High-quality Nucleic Acids Research Articles

DNARS: A safe, environmentally friendly and high-quality DNA extraction method suitable for various biological samples

The functional and interactional relationships between nucleic acids and proteins form the foundational framework for molecular biology studies. In this context, obtaining high-quality nucleic acids is a crucial step for successful downstream applications. This study aimed to develop a cost-effective, eco-friendly, and versatile DNA extraction method that yields high-quality DNA from diverse biological samples. We utilized three types of borosilicate-based recycled laboratory glass as a silica source, combined with sodium iodide as a chaotropic agent, creating an efficient system for cell lysis and DNA extraction. Quality control was performed by assessing the concentration and purity of the extracted DNA using spectrophotometry, and the results were compared to those obtained with a commercial kit. DNA integrity was evaluated via agarose gel electrophoresis. To verify the suitability of the extracted DNA for downstream applications, we conducted 16S rRNA and ITS PCR amplifications. Our findings demonstrated that our DNA extraction method produced significantly higher yields, better purity, and greater integrity compared to the commercial kit. Moreover, the extracted DNA was readily applicable in PCR-based procedures, confirming the method's effectiveness for molecular biology applications.

Spleen Swabs for Sensitive and High-Throughput Detection of African Swine Fever Virus by Real-Time PCR.

African swine fever (ASF) continues to spread in Africa, Europe, Asia and the island of Hispaniola, increasing the need to develop more streamlined and highly efficient surveillance and diagnostic capabilities. One way to achieve this is by further optimization of already established standard operating procedures to remove bottlenecks for high-throughput screening. Real-time polymerase chain reaction (real-time PCR) is the most sensitive and specific assay available for the early detection of the ASF virus (ASFV) genome, but it requires high-quality nucleic acid extracted from the samples. Whole blood from live pigs and spleen tissue from dead pigs are the preferred samples for real-time PCR. Whole blood can be used as is in nucleic acid extractions, but spleen tissues require an additional homogenization step. In this study, we compared the homogenates and swabs prepared from 52 spleen samples collected from pigs experimentally inoculated with highly and moderately virulent ASF virus strains. The results show that not only are the spleen swabs more sensitive when executed with a low-cell-count nucleic acid extraction procedure followed by real-time PCR assays but they also increase the ability to isolate ASFV from positive spleen samples. Swabbing is a convenient, simpler and less time-consuming alternative to tissue homogenization. Hence, we recommend spleen swabs over tissue homogenates for high-throughput detection of ASFV by real-time PCR.

Minute level ultra-rapid and thousand copies level high-sensitive pathogen nucleic acid identification based on contactless impedance detection microsensor

Early screening for pathogens is crucial during pandemic outbreaks. Nucleic acid testing (NAT) is a valuable method for keeping pathogens from spreading. However, the long detection time and large size of the instruments involved significantly limited the efficiency of detection. This work described an integrated NAT microsensor that facilitated rapid and extremely sensitive detection based on nucleic acid amplification (NAA) on a chip. The biochip consisted of two layers incorporating a heater, a thermometer, an interdigital electrode (IDE) and a reaction chamber. The Pt electrode based heater and thermometer were utilized to maintain a specific temperature for the sample in the chamber. The thermometer exhibited a good linear correlation with a sensitivity of 9.36 Ω/°C and the heater achieved a heating efficiency of approximately 6.5 °C/s. Multiple ions were released during NAA, resulting in a decrease in the impedance of the amplification system solution. A large signal of impedance was generated by the released ions due to its linear correlation with the logarithm of the ion concentration. With this detection principle, IDE was employed for real-time monitoring of the in-chip reaction system impedance and NAA process. Specific nucleic acids from two pathogens (SARS-CoV-2, Vibrio vulnificus) were detected with this microsensor. The samples were qualitatively analyzed on microchip within 3 min, with a limit of detection (LOD) of 103 copies/μL. The proposed sensor presented several advantages, including reduced NAT time and increased sensitivity. Consequently, it has shown significant potential in rapid and high-quality nucleic acid testing for the field of epidemic prevention.

An improved Trizol method for extracting total RNA from Eleutherococcus senticosus (Rupr. & Maxim.) Maxim leaves.

High-quality nucleic acids are the basis for molecular biology experiments. Traditional RNA extraction methods are not suitable for Eleutherococcus senticosus Maxim. To find a suitable method to improve the quality of RNA extracted, we modified the RNA extraction methods of Trizol. Based on the conventional Trizol method, the modified Trizol method 1 and modified Trizol method 2 were used as the control for extraction of RNA from E. senticosus Maxim leaves. The modified Trizol method 1 added β-mercaptoethanol on the conventional Trizol method. After RNA was dissolved, a mixed solution of phenol, chloroform, and isoamyl alcohol was added to denature protein and inhibit the degradation of RNA. The modified Trizol method 2 adds PVPP to grind on the basis of modified Trizol method 1, so as to better remove phenols from leaves, and eliminates the step of incubation at -20°C to reduce extraction time and RNA degradation. Chloroform, CTAB, and CH3COONa were used instead of a phenol, chloroform, and isoamyl alcohol mixed solution to ensure complete separation of nucleic acid from plant tissues and to obtain high-purity RNA. The research results showed that the quality of RNA extracted by conventional Trizol method, modified Trizol method 1, was incomplete, accompanied with different degrees of contamination of polysaccharides, polyphenols, and DNA. The modified Trizol method 2 could better extract RNA from E. senticosus Maxim leaves. The ratio of A260/A280 was in the range of 1.8-2.0, and the yield of RNA was the highest, which was 1.68 and 1.15 times compared with that by conventional Trizol method and modified Trizol method 1 extraction, respectively. The reverse transcription cDNA was further tested through PCR with the specific primers. The amplified fragments are displayed in clear and bright bands in accordance with the expected size. The modified Trizol method 2 could better extract RNA from E.senticosus Maxim leaves. High-quality RNA has more advantages in molecular biology study of E.senticosus Maxim.

Abstract 5054: Optimization and evaluation of an FFPE dual extraction protocol for next-generation sequencing applications

Abstract Formalin-fixed paraffin-embedded (FFPE) biopsies are highly valuable and widely used tissue specimens for clinical diagnostics. However, obtaining sufficient and high-quality nucleic acid material from limited FFPE samples presents a challenge for downstream molecular analysis, such as next-generation sequencing (NGS). We present an optimized sequential extraction method that generates high-quality DNA and RNA from a single set of input tissues that is automatable and operation-friendly. This workflow performs well with reduced FFPE tissue input and efficiently supports various high-throughput clinical NGS applications. The DNA/RNA yield, quality, purity, and impacts on NGS assay performances were on par or better than an existing validated comparator extraction method. With comparable FFPE input, the new method demonstrated a superior extraction performance with significantly higher yield, quality, and purity. For DNA, NGS libraries were made with two different library preparation methods: a TA-ligation-based method and a single-strand-based method, followed by hybrid capturing and sequencing. The DNA from the new extraction method demonstrated a superior library conversion rate and improved target enrichment uniformity with both chemistries. This provides the potential of reduced input requirements, allowing very limited tissue, such as fine needle aspirate or core needle biopsy, for clinical NGS testing. The sequencing results were highly concordant between the existing and new extraction methods when the extracted DNA was subjected to a validated comprehensive genomic profiling (CGP) clinical test, demonstrating the quality and robustness of the extraction. For RNA, NGS libraries were made following the validated CGP clinical test with hybrid capturing, and the results were comparable between the two extraction methods. In conclusion, an FFPE extraction method was optimized to allow more clinical biopsy samples to be tested with different NGS workflows, providing a better diagnostic value for patient care. Citation Format: Rebecca Hong, Jieying Chu, Steven Hsiao, Daniel Whang, Steven P. Rivera, Heng Xie, Jiannan Guo. Optimization and evaluation of an FFPE dual extraction protocol for next-generation sequencing applications [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 5054.

Cas-based bacterial detection: recent advances and perspectives.

Persistent bacterial infections pose a formidable threat to global health, contributing to widespread challenges in areas such as food safety, medical hygiene, and animal husbandry. Addressing this peril demands the urgent implementation of swift and highly sensitive detection methodologies suitable for point-of-care testing and large-scale screening. These methodologies play a pivotal role in the identification of pathogenic bacteria, discerning drug-resistant strains, and managing and treating diseases. Fortunately, new technology, the CRISPR/Cas system, has emerged. The clustered regularly interspaced short joint repeats (CRISPR) system, which is part of bacterial adaptive immunity, has already played a huge role in the field of gene editing. It has been employed as a diagnostic tool for virus detection, featuring high sensitivity, specificity, and single-nucleotide resolution. When applied to bacterial detection, it also surpasses expectations. In this review, we summarise recent advances in the detection of bacteria such as Mycobacterium tuberculosis (MTB), methicillin-resistant Staphylococcus aureus (MRSA), Escherichia coli (E. coli), Salmonella and Acinetobacter baumannii (A. baumannii) using the CRISPR/Cas system. We emphasize the significance and benefits of this methodology, showcasing the capability of diverse effector proteins to swiftly and precisely recognize bacterial pathogens. Furthermore, the CRISPR/Cas system exhibits promise in the identification of antibiotic-resistant strains. Nevertheless, this technology is not without challenges that need to be resolved. For example, CRISPR/Cas systems must overcome natural off-target effects and require high-quality nucleic acid samples to improve sensitivity and specificity. In addition, limited applicability due to the protospacer adjacent motif (PAM) needs to be addressed to increase its versatility. Despite the challenges, we are optimistic about the future of bacterial detection using CRISPR/Cas. We have already highlighted its potential in medical microbiology. As research progresses, this technology will revolutionize the detection of bacterial infections.

A universal protocol for high-quality DNA and RNA isolation from diverse plant species

Next-generation sequencing demands high-quality nucleic acid, yet isolating DNA and RNA is often challenging, particularly from plant tissues. Despite advances in developing various kits and reagents, these products are tailored to isolation of nucleic acid from model plant tissues. Here we introduce a universal lysis buffer to separate nucleic acid from various plant species, including recalcitrant plants, to facilitate molecular analyses, such as quantitative PCR (qPCR), transcriptomics, and whole-genome sequencing (WGS). The protocol is a modification of the original CTAB methods, which leads to nucleic acid isolation from many plant species, including monocots and eudicots. The lysis buffer consists of hexadecyltrimethylammonium bromide (CTAB), sodium chloride (NaCl), Tris base, ethylenediaminetetraacetic acid (EDTA) and β-mercaptoethanol (βME). The modified CTAB method enables the isolation of nucleic acid from small amounts of plant tissues (e.g., 15–100 mg) in a timely manner, which is well-suited for a large number of samples and also when adequate sample collection is a limiting factor. The protocol isolates not only DNA from various plant species but also RNA. This makes it highly effective for molecular analyses compared to previously described CTAB methods optimised for DNA isolation. The appropriate concentration of the components enables high-quality DNA and RNA isolation from plant tissues simultaneously. Additionally, this protocol is compatible with commercially available columns. For DNA and RNA to be qualified for next-generation sequencing platforms, the protocol is supplemented with columns to purify either DNA or RNA from the same tissue to meet high standards for sequencing analyses. This protocol provides an ideal approach to overcome potential obstacles in isolating high-quality DNA or RNA from a wide range of plant species for downstream molecular analysis.

Sample-to-answer sensing technologies for nucleic acid preparation and detection in the field.

Efficient sample preparation and accurate disease diagnosis under field conditions are of great importance for the early intervention of diseases in humans, animals, and plants. However, in-field preparation of high-quality nucleic acids from various specimens for downstream analyses, such as amplification and sequencing, is challenging. Thus, developing and adapting sample lysis and nucleic acid extraction protocols suitable for portable formats have drawn significant attention. Similarly, various nucleic acid amplification techniques and detection methods have also been explored. Combining these functions in an integrated platform has resulted in emergent sample-to-answer sensing systems that allow effective disease detection and analyses outside a laboratory. Such devices have a vast potential to improve healthcare in resource-limited settings, low-cost and distributed surveillance of diseases in food and agriculture industries, environmental monitoring, and defense against biological warfare and terrorism. This paper reviews recent advances in portable sample preparation technologies and facile detection methods that have been / or could be adopted into novel sample-to-answer devices. In addition, recent developments and challenges of commercial kits and devices targeting on-site diagnosis of various plant diseases are discussed.

Comparison and improvement of RNA extraction methods in Sargassum (Phaeophyta).

Sargassum (Sargassaceae) is widely distributed globally and plays an important role in regulating climate change, but the landscape of genomes and transcripts is less known. High-quality nucleic acids are the basis for molecular biology experiments such as high-throughput sequencing. Although extensive studies have documented methods of RNA extraction, these methods are not very applicable to Sargassum, which contains high levels of polysaccharides and polyphenols. To find a suitable method to improve the quality of RNA extracted, we compared and modified several popular RNA extraction methods and screened one practical method with three specific Sargassum spp. The results showed that three CTAB methods (denoted as Methods 1, 2, and 3) and the RNAprep Pure Plant Kit (denoted as Method 4) could, with slight modifications, effectively isolate RNA from Sargassum species, except for Method 4 used with S. fusiforme. By performing further screening, we determined Method 4 was the best choice for S. hemiphyllum and S. henslowianum, as revealed by RNA yields, RNA Integrity Number (RIN), extraction time, and unigene mapped ratio. For S. fusiforme, Methods 1, 2, and 3 showed no obvious differences among the yields, quality, or time to perform. In addition, one other method was tested, but we found the quality of the RNA extracted by TRIzol reagent methods (denoted as Method 5) performed the worst when compared with the above four methods. Therefore, our study provides four suitable methods for RNA extraction in Sargassum and is essential for future genetic exploration of Sargassum.

Evaluating direct amplification from viral transport medium for SARS-CoV-2 detection, strain typing, and angiotensin-converting enzyme genotyping and expression assays.

The aim of this study was to compare the performance of direct amplification of viral nucleic acid from transport medium to extracted nucleic acid for polymerase chain reaction (PCR), sequencing, and genotyping applications. XpressAmp lysate and extracted total nucleic acid from viral transport medium containing nasopharyngeal specimens were evaluated across different molecular applications to determine performance characteristics. SARS-CoV-2 quantitative PCR and angiotensin-converting enzyme (ACE) genotyping assays worked well with XpressAmp lysate, almost equal with or better than extracted nucleic acid in some specimens. However, XpressAmp completely failed to perform in next-generation sequencing for strain typing. Both protocols failed to detect ACE2 expression in viral transport medium. Direct amplification of viral nucleic acid from viral transport medium containing nasopharyngeal specimen works well for molecular assays with low thresholds of quality; however, it does have limitations with assays that require high quality nucleic acid for input. Use of the XpressAmp protocol significantly improves turnaround time and allows for easy ramp-up of PCR and genotyping assays.

A fast, low-cost, robust and high-throughput method for viral nucleic acid isolation based on NAxtra magnetic nanoparticles

The year of 2020 was profoundly marked by a global pandemic caused by a strain of coronavirus named severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the etiological agent of coronavirus disease 2019 (COVID-19). To control disease spread, a key strategy adopted by many countries was the regular testing of individuals for infection. This led to the rapid development of diagnostic testing technologies. In Norway, within a week, our group developed a test kit to quickly isolate viral RNA and safely detect SARS-CoV-2 infection with sensitivity comparable to available kits. Herein, the procedure employed for the detection of SARS-CoV-2 in swab samples from patients using the NTNU-COVID-19 test kit is described in detail. This procedure, based on NAxtra magnetic nanoparticles and an optimized nucleic acid extraction procedure, is robust, reliable, and straightforward, providing high-quality nucleic acids within 14 min. The NAxtra protocol is adaptable and was further validated for extraction of DNA and RNA from other types of viruses. A comparison of the protocol on different liquid handling systems is also presented. Due to the simplicity and low cost of this method, implementation of this technology to diagnose virus infections on a clinical setting would benefit health care systems, promoting sustainability.

Evaluation of 96-well high-throughput DNA extraction methods for 16S rRNA gene metabarcoding.

Gaining meaningful insights into bacterial communities associated with animal hosts requires the provision of high-quality nucleic acids. Although many studies have compared DNA extraction methods for samples with low bacterial biomass (e.g. water) or specific PCR inhibitors (e.g. plants), DNA extraction bias in samples without inherent technical constraint (e.g. animal samples) has received little attention. Furthermore, there is an urgent need to identify a DNA extraction methods in a high-throughput format that decreases the cost and time for processing large numbers of samples. We here evaluated five DNA extraction protocols, using silica membrane-based spin columns and a 96-well microplate format and based on either mechanical or enzymatic lysis or a combination of both, using three bacterial mock communities and Illumina sequencing of the V4 region of the 16SrRNA gene. Our results showed that none of the DNA extraction methods fully eliminated bias associated with unequal lysis efficiencies. However, we identified a DNA extraction method with a lower bias for each mock community standard. Of these methods, those including an enzymatic lysis showed biases specific to some bacteria. Altogether, these results again demonstrate the importance of DNA extraction standardization to be able to compare the microbiome results of different samples. In this attempt, we advise for the use of the 96-well DNeasy Blood and Tissue kit (Qiagen) with a zirconia bead-beating procedure, which optimizes altogether the cost, handling time and bacteria-specific effects associated with enzymatic lysis.

Genomics of turions from the Greater Duckweed reveal its pathways for dormancy and re-emergence strategy.

Over 15 families of aquatic plants are known to use a strategy of developmental switching upon environmental stress to produce dormant propagules called turions. However, few molecular details for turion biology have been elucidated due to the difficulties in isolating high-quality nucleic acids from this tissue. We successfully developed a new protocol to isolate high-quality transcripts and carried out RNA-seq analysis of mature turions from the Greater Duckweed Spirodela polyrhiza. Comparison of turion transcriptomes to that of fronds, the actively growing leaf-like tissue, were carried out. Bioinformatic analysis of high confidence, differentially expressed transcripts between frond and mature turion tissues revealed major pathways related to stress tolerance, starch and lipid metabolism, and dormancy that are mobilized to reprogram frond meristems for turion differentiation. We identified the key genes that are likely to drive starch and lipid accumulation during turion formation, as well as those in pathways for starch and lipid utilization upon turion germination. Comparison of genome-wide cytosine methylation levels also revealed evidence for epigenetic changes in the formation of turion tissues. Similarities between turions and seeds provide evidence that key regulators for seed maturation and germination were retooled for their function in turion biology.

The Development of a 3D Printer-Inspired, Microgravity-Compatible Sample Preparation Device for Future Use Inside the International Space Station.

Biological testing on the International Space Station (ISS) is necessary in order to monitor the microbial burden and identify risks to crew health. With support from a NASA Phase I Small Business Innovative Research contract, we have developed a compact prototype of a microgravity-compatible, automated versatile sample preparation platform (VSPP). The VSPP was built by modifying entry-level 3D printers that cost USD 200-USD 800. In addition, 3D printing was also used to prototype microgravity-compatible reagent wells and cartridges. The VSPP's primary function would enable NASA to rapidly identify microorganisms that could affect crew safety. It has the potential to process samples from various sample matrices (swab, potable water, blood, urine, etc.), thus yielding high-quality nucleic acids for downstream molecular detection and identification in a closed-cartridge system. When fully developed and validated in microgravity environments, this highly automated system will allow labor-intensive and time-consuming processes to be carried out via a turnkey, closed system using prefilled cartridges and magnetic particle-based chemistries. This manuscript demonstrates that the VSPP can extract high-quality nucleic acids from urine (Zika viral RNA) and whole blood (human RNase P gene) in a ground-level laboratory setting using nucleic acid-binding magnetic particles. The viral RNA detection data showed that the VSPP can process contrived urine samples at clinically relevant levels (as low as 50 PFU/extraction). The extraction of human DNA from eight replicate samples showed that the DNA extraction yield is highly consistent (there was a standard deviation of 0.4 threshold cycle when the extracted and purified DNA was tested via real-time polymerase chain reaction). Additionally, the VSPP underwent 2.1 s drop tower microgravity tests to determine if its components are compatible for use in microgravity. Our findings will aid future research in adapting extraction well geometry for 1 g and low g working environments operated by the VSPP. Future microgravity testing of the VSPP in the parabolic flights and in the ISS is planned.

Comparative Evaluation of Custom TNA Extraction Buffers to Obtain High-quality TNA from Shrimp and Polychaetes

Selecting the appropriate lysis buffers is crucial in obtaining high-quality nucleic acids for molecular pathogen detection. In this study, we compared three in-house and one commercial lysis buffer for their effectiveness in extracting high-quality TNA from Tiger shrimp and sandworm samples. Buffer L1 outperformed the commercial counterpart, producing higher TNA concentrations and concordant PCR results for all DNA and RNA targets in the Shrimp MultiPathTM. The findings underscore the significance of selecting the right extraction buffers to achieve high-quality nucleic acids for downstream molecular applications and suggest that in-house buffers can be a viable alternative to commercial ones for difficult-to-extract tissues.

Integrated slip valve-assisted fluidic chip coupling with CRISPR/Cas12a system for nucleic acid analysis

Currently, some on-site nucleic acid detection platforms have been developed. However, these platforms still need to be improved in device integration and multiple detection capability. In this work, an integrated dual nucleic acid analysis platform was developed by slip valve-assisted fluidic chip coupled with CRISPR/Cas12a system. All the reagents, including nucleic acid extraction, air-dried loop-mediated isothermal amplification (LAMP) and CRISPR/Cas12a detection reagents, were preloaded on the fluidic chip. Liquids transfer and stirring could be controlled by a slip valve and a syringe. By combining duplex LAMP reaction with two CRISPR detection units, CRISPR/Cas12a-based dual nucleic acid analysis was successfully constructed. Benefiting from high-quality nucleic acid extraction on the chip, as low as 30 copies/reaction of Vibrio parahaemolyticus (V. parahaemolyticus) and 20 copies/reaction of Salmonella typhimurium (S. typhimurium) could be simultaneously detected. Detection results could be observed by the naked eye under a portable ultraviolet lamp. The whole detection procedure was finished within 60 min. This method with integrated nucleic acid analysis, dual detection capability and fluorescence visualized results provides a new solution for on-site nucleic acid analysis.

Direct capture and amplification of nucleic acids using a universal, elution-free magnetic bead-based method for rapid pathogen detection in multiple types of biological samples.

Nucleic acid amplification tests (NAATs) have become an attractive approach for pathogen detection, and obtaining high-quality nucleic acid extracts from biological samples plays a critical role in ensuring accurate NAATs. In this work, we established an elution-free magnetic bead (MB)-based method by introducing polyethylene-polypropylene glycol (PEPPG) F68 in lysis buffer and using NaOH solution instead of alcohols as the washing buffer for rapid nucleic acid extraction from multiple types of biological samples, including nasopharyngeal swabs, serum, milk, and pork, which bypassed the nucleic acid elution step and allowed the nucleic acid/MB composite to be directly used as the template for amplification reactions. The entire extraction process was able to be completed in approximately 7 min. Even though the nucleic acid/MB composite could not be used for quantitative real-time PCR (qPCR) assays, this elution-free MB-based method significantly improved the sensitivity of the loop-mediated isothermal amplification (LAMP) assay. The sensitivity of the quantitative real-timeLAMP(qLAMP) assays combined with this elution-free MB-based method showed an improvement of one to three orders of magnitude compared with qLAMP or qPCR assays combined with the traditional MB-based method. In addition to manual operation, like the traditional MB-based method, this universal, rapid, and facile nucleic acid extraction method also has potential for integration into automated robotic processing, making it particularly suitable for the establishment of an analysis platform for ultrafast and sensitive pathogen detection in various biological samples both in centralized laboratories and at remote sites.

An automated system for nucleic acid extraction from formalin-fixed paraffin-embedded samples using high intensity focused ultrasound technology.

Formalin-fixed paraffin-embedded (FFPE) tissue samples are routinely used in prospective and retrospective studies. It is crucial to obtain high-quality nucleic acid (NA) from FFPE samples for downstream molecular analysis, such as quantitative polymerase chain reaction (PCR), Sanger sequencing, next-generation sequencing, and microarray, in both clinical diagnosis and basic research. The current NA extraction methods from FFPE samples using chemical solvent are tedious, environmentally unfriendly, and unamenable to automation or field deployment. We present a tool for NA extraction from FFPE samples using a high-intensity focused ultrasound (HIFU) technology. A cartridge strip containing reagents for FFPE sample deparaffinization and NA extraction and purification is operated by an automation tool consisting of a HIFU module, a liquid handling robot unit, and accessories including a thermal block and magnets. The HIFU module is a single concaved piezoelectric ceramic plate driven by a current-mode class-D power amplifier. Based on the ultrasonic cavitation effects, the HIFU module provides highly concentrated energy introducing paraffin emulsification and disintegration. The high quantity and quality of NA extracted using the reported system are evaluated by PCR and compared with the quantity and quality of NA extracted using the current standard methods.

Optimization of nucleic acid extraction and amplification of a thiamine biosynthesis gene fragment from selected Malaysian seaweeds.

Obtaining high-quality nucleic acid extracted from seaweeds is notoriously difficult due to contamination with polysaccharides and polyphenolic compounds after cell disruption. Specific methods need to be employed for RNA isolation in different seaweed species, and therefore studies of the thiamine biosynthesis pathway have been limited. Two selected Malaysian species which are highly abundant and underutilized, namely Gracilaria sp. and Padina sp., representing the red and brown seaweeds, respectively, were collected to develop optimized total RNA extraction methods. Prior to that, DNA was extracted, and amplification of the 18S rRNA gene and the THIC gene (encoding the first enzyme in the pyrimidine branch of the thiamine biosynthesis pathway) from the DNA template was successful in Gracilaria sp. only. RNA was then extracted from both seaweeds using three different existing methods, with some modifications, using cetyltrimethylammonium bromide, guanidine thiocyanate and sodium dodecyl sulphate. Methods I and III proved to be efficient for Padina sp. and Gracilaria sp., respectively, for the extraction of highly purified RNA, with A260/A280 values of 2.0 and 1.8. However, amplification of the housekeeping gene glyceraldehyde-3-phosphate dehydrogenase and the THIC gene was successful in only Gracilaria sp. cDNA derived from extracted RNA. Further modifications are required to improve the exploitation of nucleic acids from brown seaweeds, which has been proven to be difficult. This work should pave the way for molecular studies of seaweeds generally and for the elucidation, specifically, of the thiamine biosynthesis pathway.

A comparative analysis of RNA isolation methods optimized for high-throughput detection of viral pathogens in California’s regulatory and disease management program for citrus propagative materials

Citrus germplasm programs can benefit from high-throughput polymerase chain reaction (PCR)-based methods for the detection of graft-transmissible pathogens in propagative materials. These methods increase diagnostic capacity, and thus contribute to the prevention of disease spread from nurseries to citrus orchards. High quality nucleic acids, as determined by purity, concentration, and integrity, are a prerequisite for reliable PCR detection of citrus pathogens. Citrus tissues contain high levels of polyphenols and polysaccharides, which can affect nucleic acid quality and inhibit PCR reactions. Various commercially available RNA isolation methods are used for citrus and include: phenol-chloroform (TRIzol®, Thermo Fisher Scientific); silica columns (RNeasy® Plant Mini Kit, Qiagen); and magnetic beads-based methods (MagMAX™-96 Viral RNA Isolation Kit, Thermo Fisher Scientific). To determine the quality of RNA and its impact on the detection of graft-transmissible citrus pathogens in reverse transcription (RT) PCR-based assays, we compared these three RNA isolation methods. We assessed RNA purity, concentration, and integrity from citrus inoculated with different viruses and viroids. All three RNA isolation methods produced high quality RNA, and its use in different RT-PCR assays resulted in the detection of all targeted citrus viruses and viroids with no false positive or negative results. TRIzol® yielded RNA with the highest concentration and integrity values but some samples required serial dilutions to remove PCR inhibitors and detect the targeted pathogens. The RNeasy® kit produced the second highest concentration and purity of RNA, and similar integrity to TRIzol®. MagMAX™ isolation also provided high quality RNA but most importantly produced RNA with consistent results clustered around a median value for concentration, purity, and integrity. Subsequently, MagMAX™-96 was combined with the semi-automated MagMAX™ Express-96 Deep Well Magnetic Particle Processor, for high-throughput sample processing. MagMAX™-96 enabled the diagnostic laboratory of the Citrus Clonal Protection Program-National Clean Plant Network at the University of California, Riverside to process over 16,500 samples from citrus budwood source trees between 2010 and 2019. This high-throughput approach dramatically reduced the incidence of viroids in citrus nurseries and was key to the successful implementation of the mandatory Citrus Nursery Stock Pest Cleanliness Program in California.