High-resolution 3D Seismic Data Research Articles

Accurate Delimitation of Mine Goaves Using Multi-Attribute Comprehensive Identification and Data Fusion Technologies in 3D Seismic Exploration

Existing goaves (e.g., shafts and roadways) in mines represent important hidden dangers during the production of underlying coal seams. In this view, the accurate identification, analysis, and delimitation of the scope of goaves have become important in the 3D seismic exploration of mines. In particular, an accurate identification of the boundary swing position of goaves for 3D seismic data volumes within a certain depth interval is key and difficult at the same time. Here, a wide-band and wide-azimuth observation system was used to obtain high-resolution 3D seismic data. The complex structure of a mine was analyzed, and a seismic double processing system was applied to verify the fine processing effect of a goaf and improve the resolution of the 3D seismic data. Based on the seismic attribute identification characteristics of the goaf structure, we decided to adopt multi-attribute comprehensive identification and data fusion technologies to accurately determine the position of the goaf and of its boundary. Combining this information with the mine roadway engineering layout, we verified the accurateness and correctness of the goaf boundary location. Our study provides a good example of the accurate identification of the 3D seismic data of a roadway goaf.

Tectonic influence on the evolutionary dynamics of deep-water channel systems along the active accretionary prism margin in the Rakhine Basin, Myanmar: A high-resolution 3d seismic analysis

This study reveals the morphological transformations of a deep-water channel system within the Rakhine Basin in the northeastern Bay of Bengal through a comprehensive analysis of high-resolution 3D seismic data integrated with drilling logs. Employing the “source-channel-sink” paradigm, this investigation examined the impact of various factors, including tectonic transformations, sediment influx, slope dynamics, climatic changes, and relative sea-level fluctuations, on the evolutionary trajectory of these channel systems. Applying precise time-slicing techniques integrating root-mean-square amplitude attributes, coherent amplitude attributes, and horizontal amplitudes on seismic profiles, this investigation recognized three distinct stages in the evolution of channel-levee complexes (CLCs): the Middle Miocene erosional deep-water channel-levee complex (CLC-1), the Pliocene erosional-depositional deep-water channel-levee complex (CLC-2), and the Pleistocene depositional deep-water channel-levee complex (CLC-3). Comparative analysis revealed that the CLC-3 exhibits unique characteristics, including shallower channel depth (D), wider channel width (WC), extensive U-shaped cross-sectional area (S), broader natural levee width (WL) and height (H), and the highest tortuosity coefficient (LC/LS) when contrasted with the other two CLCs. Furthermore, this study substantiated how tectonic processes, primarily the collision between the Indo-Eurasian plates, resulting in the Himalayan and Indo-Burma Range orogenies, have shaped the region's geological and climatic framework, thereby influencing monsoon circulation and precipitation patterns, which in turn augmented detrital material influx into the basin. Moreover, this tectonic collision has led to gradual changes in the slope gradient of the Rakhine Basin and its deep-water areas, impacting internal flow velocities and channel curvature, thus governing deep-water channel systems' development and spatial distribution. Also, episodic sea level fluctuations were identified as significant contributors to sediment transport from shelves to deep-water regions and sediment deposit reworking. Overall, this study underscores the role of tectonic changes after the Eocene in driving the evolutionary dynamics of the deep-water channel system within the Rakhine Basin, Myanmar.

Influence of sedimentary processes and fault tectonics on the evolution of submarine canyons in the East Andaman Basin: Insights from high-resolution seismic data analysis

The Andaman Sea Basin, a well-known back-arc spreading centre and a mature petroliferous basin, presents a unique and complex scenario for understanding the interplay of sedimentary processes and fault tectonics on seafloor geomorphology evolution, particularly in the eastern shelf region. This study, using high-resolution 3D seismic data and published exploratory well-seismic interpretation results, aims to establish a comprehensive stratigraphic framework for the Tanintharyi region, spanning the Lower Miocene, Middle Miocene, Upper Miocene, Pliocene, and Quaternary. A submarine canyon system was identified and investigated along the Tanintharyi continental slope within the East Andaman Basin, comprising thirteen slope-confined canyons arranged predominantly in an east-west vertical slope orientation. By analysing seismic reflection features, five distinct seismic facies have been identified, including basal lag (BL), slump and debris-flow deposits (SDFDs), canyon confined sheets (CCSs), laterally inclined packages (LIPs), and channel-levees (CLs). The evolution of this canyon system, a vital focus of this study, can be categorised into three phases based on the morphology and sedimentary structures observed: canyon initiation, canyon extension, and erosion-sedimentation. The findings of this study highlight the critical controlling role of faults in canyon evolution, with the intensity of fault activity displaying a negative correlation with canyon size, indicating the direct impact of faults on geomorphological changes. In addition, the geomorphological changes induced by fault activity have resulted in changes in sediment supply, dispersal, and sedimentation rates, thus significantly impacting the spatial distribution and dimensions of slope-confined canyons within the East Andaman Basin, with far-reaching implications.

The complex interaction between channel–levee systems and mass transport complexes in the Pliocene–Quaternary Rakhine Basin, offshore Myanmar

Channel–levee systems (CLSs) and mass transport complexes (MTCs) are prevalent in deep-water basins, yet their interplay remains enigmatic. This study uses high-resolution 3D seismic data to investigate the architecture of CLSs and MTCs, aiming to explore how CLSs influence the distribution of MTCs in the Rakhine Basin, Bay of Bengal. Two models are built to illustrate the interaction between CLSs and MTCs. In the first model, large-scale aggradational CLSs created unfilled relief in their overbank environments, which acted as spatially confined topography for subsequent mass-wasting deposits. In this model, the interaction between large-scale CLSs and confined MTCs controls the distribution of confined MTCs. In the second model, laterally migrating CLSs do not create such prominent topographic relief in their overbank environments. This characteristic renders them inconsequential in influencing the distribution of subsequent mass-wasting processes. Consequently, spatially extensive MTCs develop within unconfined settings. This configuration gives rise to lithological traps, which might be common and represent potential drilling targets on continental margins. This study could contribute to a better understanding of the interplay between CLSs and MTCs and have some enlightenment on looking to provide some insight into the search for lithological traps in the Rakhine Basin.

Variability of frontally emergent and confined mass-transport complexes in the Qiongdongnan basin, northern South China sea: New perspectives from 2D and 3D seismic data

The frontal emplacement of the submarine and sublacustrine mass-transport complexes (MTCs) are subdivided into the frontally emergent and confined types. However, it remains unclear what factors control the variability of the frontal emplacement of submarine MTCs. High-resolution 2D and 3D seismic data are utilized to investigate the variability of four MTCs_1–4. The results show that (1) Four MTCs_1–4 herein in the lower slope are subdivided into frontally emergent MTCs_1 and 2 and frontally confined MTCs_3 and 4 (2) The magnitude (e.g., length, width, area and volume); of (frontally) emergent MTCs_1 and 2 is larger than that of confined MTCs_3 and 4; (3) Their flow directions and sources are variable; (4) Height drop (HD) and depth of the basal shear surface (DB) of emergent and confined MTCs_1–4 are greatly variable. Their HDs and DBs as controlling factors present/determine their gravitational potential energy, and HD/DB ratio controls their emplacement type (frontal emergence or confinement). High gravitational potential energy (mainly determined by high HD) of the sliding mass enables landslides to ramp out on the coeval seafloor, resulting in the creation of the gentle and/or moderate fontal ramps. Low potential energy (mainly presented by large DB) of the sliding mass prevents landslides from overrunning the undeformed downslope strata, forming the steep frontal ramps. Scales of sedimentation accumulation rate, slope gradient and earthquakes as possible triggering factors affect variability of MTCs_1–4. The sources of emergent MTCs_1 and 2 are from the continental margin slope. Confined MTC_3 comes from the upper slope of the northern flank of the Xisha uplift and confined MTC_4 derives from a point source (local lower slope). The variability of their gravitational potential energy, mainly depending on variable HDs and DBs, predominantly determines the emplacement variability of submarine MTCs and eventually affects their variable evolutions. This study provides new perspectives and enriches the repository of frontally confined and emergent (submarine) MTCs.

Research on fault-controlled hydrocarbon accumulation in rifted lacustrine basins based on structural geological modeling: a case study of the Banqiao area in Bohai Bay Basin, China

The Banqiao area in the Bohai Bay Basin has experienced three stages of extensional deformation, leading to the formation of numerous fault-bound traps. Faults, acting as boundary conditions for these traps, play a crucial role in hydrocarbon accumulation. In this study, we conducted a 3D structural modeling of the area using high-resolution 3D seismic data and established a fault-reservoir database based on previous research. Our findings reveal four levels of faults in the Banqiao area: basin-controlling faults, boundary faults, derivative master faults, and secondary adjusting faults. The structural units can be categorized into subsag areas, slope areas, stress tran-sition zones, bifurcation and main incised fault zones, and southern block areas. The segmented growth of the main boundary faults controls the evolution of the subsags, with the subsidence center gradually shifting eastward from Rift Phase I to Rift Phase II, aligning with the distribution of source rocks. Fault-bound traps in the Banqiao area include single faults, intersecting faults, and side faults. Faults primarily act as barriers to lateral hydrocarbon migration during the process of hydrocarbon accumulation, while also providing pathways to a lesser extent. By integrating the fault-reservoir database with the fault system classification, we identified four types of fault-controlled hydro-carbon accumulation models: like-dipping fault barrier model, oppositely-dipping fault barrier model, intersecting fault barrier model, and reactivation-controlled secondary hydrocarbon ac-cumulation model. This structural geological model effectively demonstrates the spatial configura-tion of faults and their role in hydrocarbon accumulation in the Banqiao area. The fault control mechanisms presented in the model can also be applied to other blocks in the Bohai Bay Basin, laying a foundation for future petroleum exploration in continental rifted basins and facilitating the ap-plication of big data algorithms in various geoscientific research fields.

Gravity tectonics controls on reservoir-scale sandbodies: Insights from 3D seismic geomorphology of the canyons buried in the upper slope of the Eastern Niger delta basin

High-resolution 3D seismic data analysis was integrated with a calibrated well and biostratigraphy data to present the first overview of a buried Pleistocene canyon system on the upper slope of the eastern Niger Delta, the Galabor Canyon. Attribute maps of specific horizons allow documenting the changing morphologies and infill lithologies of two main branches of the canyon through two stages of activity separated by a reference horizon dated at 0.99 Ma based on well calibration. At the upper slope, growth faults dissect the canyon heads, the catchment of which encroaches a network of valleys incised on the outer shelf. The canyon fill is composed of muddy channels and mass-transport deposits, largely derived from the collapse of canyon walls and sand-rich bodies forming a tract sourced by shelf-edge deltas at the outlet of the incised valleys. High-density turbiditic processes likely control the distribution of sand bodies along the canyon, ranging from tributary fans on the upper slope to 6 km-wide meander belts on the middle slope. The sandy deposits accumulate in minibasins formed along the canyon path, downstream of the subsiding hanging wall of the growth faults and upstream of shale ridges that damp the flow in the canyon. These results show that canyons can be major targets for sand reservoir exploration on the upper slope of large muddy deltas.

The infill of tunnel valleys in the central North Sea: Implications for sedimentary processes, geohazards, and ice-sheet dynamics

Tunnel valleys are widespread in formerly glaciated regions such as the North Sea and record sediment transport beneath ice sheets undergoing deglaciation. However, their complex infill architecture often makes their implications for ice-sheet processes difficult to unravel. Here, we use high resolution 3D (HR3D) seismic-reflection data, improved-resolution conventional 3D seismic-reflection data, and geotechnical information from industry-acquired boreholes to image the infill architecture of buried Quaternary tunnel valleys in the North Sea in unprecedented detail. Ten cross-cutting generations of tunnel valleys are mapped beneath the seafloor of the North Sea where only seven were visible previously. Each generation of tunnel valleys potentially reflects a different glaciation, although our evidence may imply that it is possible to rapidly erode and infill multiple generations of tunnel valleys within a single glacial cycle. The infill of the oldest tunnel valley generations reflects sedimentation during relatively gradual ice-sheet retreat, with occasional episodes of overriding by re-advancing grounded ice. Tunnel valleys formed in more recent glaciations are characterised by more variable sedimentation patterns that reflect dynamic fluctuations of the ice margin, including readvances and stagnation, during valley filling and ice retreat. Numerous subglacial landforms are also imaged within the tunnel valleys; these sometimes contain shallow gas accumulations that represent geohazards for seafloor infrastructure installations. In addition, we document examples where salt diapirism has caused fluids to migrate upwards from depth through faults and into the near-surface tunnel valleys. In instances where this occurs, the relatively porous and often highly continuous subglacial landforms present within their infill may allow these fluids to spread laterally for kilometres or even escape from the seafloor; it is therefore important to consider tunnel valleys when monitoring possible CO2 leakage from carbon capture and storage efforts.

Three-dimensional seismic evidence for depositional undulations nucleated around pre-existing relief, South China Sea

Sediment undulations are widely distributed along continental shelf and slope worldwide. The driving mechanisms of undulations are crucial for assessing the long-term stability of continental slope, which, however, remain poorly understood. We used high-resolution 3D seismic data to investigate the internal architecture and origin of a field of seafloor and subsurface undulations along the slope of South China Sea (SCS). The undulations have narrow troughs and broad ridges. The reflection geometries in the troughs between undulations tend to be continuous and not offset by faults. These troughs terminate at different subsurface depths, commonly ranging from 50 to 400 ms in two-way travel time (TWTT) below the seafloor, often at locations related to subsurface geological structures, such as buried faults and steps within mass transport deposits (MTDs). These subsurface terminations therefore suggest that the undulations are probably depositional features not linked to creep-related basal detachment. The troughs between undulations display an absence of growth features, while the undulations increase in amplitude from base to top (characteristics that are also incompatible with gravitational deformation). Erosional and depositional features are commonly found in the undulations; thus, we interpret the narrow troughs between undulations to represent the areas where sediment-laden bottom currents undergo passage from supercritical to subcritical conditions. These troughs nucleated mostly from fault scarps and seafloor steps induced by past slope failures. Previous alternative interpretations report that these features originate from subsurface creep; alternatively, the present interpretation as sediment transport structures has significant implications for seafloor management and engineering projects.

The Impact of Pre-Existing Faults on Fault Geometry during Multiphase Rifts: The Jiyang Depression, Eastern China

The combination of multi-phase extension and pre-existing fault reactivation results in a complex fault pattern within hydrocarbon-bearing basins, affecting hydrocarbon exploration at different stages. We used high-resolution 3D seismic data and well data to reveal the impact of multi-phase extension and pre-existing fault reactivation on Cenozoic fault pattern changes over time in the Jiyang Depression of eastern China. The results show that during the Paleocene, a portion of NW-striking pre-existing faults reactivated under NS extension and controlled the basin structure (type 1). Other parts of the NW-striking pre-existing faults stopped activity and served as weak surfaces, and a series of NNE-striking faults were distributed in an en-echelon pattern along the NW direction at shallow depths (type 2). In areas unaffected by pre-existing faults, NE-striking faults formed perpendicular to regional stresses. During the Eocene, the regional stresses shifted clockwise to near-NS extension, and many EW-striking faults developed within the basin. The NE-striking faults and the EW-striking faults were hard-linked, forming the ENE-striking curved faults that controlled the structure in the basin (type 3). The NNE-striking faults were distinctly strike-slip at this time, with the ENE-striking faults forming a horsetail pattern at their tails. Many ENE-striking faults perpendicular to the extension direction were formed in areas where the basement was more stable and pre-existing faults were not developed (type 4). There were also developing NS-striking faults that were small in scale and appeared in positions overlapping different main faults (type 5). Additionally, different fault patterns can guide different phases of hydrocarbon exploration. Type 1, type 2, and type 3 faults are particularly suitable for early-stage exploration. In contrast, type 4 and type 5 faults are more appropriate for mature exploration areas, where they may reveal smaller hydrocarbon reservoirs.

Post-rift magma plumbing system in the northern Great South Basin, New Zealand

Late Cretaceous magmatism has been widely documented in the Great South Basin (GSB) of New Zealand, which is mainly relevant to the Gondwana break-up (105–83 Ma) and the separation of Zealandia from Australia and Antarctica (83–66 Ma). However, the magma plumbing system in the GSB is still poorly understood. In this study, we used a high-resolution 3D seismic reflection data to investigate the igneous intrusions that developed in the northern part of GSB. These igneous intrusions occurred from ∼75 Ma to ∼58 Ma that corresponded to the spreading of the Tasman Sea and the Southern Ocean. Most of the igneous intrusions developed above listric faults which formed during rifting stage. Moreover, dykes are also observed between the listric faults and igneous intrusions. Listric faults, dykes and sills formed the magma plumbing system of GSB. This study explored the possible origin of post-rift magmatism in the GSB, and addressed the post-rift magma plumbing system in detail, which greatly promoted the understanding of GSB’ evolution, resource exploration and marine geological hazard assessment.

Multiple sediment source infill in a low-accommodation basin: implications for the late Paleozoic sediment routing system in the southeastern Ordos Basin

AbstractLate Paleozoic strata in the southeastern Ordos Basin comprise targeted reservoirs for tight gas exploration. As a typical intracratonic basin, the Ordos Basin is characterized by low-accommodation space and a complex sediment infilling process, which attracts much attention. During the early Permian, the southeast area was fed by sediments from multiple sediment sources, which makes it difficult to identify the pinch-out of the sand bodies and reconstruct the sediment routing system. In this study, we reconstruct the paleo-topography of the late Paleozoic setting using high-resolution 2D and 3D seismic data. Thus, we identify two types of topography: the eastern block is presented as a semiclosed depression, and the western block is observed as a flat platform. Based on detrital zircon U–Pb data and heavy mineral assemblages, we reconstruct the provenance area and show that early Permian sediments originate from the northern margin of the Ordos Basin and from the northern Qinling orogenic belt in the south. By integrating the trace element contents, carbon and oxygen isotope data and sedimentary structure from core samples, we can observe the paleoenvironment and the corresponding facies associations in these blocks. The eastern block was infilled by a prograding delta; the western block was infilled by a tide-dominated delta or a wavy-dominated delta. By using stratigraphic forward modelling, we find that most sediments in the semiclosed setting are progradational and intensely interacted. In contrast, the sediments in the western block present an open setting, infilled and gently interacted. The fine-grained deposits were not easily preserved due to tidal or wave reworking processes in the shallow-water marine setting, and they were transported into deep-water areas. Furthermore, to explore the dominant factors in a pattern of fluvial–deltaic sand bodies formed in the low-accommodation basin, we rebuild the sediment routing system parameters and plot them on a bubble chart. According to the fitness between the depositional volume and the above parameters, we determine the key factors in the routing systems that formed. The results show that the sediment supply has a high relevance to the depositional volume in a semiclosed setting, such as the eastern block, while the terrain height may drive sedimentation in an open marine setting, such as the western block. We demonstrate that two different infill patterns and different sand-body stacking patterns with multiple sediment sources in a low-accommodation basin may serve as a model for similar settings.

Sand-rich Pleistocene deep-water channels and their implications for gas hydrate accumulation: Evidence from the Qiongdongnan Basin, northern South China Sea

Deep-water turbidite channels are conduits for transporting terrigenous clastic sediments into the ocean, and channel deposits can also act as high-quality hydrocarbon reservoirs. In this study, based on high-resolution 3D seismic data and logging-while-drilling data, four Pleistocene turbidite channels are identified and characterized in the deep-water area. These deep-water channels are sinuous with V- or U-shaped on the seismic profiles, and their evolutionary history can be divided into Unit 1 (Erosion-dominated stage), Unit 2 (Erosion-Deposition stage), Unit 3 (Erosion-Deposition stage), and Unit 3 (MTDs-dominated stage). The internal fillings of these channels are almost basal lags with high-amplitude reflections at the bottom, pelagic sediments with low-amplitude reflections, and mass transport deposits with translucent/transparent seismic facies. Since sand-rich sediments dominate the deep-water channel-levee systems in Unit 3 in the study area, they could act as shallow gas reservoirs and facilitate the accumulation of gas hydrates. By analyzing the source-to-sink systems around the basin, the source of the sediments within the deep-water channels is discussed, which are mainly from the Truong Son Belt. Floods, sea level fluctuations, and earthquakes are the most likely triggering mechanisms of turbidity currents in the Qiongdongnan Basin. This study provides new insights into the Quaternary deep-water sedimentary process, gas hydrate exploration, and source-to-sink systems in the northwestern South China Sea.

Sedimentary deformation relating to episodic seepage in the last 1.2 million years: a multi-scale seismic study from the Vestnesa Ridge, eastern Fram Strait

Seafloor hydrocarbon seepage is a natural fluid release process that occurs worldwide on continental shelves, slopes, and in deep oceanic basins. The Vestnesa sedimentary ridge in the eastern Fram Strait hosts a deep-water gas hydrate system that became charged with hydrocarbons ∼2.7 Ma and has experienced episodic seepage along the entire ridge until a few thousand years ago, when seepage activity apparently ceased in the west but persisted in the east. Although it has been documented that faults and fractures play a key role in feeding the seeps with thermogenic gases, the mechanisms controlling seepage periodicity remain poorly understood. Here we integrate high-resolution P-cable 3D seismic and Chirp data to investigate the spatial and temporal evolution of high-resolution fractures and fluid flow features in the west of the Vestnesa Ridge. We characterize sediment deformation using a fracture density seismic attribute workflow revealing two highly deformed stratigraphic intervals and associated small-scale pockmarks (<20 m diameter). Chronostratigraphic constraints from the region show that these two highly deformed intervals are influenced by at least three major climatic and oceanic events during the last 1.2 million years: the Mid-Pleistocene Transition (∼1.25–0.7 Ma), the penultimate deglaciation (∼130 ka) and the last deglaciation (Heinrich Stadial 1: ∼16 ka). These periods of deformation appear associated with seismic anomalies potentially correlated with buried methane-derived authigenic carbonate and have been sensitive to shifts in the boundary of the free gas-gas hydrate interface. Our results show shifts (up to ∼30 m) in the depth of the base of the gas hydrate stability zone (GHSZ) associated with major changes in ocean bottom water temperatures. This ocean-driven effect on the base of the GHSZ since the Last Glacial Maximum coincides with the already highly deformed Mid-Pleistocene Transition sedimentary interval and likely enhanced deformation and gas leakage along the ridge. Our results have implications for understanding how glacial cycles impact fracture formation and associated seepage activity.

Machine learning elucidates the anatomy of buried carbonate reef from seismic reflection data

A carbonate build-up or reef is a thick carbonate deposit consisting of mainly skeletal remains of organisms that can be large enough to develop a favourable topography. Delineation of such geologic features provides important input in understanding the basin's evolution and petroleum prospects. Here, we introduce a new attribute called the Reef Cube (RC) meta-attribute that has been computed by fusing several other seismic attributes that are characteristics of the reef through a supervised machine-learning algorithm. The neural learning resulted in a minimum nRMS error of 0.28 and 0.30 and a misclassification percentage of 1.13% and 1.06% for the train and test data sets. The Reef Cube meta-attribute has efficiently captured the anatomy of carbonate reef buried at ∼450 m below the seafloor from high-resolution 3D seismic data in the NW shelf of Australia. The novel approach not only picks up the subsurface architecture of the carbonate reef accurately but also accelerates the process of interpretation with a much-reduced intervention of human analysts. This can be efficiently suited for delimiting any subsurface geologic feature from a large volume of surface seismic data.

Analyzing the Formation and Evolution of Strike-Slip Faults and Their Controlling Effects on Hydrocarbon Migration and Charging: A Case Study of Tahe Area, Tarim Basin

The Ordovician strike-slip faults system in the Tahe area of the Tarim Basin provides an important opportunity for using 3D seismic data to document the structural characteristics, formation, and evolution of strike-slip faults and their relationship with oil and gas. With high-resolution 3D seismic data, the strike-slip faults are interpreted, classified, and described using the seismic coherence technique. The geometric characteristics, active periods, formation, and evolution process of strike-slip faults are analyzed, and the relationship between strike-slip faults and hydrocarbon accumulation and charging is discussed in this research project. On the map, the primary strike-slip faults on the east and west sides of the Tahe area are relatively sheared to each other, showing an “X” type conjugate fault, and the secondary strike-slip faults are scattered. In the cross-section, the primary strike-slip faults are inserted downward into the Cambrian basement and up to Devonian, and “Single line”, “Y”, “Flower”, and “Parallel lines” structures are observed. Bounded by the top of Ordovician, the deep and shallow parts are vertically segmented, with different structure styles. The switch of the structural style of strike-slip faults is attributed to principal stress. A deep “positive flower” shape of faults was developed in the mid-Ordovician period under the effect of compressive stress. Meanwhile, a shallow “negative flower” shape of faults was developed from the late Ordovician to the mid-Devonian period under tensile stress. The “Compound Flower” shape of deep “positive flower” shape and shallow “negative flower” shape formed by compressive and tensile activities has a wider fracture range, which leads to deep fluid migration and shallow karstification. There are two combinations of deep Ordovician strike-slip faults in the section: “Lower single branch-upper flower type” and “lower single branch-upper single branch type”. The primary faults of the former insertion into the Cambrian basement are associated with homologous secondary faults, while the latter has no derived secondary faults. It has an important impact on reservoir reconstruction and distribution, and the reservoir is controlled by faults. Strike-slip faults not only control the channel of oil and gas migration, but also the horizontal and vertical distribution of oil and gas. The closer the carbonate reservoir is to the primary fault, the more likely it is to form a high yield area. There are four types of oil and gas charging models controlled by strike-slip faults. In the area where the structure is high and the strike-slip faults are sheared relatively to each other, the larger the scale of faults, the more conducive it would be to oil and gas migration and accumulation. Among them, the charging model related to the primary fault has higher oil and gas migration efficiency. This research contributes to analyzing the relationship between strike-slip faults and oil and gas as well as playing a significant role in applications of oil and gas exploration in practical works.

Submarine landslide and associated polygonal faults development: a case study from offshore Norway

Submarine slide and polygonal faults have been investigated using high-resolution 3D seismic data, over an area of 2,300 km2. The study area is located on the continental slope, offshore Norway. Submarine sliding covers more than half of the study area, and is part of the Storage slide. The slide developed a series of extensional faults at the upper extensional zone which is gradually changed to chaos seismic facies, interpreted as mass transport deposits. There is no clear evidence of compression/contractional zone downslope. Polygonal faults are highly developed in the KS1 and KS2 interval, corresponding to the Lower Miocene age. The fault has small offset of c. 10÷30 ms TWT, spacing ranges between c. 500 m and 1 km. Within this faulted interval, faults tend to develop intensively below the submarine sliding and much less out of that area. Bright amplitude anomalies are observed within the north south – elongated anticline structure. It has been mapped over an area of c. 135 km2 coinciding with the top anticline. Among those, there are two obvious negatives, bright amplitude reflectors which are relatively flat at 2670 ms TWT (flat spot 1) and 2800 ms TWT (flat spot 2). These flat spots are interpreted as hydrocarbon-brine contacts. Flat spot 2 is bounded by the structure contour but there is no evidence for the unconformable with the lithologic reflections from the trap boundary, thus this still needs to be confirmed by well data. Bright amplitude anomalies suggest the existence of hydrocarbon in the trap, in addition, the occurrence of polygonal faults is linked to seal potential covering the underneath petroleum reservoir, proving the great hydrocarbon potential in this area.

Deposition of cenomanian – Turonian organic-rich units on the mid-Norwegian margin: Controlling factors and regional implications

On the mid-Norwegian margin, extensive rifting and subsequent deposition of thick Cretaceous and Cenozoic sediments have buried the traditional Upper Jurassic organic-rich shales too deep. Consequently, these organic-rich shales are overmature and spent in the deep basins on the mid-Norwegian margin. The absence of well-control, variable seismic quality and in particularly, the great burial depth, makes it difficult to identify alternative Upper Jurassic and Lower Cretaceous organic-rich units. By combining high-resolution 2D seismic data, well logs, and Rock-Eval data, this study documents the presence of alternative organic-rich units in the Cretaceous succession on the Halten Terrace and the Vøring Basin. Multiple seismic horizons which correspond to regional flooding surfaces and define a series of seismic sequences have been mapped across the study area. The regionally extensive upper Cenomanian horizon is associated with wireline log signals and Rock-Eval parameters which imply the presence of a potential source rock unit. Source rock evaluation indicate that this unit contains mainly kerogen Type III on the Halten Terrace, suggesting an organofacies with significant contribution from terrestrial sources. In the Vøring Basin, the unit is sparsely drilled but appears to be mature, thus displaying a relatively limited potential. One well from the Vigrid Syncline demonstrate somewhat higher potential, with Rock-Eval data indicating a kerogen Type II composition. As such, more prolific units seems to exist in the Vøring Basin, albeit exhibiting a patchy distribution. We speculate that the deposition and preservation of this upper Cenomanian organic-rich unit record the development of an extended oxygen minimum zone attributable to increased primary production and sluggish water circulation, linked to the global Oceanic Anoxic Event 2 (OAE 2). However, local physiographic conditions, such as high sedimentation rates, erosion by gravity flows and periodically oxygenated conditions hindered preservation of a significant quantities of organic matter, thus limiting the thickness and quality of the upper Cenomanian organic-rich unit on the mid-Norwegian margin.

Characterization of blocks within a near seafloor Neogene MTC, Orange Basin: Constraints from a high-resolution 3D seismic data

Submarine mass wasting processes in deepwater settings can incorporate large blocks, which may play a key role in deepwater geological processes and geohazard assessment. However, there is a limited understanding of the deformation style arising from the interaction between submarine blocks and structural/bathymetric barriers such as ramps. The deformation and kinematic history of several submarine blocks (with a thickness of up to 150 m) within a near seafloor mass transport complex in the Orange Basin are documented using seismic geomorphic methods. The interpreted blocks are preserved in three discrete fault-bounded morphological terrains within a Neogene mass-transport complex. These terrains vary in lengths from 2 km to 6 km; they have heights of 60 m to 150 m and are characterized by discrete and localized structural highs on the present-day seafloor. Block sizes vary across terrains suggesting differences in the block evolution process. Blocks near the ramp appear in seismic profiles comprising (a) Chaotic and transparent seismic reflections and (b) parallel to sub-parallel, continuous, low to moderate amplitude reflections. This variability in seismic facies of the blocks reflects the degree of their interaction and translation over a ramp at the basal shear zone of the mass transport complex, evidenced by the difference in the block features on the upslope portion of the ramp versus the downslope part. Notably, the deformation styles recorded in the blocks show the impact of the ramp during mass flow, which has broader implications for understanding the internal mechanisms of blocky mass transport complexes in many continental margins.

Coral reef development and sea-level changes over the past 50,000 years: new evidence from the north-west shelf of Australia

Understanding of global sea-level changes and coral reef development is poorly constrained during Marine Isotope Stage 3 (MIS 3; ~ 60 to 30 ka). Australia’s North West Shelf (NWS), at depths of ~ 50 to 120 m below present sea-level (mbsl), represents an ideal natural laboratory to address these knowledge gaps. In this study, the authors investigate a unique suite of sea-bed rock drill (PROD) cores recovered as part of a geotechnical survey from the NWS ~ 150 km south-east of Ashmore Reef. Twenty cores, penetrating to 28 m below sea floor, were collected from the top of the now drowned platform complex in similar water depths (74.8 to 81.6 mbsl), forming two transects ~ 17 km apart. High-resolution 3D seismic and multibeam bathymetry data reveal three distinct, multigenerational platforms that are rimmed by smaller reef terraces and bisected by deeper channels, placing the core transects into a robust, regional geomorphic context that includes a succession of linear palaeo-shorelines and tidal-estuarine channel systems on the adjacent shelf between ~ 90 to 110 mbsl. The authors have completed detailed logging, high-spatial resolution hyperspectral scanning, petrologic, mineralogic and sedimentary facies analysis of these cores, including a precise palaeoenvironmental reconstruction based on coral, algal and larger benthic foraminifera assemblages; and extensive radiometric dating. The authors have observed a complex suite of lithologies including in situ coralgal reef frameworks, well-lithified to friable grainstones, packstones and coralline algal floatstone facies separated by at least two major palaeosol horizons. Together with thirty 14C-AMS and closed-system U/Th ages spanning 10.7 to > 50 ka, the authors define a complex but consistent record of four distinct chrono-stratigraphic units (Units 1 to 4), representing a repeated succession of shallow reef to deep reef-slope depositional settings as the platforms experienced repeated sea-level oscillations (interstadial/stadial to glacial/deglacial) over the last 75,000 yr. Two distinct phases of shallow-water, high-energy reef development are defined. The age of the older, diagenetically distinct reef unit (Unit 3) is unknown but interpreted to have developed before the MIS 4 lowstand (~ 65 ka). However, firm chronological constraints on the MIS 3 development of the younger reef unit (Unit 2), place the position of relative sea-level (RSL) between ~ 63 to 75 + 1.8 mbsl by 45.95 to 39.23 + 0.2 ka, consistent with other predictions and observations for the region. Following its exposure and demise due to sea-level fall to the Last Glacial Maximum (LGM), the platform system was unable to re-establish fully as it was reflooded during the subsequent deglacial sea-level rise. Deeper reef slope (Unit 1) facies dominate the core tops between ~ 13.2 to 10.7 ka, representing a major hiatus in shallow-water reef development on the platforms. Deglacial sea-level rise was either too fast and/or other environmental conditions inadequate (i.e. massive riverine sediment flux due to the strengthening Australian summer monsoon and/or reworking of shelf sediments) to allow re-establishment of shallow-water coral reef development on the platforms apart from a few isolated and distal locations (i.e. Ashmore, Cartier, Adele and Scott Reefs).