High-speed Optical Communication Research Articles

Effective regulation of the interaction process among three optical solitons

Abstract The interaction between three optical solitons is a complex and valuable research direction, which is of practical application for promoting the development of optical communication and all-optical information processing technology. In this paper, we start from the study of the variable-coefficient coupled higher-order nonlinear Schrödinger equation (VCHNLSE), and obtain an analytical three-soliton solution of this equation. Based on the obtained solution, the interaction of the three optical solitons is explored when they are incident from different initial velocities and phases. When the higher-order dispersion and nonlinear functions are sinusoidal, hyperbolic secant and hyperbolic tangent functions, the transmission properties of three optical solitons before and after the interactions are discussed. Besides, this paper achieves effective regulation of the amplitude and velocity of the optical solitons as well as of the local state of the interaction process, and interaction-free transmission of the three optical solitons is obtained with a small spacing. The relevant conclusions of the paper are of great significance in promoting the development of high-speed and large-capacity optical communication, optical signal processing and optical computing.

Research on High-Speed Digital Optical Signal Jitter Measurement Technology Based on Clock Recovery Algorithm Using Eye Diagram Opening Area

With the rapid development of information technology, high-speed digital optical signal transmission technology has become the core of modern communication networks. However, the increase in transmission rates brings challenges such as noise, distortion, and interference, which affect the accuracy of clock recovery. To address these issues, this study proposes a clock recovery algorithm based on the eye diagram opening area to improve the accuracy and efficiency of high-speed digital optical signal jitter measurement. The proposed method extracts clock information from the signal using the opening area and curvature characteristics of the eye diagram for jitter measurement. Experimental results demonstrate that the clock recovery algorithm based on the eye diagram opening area can stably reconstruct the signal eye diagram and obtain jitter parameters under different optical power conditions. At optical powers of -7.2 dBm, -12.2 dBm, and -17.2 dBm, the Q-factors were 8.8, 7.6, and 4.3, respectively, and the RMS jitter values were 12.2 ps, 13.4 ps, and 21.2 ps, respectively. At optical powers of -2.3 dBm, 0.1 dBm, 2.4 dBm, 4.6 dBm, and 6.0 dBm, the Q-factors were 9.1, 9.3, 9.5, 9.7, and 10.0, respectively, and the average jitter values were 8.9 ps, 8.5 ps, 8.0 ps, 7.5 ps, and 7.0 ps. These results indicate that the proposed algorithm performs excellently under low optical power conditions and maintains high recovery accuracy even when jitter increases at higher optical powers. The clock recovery algorithm based on the eye diagram opening area significantly improves the accuracy and stability of high-speed digital optical signal jitter measurement, enriches the theoretical research of clock recovery algorithms, and shows significant advantages in improving signal transmission quality, reducing bit error rate, and enhancing communication link reliability. The research outcomes provide key technical support for the optimization of modern high-speed optical communication systems.

Non-mechanical beam steering for high-speed optical wireless communications via electrowetting on dielectric

Electrowetting on dielectric (EWOD) is used for non-mechanical optical beam steering (OBS) in optical communication systems. High-capacitance ion gel is used to construct an efficient electrowetting interface that facilitates dynamic OBS. This integration facilitates precise control of beam steering and data transmission efficiency in optical wireless communication systems. An EWOD-based liquid prism (LP) manipulates beam direction via electrowetting. The theoretical framework is supported by the Young and Young-Lippmann equations for precise optical path control. We present a theoretical and experimental demonstration of a two-dimensional beam steering system using an EWOD-based LP, with beam steering up to 14.82° and 14.39° along the X and Y axes, respectively. The system achieves data rates of 1.9 Gbps in free-space optics (FSO) and 1.7 Gbps in underwater wireless optical communication (UWOC) systems, with a measured bit error rate that adheres to the standard threshold of the forward error correction limit. Our results suggest that the EWOD-based LP system offers a compact, efficient, and versatile design for optical devices in both FSO and UWOC systems.

High-speed high-power free-space optical communication via directly modulated watt-class photonic-crystal surface-emitting lasers

Photonic crystal surface-emitting lasers (PCSELs), which use a two-dimensional photonic crystal as the laser cavity, can achieve both high output powers and narrow beam divergence angles owing to single-mode lasing over a large area. High-speed, high-power, direct modulation of PCSELs is expected to realize compact and power-saving optical transmitters without bulky lens systems and fiber amplifiers for free-space optical communications. In this paper, we realize high-speed, high-power, free-space optical communication via directly modulated watt-class photonic-crystal surface-emitting lasers. We first numerically investigate the intrinsic (optical) and parasitic (electrical) frequency response characteristics of watt-class PCSELs with large lasing areas, and we show that several-GHz-class direct modulation is feasible even in watt-class PCSELs. Then, we fabricate a 500-µm-diameter PCSEL and simultaneously realize watt-class continuous-wave operation and several-GHz-class direct modulation. Finally, by directly modulating the developed PCSEL with a quadrature amplitude modulation (QAM) signal, we demonstrate free-space optical communication with over 10 Gbit/s high-speed transmission and virtual 5-km-class long-distance transmission even without using a transmitter lens.

An optoelectronic implantable neurostimulation platform allowing full MRI safety and optical sensing and communication

A novel programmable implantable neurostimulation platform based on photonic power transfer has been developed for various clinical applications with the main focus of being safe to use with MRI scanners. The wires usually conveying electrical current from the neurostimulator to the electrodes are replaced by optical fibers. Photovoltaic cells at the tip of the fibers convert laser light to biphasic electrical impulses together with feedback signals with 54% efficiency. Furthermore, a biocompatible, implantable and ultra-flexible optical lead was developed including custom optical fibers. The neurostimulator platform incorporates advanced signal processing and optical physiological sensing capabilities thanks to a hermetically sealed transparent nonmetallic casing. Skin transparency also allowed the development of a high-speed optical transcutaneous communication channel. This implantable neurostimulation platform was first adapted to a vagus nerve stimulator for the treatment of epilepsy. This neurostimulator has been designed to fulfill the requirements of a class III long-term implantable medical device. It has been proven compliant with standard ISO/TS10974 for 1.5 T and 3 T MRI scanners. The device poses no related threat and patients can safely undergo MRI without specific or additional precautions. Especially, the RF induced heating near the implant remains below 2 °C whatever the MRI settings used. The main features of this unique advanced neurostimulator and its architecture are presented. Its functional performance is evaluated, and results are described with a focus on optoelectronics aspects and MRI safety.

A metasurface-based full-color circular auto-focusing Airy beam transmitter for stable high-speed underwater wireless optical communications

Due to its unique intensity distribution, self-acceleration, and beam self-healing properties, Airy beam holds great potential for optical wireless communications in challenging channels, such as underwater environments. As a vital part of 6G wireless network, the Internet of Underwater Things requires high-stability, low-latency, and high-capacity underwater wireless optical communication (UWOC). Currently, the primary challenge of UWOC lies in the prevalent time-varying and complex channel characteristics. Conventional blue Gaussian beam-based systems face difficulties in underwater randomly perturbed links. In this work, we report a full-color circular auto-focusing Airy beams metasurface transmitter for reliable, large-capacity and long-distance UWOC links. The metasurface is designed to exhibits high polarization conversion efficiency over a wide band (440-640 nm), enabling an increased data transmission rate of 91% and reliable 4 K video transmission in wavelength division multiplexing (WDM) based UWOC data link. The successful application of this metasurface in challenging UWOC links establishes a foundation for underwater interconnection scenarios in 6G communication.

Thermal stress simulation analysis of aerospace optical fibers and connectors and related extensions to high-speed railway area

Aerospace optical cables and fiber-optic connectors have numerous advantages (e.g., low loss, wide transmission frequency band, large capacity, light weight, and excellent resistance to electromagnetic interference). They can achieve optical communication interconnections and high-speed bidirectional data transmission between optical terminals and photodetectors in space, ensuring the stability and reliability of data transmission during spacecraft operations in orbit. They have become essential components in high-speed networking and optically interconnected communications for spacecrafts. Thermal stress simulation analysis is important for evaluating the temperature stress concentration phenomenon resulting from temperature fluctuations, temperature gradients, and other factors in aerospace optical cables and connectors under the combined effects of extreme temperatures and vacuum environments. Considering this, advanced optical communication technology has been widely used in high-speed railway communication networks to transmit safe, stable and reliable signals, as high-speed railway optical communication in special areas with extreme climates, such as cold and high-temperature regions, requires high-reliability optical cables and connectors. Therefore, based on the finite element method, comprehensive comparisons were made between the thermal distributions of aerospace optical cables and J599III fiber optic connectors under different conditions, providing a theoretical basis for evaluating the performance of aerospace optical cables and connectors in space environments and meanwhile building a technical foundation for potential optical communication applications in the field of high-speed railways.

High-speed GeSn resonance cavity enhanced photodetectors for a 50 Gbps Si-based 2 μm band communication system

Expanding the optical communication band is one of the most effective methods of overcoming the nonlinear Shannon capacity limit of single fiber. In this study, GeSn resonance cavity enhanced (RCE) photodetectors (PDs) with an active layer Sn component of 9%–10.8% were designed and fabricated on an SOI substrate. The GeSn RCE PDs present a responsivity of 0.49 A/W at 2 μm and a 3-dB bandwidth of approximately 40 GHz at 2 μm. Consequently, Si-based 2 μm band optical communication with a transmission rate of 50 Gbps was demonstrated by using a GeSn RCE detector. This work demonstrates the considerable potential of the Si-based 2 μm band photonics in future high-speed and high-capacity optical communication.

Research on chaotic secure optical communication system based on dispersion keying with time delay signatures concealment

In response to the possibility of time delay (TD) signatures (TDSs) leakage becoming a serious problem in chaotic optical communication, from the perspective of improving the security of chaotic optical communication, this paper proposes a chaotic secure optical communication system based on dispersion keying, which generates signals with TDSs concealment characteristics. In this scheme, a common laser is used to drive chaotic synchronization between the transmitter and the receiver. The complex chaotic signal is generated by the combination of all-optical feedback and optical injection, and the TDSs are hidden by using the structure of dual filters and setting the parameters of each device reasonably. The switch is controlled by binary message to connect fiber Bragg gratings (FBGs) with different dispersion coefficients and maps different symbols to different chaotic attractors instead of the traditional way of directly sending messages to the channel. In addition, the generated signal no longer suffered from return map attacks. FBGs can compress and expand signals in the time domain to enhance the complexity of chaotic signals, and the dispersion value is an important key to effectively increasing the key space. Finally, the performance of TDSs concealment, sensitivity of parameter mismatch, and return map attack in this scheme are discussed in detail. The scheme still achieves a bit error rate (BER) of 1.74 × 10−4 when transmitting at a rate of 10Gbit/s under harsh communication environments such as 10 dB signal-to-noise ratio (SNR), which provides a reference for realizing high-speed and secure optical communication at the physical layer.

Narrow-linewidth and low RIN Tm/Ho co-doped fiber laser based on self-injection locking.

A narrow-linewidth and low relative intensity noise (RIN) Tm/Ho co-doped fiber laser based on a saturable absorber and self-injection locking was demonstrated for the first time. Utilizing self-injection locking technology, the frequency noise power spectral density is remarkably reduced by more than 17.1 dB from 1.21 × 106 Hz2/Hz to 7.30 × 103 Hz2/Hz when the frequency is approximately 1 kHz. Furthermore, a laser with a linewidth compressed to a quarter of the original linewidth from 44.386 kHz to 2.850 kHz, a RIN of less than -127.74 dB/Hz, and an optical signal-to-noise ratio of more than 71.6 dB can be obtained. Using a delay fiber, the relaxation oscillation peak frequencies move to lower frequencies, from 27.9 kHz to 15.8 kHz. The proposed laser is highly competitive in advanced coherent light detection fields, including coherent Doppler wind lidar, high-speed coherent optical communication, and precise absolute distance coherent measurement.

Leveraging Intermolecular Charge Transfer for High-Speed Optical Wireless Communication.

Intermolecular charge transfer (CT) complexes have emerged as versatile platforms with customizable optical properties that play a pivotal role in achieving tunable photoresponsive materials. In this study, we introduce an innovative approach for enhancing the modulation bandwidth and net data rates in optical wireless communications (OWCs) by manipulating combinations of monomeric molecules within intermolecular CT complexes. Concurrently, we extensively investigate the intermolecular charge transfer mechanism through diverse steady-state and ultrafast time-resolved spectral techniques in the mid-infrared range complemented by theoretical calculations using density functional theory. These intermolecular CT complexes empower precise control over the -3 dB bandwidth and net data rates in OWC applications. The resulting color converters exhibit promising performance, achieving a net data rate of ∼100 Mb/s, outperforming conventional materials commonly used in the manufacture of OWC devices. This research underscores the substantial potential of engineering intermolecular charge transfer complexes as an ongoing progression and commercialization within the OWC. This carries profound implications for future initiatives in high-speed and secure data transmission, paving the way for promising endeavors in this area.

Low-Temperature Growth of InGaAs Quantum Wells Using Migration-Enhanced Epitaxy.

The growth of InGaAs quantum wells (QWs) epitaxially on InP substrates is of great interest due to their wide application in optoelectronic devices. However, conventional molecular beam epitaxy requires substrate temperatures between 400 and 500 °C, which can lead to disorder scattering, dopant diffusion, and interface roughening, adversely affecting device performance. Lower growth temperatures enable the fabrication of high-speed optoelectronic devices by increasing arsenic antisite defects and reducing carrier lifetimes. This work investigates the low-temperature epitaxial growth of InAs/GaAs short-period superlattices as an ordered replacement for InGaAs quantum wells, using migration-enhanced epitaxy (MEE) with low growth temperatures down to 200-250 °C. The InAs/GaAs multi-quantum wells with InAlAs barriers using MEE grown at 230 °C show good single crystals with sharp interfaces, without mismatch dislocations found. The Raman results reveal that the MEE mode enables the growth of (InAs)4(GaAs)3/InAlAs QWs with excellent periodicity, effectively reducing alloy scattering. The room temperature (RT) photoluminescence (PL) measurement shows the strong PL responses with narrow peaks, revealing the good quality of the MEE-grown QWs. The RT electron mobility of the sample grown in low-temperature MEE mode is as high as 2100 cm2/V∗s. In addition, the photoexcited band-edge carrier lifetime was about 3.3 ps at RT. The high-quality superlattices obtained confirm MEE's effectiveness for enabling advanced III-V device structures at reduced temperatures. This promises improved performance for applications in areas such as high-speed transistors, terahertz imaging, and optical communications.

Integrated self-injection-locked narrow linewidth laser based on thin-film lithium niobate.

Narrow linewidth lasers have a wide range of applications in the fields of coherent optical communications, atomic clocks, and measurement. Lithium niobate material possesses excellent electro-optic and thermo-optic properties, making it an ideal photonic integration platform for a new generation. The light source is a crucial element in large-scale photonic integration. Therefore, it is essential to develop integrated narrow linewidth lasers based on low-loss LNOI. This study is based on the multimode race-track type add-drop microring resonator with multimode interferometric coupler (MMRA-MRR) of the DFB laser self-injection-locked, to achieve the narrowing of linewidth to the laser. The microring external cavity was used to narrow the linewidth of the laser to 2.5 kHz. The output power of the laser is 3.18 mW, and the side-mode suppression ratio is 60 dB. This paper presents an integrated low-noise, narrow-linewidth laser based on thin-film lithium niobate material for the communication band. This is significant for achieving all-optical device on-chip integration of lithium niobate material in the future. It has great potential for use in high-speed coherent optical communication.

Geometrically Shaped Odd-Bit QAM Constellations Suitable for Principal Component-Based Phase Estimation

For high-speed optical communication systems, laser phase noise (LPN) stands as a pivotal factor influencing the quality of the received signal. Therefore, the employment of a highly accurate carrier phase recovery (CPR) algorithm at the receiving end is indispensable to ensure the reliability of transmission. While a CPR algorithm called principal component-based phase estimation (PCPE) has been proven to be capable of achieving low-complexity and high-performance phase recovery for even-bit quadrature amplitude modulation (QAM) (i.e., square QAM) signals, it is not compatible with traditional cross-shaped odd-bit QAM signals. To circumvent this problem, a signal constellation design scheme based on geometric shaping (GS) is proposed. The pair-wise optimization (PO) algorithm is used to optimize the constellation structure of 32QAM and 128QAM signals in order to obtain results that are compatible with the PCPE algorithm. Monte Carlo simulation results reveal that for odd-bit QAM signals utilizing PCPE for phase recovery, the proposed GS constellations enhance the mutual information (MI) performance across the entire measured signal-to-noise (SNR) range. Moreover, compared with regular 32QAM and 128QAM constellations using the well-known blind phase search (BPS) algorithm, the proposed GS and PCPE scheme can achieve SNR gains of 1.10 dB and 2.59 dB, respectively, when considering the 20% soft-decision forward error correction (SD-FEC) overhead. Verification through commercial simulation software corroborates these findings, demonstrating that the proposed GS constellations are particularly suitable for the PCPE algorithm, especially under conditions of high optical signal-to-noise ratio (OSNR). To the best of our knowledge, this is the first time that the incompatibility between the PCPE algorithm and odd-bit QAM signals has been investigated, and the proposed GS scheme has broadened the application scope of the low-complexity CPR algorithm.

Hybrid integrated tunable external cavity laser with sub-10 Hz intrinsic linewidth

In this work, a hybrid integrated tunable external cavity laser (ECL) with a sub-10 Hz intrinsic linewidth is demonstrated. In this hybrid ECL, two Si3N4-based subwavelength hole defect assisted microring resonators, acting as high-Q laser reflectors, are butt-coupled with a chip-scale semiconductor optical amplifier at the two edges, respectively. The experimental results show that the hybrid ECL achieves a sub-10 Hz intrinsic linewidth across a wavelength tuning range from 1525 to 1565 nm, featuring a record lowest value of 6.06 Hz. The demonstrated hybrid ECL opens up opportunities toward the applications of high-speed optical communications and high-resolution light detection and ranging.

16QAM optical signal generation scheme based on weighted optimal Euclidean distance.

A two-dimensional signal constellation scheme for binary uniform memoryless source transmission in optical fiber channels is studied in this paper. In geometric shaping (GS), optimization algorithms are usually used to change the overall position of constellation points while maintaining the probability of constellation points unchanged. Different optimization functions are used to allocate the position of constellation symbols, thereby improving constellation performance. A 16 quadrature amplitude modulation (QAM) optical signal generation scheme based on weighted optimal Euclidean distance is proposed in this paper. In order to obtain the best constellation diagram and increase the shaping gain, the weighted optimal Euclidean distance that can minimize the bit error rate (BER) over multiple iterative optimizations is used as the objective function. On the one hand, the proposed 16QAM optical signal generation scheme based on weighted optimal Euclidean distance always outperforms the uniform square 16QAM and the uniform circle 16QAM schemes in the back to back (BTB) transmission. On the other hand, after analyzing the simulation demonstration in a 50GBaud coherent optical communication system over 3000km, results demonstrate that the optical signal to noise ratio (OSNR) performance of this system is better than that of the uniform square 16QAM and the uniform circle 16QAM, which is improved by 0.52dB and 0.85dB, respectively. In addition, the proposed 16QAM system increases the transmission distance by 989km and 741km, respectively, compared to the other two systems. The performance confirms that the proposed novel 16QAM scheme, to the best of our knowledge, can effectively improve the reliability and transmission distance. Therefore, the proposed scheme has a certain development prospect in the future long-distance transmission of high-speed optical fiber communication.

Nonlinear compensation for few-mode fiber MDM-WDM systems using probabilistic neural network

In this paper, we propose for the first time to apply probabilistic neural network (PNN) to fiber nonlinear compensation (NLC) in a high-speed coherent optical communication system that combines few-mode fiber (FMF) mode division multiplexing (MDM) with wavelength division multiplexing (WDM). By training on a small number of symbols, the PNN equalizer can compute the statistical distribution of the signal nonlinearity, make decisions on test symbols, and thereby compensate for the nonlinear impairments of the signals. To verify the effectiveness of the proposed scheme, we construct a MDM-WDM simulation system with 28 GBaud polarization division multiplexing (PDM) 16-quadrature amplitude modulation(QAM) and 64 GBaud PDM-64QAM, 6 spatial mode signals are transmitted over 11 wavelength channels with link lengths of 1500 km and 400 km, respectively. The results show that the PNN equalizer can make nonlinear judgments on received signals and effectively compensate the signal impairments caused by Kerr nonlinearity and device nonlinearity in a large launch power range after undergoing carrier phase recovery (CPR). Meanwhile, this scheme exhibits strong robustness against residual linear mode coupling (LMC), differential mode group delay (DMGD), and amplified spontaneous emission (ASE) noise. Finally, by the computational complexity comparison, it is proved that the complexity of the probabilistic neural network nonlinear compensation (PNN NLC) scheme is lower than that of digital back propagation (DBP) with comparable performance, which is on the order O(N).

High-speed data transmission based on mode-locked optical frequency comb

<sec>With the rapid development of emerging technologies such as multimedia services, live broadcasting, video conferencing, and high-definition television, traditional radio frequency communication is unable to meet people 's growing demand for communication capacity and transmission rate. In recent years, optical communication has received extensive attention from the industrial and scientific communities due to its advantages of large bandwidth, high speed, low power consumption, light weight, and strong anti-interference ability. As an emerging light source, the optical frequency comb (OFC) has a wide spectral range, multi-wavelength, high stability, and good phase coherence, providing a new idea for studying microwave signals with simple system structure, strong tunability and high frequency stability. At the same time, the multi-optical mode characteristics of OFC are compatible with the current communication system based on wavelength division multiplexing technology. Hundreds of laser arrays in a traditional communication system can be replaced by only one laser, which greatly reduces the power consumption of the system.</sec><sec>Combining the above advantages, in this paper, a large-scale parallel high-speed optical communication system based on mode-locked OFC is proposed. The linewidth of the OFC locked to the rubidium atomic clock can reach 1 Hz, which is sufficient to support the transmission of high-order modulation signals. The electro-optic modulators are used to adjust the amplitude and phase of each optical mode of the mode-locked OFC and self-coherently map to the RF domain. The high-speed high-order modulation signal with coded information is obtained by frequency screening through a narrow-band filter. The communication capability of the microwave photonic modulation signal in the 16 quadrature amplitude modulation (QAM) format is verified by simulation. The 16QAM communication with the rate of 2, 6, and 14 Gbit/s is realized by using the photonic microwave signal on the 100 m space optical link, and the bit error rate (BER) is less than 10<sup>–6</sup>. The proposed large-scale parallel optical communication system based on mode-locked OFC can achieve high-speed information transmission with a compact system structure, which is suitable for inter-satellite communication, emergency communication, military communication and other fields.</sec>

Stable and self-healing perovskite for high-speed underwater optical wireless communication

A water-resistant and self-healing perovskite light source employed for underwater wireless optical communication.

Multi-wavelength nanowire micro-LEDs for future high speed optical communication

Multi-wavelength nanowire micro-LEDs for future high speed optical communication