High-speed Communication Systems Research Articles

Research on High-Speed Digital Optical Signal Jitter Measurement Technology Based on Clock Recovery Algorithm Using Eye Diagram Opening Area

With the rapid development of information technology, high-speed digital optical signal transmission technology has become the core of modern communication networks. However, the increase in transmission rates brings challenges such as noise, distortion, and interference, which affect the accuracy of clock recovery. To address these issues, this study proposes a clock recovery algorithm based on the eye diagram opening area to improve the accuracy and efficiency of high-speed digital optical signal jitter measurement. The proposed method extracts clock information from the signal using the opening area and curvature characteristics of the eye diagram for jitter measurement. Experimental results demonstrate that the clock recovery algorithm based on the eye diagram opening area can stably reconstruct the signal eye diagram and obtain jitter parameters under different optical power conditions. At optical powers of -7.2 dBm, -12.2 dBm, and -17.2 dBm, the Q-factors were 8.8, 7.6, and 4.3, respectively, and the RMS jitter values were 12.2 ps, 13.4 ps, and 21.2 ps, respectively. At optical powers of -2.3 dBm, 0.1 dBm, 2.4 dBm, 4.6 dBm, and 6.0 dBm, the Q-factors were 9.1, 9.3, 9.5, 9.7, and 10.0, respectively, and the average jitter values were 8.9 ps, 8.5 ps, 8.0 ps, 7.5 ps, and 7.0 ps. These results indicate that the proposed algorithm performs excellently under low optical power conditions and maintains high recovery accuracy even when jitter increases at higher optical powers. The clock recovery algorithm based on the eye diagram opening area significantly improves the accuracy and stability of high-speed digital optical signal jitter measurement, enriches the theoretical research of clock recovery algorithms, and shows significant advantages in improving signal transmission quality, reducing bit error rate, and enhancing communication link reliability. The research outcomes provide key technical support for the optimization of modern high-speed optical communication systems.

Numerical and Experimental Demonstration of a Silicon Nitride-Based Ring Resonator Structure for Refractive Index Sensing

In optical communication and sensing, silicon nitride (SiN) photonics plays a crucial role. By adeptly guiding and manipulating light on a silicon-based platform, it facilitates the creation of compact and highly efficient photonic devices. This, in turn, propels advancements in high-speed communication systems and enhances the sensitivity of optical sensors. This study presents a comprehensive exploration wherein we both numerically and experimentally display the efficacy of a SiN-based ring resonator designed for refractive index sensing applications. The device’s sensitivity, numerically estimated at approximately 110 nm/RIU, closely aligns with the experimental value of around 112.5 nm/RIU. The RR sensor’s Q factor and limit of detection (LOD) are 1.7154 × 104 and 7.99 × 10−4 RIU, respectively. These congruent results underscore the reliability of the two-dimensional finite element method (2D-FEM) as a valuable tool for accurately predicting and assessing the device’s performance before fabrication.

Impact of Crystal Orientation on Modulation Bandwidth: Towards GaN LED-Based High-Speed Visible Light Communication

Light-emitting diodes (LEDs) with high modulation bandwidth are required for high-speed visible light communication applications. Crystal orientation in the GaN LED structure plays a key factor in its modulation bandwidth as the recombination lifetime is highly dependent on crystal orientation owing to the Quantum-Confined Stark Effect (QCSE). In this study, six different crystal orientation multi-quantum well (MQW) GaN LEDs are simulated to understand the impact of heterostructure orientation on modulation bandwidth, radiative recombination rates, and emission intensity. The results of this study demonstrate that semi-polar 101¯3¯ MQW LEDs provide the highest bandwidth in the current density range of 9–20 kA/cm2 compared to the other five orientations. For instance, the semi-polar 101¯3¯-based LED offers a modulation bandwidth of 912.7 MHz at 20 kA/cm2 current density. These results suggest that the semi-polar 101¯3¯ orientation-based LED has the potential to support a high-speed visible light communication system.

Optimizing Communication System Performance through Hybrid Modulation: A Comprehensive Analysis and Guideline

There is a clear need for dependable high-speed communication systems in light of 5G's recent rapid development. The enormous data that recently developed immersive media generate need to be transmitted, and traditional modulation techniques are unable to provide a suitable level of communication. Consequently, to improve communication system performance, hybrid modulation is needed. This paper examines the communication process and conducts a performance analysis to establish a reasonable method for choosing a hybrid modulation scheme. The constellation diagram, power spectral density, bandwidth efficiency, eye diagram, and bit error rate are the main components that determine a communication system's performance. Based on the analysis, the author concludes that to achieve a better-performing communication system, there must be a compromise between these performance factors. Specific recommendations are provided regarding performance indicators listed in the article, such as the constellation diagram, power spectrum density, bandwidth efficiency, eye diagram, and bit error rate. This work aims to address these issues to provide new researchers with guidance when selecting a hybrid modulation approach and to suggest a line of inquiry in the increasingly complicated and time-consuming age of large data volumes.

Hardware implementation of a mirror array-based optical intelligent reflecting surface for VLC: prototype and experimental results

Faced with growing demands for high-speed and reliable communication systems, optical intelligent reflecting surfaces (OIRS) have recently attracted a lot of interest in visible light communication (VLC). With potential applications in a variety of scenarios, including indoor wireless communications and the Internet of Things (IoT), OIRS is expected to have a transformative impact on optical wireless communications. However, current research is predominantly theoretical, and the hardware implementation of OIRS is insufficient. Therefore, this paper introduces an OIRS prototype based on a mirror array, which is capable of adjusting the reflected lightwave by manipulating the orientation of individual OIRS units to realize an adjustable optical wireless communication environment. Additionally, a hardware platform with a configurable control system for OIRS-based VLC has been developed in this paper. Finally, experimental results demonstrate significant improvements in the amplitude of the received signal and the signal-to-noise ratio of the developed prototype, thereby verifying the enhancement of communication efficiency and the potential of practical OIRS deployment.

Eye Surgical Equipment Sensor Board Testing Kit

The Eye Surgical Equipment Sensor Board Testing Kit utilizes Microcontroller and Raspberry Pi to diagnose PCBs, focusing on detecting Eye Surgical Sensor Board defects impacting signal integrity. With Microcontroller’s advanced features like high-speed ADCs and flexible GPIOs, it generates and processes signals accurately. Raspberry Pi enables real-time visualization of test results. This portable and cost-effective solution is suitable for industrial applications, empowering engineers and technicians to efficiently address Eye Surgical Sensor Board defects. By leveraging the computational power of both platforms, it offers a scalable approach to Sensor Board testing, enhancing reliability and performance in high-speed digital communication systems.

Dual-parameter controlled reconfigurable metasurface for enhanced terahertz beamforming via inverse design method

Recently, reconfigurable metasurfaces have emerged as a promising solution for wavefront manipulation in the terahertz (THz) region, providing enhanced beamforming capabilities. However, traditional single-parameter control methods fail to achieve independent phase and amplitude modulation, constraining their modulation capabilities. Meanwhile, forward design methods based on phase matching ignore the structural responses of the non-ideal unit, leading to degraded beamforming performance. Here, we introduce an electrically reconfigurable metasurface composed of bilayer graphene strips based on dual-parameter control. Full-wave simulations demonstrate independent amplitude and phase modulation, achieving the full 360° phase coverage and an adjustable amplitude range from 0 to 0.8 at 2.6 THz. To optimize beamforming performance, particularly for the responses of the non-ideal unit away from the designed frequency, we employed an inverse design method based on a hybrid evolutionary algorithm. This novel approach significantly enhances beam steering, achieving a maximum 60% increase in beam directivity and maintaining over 90% of ideal directivity across a broad frequency range from 1.6 THz to 5 THz. Especially, it achieves a maximum deflection angle of 75°. Meanwhile, the adaptability of the inverse design method is further demonstrated to various optimized objectives. For beam focusing, even with limited phase control (below 210°), this method significantly enhances the focusing quality (up to 150% enhancement) and increases the focusing efficiency from 25% to 40%. Additionally, it effectively mitigates the impact of quantized phase errors on beamforming. This research not only demonstrates potential applications in high-speed THz wireless communication and compact imaging systems but also paves the way for innovative designs in reconfigurable metasurfaces.

Game-Theory-Based Spectrum Sharing of Industrial IoT Networking in High-Speed Railway Heterogeneous Communication System

Game-Theory-Based Spectrum Sharing of Industrial IoT Networking in High-Speed Railway Heterogeneous Communication System

Sounding Reference Signal Optimization for High-Speed Rail Train-Ground Predictive Antenna Communication System

Sounding Reference Signal Optimization for High-Speed Rail Train-Ground Predictive Antenna Communication System

FPGA implementation of DTCWT architecture's high-speed DA structure for OFDM-based transceiver with CS

Communication systems at millimeter-wave (mm-wave) frequencies with high propagation losses use radio frequency (RF) budget analysis. RF system gains and losses ensure the receiver can recover the broadcast signal. Modern communication systems use compressive sensing (CS) and discrete wavelet transform (DWT). Hardware implementation is hard. Fieldprogrammable gate arrays (FPGA) adaptability, configurability, and processing speed make them popular. More mm-wave transceivers use FPGAs and advanced signal processing. FPGA-based mm-wave transceivers use compressed sensing and dual-tree complex wavelet transform (DTCWT). RF budget analysis recovers receiver signals. Energy and data efficiency transceivers have baseband processors, transmitters, and receivers. RF-to-mm-wave transmitter. Receiver demodulation and baseband conversion. CS and DTCWT processing modules boost baseband signal processing 5 Gbps Xilinx virtex-6 FPGAs. The system retrieves the signal while conserving power, according to simulations and testing. This study found that FPGA-based mm-wave transceivers can use advanced signal processing in future high-speed communication systems.

A metastable RNG using interleaved NAND- and NOR-based TEROs

ABSTRACT This study introduces a novel approach to address the limitations observed in existing random number generator (RNG) designs, focusing on the resolution for insufficiently covered problem statements and study purposes. In response to these challenges, we propose a high-throughput metastable-based RNG tailored for cryptography applications. Our design is featured with a two-layer transient effect ring oscillator (TERO) architecture, meticulously crafted to mitigate the locking phenomenon and enhance RNG randomness. Leveraging interleaved two-layer TEROs, realised through NAND and NOR SR latches, our RNG achieves unpredictable irregular sampling, crucial for cryptographic applications. To further enhance irregular sampling, the first layer of the RNG employs a multiplexer that selects inputs randomly. This multiplexer is governed by selection signals generated by the second layer of the RNG, ensuring superior randomness. Implemented using TSMC 40-nm CMOS process, our RNG passed the FIPS 140–1 randomness test at a clock frequency of 100 MHz, boasting a remarkable throughput of 50 Mbps. This study represents a significant advancement in RNG technology, addressing previous shortcomings and paving the way for high-speed communication systems’ secure cryptographic applications.

Geometrically Shaped Odd-Bit QAM Constellations Suitable for Principal Component-Based Phase Estimation

For high-speed optical communication systems, laser phase noise (LPN) stands as a pivotal factor influencing the quality of the received signal. Therefore, the employment of a highly accurate carrier phase recovery (CPR) algorithm at the receiving end is indispensable to ensure the reliability of transmission. While a CPR algorithm called principal component-based phase estimation (PCPE) has been proven to be capable of achieving low-complexity and high-performance phase recovery for even-bit quadrature amplitude modulation (QAM) (i.e., square QAM) signals, it is not compatible with traditional cross-shaped odd-bit QAM signals. To circumvent this problem, a signal constellation design scheme based on geometric shaping (GS) is proposed. The pair-wise optimization (PO) algorithm is used to optimize the constellation structure of 32QAM and 128QAM signals in order to obtain results that are compatible with the PCPE algorithm. Monte Carlo simulation results reveal that for odd-bit QAM signals utilizing PCPE for phase recovery, the proposed GS constellations enhance the mutual information (MI) performance across the entire measured signal-to-noise (SNR) range. Moreover, compared with regular 32QAM and 128QAM constellations using the well-known blind phase search (BPS) algorithm, the proposed GS and PCPE scheme can achieve SNR gains of 1.10 dB and 2.59 dB, respectively, when considering the 20% soft-decision forward error correction (SD-FEC) overhead. Verification through commercial simulation software corroborates these findings, demonstrating that the proposed GS constellations are particularly suitable for the PCPE algorithm, especially under conditions of high optical signal-to-noise ratio (OSNR). To the best of our knowledge, this is the first time that the incompatibility between the PCPE algorithm and odd-bit QAM signals has been investigated, and the proposed GS scheme has broadened the application scope of the low-complexity CPR algorithm.

Nonlinear compensation for few-mode fiber MDM-WDM systems using probabilistic neural network

In this paper, we propose for the first time to apply probabilistic neural network (PNN) to fiber nonlinear compensation (NLC) in a high-speed coherent optical communication system that combines few-mode fiber (FMF) mode division multiplexing (MDM) with wavelength division multiplexing (WDM). By training on a small number of symbols, the PNN equalizer can compute the statistical distribution of the signal nonlinearity, make decisions on test symbols, and thereby compensate for the nonlinear impairments of the signals. To verify the effectiveness of the proposed scheme, we construct a MDM-WDM simulation system with 28 GBaud polarization division multiplexing (PDM) 16-quadrature amplitude modulation(QAM) and 64 GBaud PDM-64QAM, 6 spatial mode signals are transmitted over 11 wavelength channels with link lengths of 1500 km and 400 km, respectively. The results show that the PNN equalizer can make nonlinear judgments on received signals and effectively compensate the signal impairments caused by Kerr nonlinearity and device nonlinearity in a large launch power range after undergoing carrier phase recovery (CPR). Meanwhile, this scheme exhibits strong robustness against residual linear mode coupling (LMC), differential mode group delay (DMGD), and amplified spontaneous emission (ASE) noise. Finally, by the computational complexity comparison, it is proved that the complexity of the probabilistic neural network nonlinear compensation (PNN NLC) scheme is lower than that of digital back propagation (DBP) with comparable performance, which is on the order O(N).

Mixed reality human teleoperation with device-agnostic remote ultrasound: Communication and user interaction

For many applications, remote guidance and telerobotics provide great advantages. For example, tele-ultrasound can bring much-needed expert healthcare to isolated communities. However, existing tele-guidance methods have serious limitations including either low precision for video conference-based systems, or high complexity and cost for telerobotics. A new concept called human teleoperation leverages mixed reality, haptics, and high-speed communication to provide tele-guidance that gives an expert nearly-direct remote control without requiring a robot. This paper provides an overview of the human teleoperation concept and its application to tele-ultrasound. The concept and its impact are discussed. A new approach to remote streaming and control of point-of-care ultrasound systems independent of their manufacturer is described, as is a high-speed communication system for the HoloLens 2 that is compatible with ResearchMode API sensor stream access. Details of these systems are shown in supplementary video demonstrations. Novel interaction methods enabled by HoloLens 2-based pose tracking are also introduced and tests of the communication and user interaction are presented. The results show continued improvement of the system compared to previous work in instrumentation, HCI, and communication. The system thus has good potential for tele-ultrasound, as well as possible other applications of human teleoperation including remote maintenance, inspection, and training. The remote ultrasound streaming and control application is made available open source.

Signal Pre-emphasis Technique for 10-60-MHz High-speed Implant Communication System with Bandwidth-limited Small Antennas

Signal Pre-emphasis Technique for 10-60-MHz High-speed Implant Communication System with Bandwidth-limited Small Antennas

High-speed data transmission based on mode-locked optical frequency comb

<sec>With the rapid development of emerging technologies such as multimedia services, live broadcasting, video conferencing, and high-definition television, traditional radio frequency communication is unable to meet people 's growing demand for communication capacity and transmission rate. In recent years, optical communication has received extensive attention from the industrial and scientific communities due to its advantages of large bandwidth, high speed, low power consumption, light weight, and strong anti-interference ability. As an emerging light source, the optical frequency comb (OFC) has a wide spectral range, multi-wavelength, high stability, and good phase coherence, providing a new idea for studying microwave signals with simple system structure, strong tunability and high frequency stability. At the same time, the multi-optical mode characteristics of OFC are compatible with the current communication system based on wavelength division multiplexing technology. Hundreds of laser arrays in a traditional communication system can be replaced by only one laser, which greatly reduces the power consumption of the system.</sec><sec>Combining the above advantages, in this paper, a large-scale parallel high-speed optical communication system based on mode-locked OFC is proposed. The linewidth of the OFC locked to the rubidium atomic clock can reach 1 Hz, which is sufficient to support the transmission of high-order modulation signals. The electro-optic modulators are used to adjust the amplitude and phase of each optical mode of the mode-locked OFC and self-coherently map to the RF domain. The high-speed high-order modulation signal with coded information is obtained by frequency screening through a narrow-band filter. The communication capability of the microwave photonic modulation signal in the 16 quadrature amplitude modulation (QAM) format is verified by simulation. The 16QAM communication with the rate of 2, 6, and 14 Gbit/s is realized by using the photonic microwave signal on the 100 m space optical link, and the bit error rate (BER) is less than 10<sup>–6</sup>. The proposed large-scale parallel optical communication system based on mode-locked OFC can achieve high-speed information transmission with a compact system structure, which is suitable for inter-satellite communication, emergency communication, military communication and other fields.</sec>

Metasurface-based High-Speed Photonic THz OAM Communication System

Metasurface-based High-Speed Photonic THz OAM Communication System

Method for the Simultaneous Generation of Two Nonlinear Pseudo Random Sequences: 5-ary and Binary

Multi-level signals and sequences have become a significant aspect of modern high-speed communication systems. Hence, to ensure the confidentiality and integrity of the transmitted information, advanced methods and devices are necessary to produce strong cryptographic properties for not only binary but also for nonbinary keystreams, which can be used in resource-constrained microcontrollers. The proposed method and apparatus generate both a balanced nonlinear 5-ary pseudo-random sequence and a binary keystream sequence. The nonlinearity is determined by applying shrinking and multiplexing techniques to the generated linear 5-ary pseudo-random sequence and the running zero in its conversion to a binary balanced sequence.

Performance analysis of OFDM with variations in cyclic prefix and FFT lengths

Orthogonal Frequency Division Multiplexing (OFDM) is a modern and suitable modulation strategy for commercial high-speed broadband wireless communication systems. This is because wireless services and demands have grown so quickly in recent years. While creating wireless communication, the channel environment is crucial. A square grid with identical vertical and horizontal spacing is used for the constellation points in quadrature amplitude modulation (QAM). More bits can be transferred per symbol to higher-order modulation forms. This research has looked at how Orthogonal Frequency Division Multiplexing OFDM systems perform using different modulation techniques on channels with additive white Gaussian noise (AWGN). Using MATLAB software to do an experiment with different modulation methods and parameters such as FFT length and cyclic prefix findings showed that 64-QAM modulation sends the same amount of data faster and with fewer symbols than QPSK 16-QAM. Here, the 64-QAM modulation technique performs better. An extensive literature survey has been carried out. The work done here involved working on many parameters to improve the performance of OFDM, i.e., by reducing BER, changing modulation techniques, and analyzing the trade-off between cyclic prefix length and Bit Error Rate. Compared to the existing work, the proposed system provides better performance.

Model of operation of a high-speed satellite communication system for rational distribution of frequency-energy and time resources in the space and ground segment

Model of operation of a high-speed satellite communication system for rational distribution of frequency-energy and time resources in the space and ground segment