High-pressure Gas Time Projection Research Articles

Design, characterization and installation of the NEXT-100 cathode and electroluminescence regions

NEXT-100 is currently being constructed at the Laboratorio Subterráneo de Canfranc in the Spanish Pyrenees and will search for neutrinoless double beta decay using a high-pressure gaseous time projection chamber (TPC) with 100 kg of xenon. Charge amplification is carried out via electroluminescence (EL) which is the process of accelerating electrons in a high electric field region causing secondary scintillation of the medium proportional to the initial charge. The NEXT-100 EL and cathode regions are made from tensioned hexagonal meshes of 1 m diameter. This paper describes the design, characterization, and installation of these parts for NEXT-100. Simulations of the electric field are performed to model the drift and amplification of ionization electrons produced in the detector under various EL region alignments and rotations. Measurements of the electrostatic breakdown voltage in air characterize performance under high voltage conditions and identify breakdown points. The electrostatic deflection of the mesh is quantified and fit to a first-principles mechanical model. Measurements were performed with both a standalone test EL region and with the NEXT-100 EL region before its installation in the detector. Finally, we describe the parts as installed in NEXT-100, following their deployment in Summer 2023.

Latest progress of PandaX-III neutrinoless double beta decay experiment

Neutrinoless double beta decay experiments are one of the most promising approaches to resolving the puzzle of neutrino mass generation. PandaX-III experiment searches the neutrinoless double beta decay of 136Xe with a high-pressure gaseous time projection chamber. A total amount of 140 kg enriched 136Xe under 10 bar will be loaded in the detector. Micromegas is used for charge collection with a high spatial resolution. Benefitting from the long event track in the gaseous detector, identification algorithms can significantly suppress the background rate. In this proceeding, the design and construction of the detector is presented, whose technologies have been successfully demonstrated by a prototype detector. The event classification algorithms were developed, suppressing the background events at a rate of about 300. Based on the result, we expect an exclusion sensitivity of 2.7×1026 yr (90% C.L.) for decay half life after 5 years’ exposure.

A novel front-end amplifier for gain-less charge readout in high-pressure gas TPC

This paper presents a novel low-noise front-end amplifier manufactured in a standard 130 nm CMOS process. The front-end amplifier is part of an integrated sensor, with an array of which, forms a charge readout plane in a high-pressure gaseous Time Projection Chamber (TPC) for 0νββ search. The novel front-end amplifier composed of a source-drain follower and a common-source amplifier is proposed. The potential of both the source and drain node of the input transistor follows its gate. Hence the effective input capacitance contributed by the input transistor is significantly reduced. A hexagon charge collection electrode with a diameter of 1 mm is connected to the input node of the front-end amplifier. The shielding technique is applied and the shielding metal is connected to the source or drain node of the input transistor. Therefore, the effective input capacitance contributed by the charge collection electrode is decreased. The extraction result shows that the input capacitance is decreased from the 4 pf down to 7.4 fF. A test chip has been designed and an equivalent noise charge of 33 e− is achieved from the simulations.

Dielectric strength of noble and quenched gases for high pressure time projection chambers

Dielectric breakdown strength is one of the critical performance metrics for pure gases and gas mixtures used in large, high pressure gas time projection chambers. In this paper we experimentally study dielectric breakdown strengths of several important time projection chamber working gases and gas-phase insulators over the pressure range 100 mbar to 10 bar, and gap sizes ranging from 0.1 to 10 mm. Gases characterized include argon, xenon, CO_2, CF_4, and mixtures 90-10 argon-CH_4, 90-10 argon-CO_2 and 99-1 argon-CF_4. We develop a theoretical model for high voltage breakdown based on microphysical simulations that use PyBoltz electron swarm Monte Carlo results as input to Townsend- and Meek-like discharge criteria. This model is shown to be highly predictive at high pressure, out-performing traditional Paschen–Townsend and Meek–Raether models significantly. At lower pressure-times-distance, the Townsend-like model is an excellent description for noble gases whereas the Meek-like model provides a highly accurate prediction for insulating gases.

Slow Control System for PandaX-III experiment

The PandaX-III experiment uses high pressure gaseous time projection chamber to search for the neutrinoless double beta decay of 136Xe. A modular slow control system (SCS) has been designed to monitor all the critical parameters of the experiment.It ensures the proper operation of the experiment and provides necessary information for data corrections. The main subsystems of the experiment will be constantly monitored by the data collection module of the SCS,which collects data from sensors and sends them to the centralized database.When an alarm message is generated by the anomaly detection module,it will be sent to an alert website and related on-call experts immediately.A demonstrator of the SCS has been built for the PandaX-III prototype detector.The long-term test of it provided valuable experience for the final design of the SCS for PandaX-III.

Off-Axis Characterisation of the CERN T10 Beam for low Momentum Proton Measurements with a High Pressure Gas Time Projection Chamber

We present studies of proton fluxes in the T10 beamline at CERN. A prototype high pressure gas time projection chamber (TPC) was exposed to the beam of protons and other particles, using the 0.8 GeV/c momentum setting in T10, in order to make cross section measurements of low energy protons in argon. To explore the energy region comparable to hadrons produced by GeV-scale neutrino interactions at oscillation experiments, i.e., near 0.1 GeV of kinetic energy, methods of moderating the T10 beam were employed: the dual technique of moderating the beam with acrylic blocks and measuring scattered protons off the beam axis was used to decrease the kinetic energy of incident protons, as well as change the proton/minimum ionising particle (MIP) composition of the incident flux. Measurements of the beam properties were made using time of flight systems upstream and downstream of the TPC. The kinetic energy of protons reaching the TPC was successfully changed from ∼0.3 GeV without moderator blocks to less than 0.1 GeV with four moderator blocks (40 cm path length). The flux of both protons and MIPs off the beam axis was increased. The ratio of protons to MIPs vary as a function of the off-axis angle allowing for possible optimisation of the detector to select the type of required particles. Simulation informed by the time of flight measurements show that with four moderator blocks placed in the beamline, (5.6 ± 0.1) protons with energies below 0.1 GeV per spill traversed the active TPC region. Measurements of the beam composition and energy are presented.

Conceptual Design of DUNE Near Detector Superconducting Magnet System

The Deep Underground Neutrino Experiment (DUNE) formed a near detector design group (NDDG) which was tasked with delivering a CDR by the end of 2019. The DUNE Near Detectors will be housed in an underground hall on the Fermilab site. The two main detector systems are a liquid argon detector and a high-pressure gas time projection chamber (HPgTPC). The HPgTPC requires a magnet that generates a 0.5 T solenoidal magnetic field in a large volume of 6 m diameter, and 5 m length. In this paper, we present a superconducting magnet system design. We investigated: an open air core magnet with three coils, and a five-coil s system having two active fringe field shielding coils. Coils positions were optimized to obtain the specified field homogeneity in the magnet good field region, while minimizing the Lorentz forces and the superconductor volume. We discuss the magnetic, mechanical, and thermal conceptual designs.

Topological background discrimination in the PandaX-III neutrinoless double beta decay experiment

The PandaX-III experiment plans to search for neutrinoless double beta decay (0νββ) of 136Xe in the China JinPing underground Laboratory (CJPL). The experiment will use a high pressure gaseous time projection chamber (TPC) to register both the energy and the electron track topology of an event. This article is devoted to demonstrate our particular detector setup capabilities for the identification of 0νββ and the consequent background reduction. As software tool we use REST, a framework developed for the reconstruction and simulation of TPC-based detector systems. We study the potential for background reduction by introducing appropriate parameters based on the properties of 0νββ events. We exploit for the first time not only the energy density of the electron track-ends, but also the electron scattering angles produced by an electron near the end of its trajectory. To implement this, we have added new algorithms for detector signal and track processing inside REST. Their assessment shows that background can be reduced by about 7 orders of magnitude while keeping 0νββ efficiency above 20% for the PandaX-III baseline readout scheme, a two-dimensional 3 mm pitch stripped readout. More generally, we use the potential of REST to handle 2D/3D data to assess the impact on signal-to-background significance at different detector granularities, and to validate the PandaX-III baseline choice. Finally, we demonstrate the additional potential to discriminate surface background events generated at the readout plane in the absence of t o , by making use of event parameters related with the diffusion of electrons.

PandaX-III: Searching for Neutrinoless Double Beta Decay with High Pressure Gaseous Time Projection Chambers

The PandaX-III (Particle And Astrophysical Xenon Experiment III) experiment will search for Neutrinoless Double Beta Decay (NLDBD) of 136Xe at the China Jin-Ping underground Laboratory II (CJPL-II). In the first phase of the experiment, a high pressure gas Time Projection Chamber (TPC) will contain 200 kg, 90% 136Xe enriched gas operated at 10 bar. Microbulk Micromegas, a fine pitch micro-pattern gas detector, will be used for charge readout and enable us to reconstruct tracks of NLDBD events with good energy and spatial resolution. With simulation, we demonstrate excellent background suppression capability with tracking information. In this proceeding, we will give an overview of recent progress of PandaX-III, including data taking of a 20 kg scale prototype TPC.

High voltage insulation and gas absorption of polymers in high pressure argon and xenon gases

High pressure gas time projection chambers (HPGTPCs) are made with a variety of materials, many of which still await proper characterization in high pressure noble gas environments. As HPGTPCs increase in size toward ton-scale detectors, assemblies become larger and more complex, creating a need for detailed understanding of how structural supports and high voltage insulators behave. This includes identification of materials with predictable mechanical properties and without surface charge accumulation that may lead to field deformation or sparking. This paper explores the mechanical and electrical effects of high pressure gas environments on insulating polymers PTFE, HDPE, PEEK, POM and UHMW in argon and xenon, including studying gas absorption, swelling and high voltage insulation strength.

Signal-background discrimination with convolutional neural networks in the PandaX-III experiment using MC simulation

The PandaX-III experiment will search for neutrinoless double beta decay of $^{136}$Xe with high pressure gaseous time projection chambers at the China Jin-Ping underground Laboratory. The tracking feature of gaseous detectors helps suppress the background level, resulting in the improvement of the detection sensitivity. We study a method based on the convolutional neural networks to discriminate double beta decay signals against the background from high energy gammas generated by $^{214}$Bi and $^{208}$Tl decays based on detailed Monte Carlo simulation. Using the 2-dimensional projections of recorded tracks on two planes, the method successfully suppresses the background level by a factor larger than 100 with a high signal efficiency. An improvement of $62\%$ on the efficiency ratio of $\epsilon_{s}/\sqrt{\epsilon_{b}}$ is achieved in comparison with the baseline in the PandaX-III conceptual design report.

Three-dimensional convolutional neural networks for neutrinoless double-beta decay signal/background discrimination in high-pressure gaseous Time Projection Chamber

In the search for neutrinoless double-beta decay, the high-pressure gaseous Time Projection Chamber has a distinct advantage, because the ionization charge tracks produced by particle interactions are extended and the detector captures the full three-dimensional charge distribution with appropriate charge readout systems. Such information of tracks provides a crucial extra-handle for discriminating signal events against backgrounds. In this paper, we constructed a toy model to demonstrate where the discrimination power comes from and how much of it the neural network models have already harnessed. Then we adapted 3-dimensional convolutional and residual neural networks on the simulated double-beta and background charge tracks and tested their capabilities in classifying these two types of events. We show that both the 3D structure and the overall depth of the neural networks significantly improve the accuracy of the classifier and lead to results better than previous works. We also studied their performance under various spatial granularities as well as different diffusion and noise conditions. The results indicate that the methods are stable and generalize well despite varying experimental conditions.

Design and commissioning of a 600 L Time Projection Chamber with Microbulk Micromegas

We report the design, construction, and initial commissioning results of a large high pressure gaseous Time Projection Chamber (TPC) with Micromegas modules for charge readout. The detector vessel has an inner volume of about 600 L and an active volume of 270 L. At 10 bar operating pressure, the active volume contains about 20 kg of xenon gas and can image charged particle tracks. Drift electrons are collected by the charge readout plane, which accommodates a tessellation of seven Micromegas modules. Each of the Micromegas covers a square of 20 cm by 20 cm. A new type of Microbulk Micromegas is chosen for this application due to its good gain uniformity and low radioactive contamination. Initial commissioning results with 1 Micromegas module running with 1 bar argon and isobutane gas mixture and 5 bar xenon and trimethylamine (TMA) gas mixture are reported. We also recorded extended background tracks from cosmic ray events and highlighted the unique tracking feature of this gaseous TPC.

PandaX-III: Searching for neutrinoless double beta decay with high pressure 136Xe gas time projection chambers

Searching for the Neutrinoless Double Beta Decay (NLDBD) is now regarded as the topmost promising technique to explore the nature of neutrinos after the discovery of neutrino masses in oscillation experiments. PandaX-III (Particle And Astrophysical Xenon Experiment III) will search for the NLDBD of $^{136}$Xe at the China Jin Ping underground Laboratory (CJPL). In the first phase of the experiment, a high pressure gas Time Projection Chamber (TPC) will contain 200 kg, 90% $^{136}$Xe enriched gas operated at 10 bar. Fine pitch micro-pattern gas detector (Microbulk Micromegas) will be used at both ends of the TPC for the charge readout with a cathode in the middle. Charge signals can be used to reconstruct tracks of NLDBD events and provide good energy and spatial resolution. The detector will be immersed in a large water tank to ensure $\sim$5 m of water shielding in all directions. The second phase, a ton-scale experiment, will consist of five TPCs in the same water tank, with improved energy resolution and better control over backgrounds.

Dark matter directionality revisited with a high pressure xenon gas detector

An observation of the anisotropy of dark matter interactions in a direction-sensitive detector would provide decisive evidence for the discovery of galactic dark matter. Directional information would also provide a crucial input to understanding its distribution in the local Universe. Most of the existing directional dark matter detectors utilize particle tracking methods in a low-pressure gas time projection chamber. These low pressure detectors require excessively large volumes in order to be competitive in the search for physics beyond the current limit. In order to avoid these volume limitations, we consider a novel proposal, which exploits a columnar recombination effect in a high-pressure gas time projection chamber. The ratio of scintillation to ionization signals observed in the detector carries the angular information of the particle interactions. In this paper, we investigate the sensitivity of a future directional detector focused on the proposed high-pressure Xenon gas time projection chamber. We study the prospect of detecting an anisotropy in the dark matter velocity distribution. We find that tens of events are needed to exclude an isotropic distribution of dark matter interactions at 95% confidence level in the most optimistic case with head-to-tail information. However, one needs at least 10-20 times more events without head-to-tail information for light dark matter below ∼50 GeV. For an intermediate mass range, we find it challenging to observe an anisotropy of the dark matter distribution. Our results also show that the directional information significantly improves precision measurements of dark matter mass and the elastic scattering cross section for a heavy dark matter.

Status of NEXT-100 Experiment

NEXT is an experiment to search for neutrinoless double beta decays in Xenon. The detector is a 100kg enriched 136Xe high pressure gas time projection chamber (TPC). It is under construction and it will be installed at the Canfranc Underground Laboratory (Spain). The experiment combines an excellent energy resolution (better than 1% FWHM at Qββ) and a topological reconstruction of the electrons. Due to the cost and scalability, NEXT concept is adequate for the next generation of double beta decay experiments.