High Sediment Supply Research Articles

Investigating relationships between shoreline process regime, shelf-margin architecture, and deep-water sand delivery: Insights from the early post-rift Hammerhead shelf margin (Bight Basin, southern Australia)

Shelf margins represent a crucial area along source-to-sink systems where sediments are partitioned from the shelf to slope and basin-floor areas. Reconstructing the evolution of these depositional systems is key for interpreting the interplay between past accommodation and sediment supply, and sediment dispersal mechanisms into deep water. In the Bight Basin, on the southern margin of Australia, the Hammerhead shelf margin prograded during the Late Cretaceous following break-up between Australia and Antarctica. This understudied interval offers important insights into source-to-sink processes in a post-rift, greenhouse, high sediment supply setting. A dynamic stratigraphic approach using high-resolution 3D seismic data across the Hammerhead shelf margin has been used to quantitatively characterise 28 clinothems developed over ∼ 1.9 Myrs each with an average duration of ∼ 67,000 years. By applying a shallow-marine process-based classification to shorelines, alongside quantitative analysis of the architecture of their coeval deep-water deposits downdip, statistical relationships and clear links between shallow-marine processes, stratigraphic architecture, and deep-water sand delivery are revealed. A statistically significant relationship between fluvial dominated shorelines, high slope gradients, and mass-transport deposit development is demonstrated, as is a requirement for fluvial influence at the shoreline for the initiation of long run-out turbidite systems. These long run-out turbidite systems are interpreted to have been formed by repeated density flows which lead to greater sediment transfer efficiency and increased sediment supply. This research has direct application to improve prediction of reservoir locations within the Bight Basin for resource exploration and/or carbon sequestration and may also be applied to improve deep-water sediment predictability in other basins worldwide developed in similar tectonic and climatic settings.

Architecture and dynamics of Precambrian linear megadunes: Galho do Miguel Formation, Mesoproterozoic, South-East Brazil

Recognizing the deposits of linear megadunes in ancient aeolian successions is challenging when the original bedform topography is not preserved. The present study provides a detailed analysis of the depositional architecture of an ∼ 80 m-thick interval of the Mesoproterozoic Galho do Miguel Formation (SE Brazil) to reconstruct the original morphologies of linear megadunes and to understand their dynamics. The depositional architecture reveals compound cross-bedded sets, which transition laterally into thick low-angle cross-stratified sets and planar-parallel sandstone beds. The depositional features indicate the presence of complex megadunes separated by adjoining wide dry inter-megadune areas, which were themselves flooded seasonally by a water table that rose above the depositional surface. Linear megadunes experienced two phases of development: vertical accretion and subsequent episode of lateral migration. During the vertical accretion phase, high sediment supply, typical of Precambrian aeolian systems, and the convergence of winds from two distinct directions promoted high rates of megadune growth, bedform elongation, and the formation of superimposed dunes. The lateral migration phase was characterised by a component of lateral bedform shift relative to the main along-crest sediment transport direction; this prevented preservation of a bimodal pattern of dune cross-strata azimuths. The accumulation of these deposits occurred via a combination of megadune climbing that occurred with progressive rise of the water-table level. The water-table rise hindered cannibalization of the lower parts of the migrating megadunes, allowing the accumulation and subsequent preservation of megadune sandstone packages. The rise of the water table was also responsible for the accumulation of thick dry inter-megadune strata. The unusual thickness of linear megadune and inter-megadune deposits of the Galho do Miguel Formation, as compared with Phanerozoic examples, are attributed to the interplay between the barren conditions of the early Earth, the morphodynamics of the linear megadunes, and the seasonal impact of the water table at the accumulation surface. Without a water-table control, opportunities for megadune accumulation and preservation were likely limited in Precambrian ergs.

River-fed basin-fill and hyperpycnites in an island-arc setting: The Silurian–Devonian Kekexiongkuduke Formation from Western Junggar, China

Sediments from land are primarily transported into basins through hyperpycnal flow, which plays a significant role in the process of basin filling. Various models of hyperpycnites have been proposed. This study examines a Silurian–Devonian basin-fill sequence in NW China to validate existing models and presents a visually compelling case demonstrating the process of basin filling through flood-dominated river discharge.The Utubulak Member of the Kekexiongkuduke Formation can be subdivided into three parts, representing basin floor, slope and shelf environments, collectively representing a regressive basin fill sequence. The lower part consists of flood-related turbidites contain or encompass material of terrestrial and marine origin, their sustained and pulsed velocity structures are similar to river discharge. These turbidites may result from basinal hyperpycnal flow or retrogressive failures of the shelf-edge (hyperpycnal) delta. The middle (slope deposits) contains bi-graded hyperpycnite bed interpreted commonly attributed to deposition by river floods exhibiting the classical waxing-waning configuration. Additionally, fine-grained deposits resulting from river-generated, dilute hyperpycnal or hypopycnal plumes are observed interbedded with the basin turbidites or slope background deposits. In the upper part, the presence of thick-bedded sandstones indicates that sustained hyperpycnal flow can transport sands to the shelf-edge/shelf, facilitating deep-water sand delivery. The vertical distribution of the various flood-related facies in basin floor, slope and shelf strata emphasize the complexity of hyperpycnites in different settings, and particularly highlighting challenges associated with their recognition in basin deposits.The investigated succession accumulated in an island-arc setting which provided a favorable condition for a river-fed turbidite system to develop. The narrow shelf facilitated transport of sediments by hyperpycnal flows directly into the basin, while erosion of high mountains promoted a high sediment supply for hyperpycnal flow. And a river-fed turbidite system commonly developed during the late stages of basin filling.

Using Ground-Penetrating Radar (GPR) to Investigate the Exceptionally Thick Deposits from the Storegga Tsunami in Northeastern Scotland

A submarine landslide on the edge of the Norwegian shelf that occurred around 8150 ± 30 cal. years BP triggered a major ocean-wide tsunami, the deposits of which are recorded around the North Atlantic, including Scotland. Ground-penetrating radar (GPR) was used here to investigate tsunami sediments within estuaries on the coast of northeastern Scotland where the tsunami waves were funnelled inland. Around the Dornoch Firth, the tsunami deposits are up to 1.6 m thickness, which is exceptionally thick for tsunami deposits and about twice the thickness of the 2004 IOT or 2011 Tohoku-oki tsunami deposits. The exceptional thickness is attributed to a high sediment supply within the Dornoch Firth. At Ardmore, the tsunami appears to have overtopped a beach ridge with a thick sand layer deposited inland at Dounie and partly infilled a valley. Later, fluvial activity eroded the tsunami sediments locally, removing the sand layer. At Creich, on the north side of the Dornoch Firth, the sand layer varies in thickness; mapping of the sand layer with GPR shows lateral thickness changes of over 1 m attributed to a combination of infilling an underlying topography, differential compaction, and later reworking by tidal inlets. Interpretation of the GPR profiles at Wick suggests that there has been a miscorrelation of Holocene stratigraphy based on boreholes. Changes in the stratigraphy of spits at Ardmore are attributed to the balance between sediment supply and sea-level change with washovers dominating a spit formed during the early Holocene transgression, while spits formed during the subsequent mid-Holocene high-stand are dominated by progradation.

Genetic types and provenance indication of clastic amphibole in the South Yellow Sea

The main focus of studying sediment sources in marine areas is to determine the properties of clastic minerals originating from different rivers. Variations in the characteristics of clastic minerals occur due to differences in the types of source rocks within the watershed. Determining the source rock of clastic minerals in the marine area can improve the accuracy of provenance analysis. Electron probe microanalysis of 258 amphibole grains from six surface stations in the South Yellow Sea (SYS) was conducted to calculate the numerical and characteristic values of cations in the crystal structure. The results showed that amphibole in the SYS is mainly magnesiohornblende (52.2% ~ 81.4%) in the calcic amphibole subgroup, followed by tschermakite. The source rock types of amphibole are mainly different types of magmatic (ultrabasic, basic, and intermediate acidic) and metamorphic rocks. Amphibole derived from intermediate-acid intrusive rocks accounts for a large proportion (>40%). The genetic analysis of clastic amphibole in the SYS showed that most of the medium-acid invading amphibole belong to crust-mantle type, followed by mantle type. Most of the amphibole from metamorphic origins are of medium-low pressure type (± 80%). Combined with electron probe analysis of amphibole from the Huanghe River (the Yellow River, HH) and Changjiang River (the Yangtze River, CJ), the amphibole in the SYS exhibits characteristics inherited from these two rivers. The northern sea area has a strong resemblance to the sediments from the HH, while the southern area is more influenced by sediments supply from the CJ. The central area represents a mixed zone with a higher sediment supply from the HH. The clastic amphibole deduces the type of source rock in different watersheds, serving as a crucial link between the source rock, watershed, and marine area, providing a basis for provenance analysis.

Architecture and evolution of shelf‐margin clinoforms developed in a back‐arc tectonic setting: Insights from quantitative analysis on the south‐west shelf margin of the Ulleung Basin

AbstractGeophysical and geological research in the Ulleung Basin has been ongoing since the 1970s, involving continuous seismic acquisition and multiple well‐drilling projects. This study utilized an integrated quantitative approach with conventional seismic interpretation based on recent trends to understand the history of the shelf‐margin development and individual controls that may have influenced each period in the Ulleung Basin. Quantitative analysis was conducted by measuring the progradation (Pse), aggradation (Ase) and sediment influx (Fc) of individual shelf margins in seven dip‐oriented seismic profiles, and calculating the shelf‐edge gradient (αse) and the P/A ratio. Based on these data and the ratio of accommodation to sediment supply (A/S ratio), which was interpreted from the stratal stacking pattern, five shelf‐edge trajectory types were defined and assigned to each shelf margin. By considering individual controls (eustatic fluctuations, sediment supply and tectonic events), we defined the three evolution intervals of the Ulleung Basin during the Middle Miocene to Late Miocene (15 to 6.5 Ma): (1) the upper Middle Miocene (15 to 11.63 Ma) characterized by a moderate sediment supply and high aggradation margin induced by rapid subsidence, (2) the lower Upper Miocene (10.8 to 10 Ma) as a high sediment supply and low aggradation margin associated with reworked sediments from the uplifted Dolgorae Thrust and (3) the uppermost Miocene (9.2 to 6.5 Ma) characterized by a low sediment supply and low aggradation margin experiencing sediment starvation. A comparison with worldwide continental margins indicated that the Ulleung Basin formed under a relatively low rate of progradation (low sediment supply; 4.79 km/Myr) and a high rate of aggradation (high shelf accommodation; 361.04 m/Myr) condition. The SW margin of the Ulleung Basin provides a unique example of understanding stratigraphic architecture variations under changing stress regimes of back‐arc setting (extensional to compressional) and understanding of individual controls that influence margin development.

Surviving from transgression to regression of Lake Pannon: Fan deltas of the Nemčiňany Fm. persisted across the rifting until the post-rift stage of the Danube Basin, western Slovakia

Successions deposited under rifting and post-rift settings of an isolated epicontinental basin often exhibit contrasting characteristics. Facies linked to transgression during basin rifting are typically locally sourced fan deltas transporting coarse-grained sediment, whereas the post-rift setup generally involves a normal regression marked by more extensive catchments, sediment sourced from greater distances, and an overall decrease in average grain size compared to the transgressive facies. In this study, we present a specific scenario based on a sedimentological, stratigraphic, and authigenic 10Be/9Be analysis of the Nemčiňany Formation, an Upper Miocene fan deltaic succession in the eastern Danube Basin, Slovakia. Deposition of the Nemčiňany Fm. was initiated shortly after ~11.6 Ma by the fourth rifting phase of the Pannonian Basin System, triggering the transgression of Lake Pannon. The depositional system persisted until ~9.6 Ma, likely balancing the increased accommodation rate with sediment supply in the shallow lake area situated on a basement high. Subsequently, a relative decrease in the accommodation rate prompted the progradation of shelf-slope scale clinoforms, originating from the Nemčiňany depositional system, toward the center of the Komjatice depression at ~9.4 Ma, resulting in a normal regression of Lake Pannon. The persistence of the Nemčiňany fan delta system, unlike common stratigraphic patterns, was associated to the high sediment supply yielded by the paleo-Hron river, which entered the basin in the study area. These observations underscore the need for caution in predicting provenance shifts during changes in geodynamic stages of a basin.

Depositional architecture and sequence stratigraphic framework of the fluvio‐lacustrine Ash Shumaysi Formation, Jeddah‐Makkah Region, Saudi Arabia: Implications for climatic and tectonic changes in a local‐scale sub‐basin

AbstractThis study aims to interpret and document the depositional architecture styles and sequence stratigraphic framework of the Ash Shumaysi Formation in the Jeddah‐Makkah region, the west‐central part of Saudi Arabia, and presents an example of rarely discussed, local‐scale sub‐basins (half grabens). It also shows the relationships between synchronous sedimentary processes and pre, syn and post‐rift conditions. The described lithofacies and their facies associations indicate the presence of seven architectural depositional styles: proximal‐distal braided fluvial, meandering fluvial (point bar), crevasse splay, floodplain, estuarine and lacustrine. A proposed depositional model for the Ash Shumaysi Formation is drawn. The Ash Shumaysi Formation forms a second order depositional sequence, which is organised into two third order depositional sequences (sequences I and II) bounded by three sequence boundaries. Each third‐order sequence encloses the low accommodation systems tract and high accommodation systems tract. The low accommodation systems tract represents the coarse‐grained, braided‐distal fluvial facies developed during low accommodation space associated with high sediment supply (high discharge). The high accommodation systems tract encloses the fine‐grained deposits of point bar, estuarine and lacustrine facies that reflect the creation of significant accommodation space and low sediment supply (low discharge). Vertical and lateral variations of the inferred depositional architectural styles, sequences and systems tracts reflect that tectonic forces and climate are the main controlling factors during deposition of the Ash Shumaysi Formation, although base‐level changes in response to sea‐level changes cannot be ruled out.

Multi-annual and multi-decadal evolution of sediment accretion in a saltmarsh of the French Atlantic coast: Implications for carbon sequestration

Coastal marshes offer natural solutions for adapting to and mitigating the effects of climate change and sea level rise. However, the resilience of the marsh physical system and, with it, the ecosystem services that it provides, is largely site specific. This calls for the increase in the spatial cover of coastal marsh studies in order to assess the controlling factors of marsh evolution, and their long-term carbon storage capacities. Here, we study the spatio-temporal variations in sedimentation rates and organic carbon (OC) sequestration capacity of the macrotidal minerogenic saltmarshes in Aiguillon Bay, belonging to one of the largest French coastal marshes. Supported by aerial photographs and satellite image analysis, we first show that saltmarshes of the Aiguillon Bay have prograded at very high rates, up to 14 m yr−1 since 1950. Sediment accumulation rates (SAR) were estimated at both multi-annual to multi-decadal scales based on two approaches: (i) LiDAR-based digital elevation models from multiple acquisition dates (2010–2021); and (ii) depth profiles of 210Pb in excess and 137Cs in sediment cores collected along cross-shore transects in the saltmarshes. Long-term SAR range from 0.8 to 2.2 cm yr−1 and are among the highest reported worldwide for equivalent systems. The positive accretion balance (accretion rate minus local sea-level rise rate) provides important clues on marsh resilience suggesting that the Aiguillon Bay is currently able to adapt to rising sea level. Despite relatively low organic carbon content (1.3–6.0%), high SAR leads to high carbon sequestration rates (99–345 gC m−2 yr−1; or a mean value of 2.5 Mg C ha−1 yr−1). The isotopic signature of sediment OC reveals a significant and rapid decomposition of organic material in surface cores, while allochthonous sediment of marine origin dominates the signature of chemically-stable OC of marsh sediments. This implies that the carbon sequestration capacity of minerogenic saltmarshes, such as those of the Pertuis Charentais, also depends upon the wealth of adjacent coastal environments through high sediment supply and primary productivity.

Rethinking Variability in Bedrock Rivers: Sensitivity of Hillslope Sediment Supply to Precipitation Events Modulates Bedrock Incision During Floods

AbstractBedrock rivers are the pacesetters of landscape evolution in uplifting fluvial landscapes. Water discharge variability and sediment transport are important factors influencing bedrock river processes. However, little work has focused on the sensitivity of hillslope sediment supply to precipitation events and its implications on river evolution in tectonically active landscapes. We model the temporal variability of water discharge and the sensitivity of sediment supply to precipitation events as rivers evolve to equilibrium over 106 model years. We explore how coupling sediment supply sensitivity with discharge variability influences rates and timing of river incision across climate regimes. We find that sediment supply sensitivity strongly impacts which water discharge events are the most important in driving river incision and modulates channel morphology. High sediment supply sensitivity focuses sediment delivery into the largest river discharge events, decreasing rates of bedrock incision during floods by orders of magnitude as rivers are inundated with new sediment that buries bedrock. The results show that the use of river incision models in which incision rates increase monotonically with increasing river discharge may not accurately capture bedrock river dynamics in all landscapes, particularly in steep landslide prone landscapes. From our modeling results, we hypothesize the presence of an upper discharge threshold for river incision at which storms transition from being incisional to depositional. Our work illustrates that sediment supply sensitivity must be accounted for to predict river evolution in dynamic landscapes. Our results have important implications for interpreting and predicting climatic and tectonic controls on landscape morphology and evolution.

Quaternary stratigraphy of southern Vietnam continental margin

This study investigates the stratigraphic architectures of the South Vietnam continental margin (SVCM) from the Pliocene to the recent period. We have utilized high-resolution seismic data and sediment core data to achieve this. The study reveals that the Quaternary sequences on the continental margin are bounded by composite erosional surfaces, which were formed due to sub-aerial erosion during periods of sea level fall and subsequent reworking processes during sea level rise. The Quaternary sequence can be divided into two subsequences: the Early Pleistocene and the Middle Pleistocene-Holocene. The Middle Pleistocene-Holocene sequences can be subdivided into six fourth-order sequences, each lasting approximately 100 to 120 thousand years. These sequences are well-preserved on the outer shelf at a modern water depth of around 100 to 120 meters. Seismic stacking patterns indicate that regressive deposits predominantly dominate the Quaternary stratigraphy of the SVCM. This means that sediment deposition during the Quaternary period was more pronounced during periods of sea-level fall. The outer shelf margin of the modern continental margin shows a south-to-southeastward migration of prograding clinoforms, indicating sediment progradation in these directions. The thick Quaternary regressive deposits preserved on the outer shelf are attributed to various factors. These factors include the low shelf gradient, tectonic subsidence, regional hinterland uplift, monsoon strengthening, and high sediment supply from the Palaeo-Mekong Delta during sea-level fall. The interaction of these factors facilitated the accumulation of thick sedimentary deposits during falling sea levels. The mid-late Pleistocene stratigraphy of the SVCM shows similarities to many other continental margins worldwide. These margins are mainly shaped under the influence of asymmetric 4th-order Milankovitch cycles. These cycles are driven by variations in Earth's orbital parameters and are characterized by longer phases of relative sea-level fall followed by shorter periods of stabilization and rise.

Quantifying the sensitivity of distributive fluvial systems to changes in sediment supply and lake level using stratigraphic forward modelling

ABSTRACTStratigraphic forward modelling has been used to quantify the sensitivity of sandbody connectivity in a distributive fluvial system to changes in sediment supply and lake level. Recent stratigraphic forward modelling using SedsimX from StrataMod Pty Limited of the Oligocene to Miocene Huesca distributive fluvial system in northern Spain was used as a base‐case for this sensitivity analysis. Based on literature research and initial modelling, a sediment supply sensitivity range of 0.22 to 21.85 km3/kyr and lake‐level sensitivity range of −1000 to 1000 mm/kyr were used. Results show that the stratigraphic architecture of the modelled distributive fluvial system is more sensitive to changes in sediment supply than to changes in lake level. While an increase in the rate of sediment supply results in an increase in preserved average grain size, aggradation rates and sandbody connectivity at the same distance from the apex, the average grain size, aggradation rate and sandbody connectivity all decrease with increasing distance from fan apex. The main difference in the stratigraphic architecture can be found in the proximal zones. Only oversupplied models, with much higher sediment supply than the base‐case, deposited fully amalgamated channelized deposits with laterally continuous, tabular beds with occasional scoured surfaces. Models with base‐case sediment supply contain channelized sandy deposits within a fine‐grained floodplain environment. Models with sediment supply much lower than the base‐case had no deposition in the proximal zone. Lake‐level rise leads to reduced distal erosion of sediments, concentration of silts close to the lake shore, and higher aggradation rates and thicker sandbodies in the proximal zone. The sensitivity analysis highlights that the parameters governing the formation of distributive fluvial systems have different weightings but are ultimately all interconnected and interdependent. This quantitative framework can be used as a predictive tool for subsurface exploration in distributive fluvial systems.

Distinguishing different classes of mass-transport deposits in LPIA strata exposed in eastern Paraná Basin, Brazil

Ice age mass-transport deposits (MTD) occur in multiple stratigraphic intervals within the Permocarboniferous Itararé Group, in the Paraná Basin, and are exposed in several disconnected quarries and road cuts around the region of Mafra, southern Brazil. The most typical deposits are diamictites with muddy matrix, but silty-sandy diamictites and metric intercalations of deformed layers of sandstones and siltstones occur subordinately. Similar MTD facies have been described from better exposed and time equivalent successions in western Argentina. There, because of the km-scale exposures, MTDs can be mapped in their plenitude, giving better insights about their emplacement. In this paper, we describe the Brazilian MTDs and infer their modes of transport and deposition supported by comparisons with published Argentinean examples. Based on matrix constitution, presence of coherent blocks and rafts, and sedimentation phases, at least four types of MTDs can be identified: 1) Mud-rich MTD and isolated sandstone blocks; 2) Resedimented MTD represented by diamictites with folded blocks of diamictite, possibly corresponding to two phases of remobilization; 3) Sand/silt-rich MTD (evolved stage), and formed by deformed bands of sandstones and siltstones (mature stage); and 4) MTD with rafts of heteroliths and sandstone blocks. Usually MTDs rest on and scour into a fine-grained substrate such as thin-bedded turbidites and shale. The regional geological setting at Mafra points to an open embayment. The collapse of inclined depositional slopes related to high sediment supply associated with deglaciation was the major control on MTD development. However, the inferred proximity of the ice margin during slope failure was variable, suggesting MTD formation during different stages of a glacial cycle.

Maximizing blue carbon stocks through saltmarsh restoration

Political discourse around coastal wetland restoration and blue carbon management strategies has increased in the past decade, yet carbon storage has neither been a reason for restoration, nor a criterion to measure the success of current saltmarsh restoration schemes in the UK. To maximise climate change mitigation through saltmarsh restoration, knowledge on the key drivers of carbon stock variability is required. We use restored saltmarshes of similar age, paired with adjacent natural marshes as references, to identify drivers of carbon stocks following managed realignment within an estuary in southeastern England. From surficial soil cores (top 30 cm), we measured carbon stock alongside environmental characteristics. Carbon stock between natural and restored sites were similar after ~ 30 years when restored sites were above mean high water neap (MHWN) tidal levels. Elevated marsh platforms likely provide suitable conditions for the development of mature plant communities associated with greater capture and production of organic carbon. The restored site at Tollesbury (Essex, UK) had a 2-fold lower carbon stock than other restored sites in the estuary. We attribute this to the site’s low position in the tidal frame, below MHWN tidal levels, coupled with low sediment supply and the dominance of pioneer plant communities. As blue carbon is anticipated to become an important facet of saltmarsh restoration, we recommend that sites above MHWN tidal levels are selected for managed realignment or that preference is given to coastlines with a high sediment supply that may rapidly elevate realignment sites above MHWN. Alternatively, elevation could be artificially raised prior to realignment. Restoration schemes aiming to maximise climate change mitigation should also encourage the establishment of key plant species (e.g., Atriplex portulacoides in our study) to enhance carbon stocks. However, the overall goal of restoration ought to be carefully considered as trade-offs in ecosystem services may ensue if restoration for climate change mitigation alone is pursued.

Multi-Proxies Analysis of Organic Matter Accumulation of the Late Ordovician–Early Silurian Black Shale in the Lower Yangtze Region, South China

The evolutional process of palaeoceanic environment and its effect on the accumulation of organic matter during the Ordovician–Silurian transition in Lower Yangtze region has been overlooked compared to that in Upper Yangtze region of South China, although their paleogeographic settings were expected to be discrepant. This paper documents the marine depositional environment, paleoclimate, and sediment supply changes, and discusses their roles in controlling the organic matter enrichment in sedimentary rocks within the Ordovician–Silurian transition of the Lower Yangtze region, using the latest geochemical data of the continuous drilling core. The stratigraphic framework of the Ordovician–Silurian transition in the Lower Yangtze region is composed of two third-order sequences, each of which can be subdivided into a lower TST (transgressive systems tract) and an upper RST (regressive systems tract). TST1 represented an evident depositional transition stage which was marked by the ending of the underlying carbonate sediments and the initiation of the terrigenous clastic-dominated sediments. Geochemical proxies indicate that the relatively low productivity, dysoxic water column condition, and high sediment supply flux collectively resulted in inadequate organic matter hosted in deposits of the TST1. During the depositional period of RST1, the global sea level declined due to the Hirnantian glaciation age. The icehouse also caused the decrease in overall river flux and, thus, the terrigenous clastic sediment supply. The icehouse also strengthened the upwelling that occurred in the Lower Yangtze sea. The upwelling boosted the marine algae explosion through the delivery of abundant nutrients, which not only enhanced paleoproductivity but also led to an anoxic environment by oxygen consumption. Such high paleoproductivity, anoxic water column environment, and low sediment supply flux caused the deposition of organic-rich shale. The sea level rose during the TST2 due to the ending of an ice age. The relatively large water depth and high paleoproductivity associated with volcanic eruptions are the main factors that caused the enrichment of organic matter during this stage. During the deposition of RTS2, the increase of sediment supply flux resulted in a decrease in accommodation space and water depth and the dilution of organic matter in deposits, which was the primary constraint of organic matter accumulation.

Anatomy of a diamondiferous gravel barrier spit at the palaeo‐Orange River mouth, south‐western Namibia

ABSTRACTThe sedimentary facies architecture of a Plio‐Pleistocene diamond‐bearing gravel barrier spit within the palaeo‐Orange River mouth in south‐western Namibia has been revealed during onshore mining activities. Four sedimentary facies associations build this ancient coastal landform and have been interpreted, from a seaward to landward direction, as sediments in: (i) the foreshore, represented by an intertidal beach; (ii) a subtidal spit platform on which the spit developed; (iii) storm‐constructed spit head recurves on the landward side of the spit; and (iv) an estuarine back‐barrier. This sedimentary record reflects an evolving spit that grew in response to a combination of marine and fluvial processes in a wave‐dominated, high‐energy coastal regime. Here, the southern Atlantic Ocean aggressively dispersed sediment delivered by a Plio‐Pleistocene Orange River, ensuring that the fine‐grained sediments were removed to allow only the gravel fraction to build up along the coastline. This extreme dispersal of sediment also precluded the construction of a classic delta; hence sediment storage offshore of the river mouth was limited and spit growth was dependent on the direct supply of river sediment. In response to the intermittent supply of sediment, spit growth and decay alternated during periods of sediment abundance and starvation, respectively. During positive sediment budget, the spit extended northward and cut off parts of the mainland to form an estuarine back‐barrier. Foreshore and spit head progradation was sustained under these conditions, and formed a beach‐ridge plain with a topographic expression of several coast‐parallel ridges that curved at the spit head into the back‐barrier. Spit extension and recurve development were controlled by a combination of high sediment supply, a vigorous longshore drift and powerful waves approaching from various directions. This Plio‐Pleistocene coastal landform in Namibia offers a depositional model relevant to gravel‐dominated barrier spits near river mouths along wave‐dominated clastic coasts.

Lateral Erosion of Bedrock Channel Banks by Bedload and Suspended Load

AbstractBedrock rivers carry large amounts of fine sediment in suspension. We developed a mechanistic model for erosion of bedrock channel banks by impacting bedload and suspended load particles that are advected laterally by turbulent eddies (advection‐abrasion model). The model predicts high lateral erosion rates near the bed, with rates decreasing up to the water surface. The model also predicts greater erosion within the suspended load layer than the bedload layer for many typical sediment supply and transport conditions explored. We compared the advection‐abrasion model with a previously derived model for lateral erosion of bedrock banks by bedload particles deflected by stationary bed alluvium (deflection‐abrasion model). Erosion rates predicted by the deflection‐abrasion model are lower, except within limited conditions where sediment is transported near the threshold of motion and the bed is near fully covered in sediment. Both processes occur in bedrock rivers at the same time, so we combined the advection‐abrasion and deflection‐abrasion models and found that the lateral erosion rate generally increases with increasing transport stage and relative sediment supply for a given grain size. Application of our combined‐abrasion model to a natural bedrock river with a wide distribution of discharge and supply events, and mixed grain sizes, indicates that finer sediment dominates the lateral erosion on channel banks in low sediment supply environments and can be as important as coarser sediment in high sediment supply environments.

Relative sea‐level control on the building of two distinct shelf‐margin clinothems on the late‐Quaternary Pearl River margin: Insights from numerical stratigraphic forward modelling

AbstractAs one of the most important forcing factors, relative sea‐level changes exert a major influence on the building of shelf‐margin clinothems. However, it is still not well understood how these changes control the growth of shelf edges and the condition of sediments transporting into deep water, especially over the individual‐clinothem scale of several 100 ky. On the late‐Quaternary Pearl River margin, there are two distinct shelf‐margin clinothems: SQ3 and SQ4. They have different shelf‐edge trajectories (slight rising vs. steep rising) and different styles of deep‐water deposition (fan lobes consisting mainly of MTDs vs. fan lobes consisting mainly of turbidites). This work takes those SQ3 and SQ4 as study objects and runs a total of 136 experiments from the Dionisos stratigraphic forward model to investigate how relative sea‐level changes control the trajectories of shelf edges and the volumes of MTDs in deep water over the individual‐clinothem scale. Our quantitative results suggest that under the geological background of high sediment supply on the late‐Quaternary Pearl River margin, the duration of highstand systems tracts (HST) relative to lowstand systems tracts (LST) or forced regressive systems tracts (FST) has a significant influence on the building of individual shelf‐margin clinothems. If the relative duration of HST is either very short or very long, slight‐rising shelf‐edge trajectories and large‐volume MTDs would be formed, whereas if the relative duration of HST is comparable with LST or FST, steep‐rising shelf‐edge trajectories and limited MTDs would be formed. Through the constrains of the model set to the real geological condition of the SQ3 and SQ4 clinothems, it is found that SQ3 was caused by the quite long relative duration of HST, which made highstand deltaic systems advance over the pre‐existing shelf‐slope break, leading to significant accretion and instability of the shelf edge and thus, giving rise to the formation of slight‐rising shelf‐edge trajectories and fan lobes with high MTDs contents. SQ4, however, formed as a result of the comparable durations of HST, LST, and FST, which made highstand deltaic systems advance to but not beyond the previous shelf‐slope break allowing the subsequent FST to be directly perched on the clinoform slope. Such building processes did not drive pronounced accretion and instability of the shelf edge and thus, caused the formation of steep‐rising shelf‐edge trajectories and fan lobes with low MTDs contents.

Flume experiment study of the formation process and sedimentary characteristics of a shallow‐water delta

This paper investigates the influence of water level oscillation and sediment supply volume on shallow‐water delta development by means of a flume experiment. The experiment simulated the natural water level by dividing a cycle of sediment period into four parts: the draught period, the flood period (FP), the interflood period in a falling limb (IPF) and the interflood period in a rising limb (IPR). During the FP, flooding broke former channels and a large amount of sediments were evenly unloaded at the surface of lobes. Erosion often appeared at the beginning of the IPF and was dominant at low stand. Most sediments were concentrated in incised valleys and unloaded at the channel mouth to form a new lobe during the falling limb. Erosional channels and lobes were broken at the IPR. Sediments homogeneously covered the surface of lobes and few new lobes appeared during the period. Different sediment supplies influenced the characteristics of incised valley and channel style. Low sediment supply to the delta was strongly influenced by water level change, while high sediment supply was mainly affected by fluvial processes. Based on the flow sand content of water, channels can be classified into four types: (a) narrow and deep multiple channels, (b) narrow and shallow branch channels, (c) broad and shallow main channels, and (d) broad and deep stable channels. Their width‐to‐depth ratios are 1.1–3.5, 5.1–12.9, 7.3–20.2, 2.6–4.6, respectively. Most mouth bars were initially formed but then broken by water level oscillation and channel bifurcation. The preserved mouth bars were well preserved at the far end of lobes, where they entered the low‐energy environment.

The largest Quaternary inland eolian system in Brazil: Eolian landforms and activation/stabilization phases of the Xique-Xique dune field

Eolian systems are sensitive to vegetation and climate changes, but also to the sediment supplied by neighbor depositional systems. This sensitivity is manifested in the alternation between periods of sand dune mobility and stability. In the Xique-Xique eolian system, the largest Quaternary interior dune field in Brazil (∼8000 km2), the neighboring depositional system responsible for the sand supply is the São Francisco River. We interpreted periods of dune activity and stabilization by mapping eolian landforms of this system, describing depositional facies under them and dating by optically stimulated luminescence (OSL-SAR). The stabilized parabolic landforms characterized and mapped (all formed by SE to E winds) were simple megadunes (25.5 ± 4.4 to 5.8 ± 2.0 ka), compound dunes (15.8 ± 1.2 to 5.2 ± 1.4 ka) and perched dunes (14.0 ± 1.0 and 1.2 ± 0.1 ka). We also recognized eolian plains (14.0 ± 2.1 to 6.5 ± 0.7 ka) and active parabolic dunes. Eolian deposits of undifferentiated landforms have also been described and dated (253.8 ± 19.0 to 8.2 ± 1.3 ka). The ages obtained allowed identification of two main phases of dune activity (∼60 to 18 ka and ∼16 to 5 ka) separated by a short period of stabilization marked by a paleosol (∼18 ka). The main periods of eolian activity are associated with phases of fluvial aggradation and high sediment supply, whereas dune stabilization since 5 ka is correlated with low sediment supply during the Late Holocene fluvial incision phase. The periods of eolian activity and stabilization respond not only to climate changes in the area occupied by the eolian system but mainly to local fluvial sediment supply by the river, which in turn can respond to more regional climatic controls. The Xique-Xique eolian system results from the coupling of abundant sediment supply from the fluvial system, high eastern wind speeds, and a significant wind deceleration caused by mountains on the western border of the dune field.