High Reusability Research Articles

Heterogeneous Asymmetric Hydrogenation of C═C and C═O Double Bonds

AbstractNowadays, heterogeneous catalysts play a crucial role in the field of asymmetric catalysis to produce enantiopure compounds for various applications. The unique properties of heterogeneous systems, such as high stability, reusability, or ease of separation, allow effective catalysis of asymmetric transformations and their further implementation in industrial processes. In this mini‐review, we address the recent trend in the synthesis of chiral heterogeneous catalysts and their subsequent application in asymmetric hydrogenation reactions. We focus on current advances in asymmetric hydrogenation reactions of C═C and C═O bonds due to their high relevance in the fine chemicals industry. Our main aim is to provide a short overview of this expanding field, its current challenges, and future perspectives.

Magnetic Molecularly Imprinted Polymer Combined with Solid-Phase Extraction for Purification of Schisandra chinensis Lignans

Molecularly imprinted polymers (MIPs) can specifically recognize template molecules in solution with imprinted cavities. Due to their capacity for scalable production, they can be used to isolate target products from natural products for industrial production in the fields of pharmaceuticals and food. In this study, magnetic single-template molecularly imprinted polymers (St-MIPs) instead of magnetic multi-template molecularly imprinted polymers (Mt-MIPs) were prepared by surface imprinting using Schizandrol A as a template molecule and deep eutectic solvent (DES) as a functional monomer, combined with solid-phase extraction (SPE) for the adsorption and separation of Schizandrol A, Schisantherin A, Schizandrin A, and Schizandrin B from Schisandra chinensis (Turcz.) Baill. (S. chinensis) fruits extracts. The synthesized MIPs were characterized by FT-IR, TEM, SEM, TG, XRD and VSM, and their adsorption properties were also evaluated. MIPs can specifically recognize the template molecules with high reusability. The purity of the total S. chinensis lignans after SPE was 74.05%, among which that of Schizandrol A, Schisantherin A, Schizandrin A, and Schizandrin B was 33.38%, 8.69%, 16.33% and 15.67%, respectively. Moreover, the one-step synthesis of carrier was easy to operate. And St-MIPs reduced the production cost compared with Mt-MIPs. This study provides a new idea for natural product separation by molecular imprinting technology (MIT).

PVA/AMPS hydrogels: Promising adsorbents for wastewater treatment with high efficiency and reusability

AbstractA PVAMPS hydrogel was synthesized through chemical cross‐linking and semi‐interpenetration of Poly (vinyl Alcohol) (PVA) and 2‐Acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) with glutaraldehyde in distilled water. Various ratios of PVA/AMPS, namely PVAMPS‐1 (2:1), PVAMPS‐2 (1:1), and PVAMPS‐3 (1:2), were examined to understand their individual impacts on gel formation. The synthesis of hydrogels was confirmed using FT‐IR and solid‐state 13C NMR spectroscopy. The PVAMPS hydrogels demonstrated high efficiency as a selective adsorbent for removing cationic dyes, such as Methylene Blue, Safranine‐O, and Thionine, from aqueous solutions, with over 90% removal of cationic dyes observed within 18 hours. Regeneration and reusability studies revealed that even after four cycles, the adsorption capacity of the PVAMPS hydrogels remained exceptionally high, with removal rates exceeding 90% for Methylene Blue. However, for Safranine‐O and Thionine, the removal rates dropped to 20% and 23%, respectively, after four cycles. These findings underscore the promising potential of PVAMPS hydrogels for the removal of cationic dyes in wastewater treatment.

Pd/UiO‐66(Zr)‐2OH as a High‐Performance Catalyst for Hydrogen‐Enhanced Fenton Oxidation of Trimethoprim

ABSTRACTA novel catalyst material named Pd/UiO‐66(Zr)‐2OH was successfully developed and applied in a hydrogen‐promoted Fenton system for the efficient catalytic oxidation of the widely used antibiotic trimethoprim (TMP). The UiO‐66(Zr)‐2OH, as the carrier of catalyst in this work, was synthesized through a solvothermal method. The Pd0 nanoparticle, as the active center of the catalyst, was loaded onto its surface by the “ship‐in‐a‐bottle” strategy. The results showed that the composite Pd/UiO‐66(Zr)‐2OH demonstrated excellent catalytic performance during the reaction, achieving over 97% of TMP removal efficiency within 180 min under optimal conditions under the condition of only trace of iron without adding H2O2. This may be attributed to the fact that the [H], as a clean and efficient reducing agent, can be utilized to accelerate the regeneration of Fe2+ in the Fenton reaction, as well as in the in‐situ regeneration of H2O2. The key parameters affecting the removal efficiency of TMP, including the initial pH and concentration of Fe2+, the dosage of the synthesized material, the flow rate of H2 and the stirring speed were investigated systematically. The Pd/UiO‐66(Zr)‐2OH exhibited high stability and reusability, maintaining over 82% of its initial degradation efficiency of TMP after six reaction cycles. The mechanistic insight revealed that the system primarily relied on the generation of hydroxyl radical (·OH) and singlet oxygen (1O2) for the degradation of TMP, which was verified through quenching experiments and electron spin resonance (ESR). The degradation pathway of TMP was elucidated by analyzing intermediates and the reduction in total organic carbon (TOC). This research offers novel conceptual insights into the evolution and application of advanced oxidation technologies, efficient degradation of emerging pollutants, and expansion of pathways for hydrogen resource utilization.

Hydrodeoxygenation of Isoeugenol-Derived Model Compound over Carbon-Supported Pt and Pt-SnS Catalysts for the Production of Sustainable Jet Fuel.

This study focuses on the sustainable production of bio-jet fuel through the catalytic hydrodeoxygenation (HDO) of isoeugenol (IE). Sucrose-based activated carbon supported bimetallic Platinum-Tin metal sulphides (PtO-SnS/AC) catalyst was prepared for HDO process. Physicochemical properties of catalysts with different spraying synthesis methods (in situ and ex situ metal doping) and Pt loading (0.1-1.0 %) were further investigated. The PtO-SnS/AC catalysts were characterised using various techniques such as X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), field-emission scanning electron microscopy (FESEM) and thermogravimetric analysis (TGA). Both HRTEM and FESEM results show the successful preparation of a spherical nanoparticles doped over activated carbon, and Pt was dispersed on the outer shell of the particles. The catalytic HDO of IE was evaluated in a batch system and showed a high yield and conversion as follows: IE conversion of 100 %, liquid-phase mass balance of 95.92 %, dihydroeugenol (DH) conversion of 99.32 %, propylcyclohexane (PCH) yield of 88.94 % and 2-methoxy-4-propylcyclohexanol (HYD) yield of 76.19 %. Moreover, the PtO-SnS/AC catalyst exhibited high reusability with low metal leaching and high coke resistance for 10 cycles. The catalyst was evaluated in a continuous flow reactor for 100 h at different reaction temperatures, and interestingly, the catalyst showed low deactivation with a high half-time.

High Stability and Reusability of Papain Immobilized on the Non‐Toxic Magnetic Dialdehyde Starch Nanoparticles

AbstractPapain is widely used in food, drug, and bioactive peptide production and must be immobilized onto carriers with biocompatibility. Dialdehyde starch (DAS) can be a good biocompatible cross‐linker according to its active aldehyde groups. In the present study, the magnetic nanoparticles dialdehyde starch (MDASN), synthesized by DAS and Fe3O4 magnetic nanoparticles (Fe‐MNP), are successfully used to immobilize papain to improve the enzymic activity. The structure and morphology of DAS, MDASN, and immobilized papain onto magnetic dialdehyde starch nanoparticles (papain‐MDASN) are characterized detailly. The morphology of DAS is like a flat ball, and that of Fe‐MNP and papain‐MDASN are spherical and clumpy. The particle size of Fe‐MNP and papain‐MDASN are small, resulting in a large surface electrostatic effect and partial agglomeration. Enzymic activity studies of papain‐MDASN exhibit that the immobilized papain on MDASN represents better temperature resistance, alkaline resistance, thermal stability, and reusability, and its activity recovery is up to 68.21%. Papain onto magnetic dialdehyde starch nanoparticles (MDASN) may enhance its potential application in production processes.

Fabrication and characterization of hierarchically macroporous Al2O3 ceramic supported ZnO/ZnS photocatalyst

Hierarchically macroporous Al2O3 ceramic carriers were prepared by direct-foaming combined gel-freezing method. ZnO/ZnS photocatalyst was loaded on the porous carrier through hydrothermal method. The effects of solid content, polyvinyl alcohol content, stirring speed, and sintering temperature on the pore structure, porosity, and compressive strength of the porous carrier were investigated. The pore forming mechanism was also studied. The morphology of ZnO/ZnS photocatalyst was adjusted by changing the pH value during hydrothermal process. The results show that the porous ceramic contains four different sizes of pores, spherical pore, through pore, unidirectional pore, and interstitial pore. The pore structure and strength can be regulated through optimizing process parameters. The porosity and compressive strength of porous carrier prepared with 1.2 % PVA content, 22 % solid content, 1500 r/min stirring speed and 1500 °C sintering temperature are 89.4 % and 1.45 MPa, respectively, which is suitable to be used as the photocatalyst carrier. When the pH value is 10, the size and distribution of ZnO/ZnS photocatalyst are matched with the pore structure of porous carrier. The supported ZnO/ZnS has high photocatalytic activity and good reusability.

Efficient synthesis of novel phenanthroline-dimedone derivatives using Pd@HQBI-SPION as a versatile palladium-immobilized catalyst

This paper presents the synthesis and application of a novel catalyst for carbon–carbon bond formations, comprising palladium immobilized on 2-(5-hydroxyquinolin-8-yl)-1H-benzo[d]imidazole-5-carboxylic acid modified superparamagnetic iron oxide nanoparticles (Pd@HQBI-SPION). The synthesis involved the attachment of HQBI ligands to SPION using APTES, followed by the immobilization of palladium. Characterization techniques, including FTIR, TEM, and magnetic measurements, confirmed the successful synthesis and structural integrity of Pd@HQBI-SPION. The catalytic activity of Pd@HQBI-SPION was evaluated in various carbon–carbon bond formation reactions, demonstrating high efficiency and reusability. 8 different derivatives bearing several electron withdrawing and electron donating functionalities were used as starting materials and the products were obtained in high isolated yields (75–97%). The catalyst exhibited excellent performance in one-pot synthesis of phenanthroline-dimedone polycyclic derivatives via C-alkylation followed by intramolecular O-alkylation of phenanthroline with dimedone. The products are obtained in high to excellent yields is described. This protocol presents a highly selective synthetic method for the construction of polycyclic aromatic compounds containing nitrogen and oxygen atoms.

Integrated Application of Innovative Technologies for Oil Spill Remediation in Gran Tarajal Harbor: A Scientific Approach

This study examines recovery efforts at Gran Tarajal Harbor following a significant oil spill, employing a combination of innovative technologies tailored to enhance oil spill remediation. Cleanup operations incorporated advanced absorbent sponges with high reusability, absorbent granulates for targeted hydrocarbon capture, bioremediation techniques using allochthonous microorganisms to accelerate natural degradation processes, and the integration of newly designed oil containment barriers coupled with sponges. These technologies were instrumental in effectively mitigating environmental damage, as evidenced by a reduction in hydrocarbon concentrations in sediments from nearly 60,000 mg/kg to under 1600 mg/kg within seven months. Notably, advanced absorbent sponges demonstrated superior capacity for repeated use, optimizing the cleanup process and contributing to the sustainability of the response efforts. The most important finding of this research is the demonstrated efficacy of integrated approach in not only reducing hydrocarbon contamination but also in promoting ecological recovery. Heavy metal analyses revealed that lead and copper concentrations were primarily associated with routine port activities, while mercury levels, attributed to the spill, decreased significantly over time. Tissue analysis of local organisms showed minimal contamination, and assessments of biological communities indicated signs of ecological recovery. This work highlights the necessity of introduce new disruptive technologies in contingency plans.

Hierarchical core-shell ZIF-11@ZIF-8 composite nanocatalyst for high-yield simultaneous transesterification-esterifications of sunflower oil to produce biodiesel

Decreasing the mass transfer resistance is a promising technique to prepare an efficient catalyst for improving biomass macromolecules conversion in biodiesel production. In this study, hierarchical core–shell composite nanocatalysts were prepared through a solvothermal technique using zeolitic imidazolate framework-8 (ZIF-8) and ZIF-11 metal–organic frameworks (MOFs). The nanocatalysts were characterized by XRD, FT-IR, BET, FE-SEM, EDS, XPS, TEM, NH3-TPD, and CO2-TPD analyses. The results showed high crystallinity, high surface area (1446.86 m2/g), high pore volume (0.65 cm3 g−1), and mesoscale pore size (2.37 nm). Furthermore, TEM images confirmed the formation of core–shell structure for the composites. The catalytic activity was evaluated in the transesterification of sunflower oil at different operating conditions. The highest biodiesel yield (96.4 %) and full free fatty acid (FFA) conversion were obtained over the ZIF-11@ZIF-8 nanocatalyst at the optimum operating conditions: 120 °C, catalyst concentration of 8 wt%, methanol to oil ratio of 40:1, and 10 h. The ZIF-11@ZIF-8 nanocatalyst showed high thermal and chemical stability after several sequence cycles, leading to high reusability.

Palladium immobilized on functionalized halloysite: A robust catalyst for ligand free Suzuki–Miyaura cross coupling and synthesis of pyrano[2,3-c]pyrazole motifs via four component cascade reaction and their in-silico antitubercular screening

This research introduces a novel organically functionalized halloysite-supported palladium catalyst, HMF-EDA-TMS@HAL-Pd(II) that was synthesized and thoroughly characterized using various analytical techniques like HR-TEM, FEG-SEM, EDX, XPS, FTIR, XRD, TGA, ICP-AES, EXAFS and DFT studies. The catalyst exhibited exceptional performance in Suzuki–Miyaura cross coupling reactions, demonstrating high efficiency and reusability up to seven cycles in aqueous ethanol medium. Motivated by its promising catalytic activity, we extended our investigation to explore its applicability in the synthesis of pyrano[2,3-c]pyrazole motifs via a four-component cascade reaction affording the desired products in good to excellent yields with broad substrate scope under green reaction conditions. In-silico antitubercular screening of pyrano[2,3-c]pyrazole motifs against DprE1 enzyme have shown promising results with inhibition constants ranging between 0.030 and 0.1 μM for compounds 5b, 5k and 5 l. This protocol has the advantages of wide substrate scope, high yield, excellent functional group tolerance, high efficiency and environmental benign procedure. These findings emphasized the catalyst's versatility and potential in diverse organic transformations, highlighting its importance in advancing sustainable synthetic methodologies.

Fabrication of a high-sensitivity electrochemical immunosensor by the oriented immobilization of engineered nanobody on nanofibrous membrane.

Anew type of label-free electrochemical immunosensor for the high-sensitivity determination of parathion was developed based on the oriented immobilization of nanobody (VHH9) on agold nanoparticle-loaded polyvinyl alcohol/citric acid nanofiber membrane-modified electrode. The morphology characterization and assembly process of the modified materials were investigated using scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). Under the optimum conditions, the label-free electrochemical immunosensor for parathion exhibited a linear range of 0.0015-6400ng/mL and a low detection limit of 0.48pg/mL, the signal response of which was 10 times higher than that of the randomly immobilized VHH9. The immunosensor possessed high selectivity, good repeatability and reusability (keeping above 90% of its initial activity after repeating 8 times), and stability (remaining 90% after 9weeks of storage). Finally, the average recoveries of parathion from food samples were 93.76-105.73% with the coefficient of variation being 2.65-6.85%, showing good correlation with UPLC (R2 = 0.9950). Therefore, our nanobody immobilization protocol is simple and effective and proves the potential to be utilized as a promising candidate for sensing platform.

Enhanced Photodegradation of Imidacloprid Using ZnO@Ca‐Alginate Composites: Optimization of pH and pHzcp for Effective Water Treatment

AbstractThis research focused on the photodegradation of the insecticide imidacloprid (IM) via a ZnO@Ca‐Alginate composite catalyst to address water contamination issues, particularly in agricultural areas such as Palestine. The composite was synthesized and characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), energy dispersive X‐ray (EDX), thermogravimetric analysis (TGA), and Fourier transform infrared (FT‐IR) spectroscopy, confirming the presence of ZnO. Photocatalytic experiments under simulated solar light revealed significant IM degradation, with a 50 % reduction in 40 minutes, an 80 % reduction in 2 hours, and up to 94 % in 3 hours. The degradation efficiency was influenced by the point of zero charge (pHzcp) and solution pH, with optimal performance under neutral to slightly basic conditions. UV‐visible spectrophotometry, high‐performance liquid chromatography (HPLC), and total organic carbon (TOC) analyses verified complete IM mineralization, yielding CO₂, Cl−, and NO₃− after 3 hours. The ZnO@Ca‐Alginate composite demonstrated high reusability, highlighting its potential for treating pesticide‐contaminated water. This study emphasizes the need for efficient pollutant removal technologies in regions where agricultural pollutants are prevalent.

Efficient ibuprofen removal using enzymatic activated ZIF-8-PVDF membranes

This study investigated the development of poly(vinylidene fluoride) (PVDF) hybrid ultrafiltration membranes, where ZIF-8 nanocrystals are synthesized in situ within the membrane pores. These ZIF-8 embedded membranes are specifically designed for the treatment of emerging pollutants, such as ibuprofen. The optimized membrane, characterized by a higher concentration of ZIF-8 and greater surface coverage, exhibited significantly enhanced performance and improved properties, including increased hydrophobicity and mechanical strength. By increasing the zinc concentration from 0.2 to 0.3 M during the preparation of the ZIF-8 coated membrane, hydrophobicity was enhanced, as indicated by an increase in the contact angle from 60.3° to 87.2°, along with improved porosity from 41.3% to 60.5%. Further performance enhancements were achieved by encapsulating enzymes, specifically laccase and peroxidase, within the ZIF-8 coated membrane. A comparison of ibuprofen removal by these enzymes showed that peroxidase was slightly more effective, reaching a maximum removal efficiency of approximately 45% within 2 h. The biocatalytic membranes demonstrated a high stability and reusability, underscoring their potential for efficient ibuprofen removal. These findings highlight the efficacy of ZIF-8-coated PVDF membranes as advanced tools for water purification, offering significant improvements in both purification efficiency and membrane stability.

Strain and External Electric Field Engineering of S-Terminated MXene on Selective and Sensitive Detection of N-Containing Compound Gases: A Computational Study.

Gas sensors are used for monitoring hazardous gases and vapors. With the emergence of S-terminated MXene synthesis, herein, we explore the sensing ability of Ti3C2S2 toward N-containing gases, including NH3, NO, NO2, trimethylamine (TMA), and nicotine (NT), using first-principles calculations and a statistical thermodynamic model. We find that Ti3C2S2 exhibits high selectivity to TMA, NO, and NT with moderate adsorption energies of -0.610, -0.490, and -0.476 eV, respectively, minimizing environmental noise from ambient gases. The electronic structure of Ti3C2S2 subtly alters upon adsorption of TMA, NO, and NT, facilitating detectable signals in the sensing device. However, the adsorption of NO2 and NH3 is less pronounced due to weak physisorption (<0.3 eV). Employing engineering strategies including biaxial strain and an external electric field greatly enhances the selectivity and sensitivity of NO2 (NH3) detection by boosting adsorption strength up to -0.351 eV with ε = 5% (-0.370 eV with |E⃗| = 0.6 V/ Å). In addition, the moderate adsorption energies of the gases result in a suitable recovery time in the range of milliseconds, leading to high reusability of the sensing device. The estimated adsorption densities suggest potential coverage of these N-containing molecules even at low concentrations and room temperature. Computational analysis of the sensing capability of Ti3C2S2 using the nonequilibrium Green's function method indicates that it is a promising gas-sensing material. In addition, mechanical modifications, electric field adjustments, and gate voltage alterations could be used to obtain effective sensing materials for N-containing gas detection.

Highly efficient dip catalysts using bacterial cellulose impregnated with self-crosslinked glycol chitosan and silver nanoparticles for 4-nitrophenol reduction

The application of environmentally friendly and sustainable catalysts requires efficient and safe preparation methods using cheap and renewable materials. Although many metal nanoparticles (NPs) have low colloidal stability, they are still very effective as catalysts. Using a straightforward method, we developed a bacterial cellulose–glycol chitosan–silver (BC–GCS–Ag) nanocomposite, by introducing both AgNPs and self-crosslinked GCS within the BC network. Self-crosslinking of GCS occurred during the formation of AgNPs by employing the glycol moieties for reduction to produce aldehyde functionalities, thereby forming Schiff's base bonds within the GCS structure. Using GCS, well-defined AgNPs within the BC matrix. The formation of AgNPs and the self-crosslinking of GCS were characterized using UV–visible spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results showed that spherical AgNPs with a mean diameter of 10 nm exhibited a well-organized structure within the BC–GCS matrix. The BC–GCS–Ag nanocomposite was applied as dip catalyst for the reduction of 4-nitrophenol (4NP) to 4-aminophenol (4AP), chosen as a model reaction. The results showed that the catalytic reaction was completed within 4 min, with high reusability (10 times) and without loss of catalyst. The reaction followed pseudo-first-order kinetics with a high rate constant of 0.582 min−1. Therefore, the BC–GCS–Ag dip catalyst is an attractive alternative for environmentally friendly and sustainable catalysis, owing to its exceptional catalytic performance, high recyclability, and stability, as well as the minimal environmental footprint of the supporting materials.

Fabrication of thiosemicarbazide-modified biochar/carrageenan composite beads based on Eichhornia crassipes for effective removal of Pb (II) from aqueous medium

Several biomasses have been applied as environmentally friendly substitutes to produce biochar, which can be utilized to remediate effluents that contain inorganic chemicals. This study applied water hyacinth (Eichhornia crassipes) as a foundation source for the assembly of thiosemicarbazide-modified biochar (BC), which then was modified with potassium carrageenan (KC). Thiosemicarbazide-modified biochar (BC), potassium carrageenan (KC), and thiosemicarbazide-modified biochar/carrageenan composite beads (BKC) were described by several physicochemical methods. The adsorption of Pb (II) onto the three solid adsorbents was investigated under various experimental conditions. The BKC composite beads revealed a surface area of 687.43 m2/g and a mesoporous structure. The best adsorption conditions were found to be 25 min as an equilibrium time, 1.2 g/L of adsorbent dose, and a solution pH of 5 at a temperature of 15 °C. The pseudo-second-order, Elovich kinetic models, Langmuir, and Temkin isotherms were well familiar to the experimental data, inferring that the progression was physical monolayer adsorption onto the homogenous surface. The highest capacity of Pb (II) adsorption onto BKC was 460.45 mg/g at 15 °C. Thermodynamic measurements proved that adsorption was a spontaneous process and endothermic in the case of BC and BKC while exothermic for KC. Furthermore, BKC showed high reusability conditions.

Advanced CuO-Ag2WO4-Ni nanophotocatalyst in the synthesis of some chromeno[4,3-b]chromenes as effective lung cancer drugs

A novel heterogeneous nanocomposite CuO-Ag2WO4-Ni embedded within a foam matrix has been biosynthesized from Cressa Cretica leaves extract and comprehensively characterized using various techniques, including FT-IR, XRD, EDX, FE-SEM, DRS, TEM, and BET. This innovative nanocomposite demonstrates exceptional photocatalytic efficiency in the synthesis of some chromeno[4,3-b]chromenes, which have shown promise as effective medications in lung cancer treatment. The photocatalytic reactions are facilitated under a green laser light using ethanol as solvent. Compared to individual components of CuO-Ag2WO4-Ni, the nanocomposite exhibited superior performance in terms of light absorption, surface tunability, charge carrier generation, and stability. Noteworthy advantages of this nanocomposite include high reusability and ease of separation from the reaction mixture, thereby ensuring strong reproducibility. The foam structure plays a pivotal role in enhancing photocatalytic activity due to its high surface area and distinctive morphology. Mechanistic studies indicate that the generated holes and electrons effectively drive selective oxidation and reduction reactions, providing a reliable method for synthesizing a range of chromenes. The CuO-Ag2WO4-Ni exhibited remarkable stability across multiple catalytic cycles, with minimal morphological degradation and low leaching of the catalytic species, ensuring long-term effectiveness and cost efficiency for industrial applications. At the final part of this study, the MTT experiment was planned to investigate cytotoxicity of CuO-Ag2WO4-Ni on A549 lung cancer cells. This study affirmed that the performed nanomaterial has effective toxicity agaings the selected cell line.

Transesterification of waste cooking oil for biodiesel production using alkaline-modified graphitic carbon nitride heterogeneous catalyst

ABSTRACT Developing efficient, stable, cost-effective, and environmentally benign heterogeneous catalysts for transesterification is highly required for sustainable biodiesel production. The present study explores the biodiesel production from waste cooking oil (WCO) using graphitic carbon nitride (g-C3N4) and its alkaline-modified nanocatalyst. The catalysts were characterised by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy Dispersive X-ray spectroscopy (EDS), and Fourier transform infrared spectroscopy (FTIR). From the XRD analysis, crystalline sizes of g-C3N4 and alkaline g-C3N4 were found to be 26 and 29 nm, respectively. Transesterification of WCO was carried out at 60 °C for a reaction time of 2 h using 2 wt.% of g-C3N4 and alkaline g-C3N4. Transesterification reaction catalysed by alkaline-modified g-C3N4 was found with a higher yield of biodiesel (89%) than the biodiesel yield (78%) with transesterification reaction catalysed by g-C3N4. The recyclability of both catalysts was also evaluated by reusing them for up to the 5th cycle. The obtained biodiesel was analyzed by using FTIR and GC-MS. The synthesised biodiesel was found to have significant level of monounsaturated fatty acids and saturated fatty acids, which make it usefuel for use as fuel. Some physicochemical properties of the obtained biodiesel were also calculated and found appropriate as per the American Society for Testing and Materials (ASTM) standards. With high reusability and good catalytic activity, the synthesised alkaline-modified g-C3N4 can be employed as a viable option for biodiesel production from WCO.

A novel metal-free nanomaterial P-CN/BC/NCDs preparation and its performance of photocatalytic degradation

The development of photocatalysts with high charge separation and migration efficiencies for environmental remediation using sunlight had been a research priority. In this study, a ternary composite photocatalyst, P-CN/BC/NCDs, was successfully synthesized by thermal condensation and hydrothermal methods, incorporating graphitic carbon nitride (P-CN), biochar (BC), and nitrogen-doped carbon quantum dots (NCDs). Alizarin red S (ARS) was selected as the model pollutant to evaluate the photocatalytic degradation performance. P-CN/BC/NCDs exhibited enhanced photocatalytic degradation performance under visible light irradiation, with a 4.5-fold improvement compared to P-CN alone. The optimally NCDs-loaded P-CN/BC nanocomposites exhibited high visible light absorption and high specific surface area. The increased photocatalytic activity was further confirmed by the increase in photocurrent intensity and the decrease in fluorescence intensity and resistance. XPS and FT-IR tests showed that NCDs, as co-catalysts of P-CN/BC, effectively promoted charge separation through ether bonds and electrostatic interactions. It was experimentally verified by free radical trapping experiments and EPR tests that •O2− was the primary active species in the photocatalytic process, while •OH served as an auxiliary site during the degradation process. Cyclic experiments demonstrated high reusability and excellent stability, with an activity exceeding 93.8 %. Decomposition intermediates and reaction pathways were identified by liquid-quality analysis. Photocatalyst pervasiveness was evaluated by using different pollutants including methyl orange (MO), rhodamine B (Rh B) under similar conditions. This design concept of functional synergistic modification of P-CN materials holds promise for application in various fields.