High-rise Apartment Buildings Research Articles

Noise reduction and visual disturbance performances of horizontal facade profiles for a multi-story high-rise apartment building

This paper simulates the noise reduction performance of horizontal profiles installed on the façade to reduce the external noise in high-rise residential buildings. The simulation used commercial software based on the ray tracing method and evaluated the performance by modeling a representative rectangular-shaped 30-story apartment building in South Korea. The simulation assumed a four-lane road traffic noise source parallel to the front of the apartment. The key simulation values were cited from configurations derived in previous studies. The sound absorption points were set at the center of each living room on every floor, and windows facing the road were considered for ventilation, being set to be partially open. Horizontal profiles for noise reduction were placed on the exterior of the building, starting from the 20th floor, with protrusion height and vertical spacing as variables. These profiles were combined with noise barriers to assess their impact. As a result, it was confirmed that the noise barrier only reduced the noise in the lower floors, while the horizontal profiles on the upper part of the building could also reduce noise in the upper floors. Additionally, the paper discusses the visual disturbance of the horizontal facade profiles visible from the living rooms.

Development of Prefabricated Additional Insulation Elements for the Renovation of High-Rise Apartment Buildings

Prefabricated additional insulation elements have demonstrated success in renovating up to 5-storey apartment buildings. However, the unique challenges posed by high-rise buildings necessitate a closer examination of installation and long-term performance. In this study, we developed an additional insulation element specifically tailored for renovating high-rise apartment buildings and analysed its hygrothermal performance. To test the performance of the insulation elements, we installed a prototype and measured its performance at critical points along the external envelope. We calibrated a calculation model and applied building performance simulation software to explore various combinations of prefabricated elements. Our goal was to compare the associated risks and the key hygrothermal properties of these different material combinations within the insulation element. Critical points between the insulation layer and the wind barrier, as well as between the surface of the existing concrete panel wall and the vapour control layer of the additionally insulated exterior wall were analysed. The study's results indicate that the thermal resistance and water vapour permeability of the wind barrier layer, and the presence of an appropriate vapour control layer primarily influence the performance and moisture dry-out of a structure. Additionally, the study results indicate that the weather component has a higher impact than in lower buildings as the wind-driven rain loads are considerably higher in the upper parts of the high-rise buildings. The initial moisture (w = 110 kg/m3 at the height of the 9th storey and w = 117 kg/m3 at the height of the 16th storey) dry-out can last more than 3 years depending on the building type and materials used. This study underscores the importance of tailored solutions and vigilant moisture safety management in high-rise apartment building renovations, particularly when utilizing prefabricated additional insulation elements.

Assessing Traffic Noise and Its Impact on High-Rise Apartment Buildings Adjacent to an Urban Expressway: A Case Study in Chengdu, China

With rapid urbanization, traffic growth has accelerated in some cities in China. Due to strict urban construction land utilization policies, many high-rise apartment buildings have been constructed adjacent to expressways. To better understand the impact of urban traffic noise on the residents of high residential buildings adjacent to expressways and the differences in noise impacts on different floors, on-site noise monitoring and questionnaires for building residents have been conducted. The characteristics of traffic noise were analyzed based on the measured data, and factors, including time periods and building floors, were considered. According to the results of the questionnaire survey, 56.06% of the male respondents and 54.55% of the female respondents think that the impact of traffic noise on high-rise buildings is “high” or “very high”; 50.53% of the respondents who were in “good” or “very good” condition thought that the traffic noise has a “significant impact” or “very significant impact” on their sleep and daily life. In addition, 25% of respondents living on floors 4–10 and 62.5% of respondents living on floors 11–20 considered the traffic noise to have a “significant impact” or “very significant impact” on their sleep and daily life. The on-site noise monitoring results show that the noise levels (LAeq) outside the windows of the studied buildings remain significantly elevated, with daytime noise on working days ranging from 56 to 70 dB(A), and on weekends ranging from 50 to 65 dB(A). During the four time periods on weekdays from 7 a.m. to 9 a.m., 11 a.m. to 1 p.m., 5 p.m. to 7 p.m., and 10 p.m. to 12 a.m., the average LAeq levels on floors 11–20 are higher than those on floors 4–10 by 4.04 dB(A), 4.92 dB(A), 4.06 dB(A), and 2.67 dB(A), respectively. Similarly, during these time periods on weekends, the levels on floors 11–20 are higher than those on floors 4–10 by 4.96 dB(A), 6.32 dB(A), 5.28 dB(A), and 5.24 dB(A), respectively. This indicates that floors 4–10 of the building experience relatively lower noise levels, while floors 11–20 are subjected to comparatively higher levels of noise disturbance.

Mitigating indoor air pollution in UAE's high-rise apartment buildings: a study on eco-friendly materials and adsorbents

PurposeThis study aims to evaluate the efficiency of various techniques for enhancing indoor air quality (IAQ) in construction. It analyzed the alterations in the concentration of indoor air pollutants over time for each product employed in controlling pollution sources and removing it, which included eco-friendly substances and adsorbents. The study will provide more precise and dependable data on the effectiveness of these control methods, ultimately supporting the creation of more efficient and sustainable approaches for managing indoor air pollution in buildings.Design/methodology/approachThe research investigates the impact of eco-friendly materials and adsorbents on improving indoor air quality (IAQ) in Dubai's tall apartment buildings. Field experiments were conducted in six units of The Gate Tower, comparing the IAQ of three units built with “excellent” grade eco-friendly materials with three built with “good” grade materials. Another experiment evaluated two adsorbent products (H and Z) in the Majestic Tower over six months. Results indicate that “excellent” grade materials significantly reduced toluene emissions. Adsorbent product Z showed promising results in pollutant reduction, but there is concern about the long-term behavior of adsorbed chemicals. The study emphasizes further research on household pollutant management.FindingsThe research studied the effects of eco-friendly materials and adsorbents on indoor air quality in Dubai's new apartments. It found that apartments using “excellent” eco-friendly materials had significantly better air quality, particularly reduced toluene concentrations, compared to those using “good” materials. However, high formaldehyde (HCHO) emissions were observed from wood products. While certain construction materials led to increased ethylbenzene and xylene levels, adsorbent product Z showed promise in reducing pollutants. Yet, there is a potential concern about the long-term rerelease of these trapped chemicals. The study emphasizes the need for ongoing research in indoor pollutant management.Research limitations/implicationsThe research, while extensive, faced limitations in assessing the long-term behavior of adsorbed chemicals, particularly the potential for rereleasing trapped pollutants over time. Despite the study spanning a considerable period, indoor air pollutant concentrations in target households did not stabilize, making it challenging to determine definitive improvement effects and reduction rates among products. Comparisons were primarily relative between target units, and the rapid rise in pollutants during furniture introduction warrants further examination. Consequently, while the research provides essential insights, it underscores the need for more prolonged and comprehensive evaluations to fully understand the materials' and adsorbents' impacts on indoor air quality.Practical implicationsThe research underscores the importance of choosing eco-friendly materials in new apartment constructions for better IAQ. Specifically, using “excellent” graded materials can significantly reduce harmful pollutants like toluene. However, the study also highlights that certain construction activities, such as introducing furniture, can rapidly elevate pollutant levels. Moreover, while adsorbents like product Z showed promise in reducing pollutants, there is potential for adsorbed chemicals to be rereleased over time. For practical implementation, prioritizing higher-grade eco-friendly materials and further investigation into furniture emissions and long-term behavior of adsorbents can lead to healthier indoor environments in newly built apartments.Originality/valueThe research offers a unique empirical assessment of eco-friendly materials' impact on indoor air quality within Dubai's rapidly constructed apartment buildings. Through field experiments, it directly compares different material grades, providing concrete data on pollutant levels in newly built environments. Additionally, it explores the efficacy of specific adsorbents, which is of high value to the construction and public health sectors. The findings shed light on how construction choices can influence indoor air pollution, offering valuable insights to builders, policymakers and residents aiming to promote public health and safety in urban living spaces.

Social impacts of living in high-rise apartment buildings: The effects of buildings and neighborhoods

ABSTRACT Social networks, social cohesion, and place attachment are positive social impacts that can stimulate people’s quality of life. High-rise apartment buildings are often criticized for their negative social impacts, such as social isolation and low levels of interaction and social cohesion. However, there is still insufficient empirical evidence on the relationships between neighborhood social networks, social cohesion, place attachment, and loneliness of high-rise apartment residents and how they are affected by the physical environment and neighborhood satisfaction. This study uses structural equation modeling (SEM) to investigate these relationships using data collected in four high-rise apartment complexes in Hanoi, Vietnam. While the number of neighbors in someone’s social network is found to stimulate social cohesion, which can foster neighborhood attachment and reduce feelings of loneliness, the possibility of improving these social impacts is affected by urban contexts, site properties, and the ability to provide communal spaces within and surrounding the buildings.

Как и почему «человейники» разрушают социальный комфорт мегаполисов?

The problem of construction of residential areas in large Russian cities in the form of so-called ‘human buildings’ in the form of a concentration of high-rise apartment buildings (MKD), which arose several years after the collapse of the USSR in 1991, is becoming more and more aggravated every year. MKDs are often built in violation of current building codes and regulations; almost all new residential complexes lack the necessary social infrastructure (primarily kindergartens, schools, clinics), which, in the absence of sufficient space for residents’ personal cars, creates conditions for uncomfortable living in MKDs. This approach does not correspond to modern ideas about the comfortable life of people in large cities, and it does not take into account such an important factor as internal mass migration (the outflow of residents from the northern and eastern regions of the country).

Crack Damages in Exterior Wall Structures of Korean High-Rise Apartment Buildings Based on Nonlinear Finite Element Analysis

Crack Damages in Exterior Wall Structures of Korean High-Rise Apartment Buildings Based on Nonlinear Finite Element Analysis

Safety and Security of the Environment for Flat Dwellers on the Granting of Building Rights Title (HGB) on Management Rights (HPL) for 80 Years

The development of high-rise apartment buildings is an alternative solution to meet the housing and settlement needs. After the enactment of the Job Creation Law (UUCK), the Government issued Regulation No. 18 of 2021 concerning Management Rights, Land Rights, High-rise Apartment Units, and Land Registration. In this regulation, the period of Building Use Rights (HGB) over Management Rights (HPL) can be granted for 80 (eighty) years for the construction of high-rise apartments. This study was conducted to determine whether granting HGB over HPL for 80 (eighty) years is appropriate to be implemented and whether it potentially threatens the safety and environmental security of the high-rise apartment residents. The study results show that based on the prevailing regulations, granting HGB over HPL for 80 (eighty) years is appropriate because there is periodic inspection of the feasibility of the function every 5 (five) years as a requirement for certificate of feasibility of function (SLF) extension. However, in terms of building reliability, granting HGB over HPL for high-rise apartments for 80 (eighty) years still potentially poses a threat to the safety and environmental security of the residents because the building's capability will decrease in strength that affects the building's reliability. Another risk arises because the sanctions given for the negligence of periodic inspections on the building's reliability in the process of extending SLF are only in the form of administrative sanctions, so more severe sanctions such as criminal sanctions need to be imposed on violators.

Benefits assessment of cool skin and ventilated cavity skin: Saving energy and mitigating heat and grid stress

This study assessed the energy-saving and climate-adaptive potential of cool skin and ventilated cavity skin facade technologies in Seoul's high-rise apartment buildings. We created weather scenarios for historical, mid-term future, and long-term future conditions using Coordinated Regional Downscaling EXperiment (CORDEX) method. Building energy simulations were conducted on a South Korean high-rise apartment model to evaluate their performance under different weather conditions. The results indicate that cool skin and ventilated cavity skin technologies can save cooling energy during summers but lead to heating energy penalties in winters. Ventilated cavity skin outperforms cool skin, offering better cooling energy savings and reduced heating penalties. Combining both technologies yields the highest overall energy savings, with 7 %, 9 %, and 10 % cooling energy savings for cool skin, ventilated cavity skin, and the combined package, respectively. However, cool skin increases heating energy consumption by 5 %, while ventilated cavity skin has minimal impact on heating energy. These envelope technologies also reduce peak electricity demand by at least 5 %, 8 %, and 9 %, respectively. They contribute to heat stress reduction, enhance resilience, and decrease extreme heat risks for occupants during power outages by at least 18 % under various weather conditions. Considering the prevalence of aging high-rise apartments in South Korea, adopting these envelope renovation strategies can effectively reduce cooling loads, enhance thermal comfort, and boost resilience under future climates, while avoiding costly reconstruction.

URBAN DEVELOPMENT AND WASTE MANAGEMENT PLANNING IN KABUL NEW CITY, AFGHANISTAN: A CASE STUDY

The municipal solid waste collection system and services of existing Kabul City are not acceptable socially, economically, and environmentally. This study was carried out in 2020–2021 for the Phase-1 area of Kabul New City (KNC). The study aims to analyze different MSWCSS for the KNC area and choose the best option during the planning stage. The average incremental cost for different collection systems was determined, and the results show that the total annualized cost (AN) of the proposed waste collection system (PWCS) is 855.3699 AFN/tonne, while the total operation and maintenance cost (OP) is 577.1235 AFN/tonne. The AN and OP of the stand-alone underground waste collection system (SAUWCS), tailored collection point system, traditional (prevailed) system, and alley waste collection system (AWCS) are 911.3032 AFN/tonne and 499.9017AFN/tonne, 1,681.762 AFN/tonne and 1,267.28 AFN/tonne, 308.9254 AFN/tonne and 186.3363 AFN/tonne, and 716.7706 AFN/tonne and 410.5375 AFN/tonne, respectively. The social and environmental analysis for the PWCS, SAUWCS, existing system, and AWCS obtained scores of 19, 29, -6, 17, and -5, respectively. From the cost-benefit analysis, it has been proposed that for the PWCS of low-rise residential areas, three wheelie bins of different colors will be provided to each housing unit. The total costs per tonne of solid waste for the PWCS, SAUWCS, TCPS, and traditional system are 2,832.1952, 3,638.137205, 3,888.6272, 751.45984, and 1,975.8152, respectively. For the PWCS of residential areas, chute waste collection systems are planned for high-rise apartment buildings and SAUWCSs are planned in commercial areas.

ASSESSMENT OF THE FIRE RESISTANCE OF BUILDINGS FROM FIREPROOF REINFORCED CONCRETE BUILDING STRUCTURES

The authors conducted an analysis of the current state of evacuation of low-mobility population groups from high-rise residential buildings in the event of a fire. The analysis of the literature made it possible to formulate a number of obstacles to the effective evacuation of people from high-rise residential buildings. Norms in the field of fire safety are not perfect and, as a rule, are aimed at ordinary categories of citizens. The goal of approaches to evacuation calculations is to reduce the time it takes to evacuate residents of a high-rise building in the event of a fire. The authors substantiated the possibility of safe self-evacuation in the event of a fire of the less mobile population groups using fire elevators. Mathematical and graphical calculations of people's evacuation time were carried out using the Pathfinder software complex with the use (without use) of fire elevators. The authors performed a mathematical calculation of the time of evacuation of people and the time of blocking by dangerous factors of fire evacuation routes during a fire in accordance with the methodology of DSTU 8828:2019 Fire safety. Terms. Kyiv: Technical Committee "Fire Safety and Fire Fighting Equipment". To confirm the effectiveness of using fire elevators for the evacuation of people belonging to the M4 population groups with limited mobility (disabled people who move around in wheelchairs), the calculation part was performed. The object of the calculations is a high-rise apartment building on the street. Baidy Vyshnevetskoho, 68 in Cherkasy. The authors determined the dependence of the evacuation time on the movement parameters of people of different mobility groups. The authors compared calculations of evacuation time by stairwell and using fire elevators. Fire elevators are effective when evacuating people from floors for the category of mobility group M4. The researchers proposed management solutions to increase the level of fire safety, ensure the constant readiness and operability of fire elevators for evacuating people with reduced mobility from high-rise residential buildings. Keywords: evacuation routes, evacuation exits, high-rise residential buildings, fire elevators, evacuation time.

Passive Window Energy Performance in Buildings: Modeling of Apartment Buildings in Indonesia

Along with urban growth in urban areas and energy consumption, which continues to increase every year, the selection of windows in the initial design is essential to obtain buildings that are not energy intensive. Selecting the correct window in the blueprint design reduces building energy consumption. Smart windows, especially thermochromic windows, are one of the most promising window technologies because they are the most economical and have passive control with zero energy input, which holds good promise for energy-saving applications. Apart from that, double-glazing windows are also frequently used in energy-saving applications. Therefore, a study compared the energy-saving potential of thermochromic and double-glazing windows to clear glass windows, using computer modeling through EnergyPlus, in high-rise apartment buildings in cities throughout Indonesia's diverse climates. From the modeling results, total energy consumption can be reduced by around 8.91% to 10.96% of total building energy consumption by replacing the conventional clear glass with double-glazing windows or more able to reduce about 20.22% to 24.19% by replacing the conventional clear glass with thermochromic windows. Furthermore, this potential varies depending on geometric shapes, materials, building facades, local climate, and building orientation. Nevertheless, considering the potential benefits, these windows are highly suitable for application in buildings seeking to reduce their energy consumption and improve energy efficiency.

Knowledge, Attitude, And Challenges of High-Rise Building Community Towards Waste Segregation and Recycling Practice in Metropolitan Kuala Lumpur, Malaysia

The increasing population of modern cities contributes to the development of more residential high-rise buildings as well as waste management challenges. Recycling and waste separation can be a challenge in high rise apartment buildings due to the high volume of residents and limited space for waste management. Therefore, the objectives of this study is to investigate the knowledge, attitude, and challenges of high-rise building communities towards waste segregation and recycling. Using cross-sectional analysis, online questionnaires were distributed to target respondents in Sentul Kuala Lumpur. Data were collected from 375 residents of high-rise buildings. The results show that the high-rise community has modest knowledge (57%) and challenges (61%) to practice waste sorting and recycling, however, showed a good attitude (81%) towards it. Waste separation and recycling were influenced by sociodemographic factors of education (p = 0.05), ownership (p = 0.02), marital status (p = 0.01), and floor of living (p = 0.02). There is positive correlation between knowledge an attitude (r = 0.57, p = 0.26), but negative correlation between knowledge and challenges (r = - 0.25, p = 0.0001). The result also indicates that this community lack information and knowledge to practice waste sorting and recycling. Intervention is required to convey the information to these dwellers.

A Study on the Application of Safety Design in High-Rise Apartment Building to Strengthen Cognition

A Study on the Application of Safety Design in High-Rise Apartment Building to Strengthen Cognition

Vertical dispersal of Aedes albopictus within multi-story buildings in downtown Shanghai, China

BackgroundShanghai has numerous high-rise apartment and office buildings, but the effects of these high-rise spaces on the vertical dispersal, oviposition and blood feeding behavior of Aedes albopictus are unknown.MethodsIn six multi-story building blocks in downtown Shanghai, 174 mosq-ovitraps (MOT) were placed both indoors and outdoors for Ae. albopictus collection at different vertical heights from the 1st to 6th floors and a terrace on the 8th floor. Collections were made for 4 months. The human landing catch (HLC) method for Ae. albopictus monitoring was also conducted on 6 consecutive days on six floors of two of the six buildings to study the feeding behavior of Ae. albopictus at different heights.ResultsBoth MOTs and HLCs collected Ae. albopictus at all monitored heights. The vertical distribution, oviposition pattern and biting behavior varied significantly among the seven heights (1st–6th floors and 8th floor) (mosq-ovitrap index (MOI): X2 = 140.616, df = 6, P < 0.001; HLC: F (5, 138) = 15.111, P < 0.001). The MOI at low heights (1st + 2nd floors) was significantly higher than that at medium (3rd + 4th floor, P < 0.001) and high heights (5th + 6th floors, P < 0.001), and there was no significant difference in the MOI for the 3rd–6th floors. The outdoor MOIs were significantly higher than indoor MOIs at all heights (outdoor 23.09% vs. indoor 9.58%, X2 = 74.121, df = 1, P < 0.001). Aedes albopictus HLC density on the ground floor was significantly higher than that on all other heights (5.04 vs. 0.13, 0.29, 0.58, 0.79 and 1.50 per half hour, P < 0.05), while no difference was detected among the heights above the ground floor (P > 0.05).ConclusionsAedes albopictus is more common near the ground level, but it can easily disperse to higher floors in the multi-story buildings of urban Shanghai. No significant differences in Ae. albopictus density were detected within the 3rd–6th floors using MOT or HLC. This suggests that Ae. albopictus might also disperse to areas above the 6th floor and seek hosts there. Aedes albopictus prefers to oviposit outdoors; however, Ae. albopictus was also able to inhabit, oviposit and engage in blood-feeding behavior indoors on different floors. The three-dimensional dispersal pattern of Ae. albopictus in urban areas could facilitate arbovirus transmission and increase the difficulty of dengue control.Graphical abstract

Value activation to increase consumers' intention to purchase green apartments

PurposeThis study examines the motivational forces of self-transcendence and self-enhancement values in consumers' green apartment purchase intention since the values have been seen as the key determinants of environmental beliefs and concerns that motivate pro-environmental behaviour adoption amongst consumers regardless of external barriers. Additionally, this study identifies the role of environmental content in strengthening the effects of self-transcendence value.Design/methodology/approachSurvey data were collected from 234 residents of three high-rise apartment buildings in Hanoi, Vietnam. Measure reliability and validity were tested by confirmatory factor analysis (CFA) before hierarchical ordinal least squares regression (OLS) was conducted to test the hypotheses.FindingsThe research results reveal a significant positive relationship between self-transcendence value and consumers' green apartment purchase intention. However, environmental problem-related content exposure was found to weaken the effect of self-transcendence value on the purchase intention whilst the effect was reported to be strengthened by pro-environmental action-related content exposure.Originality/valueTheoretically, this study emphasizes the importance of interaction effects between external factors and personal values in explaining consumer's decisions and behaviours. Practically, the research results provide valuable insights for marketers and developers into fostering the adoption of green building apartments amongst consumers.

OTTV'S Assessment on Thermal Performance of High-Rise Apartment Buildings in Penang

This study evaluates the envelope thermal performance of high-rise apartment buildings in Malaysia, which are being largely dominated due to the high economic development and increased population. The evaluation was conducted using the Overall Thermal Transfer Value (OTTV), which is the key tool used in the Green Building Index to assess the Energy Efficiency of buildings. Different high-rise apartment buildings were selected with different architecture styles, to account for several periods of building construction. The OTTV value was calculated for the west-oriented façade of the selected buildings, which is considered as a critical orientation that receives high solar radiation. The results showed that four out of the five investigated buildings achieved the minimum requirements for the OTTV, i.e., less than 50 W/m². The maximum and minimum OTTV values with the buildings’ original design were 82.60 W/m² and 41.54 W/m², respectively. However, one of the buildings achieved a lower OTTV value with the installation of shading devices by the owners, i.e., decreased from 48.39 W/m² to 37.60 W/m². The solar radiation penetration through the fenestration was found to be the major contributor to the total OTTV, while it can be controlled by the shading devices. Besides, using dark paints increased the heat conduction through the opaque walls by more than double compared to light paints. This study shows that some design considerations, such as paint colour, shading devices, and glazing material, can have a great influence on the heat gain in buildings.

High-rise apartment quality evaluation and related demographic factors: lesson from RentSafeTO programme

ABSTRACT With the rapid increase in urbanization and the number of residents living in high-rise apartment buildings, the quality of living environments in terms of the facility, safety and hygiene of high-rise housing has become an important topic. Although numerous studies have investigated occupant satisfaction through subjective assessment, only few studies have used objective assessment methods, such as expert evaluation, to elucidate the quality of high-rise apartments and the related occupancy factors. According to the dataset from Toronto's RentSafeTO programme, which provides the results for 9928 high-rise apartments evaluated using 20 quality indicators, this study conducted a factor analysis and identified two main factors for assessing high-rise housing: building structure and building facilities. Furthermore, this study used multiple regression models and census data to analyse the housing quality at the regional level. The results of social housing and private housing differed. Labour force attributes, education, immigration and ethnic origin significantly affected the quality of private housing. The results provide important directions for the post-occupancy evaluation of high-rise apartments. In addition, demographic factors significantly affected residential quality. This study provides a basis for the government to formulate equal and unbiased support for high-rise building maintenance and management.

Performance evaluation of high-rise apartment building using pushover analysis

Indonesia is a developing country that is experiencing rapid development growth. According to the Central Statistics Agency, in 2020 the population of Indonesia will be 270.20 million people. The increase in population from year-to-year results in increasingly narrow lands for development. Therefore, developers and businesspeople make the best use of this opportunity in the world of construction by carrying out developments, including high-rise apartments. As an earthquake-prone area, the planning process for buildings, especially tall buildings in Indonesia, must be carried out very carefully by considering the strength of the structure against high-intensity earthquake loads. Risk reduction strategies can be implemented through building vulnerability assessment by checking structural performance using pushover analysis. In this study, the performance of a 32-storey apartment building was examined using the pushover analysis method. The resulting calculation is that the performance of the structure is 0.0023 for the lateral direction and 0.0113 for the transverse direction. Through the ATC 40 method it is known that the result of structural performance is Damage Control, where after an earthquake the building is still habitable.

Увеличение этажности жилых зданий как элемент концепции «Компактный город» (на примере Казани)

The concept of “compact city” involves the intensive development of the central and middle zones of large settlements by increasing the efficiency of using the territories that have the greatest value. One of the directions contributing to the implementation of this concept, which consists in the development of the vertical component of the city, increasing the height and number of floors of buildings, is known in geourbanism as “superurbanization”. The increase in the number of floors of buildings is a modern trend in the development of cities in almost all highly urbanized countries. The purpose of this work is a spatiotemporal analysis of changes in the number of floors of residential buildings in the city of Kazan. The authors created a register of housing construction objects in Kazan, built over the period 1860–2016, which contains information about 5317 multi-apartment residential buildings; a thematic map reflecting the distribution of residential buildings in the city of Kazan, depending on the number of floors of these objects, was built. Within the analyzed period, there was a tendency to increase the construction of residential buildings with an increased number of floors, as well as high-rise buildings. The number of high-rise apartment buildings built in 2001–2016 increased especially intensively: their number was 11.4 times higher than the same indicator for 1986–2000. As a rule, spatial differences in the number of floors of residential buildings have a clearly expressed historical conditionality and administrative height regulation: peripheral, relatively young areas (where there is no regulation on building height) are characterized by indicators of the average number of floors of buildings erected there within 12–14 units. High-altitude restrictions during construction in the central, historical part of the city led to lower average number of floors, which is 8 units. This measure is aimed at preserving the unique architectural appearance of historical buildings. The introduction and implementation of the ideas of “vertical” urbanism contribute to the spatial concentration and compact distribution of the activities of the population in the urban space.