High-resolution X-ray Diffractometer Research Articles

Iridium nanoparticles supported on polyaniline nanotubes for peroxidase mimicking towards total antioxidant capacity assay of fruits and vegetables

In this study, a straightforward approach is presented for the first time to anchor Ir nanoparticles on the surface of uniform polyaniline (PANi) nanotubes (NTs), which can be used as an efficient peroxidase (POD)-like catalyst. The morphology and chemical structure of the PANi-Ir nanocomposite are characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffractometer (XRD), Raman and X-ray photoelectron spectroscopy (XPS) measurements. Owing to the strong interaction between Ir nanoparticles and PANi, a remarkable catalytic enhancement is achieved compared to the bare Ir black catalyst and individual PANi NTs, dominating withan electron transfer mechanism. Furthermore, an efficient colorimetric sensor for ascorbic acid (AA) is developed with a low detection limit of 1.0 μM (S/N = 3), and a total antioxidant capacity (TAC) sensing platform is also constructed for the rigorous detection and analysis of fruits and vegetables.

Effect of ambient argon pressure on the structural, optical and electrical properties of non-crystalline Se85Te3Bi12 nano-thin films

In this research work, we have synthesized non-crystalline Se85Te3Bi12 chalcogenide glasses by conventional melt quenching technique. The differential scanning calorimetry measurement of the synthesized specimen was done to confirm the glassy as well as non-crystalline nature of the bulk Se85Te3Bi12 alloy. The nano-thin films of thickness 30 nm of the synthesized sample at two different ambient argon pressures (1 Torr and 3 Torr) were made using the physical vapor condensation technique at a constant substrate temperature of 77 K using liquid nitrogen. The non-appearance of prominent peaks in the high-resolution x-ray diffractometer profile confirmed the non-crystalline nature of synthesized nano-thin films. The morphological analysis of the prepared nano-thin films using Field emission scanning electron microscopy confirmed the nanochalcogenide having particle size ranges from 30–90 nm. The Fourier transform infrared (FTIR) spectroscopy suggests the presence of moisture and carbon impurities in the prepared nano-thin films. The broad optical transmission shadow observed in the FTIR results is an essential requirement for new-generation IR systems. Based on UV-visible spectroscopy, optical parameters such as optical absorption coefficients, Urbach energy, optical band gaps, Tauc’s parameter and extinction coefficients were measured for synthesized Se85Te3Bi12 nano-thin films. The value of absorption coefficients, Tauc’s parameters, optical band gap and extinction coefficients increases with the increase of ambient argon pressure. The outcome of these studies recommends that these materials can be a preeminent candidate for photovoltaic applications. Photoluminescence spectroscopy results are accredited to the accumulation of non-crystalline nanochalcogenide particles on the substrates. DC conductivity measurements further confirm the semiconducting nature of the nanochalcogenide Se85Te3Bi12 thin films.

An analysis of microstructural morphology, surface topography, surface integrity, recast layer, and machining performance of graphene nanosheets on Inconel 718 superalloy: Investigating the impact on EDM characteristics, surface characterizations, and optimization

Inconel 718 finds extensive applications in the aviation and aerospace industries, particularly in the manufacturing of jet engines and high-speed airframe components like fasteners, bolts, buckets, instrumentation parts, wheels, and spacers. It is also utilised in the production of cryogenic tankage and gas turbine blades. The present study focuses on investigating the machining performance of graphene nanosheets on Inconel 718. Various aspects of Inconel 718's machinability through electrical discharge machining (EDM) have been examined, including material removal rate (MRR), surface roughness, surface morphology, tool rear Rate (TWR), residual stresses on the machined surface, Vickers hardness, and recast layer thickness. The investigation reveals a significant impact of process parameters on these machining characteristics. The effects of graphene nanosheets have been observed using several analytical instruments such as field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), particle size analyzer, and X-ray diffraction (XRD). Furthermore, optimization of the response data with respect to input parameters has been performed in this study. TEM analysis is used to determine the size of individual debris particles in deionised water and mixed graphene nanosheet dielectric mediums. To verify that the debris particles are the same as the parent material, energy dispersive X-ray spectroscopy (EDX) is used. To determine the compounds and crystal structures present in the base metal and machined surfaces, XRD analysis is used. A high-resolution X-ray diffractometer (HRXRD) is used to measure the residual stresses on the machined surface. EDX composition testing is used to analyze surface modification. Due to the rapid heating and quenching that takes place in the dielectric medium, the machined surface becomes harder. Deposited materials, microholes, and surface textures can all be observed through FESEM microstructure observation. Comparing conventional EDM to nanosheets mixed dielectric, the thickness of the recast layer is reduced. To recapitulate, the study explores how various machining parameters and dielectric mediums affect EDM processes. It examines debris particle size, compound formation, residual stresses, surface modification, hardness, microstructure, and recast layer thickness. The addition of graphene nanosheets to the dielectric medium produces promising results, reducing the thickness of the recast layer and improving surface quality. The results offer suggestions for improving Inconel 718 material surface properties and EDM machining effectiveness.

Nitrogen-Doped Graphene Quantum Dot-Passivated δ-Phase CsPbI3: A Water-Stable Photocatalytic Adjuvant to Degrade Rhodamine B.

Inorganic halide perovskite CsPbI3 is highly promising in the photocatalytic field for its strong absorption of UV and visible light. Among the crystal phases of CsPbI3, the δ-phase as the most aqueous stability; however, directly using it in water is still not applicable, thus limiting its dye photodegradation applications in aqueous solutions. Via adopting nitrogen-doped graphene quantum dots (NGQDs) as surfactants to prepare δ-phase CsPbI3 nanocrystals, we obtained a water-stable material, NGQDs-CsPbI3. Such a material can be well dispersed in water for a month without obvious deterioration. High-resolution transmission electron microscopy and X-ray diffractometer characterizations showed that NGQDs-CsPbI3 is also a δ-phase CsPbI3 after NGQD coating. The ultraviolet-visible absorption spectra indicated that compared to δ-CsPbI3, NGQDs-CsPbI3 has an obvious absorption enhancement of visible light, especially near the wavelength around 521 nm. The good dispersity and improved visible-light absorption of NGQDs-CsPbI3 benefit their aqueous photocatalytic applications. NGQDs-CsPbI3 alone can photodegrade 67% rhodamine B (RhB) in water, while after compositing with TiO2, NGQDs-CsPbI3/TiO2 exhibits excellent visible-light photocatalytic ability, namely, it photodegraded 96% RhB in 4 h. The strong absorption of NGQDs-CsPbI3 in the visible region and effective transfer of photogenerated carriers from NGQDs-CsPbI3 to TiO2 play the key roles in dye photodegradation. We highlight NGQDs-CsPbI3 as a water-stable halide perovskite material and effective photocatalytic adjuvant.

High-temperature graphitization characteristics of vitrinite and inertinite

In order to explore the graphitization characteristic differences between vitrinite and inertinite in coal, this study conducted high-temperature thermal simulation experiments (at five temperature points: 1800°C, 2100°C, 2400°C, 2700°C, and 3000°C) using inertinite-rich and vitrinite-rich samples as graphitization precursors. The quantitative comparison for the evolution characteristics of their graphite lattice was carried out using high-resolution transmission electron microscopy (HRTEM), X-ray diffractometer (XRD), and Raman spectroscopy (Raman) techniques. HRTEM revealed that an evident increase in carbon layer numbers and degree of extension was observed with increasing treatment temperature, XRD showed the variation of lattice parameters (d002/La/Lc) with temperature, Raman data revealed the variation of lattice defects (R2/R3) with temperature. It was discussed about the differences of graphite lattice construction processes between inertinite and vitrinite, throughout the entire temperature range of the experiment, the d002 spacing of inertinite was always smaller than that of vitrinite, indicating a higher degree of graphitization. vitrinite exhibited a uniform and smooth evolution state throughout the entire heating process, while inertinite exhibited an “inert” state between 1800°C and 2100°C (d002 values stagnated near at 0.3440 nm). With increasing simulated temperature, the defect level (R2 and R3) of vitrinite rapidly decreased below that of inertinite, throughout the entire temperature range, vitrinite demonstrated superior defect healing ability in terms of both rate and capability compared to inertinite. Under high-temperature thermal simulation, the three-dimensional lattice construction and defect elimination of vitrinite exhibited synchronous evolution characteristics. On the other hand, the formation of the graphite lattice in inertinite showed an evolutionary trend of “first three-dimensional lattice construction, followed by gradual defect elimination”.

Investigation on high-strength low alloy 0.35Cr-1.9Ni-0.55Mo steel deposited on 20Cr substrate by wire and arc-based directed energy deposition

This article aims to observe the microstructure, mechanical properties, and interface bonding of a 0.35Cr-1.9Ni-0.55Mo alloy deposited on 20Cr steel by wire and arc-based directed energy deposition (WA-DED). For this purpose, different characterization techniques such as optical microscope, scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), and high-resolution X-ray diffractometer were used to analyze microstructure, chemical composition, and phases of the deposited material. Microhardness and tensile tests were also carried out. The results show that the microstructure of the deposited material is relatively homogeneous with a slight increase in grain size from the bottom to the top of the deposited part, thus resulting in a gradually decreasing trend in microhardness, from 288±16.78 HV0.1 (in the bottom) to 256±17.04 HV0.1 (in the top). The heat-affected zone (HAZ) is the hardest (301±2.70 HV0.1), while the substrate has the lowest microhardness (203±17.64 HV0.1). The tensile strengths of deposited materials are relatively isotropic in both the horizontal direction (HD) and vertical (VD) direction: UTSVD = 1013±9.29 MPa, USTHD = 985±24.58 MPa, YS(0.2%)VD = 570±4.51 MPa, and YS(0.2%)HD = 614±19.66 MPa. The tensile strengths of interface specimens are also comparable to those of the substrate materials (e.g., 951 vs. 972 MPa in UTS), indicating an excellent metallurgical bonding between the deposited and substrate materials. The results of this work confirm the efficiency of WA-DED technique to produce high-quality components in industry

Dislocation reduction mechanism os GaN films on vicinal sapphire substrates

<sec>GaN materials are widely used in optoelectronic devices, high-power devices and high-frequency microwave devices because of their excellent characteristics, such as wide frequency band, high breakdown electric field, high thermal conductivity, and direct band gap. Owing to the large lattice mismatch and thermal mismatch brought by the heterogeneous epitaxy of GaN material, the GaN epitaxial layer will produce a great many dislocations in the growth process, resulting in the poor crystal quality of GaN material and the difficulty in further improving the device performance. Therefore, researchers have proposed the use of vicinal substrate to reduce the dislocation density of GaN material, but the dislocation annihilation mechanism in GaN film on vicinal substrate has not been sufficiently studied. Therefore, in this paper, GaN thin films are grown on vicinal sapphire substrates at different angles by using metal organic chemical vapor deposition technique. Atomic force microscope, high resolution X-ray diffractometer, photoluminescence testing, and transmission electron microscopy are used to analyze in detail the effects of vicinal substrates on GaN materials. The use of vicinal substrates can significantly reduce the dislocation density of GaN materials, but lead to degradation of their surface morphology morphologies. And the larger the substrate vicinal angle, the lower the dislocation density of the sample is. The dislocation density of the sample with a 5º bevel cut on the substrate is reduced by about one-third compared to that of the sample with a flat substrate. The special dislocation termination on the mitered substrate is observed by transmission electron microscopy, which is one of the main reasons for the reducing the dislocation density on the mitered substrate. The step merging on the vicinal sapphire substrate surface leads to both transverse growth and longitudinal growth of GaN in the growth process. The transverse growth region blocks the dislocations, resulting in an abrupt interruption of the dislocations during propagation, which in turn reduces the dislocation density.</sec><sec>Based on the above phenomena, a model of GaN growth on vicinal substrate is proposed to explain the reason why the quality of GaN crystal can be improved by vicinal substrate.</sec>

The self-annealing phenomenon of electrodeposited nano-twin copper with high defect density.

Electroplated copper was prepared under typical conditions and a high defect density to study the effect of the defects on its self-annealing phenomenon. Two conditions, grain growth and stress relaxation during self-annealing, were analyzed with electron backscattered diffraction and a high-resolution X-ray diffractometer. Abnormal grain growth was observed in both conditions; however, the grown crystal orientation differed. The direction and relative rate at which abnormal grain growth proceeds were specified through textured orientation, and the self-annealing mechanism was studied by observing the residual stress changes over time in the films using the sin2Ψ method.

Valorization of Waste Cooking Oil into Biodiesel via Bacillus stratosphericus Lipase Amine-Functionalized Mesoporous SBA-15 Nanobiocatalyst

In this study, evaporation-induced self-assembly was applied to prepare amine-functionalized nano-silica (NH2-Pr-SBA-15). That was simply used to immobilize Bacillus stratosphericus PSP8 lipase (E–NH2–Pr-SBA-15), producing a nanobiocatalyst with good stability under vigorous shaking and a maximum lipase activity of 45 ± 2 U/mL. High-resolution X-ray diffractometer, Fourier transform infrared spectroscopy, N2 adsorption-desorption, field-emission scanning electron, and high-resolution transmission electron microscopic analyses proved the successful SBA-15 functionalization and enzyme immobilization. Response surface methodology based on a 1/2 fraction-three-levels face center composite design was applied to optimize the biodiesel transesterification process. This expressed efficient percentage conversion (97.85%) and biodiesel yield (97.01%) under relatively mild operating conditions: 3.12 : 1 methanol to oil ratio, 3.08 wt.% E–NH2–Pr-SBA-15 loading, 48.6°C, 3.19 h at a mixing rate of 495.53 rpm. E–NH2–Pr-SBA-15 proved to have a long lifetime, operational stability, and reusability.

Green silver nanoparticles functionalised gelatin nanocomposite film for wound healing: Construction and characterization

Wound dressings have progressed from simple to advance by the interdisciplinary approaches of chemical, materials and biological fields to engineer the functional materials that can improve wound healing by reducing bacterial infections on wound site. In the present study, Praecitrullus fistulosus extract was used for the preparation of silver nanoparticles (Ag NPs) via a green synthesis method for wound healing. The synthesized Ag NPs were characterized via Ultraviolet–Visible (UV–Vis) spectroscopy, High-Resolution X-ray Diffractometer (HRXRD), and High-Resolution Transmission Electron Microscopy (HRTEM). The gelatin-Neem extract-nanocomposite films were prepared by incorporating green Ag NPs via solvent casting method. The physico-chemical, morphological, structural, thermal, and biological properties of the nanocomposite (NCP) films were determined in order to check their efficacy for wound healing applications. The NCP films were showing significantly higher water absorption capacity, folding endurance, and porosity as compared to the control gelatin (GLT) film. The observed pH of the NCP film was found to be 5.9, which is suitable for human skin. Antibacterial activity of the NCP films against gram-negative bacteria (Escherichia coli) was higher compared to GLT film. The surface roughness was found to be 22.7 nm for the NCP film containing Ag NPs. The thermal stability of the GLT film was improved after the incorporation of Ag NPs. The high antimicrobial activity, porosity and improved surface roughness of NCP films would favour the adherence, growth and proliferation of seeded cells that is pre-requisite for ideal dressing materials.

Effects of the upward-increasing gradient magnetic field on soot properties in ethylene inverse diffusion flames with different oxygen concentrations

The effects of the upward-increasing gradient magnetic field on soot properties are experimentally investigated in ethylene inverse diffusion flames with different oxygen concentrations. The soot morphology, nanostructure, graphitization degree, and oxidation reactivity are obtained by high-resolution transmission electron spectroscopy (HRTEM), X-ray diffractometer (XRD), and thermogravimetric analyzer (TGA), respectively. The upward-increasing gradient magnetic field is induced by two Nd-Fe-B permanent magnets with different thicknesses. The results show that the magnetic field influences the soot properties mainly by affecting the distributions of paramagnetic O2 and OH radicals in the flames. The soot samples are more graphitized in the flame with higher O2 concentration, which contains a longer fringe length and smaller fringe tortuosity. Fullerene-like structures are more apparent with increasing oxygen content. The soot fringe length decreases and fringe tortuosity increases when the upward-increasing gradient magnetic field is applied. The application of the magnetic field enhances the soot oxidation reactivity, and it shows the greatest effect on the oxidation reactivity of soot produced in the flame with 21% O2 content.

The influence of TMGa pre-flow time and amount as surfactant on the structural and optical properties of AlN epilayer

AIN is used as a template layer for deep UV (DUV) emitter and detector applications, because of its wide bandgap and high thermal conductivity. In this study, trimethylgallium (TMGa) source is used as surfactant to improve crystal quality and decrease dislocation density (DD) of AlN layers grown on sapphire (Al2O3) substrate surfaces by Metal Organic Vapor Phase Epitaxy (MOVPE) system. TMGa pre-flow time and pre-flow amount that TMGa pre-flow to the nucleation stage are the subjects of two distinct optimization studies. The structural and optical properties of grown AIN are examined by a high resolution X-ray diffractometer (HR-XRD), Raman spectroscopy, and UV–Vis–NIR spectrophotometer, respectively. TMGa pre-flow time and TMGa pre-flow amount determined to obtain high crystal quality AlN epilayers are 2 s and 0.446 × 10−5 mol/min, respectively. HR-XRD investigation of these growths yields FWHM values of 159/2718 arcsec and 201/1550 arcsec for the ω (002) and ω (102) scans, respectively.

Soot formation in n-heptane/air laminar diffusion flames: Effect of toluene addition

The mixture of n-heptane and toluene is regarded as surrogate fuel for diesel. Under the premise of a certain carbon flow rate, the particle size, nanostructure, microcrystalline size and soot deposition morphology of three kinds of fuel laminar diffusion flames were studied by Transmission Electron Microscopy (TEM), High Resolution Transmission Electron Microscopy (HRTEM), X-ray diffractometer (XRD) and Field Emission Scanning Electron Microscopy (FESEM). The three fuels were pure n-heptane (T0), toluene / n-heptane blends with 5 vol% (T5) and 10 vol% (T10) toluene, respectively. Thermophoretic probe sampling and SiC fiber deposition were used to obtain soot samples. The results showed that with the increase of toluene content, the flame height increased and the temperature decreased at the same height. The addition of toluene increased the content of PAHs, which promoted the formation of soot, and increased the number and particle size of soot. At HAB = 30 mm, with the increase of toluene content, the graphitization degree of soot increased, which showed a larger soot fringe length and a smaller fringe tortuosity, and microcrystalline width (La) of soot particles increased gradually. It is worth noting that the size of a new structure in the soot deposition is counted for the first time, and it is found that its size is negatively correlated with the fringe length and microcrystalline width of soot.

Analysis of Iron Anchor Diseases Unearthed from Gudu Ruins in Xianyang City, Shaanxi Province, China

Iron cultural relics are easily affected by environmental factors and can completely rust away. As early as the Qin Dynasty in ancient China, Xianyang Gudu was part of the most important transportation route to the West from ancient Chang’an; research into Xianyang Gudu has provided important information for understanding the historical changes in ancient China, East–West trade, and ancient boating technology. In this research, we use the iron anchors unearthed from the Gudu ruins in Xianyang City, Shaanxi Province, China as the research object; then, we used a scanning electron microscope–energy dispersive spectrometer (SEM-EDS), a high-resolution X-ray diffractometer (XRD), ion chromatography, and other methods to detect the corroded products of the iron anchors, and analyzed the iron anchor diseases in different preservation environments to explore the relationship between iron anchor disease and the preservation environment. This research found that the corroded products of the iron anchors contained the harmful tetragonal lepidocrocite (β-FeOOH) and that a high concentration of salt ions in the river channel accelerated the corrosion of the anchors; this analysis, based on the disease results, can provide a basis for the subsequent scientific restoration of iron anchors.

Investigation of Deterioration for Large Outdoor Iron Statues Relics: A Case Research of Chairman MAO Iron Statue in Qinghai, China

In this study, the Chairman MAO iron statue in Qinghai, China was analyzed via multi-analytical methodology, including polarizing microscope, SEM-EDS, metallographic analysis, high-resolution X-ray diffractometer, ion chromatographic analysis, silver nitrate titration detection in rust samples. The iron cultural relics are affected by factors such as their chemical composition, metallographic structure and surface characteristics, casting process, and natural storage environment. Although the corrosion rate is different, the corrosion is inevitable. With the corroborative evidence derived from the above analyses, it could be determined that the long-term preservation of cast iron statues in outdoor natural environments is prone to oxidation and corrosion, which due to the poor air circulation inside the statue of Chairman Mao Zedong, the humidity is significantly higher than that of the outside. In addition, due to the large temperature difference between day and night in this area, the condensed water is easy to form, causing the inner cavity of the statue and the welding parts to be rusted particularly seriously by the electrochemical corrosion and chemical corrosion. Compared with single chemical corrosion, electrochemical reaction can greatly accelerate the corrosion of iron. This result provided important scientific basis onto the production crafts of the precious casting, and the correlation between environment and deterioration for large outdoor iron relics, contributing to the conservators to make informed decisions on restoration.

Detection and Analysis of Drug Crystals in Medical Transdermal Patches by Using X-ray Diffraction Measurement

The crystallization of active pharmaceutical ingredients (APIs) in matrix-type transdermal patches has implications for the rate of drug absorption through the skin and patch adhesion strength. Therefore, the presence or absence and the degree of API crystallinity must be controlled to guarantee the quality of patches. In this study, the utility of laboratory-level X-ray diffractometers for the detection and analysis of crystalline APIs in transdermal patches was investigated using medical patches of tulobuterol and isosorbide dinitrate. Several matrix-type patches employ a controlled drug delivery system containing intentionally crystallized API. Both benchtop and high-resolution laboratory X-ray diffractometers can detect several characteristic peaks of the APIs in these patches even if the patches are wrapped in an outer bag, although a benchtop model provides peak heights one-seventh to one-fifth that of a high-resolution instrument. An isosorbide dinitrate patch containing an unintentionally crystallized spot was wrapped in an outer bag, followed by measurements using both X-ray diffractometers. For both instruments, several isosorbide dinitrate-derived peaks were detected only at the crystallized spot, although the signal-to-noise ratio was poorer for the benchtop model. These results show that a high-resolution X-ray diffractometer is advantageous for high-detection sensitivity and offers a high degree of freedom of the measurement position on the sample. It was concluded that a laboratory-level high-resolution X-ray diffractometer can be used to examine the crystalline state of APIs in patches inside an unopened outer bag.

Multi-Analytical Research on the Caisson Painting of Dayu Temple in Hancheng, Shaanxi, China

In this research, the caisson painting of Dayu Temple in Hancheng, Shaanxi, China, was analyzed via a multi-analytical methodology, using a pH meter, an ultra-depth-of-field optical microscope, a scanning electron microscope-energy dispersive spectrometer (SEM-EDS), a high-resolution X-ray diffractometer (XRD), a micro-confocal laser Raman spectrometer, a gas chromatography mass spectrometer (GC-MS), and X-ray fluorescence spectroscopy (XRF). With the corroborative evidence derived from the above analyses, it could be determined that the caisson painting of Dayu Temple was painted on bamboo paper and attached to hemlock wood substrate of the Pinaceae Tsuga genus using starch paste, with common colorants such as carbon black, cinnabar mixed with a small amount of red lead, ultramarine, and ultramarine mixed with Paris green, with animal glue having been adopted as a sizing agent. These results provide important scientific data for the production craft of precious caisson paintings, contributing to the revelation of their historic, artistic, and scientific value, and should enable conservators to make informed decisions in restoration.

Effects of pulsed Al injection on InGaN/GaN multi-quantum well structures grown by MOCVD

This work presents the effects of tri-methyl-aluminum (TMAl) injection during the metal-organic chemical vapor deposition growth of InGaN multi-quantum wells (MQWs). Three different MQW structures are grown on c-plane sapphire substrate. The grown structures are analyzed using high-resolution x-ray diffractometer, photoluminescence (PL), electroluminescence (EL) and atomic force microscope (AFM) techniques. It is found that MQW structure without TMAl injection is pseudomorphic at room temperature, with peak emission at ∼434 nm and EL at ∼438.8 nm. For TMAl-injected MQWs, partial relaxation is observed in the reciprocal space map. The multi-peak emission wavelengths in PL and EL are observed for TMAl-injected samples. Interestingly, the emission wavelengths are found to be red-shifted. AFM images of the grown MQW structures with Al injection suggest that the grown MQW layers are in 3D form, indicating the formation of nanostructures due to TMAl injection in the MQW layers.

Effect of aging treatment on evolution of S′ phase in rapid cold punched Al−Cu−Mg alloy

High-resolution transmission electron microscopy (TEM), X-ray diffractometer (XRD), and hardness test were used to study the evolution of long plate-shaped S′ phase in the spray-formed fine-grained Al−Cu−Mg alloy during aging after rapid cold punching deformation. Results show that the long plate-shaped S′ phase in the extruded Al−Cu−Mg alloy undergoes evident distortion, brittle failure, separation and redissolution, during rapid cold punching deformation, leading to the transformation of long plate-shaped S′ phase into short rod or even redissolution and disappearance, causing the matrix to become a supersaturated solid solution. After the aging treatment, the reprecipitation of the phases occurs, and these aging phases are mainly long plate-shaped and granular. The incompletely dissolved S′ phase acts as nucleation core, promoting uphill diffusion of the surrounding solute atoms. The S′ phase gradually grows with increasing the aging time. The completely dissolved S′ phase forms the incoherent equilibrium phase with the matrix to reduce its free energy. After rapid cold punching, the aging response of the deformed Al−Cu−Mg alloy is accelerated, and the hardness of the alloy is substantially increased.

Nickel oxide film with tertiary hierarchical porous structure and high electrochromic performance and stability

The NiO electrochromic (EC) film with hierarchical porous structure was prepared by hydrothermal method and heat treatment. X-ray photoelectron spectroscope (XPS), scanning electron microscope (SEM), high resolution transmission electron microscope (HRTEM) and X-ray diffractometer (XRD) were employed to characterize the morphology, microstructure and component of the obtained films. The EC properties including transmittance, cyclic voltammetry (CV), electrochemical impedance, switch speed and cycle stability were examined. Results show that the NiO film has a tertiary hierarchical porous structure constructed by NiO nanoparticles, nanosheets and laminated thick slices step by step. The mesopores that appear in the nanosheets are formed by the surrounding of nanoparticles. Response times (tc < 3.00 s, and tb is about 0.60 s) are short. The control factors of charge transport changed with EC cycling. The stability of EC properties could be kept from the 1000th cycle to the 25000th cycle. The most noteworthy is that after 40,000 cycles the hierarchical structure did not change significantly. The reason (or mechanism) of the performance was discussed and suggested.