High-resolution Seismic Reflection Surveys Research Articles

Evidence of Active Quaternary Deformation on the Great Valley Fault System near Winters, Northern California

Abstract The Great Valley fault system defines the tectonic boundary between the Coast Ranges and the Central Valley in California, is active throughout the Quaternary, and has been the source of several significant (M > 6) historic earthquakes, including the 1983 M 6.5 Coalinga earthquake and the 1892 Vacaville–Winters earthquake sequence. However, the locations and geometries of individual faults in the Great Valley fault system are poorly constrained, and fault slip rates and paleoearthquake chronology are largely unknown. Here, we report geomorphic and subsurface geophysical evidence of surface-deforming displacement on a strand of the Great Valley fault system west of Winters, California. Detailed geomorphic mapping and a high-resolution seismic reflection and tomography survey along an ∼800 m profile across the Bigelow Hills document a fault, which we call the West Winters strand of the Great Valley fault system, with apparent east side-up displacement of surficial geologic units. These data together suggest that the West Winters strand is active in the latest Quaternary. Together with local reports from the time, this raises the possibility that the West Winters strand may have ruptured and deformed the surface during the 1892 M 6 Vacaville–Winters earthquake sequence. Future earthquakes with vertical displacement on this and Great Valley fault system structures could have significant hazard implications, given the region’s low relief and the presence of major water conveyance infrastructure.

Crustal architecture and structural evolution of a Neoarchean sedimentary basin: geological and geophysical evidence from Metal Earth Chicobi transect in the Abitibi Subprovince, Superior Province, Quebec, Canada

Our understanding of crustal architecture and tectonic evolution has advanced due to integrated geological and geophysical research on Precambrian cratons. However, it is still a heated debate whether Archean crust structure developed by an allochthonous model similar to modern plate tectonics or autochthonous model emphasizing in-situ evolution of supracrustal belts. The < ca. 2696 Ma Chicobi belt is a sedimentary basin in the central Abitibi Subprovince of the Superior Province, and as such provides a unique opportunity to contribute to this debate. It comprises both Porcupine-type turbidite and Timiskaming-type polymictic conglomerate and cross-bedded sandstone, and unconformably overlies ca. 2728–2711 Ma metavolcanic rocks, including the Amos Group to the south. The metasedimentary rocks were deposited after an early (D1 > ca. 2696 Ma) deformation event, which is expressed by internally foliated clasts in conglomerate. The Chicobi belt was regionally folded and cut by shear zones during a second (D2) deformation event, and was re-folded by Z-shaped folds during a third (D3) dextral shearing event. The D2 event is constrained between ca. 2696 Ma, the pre-existing age of detrital zircon in the Scapa Group along strike of the Chicobi belt, and ca. 2681 Ma, the new age of the cross-cutting syenitic Gémini-Saint-Éloi Pluton.New high-resolution seismic reflection and magnetotelluric surveys were conducted along the same transect across the Chicobi belt. The seismic reflection survey imaged subhorizontal to shallowly north-dipping reflective bands at depths of 3–7 km. Regional-scale inversion of new and pre-existing gravity data indicates that these reflective bands are linked to the Beauchamp Fault south of the Amos Group. Magnetotelluric inversion model shows high resistivity (>1000 Ω·m) zones under metasedimentary rocks, as well as a synform defined by low resistivity (10–100 Ω·m) zones, which aligns with folded metavolcanic rocks south of the Chicobi belt.Integration of the geophysical data with surface mapping suggests that the upper-middle crustal architecture of the Chicobi belt is dominated by D2 upright folds overlying a fault zone. We suggest that deformation of the Chicobi belt is dominated by thrusting and folding, a deformation style compatible with allochthonous growth of the Abitibi Subprovince.

High-resolution seismic reflection survey crossing the Insubric Line into the Ivrea-Verbano Zone: Novel approaches for interpreting the seismic response of steeply dipping structures

A high-resolution seismic reflection survey has been conducted across the Insubric Line from the Sesia Zone into the Ivrea-Verbano Zone (IVZ), where a remarkably complete cross-section of lower continental crust is exposed. The survey was carried out in preparation for the DIVE (Drilling the Ivrea-Verbano zonE) project, which was recently approved by the International Continental Scientific Drilling Program (ICDP). DIVE aims to gain new insights into the characteristics of the lower continental crust through targeted drilling, sampling, and borehole logging. A key borehole is planned near the Insubric Line at Balmuccia, where the deepest parts of the lower continental crust are exposed. As such, the primary objective of this seismic survey was to explore whether the sub-vertical structures prevailing at the surface can be expected to continue at depth or whether there are any indications for major flattening or fault-related offsets. Correspondingly, the acquisition and processing of the seismic reflection data were geared towards revealing weak backscattered events from local heterogeneities associated with the prevailing sub-vertical structural grain. The migrated sections, contain coherent backscattered events to a depth of ~1 km, which form numerous short lineaments that seem to align sub-vertically. To substantiate this observation, we have generated synthetic seismic reflection surveys for canonical models of sub-vertical structures associated with Gaussian- and binary-distributed heterogeneities. Both the observed and synthetic seismic data were then subjected to energy-based attribute analysis as well as geostatistical estimations of the structural aspect ratios and the associated dips. The results of these quantitative interpretation approaches are indicative of the overall consistency between the synthetic and the observed seismic data and, hence, support the original qualitative interpretation of the latter in that the sub-vertical structural grain evident at the surface seems to prevail throughout the imaged part of the upper crust.

Time-lapse imaging of CO2 migration within near-surface sediments during a controlled sub-seabed release experiment

The ability to detect and monitor any escape of carbon dioxide (CO2) from sub-seafloor CO2 storage reservoirs is essential for public acceptance of carbon capture and storage (CCS) as a climate change mitigation strategy. Here, we use repeated high-resolution seismic reflection surveys acquired using a chirp profiler mounted on an autonomous underwater vehicle (AUV), to image CO2 gas released into shallow sub-surface sediments above a potential CCS storage site at 120 m water depth in the North Sea. Observations of temporal changes in seismic reflectivity, attenuation, unit thickness and the bulk permeability of sediment were used to develop a four-stage model of the evolution of gas migration in shallow marine sediments: Proto-migration, Immature Migration, Mature Migration, and Pathway Closure. Bubble flow was initially enabled through the propagation of stable fractures but, over time, transitioned to dynamic fractures with an associated step change in permeability. Once the gas injection rate exceeded the rate at which gas could escape the coarser sediments overlying the injection point, gas began to pool along a grain size boundary. This enhanced understanding of the migration of free gas in near-surface sediments will help improve methods of detection and quantification of gas in subsurface marine sediments.

Tectonic evolution in the Early to Middle Pleistocene off the east coast of the Boso Peninsula, Japan

Abstract The Kanto Basin developed, starting c. 3 Ma, influenced by the subduction of the Philippine Sea plate and the Pacific plate. Sediments in this basin have influenced the geomorphology of the Kanto region. In the Boso Peninsula, located at the eastern edge of the Kanto Basin, uplift continues in what is called the Kashima–Boso uplift zone. Although the development of this uplift after the Late Pleistocene is well understood, there are few data from the Early to Middle Pleistocene. In this study, we investigated the offshore shelf area east of the Boso Peninsula using a high-resolution seismic reflection survey, and report new information on the geological structure and uplift processes in the area from the Early to Middle Pleistocene. We identified the Kujukuri-oki anticline and the Kujukuri-oki normal fault zone. The Kujukuri-oki anticline, more than 47 km long, is north–south striking and deforms the Kujukuri-oki Group. There are numerous normal faults with displacements of less than tens of metres spread widely in the survey area (Kujukuri-oki normal fault zone). These findings reveal that the Kujukuri-oki anticline uplifted during the end of the Early Pleistocene and attenuated during the Middle Pleistocene. This anticline comprised the axis of the Kashima–Boso uplift zone at the Boso Peninsula from the Early to Middle Pleistocene and the Boso Peninsula is located at the western limb of this anticline.

Interlobate esker aquifer characterization by high resolution seismic reflection method with landstreamer in SW Finland

The Virttaankangas interlobate esker with 100 m thick sediments has a complex depositional history. It is one of the largest groundwater reserves in Finland and hosts a managed artificial recharge plant providing potable water for the 300,000 inhabitants of the Turku region. We researched the characteristics of the esker aquifer both on a major fracture valley and on an esker ridge with a low groundwater table. This study presents the results of the first landstreamer-based high-resolution seismic reflection survey in Finland conducted in 2011. The esker core (main aquifer) position was delineated accurately throughout the entire area with continuous seismic data compared to a previous sedimentological model, gravimetric data and reference drillings. New features related to the widening of the coarse-grained unit of the esker core as well as a previously unknown daughter esker adjacent to the main esker core were revealed. These new findings are in agreement with the existing 3-D hydrogeological model. Our research provides valuable data on the high-resolution seismic reflection surveying of thick interlobate glaciofluvial deposits on two areas with differing bedrock topography on crystalline basement rocks.

Geologic controls on up-dip and along-strike propagation of slip during subduction zone earthquakes from a high-resolution seismic reflection survey across the northern limit of slip during the 2010 Mw 8.8 Maule earthquake, offshore Chile

Abstract A grid of closely spaced, high-resolution multichannel seismic (MCS) reflection profiles was acquired in May 2012 over the outer accretionary prism up dip from the patch of greatest slip during the 2010 Mw 8.8 Maule earthquake (offshore Chile) to complement a natural-source seismic experiment designed to monitor the post-earthquake response of the outer accretionary prism. We describe the MCS data and discuss the implications for the response of the accretionary prism during the earthquake and for the long-term evolution of the margin. The most notable observation from the seismic reflection survey is a rapid north-to-south shift over a short distance from nearly total frontal accretion of the trench sediments to nearly total underthrusting of undeformed trench sediments that occurs near the northern edge of slip in the 2010 earthquake. Integrating our structural observations with other geological and geophysical observations, we conclude that sediment subduction beneath a shallow décollement is associated with propagation of slip to the trench during great earthquakes in this region. The lack of resolvable compressive deformation in the trench sediment along this segment of the margin indicates that the plate boundary here is very weak, which allowed the outer prism to shift seaward during the earthquake, driven by large slip down dip. The abrupt shift from sediment subduction to frontal accretion indicates a stepdown in the plate boundary fault, similar to the stepovers that commonly arrest slip propagation in strike-slip faults. We do not detect any variation along strike in the thickness or reflective character of the trench sediments adjacent to the change in deformation front structure. This change, however, is correlated with variations in the morphology and structure of the accretionary prism that extend as far as 40 km landward of the deformation front. We speculate that forearc structural heterogeneity is the result of subduction of an anomalously shallow or rough portion of plate that interacted with and deformed the overlying plate and is now deeply buried. This study highlights need for three-dimensional structural images to understand the interaction between geology and slip during subduction zone earthquakes.

North Sea as geo database

A national database of detailed 2D data and 1D ground investigation data is being developed for the Dutch sector of the North Sea. The 2D data mostly comprise interpreted results of high-resolution seismic reflection surveys. The ground investigation data typically comprise cone penetration test (CPT) results, S-wave velocity derived from seismic downhole tests, soil sample descriptions, soil sample classifications and results of geotechnical laboratory tests. The availability of public-domain geodata is rapidly increasing, primarily because of a licensing approach in which the Dutch government provides geotechnical and geological data to tenderers for design and operation of wind farms. The increasing availability of geodata provides new interests and opportunities for the apportioning, development and maintenance of offshore and coastal facilities. This paper describes the contents of the geo database. In addition, it discusses opportunities for testing and validation of new methods for site investigation, as well as integration of geophysical data, CPT results and sample data for state-of-the-art mapping and ground modelling purposes.

Late Glacial and Holocene sedimentary infill of Lake Mondsee (Eastern Alps, Austria) and historical rockfall activity revealed by reflection seismics and sediment core analysis

Abstract Glacigenic perialpine lakes can constitute continuous post-last glacial maximum (LGM) geological archives which allow reconstruction of both lake-specific sedimentological processes and the paleoenvironmental setting of lakes. Lake Mondsee is one among several perialpine lakes in the Salzkammergut, Upper Austria, and has been previously studied in terms of paleoclimate, paleolimnology and (paleo)ecology. However, the full extent and environment of Late Glacial to Holocene sediment deposition had remained unknown, and it was not clear whether previously studied core sections were fully representative of 3D sediment accumulation patterns. In this study, the sedimentary infill of Lake Mondsee was examined via high-resolution seismic reflection survey over a 57-km extent (3.5 kHz pinger source) and a sediment core extracted from the deepest part of the lake, with a continuous length of 13.76 m. In the northern basin, seismic penetration is strongly limited in most areas because of abundant shallow gas (causing acoustic blanking). In the deeper areas, the acoustic signal reaches depths of up to 80 ms TWT (two-way travel time), representing a postglacial sedimentary sequence of at least 60-m thickness. Holocene deposits constitute only the uppermost 11.5 m of the sedimentary succession. Postglacial seismic stratigraphy of Lake Mondsee closely resembles those of well-studied French and Swiss perialpine lakes, with our data showing that most of Lake Mondsee’s sedimentary basin infill was deposited within a short time period (between 19,000 BP and 14,500 BP) after the Traun Glacier retreated from the Mondsee area, indicating an average sedimentation rate of about 1.4 cm/yr. Compared to other perialpine lakes, the seismic data from Lake Mondsee reveal little indication of mass movement activities during the Holocene. One exception, however, is rockfalls that originate from a steep cliff, the Kienbergwand, situated on the southern shore of Lake Mondsee, where, in the adjacent part of the lake, seismic profiles show mass transport deposits (MTDs), which extend approximately 450 m from the shore and are mappable over an area of about 45,300 m2. Sediment cores targeting the MTDs show two separate rockfall events. The older event consists of clast-supported angular dolomitic gravels and sands, showing high amounts of fine fraction. The younger event exhibits dolomitic clasts of up to 1.5 cm in diameter, which is mixed within a lacustrine muddy matrix. Radiocarbon dating and correlations with varve-dated sediment cores hint at respective ages of AD 1484 ± 7 for Event 1 and AD 1639 ± 5 for Event 2. As our data show no evidence of larger-scale mass movements affecting Lake Mondsee and its surroundings, we infer that the current-day morphology of the Kienbergwand is the result of infrequent medium-scale rockfalls.

Three-dimensional hydrostratigraphical modelling of the regional aquifer system of the St. Maurice Delta Complex (St. Lawrence Lowlands, Canada)

In the central part of the St. Lawrence Lowlands (Mauricie, Québec), Late Quaternary deglacial events led to the formation of a series of complex granular aquifers, such as those in the (1) Saint-Narcisse morainic complex, (2) paleodelta formed by the Saint-Maurice River, and (3) sandy littoral terraces left during marine regression. The aquifers are an important supply of potable water for most municipalities in the region, including the City of Trois-Rivières, which is a mid-size city where groundwater accounts for 46% of the water supply. The main objectives of this study were to build a three-dimensional (3D) model of the Quaternary deposits to define the main hydrogeological contexts of the Mauricie region and to characterize the regional aquifers. The compilation of existing hydrogeological data led to the selection of 5386 well logs that contained stratigraphic information of variable quality, ranging from only surficial sediment thickness to descriptions of fully cored boreholes. To supplement the existing data, fieldwork was undertaken in areas where few data were available, including 63 km of high-resolution seismic reflection surveys and 34 new boreholes. The final 3D model consists of six layers, from the bedrock surface to the upper littoral and deltaic sands. The total thickness of the deposits ranges from zero, on bedrock outcrops, to 150 m beneath central Trois-Rivières. Taking into account the thickness of the saturated layer and the porosity of the sand and gravel, the upper unconfined aquifer contains an estimated 364 million m3 of water. The 3D model helped refine the understanding of regional aquifers and was used to identify unexploited aquifers, notably around the Saint-Narcisse morainic complex and along the St. Cuthbert Fault. The model clarified the regional stratigraphic architecture, especially topography of the bedrock surface, the lateral extent of Late Quaternary sands and development of Holocene post-glacial sediment sequences.

High resolution seismic evidence for Ghaggar lineament and paleo-Saraswathi River

Geophysical data are needed to correlate the lineaments at the surface to the structural mapping of underlying bedrock. High resolution seismic survey is one of the most suitable geophysical methods for mapping of shallow features. In this study, 2D high resolution seismic reflection survey (HRSS) has been carried out across the Ghaggar, a seasonal river in Haryana, India. The survey is carried out for a profile distance of 10 km across the lineament along the course of Ghaggar River. Ground checks along the river have shown sediments containing alternate layers of alluvium deposits with yellowish silty clay and fine-grained gray sand of variable thickness. Several structural disturbances along the profile are identified. During the quantitative analyses, the results exhibit disturbances in the reflector representing the bedrock. Also, regional gravity data study does not report any major tectonic feature indicating the absence of seismicity associated with the lineament. The present study resulted in that (a) the1.5-km wide zone of disturbance is more likely to be a fracture rather than a major fault across the basement in the depth and (b) the meandering drainage pattern of the Ghaggar River which indicates that it is a basement-controlled lineament.

Distributed-Temperature-Sensing Using Optical Methods: A First Application in the Offshore Area of Campi Flegrei Caldera (Southern Italy) for Volcano Monitoring

A temperature profile 2400 m along the off-shore active caldera of Campi Flegrei (Gulf of Pozzuoli) was obtained by the installation of a permanent fiber-optic monitoring system within the framework of the Innovative Monitoring for Coastal and Marine Environment (MON.I.C.A) project. The system consists of a submerged, reinforced, multi-fiber cable containing six single-mode telecom grade optical fibers that, exploiting the stimulated Brillouin scattering, provide distributed temperature sensing (DTS) with 1 m of spatial resolution. The obtained data show that the offshore caldera, at least along the monitored profile, has many points of heat discharge associated with fluid emission. A loose association between the temperature profile and the main structural features of the offshore caldera was also evidenced by comparing DTS data with a high-resolution reflection seismic survey. This represents an important advancement in the monitoring of this high-risk volcanic area, since temperature variations are among the precursors of magma migration towards the surface and are also crucial data in the study of caldera dynamics. The adopted system can also be applied to many other calderas which are often partially or largely submerged and hence difficult to monitor.

Subsurface structure of the Inadani fault zone revealed by the high resolution seismic reflection survey in 2008SCAT

Subsurface structure of the Inadani fault zone revealed by the high resolution seismic reflection survey in 2008SCAT

Structural characteristics of the Bayonnaise Knoll caldera as revealed by a high-resolution seismic reflection survey

The Bayonnaise Knoll caldera is a conical silicic caldera located on the eastern part of the back-arc rift zone of the Izu-Ogasawara arc. Many geological and geophysical surveys have shown that the Bayonnaise Knoll caldera contains hydrothermal sulfide deposits. The Japan Agency for Marine-Earth Science and Technology conducted high-resolution multi-channel seismic reflection surveys across the Bayonnaise Knoll caldera to ascertain details of the crustal structure, such as the configuration of faults around the caldera. A reflection profile of excellent quality was obtained by high-density velocity analysis at about 150-m intervals. We applied prestack depth migration by using the results of the high-density velocity analysis and further analyzed this region. The depth-migrated profile shows many faults, which correspond to bathymetric lineations, on the eastern side of the Bayonnaise Knoll caldera. The velocity structure of the Bayonnaise Knoll caldera resembles that of the Myojin Knoll caldera, which has been well surveyed and is associated with the hydrothermal deposit. The depth-migrated profile shows a clear reflective zone that is distributed asymmetrically to the Bayonnaise Knoll caldera center. These data suggest that caldera formation was controlled by back-arc rifting activity in the Izu-Ogasawara arc. The hydrothermal fluid migration path in the Bayonnaise Knoll caldera is estimated to be the result of faulting and magmatic intrusion on the eastern side of the structure. It is assumed that these fluids formed the Kuroko-type sulfide deposit in the eastern part of the caldera structure.

Active faulting at the western tip of the Gulf of Corinth, Greece, from high-resolution seismic data

Abstract The Gulf of Corinth is one of the fastest-spreading intra-continental rifts on Earth. GPS data indicate that the rift is currently opening in a NNE-SSW direction, with a rate of extension reaching up to 16 mm yr− 1 in its westernmost part. Although the rest of the offshore rift has been well studied, the western tip of the rift is still poorly explored. We present an accurate map of submarine faults in this area based on two high-resolution seismic reflection surveys (single-channel sparker). In the eastern part of the studied area, the sedimentary infill is affected by the known North Eratini, South Eratini, and West Channel faults. Further to the west, the seafloor is mostly flat and is bounded to the north by the normal, south-dipping, Trizonia fault. To the north, the shallower part of the Gulf shows to the east a diffuse pattern of normal and strike-slip deformation, which is replaced to the west by a 7.5 km long SE striking strike-slip fault zone, called the Managouli fault zone. To the westernmost tip of the Gulf, in the Nafpaktos Basin, two fault sets with different strikes are encountered; the one with a NE-SW strike exhibits a clear strike-slip component. The western tip of the Gulf of Corinth is the only part of the Corinth Rift where convincing evidence for strike-slip movement has been found. This fault pattern is likely related to the complex deformation occurring at the diffuse junction at the western tip of the Rift between three crustal blocks: Continental Greece, Peloponnese, and the Ionian Island-Akarnania block.

Seismic and core investigation off Panama city, Florida, reveals sand ridge influence on formation of the shoreface ravinement

A high-resolution seismic reflection and vibracore survey was conducted on the inner shelf offshore of Panama City, Florida in April, 2011, to provide seabed characterization for Office of Naval Research acoustic reverberation experiments. The seafloor in this region is part of the MAFLA sand sheet: marine sands up to 5.5m thick extending from Mississippi to the Florida panhandle. The survey area spanned a transition in sand ridge morphology: northwest of the St. Andrews Bay inlet channel, sand ridges are up to ~4m tall, but die off southeast of the inlet channel. Analysis of reflection and core data documents a basal reflector beneath the ridges interpreted to be the shoreface ravinement separating estuarine and Pleistocene sediments below from the marine sands above scavenged from the eroded sediments. In the northwest, this surface truncates buried river channels filled with estuarine sediment. In the middle of the survey area, where sand ridges are ~2m high, the basal reflector is stratigraphically above the channel tops, and the presence of woody fragments in the intervening sand implies that it is relict barrier/estuarine material that has not been reworked into marine sand. In the southeast, where no sand ridges are present, the basal reflector is not observed, but the shoreface ravinement is identified in cores just ~0.4m below the seafloor; unreworked barrier/estuarine sands are up to ~4m thick above the channel tops. The stratigraphic progression implies reduced depth of shoreface erosion to the southeast, correlating with the reduction in sand ridge height. It is hypothesized here that sand ridge migration provides an addition to wave erosion in the formation of the shoreface ravinement along the lower shoreface and inner shelf, eroding through net negative bedform climb, and transferring sand to the sand ridges comprising the modern sand sheet.

Tectonic development of the northeastern Tibetan Plateau as constrained by high-resolution deep seismic-reflection data

A 180-km-long, high-resolution seismic-reflection survey that imaged the entire crust and the uppermost mantle lithosphere was conducted across the northeastern Tibetan Plateau. This work had three aims: (1) to examine whether the left-slip Haiyuan and Tianjing faults defining the margin of NE Tibet are crustal- or lithospheric-scale structures, (2) to determine whether seismic fabrics are consistent with middle- and/or lower-crustal channel flow, and (3) to establish the minimum amount of Cenozoic shortening strain in the region. Analysis of our newly obtained seismic-reflection data suggests that the left-slip Haiyuan and Tianjing faults have multiple strands and cut through the upper and middle crust. The faults likely terminate at a low-angle detachment shear zone in the lower crust, because the flat Moho directly below the projected traces of the faults is continuous. The seismic image displays subvertical zones of highly reflective sequences containing parallel and subhorizontal reflectors that are truncated by seismically transparent regions with irregular shape. The transparent regions in the middle crust are traceable to the seismically transparent lower crust and are interpreted as early Paleozoic plutons emplaced during the construction of the Qilian arc in the region. The presence of the undisturbed subvertical contacts between zones of highly reflective and seismically transparent regions rules out the occurrence of channel flow in the middle crust, as this process would require through-going subhorizontal reflectors bounding the channel above and below. The lack of continuous reflectors longer than a few kilometers in the lower crust makes a laminar mode of channel flow unfavorable, but lateral lower-crustal flow could have occurred via small-scale ductile deformation involving folding (less than a few kilometers in wavelength and amplitude). Integrating surface geology and the seismic data, we find that the upper crust along a segment of the seismic surveying line experienced up to 46% crustal shortening postdating the Cretaceous and is thus interpreted as entirely accumulated in the Cenozoic. If the estimated shortening strain is representative across northeastern Tibet, its magnitude is sufficient to explain the current elevation of the region without an appeal for additional contributing factors such as channel flow and/or a thermal event in the upper mantle.

Impacts of sediment supply and local tectonics on clinoform distribution: the seismic stratigraphy of the mid Pleistocene-Holocene Indus Shelf

We present results from the first high-resolution seismic reflection survey of the inner Western Indus Shelf, and Indus Delta, Arabian Sea. The results show major regional differences in sedimentation across the shelf from east to west, as well as north to south, both since the Last Glacial Maximum (~20 ka) and over longer time scales. We identify 10 major regional reflectors, interpreted as representing sea level lowstands. Strong compressive folding is observed underlying a reflector we have called Horizon 6 in the north-western shelf, probably compression associated with the transpressional deformation of the Murray Ridge plate boundary. Downslope profiles show a series of well developed clinoforms, principally at the shelf edge, indicating significant preservation of large packages of sediment during lowstands. These clinoforms have developed close to zones of deformation, suggesting that subsidence is a factor in controlling sedimentation and consequently erosion of the Indus Shelf. These clinoforms fan out from dome features (tectonic anticlines) mostly located close to the modern shoreline.

Identification of deep subaqueous co-seismic scarps through specific coeval sedimentation in Lesser Antilles: implication for seismic hazard

Abstract. During the GWADASEIS cruise (Lesser Antilles volcanic arc, February–March 2009) a very high resolution (VHR) seismic-reflection survey was performed in order to constrain Late Quaternary to Present faulting. The profiles we obtained evidence frequent "ponding" of reworked sediments in the deepest areas, similar to the deposition of Mediterranean "homogenites". These bodies are acoustically transparent (few ms t.w.t. thick) and are often deposited on the hanging walls of dominantly normal faults, at the base of scarps. Their thickness appears sufficient to compensate (i.e. bury) co-seismic scarps between successive earthquakes, resulting in a flat and horizontal sea floor through time. In a selected area (offshore Montserrat and Nevis islands), piston coring (4 to 7 m long) was dedicated to a sedimentological analysis of the most recent of these particular layers. It corresponds to non-stratified homogenous calcareous silty sand (reworked calcareous plankton and minor volcanoclastics). This layer can be up to 2 m thick, and overlies fine-grained hemipelagites. The upper centimeters of the latter represent the normal RedOx water/sediment interface. 210Pb and 137Cs activities lack in the massive sands, while a normal profile of unsupported 210Pb decrease is observed in the hemipelagite below, together with a 137Cs peak corresponding to the Atmospheric Nuclear Experiments (1962). The RedOx level was thus capped by a recent instantaneous major sedimentary event considered as post-1970 AD; candidate seismic events to explain this sedimentary deposits are either the 16 March 1985 earthquake or the 8 October 1974 one (Mw = 6.3 and Mw = 7.4, respectively). This leads to consider that the syntectonic sedimentation in this area is not continuous but results from accumulation of thick homogenites deposited after the earthquakes (as observed in the following weeks after Haiti January 2010 event, McHugh et al., 2011). The existence of such deposits suggests that, in the area of study, vertical throw likely results from cumulated effects of separated earthquakes rather than from aseismic creep. Examination of VHR profiles shows that all major co-seismic offsets are recorded in the fault growth sequence and that co-seismic offsets can be precisely estimated. By using a sedimentation rate deduced from 210Pb decrease curve (0.5 mm yr−1) and taking into account minor reworking events detected in cores, we show that the Redonda system may have been responsible for five &gt;M6 events during the last 34 000 yr. The approach presented in this work differs from fault activity analyses using displaced sets of isochronous surfaces and postulating co-seismic offsets. Combining VHR seismic imagery and coring we can decipher co-seismic vs. slow continuous displacement, and thus actually estimate the amplitude and the time distribution of major co-seismic offsets.

Seismic results as a-priori knowledge for airborne TEM data inversion — A case study

Abstract We present a case study where a-priori knowledge from high resolution reflection seismic data is used to improve airborne time-domain electromagnetic data inversion. The a-priori knowledge constrains layer boundaries and lateral resistivity change during the inversion process. The object for the case study is the North Sea island Fohr that was affected by several glaciations and inherits a complex Quaternary and Tertiary geology. The freshwater lens and the local geology were investigated by several geophysical surveys. A SkyTEM survey with following laterally constrained inversion provides the resistivity distribution of the island and several 2-D high resolution seismic reflection surveys give structural information. Vertical seismic profiles provide reliable velocity information for time-to-depth-conversion. Seismic horizons and a combined interpretation yield to a-priori constraints for the SkyTEM inversion. We demonstrate how a-priori constraints enhance the inversion to a reliable direction. From the 3-D data cube of 1-D inversion models we extract an example and reinterpret the geophysical results. With the new inversion it is possible to image a till layer with subjacent sand in a larger range than before.