High Pressure Processing Technology Research Articles

High‐pressure processing for inactivation of enzymes, microbes, and its effect on nutritional composition of tender coconut water

AbstractTender coconut water (TCW) processing has been a challenge and is often accompanied by challenges such as beneficial bioactive compound deterioration and enzymatic and non‐enzymatic browning initiation. Fresh TCW was treated with a combination of pressure (350–550 MPa) and treatment time (3–7 min). This study unveiled the potency of high‐pressure processing (HPP) in reducing undesirable enzyme activity, such as polyphenol oxidase (PPO) and peroxidase (POD) activity in TCW by up to 36.472% and 30.606%, respectively. The maximum loss of vitamin C was reported to be 7.84% at 550 MPa/7 min compared to the untreated one, which is very acceptable in terms of quality retention. The total phenolic content and antioxidant activities were well retained and increased in the HPP‐treated TCW samples. Similarly, the total and reducing sugar reduction was within 20%–25%. The findings of this investigation demonstrated the effectiveness of high‐pressure processing in preserving quality and reducing the activity of enzymes that cause deterioration in TCW. Moreover, the aerobic plate count (APC) and yeast and mold count (YM) were decreased significantly (p < 0.05) after 450 MPa/5 min treatment.Practical applicationsOver the years, the food industry has been facing a consistent challenge in perishable product processing (juices, milk, meat, etc.) to extend its shelf‐life while keeping its nutritional and sensory properties intact. This study presented a significant insight into TCW processing regarding enzyme, microbial inactivation, and nutritional property preservation using HPP technology. Moreover, from a quality perspective, this work enables the HPP‐treated TCW to be as close to a fresh one without any preservative addition. HPP technique is believed to appeal to industries that seek a green alternative technique to thermal processing (which makes processed foods unacceptable among consumers) to produce minimally treated foods on a commercial scale.

Effect of moderate hydrostatic pressure on crystallization of palm kernel stearin-sunflower oil model systems

Lipid crystallization under moderate hydrostatic pressure treatments (200 MPa, 20 °C, 1–24 h) was studied in palm kernel stearin (PS 100%) and its blends with sunflower oil (PS 80, 90 % w/w). Hyperbarically-crystallized samples exhibited significantly higher firmness, elastic modulus and critical stress values as compared to those of the samples crystallized at atmospheric pressure.These data indicate that moderate hydrostatic pressure favored the formation of a higher amount of small palm kernel stearin crystals as compared to those formed at atmospheric pressure. Pressurization did not affect fat polymorphism, but was able to enhance nucleation instead of crystal growth.This work clearly demonstrated the efficacy of moderate hydrostatic pressure in steering lipid crystallization, opening interesting possible applications of high-pressure processing technology in the fat manufacturing sector.

Elucidating the molecular mechanism of water migration in myosin gels of Nemipterus virgatus during low pressure coupled with heat treatment

The relationship between myosin denaturation, aggregation and water migration in Nemipterus virgatus myosin gels with different treatment processes under optimal low pressure coupled with heat treatment was investigated to clarify the molecular mechanism of water migration. With the different treatment processes, the proportion of bound water of the myosin gels increased significantly (P < 0.05). Denaturation of myosin S1 sub-fragments and α-helical unfolding during different treatment processes led to an increase in β-sheets content. These promote increased exposure of Try residues and hydrophobic groups of myosin, formation of clathrate hydrates, and reduced mobility of bound water. Furthermore, hydrophobic interactions and disulfide bonds caused the head-head and head-hinge to coalesce into a 3D honeycomb network with greater fractal dimension, less lacunarity, smaller water hole diameter and more water holes. This increased the capillary pressure experienced by the bound water, causing immobile water to migrate towards the bound water. The present study may be necessary to improve the mechanism of water migration in protein gel systems and to promote the industrial application of high pressure processing technology in surimi-based foods.

Recovery of Protein from Industrial Hemp Waste (Cannabis sativa, L.) Using High-Pressure Processing and Ultrasound Technologies.

Hemp seeds are currently used mainly for oil extraction, generating waste that could be potentially exploited further as a source of proteins and other bioactives. This study aims to valorise hemp waste (Cannabis sativa, L.) from previous oil extraction as a source of protein by analysing the effect of high-pressure processing (HPP) pre-treatments (0-600 MPa; 4-8 min) combined with conventional or ultrasound-assisted extraction (UAE) methods on protein recovery/purity, amino acid composition, and protein structure. Overall, maximum protein recovery (≈62%) was achieved with HPP (200 MPa, 8 min) with UAE. The highest protein purity (≈76%) was achieved with HPP (200 MPa, 4 min) with UAE. Overall, UAE improved the extraction of all amino acids compared to conventional extraction independently of HPP pre-treatments. Arg/Lys ratios of the protein isolates ranged between 3.78 and 5.34, higher than other vegetable protein sources. SDS-PAGE did not show visible differences amongst the protein isolates. These results seem to indicate the advantages of the use of UAE for protein recovery in the food industry and the need for further studies to optimise HPP/UAE for an accurate estimation of processing costs and their effects on the composition and structure of proteins to contribute further to the circular economy.

Comparison of high-hydrostatic pressure and frozen treatments on raw freshwater clam marinated in soy sauce: Impact on microbiological and organoleptic qualities

The purpose of this study was to compare how the two different methods of food processing, high pressure processing (HPP) under 300–500 MPa for 3 min and freezing, affect the microbiological, chemical, and organoleptic qualities of soy sauce-marinated freshwater clams (Corbicula fluminea) during refrigeration. The aerobic plate count (APC), psychotropic bacteria count (PBC), Salmonella spp., and coliform of high pressure processed soy sauce-marinated clams (HPP marinated-clams) were obviously lower than conventionally frozen soy sauce-marinated clams (frozen marinated-clams), or were not detected. In addition, after all samples’ 15-day refrigeration period, HPP was found to significantly inhibit the growth of APC, PBC, Salmonella spp., and coliform, while the microbial counts of frozen marinated-clams increased gradually with time. However, the surface areas, moisture contents, and salt contents of all samples of both HPP marinated-clams and frozen marinated-clams slightly increased during refrigeration. Furthermore, the results of organoleptic analyses exhibited that the storage life of marinated clams can be increased from 9 days under freezing treatment to 15 days under HPP (300 MPa and 500 MPa). Using high-throughput sequencing, HPP treatment significantly changed the microbiota of marinated clam and delayed the spoilage process. Therefore, the study suggests using HPP at least 300 MPa for 3 min to effectively inhibit the microbial growth and significantly extend the storage life of the samples during the refrigeration period. This is a first study to use HPP technology to replace the traditional freezing technology in the application of raw soy sauce-marinated freshwater clam products, and at the same time, HTS was used to evaluate the changes of microbiota during refrigeration.

A novel strategy for producing low-sugar pomegranate jam with better anthocyanin stability: Combination of high-pressure processing and low methoxyl & amidated pectin

Low-sugar jams (LSJ) are promoted as a healthier food option due to the healthy trend, and significant color changes negatively affects the evaluation of these products. To reveal protective effect of low methoxyl & amidated pectin (LMA) on anthocyanin in jam treated by high-pressure processing (HPP), this study compared the changes in microbes and quality attributes of LSJ prepared with LMA and high-sugar pomegranate jam (HSJ) prepared with high methoxyl pectin (HMP) after HPP at 600 MPa for 5 min during accelerated storage at 35 °C for 30 days, and molecular dynamics simulation was conducted to reveal the interaction between LMA and anthocyanin. LSJ-HPP had better color quality with higher values of L*, a*, and total anthocyanin content (TAC), the corresponding percent polymeric color and browning index were 41% and 16% lower than those of HSJ-HPP, respectively. TAC in LSJ-HPP, HSJ, and HSJ-HPP decreased to 9.5, 8.6, and 6.0 mg/kg (pomegranate puree) after storage, respectively. Cyanidin-3-O-glucoside formed more H-bonds with LMA than HMP, while their total interaction energy and the binding frequency and number were also higher. This study provided a foundation for the processing and storage of high quality LSJ, and also broadened the application field of HPP technology.

Recent Progress in the Synergistic Bactericidal Effect of High Pressure and Temperature Processing in Fruits and Vegetables and Related Kinetics.

Traditional thermal processing is a widely used method to ensure food safety. However, thermal processing leads to a significant decline in food quality, especially in the case of fruits and vegetables. To overcome this drawback, researchers are extensively exploring alternative non-thermal High-Pressure Processing (HPP) technology to ensure microbial safety and retaining the sensory and nutritional quality of food. However, HPP is unable to inactivate the spores of some pathogenic bacteria; thus, HPP in conjunction with moderate- and low-temperature is employed for inactivating the spores of harmful microorganisms. Scope and approach: In this paper, the inactivation effect of high-pressure and high-pressure thermal processing (HPTP) on harmful microorganisms in different food systems, along with the bactericidal kinetics model followed by HPP in certain food samples, have been reviewed. In addition, the effects of different factors such as microorganism species and growth stage, process parameters and pressurization mode, and food composition on microbial inactivation under the combined high-pressure and moderate/low-temperature treatment were discussed. The establishment of a reliable bactericidal kinetic model and accurate prediction of microbial inactivation will be helpful for industrial design, development, and optimization of safe HPP and HPTP treatment conditions.

Encapsulation of Nutraceuticals in Yoghurt and Beverage Products Using the Ultrasound and High-Pressure Processing Technologies.

Dairy and beverage products are considered highly nutritious. The increase demand for added nutritional benefits within the food systems consumed by the consumers paves the pathway towards fortifying nutraceuticals into these products. However, nutraceuticals are highly unstable towards harsh processing conditions. In addition, the safety of dairy and beverage products plays a very important role. Therefore, various heat treatments are in practice. As the heat-treated dairy and beverage products tends to illustrate several alterations in their organoleptic characteristics and nutritional properties, the demand for alternative non-thermal processing technologies has increased extensively within the food industry. Ultrasound and high-pressure processing technologies are desirable for this purpose as well as a safe and non-destructive technology towards encapsulation of nutraceuticals into food systems. There are benefits in implementing these two technologies in the production of dairy and beverage products with encapsulants, such as manufacturing high-quality products with improved nutritional value while simultaneously enhancing the sensory characteristics such as flavour, taste, texture, and colour and attaining the microbial quality. The primary objective of this review is to provide detailed information on the encapsulation of nutraceuticals and mechanisms involved with using US and HPP technologies on producing encapsulated yoghurt and beverage products.

Multitarget preservation technologies for chemical-free sustainable meat processing.

Due to the growing consumer demand for safe and naturally processed meats, the meat industry is seeking novel methods to produce safe-to-consume meat products without affecting their sensory appeal. The green technologies can maintain the sensory and nutritive characteristics and ensure the microbial safety of processed meats and, therefore, can help to reduce the use of chemical preservatives in meat products. The use of chemical additives, especially nitrites in processed meat products, has become controversial because they may form carcinogenic N-nitrosamines, a few of which are suspected as cancer precursors. Thus, the objective of reducing or eliminating nitrite is of great interest to meat researchers and industries. This review, for the first time, discusses the influence of processing technologies such as microwave, irradiation, high-pressure thermal processing (HPTP) and multitarget preservation technology on the quality characteristics of processed meats, with a focus on their sensory quality. These emerging technologies can help in the alleviation of ingoing nitrite or formed nitrosamine contents in meat products. The multitarget preservation technology is an innovative way to enhance the shelf life of meat products through the combined use of different technologies/natural additives. The challenges and opportunities associated with the use of these technologies for processing meat are also reviewed.

High pressure processing technology of aquatic products

High-pressure processing is an emerging technology in the food industry. The application of high-pressure processing has shown a huge potential for improving the physicochemical, microbial, and sensory quality of aquatic products. The inactivation of microorganisms and autolytic enzymes by high-pressure processing results in an extension of fish muscles’ shelf life. High pressure inhibits the formation of putrefactive compounds and maintains the hardness of fish muscles, resulting in higher sensory quality compared to untreated muscle over storage time. However, the drawbacks such as discoloration, protein denaturation, and lipid oxidation could limit the application of high pressure on fish muscles. Besides, the gel formed by pressure-induction or high-pressure freezing/thawing of aquatic is being investigated intensively to obtain the benefits of high-pressure processing on aquatic products.

Comparison of the Effect of Hydrostatic and Dynamic High Pressure Processing on the Enzymatic Activity and Physicochemical Quality Attributes of 'Ataulfo' Mango Nectar.

The effects of hydrostatic (HHP) and dynamic (HPH) high-pressure treatments on the activity of pectin methylesterase (PME) and polyphenol oxidase (PPO) as well as the physicochemical quality attributes of ‘Ataulfo’ mango nectar were assessed. HHP reduced PME relative activity by 28% at 100 MPa for 5 min but increased PPO activity almost five-fold. Contrarily, HPH did not affect PME activity, but PPO was effectively reduced to 10% of residual activity at 300 MPa and at three passes. Color parameters (CIEL*a*b*), °hue, and chroma were differently affected by each type of high-pressure processing technology. The viscosity and fluid behavior were not affected by HHP, however, HPH changed the apparent viscosity at low dynamic pressure levels (100 MPa with one and three passes). The viscosity decreased at high shear rates in nectar samples, showing a shear-thinning effect. The results highlight how different effects can be achieved with each high-pressure technology; thus, selecting the most appropriate system for processing and preserving liquid foods like fruit beverages is recommended.

Effect of High-Pressure Processing on Fresh Sea Urchin Gonads in Terms of Shelf Life, Chemical Composition, and Microbiological Properties.

Paracentrotus lividus is a widespread sea urchin species appreciated worldwide for the taste of its fresh gonads. High-pressure processing (HPP) can provide a thermal equivalent to pasteurization, maintaining the organoleptic properties of the raw gonads. This study evaluated HPP technology’s effect at 350 MPa and 500 MPa on microbial inactivation and biochemical characteristics of P. lividus gonads. HPP at 350 MPa resulted in a higher decrease in protein and free amino acids associated with a loss of olfactory, color, and gustatory traits and a visual alteration of the texture. On the other hand, gonad samples stored for 40 days after treatments at 500 MPa showed a good organoleptic profile similar to fresh gonads. Furthermore, only 500 MPa effectively reduced mesophilic bacteria contamination among the two HPP treatments carried out. Total lipids increased during storage; however, the SAFA/PUFA rate was homogeneous during HPP trials ranging from 2.61–3.91 g/100 g. Total protein decreased more than 40% after HPP at 350 MPa, whereas, after 500 MPa, it remained stable for 20 days. The amount of free amino acid constantly decreased during storage after HPP at 350 MPa and remained constant at 500 MPa. HPP can effectively remove the bacterial flora and inactivate enzymes, maintaining the properties of the fresh sea urchin gonads.

High Pressure Processing Impact on Emerging Mycotoxins (ENNA, ENNA1, ENNB, ENNB1) Mitigation in Different Juice and Juice-Milk Matrices.

The aim of the present study was to investigate the potential of high-pressure processing (HPP) (600 MPa during 5 min) on emerging mycotoxins, enniatin A (ENNA), enniatin A1 (ENNA1), enniatin B (ENNB), enniatin B1 (ENNB1) reduction in different juice/milk models, and to compare it with the effect of a traditional thermal treatment (HT) (90 °C during 21 s). For this purpose, different juice models (orange juice, orange juice/milk beverage, strawberry juice, strawberry juice/milk beverage, grape juice and grape juice/milk beverage) were prepared and spiked individually with ENNA, ENNA1, ENNB and ENNB1 at a concentration of 100 µg/L. After HPP and HT treatments, ENNs were extracted from treated samples and controls employing dispersive liquid-liquid microextraction methodology (DLLME) and determined by liquid chromatography coupled to ion-trap tandem mass spectrometry (HPLC-MS/MS-IT). The results obtained revealed higher reduction percentages (11% to 75.4%) when the samples were treated under HPP technology. Thermal treatment allowed reduction percentages varying from 2.6% to 24.3%, at best, being ENNA1 the only enniatin that was reduced in all juice models. In general, no significant differences (p > 0.05) were observed when the reductions obtained for each enniatin were evaluated according to the kind of juice model, so no matrix effects were observed for most cases. HPP technology can constitute an effective tool in mycotoxins removal from juices.

High-Pressure Processing for Sustainable Food Supply

Sustainable food supply has gained considerable consumer concern due to the high percentage of spoilage microorganisms. Food industries need to expand advanced technologies that can maintain the nutritive content of foods, enhance the bio-availability of bioactive compounds, provide environmental and economic sustainability, and fulfill consumers’ requirements of sensory characteristics. Heat treatment negatively affects food samples’ nutritional and sensory properties as bioactives are sensitive to high-temperature processing. The need arises for non-thermal processes to reduce food losses, and sustainable developments in preservation, nutritional security, and food safety are crucial parameters for the upcoming era. Non-thermal processes have been successfully approved because they increase food quality, reduce water utilization, decrease emissions, improve energy efficiency, assure clean labeling, and utilize by-products from waste food. These processes include pulsed electric field (PEF), sonication, high-pressure processing (HPP), cold plasma, and pulsed light. This review describes the use of HPP in various processes for sustainable food processing. The influence of this technique on microbial, physicochemical, and nutritional properties of foods for sustainable food supply is discussed. This approach also emphasizes the limitations of this emerging technique. HPP has been successfully analyzed to meet the global requirements. A limited global food source must have a balanced approach to the raw content, water, energy, and nutrient content. HPP showed positive results in reducing microbial spoilage and, at the same time, retains the nutritional value. HPP technology meets the essential requirements for sustainable and clean labeled food production. It requires limited resources to produce nutritionally suitable foods for consumers’ health.

High Pressure Processing Impact on Alternariol and Aflatoxins of Grape Juice and Fruit Juice-Milk Based Beverages.

High-pressure processing (HPP) has emerged over the last 2 decades as a good alternative to traditional thermal treatment for food safety and shelf-life extension, supplying foods with similar characteristics to those of fresh products. Currently, HPP has also been proposed as a useful tool to reduce food contaminants, such as pesticides and mycotoxins. The aim of the present study is to explore the effect of HPP technology at 600 MPa during 5 min at room temperature on alternariol (AOH) and aflatoxin B1 (AFB1) mycotoxins reduction in different juice models. The effect of HPP has also been compared with a thermal treatment performed at 90 °C during 21 s. For this, different juice models, orange juice/milk beverage, strawberry juice/milk beverage and grape juice, were prepared and spiked individually with AOH and AFB1 at a concentration of 100 µg/L. After HPP and thermal treatments, mycotoxins were extracted from treated samples and controls by dispersive liquid–liquid microextraction (DLLME) and determined by HPLC-MS/MS-IT. The results obtained revealed reduction percentages up to 24% for AFB1 and 37% for AOH. Comparing between different juice models, significant differences were observed for AFB1 residues in orange juice/milk versus strawberry juice/milk beverages after HPP treatment. Moreover, HPP resulted as more effective than thermal treatment, being an effective tool to incorporate to food industry in order to reach mycotoxins reductions.

유제품에 이용되는 주요 열처리 조건

Heat treatment is a fundamental processing technology in the dairy industry. The main purpose of heat treatment is to destroy pathogenic and spoilage promoting microorganisms to ensure milk safety and shelf life. Despite the development of alternative technologies, such as high-pressure processing and pulse field technology for microbial destruction, heat treatment is widely used in the dairy industry and in other food processes to destroy microorganisms. Heat treatment has contributed greatly to the success of food preservation since Pasteur’s early discovery that heat treatment of wine and beer could prevent their deterioration, and since the introduction of milk pasteurization in the 1890s. In Korea, food labeling standards do not stratify heat treatments into low temperature, high temperature, and ultra-high temperature methods. Most milk is produced in Korea by pasteurization, with extended shelf life (ESL : 125––140°C / 1–10 s). Classification based on temperature (i.e. low, high, and ultra-high), is meaningless.

Increasing γ-Aminobutyric Acid Content in Vegetable Soybeans via High-Pressure Processing and Efficacy of Their Antidepressant-Like Activity in Mice.

This study applied high-pressure processing (HPP) technology to enrich the gamma aminobutyric acid (GABA) content in vegetable soybeans and evaluated its antidepressant efficacy on mice, with depression induced by the unpredictable chronic mild stress (UCMS) model. The optimal conditions for HPP, storage time, and storage temperature, as well as antidepressant-like effects of vegetable soybeans, were evaluated and discussed. HPP could effectively and significantly increase GABA content in soybean, with optimum conditions at 200 MPa. The GABA content in the whole vegetable soybean was 436.05 mg/100 g. In mice animal tests, the tail suspension test (TST) showed that the immobility time of the GABA group was significantly shorter than that of the control group. The total travel distance in the open field test (OFT) showed that depressed mice fed with the GABA feed exhibited exploratory behavior. The GABA group showed a significantly higher degree of sucrose preference than the control group. Both results indicate that the GABA feed could effectively alleviate depressive symptomatology. Regarding biochemical parameters, the fecal and serum corticosterone (CORT) levels in the control group increased to 104.86 pg/mg after the onset of depression. In contrast, the fecal CORT level in the GABA group was significantly reduced to 23.98 pg/mg and was comparable to that in the control group (33.38 pg/mg). Reduced serum CORT level in the GABA group suggests an improvement in depressive symptomatology. The serotonin concentration was maintained in the GABA group after the induction of depression, suggesting its preventive activity. The HPP GABA-enriched soybeans exerted modulatory effects on the behaviors of depressed mice and displayed a potential for commercialization.

High-pressure processing of meat: Molecular impacts and industrial applications.

High-pressure processing (HPP) has been the most adopted nonthermal processing technology in the food industry with a current ever-growing implementation, and meat products represent about a quarter of the HPP foods. The intensive research conducted in the last decades has described the molecular impacts of HPP on microorganisms and endogenous meat components such as structural proteins, enzyme activities, myoglobin and meat color chemistry, and lipids, resulting in the characterization of the mechanisms responsible for most of the texture, color, and oxidative changes observed when meat is submitted to HPP. These molecular mechanisms with major effect on the safety and quality of muscle foods are comprehensively reviewed. The understanding of the high pressure-induced molecular impacts has permitted a directed use of the HPP technology, and nowadays, HPP is applied as a cold pasteurization method to inactive vegetative spoilage and pathogenic microorganisms in ready-to-eat cold cuts and to extend shelf life, allowing the reduction of food waste and the gain of market boundaries in a globalized economy. Yet, other applications of HPP have been explored in detail, namely, its use for meat tenderization and for structure formation in the manufacturing of processed meats, though these two practices have scarcely been taken up by industry. This review condenses the most pertinent-related knowledge that can unlock the utilization of these two mainstream transformation processes of meat and facilitate the development of healthier clean label processed meats and a rapid method for achieving sous vide tenderness. Finally, scientific and technological challenges still to be overcome are discussed in order to leverage the development of innovative applications using HPP technology for the future meat industry.

Water and Pathogenic Viruses Inactivation—Food Engineering Perspectives

Water is an essential component of food structures and biological materials. The importance of water as a parameter affecting virion stability and inactivation has been recognized across disciplinary areas. The large number of virus species, differences in spreading, likelihood of foodborne infections, unknown infective doses, and difficulties of infective virus quantification are often limiting experimental approaches to establish accurate data required for detailed understanding of virions’ stability and inactivation kinetics in various foods. Furthermore, non-foodborne viruses, as shown by the SARS-CoV-2 (Covid-19) pandemic, may spread within the food chain. Traditional food engineering benefits from kinetic data on effects of relative humidity (RH) and temperature on virion inactivation. The stability of enteric viruses, human norovirus (HuNoV), and hepatitis A (HAV) virions in food materials and their resistance against inactivation in traditional food processing and preservation is well recognized. It appears that temperature-dependence of virus inactivation is less affected by virus strains than differences in temperature and RH sensitivity of individual virus species. Pathogenic viruses are stable at low temperatures typical of food storage conditions. A significant change in activation energy above typical protein denaturation temperatures suggests a rapid inactivation of virions. Furthermore, virus inactivation mechanisms seem to vary according to temperature. Although little is known on the effects of water on virions’ resistance during food processing and storage, dehydration, low RH conditions, and freezing stabilize virions. Enveloped virions tend to have a high stability at low RH, but low temperature and high RH may also stabilize such virions on metal and other surfaces for several days. Food engineering has contributed to significant developments in stabilization of nutrients, flavors, and sensitive components in food materials which provides a knowledge base for development of technologies to inactivate virions in foods and environment. Novel food processing, particularly high pressure processing (HPP) and cold plasma technologies, seem to provide efficient means for virion inactivation and food quality retention prior to packaging or food preservation by traditional technologies.

Evaluation of the economic and environmental sustainability of high pressure processing of foods

A comparative evaluation of the environmental/economic performance of High Pressure Processing (HPP) technology for food processing is made using Life Cycle Costing (LCC) and Life Cycle Assessment (LCA) methodologies. Thermal pasteurization (TP), in the form of indirect system (with energy recovery) and of retort process, and modified atmosphere packaging (MAP), are taken as benchmark during the evaluation, as traditional food processing technologies typically used to process orange juice (TP) and sliced Parma ham (MAP). Primary data on costs and consumption of HPP, TP and MAP plants were obtained from companies. Secondary data for LCA analysis was retrieved from the Ecoinvent 3.4 database and from available scientific literature.As a result of the assessment, HPP appears as more expensive than both TP processes, but turns out to have a lower environmental impact in almost all impact categories. Compared to MAP, HPP is less expensive and also has a lower impact in most of the impact categories, as MAP requires a significant amount of packaging materials and food gases. Industrial relevance: High pressure processing (HPP) is a well-known non-thermal technology, which since its introduction has had limited use, mainly due to the high cost of the electricity required for the process. Nowadays, however, new technologies in the food processing and new food product applications could make it more widely used. To correctly evaluate whether HPP technology is actually cost-effective and has low impact on the environment, detailed economic and environmental analyses have been carried out in this paper. Results are expected to enhance the use of HPP technology in industry.