High Rate Applications Research Articles

Synergistic impact of tank mixing pendimethalin and pyroxasulfone on soil enzymatic and microbial dynamics.

A field experiment was carried out during the Rabi 2022-23 at Punjab Agricultural University, Ludhiana to evaluate the effect of pyroxasulfone and pendimethalin on soil enzymatic and microbial activities when applied individually or as a tank mix combination. The experiment employed a factorial randomized complete block design in triplicate encompassing 16 treatments. Control soils exhibited a continuous increase in enzymatic and microbial activities over time. In herbicide-treated plots, a highly dose-dependent lag phase was observed in all enzymatic and microbial activities which gets shorter or disappear at higher application rates. Following the initial lag phase, inhibition in enzymatic and microbial activities was observed with higher inhibition in tank mix combination (90.7 to 99.1% up to 90days after herbicide application (DAA) followed by pendimethalin (77.3 to 92.9% up to 90 DAA) and pyroxasulfone (30.3 to 76.2% up to 45 DAA). After initial inhibition, enzymatic and microbial activities increased at harvest. Principal component analysis (PCA) revealed that dehydrogenase activity among soil enzymes and bacteria among microbial populations were more sensitive to studied herbicides. Based on the values of the Integrated Biomarker Response (IBRv2), pendimethalin had a greater impact on soil activities than pyroxasulfone, and their combined application exhibited a synergistic effect.

A multi-center study on the use of lidocaine thermogel for pain control in outpatient operative hysteroscopy

ObjectivesThis study aimed to explore the use of an anesthetic lidocaine thermogel in outpatient operative hysteroscopies. Specifically, it assessed the safety, tolerability, and ease of use of the gel, as well as its potential for pain reduction during the procedure. Study designThis was a multicenter observational study conducted in 9 gynecological units between March 2023 and January 2024. The study included adult women scheduled for outpatient operative hysteroscopies, excluding those with hypersensitivity to the product or recent participation in other clinical studies. The target sample size was 60 to account for potential dropouts. Data collection was electronic, and SPSS was used for analysis. The study assessed visibility conditions, procedure duration, pain scores at different stages of the procedure, and adverse event frequency. Statistical analyses utilized descriptive statistics, Student’s t-tests, Wilcoxon and Friedman tests, and Chi-Square or Fisher tests as appropriate. Binary logistic regression was applied to identify factors influencing gel volume. ResultsAll 60 participants met the inclusion criteria. The mean age was 45.5 (SD 8.8) years, with a mean BMI of 27.0 (SD 5.6) kg/m2. Medical histories were reported in 46.7% of participants, and 50% had undergone previous gynecological surgeries. Prior to the procedure, 51.8% of participants took analgesics. The average procedure duration was 13.9 (SD 15.1) minutes. Pain scores were collected at different stages of the procedure, with median VAS scores ranging from 0 to 5 out of 10. In 50% of cases, the quality of vision during the procedure was rated 9 or higher on a 10-point scale. The full recommended dose of thermogel was administered in 91.7% of cases. The mean gel volume used was 7.0 (SD 1.9) milliliters. Regression analysis showed that younger age and a history of abortions or childbirth were significantly associated with higher gel volume use. ConclusionsThe anesthetic thermogel demonstrated effectiveness in managing pain during outpatient operative hysteroscopies, with median pain scores ranging from 0 to 5 out of 10 across different stages of the procedure. The gel showed a favorable safety profile, with only 15% of participants reporting adverse effects, all of which were minor and resolved satisfactorily. The high rate of complete gel application (91.7% of cases) and positive physician feedback suggest good tolerability and ease of use. Further research is recommended to evaluate the gel’s efficacy in other gynecological procedures and to optimize application protocols based on patient-specific factors such as age and reproductive history.

The effect of interfacial alloy formation on the mechanical properties of the additively manufactured Ti6Al4V/Ti1Al8V5Fe microstructurally graded material

Multi-material (MM) structures have been shown in the past to be potential candidates for future high performance high strain rate applications. With the advancement of MM additive manufacturing (AM), there is a renewed push to explore the vast array of materials combinations to deliver advanced protective capabilities. At the same time, many fundamental issues are still plaguing MM assemblies, primarily linked to the often-poor quality of the MM interface. Here, we present a novel approach to obtain microstructural and mechanical properties gradient without interface defects by leveraging the link between the chemical composition and complex grain/phase morphology in titanium alloys. We used additive manufacturing (AM) to combine α+β-titanium alloy Ti6Al4V with metastable β-titanium alloy Ti1Al8V5Fe (which belong to different alloy classes but share common alloying elements), into a microstructurally graded material (MGM). Uniquely, the classic MM interface was replaced by the two additional intermixed alloy layers with unique chemical composition, microstructure and mechanical properties, with both ultimately making a significant contribution to the overall performance. The properties of these interface alloys are affected by many factors, such as thermal properties of the substrate, process parameters, alloying element distribution and post-manufacturing heat treatment. As a result, we showed that a superior combination of the strength and ductility could be achieved in the hybrid material after heat treatment compared to the original materials or the as-built hybrid material, which was ultimately attributed to the formation of the interface alloys. The presented approach is not limited to titanium alloys and could be extended to other materials systems and is expected to contribute to the development of a deeper understanding of the intermixing phenomena and its effects on microstructure and mechanical performance of MGMs, opening the door to a range of unique solutions in alloy and MM structural design for high performance applications.

Impact Loading on Polymer Nanocomposites - A Comprehensive Review

In recent days, the application of polymer nanocomposites (NC) has grown exponentially due to its varied applications and efficacy. However, it is also associated with various challenges and need of optimal solutions to address the same. Excellent properties in the area of high strain rate applications are usually addressed during fabrication of nanocomposites using graphene, nano fillers, nano clay and carbon nano tubes. Such NC offer good properties associated with thermal stability and unique desirable properties making them excellent replacements for conventional materials used so far. Their applications are found in defense, space and automobile sectors. Though NC have numerous positive characteristics, the reason behind their failure mechanism under loading conditions with static and dynamic is unanswered or not comprehensively clear. This article enumerates the collective review of the challenges and solutions addressed by various researchers. It includes techniques used for characterizing nanocomposites with respect to failure governing mechanism for both organic and inorganic NC.

Contribution of distinct components in divergent organic amendments to long-term accumulation of soil organic matter in agricultural soils: evidence from thermally assisted hydrolysis and methylation-GC/MS.

Although maintaining/improving soil organic matter (SOM) quantity through utilizing organic amendments (OAs) is a productive practice, information on OA components contributing to long-term SOM accumulation in agricultural soils remains meager. Hence, we examined soil samples from a long-term experiment with different fertilizer managements, including no fertilizer (NF), chemical fertilizer (CF) only (CF), bark compost plus CF (BC + CF), coffee residue compost plus CF (CRC + CF), cattle manure compost plus CF (CMC + CF), and cattle manure compost (CMC) or sewage sludge compost (SSC) alone at a higher application rate. SOM in those samples was physically fractionated into free particulate form (fSOM), free form occluded in aggregates (oSOM), weakly bound form (wSOM), and strongly bound form (sSOM). Analysis of structural components in OAs and SOM fractions using thermally assisted hydrolysis and methylation combined with gas chromatography/mass spectrometry (THM-GC/MS) revealed OA components that have contributed to long-term SOM accumulation in each treatment. The SSC was characterized by higher proportions of short-chain fatty acids (FAs; 50%) and other aliphatic compounds (22%). Correlation analysis suggested that these characteristics may be effective for greater C accumulation in the bulk soil and wSOM fraction. The proportion of lignin-derived phenols, e.g., 3,4-dimethoxybenzaldehyde (Vh) and 1,2-dimethoxy-4-(1,2,3-trimethoxypropyl)benzene, was high in CMC (43%), presumably vital for promoting C accumulations in the oSOM, wSOM, and sSOM fractions in the CMC treatment. The short-chain FAs in CRC and aromatic components in BC are likely important for contributing fSOM accumulation.

Application of biochar and selenium together at low dose efficiently reduces mercury and methylmercury accumulation in rice grains

Irrespective of cost and ecological risk, literatures have reported that both biochar and selenium (Se) alone at high application rate exhibited positive effects on decreasing rice mercury (Hg) uptake in high Hg contaminated paddy soil. In this study, we investigated whether biochar and Se together at low dose could efficiently reduce the rice grain Hg and MeHg accumulation in the slight Hg-contaminated soil. Compared with control (CK), the Hg concentration of grains in the BC3, Se0.5, and BC3 + Se0.5 treatments decreased by 5.4 %, 38.3 %, and 48.5 %, respectively. Co-application of biochar and Se also decreased the methylmercury (MeHg) concentration in rice grains by 29.1–91.6 %. The decrease of Hg and MeHg level in rice grains for biochar and Se treatments could be attributed to the following mechanisms: (1) high Hg (primarily inorganic Hg) adsorption on biochar through its high hydroxyl groups and large specific surface area; (2) Increased dissolved organic carbon and cysteine contents in pore water after biochar application, which reduced the availability of soil Hg through complexation; (3) Decreased bioavailability of Hg in soil due to the formation of HgSe precipitation which inhibited Hg uptake and translation by rice plant; (4) Both biochar and Se facilitated the reduction of MeHg in soil. Our results indicate that co-application of biochar and Se at low dose is a promising method to effectively mitigate Hg accumulation in rice grains from the slight Hg-contaminated soil.

S@FeS2 Core-Shell Cathode Nanomaterial for Preventing Polysulfides Shuttling and Forming Solid Electrolyte Interphase in High-Rate Li-S Batteries.

Lithium-sulfur (Li-S) battery is a potential next-generation energy storage technology over lithium-ion batteries for high capacity, cost-effective, and environmentally friendly solutions. However, several issues including polysulfides shuttle, low conductivity and limited rate-capability have hampered its practical application. Herein, a new class of cathode active material with perfect core-shell structure is reported, in which sulfur is fully encapsulated by conductivity-enhancing FeS2 (named as S@FeS2), for high-rate application. Surface-stabilized S@FeS2 cathode exhibits a stable cycling performance under 2 - 20 times higher rates (1-2 C, charged in 30-60min) than standard rates (e.g., 0.1-0.5C, charged in 2-10h), without polysulfides shuttle event. Surface analysis results reveal the unprecedented formation of a stable solid electrolyte interphase (SEI) layer on S@FeS2 cathode, which is distinguished from other sulfur-based cathodes that are not able to form the SEI layer. The data suggest that the prevention of polysulfides shuttling is owing to the surface protection effect of FeS2 shell and the SEI layer formation overlying core-shell S@FeS2. This unique and potential material concept proposed in the present study will give insight into designing a prospective fast charging Li-S battery.

Phosphate Fertilizers’ Dual Role in Cadmium-Polluted Acidic Agricultural Soils: Dosage Dependency and Passivation Potential

Cadmium (Cd) contamination in agricultural soils is a common issue, posing health risks as it enters the human body through the food chain. Commonly used phosphate fertilizers (PFs) not only provide essential phosphorus (P) nutrients to crops but also serve as P-containing materials for immobilizing heavy metals (HMs) like Cd in soils. Therefore, understanding the passivation effects of PFs on soil Cd and their potential influencing factors is crucial for mitigating soil Cd pollution. In this study, the impact of multi-crop applications (75 mg P kg−1, 150 mg P kg−1) of four kinds of PFs on reducing soil Cd toxicity and decreasing Cd accumulation in spinach was investigated. The results indicated that under the low application rate (75.0 mg P kg−1), all PFs could passivate Cd, and CMP demonstrated the most effective passivation of Cd. However, under the high application rate (150 mg P kg−1), the immobilization effect diminished or even activated Cd. Among the different types of PFs, CMP application alleviated soil acidification and significantly reduced soil-available Cd, showing the best performance in promoting spinach growth and Cd inhibition. These results suggest that PF application in Cd-contaminated soils affects spinach growth and Cd accumulation, with soil pH, available phosphorus (AP), and Cd dynamics being crucial; moreover, low-P, micronutrient-rich, alkaline PFs like CMP optimize spinach yields and minimize Cd uptake, and excessive application of soluble PFs decreases pH, increases Cd mobility, and poses health risks, suggesting a need for balanced fertilizer use.

Fate of per- and polyfluoroalkyl substances at a 40-year dedicated municipal biosolids land disposal site

The fate of per- and polyfluoroalkyl substances (PFAS) was evaluated at a site where municipal biosolids have been applied annually for 38 years as a waste management strategy. Soil cores (1.8 m in 30-cm sections), groundwater from four wells, and biosolids applied in 2022 were analyzed for PFAS (54 targeted, 17 semi-quantified) using liquid chromatography high resolution mass spectrometry including suspect screening. Total PFAS concentrations decreased with soil depth from 1700 ng/g to 2.06 ng/g. PFAS distribution in 2022 biosolids were 60 mol% perfluoroalkyl acid (PFAA) precursors and intermediates. The surface soil was dominated by long-chain PFAAs (67–76 mol%) reflecting precursor degradation after biosolids application. Presence of semi-quantified intermediates further reflects precursor degradation in surface soil. Long-chain PFAAs diminished with depth while short-chain PFAAs increased with up to 98 and 96 mol% short-chain PFAAs in the bottom depth and groundwater, respectively. PFAS distribution with depth is consistent with chain-length dependent sorption-impacted transport and the high organic carbon content of the surface soil (15.2 % OC) which subsequently decreased with depth (~2–3 % OC at >60 cm). High organic carbon content in the upper horizon is likely from decades of high biosolids application rates, which contributed to minimizing leaching of long-chain PFAS. While the well within the dedicated land disposal is not drinking water, for comparison only, PFAS concentrations in this well only marginally exceeded the EU drinking water directive for total PFAS and a few individual short-chain PFAS, but did exceed tenfold, the USEPA drinking water standard for PFOA.

Integrating low-cost GNSS and MEMS accelerometer for precise dynamic displacement monitoring

We assess the performance of the self-developed receiver coupling dual-frequency low-cost GNSS chipset and IMU MEMS sensor. The system also comprises software dedicated to vibration monitoring based on relative kinematic positioning in a post-processing mode. The observation assessment reveals high accuracy of low-cost GNSS and MEMS accelerometer data. The Septentrio Mosaic X5 chipset exhibits competitive to high-grade receivers’ phase observation noise, outperformance in code noise level and observation auto-correlation at a level that may be neglected even in high-rate applications. The evaluation of the MEMS accelerometer data proves that the sensor accuracy is adequate for vibration monitoring. With the shake table experiment, we examine the performance of vibration recovery. An advantage of the coupled solution over a GNSS-only one is documented with a 15 % reduction of the amplitude error. The backward smoothing of coupled solutions drives the next 20 % error drop. Finally, the high performance of the coupled solution based on low-cost GNSS & accelerometer is confirmed by a mean amplitude error of 0.4 mm. The frequency analyses indicate that both coupled and single-sensor solutions precisely detect the vibration frequencies; however, they also confirm the outperformance of the former over the latter. The power spectra of the recovered displacement time series accentuate the benefits of GNSS + accelerometer fusion and backward filtering for reducing displacement noise.

Understanding the role of pig manure, rice straw, and calcium carbonate on the cadmium pollution in soil–wheat system

AbstractTo explore the specific effects of pig manure and rice straw on cadmium‐contaminated soils and the effect of different mass fractions of calcium carbonate on cadmium efficacy, a pot experiment was conducted with different rates of pig manure, rice straw, and calcium carbonate. The results showed that pig manure addition increased the soil humic acid/fulvic acid ratio, thereby reducing the available Cd. The addition of calcium carbonate increased the soil pH and reduced the available Cd. The addition of pig manure and calcium carbonate significantly reduced the Cd content of wheat grains by 51.96% and 45.95%, respectively, at 3% and 5% application rates. Rice straw application reduced the soil pH, improved the soil Cd availability, and increased the accumulation of Cd in wheat grains. Compared with that in the control, the grain biomass increased significantly with 3% pig manure and 3% rice straw application, and the grain biomass increased significantly, by 58.86% and 39.11%, and 93.3% and 75.08%, respectively, in 2020 and 2021. With the application of calcium carbonate, the grain biomass of wheat first decreased and then increased. Additionally, the grain biomass significantly increased by 26.36% and 71.22%, respectively, at the 5% calcium carbonate application rate. Therefore, high application rates of pig manure (3% and 5%) have potential application in the safe production of wheat in Cd‐contaminated soils.

Reaching China’s fertilizer reduction goals through nitrogen and phosphorus recovery: a substance flow analysis case study

Linear agricultural nutrient regimes are the principal cause for perturbation of the geochemical cycles for nitrogen (N) and phosphorus (P) and other planetary boundaries. Nutrient cycles are characterized by high spatial disparity and China is a hotspot due to high fertilizer application rates. Using substance flow analysis, this study identified and quantified nutrient flows from agricultural production to residue management of Huangyan tangerines (Citrus reticulata) and water bamboo (Zizania latifolia) in a case study of Huangyan district (Taizhou City, Zhejiang province). About 754 Mg/a of N and 105 Mg/a of P can theoretically be recovered in the tangerines and water bamboo systems from currently untapped material flows. This could replace 59% of the N and 15% of the P currently applied as chemical fertilizer, reducing environmental impacts. Combining the nutrient recovery of both systems and upscaling the results to Taizhou City, the goal from the 14th Five-Year Plan for Agricultural and Rural Modernization to save 1182 Mg of nutrients per year could be exceeded by almost 12 times. This study’s data have varying degrees of uncertainty. The analysis of data representativeness shows potential for improvements, especially in the agricultural production of water bamboo and the nutrient contents of material flows.

Negative Aspects of Dietary Habits in Children and Adolescents with Autism Spectrum Disorders.

Diet therapy is a key component of a holistic approach to the physiological and psychological health of children with autism spectrum disorders. A personalized diet, tailored to clinical symptoms, yields positive therapeutic effects. The aim of this study was to assess the intake of specific food groups and the dietary methods used among children and adolescents with autism. This study included 141 patients from neuropediatric centers diagnosed with autism spectrum disorders. Inclusion criteria were parental consent for the study, age of the child, and autism diagnosis. The research tool was a custom questionnaire covering patients' demographic data, type of disorder, and a qualitative analysis of the dietary habits of selected products. The predominant dietary models were the basic diet (n = 26; 72.22%) and the elimination diet (n = 9; 25%), with a higher application rate among children with autism spectrum disorders. Aversion to specific foods/products was more prevalent in children with autism (n = 79; 75.24%) compared to those with other neurodevelopmental disorders (n = 10; 27.78%). Snacking between meals was significantly more common among the overall neuropediatric patient group (n = 140; 99.29%), with fruit purees (n = 33; 23.57%) and fruits (n = 28; 20%) being the most frequently consumed snacks. The qualitative analysis of dietary habits revealed selective food aversions and eating disorders due to a narrow range of frequently consumed products within dietary groups.

Fertility and tillage intensity affect weed community diversity and functional structure in long-term organic systems.

Knowledge of how agricultural management interacts with weed seed banks and emergent weed communities is crucial for proactive weed management. Though studies have detailed how differences in disturbance and nutrient applications between organic and conventional herbicide-based systems affect weed communities, few have focused on these same factors in contrasting organic systems. This study assessed the seed banks and emergent weed communities from the most recent crop rotation cycle (2017-2022) of a long-term experiment, which compared four organic grain and forage cropping systems differing in nutrient inputs and soil disturbance. The high fertility (HF) system received high-rate nutrient applications, low fertility (LF) received low-rate applications, enhanced weed management (EWM) focused on weed control through frequent soil disturbance, and reduced tillage (RT) prioritized soil health with less intense or frequent soil disturbance. Soil samples for greenhouse germination assays were collected at the beginning (2017) and end (2022) of the rotation to explore how these four systems influenced seed bank dynamics over time. Weed community biomass was also sampled in each crop during this time. Treatment effects on weed abundance, taxonomic diversity, and community-weighted means and functional dispersion of weed traits were analyzed with generalized mixed-effect models. The RT system had the highest weed seed bank taxonomic diversity, and EWM had the lowest. RT and LF had higher functional dispersion of traits than HF in the seed bank. Weed seed bank communities in HF and RT were characterized by short, small-seeded, and early germinating weed species. However, seed banks were also labile: Differences between systems in seed density and all other mean trait values were dependent on the crop, which preceded seed bank sampling. Likewise, differences among emergent weed communities in the four systems depended on an interaction between crop species and their planting year. Results suggest that resource availability and intensity of disturbance act as weed community assembly filters in organic cropping systems. Organic growers seeking to design systems that balance weed management and production goals can use relatively low soil disturbance and nutrient application to increase weed community taxonomic or functional diversity without necessarily increasing weed biomass or seed bank density.

Precision management influences productivity and nutrients availability in dryland cropping system

AbstractPrecision management (PM) aims to reduce inputs while increasing land productivity and economical return and enhancing cropping system resiliency to climate change. This study evaluated how climate (precipitation) and management influenced yields and soil nutrients in a dryland agricultural system. We compared an “aspirational” (ASP) system (no‐till, 4‐year rotation of winter wheat [Triticum aestivum L.], corn [Zea mays L.], proso millet [Panicum miliaceum L.], and fallow/flex) to a traditional “business‐as‐usual” (BAU) system (reduced tillage, 2‐year rotation of winter wheat and fallow: W–F). Phases of each rotation were included yearly throughout the study period (2018–2022) with three replications. The ASP system incorporated PM by dividing each ASP field into three zones (high‐, medium‐, and low‐PM) according to prior yield and topography. Nitrogen was applied at high, medium, or low application rates within those zones. Under favorable precipitation, wheat, corn, and millet yields responded to PM treatments, with yields increasing proportional to N addition. Years with low in‐season precipitation had a significant reduction in wheat and corn yields (2020 and 2022) and complete millet yield failures (2020 and 2021). Low soil organic matter accumulation (0.1%–0.5%) and a reduction in soil macro‐ and micronutrient status suggested that soil nutrient additions are needed to prevent soil‐nutrient degradation. The ASP treatment added a third crop every 4 years and did so without significantly decreasing wheat yield following fallow. The ASP management shows promise as an alternative to BAU in the Great Plains dryland production region.

Utilizing biochars to stabilize mercury in contaminated floodplain sediment: Implications on mercury remediation.

Major weather events contribute to the mobility and remobilization of legacy mercury (Hg) contamination and sequestration within sediments. Remediation using biochar as a soil amendment is a useful technique to immobilize and decrease Hg toxicity. This study explored whether biochar application is effective at stabilizing labile mercury (LaHg) from floodplain sediment. Controlled mesocosms simulating contamination events and flooding conditions were conducted. Floodplain sediment, which experiences annual periodic flooding, was collected. Sediment was spiked with inorganic Hg, applied with different types of biochar, and experienced simulated flooding events. Four types of biochar, pure rice husk (RH), pure peanut hull (PH), sulfur-modified rice husk (SMRH), and sulfur-modified peanut hull (SMPH), were applied at 10 and 40g/kg rates (i.e., RH 10, RH 40; PH 10, PH 40, SMRH 10, SMRH 40, SMPH 10, SMPH 40). Total Hg, methylmercury, and LaHg concentrations were analyzed by coupling with redox potential measurements. Results indicate that SMRH 10, PH 10, PH 40, SMPH 10, and SMPH 40 successfully remediate Hg by stabilizing and reducing LaHg species from floodplain sediment. However, a high Hg methylation potential was observed with unsulfated and sulfated peanut hulls (PH 10, PH 40, SMPH 10, and SMPH 40), as they tend to create a reducing microenvironment that favors sulfate reduction reactions. Additionally, sulfur-modified biochar tends to promote Hg methylation potential at high application rates (i.e., 40g/kg). We thus recommend using SMRH at a relatively low application rate (SMRH 10) for the remediation of Hg from floodplain sediment.

Integrated Active Quenching Circuit for high-rate and distortionless SPAD-based time-resolved fluorescence applications.

Time-Correlated Single Photon Counting (TCSPC) is a pivotal technique in low-light-detection applications, renowned for its exceptional sensitivity and bandwidth, widely used in Fluorescence Lifetime Imaging Microscopy (FLIM) and quantum optics. Despite its features, TCSPC is significantly hindered by the pile-up effect, which may distort measurements at high photon-detection rates. Overcoming pile-up is challenging, with traditional solutions often involving complex post-processing or multichannel systems, complicating the TCSPC setup and limiting performance. A breakthrough to overcome this issue is matching the photodetector dead time to an integer multiple of the laser period, obtaining a distortionless histogram even at high illumination conditions. Building on this concept, we present an Active Quenching Circuit (AQC) developed in high-voltage 150 nm technology, achieving unprecedented control over the Single Photon Avalanche Diode (SPAD) dead time. Our design compensates for Process, Voltage, and Temperature (PVT) variations, ensuring ultra precise and robust dead time tuning. The presented AQC achieves a dead-time resolution of 50 ps suitable for time-resolved experiments within a selectable range of laser frequencies from 20 to 100 MHz, maintaining close-to- ideal linearity in dead-time control. Experimental validations through fluorescence measurements reveal a distortion as low as 0.43% under elevated count-rate conditions, highlighting the efficacy of our circuit in overcoming the pile-up limitation.

Phosphorus High-rate application through band placement improved cotton productivity under arid climate

The plant-available soil phosphorus rate and methods for applying phosphatic fertilizer and soil P-fixation capacity are critical factors for lower cotton productivity in Southern Punjab, Pakistan. Hence, a two-year study was conducted in Central Cotton Research Institute (CCRI), Multan, Pakistan, to examine the effects of various P rates and application methods on cotton crop output during the growing seasons of 2014 and 2015. Phosphorus was applied in four rates (0, 40, 80, and 120 kg ha−1 P2O5) using broadcast, band application, and fertigation methods. Results indicated that the impact of P rates was statistically significant on plant height, the number of nodes, monopodial and sympodial branches, leaf area index, harvest index, and seed cotton yield. The greater P application (120 kg P2O5 ha−1) had a better effect on cotton productivity than the lower application rates (0, 40, and 80 kg P2O5 ha−1). The band application responded better on nodes plant−1, sympodial branches plant−1, boll weight, leaf area index, lint yield, and harvest during the growing season 2015. Therefore, by adopting the band application coupled with 120 kg P2O5 ha−1 rather than the conventional method of broadcast, productivity of cotton crops could be increased.

Biochar and soil contributions to crop lodging and yield performance - A meta-analysis

Applying biochar has beneficial effects on regulating plant growth by providing water and nutrient availability for plants due to its physicochemical characteristics. Nevertheless, it is still unclear how soil and biochar interactions strengthen crop lodging resistance. The objective of the current study was to find out how soil physicochemical conditions and alterations in biochar affect lodging resistance and crop productivity in cereals. To do this, a meta-analysis was carried out using nine groups of effective variables including type of feedstock, pyrolysis temperature, application rate, soil pH, total nitrogen, available phosphorus, potassium, organic matter (OM), and soil texture. Results showed that straw-derived biochar caused the highest positive effect size in the dry weight of biomass (20.5%) and grain yield (19.9%). Also, the lowest lodging index was observed from straw (−8.3%) and wood-based (−5.6%) biochars. Besides, the high application rate of biochar results in the highest positive effect sizes of plant cellulose (8.1%) and lignin content (7.6%). Soils that contain >20 g kg−1 OM, resulted in the highest positive effect size in dry biomass (27.9%), grain yield (30.2%), and plant height (4.7%). Also, fine-textured soil plays an important role in increasing polymers in the anatomical structure of plants. Overall, the strong connection between biochar and soil processes, particularly the availability of OM, could strengthen plants' ability to tolerate lodging stress and contribute to high nutrient efficiency in terms of crop output and cell wall thickening.

Model Predictive Control for Level Control of a Conical Tank

Conical tanks have a high application rate in industrial processes, especially in colloidal mills, chemical processes, and food processing. The use of conical tanks presents significant benefits because they contribute to sedimentation and reduce the accumulation of impurities compared to conventional cylindrical tanks. However, level control of a conical tank due to its shape requires advanced strategies to guarantee efficient control. In this research, a model predictive control (MPC) method was designed and implemented for the level control of a conical tank on a laboratory scale. To evaluate the performance of the controller, it was compared with a traditional proportional–integral (PI) controller, and the rise time, settling time, overshoot, and error in the steady state were analyzed when different set point changes were tested. In addition, the system was subjected to disturbances, and the MPC demonstrated better performance in a transient state, as well as smooth and stable action controls that allowed for an increase in the useful life of the actuator. In addition, an interactive graphical interface was developed that allowed a dynamic response in a real plant to be experienced; this provides an academic tool for designing control strategies before implementation in a real process.