In high-power grid-connected inverter for new energy power generation system, low switching frequency makes the control loop, <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">LCL</i> -filter resonant peak and sideband harmonics generated by modulation coupled, so that the parameter design of filter and controller affects each other. This increases the difficulty of design of filter parameters and controller parameters. To solve this problem, an accurate current harmonic calculation method based on harmonic state-space model and considering switching frequency and control delay is proposed in this article firstly. Secondly, based on the above model, the parameter optimization process considering current harmonic distortion rate, filter cost and so on is constructed. The integrated optimization design of filter and controller parameters of low-switching-frequency <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">LCL</i> grid-connected inverter is completed through intelligent algorithm. Thus the filter cost is minimized on the premise that inverter performances meet the specific requirements. In addition, considering the non-ideal characteristic of grid, a scheme of integrated parameter design which can adapt to the large-scale change of grid strength is proposed. Finally, the effectiveness of the proposed method and scheme is verified by simulation and experiment.
Read full abstract7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access