Gbit/s coherent probabilistic shaping QAM transmission with quantum noise stream cipher over a 1200-km standard single mode fiber.

A probabilistic shaping (PS) quadrature amplitude modulation (QAM) based on Y-00 quantum noise stream cipher (QNSC) has been proposed. We experimentally demonstrated this scheme with data rate of 201.6Gbit/s over a 1200-km standard single mode fiber (SSMF) under a 20% SD-FEC threshold. Accounting for the 20% FEC and 6.25% pilot overhead, the achieved net data rate is ∼160Gbit/s. In the proposed scheme, a mathematical cipher (Y-00 protocol) is utilized to convert the original low-order modulation PS-16 (22 × 22) QAM into ultra-dense high-order modulation PS-65536 (28 × 28) QAM. Then, the physical randomness of quantum (shot) noise at photodetection and amplified spontaneous emission (ASE) noise from optical amplifiers are employed to mask the encrypted ultra-dense high-order signal for further improving the security. We further analyze the security performance by two metrics known in the reported QNSC systems, namely the number of masked signals (NMS) of noise and the detection failure probability (DFP). Experimental results show it is difficult or even impossible to extract transmission signals from quantum or ASE noise for an eavesdropper (Eve). We believe that the proposed PS-QAM/QNSC secure transmission scheme has the potential to be compatible with existing high-speed long-distance optical fiber communication systems.

Graded-azimuthal-index fiber as a control element for radial-index and orbital-angular-momentum modes of Laguerre-Gaussian beams

We propose an azimuthally varying graded-index fiber that can efficiently create and control a definite set of radial-index and orbital-angular-momentum (OAM) modes of Laguerre-Gaussian beams and their superpositions. A rigorous coupled-wave analysis formalism is developed, which provides a ready analysis for the azimuthal-refractive-index variation in the Laguerre-Gaussian basis. In particular, we present effective control in the generation and coupling of the various OAM modes, including radial-index modes of the Laguerre-Gaussian beam within the fiber, wherein the propagation length of the fiber and the wavelength act as the control parameters. We further present the possibility of switching every alternate channel in a wavelength division multiplexing protocol to a higher-order spatial mode within the optical fiber to substantially reduce interchannel crosstalk. The graded azimuthal index fiber can be utilized in high-speed fiber-optic communications as a versatile control element for OAM modes and the radial-index mode of the Laguerre-Gaussian beam transformation.

Method Analysis of Compensating Polarization Mode Dispersion in Optical Fiber Communication System

At present, optical fiber communication systems are developing in the direction of large capacity, high speed, long distance, etc., making nonlinear effects and polarization mode dispersion (PMD) and other optical fiber performance defects that were negligible for low-rate systems become the main factors limiting system upgrades and transmission distances. Polarization mode dispersion is an important factor affecting the performance of optical fiber communication systems, and it has become one of the main obstacles to the development of high-speed and long-distance optical fiber communication systems. It can cause pulse widening in the digital transmission system, thereby limiting the transmission rate of the system. Therefore, the influence of polarization mode dispersion on the transmission system and the compensation method are analyzed in this paper.

Training Free In-Service Chromatic Dispersion Estimation Using Power Spectrum Analysis for MZM Based IM/DD Optical Communication Systems

In high-speed optical fiber communications, chromatic dispersion (CD) estimation is essential for the monitoring and compensation of CD-induced impairments. Compared with coherent detection, in short-reach optical communication systems, intensity modulation/direct detection (IM/DD) is more widely used, and the existing dispersion estimation techniques usually require training signals or a large amount of data for curve fitting or machine learning. However, these methods cannot provide in-service estimation. This paper presents a novel technique for in-service CD estimation in IM/DD short-reach optical communication systems based on our derived analytical model. With the analytical model, the in-service CD estimation is realized via the direct power spectrum analysis of the received signal. Unlike previous studies that only work with single-frequency sinusoidal signals, the practical random data with the rectangular type of base waveform is considered in our model. Therefore, our method can be applied to the dispersion estimation of various pulse amplitude modulation (PAM) based systems. Our proposed training free in-service CD estimation method is verified and investigated, where results show that better than 0.5% accuracy in dispersion estimation can be achieved in optical communication systems with up to 40 GBaud data rate and 100 km transmission distance.

Design and analysis of high-speed data optical fiber communication system through EDFA amplifier system

Abstract This study presented design and analysis of high-speed data optical fiber communication system through EDFA amplifier system. The design with practical data for parameters to maximize the transmission bit-rate is clarified. The bit rate distance product can be optimized for the improvement of performance of high-speed long haul repeater spacing with amplification technique. The basic amplification system for optical fiber communication system is clarified. Transmitter/receiver components with the circuit connections and the operation are also indicated in details. The practical circuit model of the transmitter and receiver are designed clearly in this work. The design of distribution maps to measure the Q factor and minimum bit error rate and many different simulation models for applied to achieve high-speed data optical fiber communication system.

High-Speed Optical Fiber Communication in China

High-Speed Optical Fiber Communication in China

Special issue “optical communications, sensing, and laser applications”

Special issue “optical communications, sensing, and laser applications”

Modulation of Multichannel Electronic Communication Signal Parameters Based on a Nonlinear Phase Principle

In order to solve the difficulty of the optical fiber communication system and network as the infrastructure of the global communication network, which is faced with the requirement of large capacity and high speed, the author proposes a method to modulate the parameters of multichannel electronic communication signals based on the nonlinear phase principle. The method includes multichannel electronic communication signal search, multichannel electronic communication signal parameter modulation, and multichannel electronic communication signal automatic acquisition algorithm realization. Experimental results show that under the conditions that the sampling frequency is set to f = 8.145 MHz, the length of the C/A code period is set to 1 ms, and the 1 ms data packet contains 8145 sampling points, under the same experimental conditions, the capture probability of this experiment reaches 100% and the traditional algorithm has a capture probability of up to 70%. Modulation of multichannel electronic communication signal parameters based on nonlinear phase principle has a positive guiding role in building a high-speed optical fiber communication system and network with long distance, large capacity, high elasticity, high reliability, and low delay.

Modulation Characteristics of High-Speed Transistor Lasers

The spontaneous emission recombination lifetime of carriers in the active region of transistor lasers (TLs) is significantly reduced due to the accelerated carrier transport in the base region under the collector bias. Thus, it has the potential for use as a high-speed optical fiber communication light source. The unique three-electrode structure of TL notably enriches the modulation methods of the light source. As an important parameter to measure the data transfer rate, the modulation bandwidth of TL has been studied extensively. This paper briefly analyzes the inherent characteristics and advantages of TL and then discusses the progress in the research on TL modulation characteristics. Currently, the common methods to increase the modulation rate include optimizing the device structure, intracavity photon-assisted tunneling, and adding external auxiliary circuits. Through these techniques, single quantum well GaAs- based TL can achieve error-free transmission of 22 Gb/s, and simulation data show that for InP- based TL, this can reach 40 Gb/s. Finally, the challenges faced by TL in the area of optical fiber communication are elucidated.

Optical fiber nonlinearity equalizer with support vector regression based on perturbation theory

With the development of high-speed and large-capacity optical fiber communication technology, nonlinear damage has been one great obstacle to the development of optical fiber communication. Transmission distance and signal energy are two main factors that affect the nonlinear damage. The nonlinear compensation algorithm based on perturbation theory can compensate nonlinear damage. However, the coefficients of perturbation matrix cannot be calculated easily. In this paper, we make use of machine learning as a tool, propose an equalizer with support vector regression based on perturbation theory. For a 120 Gb/s, 375 km transmission distance, dual-polarization 64 quadrature amplitude modulation communication system, bit error ratio (BER) is lower than hard-decision forward error correction threshold 3.8×10−3 in the launched optical power (LOP) from -4 dBm to 3 dBm and when LOP is 1 dBm, BER is lower than forward error correction threshold 1.0×10−3 . Moreover, it is shown that the optimum LOP is increased by 2 dB.

Modeling and spectral analysis of high speed optical fiber communication with orthogonal frequency division multiplexing

Abstract Optical communication has emerged as the best solution to high-speed transmission systems due to its higher bandwidth and higher data rates. The higher data rates with simple transmitter and receiver modeling are one of the best solutions to design the spectrally efficient high-speed optical transmission system using different modulation techniques. In the recent past, optical communication networks have been specifically designed and optimized to support different communication standards increasing the capabilities of optic fiber, integrated waveguides, and related optical fiber hardware, and signal conditioning circuits. So, this research paper presents a study, modeling, simulation, and analysis of optical performance under different transmission systems which are considered in a practical high-speed design using orthogonal frequency division multiplexing (OFDM). This can be done by using both coherent detection OFDM and direct detection OFDM to minimize dispersion effects in optical communication because OFDM is basic for modern technology to increase the data rate and increase the requirement of bandwidth in broadband services. Many optical fiber problems, such as chromatic dispersion (CD) and polarization mode dispersion (PMD) are solved using OFDM. The performance analyses made in this work by using different parameters such as bit error rate (BER), optical signal-to-noise ratio (OSNR), quality (Q) factor at different distance transmission by using different quadrature modulation such as 4-QAM, 16-QAM, 32-QAM, and 64-QAM to maintain the OSNR value, spectral efficiency, and the required data rates. The simulated results have shown that the coherent detection OFDM and direct detection OFDM with considered QAM provides the best value of BER and quality of the signal at a specific distance.

Robust interference cancellation for differential quadrature phase-shift keying modulation with band limiting and adaptive filter

Differential quadrature phase-shift keying (DQPSK) modulation techniques and their variants are widely applied in digital communication, such as for high-speed optical fiber, bluetooth, or satellite communication. In its implementation, DQPSK cannot be separated from the potential harmful interference. In this research, a system model has been made for observation and analysis of the interference cancellation process. Discrete finite-duration impulse response (FIR) filters for band limiting and adaptive filter are the key components of the supporting block for this system model. Robust Simulink results have shown a significant increase in system performance in the existence of these key components. The indication has been shown by the best bit error rate (BER) of 3.3e-05. Constellation and eye pattern diagrams have supported the BER.

Nonlinear frequency domain PMD modeling and equalization for nonlinear frequency division multiplexing transmission.

Polarization mode dispersion (PMD) is one of the fundamental properties of a standard single-mode fiber. It affects the propagating signals and degrades the performance of high-speed optical fiber communication systems. PMD also gives an effect on the nonlinear spectra or scattering data in nonlinear frequency division multiplexing (NFDM) systems. However, PMD is usually described in the linear frequency domain, and there are few investigations about the influence of PMD in the nonlinear frequency domain (NFD). An NFD-PMD model is needed to understand the impact of PMD in the NFD. In this work, using a linear approximation method, we first propose an NFD-PMD model and verify its effectiveness. With the guide of the NFD-PMD model, a blind NFD-PMD equalization scheme is designed. The simulation results indicate that the proposed NFD-PMD equalization scheme has better performance than the training sequence method based on linear frequency domain equalization.

Design of Novel Optical Fiber Communication Electronic System and Big Data Prediction Method of Its Loss

For the shortcomings of traditional data communication electronic mode and bus interface, optical fiber communication electronic technology and compact peripheral component interconnect (CPCI) bus interface mode with industry standard are adopted to design a kind of optical fiber communication electronic data transmission mode. The optical fiber communication electronic board based on CPCI bus constitutes a novel optical fiber communication electronic system. In the process of hardware design, the small form-factor pluggable (SFP) transceiver module is used to convert the photoelectric signal and complete the transmission of optical fiber data. Regarding the existence of differential signal in high-speed serial circuit of electronic board, the wiring is reasonably arranged. The hardware test platform of optical fiber communication electronic system is built based on PCI9054 CPCI bus and industrial personal computer (IPC) communication electronics. FPGA with embedded high-speed serial transceiver module is adopted to design the hardware logic function. Binary gray code is used to count. FIFO protocol and Aurora protocol are supported. Protocol IP core is customized to realize the full duplex electronic communication of high-speed data. Considering the loss problem of the system, the grey model GM(1, 1), ARIMA model and Elman neural network are employed as the big data level research scheme, which are combined into the loss prediction model according to a certain proportion. In the experiment, the test of DMA data reading and writing function is designed, and the embedded highspeed transceiver module and optical fiber communication electronic logic function are simulated. The results show that the symbol error rate (SER) is always 0, and the low-pass filtering characteristics of the channel are effectively compensated, which makes the signal quality stabler. Compared with the single big data level research scheme, the combined model has smaller prediction error and higher prediction accuracy.

Adaptive filter and pulse-shaping for interference cancellation of differential quadrature phase-shift keying modulation

Differential quadrature phase-shift keying (DQPSK) modulation methods and variations are commonly used in wireless communication, including high-speed optical fiber, Bluetooth, and satellite communication. DQPSK cannot be isolated from possible interference with its present application. The interference cancellation process has been observed and analyzed using a device model built in this study. The core components of the supporting block for this device model have raised cosine filters for pulse shaping and adaptive filters. The presence of these core components has resulted in a dramatic improvement in device efficiency, according to robust Simulink data. The best bit error rate (BER) of 5.7e-03 provides evidence of this.